From: Daniel Evans <photonthunder@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] boot.bin on SD Card for SAMA5D3 Xplained
Date: Tue, 4 Dec 2018 17:15:55 -0700 [thread overview]
Message-ID: <F4BAE807-3489-4F6A-9F05-F6023E3DF8D2@gmail.com> (raw)
Trying to get uboot SPL boot.bin to run on an SD card for the sama5d3 xplained board. All I get is RomBOOT and no other messages. I have tried throwing in a couple test pins to toggle in board_early_init_f but still not getting any debug. I can get at91bootstrap to produce a boot.bin that works on the sama5d3 xplained so I am assuming I don’t have a bad board. My boot partition is FAT16. To compile I just run the following on Debian Buster :
make mrproper
make sama5d3_xplained_mmc_defconfig
make
Cross Compiler is gcc-linaro-6.4.1-2018.05-x86_64_arm-linux-gnueabihf
When finished compiling I just copy the boot.bin to my BOOT partition.
Has to be something obvious that I am missing. Any insight is appreciated…
Dan
next reply other threads:[~2018-12-05 0:15 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-05 0:15 Daniel Evans [this message]
2018-12-05 14:36 ` [U-Boot] boot.bin on SD Card for SAMA5D3 Xplained Eugen.Hristev at microchip.com
2018-12-05 18:08 ` Daniel Evans
2018-12-05 20:38 ` Robert Nelson
2018-12-06 8:02 ` Eugen.Hristev at microchip.com
2018-12-08 2:37 ` Derald D. Woods
2018-12-08 19:49 ` [U-Boot] [PATCH] ARM: at91: Fix 'boot.bin' generation when CONFIG_SD_BOOT is enabled Derald D. Woods
2018-12-10 8:32 ` Eugen.Hristev at microchip.com
2018-12-10 13:01 ` Derald D. Woods
2018-12-10 14:03 ` Eugen.Hristev at microchip.com
2018-12-10 14:54 ` Derald Woods
2018-12-10 15:14 ` Eugen.Hristev at microchip.com
2018-12-11 5:48 ` Derald D. Woods
2018-12-15 7:36 ` [U-Boot] [PATCH] ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig Derald D. Woods
2018-12-28 0:04 ` Derald Woods
2019-01-07 9:40 ` Eugen.Hristev at microchip.com
2019-01-10 1:00 ` Derald Woods
2019-01-11 11:27 ` Eugen.Hristev at microchip.com
2019-01-11 16:51 ` Derald Woods
2019-01-11 16:53 ` Derald Woods
2019-01-18 8:37 ` Eugen.Hristev at microchip.com
2019-01-19 3:26 ` Derald D. Woods
2019-01-19 20:02 ` [U-Boot] [PATCH 0/2] ARM: at91: NAND PMECC Kconfig conversion Derald D. Woods
2019-01-19 20:02 ` [U-Boot] [PATCH 1/2] nand: atmel: Replace SYS_NAND_ECC_BASE with ATMEL_BASE_ECC Derald D. Woods
2019-01-19 20:02 ` [U-Boot] [PATCH 2/2] ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig Derald D. Woods
2019-01-19 23:29 ` [U-Boot] [PATCH 0/2] ARM: at91: NAND PMECC Kconfig conversion Tom Rini
2019-01-20 0:50 ` Derald Woods
2019-01-20 3:37 ` [U-Boot] [PATCH v2 0/1] " Derald D. Woods
2019-01-20 3:37 ` [U-Boot] [PATCH v3 1/1] ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig Derald D. Woods
2019-01-20 12:57 ` Tom Rini
2019-01-20 14:25 ` Derald Woods
2019-01-21 16:58 ` [U-Boot] " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=F4BAE807-3489-4F6A-9F05-F6023E3DF8D2@gmail.com \
--to=photonthunder@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.