From: Miro Hodak <mhodak127@gmail.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: "Raymond Yau" <superquad.vortex2@gmail.com>,
basinilya@gmail.com, "Manolo Díaz" <diaz.manolo@gmail.com>,
alsa-devel@alsa-project.org
Subject: Re: HD-audio regression after commit 34588709af61be1550b4e2bcee5c85d0ac4f34d4
Date: Mon, 21 Jan 2013 03:54:24 -0500 [thread overview]
Message-ID: <CA+S_cwrxC3=_H-yzr166ZJQ1GqHZMUVqX3WFB6L_wcOOjC23BA@mail.gmail.com> (raw)
In-Reply-To: <s5h8v7nymn7.wl%tiwai@suse.de>
On Mon, Jan 21, 2013 at 3:18 AM, Takashi Iwai <tiwai@suse.de> wrote:
> At Sun, 20 Jan 2013 14:54:39 -0500,
> Miro Hodak wrote:
> >
> > >
> >
> > Not always, most labels are one word long and can be open to different
> > interpretations. In alsamixer, ordering of capture controls is the
> > following:
> >
> > Master Headphon PCM Front Front Mi Surround Center LFE
> > Side Line Boo S/PDIF S/PDIF D Auto-Mut Independ <Rear Mic>
> >
> > and thus "Front" is next to "Front Mi" - that should connect at the
> front I
> > assume - rather then to other outputs at the back. Thus it is very easy
> to
> > get confused.
>
> I see. Yes, the usage of the word "front" has been a problem since
> long time ago, basically because it can mean two different things: the
> position of the jack and the channel location. But, this has been so,
> thus it's no regression to fix urgently.
>
>
> > Here are outputs as specified in my MB manual and my attempt to pair them
> > to items in alsamixer (Capture only):
> >
> > MB description Alsa control (capture)
> > BACK PORTS:
> > Line In Line Boost (its
> > boost only, I know)
> > Front Speaker Out Front
> > Mic In Rear Mic Boost
> > Center/Subwoofer Center
> > Rear Speaker Out ???
> > Side Speaker Out Side
> >
> > FRONT PORTS:
> > Headphone Out Headphone
> > Front Mic In Front Mic Boost
> >
> > There are two items that have not been assigned - Surround and LFE,
> > presumably one of them should correspond to the "Rear Speaker Out" for
> > which I could not identify ALSA control. Not being familiar with more
> than
> > 2-channle audio, I do not know how to assign these.
>
> "Surround" corresponds to the rear channel in ALSA term.
> "LFE" is a more official name of subwoofer.
>
>
> Takashi
>
Thanks for that explanation.
I have been playing with Independent HP feature and while I can get it to
work in aplay and mplayer, it does not seem to work on vlc and Skype. Both
applications seem to have options for sending sound to HPs ("AD1989B Analog
Front Speakers" or "AD1989B Analog (hw: 0,2)" - Skype only), but none of
those options sends sound to the HPs. Any thoughts on this?
next prev parent reply other threads:[~2013-01-21 8:54 UTC|newest]
Thread overview: 91+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-13 18:05 HD-audio regression after commit 34588709af61be1550b4e2bcee5c85d0ac4f34d4 Miro Hodak
2013-01-14 3:42 ` Raymond Yau
2013-01-14 11:03 ` Takashi Iwai
2013-01-14 13:46 ` Raymond Yau
2013-01-14 14:18 ` Takashi Iwai
2013-01-15 7:59 ` Takashi Iwai
2013-01-16 2:04 ` Raymond Yau
2013-01-16 6:47 ` Takashi Iwai
2013-01-16 7:19 ` Raymond Yau
2013-01-16 7:24 ` Takashi Iwai
2013-01-14 11:37 ` Clemens Ladisch
2013-01-14 12:31 ` Manolo Díaz
2013-01-14 12:48 ` Takashi Iwai
2013-01-14 12:59 ` Manolo Díaz
2013-01-14 13:03 ` Takashi Iwai
2013-01-14 13:10 ` Manolo Díaz
2013-01-14 16:23 ` Manolo Díaz
2013-01-15 0:42 ` Raymond Yau
2013-01-15 8:53 ` Manolo Díaz
2013-01-16 1:52 ` Raymond Yau
2013-01-16 8:49 ` Manolo Díaz
2013-01-16 8:54 ` Takashi Iwai
2013-01-16 12:37 ` Raymond Yau
2013-01-16 12:39 ` Manolo Díaz
2013-01-16 12:54 ` Takashi Iwai
2013-01-16 13:04 ` Manolo Díaz
2013-01-16 13:16 ` Takashi Iwai
2013-01-16 13:55 ` Manolo Díaz
2013-01-16 14:20 ` Takashi Iwai
2013-01-17 3:51 ` Raymond Yau
2013-01-17 6:30 ` Takashi Iwai
2013-01-17 6:40 ` Raymond Yau
2013-01-17 6:49 ` Takashi Iwai
2013-01-17 8:10 ` Miro Hodak
2013-01-17 9:04 ` Takashi Iwai
2013-01-17 9:24 ` Miro Hodak
2013-01-17 9:29 ` Takashi Iwai
2013-01-17 9:42 ` Miro Hodak
2013-01-17 9:55 ` Takashi Iwai
2013-01-17 10:17 ` Miro Hodak
2013-01-17 10:21 ` Takashi Iwai
2013-01-17 10:32 ` Miro Hodak
2013-01-17 11:09 ` Takashi Iwai
2013-01-17 12:49 ` Raymond Yau
2013-01-17 14:59 ` Miro Hodak
2013-01-17 15:29 ` Raymond Yau
2013-01-17 15:33 ` hda_analyzer (was: Re: HD-audio regression after commit 34588709af61be1550b4e2bcee5c85d0ac4f34d4) David Henningsson
2013-01-17 15:32 ` HD-audio regression after commit 34588709af61be1550b4e2bcee5c85d0ac4f34d4 Takashi Iwai
2013-01-17 18:12 ` Manolo Díaz
2013-01-17 19:51 ` Miro Hodak
2013-01-17 21:12 ` ALSA versions versus kernel versions Daniel Griscom
2013-01-17 20:16 ` HD-audio regression after commit 34588709af61be1550b4e2bcee5c85d0ac4f34d4 Takashi Iwai
[not found] ` <20130117214043.5a1574ee@gmail.com>
2013-01-18 4:20 ` Miro Hodak
2013-01-18 7:04 ` Takashi Iwai
2013-01-18 7:31 ` Miro Hodak
2013-01-18 8:08 ` Manolo Díaz
2013-01-18 8:14 ` Miro Hodak
2013-01-18 10:17 ` Takashi Iwai
2013-01-18 12:37 ` Manolo Díaz
2013-01-18 13:49 ` Takashi Iwai
2013-01-18 14:49 ` Raymond Yau
2013-01-18 15:30 ` Takashi Iwai
2013-01-18 16:48 ` Manolo Díaz
2013-01-18 16:58 ` Takashi Iwai
2013-01-18 17:51 ` Manolo Díaz
2013-01-18 18:20 ` Manolo Díaz
2013-01-18 18:45 ` Takashi Iwai
[not found] ` <CA+S_cwrH6mjunDsn2w76Vpyk7XovOKpH0k_KoU_8SXjmisLAYw@mail.gmail.com>
2013-01-19 5:49 ` Raymond Yau
2013-01-19 11:12 ` Takashi Iwai
2013-01-19 11:11 ` Takashi Iwai
2013-01-20 19:54 ` Miro Hodak
2013-01-21 4:01 ` Raymond Yau
2013-01-21 8:18 ` Takashi Iwai
2013-01-21 8:54 ` Miro Hodak [this message]
2013-01-21 9:18 ` Raymond Yau
2013-01-21 17:08 ` Miro Hodak
2013-01-21 17:29 ` Takashi Iwai
2013-01-21 17:44 ` Miro Hodak
2013-01-21 19:11 ` Miro Hodak
2013-01-21 20:21 ` Takashi Iwai
2013-01-22 7:05 ` Takashi Iwai
2013-01-22 8:14 ` Miro Hodak
2013-01-22 8:58 ` Takashi Iwai
2013-01-22 10:06 ` Miro Hodak
2013-01-22 10:12 ` Takashi Iwai
2013-01-19 2:39 ` Raymond Yau
2013-01-19 11:09 ` Takashi Iwai
2013-01-19 12:37 ` Raymond Yau
2013-01-19 16:56 ` Takashi Iwai
2013-01-18 7:43 ` Raymond Yau
2013-01-15 7:27 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CA+S_cwrxC3=_H-yzr166ZJQ1GqHZMUVqX3WFB6L_wcOOjC23BA@mail.gmail.com' \
--to=mhodak127@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=basinilya@gmail.com \
--cc=diaz.manolo@gmail.com \
--cc=superquad.vortex2@gmail.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.