* [PATCH v4] soc: ti: smartreflex: Use platform_get_irq_optional() to get the interrupt
@ 2022-01-04 13:45 ` Lad Prabhakar
0 siblings, 0 replies; 6+ messages in thread
From: Lad Prabhakar @ 2022-01-04 13:45 UTC (permalink / raw)
To: Nishanth Menon, Santosh Shilimkar
Cc: Rob Herring, Andy Shevchenko, Prabhakar, Lad Prabhakar, linux-pm,
linux-kernel, linux-arm-kernel
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_optional().
While at it return 0 instead of returning ret in the probe success path.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v3->v4:
* Used dev_err_probe() to print error message
* Returning 0 in probe success path.
v2->v3
* Switch back to platform_get_irq_optional()
* Only print error in case of error, and not when interrupt is missing.
v1->v2
* Updated commit message
* Drop check for IRQ0
* Switched to using platform_get_irq() so that the probe won't
fail silently as requested by Nishanth.
v1:
* https://www.spinics.net/lists/arm-kernel/msg942549.html
---
drivers/soc/ti/smartreflex.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/soc/ti/smartreflex.c b/drivers/soc/ti/smartreflex.c
index b5b2fa538d5c..a219c003a63f 100644
--- a/drivers/soc/ti/smartreflex.c
+++ b/drivers/soc/ti/smartreflex.c
@@ -819,7 +819,7 @@ static int omap_sr_probe(struct platform_device *pdev)
{
struct omap_sr *sr_info;
struct omap_sr_data *pdata = pdev->dev.platform_data;
- struct resource *mem, *irq;
+ struct resource *mem;
struct dentry *nvalue_dir;
int i, ret = 0;
@@ -844,7 +844,13 @@ static int omap_sr_probe(struct platform_device *pdev)
if (IS_ERR(sr_info->base))
return PTR_ERR(sr_info->base);
- irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ ret = platform_get_irq_optional(pdev, 0);
+ if (ret < 0 && ret != -ENXIO) {
+ dev_err_probe(&pdev->dev, ret, "%s: failed to get IRQ resource\n", __func__);
+ return ret;
+ }
+ if (ret > 0)
+ sr_info->irq = ret;
sr_info->fck = devm_clk_get(pdev->dev.parent, "fck");
if (IS_ERR(sr_info->fck))
@@ -870,9 +876,6 @@ static int omap_sr_probe(struct platform_device *pdev)
sr_info->autocomp_active = false;
sr_info->ip_type = pdata->ip_type;
- if (irq)
- sr_info->irq = irq->start;
-
sr_set_clk_length(sr_info);
list_add(&sr_info->node, &sr_list);
@@ -926,7 +929,7 @@ static int omap_sr_probe(struct platform_device *pdev)
}
- return ret;
+ return 0;
err_debugfs:
debugfs_remove_recursive(sr_info->dbg_dir);
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v4] soc: ti: smartreflex: Use platform_get_irq_optional() to get the interrupt
@ 2022-01-04 13:45 ` Lad Prabhakar
0 siblings, 0 replies; 6+ messages in thread
From: Lad Prabhakar @ 2022-01-04 13:45 UTC (permalink / raw)
To: Nishanth Menon, Santosh Shilimkar
Cc: Rob Herring, Andy Shevchenko, Prabhakar, Lad Prabhakar, linux-pm,
linux-kernel, linux-arm-kernel
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_optional().
While at it return 0 instead of returning ret in the probe success path.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v3->v4:
* Used dev_err_probe() to print error message
* Returning 0 in probe success path.
v2->v3
* Switch back to platform_get_irq_optional()
* Only print error in case of error, and not when interrupt is missing.
v1->v2
* Updated commit message
* Drop check for IRQ0
* Switched to using platform_get_irq() so that the probe won't
fail silently as requested by Nishanth.
v1:
* https://www.spinics.net/lists/arm-kernel/msg942549.html
---
drivers/soc/ti/smartreflex.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/soc/ti/smartreflex.c b/drivers/soc/ti/smartreflex.c
index b5b2fa538d5c..a219c003a63f 100644
--- a/drivers/soc/ti/smartreflex.c
+++ b/drivers/soc/ti/smartreflex.c
@@ -819,7 +819,7 @@ static int omap_sr_probe(struct platform_device *pdev)
{
struct omap_sr *sr_info;
struct omap_sr_data *pdata = pdev->dev.platform_data;
- struct resource *mem, *irq;
+ struct resource *mem;
struct dentry *nvalue_dir;
int i, ret = 0;
@@ -844,7 +844,13 @@ static int omap_sr_probe(struct platform_device *pdev)
if (IS_ERR(sr_info->base))
return PTR_ERR(sr_info->base);
- irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ ret = platform_get_irq_optional(pdev, 0);
+ if (ret < 0 && ret != -ENXIO) {
+ dev_err_probe(&pdev->dev, ret, "%s: failed to get IRQ resource\n", __func__);
+ return ret;
+ }
+ if (ret > 0)
+ sr_info->irq = ret;
sr_info->fck = devm_clk_get(pdev->dev.parent, "fck");
if (IS_ERR(sr_info->fck))
@@ -870,9 +876,6 @@ static int omap_sr_probe(struct platform_device *pdev)
sr_info->autocomp_active = false;
sr_info->ip_type = pdata->ip_type;
- if (irq)
- sr_info->irq = irq->start;
-
sr_set_clk_length(sr_info);
list_add(&sr_info->node, &sr_list);
@@ -926,7 +929,7 @@ static int omap_sr_probe(struct platform_device *pdev)
}
- return ret;
+ return 0;
err_debugfs:
debugfs_remove_recursive(sr_info->dbg_dir);
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH v4] soc: ti: smartreflex: Use platform_get_irq_optional() to get the interrupt
2022-01-04 13:45 ` Lad Prabhakar
@ 2022-01-04 14:48 ` Andy Shevchenko
-1 siblings, 0 replies; 6+ messages in thread
From: Andy Shevchenko @ 2022-01-04 14:48 UTC (permalink / raw)
To: Lad Prabhakar
Cc: Nishanth Menon, Santosh Shilimkar, Rob Herring, Prabhakar,
Linux PM, Linux Kernel Mailing List, linux-arm Mailing List
On Tue, Jan 4, 2022 at 3:45 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
>
> platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
> allocation of IRQ resources in DT core code, this causes an issue
> when using hierarchical interrupt domains using "interrupts" property
> in the node as this bypasses the hierarchical setup and messes up the
> irq chaining.
>
> In preparation for removal of static setup of IRQ resource from DT core
> code use platform_get_irq_optional().
>
> While at it return 0 instead of returning ret in the probe success path.
...
> + ret = platform_get_irq_optional(pdev, 0);
> + if (ret < 0 && ret != -ENXIO) {
> + dev_err_probe(&pdev->dev, ret, "%s: failed to get IRQ resource\n", __func__);
> + return ret;
return dev_err_probe(...); ?
> + }
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH v4] soc: ti: smartreflex: Use platform_get_irq_optional() to get the interrupt
@ 2022-01-04 14:48 ` Andy Shevchenko
0 siblings, 0 replies; 6+ messages in thread
From: Andy Shevchenko @ 2022-01-04 14:48 UTC (permalink / raw)
To: Lad Prabhakar
Cc: Nishanth Menon, Santosh Shilimkar, Rob Herring, Prabhakar,
Linux PM, Linux Kernel Mailing List, linux-arm Mailing List
On Tue, Jan 4, 2022 at 3:45 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
>
> platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
> allocation of IRQ resources in DT core code, this causes an issue
> when using hierarchical interrupt domains using "interrupts" property
> in the node as this bypasses the hierarchical setup and messes up the
> irq chaining.
>
> In preparation for removal of static setup of IRQ resource from DT core
> code use platform_get_irq_optional().
>
> While at it return 0 instead of returning ret in the probe success path.
...
> + ret = platform_get_irq_optional(pdev, 0);
> + if (ret < 0 && ret != -ENXIO) {
> + dev_err_probe(&pdev->dev, ret, "%s: failed to get IRQ resource\n", __func__);
> + return ret;
return dev_err_probe(...); ?
> + }
--
With Best Regards,
Andy Shevchenko
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH v4] soc: ti: smartreflex: Use platform_get_irq_optional() to get the interrupt
2022-01-04 14:48 ` Andy Shevchenko
@ 2022-01-04 15:05 ` Lad, Prabhakar
-1 siblings, 0 replies; 6+ messages in thread
From: Lad, Prabhakar @ 2022-01-04 15:05 UTC (permalink / raw)
To: Andy Shevchenko
Cc: Lad Prabhakar, Nishanth Menon, Santosh Shilimkar, Rob Herring,
Linux PM, Linux Kernel Mailing List, linux-arm Mailing List
On Tue, Jan 4, 2022 at 2:50 PM Andy Shevchenko
<andy.shevchenko@gmail.com> wrote:
>
> On Tue, Jan 4, 2022 at 3:45 PM Lad Prabhakar
> <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> >
> > platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
> > allocation of IRQ resources in DT core code, this causes an issue
> > when using hierarchical interrupt domains using "interrupts" property
> > in the node as this bypasses the hierarchical setup and messes up the
> > irq chaining.
> >
> > In preparation for removal of static setup of IRQ resource from DT core
> > code use platform_get_irq_optional().
> >
> > While at it return 0 instead of returning ret in the probe success path.
>
> ...
>
> > + ret = platform_get_irq_optional(pdev, 0);
> > + if (ret < 0 && ret != -ENXIO) {
>
> > + dev_err_probe(&pdev->dev, ret, "%s: failed to get IRQ resource\n", __func__);
> > + return ret;
>
> return dev_err_probe(...); ?
>
Argh my bad.
Cheers,
Prabhakar
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH v4] soc: ti: smartreflex: Use platform_get_irq_optional() to get the interrupt
@ 2022-01-04 15:05 ` Lad, Prabhakar
0 siblings, 0 replies; 6+ messages in thread
From: Lad, Prabhakar @ 2022-01-04 15:05 UTC (permalink / raw)
To: Andy Shevchenko
Cc: Lad Prabhakar, Nishanth Menon, Santosh Shilimkar, Rob Herring,
Linux PM, Linux Kernel Mailing List, linux-arm Mailing List
On Tue, Jan 4, 2022 at 2:50 PM Andy Shevchenko
<andy.shevchenko@gmail.com> wrote:
>
> On Tue, Jan 4, 2022 at 3:45 PM Lad Prabhakar
> <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> >
> > platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
> > allocation of IRQ resources in DT core code, this causes an issue
> > when using hierarchical interrupt domains using "interrupts" property
> > in the node as this bypasses the hierarchical setup and messes up the
> > irq chaining.
> >
> > In preparation for removal of static setup of IRQ resource from DT core
> > code use platform_get_irq_optional().
> >
> > While at it return 0 instead of returning ret in the probe success path.
>
> ...
>
> > + ret = platform_get_irq_optional(pdev, 0);
> > + if (ret < 0 && ret != -ENXIO) {
>
> > + dev_err_probe(&pdev->dev, ret, "%s: failed to get IRQ resource\n", __func__);
> > + return ret;
>
> return dev_err_probe(...); ?
>
Argh my bad.
Cheers,
Prabhakar
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-01-04 15:08 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-01-04 13:45 [PATCH v4] soc: ti: smartreflex: Use platform_get_irq_optional() to get the interrupt Lad Prabhakar
2022-01-04 13:45 ` Lad Prabhakar
2022-01-04 14:48 ` Andy Shevchenko
2022-01-04 14:48 ` Andy Shevchenko
2022-01-04 15:05 ` Lad, Prabhakar
2022-01-04 15:05 ` Lad, Prabhakar
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.