All of lore.kernel.org
 help / color / mirror / Atom feed
* [U-Boot] [PATCH 1/3] board/friendlyarm: Add support for friendlyarm nanopi neo4 board
@ 2019-06-04  8:47 Shyam Saini
  2019-06-04  8:47 ` [U-Boot] [PATCH 2/3] board/radxa: Add support for Radxa Rock Pi4 board Shyam Saini
                   ` (2 more replies)
  0 siblings, 3 replies; 6+ messages in thread
From: Shyam Saini @ 2019-06-04  8:47 UTC (permalink / raw)
  To: u-boot

This initial support includes:
        Linux v5.2-rc1
        Custom U-Boot
        Arm Trusted Firmware v2.0
        Buildroot default packages

Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
---
 .gitlab-ci.yml                              |  1 +
 DEVELOPERS                                  |  2 ++
 board/friendlyarm/nanopi-neo4/extlinux.conf |  4 +++
 board/friendlyarm/nanopi-neo4/genimage.cfg  | 22 ++++++++++++
 board/friendlyarm/nanopi-neo4/post-build.sh |  9 +++++
 board/friendlyarm/nanopi-neo4/readme.txt    | 53 +++++++++++++++++++++++++++
 configs/nanopi_neo4_defconfig               | 55 +++++++++++++++++++++++++++++
 7 files changed, 146 insertions(+)
 create mode 100644 board/friendlyarm/nanopi-neo4/extlinux.conf
 create mode 100644 board/friendlyarm/nanopi-neo4/genimage.cfg
 create mode 100755 board/friendlyarm/nanopi-neo4/post-build.sh
 create mode 100644 board/friendlyarm/nanopi-neo4/readme.txt
 create mode 100644 configs/nanopi_neo4_defconfig

diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 5ed1b8f4d5..2f41bcf7c6 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -181,6 +181,7 @@ nanopi_m1_defconfig: { extends: .defconfig }
 nanopi_m1_plus_defconfig: { extends: .defconfig }
 nanopi_m4_defconfig: { extends: .defconfig }
 nanopi_neo_defconfig: { extends: .defconfig }
+nanopi_neo4_defconfig: { extends: .defconfig }
 nexbox_a95x_defconfig: { extends: .defconfig }
 nitrogen6sx_defconfig: { extends: .defconfig }
 nitrogen6x_defconfig: { extends: .defconfig }
diff --git a/DEVELOPERS b/DEVELOPERS
index e2ea103d83..55fb022218 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -2044,10 +2044,12 @@ F:	package/wolfssl/
 N:     Shyam Saini <shyam.saini@amarulasolutions.com>
 F:	board/friendlyarm/nanopc-t4/
 F:	board/friendlyarm/nanopi-m4/
+F:	board/friendlyarm/nanopi-neo4/
 F:	board/olimex/a33_olinuxino/
 F:	board/orangepi/orangepi-rk3399/
 F:	configs/nanopc_t4_defconfig
 F:	configs/nanopi_m4_defconfig
+F:	configs/nanopi_neo4_defconfig
 F:	configs/olimex_a33_olinuxino_defconfig
 F:	configs/orangepi_rk3399_defconfig
 
diff --git a/board/friendlyarm/nanopi-neo4/extlinux.conf b/board/friendlyarm/nanopi-neo4/extlinux.conf
new file mode 100644
index 0000000000..91eef67fb9
--- /dev/null
+++ b/board/friendlyarm/nanopi-neo4/extlinux.conf
@@ -0,0 +1,4 @@
+label NanoPi Neo4 linux
+  kernel /boot/Image
+  devicetree /boot/rk3399-nanopi-neo4.dtb
+  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p1 rootwait
diff --git a/board/friendlyarm/nanopi-neo4/genimage.cfg b/board/friendlyarm/nanopi-neo4/genimage.cfg
new file mode 100644
index 0000000000..b8c1cd5220
--- /dev/null
+++ b/board/friendlyarm/nanopi-neo4/genimage.cfg
@@ -0,0 +1,22 @@
+image sdcard.img {
+	hdimage {
+	}
+
+	partition u-boot-tpl-spl-dtb {
+		in-partition-table = "no"
+		image = "u-boot-tpl-spl-dtb.img"
+		offset = 32K
+	}
+
+	partition u-boot-dtb {
+		in-partition-table = "no"
+		image = "u-boot.itb"
+		offset = 8M
+		size = 30M
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}
diff --git a/board/friendlyarm/nanopi-neo4/post-build.sh b/board/friendlyarm/nanopi-neo4/post-build.sh
new file mode 100755
index 0000000000..e852ba6adf
--- /dev/null
+++ b/board/friendlyarm/nanopi-neo4/post-build.sh
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+MKIMAGE=$HOST_DIR/bin/mkimage
+BOARD_DIR="$(dirname $0)"
+
+$MKIMAGE -n rk3399 -T rksd -d $BINARIES_DIR/u-boot-tpl-dtb.bin $BINARIES_DIR/u-boot-tpl-dtb.img
+cat $BINARIES_DIR/u-boot-tpl-dtb.img $BINARIES_DIR/u-boot-spl-dtb.bin > $BINARIES_DIR/u-boot-tpl-spl-dtb.img
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
diff --git a/board/friendlyarm/nanopi-neo4/readme.txt b/board/friendlyarm/nanopi-neo4/readme.txt
new file mode 100644
index 0000000000..07e3491459
--- /dev/null
+++ b/board/friendlyarm/nanopi-neo4/readme.txt
@@ -0,0 +1,53 @@
+Intro
+=====
+
+NanoPi Neo4 is a RK3399 SoC based ARM64 board.
+
+
+Official wiki: http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO4
+Mainline wiki: https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/neo4.html
+
+Build
+=====
+
+Run NanoPi Neo4 configuration
+
+  $ make nanopi_neo4_defconfig
+
+To build, run make comamnd.
+
+  $ make
+
+Files created in output directory
+=================================
+
+output/images
+
+├── bl31.bin
+├── bl31.elf
+├── Image
+├── rk3399-nanopi-neo4.dtb
+├── rootfs.ext2
+├── rootfs.ext4 -> rootfs.ext2
+├── rootfs.tar
+├── sdcard.img
+├── u-boot.bin
+├── u-boot.itb
+├── u-boot-spl-dtb.bin
+├── u-boot-tpl-dtb.bin
+├── u-boot-tpl-dtb.img
+└── u-boot-tpl-spl-dtb.img
+
+Creating bootable SD card:
+=========================
+
+Simply invoke (as root)
+
+  # dd if=output/images/sdcard.img of=/dev/sdX && sync
+
+Where X is your SD card device
+
+Serial console
+--------------
+
+Baudrate for this board is 1500000
diff --git a/configs/nanopi_neo4_defconfig b/configs/nanopi_neo4_defconfig
new file mode 100644
index 0000000000..f75f4367a9
--- /dev/null
+++ b/configs/nanopi_neo4_defconfig
@@ -0,0 +1,55 @@
+# Architecture
+BR2_aarch64=y
+BR2_cortex_a72_a53=y
+
+# Linux headers 5.1 series
+BR2_KERNEL_HEADERS_5_1=y
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/ARM-software/arm-trusted-firmware"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="v2.0"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/amarula/u-boot-amarula.git"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="dd2b180c457d35de195707dfa0b57a83b97fb275"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi-neo4-rk3399"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl-dtb.bin tpl/u-boot-tpl-dtb.bin"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="v5.2-rc1"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-nanopi-neo4"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+
+# Filesystem
+BR2_TARGET_GENERIC_HOSTNAME="NanoPi Neo4"
+BR2_TARGET_GENERIC_ISSUE="Welcome to NanoPi Neo4!"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="512M"
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-neo4/genimage.cfg"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-neo4/post-build.sh"
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 2/3] board/radxa: Add support for Radxa Rock Pi4 board
  2019-06-04  8:47 [U-Boot] [PATCH 1/3] board/friendlyarm: Add support for friendlyarm nanopi neo4 board Shyam Saini
@ 2019-06-04  8:47 ` Shyam Saini
  2019-06-04  8:47 ` [U-Boot] [PATCH 3/3] board/pine64: Add support for Pine64 RockPro64 board Shyam Saini
  2019-06-05 14:57 ` [U-Boot] [PATCH 1/3] board/friendlyarm: Add support for friendlyarm nanopi neo4 board Tom Rini
  2 siblings, 0 replies; 6+ messages in thread
From: Shyam Saini @ 2019-06-04  8:47 UTC (permalink / raw)
  To: u-boot

This initial support includes:
        Linux 5.1
        Custom U-Boot
        Arm Trusted Firmware v2.0
        Buildroot default packages

Tested-by: Akash Gajjar <akash@openedev.com>
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
---
 .gitlab-ci.yml                     |  1 +
 DEVELOPERS                         |  2 ++
 board/radxa/rock-pi4/extlinux.conf |  4 +++
 board/radxa/rock-pi4/genimage.cfg  | 22 +++++++++++++++
 board/radxa/rock-pi4/post-build.sh |  9 +++++++
 board/radxa/rock-pi4/readme.txt    | 51 +++++++++++++++++++++++++++++++++++
 configs/radxa_rock_pi4_defconfig   | 55 ++++++++++++++++++++++++++++++++++++++
 7 files changed, 144 insertions(+)
 create mode 100644 board/radxa/rock-pi4/extlinux.conf
 create mode 100644 board/radxa/rock-pi4/genimage.cfg
 create mode 100755 board/radxa/rock-pi4/post-build.sh
 create mode 100644 board/radxa/rock-pi4/readme.txt
 create mode 100644 configs/radxa_rock_pi4_defconfig

diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 2f41bcf7c6..e290d602ad 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -250,6 +250,7 @@ qemu_x86_64_defconfig: { extends: .defconfig }
 qemu_x86_defconfig: { extends: .defconfig }
 qemu_xtensa_lx60_defconfig: { extends: .defconfig }
 qemu_xtensa_lx60_nommu_defconfig: { extends: .defconfig }
+radxa_rock_pi4_defconfig: { extends: .defconfig }
 raspberrypi0_defconfig: { extends: .defconfig }
 raspberrypi0w_defconfig: { extends: .defconfig }
 raspberrypi2_defconfig: { extends: .defconfig }
diff --git a/DEVELOPERS b/DEVELOPERS
index 55fb022218..5cbf19fb1f 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -2047,11 +2047,13 @@ F:	board/friendlyarm/nanopi-m4/
 F:	board/friendlyarm/nanopi-neo4/
 F:	board/olimex/a33_olinuxino/
 F:	board/orangepi/orangepi-rk3399/
+F:	board/radxa/
 F:	configs/nanopc_t4_defconfig
 F:	configs/nanopi_m4_defconfig
 F:	configs/nanopi_neo4_defconfig
 F:	configs/olimex_a33_olinuxino_defconfig
 F:	configs/orangepi_rk3399_defconfig
+F:	configs/radxa_rock_pi4_defconfig
 
 N:	Simon Dawson <spdawson@gmail.com>
 F:	boot/at91bootstrap3/
diff --git a/board/radxa/rock-pi4/extlinux.conf b/board/radxa/rock-pi4/extlinux.conf
new file mode 100644
index 0000000000..f939cf5c56
--- /dev/null
+++ b/board/radxa/rock-pi4/extlinux.conf
@@ -0,0 +1,4 @@
+label Radxa Rock pi4 linux
+  kernel /boot/Image
+  devicetree /boot/rk3399-rock-pi-4.dtb
+  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk0p1 rootwait
diff --git a/board/radxa/rock-pi4/genimage.cfg b/board/radxa/rock-pi4/genimage.cfg
new file mode 100644
index 0000000000..b8c1cd5220
--- /dev/null
+++ b/board/radxa/rock-pi4/genimage.cfg
@@ -0,0 +1,22 @@
+image sdcard.img {
+	hdimage {
+	}
+
+	partition u-boot-tpl-spl-dtb {
+		in-partition-table = "no"
+		image = "u-boot-tpl-spl-dtb.img"
+		offset = 32K
+	}
+
+	partition u-boot-dtb {
+		in-partition-table = "no"
+		image = "u-boot.itb"
+		offset = 8M
+		size = 30M
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}
diff --git a/board/radxa/rock-pi4/post-build.sh b/board/radxa/rock-pi4/post-build.sh
new file mode 100755
index 0000000000..e852ba6adf
--- /dev/null
+++ b/board/radxa/rock-pi4/post-build.sh
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+MKIMAGE=$HOST_DIR/bin/mkimage
+BOARD_DIR="$(dirname $0)"
+
+$MKIMAGE -n rk3399 -T rksd -d $BINARIES_DIR/u-boot-tpl-dtb.bin $BINARIES_DIR/u-boot-tpl-dtb.img
+cat $BINARIES_DIR/u-boot-tpl-dtb.img $BINARIES_DIR/u-boot-spl-dtb.bin > $BINARIES_DIR/u-boot-tpl-spl-dtb.img
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
diff --git a/board/radxa/rock-pi4/readme.txt b/board/radxa/rock-pi4/readme.txt
new file mode 100644
index 0000000000..a6c8f10e3c
--- /dev/null
+++ b/board/radxa/rock-pi4/readme.txt
@@ -0,0 +1,51 @@
+Intro
+=====
+
+Radxa Rock Pi4 is a RK3399 SoC based ARM64 board.
+
+Wiki: https://wiki.radxa.com/Rockpi4
+
+Build
+=====
+
+Run Rock Pi 4 configuration
+
+  $ make radxa_rock_pi4_defconfig
+
+To build, run make comamnd.
+
+  $ make
+
+Files created in output directory
+=================================
+
+output/images
+
+├── bl31.bin
+├── bl31.elf
+├── Image
+├── rk3399-rock-pi-4.dtb
+├── rootfs.ext2
+├── rootfs.ext4 -> rootfs.ext2
+├── rootfs.tar
+├── sdcard.img
+├── u-boot.bin
+├── u-boot.itb
+├── u-boot-spl-dtb.bin
+├── u-boot-tpl-dtb.bin
+├── u-boot-tpl-dtb.img
+└── u-boot-tpl-spl-dtb.img
+
+Creating bootable SD card:
+=========================
+
+Simply invoke (as root)
+
+  # dd if=output/images/sdcard.img of=/dev/sdX && sync
+
+Where X is your SD card device
+
+Serial console
+--------------
+
+Baudrate for this board is 1500000
diff --git a/configs/radxa_rock_pi4_defconfig b/configs/radxa_rock_pi4_defconfig
new file mode 100644
index 0000000000..1bf7e17909
--- /dev/null
+++ b/configs/radxa_rock_pi4_defconfig
@@ -0,0 +1,55 @@
+# Architecture
+BR2_aarch64=y
+BR2_cortex_a72_a53=y
+
+# Linux headers same as kernel, a 5.1 series
+BR2_KERNEL_HEADERS_5_1=y
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/ARM-software/arm-trusted-firmware"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="v2.0"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/amarula/u-boot-amarula.git"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="dd2b180c457d35de195707dfa0b57a83b97fb275"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rock-pi-4-rk3399"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl-dtb.bin tpl/u-boot-tpl-dtb.bin"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.1"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-rock-pi-4"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+
+# Filesystem
+BR2_TARGET_GENERIC_HOSTNAME="Rock Pi4"
+BR2_TARGET_GENERIC_ISSUE="Welcome to Rock Pi4!"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="512M"
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/radxa/rock-pi4/genimage.cfg"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/radxa/rock-pi4/post-build.sh"
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 3/3] board/pine64: Add support for Pine64 RockPro64 board
  2019-06-04  8:47 [U-Boot] [PATCH 1/3] board/friendlyarm: Add support for friendlyarm nanopi neo4 board Shyam Saini
  2019-06-04  8:47 ` [U-Boot] [PATCH 2/3] board/radxa: Add support for Radxa Rock Pi4 board Shyam Saini
@ 2019-06-04  8:47 ` Shyam Saini
  2019-06-04  8:51   ` Shyam Saini
  2019-06-05 14:57 ` [U-Boot] [PATCH 1/3] board/friendlyarm: Add support for friendlyarm nanopi neo4 board Tom Rini
  2 siblings, 1 reply; 6+ messages in thread
From: Shyam Saini @ 2019-06-04  8:47 UTC (permalink / raw)
  To: u-boot

This initial support includes:
            Linux 5.1
            Custom U-Boot
            Arm Trusted Firmware v2.0
            Buildroot default packages

Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
---
 .gitlab-ci.yml                       |  1 +
 DEVELOPERS                           |  2 ++
 board/pine64/rockpro64/extlinux.conf |  4 +++
 board/pine64/rockpro64/genimage.cfg  | 22 +++++++++++++++
 board/pine64/rockpro64/post-build.sh |  9 ++++++
 board/pine64/rockpro64/readme.txt    | 51 +++++++++++++++++++++++++++++++++
 configs/pine64_rockpro64_defconfig   | 55 ++++++++++++++++++++++++++++++++++++
 7 files changed, 144 insertions(+)
 create mode 100644 board/pine64/rockpro64/extlinux.conf
 create mode 100644 board/pine64/rockpro64/genimage.cfg
 create mode 100755 board/pine64/rockpro64/post-build.sh
 create mode 100644 board/pine64/rockpro64/readme.txt
 create mode 100644 configs/pine64_rockpro64_defconfig

diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index e290d602ad..5c9e344f8c 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -215,6 +215,7 @@ pandaboard_defconfig: { extends: .defconfig }
 pc_x86_64_bios_defconfig: { extends: .defconfig }
 pc_x86_64_efi_defconfig: { extends: .defconfig }
 pine64_defconfig: { extends: .defconfig }
+pine64_rockpro64_defconfig: { extends: .defconfig }
 pine64_sopine_defconfig: { extends: .defconfig }
 qemu_aarch64_virt_defconfig: { extends: .defconfig }
 qemu_arm_versatile_defconfig: { extends: .defconfig }
diff --git a/DEVELOPERS b/DEVELOPERS
index 5cbf19fb1f..64b84a06a5 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -2047,12 +2047,14 @@ F:	board/friendlyarm/nanopi-m4/
 F:	board/friendlyarm/nanopi-neo4/
 F:	board/olimex/a33_olinuxino/
 F:	board/orangepi/orangepi-rk3399/
+F:	board/pine64/rockpro64
 F:	board/radxa/
 F:	configs/nanopc_t4_defconfig
 F:	configs/nanopi_m4_defconfig
 F:	configs/nanopi_neo4_defconfig
 F:	configs/olimex_a33_olinuxino_defconfig
 F:	configs/orangepi_rk3399_defconfig
+F:	configs/pine64_rockpro64_defconfig
 F:	configs/radxa_rock_pi4_defconfig
 
 N:	Simon Dawson <spdawson@gmail.com>
diff --git a/board/pine64/rockpro64/extlinux.conf b/board/pine64/rockpro64/extlinux.conf
new file mode 100644
index 0000000000..ff196499b0
--- /dev/null
+++ b/board/pine64/rockpro64/extlinux.conf
@@ -0,0 +1,4 @@
+label RockPro64 linux
+  kernel /boot/Image
+  devicetree /boot/rk3399-rockpro64.dtb
+  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk0p1 rootwait
diff --git a/board/pine64/rockpro64/genimage.cfg b/board/pine64/rockpro64/genimage.cfg
new file mode 100644
index 0000000000..b8c1cd5220
--- /dev/null
+++ b/board/pine64/rockpro64/genimage.cfg
@@ -0,0 +1,22 @@
+image sdcard.img {
+	hdimage {
+	}
+
+	partition u-boot-tpl-spl-dtb {
+		in-partition-table = "no"
+		image = "u-boot-tpl-spl-dtb.img"
+		offset = 32K
+	}
+
+	partition u-boot-dtb {
+		in-partition-table = "no"
+		image = "u-boot.itb"
+		offset = 8M
+		size = 30M
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}
diff --git a/board/pine64/rockpro64/post-build.sh b/board/pine64/rockpro64/post-build.sh
new file mode 100755
index 0000000000..e852ba6adf
--- /dev/null
+++ b/board/pine64/rockpro64/post-build.sh
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+MKIMAGE=$HOST_DIR/bin/mkimage
+BOARD_DIR="$(dirname $0)"
+
+$MKIMAGE -n rk3399 -T rksd -d $BINARIES_DIR/u-boot-tpl-dtb.bin $BINARIES_DIR/u-boot-tpl-dtb.img
+cat $BINARIES_DIR/u-boot-tpl-dtb.img $BINARIES_DIR/u-boot-spl-dtb.bin > $BINARIES_DIR/u-boot-tpl-spl-dtb.img
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
diff --git a/board/pine64/rockpro64/readme.txt b/board/pine64/rockpro64/readme.txt
new file mode 100644
index 0000000000..2fa8be362f
--- /dev/null
+++ b/board/pine64/rockpro64/readme.txt
@@ -0,0 +1,51 @@
+Intro
+=====
+
+Pine64 RockPro64 is a RK3399 SoC based ARM64 board.
+
+Wiki: https://wiki.pine64.org/index.php/ROCKPro64_Main_Page
+
+Build
+=====
+
+Run Pine64 RockPro64 configuration
+
+  $ make pine64_rockpro64_defconfig
+
+To build, run make comamnd.
+
+  $ make
+
+Files created in output directory
+=================================
+
+output/images
+
+├── bl31.bin
+├── bl31.elf
+├── Image
+├── rk3399-rockpro64.dtb
+├── rootfs.ext2
+├── rootfs.ext4 -> rootfs.ext2
+├── rootfs.tar
+├── sdcard.img
+├── u-boot.bin
+├── u-boot.itb
+├── u-boot-spl-dtb.bin
+├── u-boot-tpl-dtb.bin
+├── u-boot-tpl-dtb.img
+└── u-boot-tpl-spl-dtb.img
+
+Creating bootable SD card:
+=========================
+
+Simply invoke (as root)
+
+  # dd if=output/images/sdcard.img of=/dev/sdX && sync
+
+Where X is your SD card device
+
+Serial console
+--------------
+
+Baudrate for this board is 1500000
diff --git a/configs/pine64_rockpro64_defconfig b/configs/pine64_rockpro64_defconfig
new file mode 100644
index 0000000000..283d4331d5
--- /dev/null
+++ b/configs/pine64_rockpro64_defconfig
@@ -0,0 +1,55 @@
+# Architecture
+BR2_aarch64=y
+BR2_cortex_a72_a53=y
+
+# Linux headers same as kernel, a 5.1 series
+BR2_KERNEL_HEADERS_5_1=y
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/ARM-software/arm-trusted-firmware"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="v2.0"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/amarula/u-boot-amarula.git"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="dd2b180c457d35de195707dfa0b57a83b97fb275"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rockpro64-rk3399"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl-dtb.bin tpl/u-boot-tpl-dtb.bin"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.1"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-rockpro64"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+
+# Filesystem
+BR2_TARGET_GENERIC_HOSTNAME="RockPro 64"
+BR2_TARGET_GENERIC_ISSUE="Welcome to RockPro64!"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="512M"
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pine64/rockpro64/genimage.cfg"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/pine64/rockpro64/post-build.sh"
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 3/3] board/pine64: Add support for Pine64 RockPro64 board
  2019-06-04  8:47 ` [U-Boot] [PATCH 3/3] board/pine64: Add support for Pine64 RockPro64 board Shyam Saini
@ 2019-06-04  8:51   ` Shyam Saini
  0 siblings, 0 replies; 6+ messages in thread
From: Shyam Saini @ 2019-06-04  8:51 UTC (permalink / raw)
  To: u-boot

My sincere apologies, these patches were intended  for buildroot mailing list
My reverse search did some mistake.

On Tue, Jun 4, 2019 at 2:17 PM Shyam Saini
<shyam.saini@amarulasolutions.com> wrote:
>
> This initial support includes:
>             Linux 5.1
>             Custom U-Boot
>             Arm Trusted Firmware v2.0
>             Buildroot default packages
>
> Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
> ---
>  .gitlab-ci.yml                       |  1 +
>  DEVELOPERS                           |  2 ++
>  board/pine64/rockpro64/extlinux.conf |  4 +++
>  board/pine64/rockpro64/genimage.cfg  | 22 +++++++++++++++
>  board/pine64/rockpro64/post-build.sh |  9 ++++++
>  board/pine64/rockpro64/readme.txt    | 51 +++++++++++++++++++++++++++++++++
>  configs/pine64_rockpro64_defconfig   | 55 ++++++++++++++++++++++++++++++++++++
>  7 files changed, 144 insertions(+)
>  create mode 100644 board/pine64/rockpro64/extlinux.conf
>  create mode 100644 board/pine64/rockpro64/genimage.cfg
>  create mode 100755 board/pine64/rockpro64/post-build.sh
>  create mode 100644 board/pine64/rockpro64/readme.txt
>  create mode 100644 configs/pine64_rockpro64_defconfig
>
> diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
> index e290d602ad..5c9e344f8c 100644
> --- a/.gitlab-ci.yml
> +++ b/.gitlab-ci.yml
> @@ -215,6 +215,7 @@ pandaboard_defconfig: { extends: .defconfig }
>  pc_x86_64_bios_defconfig: { extends: .defconfig }
>  pc_x86_64_efi_defconfig: { extends: .defconfig }
>  pine64_defconfig: { extends: .defconfig }
> +pine64_rockpro64_defconfig: { extends: .defconfig }
>  pine64_sopine_defconfig: { extends: .defconfig }
>  qemu_aarch64_virt_defconfig: { extends: .defconfig }
>  qemu_arm_versatile_defconfig: { extends: .defconfig }
> diff --git a/DEVELOPERS b/DEVELOPERS
> index 5cbf19fb1f..64b84a06a5 100644
> --- a/DEVELOPERS
> +++ b/DEVELOPERS
> @@ -2047,12 +2047,14 @@ F:      board/friendlyarm/nanopi-m4/
>  F:     board/friendlyarm/nanopi-neo4/
>  F:     board/olimex/a33_olinuxino/
>  F:     board/orangepi/orangepi-rk3399/
> +F:     board/pine64/rockpro64
>  F:     board/radxa/
>  F:     configs/nanopc_t4_defconfig
>  F:     configs/nanopi_m4_defconfig
>  F:     configs/nanopi_neo4_defconfig
>  F:     configs/olimex_a33_olinuxino_defconfig
>  F:     configs/orangepi_rk3399_defconfig
> +F:     configs/pine64_rockpro64_defconfig
>  F:     configs/radxa_rock_pi4_defconfig
>
>  N:     Simon Dawson <spdawson@gmail.com>
> diff --git a/board/pine64/rockpro64/extlinux.conf b/board/pine64/rockpro64/extlinux.conf
> new file mode 100644
> index 0000000000..ff196499b0
> --- /dev/null
> +++ b/board/pine64/rockpro64/extlinux.conf
> @@ -0,0 +1,4 @@
> +label RockPro64 linux
> +  kernel /boot/Image
> +  devicetree /boot/rk3399-rockpro64.dtb
> +  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk0p1 rootwait
> diff --git a/board/pine64/rockpro64/genimage.cfg b/board/pine64/rockpro64/genimage.cfg
> new file mode 100644
> index 0000000000..b8c1cd5220
> --- /dev/null
> +++ b/board/pine64/rockpro64/genimage.cfg
> @@ -0,0 +1,22 @@
> +image sdcard.img {
> +       hdimage {
> +       }
> +
> +       partition u-boot-tpl-spl-dtb {
> +               in-partition-table = "no"
> +               image = "u-boot-tpl-spl-dtb.img"
> +               offset = 32K
> +       }
> +
> +       partition u-boot-dtb {
> +               in-partition-table = "no"
> +               image = "u-boot.itb"
> +               offset = 8M
> +               size = 30M
> +       }
> +
> +       partition rootfs {
> +               partition-type = 0x83
> +               image = "rootfs.ext4"
> +       }
> +}
> diff --git a/board/pine64/rockpro64/post-build.sh b/board/pine64/rockpro64/post-build.sh
> new file mode 100755
> index 0000000000..e852ba6adf
> --- /dev/null
> +++ b/board/pine64/rockpro64/post-build.sh
> @@ -0,0 +1,9 @@
> +#!/bin/sh
> +
> +MKIMAGE=$HOST_DIR/bin/mkimage
> +BOARD_DIR="$(dirname $0)"
> +
> +$MKIMAGE -n rk3399 -T rksd -d $BINARIES_DIR/u-boot-tpl-dtb.bin $BINARIES_DIR/u-boot-tpl-dtb.img
> +cat $BINARIES_DIR/u-boot-tpl-dtb.img $BINARIES_DIR/u-boot-spl-dtb.bin > $BINARIES_DIR/u-boot-tpl-spl-dtb.img
> +
> +install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
> diff --git a/board/pine64/rockpro64/readme.txt b/board/pine64/rockpro64/readme.txt
> new file mode 100644
> index 0000000000..2fa8be362f
> --- /dev/null
> +++ b/board/pine64/rockpro64/readme.txt
> @@ -0,0 +1,51 @@
> +Intro
> +=====
> +
> +Pine64 RockPro64 is a RK3399 SoC based ARM64 board.
> +
> +Wiki: https://wiki.pine64.org/index.php/ROCKPro64_Main_Page
> +
> +Build
> +=====
> +
> +Run Pine64 RockPro64 configuration
> +
> +  $ make pine64_rockpro64_defconfig
> +
> +To build, run make comamnd.
> +
> +  $ make
> +
> +Files created in output directory
> +=================================
> +
> +output/images
> +
> +├── bl31.bin
> +├── bl31.elf
> +├── Image
> +├── rk3399-rockpro64.dtb
> +├── rootfs.ext2
> +├── rootfs.ext4 -> rootfs.ext2
> +├── rootfs.tar
> +├── sdcard.img
> +├── u-boot.bin
> +├── u-boot.itb
> +├── u-boot-spl-dtb.bin
> +├── u-boot-tpl-dtb.bin
> +├── u-boot-tpl-dtb.img
> +└── u-boot-tpl-spl-dtb.img
> +
> +Creating bootable SD card:
> +=========================
> +
> +Simply invoke (as root)
> +
> +  # dd if=output/images/sdcard.img of=/dev/sdX && sync
> +
> +Where X is your SD card device
> +
> +Serial console
> +--------------
> +
> +Baudrate for this board is 1500000
> diff --git a/configs/pine64_rockpro64_defconfig b/configs/pine64_rockpro64_defconfig
> new file mode 100644
> index 0000000000..283d4331d5
> --- /dev/null
> +++ b/configs/pine64_rockpro64_defconfig
> @@ -0,0 +1,55 @@
> +# Architecture
> +BR2_aarch64=y
> +BR2_cortex_a72_a53=y
> +
> +# Linux headers same as kernel, a 5.1 series
> +BR2_KERNEL_HEADERS_5_1=y
> +
> +# Firmware
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/ARM-software/arm-trusted-firmware"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="v2.0"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
> +
> +# Bootloader
> +BR2_TARGET_UBOOT=y
> +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
> +BR2_TARGET_UBOOT_CUSTOM_GIT=y
> +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/amarula/u-boot-amarula.git"
> +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="dd2b180c457d35de195707dfa0b57a83b97fb275"
> +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rockpro64-rk3399"
> +BR2_TARGET_UBOOT_NEEDS_DTC=y
> +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
> +BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS=y
> +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
> +BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
> +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
> +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
> +BR2_TARGET_UBOOT_SPL=y
> +BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl-dtb.bin tpl/u-boot-tpl-dtb.bin"
> +
> +# Kernel
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.1"
> +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-rockpro64"
> +BR2_LINUX_KERNEL_INSTALL_TARGET=y
> +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
> +
> +# Filesystem
> +BR2_TARGET_GENERIC_HOSTNAME="RockPro 64"
> +BR2_TARGET_GENERIC_ISSUE="Welcome to RockPro64!"
> +BR2_TARGET_ROOTFS_EXT2=y
> +BR2_TARGET_ROOTFS_EXT2_4=y
> +BR2_TARGET_ROOTFS_EXT2_SIZE="512M"
> +BR2_PACKAGE_HOST_DOSFSTOOLS=y
> +BR2_PACKAGE_HOST_GENIMAGE=y
> +BR2_PACKAGE_HOST_MTOOLS=y
> +BR2_PACKAGE_HOST_UBOOT_TOOLS=y
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
> +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pine64/rockpro64/genimage.cfg"
> +BR2_ROOTFS_POST_BUILD_SCRIPT="board/pine64/rockpro64/post-build.sh"
> --
> 2.11.0
>

^ permalink raw reply	[flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 1/3] board/friendlyarm: Add support for friendlyarm nanopi neo4 board
  2019-06-04  8:47 [U-Boot] [PATCH 1/3] board/friendlyarm: Add support for friendlyarm nanopi neo4 board Shyam Saini
  2019-06-04  8:47 ` [U-Boot] [PATCH 2/3] board/radxa: Add support for Radxa Rock Pi4 board Shyam Saini
  2019-06-04  8:47 ` [U-Boot] [PATCH 3/3] board/pine64: Add support for Pine64 RockPro64 board Shyam Saini
@ 2019-06-05 14:57 ` Tom Rini
  2019-06-06  6:17   ` Shyam Saini
  2 siblings, 1 reply; 6+ messages in thread
From: Tom Rini @ 2019-06-05 14:57 UTC (permalink / raw)
  To: u-boot

On Tue, Jun 04, 2019 at 02:17:03PM +0530, Shyam Saini wrote:

> This initial support includes:
>         Linux v5.2-rc1
>         Custom U-Boot
>         Arm Trusted Firmware v2.0
>         Buildroot default packages
> 
> Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
> ---
>  .gitlab-ci.yml                              |  1 +
>  DEVELOPERS                                  |  2 ++
>  board/friendlyarm/nanopi-neo4/extlinux.conf |  4 +++
>  board/friendlyarm/nanopi-neo4/genimage.cfg  | 22 ++++++++++++
>  board/friendlyarm/nanopi-neo4/post-build.sh |  9 +++++
>  board/friendlyarm/nanopi-neo4/readme.txt    | 53 +++++++++++++++++++++++++++
>  configs/nanopi_neo4_defconfig               | 55 +++++++++++++++++++++++++++++
>  7 files changed, 146 insertions(+)
>  create mode 100644 board/friendlyarm/nanopi-neo4/extlinux.conf
>  create mode 100644 board/friendlyarm/nanopi-neo4/genimage.cfg
>  create mode 100755 board/friendlyarm/nanopi-neo4/post-build.sh
>  create mode 100644 board/friendlyarm/nanopi-neo4/readme.txt
>  create mode 100644 configs/nanopi_neo4_defconfig
> 
> diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
> index 5ed1b8f4d5..2f41bcf7c6 100644
> --- a/.gitlab-ci.yml
> +++ b/.gitlab-ci.yml
> @@ -181,6 +181,7 @@ nanopi_m1_defconfig: { extends: .defconfig }
>  nanopi_m1_plus_defconfig: { extends: .defconfig }
>  nanopi_m4_defconfig: { extends: .defconfig }
>  nanopi_neo_defconfig: { extends: .defconfig }
> +nanopi_neo4_defconfig: { extends: .defconfig }
>  nexbox_a95x_defconfig: { extends: .defconfig }
>  nitrogen6sx_defconfig: { extends: .defconfig }
>  nitrogen6x_defconfig: { extends: .defconfig }

We don't have gitlab-ci setup in mainline, so this won't apply as-is.  I
would however very much like to see what you have as I'd posted
elsewhere my gitlab-ci file that converts what we do in travis to
gitlab.  Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190605/2ea71be0/attachment.sig>

^ permalink raw reply	[flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 1/3] board/friendlyarm: Add support for friendlyarm nanopi neo4 board
  2019-06-05 14:57 ` [U-Boot] [PATCH 1/3] board/friendlyarm: Add support for friendlyarm nanopi neo4 board Tom Rini
@ 2019-06-06  6:17   ` Shyam Saini
  0 siblings, 0 replies; 6+ messages in thread
From: Shyam Saini @ 2019-06-06  6:17 UTC (permalink / raw)
  To: u-boot

Hi Tom,

> > This initial support includes:
> >         Linux v5.2-rc1
> >         Custom U-Boot
> >         Arm Trusted Firmware v2.0
> >         Buildroot default packages
> >
> > Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
> > ---
> >  .gitlab-ci.yml                              |  1 +
> >  DEVELOPERS                                  |  2 ++
> >  board/friendlyarm/nanopi-neo4/extlinux.conf |  4 +++
> >  board/friendlyarm/nanopi-neo4/genimage.cfg  | 22 ++++++++++++
> >  board/friendlyarm/nanopi-neo4/post-build.sh |  9 +++++
> >  board/friendlyarm/nanopi-neo4/readme.txt    | 53 +++++++++++++++++++++++++++
> >  configs/nanopi_neo4_defconfig               | 55 +++++++++++++++++++++++++++++
> >  7 files changed, 146 insertions(+)
> >  create mode 100644 board/friendlyarm/nanopi-neo4/extlinux.conf
> >  create mode 100644 board/friendlyarm/nanopi-neo4/genimage.cfg
> >  create mode 100755 board/friendlyarm/nanopi-neo4/post-build.sh
> >  create mode 100644 board/friendlyarm/nanopi-neo4/readme.txt
> >  create mode 100644 configs/nanopi_neo4_defconfig
> >
> > diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
> > index 5ed1b8f4d5..2f41bcf7c6 100644
> > --- a/.gitlab-ci.yml
> > +++ b/.gitlab-ci.yml
> > @@ -181,6 +181,7 @@ nanopi_m1_defconfig: { extends: .defconfig }
> >  nanopi_m1_plus_defconfig: { extends: .defconfig }
> >  nanopi_m4_defconfig: { extends: .defconfig }
> >  nanopi_neo_defconfig: { extends: .defconfig }
> > +nanopi_neo4_defconfig: { extends: .defconfig }
> >  nexbox_a95x_defconfig: { extends: .defconfig }
> >  nitrogen6sx_defconfig: { extends: .defconfig }
> >  nitrogen6x_defconfig: { extends: .defconfig }
>
> We don't have gitlab-ci setup in mainline, so this won't apply as-is.  I
> would however very much like to see what you have as I'd posted
> elsewhere my gitlab-ci file that converts what we do in travis to
> gitlab.  Thanks!

These are the buildroot patches which I accidentally sent to u-boot
mailing list.
Sorry for the confusion and noise.

Thanks!!

^ permalink raw reply	[flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-06-06  6:17 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-04  8:47 [U-Boot] [PATCH 1/3] board/friendlyarm: Add support for friendlyarm nanopi neo4 board Shyam Saini
2019-06-04  8:47 ` [U-Boot] [PATCH 2/3] board/radxa: Add support for Radxa Rock Pi4 board Shyam Saini
2019-06-04  8:47 ` [U-Boot] [PATCH 3/3] board/pine64: Add support for Pine64 RockPro64 board Shyam Saini
2019-06-04  8:51   ` Shyam Saini
2019-06-05 14:57 ` [U-Boot] [PATCH 1/3] board/friendlyarm: Add support for friendlyarm nanopi neo4 board Tom Rini
2019-06-06  6:17   ` Shyam Saini

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.