* wlan0 not present @ 2012-04-17 17:59 Dominik Feser 2012-04-17 19:19 ` Arend van Spriel 0 siblings, 1 reply; 48+ messages in thread From: Dominik Feser @ 2012-04-17 17:59 UTC (permalink / raw) To: linux-wireless Hi! Maybe someone can help me. I have compiled and installed compat-wireless-3.4-rc1-2 and it seems to load correctly. The thing I am missing is the wlan0 device. # lspci -kvm Device: 02:00.0 Class: Network controller Vendor: Intel Corporation Device: Centrino Advanced-N 6205 SVendor: Intel Corporation SDevice: Centrino Advanced-N 6205 AGN Rev: 34 Module: iwlwifi # dmesg | grep iwlwifi iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlwifi 0000:02:00.0: setting latency timer to 64 iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 iwlwifi 0000:02:00.0: pci_resource_base = f23e0000 iwlwifi 0000:02:00.0: HW Revision ID = 0x34 iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X iwlwifi 0000:02:00.0: edf81e1c iwlwifi 0000:02:00.0: c9933e1c iwlwifi 0000:02:00.0: c9933de8 iwlwifi 0000:02:00.0: PCI INT A disabled # lsmod | grep iwl iwlwifi 179689 0 mac80211 231218 1 iwlwifi compat_firmware_class 5816 1 iwlwifi cfg80211 161549 2 iwlwifi,mac80211 compat 28095 4 iwlwifi,mac80211,compat_firmware_class,cfg80211 led_class 2525 2 iwlwifi,compat # uname -a Linux xenserver 2.6.32.12-0.7.1 #6 SMP Mon Apr 16 19:31:06 EDT 2012 i686 i686 i386 GNU/Linux For some reason there is no wlan0 when I run ifconfig -a and when I try to get it up I get: # ifconfig wlan0 up wlan0: unbekannte Schnittstelle: Kein passendes Gerät gefunden In proc: # cat /proc/net/wireless Inter-| sta-| Quality | Discarded packets | Missed | WE face | tus | link level noise | nwid crypt frag retry misc | beacon | 22 Nothing... Maybe some thoughts? Cheers, Dominik ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-17 17:59 wlan0 not present Dominik Feser @ 2012-04-17 19:19 ` Arend van Spriel 2012-04-17 21:41 ` Dominik Feser 0 siblings, 1 reply; 48+ messages in thread From: Arend van Spriel @ 2012-04-17 19:19 UTC (permalink / raw) To: Dominik Feser; +Cc: linux-wireless, Wey-Yi Guy, Johannes Berg On 04/17/2012 07:59 PM, Dominik Feser wrote: > Hi! > Maybe someone can help me. I have compiled and installed compat-wireless-3.4-rc1-2 and it seems to load correctly. The thing I am missing is the wlan0 device. > > # lspci -kvm > Device: 02:00.0 > Class: Network controller > Vendor: Intel Corporation > Device: Centrino Advanced-N 6205 > SVendor: Intel Corporation > SDevice: Centrino Advanced-N 6205 AGN > Rev: 34 > Module: iwlwifi > > Nothing... > > Maybe some thoughts? > I am not too familiar with iwlwifi or compat-wireless, but it seems the driver did not start successfully. Did it work before trying compat-wireless? Can you provide full dmesg output instead of filter it with grep? Can you enable Driver-API tracing in mac80211? Gr. AvS ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-17 19:19 ` Arend van Spriel @ 2012-04-17 21:41 ` Dominik Feser 2012-04-18 0:37 ` Johannes Berg 0 siblings, 1 reply; 48+ messages in thread From: Dominik Feser @ 2012-04-17 21:41 UTC (permalink / raw) To: Arend van Spriel; +Cc: Dominik Feser, linux-wireless, Wey-Yi Guy, Johannes Berg Hi Arend, here is the full output of dmesg: # dmesg Reserving virtual address space above 0xff400000 Linux version 2.6.32.12-0.7.1 (geeko@buildhost) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #6 SMP Mon Apr 16 19:31:06 EDT 2012 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU Xen-provided machine memory map: BIOS: 0000000000000000 - 000000000009a800 (usable) BIOS: 000000000009a800 - 00000000000a0000 (reserved) BIOS: 00000000000e0000 - 0000000000100000 (reserved) BIOS: 0000000000100000 - 0000000020000000 (usable) BIOS: 0000000020000000 - 0000000020200000 (reserved) BIOS: 0000000020200000 - 0000000040000000 (usable) BIOS: 0000000040000000 - 0000000040200000 (reserved) BIOS: 0000000040200000 - 00000000caa25000 (usable) BIOS: 00000000caa25000 - 00000000caa69000 (reserved) BIOS: 00000000caa69000 - 00000000cadb7000 (usable) BIOS: 00000000cadb7000 - 00000000cade7000 (reserved) BIOS: 00000000cade7000 - 00000000cafe7000 (ACPI NVS) BIOS: 00000000cafe7000 - 00000000cafff000 (ACPI data) BIOS: 00000000cafff000 - 00000000cb000000 (usable) BIOS: 00000000cb800000 - 00000000cfa00000 (reserved) BIOS: 00000000fec00000 - 00000000fec01000 (reserved) BIOS: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS: 00000000fee00000 - 00000000fee01000 (reserved) BIOS: 00000000ffc00000 - 00000000ffc20000 (reserved) BIOS: 0000000100000000 - 000000022e000000 (usable) Xen-provided physical RAM map: Xen: 0000000000000000 - 000000002f800000 (usable) DMI 2.6 present. last_pfn = 0x2f800 max_arch_pfn = 0x10000000 initial memory mapped : 0 - 00000000 init_memory_mapping: 0000000000000000-000000002f800000 NX (Execute Disable) protection: active 0000000000 - 002f800000 page 4k kernel direct mapping tables up to 2f800000 @ e4e000-fcf000 RAMDISK: 005f9000 - 00d80e00 ACPI: RSDP 000fe300 00024 (v02 DELL ) ACPI: XSDT caffde18 0007C (v01 DELL CBX3 06222004 MSFT 00010013) ACPI: FACP caf87d98 000F4 (v04 DELL CBX3 06222004 MSFT 00010013) ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20090903/tbfadt-369) ACPI Warning: 32/64X FACS address mismatch in FADT - CAFE4E40/00000000CAFE4D40, using 32 (20090903/tbfadt-486) ACPI: DSDT caf55018 087F6 (v02 INT430 SYSFexxx 00001001 INTL 20090903) ACPI: FACS cafe4e40 00040 ACPI: APIC caffcf18 000CC (v02 DELL CBX3 06222004 MSFT 00010013) ACPI: TCPA cafe5d18 00032 (v02 00000000 00000000) ACPI: SSDT caf88a98 002F9 (v01 DELLTP TPM 00003000 INTL 20090903) ACPI: MCFG cafe5c98 0003C (v01 DELL SNDYBRDG 06222004 MSFT 00000097) ACPI: HPET cafe5c18 00038 (v01 A M I PCHHPET 06222004 AMI. 00000003) ACPI: BOOT cafe5b98 00028 (v01 DELL CBX3 06222004 AMI 00010013) ACPI: SSDT caf6c018 00888 (v01 PmRef Cpu0Ist 00003000 INTL 20090903) ACPI: SSDT caf6b018 00996 (v01 PmRef CpuPm 00003000 INTL 20090903) ACPI: XMAR caf87c18 000E8 (v01 INTEL SNB 00000001 INTL 00000001) ACPI: SLIC caf75c18 00176 (v03 DELL CBX3 06222004 MSFT 00010013) 0MB HIGHMEM available. 760MB LOWMEM available. mapped low ram: 0 - 2f800000 low ram: 0 - 2f800000 node 0 low ram: 00000000 - 2f000000 node 0 bootmap 00000000 - 00005e00 (5 early reservations) ==> bootmem [0000000000 - 002f000000] #0 [0000100000 - 00005d8284] TEXT DATA BSS ==> [0000100000 - 00005d8284] #1 [00005f9000 - 0000e4e000] Xen provided ==> [00005f9000 - 0000e4e000] #2 [00005d9000 - 00005d91b3] BRK ==> [00005d9000 - 00005d91b3] #3 [0000e4e000 - 0000fc4000] PGTABLE ==> [0000e4e000 - 0000fc4000] #4 [0000000000 - 0000006000] BOOTMAP ==> [0000000000 - 0000006000] found SMP MP-table at [ff3eca70] 000f1a70 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x0002f800 HighMem 0x0002f800 -> 0x0002f800 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0002f000 0: 0x0002f800 -> 0x0002f800 On node 0 totalpages: 192512 free_area_init_node: node 0, pgdat c04ef300, node_mem_map c1002000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1488 pages used for memmap Normal zone: 186928 pages, LIFO batch:31 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at cfa00000 (gap: cfa00000:2f200000) NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 9 pages/cpu @c16b9000 s13720 r0 d23144 u65536 pcpu-alloc: s13720 r0 d23144 u65536 alloc=16*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Swapping MFNs for PFN 544 and 16bb (MFN c9544 and c9f33) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 190992 Kernel command line: root=LABEL=root-hwkkxaxy ro xencons=hvc console=hvc0 console=tty0 quiet vga=785 splash PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Software IO TLB enabled: Aperture: 64 megabytes Address size: 28 bits Kernel range: c17b2000 - c57b2000 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Initializing HighMem for node 0 (00000000:00000000) Memory: 681820k/778240k available (2591k kernel code, 88012k reserved, 1466k data, 316k init, 0k highmem) virtual kernel memory layout: fixmap : 0xff077000 - 0xff3ff000 (3616 kB) pkmap : 0xfec00000 - 0xfee00000 (2048 kB) vmalloc : 0xf0000000 - 0xfebfe000 ( 235 MB) lowmem : 0xc0000000 - 0xef800000 ( 760 MB) .init : 0xc04f7000 - 0xc0546000 ( 316 kB) .data : 0xc0387d67 - 0xc04f66f8 (1466 kB) .text : 0xc0100000 - 0xc0387d67 (2591 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Hierarchical RCU implementation. NR_IRQS:2048 Extended CMOS year: 2000 Xen reported: 2793.714 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled console [hvc0] enabled Calibrating delay using timer specific routine.. 5616.63 BogoMIPS (lpj=28083158) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 512 mce: CPU supports 7 MCE banks Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20090903 SMP alternatives: switching to SMP code Initializing CPU#1 Initializing CPU#2 Brought up 4 CPUs Initializing CPU#3 Grant table version 2 NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: MCFG area at f8000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG for extended config space ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930 ACPI: No dock devices found. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug _OSC invalid UUID ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 64bit mmio: [0xe1400000-0xe17fffff] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:00:02.0: reg 20 io port: [0x4000-0x403f] pci 0000:00:16.0: reg 10 64bit mmio: [0xe2eb0000-0xe2eb000f] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold pci 0000:00:16.0: PME# disabled pci 0000:00:16.3: reg 10 io port: [0x40e0-0x40e7] pci 0000:00:16.3: reg 14 32bit mmio: [0xe2e90000-0xe2e90fff] pci 0000:00:19.0: reg 10 32bit mmio: [0xe2e00000-0xe2e1ffff] pci 0000:00:19.0: reg 14 32bit mmio: [0xe2e80000-0xe2e80fff] pci 0000:00:19.0: reg 18 io port: [0x4080-0x409f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 10 32bit mmio: [0xe2e70000-0xe2e703ff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xe2e60000-0xe2e63fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 10 32bit mmio: [0xe2e50000-0xe2e503ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: PME# disabled pci 0000:00:1f.2: reg 10 io port: [0x40d0-0x40d7] pci 0000:00:1f.2: reg 14 io port: [0x40c0-0x40c3] pci 0000:00:1f.2: reg 18 io port: [0x40b0-0x40b7] pci 0000:00:1f.2: reg 1c io port: [0x40a0-0x40a3] pci 0000:00:1f.2: reg 20 io port: [0x4060-0x407f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xe2e40000-0xe2e407ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 64bit mmio: [0xe2e30000-0xe2e300ff] pci 0000:00:1f.3: reg 20 io port: [0x4040-0x405f] pci 0000:00:1c.0: PCI bridge to [bus 01-01] pci 0000:02:00.0: reg 10 64bit mmio: [0xe2d00000-0xe2d01fff] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.1: PCI bridge to [bus 02-02] pci 0000:00:1c.1: bridge 32bit mmio: [0xe2d00000-0xe2dfffff] pci 0000:00:1c.2: PCI bridge to [bus 03-08] pci 0000:00:1c.2: bridge io port: [0x3000-0x3fff] pci 0000:00:1c.2: bridge 32bit mmio: [0xe2200000-0xe2bfffff] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xe0a00000-0xe13fffff] pci 0000:00:1c.3: PCI bridge to [bus 09-09] pci 0000:00:1c.3: bridge io port: [0x2000-0x2fff] pci 0000:00:1c.3: bridge 32bit mmio: [0xe1800000-0xe21fffff] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xe0000000-0xe09fffff] pci 0000:0a:00.0: reg 10 32bit mmio: [0xe2c20000-0xe2c201ff] pci 0000:0a:00.0: supports D1 D2 pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:0a:00.0: PME# disabled pci 0000:0a:00.1: reg 10 32bit mmio: [0xe2c10000-0xe2c10fff] pci 0000:0a:00.1: reg 18 32bit mmio: [0xe2c00000-0xe2c007ff] pci 0000:0a:00.1: supports D1 D2 pci 0000:0a:00.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:0a:00.1: PME# disabled pci 0000:00:1c.5: PCI bridge to [bus 0a-0a] pci 0000:00:1c.5: bridge 32bit mmio: [0xe2c00000-0xe2cfffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] _OSC invalid UUID ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. xen_mem: Initialising balloon driver. vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded PCI: Using ACPI for IRQ routing Switching to clocksource xen pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved system 00:05: ioport range 0x680-0x69f has been reserved system 00:05: ioport range 0x1000-0x100f has been reserved system 00:05: ioport range 0xffff-0xffff has been reserved system 00:05: ioport range 0xffff-0xffff has been reserved system 00:05: ioport range 0x400-0x47f has been reserved system 00:05: ioport range 0x500-0x57f has been reserved system 00:05: ioport range 0x164e-0x164f has been reserved system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:0a: iomem range 0xfed10000-0xfed17fff has been reserved system 00:0a: iomem range 0xfed18000-0xfed18fff has been reserved system 00:0a: iomem range 0xfed19000-0xfed19fff has been reserved system 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:0a: iomem range 0xfed90000-0xfed93fff has been reserved system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved system 00:0a: iomem range 0xff000000-0xffffffff could not be reserved system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved system 00:0c: iomem range 0x20000000-0x201fffff has been reserved system 00:0c: iomem range 0x40000000-0x401fffff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: 0xe2d00000-0xe2dfffff pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.2: IO window: 0x3000-0x3fff pci 0000:00:1c.2: MEM window: 0xe2200000-0xe2bfffff pci 0000:00:1c.2: PREFETCH window: 0x000000e0a00000-0x000000e13fffff pci 0000:00:1c.3: PCI bridge, secondary bus 0000:09 pci 0000:00:1c.3: IO window: 0x2000-0x2fff pci 0000:00:1c.3: MEM window: 0xe1800000-0xe21fffff pci 0000:00:1c.3: PREFETCH window: 0x000000e0000000-0x000000e09fffff pci 0000:00:1c.5: PCI bridge, secondary bus 0000:0a pci 0000:00:1c.5: IO window: disabled pci 0000:00:1c.5: MEM window: 0xe2c00000-0xe2cfffff pci 0000:00:1c.5: PREFETCH window: disabled pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.5: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:02: resource 1 mem: [0xe2d00000-0xe2dfffff] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] pci_bus 0000:03: resource 1 mem: [0xe2200000-0xe2bfffff] pci_bus 0000:03: resource 2 pref mem [0xe0a00000-0xe13fffff] pci_bus 0000:09: resource 0 io: [0x2000-0x2fff] pci_bus 0000:09: resource 1 mem: [0xe1800000-0xe21fffff] pci_bus 0000:09: resource 2 pref mem [0xe0000000-0xe09fffff] pci_bus 0000:0a: resource 1 mem: [0xe2c00000-0xe2cfffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device Trying to unpack rootfs image as initramfs... Freeing initrd memory: 7711k freed Simple Boot Flag at 0xf3 set to 0x1 MCE: bind virq for DOM0 logging MCE_DOM0_LOG: enter dom0 mce vIRQ handler MCE_DOM0_LOG: No more urgent data MCE_DOM0_LOG: No more nonurgent data VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 379 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) vesafb: framebuffer at 0xd0000000, mapped to 0xf0080000, using 1200k, total 65472k vesafb: mode is 640x480x16, linelength=1280, pages=0 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 fb0: VESA VGA frame buffer device floppy0: Unable to grab DMA2 for the floppy driver floppy0: no floppy controllers found brd: module loaded loop: module loaded Xen virtual console successfully installed as hvc0 Event-channel device installed. blktap_device_init: blktap device major 253 blktap_ring_init: blktap ring major: 253 netfront: Initialising virtual ethernet driver. Uniform Multi-Platform E-IDE driver PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Warning: Keylock active. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice NET: Registered protocol family 17 registered taskstats version 1 input: AT Translated Set 2 keyboard as /class/input/input0 PCI IO multiplexer device installed. BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 316k freed Console: switching to colour frame buffer device 80x30 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ehci_hcd 0000:00:1a.0: setting latency timer to 64 ehci_hcd 0000:00:1a.0: EHCI Host Controller ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.0: debug port 2 ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe2e70000 ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:1d.0: setting latency timer to 64 ehci_hcd 0000:00:1d.0: EHCI Host Controller ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.0: debug port 2 ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported ehci_hcd 0000:00:1d.0: irq 17, io mem 0xe2e50000 ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver SCSI subsystem initialized libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ahci 0000:00:1f.2: irq 1279 (279) for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40100 irq 1279 ata2: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40180 irq 1279 ata3: DUMMY ata4: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40280 irq 1279 ata5: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40300 irq 1279 ata6: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40380 irq 1279 input: PS/2 Generic Mouse as /class/input/input1 usb 1-1: new high speed USB device using ehci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 6 ports detected ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) usb 2-1: new high speed USB device using ehci_hcd and address 2 ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) ata1.00: ATA-8: ST9500423AS, 0002DEM1, max UDMA/133 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST9500423AS 0002 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: [sda] 4096-byte physical blocks sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 8 ports detected usb 1-1.4: new full speed USB device using ehci_hcd and address 3 usb 1-1.4: configuration #1 chosen from 1 choice usb 1-1.5: new high speed USB device using ehci_hcd and address 4 usb 1-1.5: configuration #1 chosen from 1 choice ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU60N, A102, max UDMA/133, ATAPI AN ata2.00: configured for UDMA/133 scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GU60N A102 PQ: 0 ANSI: 5 usb 2-1.8: new full speed USB device using ehci_hcd and address 3 usb 2-1.8: configuration #0 chosen from 1 choice usb 2-1.8: config 0 descriptor?? ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 15 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. input: PC Speaker as /class/input/input2 i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ACPI: I/O resource 0000:00:1f.3 [0x4040-0x405f] conflicts with ACPI region SMBI [0x4040-0x404f] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver parport_pc 00:08: activated parport_pc 00:08: reported by Plug and Play ACPI parport_pc 00:08: disabled rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 242 bytes nvram Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-NAPI e1000e: Copyright(c) 1999 - 2010 Intel Corporation. e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X input: Lid Switch as /class/input/input3 ACPI: Lid Switch [LID] input: Power Button as /class/input/input4 ACPI: Power Button [PBTN] input: Sleep Button as /class/input/input5 ACPI: Sleep Button [SBTN] input: Power Button as /class/input/input6 ACPI: Power Button [PWRF] ACPI: SSDT cadd7798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903) ACPI: SSDT cadd8a98 00303 (v01 PmRef ApIst 00003000 INTL 20090903) ACPI: SSDT cadd6d98 00119 (v01 PmRef ApCst 00003000 INTL 20090903) e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) d4:be:d9:0f:d0:6c e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:00:19.0: eth0: MAC: 11, PHY: 11, PBA No: 3041FF-0FF serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 0000:00:16.3: ttyS0 at I/O 0x40e0 (irq = 17) is a 16550A sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 Compat-wireless backport release: compat-wireless-v3.4-rc1-2 Backport based on linux-stable.git v3.4-rc1 cfg80211: Calling CRDA to update world regulatory domain thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM] (25 C) Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: Copyright(c) 2003-2012 Intel Corporation iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlwifi 0000:02:00.0: setting latency timer to 64 iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 iwlwifi 0000:02:00.0: pci_resource_base = f23e0000 iwlwifi 0000:02:00.0: HW Revision ID = 0x34 iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X ACPI: Battery Slot [BAT0] (battery present) ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT1] (battery absent) ACPI: Battery Slot [BAT2] (battery absent) sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 acpi device:37: registered as cooling_device8 input: Video Bus as /class/input/input7 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) Non-volatile memory driver v1.3 lp: driver loaded but no devices found md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. EXT3 FS on sda1, internal journal ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A Adding 524280k swap on /var/swap/swap.001. Priority:-1 extents:137 across:637248k Microcode Update Driver: v2.00-xen <tigran@aivazian.fsnet.co.uk>, Peter Oruba Microcode Update Driver: v2.00-xen removed. ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (12157 buckets, 48628 max) e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> device xenbr0 entered promiscuous mode device eth0 entered promiscuous mode RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO warning: `ntpdate' uses 32-bit capabilities (legacy support in use) suspend: event channel 38 kjournald starting. Commit interval 15 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. iwlwifi 0000:02:00.0: edf81e1c iwlwifi 0000:02:00.0: c9933e1c iwlwifi 0000:02:00.0: c9933de8 iwlwifi 0000:02:00.0: PCI INT A disabled It did not work before because I had to rebuild the kernel with wireless support and compile compat-wireless for it. This seemed to me as the only way to get the Centrino Advanced-N 6205 to work. Am I wrong? May it be that I am missing the firmware? I tried to copy a ucode file to /lib/firmware but the behavior did not change. Overlooking the dmesg output no module is complaining about missing firmware files... Regarding the driver api tracing, is there an easy way to get trace-cmd? I am not familiar with git... Thank you!! Cheers, Dominik Am 17.04.2012 um 21:19 schrieb Arend van Spriel: > On 04/17/2012 07:59 PM, Dominik Feser wrote: >> Hi! >> Maybe someone can help me. I have compiled and installed compat-wireless-3.4-rc1-2 and it seems to load correctly. The thing I am missing is the wlan0 device. >> >> # lspci -kvm >> Device: 02:00.0 >> Class: Network controller >> Vendor: Intel Corporation >> Device: Centrino Advanced-N 6205 >> SVendor: Intel Corporation >> SDevice: Centrino Advanced-N 6205 AGN >> Rev: 34 >> Module: iwlwifi >> >> Nothing... >> >> Maybe some thoughts? >> > > I am not too familiar with iwlwifi or compat-wireless, but it seems the driver did not start successfully. Did it work before trying compat-wireless? Can you provide full dmesg output instead of filter it with grep? Can you enable Driver-API tracing in mac80211? > > Gr. AvS > ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-17 21:41 ` Dominik Feser @ 2012-04-18 0:37 ` Johannes Berg 2012-04-18 6:49 ` Dominik Feser 0 siblings, 1 reply; 48+ messages in thread From: Johannes Berg @ 2012-04-18 0:37 UTC (permalink / raw) To: Dominik Feser; +Cc: Arend van Spriel, linux-wireless, Wey-Yi Guy > iwlwifi 0000:02:00.0: edf81e1c > iwlwifi 0000:02:00.0: c9933e1c > iwlwifi 0000:02:00.0: c9933de8 > iwlwifi 0000:02:00.0: PCI INT A disabled These messages are odd, must be some %pV thing not working correctly. > It did not work before because I had to rebuild the kernel with wireless support and compile compat-wireless for it. This seemed to me as the only way to get the Centrino Advanced-N 6205 to work. > Am I wrong? May it be that I am missing the firmware? I tried to copy a ucode file to /lib/firmware but the behavior did not change. Overlooking the dmesg output no module is complaining about missing firmware files... I think those messages would in fact be complaining about missing firmware if they'd get printed correctly. johannes ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-18 0:37 ` Johannes Berg @ 2012-04-18 6:49 ` Dominik Feser 2012-04-18 8:36 ` Emmanuel Grumbach 0 siblings, 1 reply; 48+ messages in thread From: Dominik Feser @ 2012-04-18 6:49 UTC (permalink / raw) To: Johannes Berg; +Cc: Dominik Feser, Arend van Spriel, linux-wireless, Wey-Yi Guy Hello Johannes, Can you be a bit more specific about your thoughts? What do you think is not working correctly? Am I understanding you correctly? You think I have a firmware problem? Dominik Am 18.04.2012 um 02:37 schrieb Johannes Berg: >> iwlwifi 0000:02:00.0: edf81e1c >> iwlwifi 0000:02:00.0: c9933e1c >> iwlwifi 0000:02:00.0: c9933de8 >> iwlwifi 0000:02:00.0: PCI INT A disabled > > These messages are odd, must be some %pV thing not working correctly. > >> It did not work before because I had to rebuild the kernel with wireless support and compile compat-wireless for it. This seemed to me as the only way to get the Centrino Advanced-N 6205 to work. >> Am I wrong? May it be that I am missing the firmware? I tried to copy a ucode file to /lib/firmware but the behavior did not change. Overlooking the dmesg output no module is complaining about missing firmware files... > > I think those messages would in fact be complaining about missing firmware if they'd get printed correctly. > > johannes ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-18 6:49 ` Dominik Feser @ 2012-04-18 8:36 ` Emmanuel Grumbach 2012-04-18 8:48 ` Dominik Feser 0 siblings, 1 reply; 48+ messages in thread From: Emmanuel Grumbach @ 2012-04-18 8:36 UTC (permalink / raw) To: Dominik Feser; +Cc: Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy On Wed, Apr 18, 2012 at 09:49, Dominik Feser <dominik.feser@googlemail.com> wrote: > > Hello Johannes, > > Can you be a bit more specific about your thoughts? What do you think is not working correctly? > Am I understanding you correctly? You think I have a firmware problem? > Johannes says that you may be missing the fw file: please send the output of: lspci -s 02:00 -n and then I will tell you what fw you need ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-18 8:36 ` Emmanuel Grumbach @ 2012-04-18 8:48 ` Dominik Feser 2012-04-18 9:30 ` Emmanuel Grumbach 0 siblings, 1 reply; 48+ messages in thread From: Dominik Feser @ 2012-04-18 8:48 UTC (permalink / raw) To: Emmanuel Grumbach Cc: Dominik Feser, Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy Hi Emmanuel, here is the output: # lspci -s 02:00 -n 02:00.0 0280: 8086:0082 (rev 34) THX, Dominik Am 18.04.2012 um 10:36 schrieb Emmanuel Grumbach: > On Wed, Apr 18, 2012 at 09:49, Dominik Feser > <dominik.feser@googlemail.com> wrote: >> >> Hello Johannes, >> >> Can you be a bit more specific about your thoughts? What do you think is not working correctly? >> Am I understanding you correctly? You think I have a firmware problem? >> > > Johannes says that you may be missing the fw file: > > please send the output of: > lspci -s 02:00 -n > > and then I will tell you what fw you need ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-18 8:48 ` Dominik Feser @ 2012-04-18 9:30 ` Emmanuel Grumbach 2012-04-18 14:39 ` Dominik Feser 0 siblings, 1 reply; 48+ messages in thread From: Emmanuel Grumbach @ 2012-04-18 9:30 UTC (permalink / raw) To: Dominik Feser; +Cc: Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy On Wed, Apr 18, 2012 at 11:48, Dominik Feser <dominik.feser@googlemail.com> wrote: > Hi Emmanuel, > > here is the output: > # lspci -s 02:00 -n > 02:00.0 0280: 8086:0082 (rev 34) > > THX, > Dominik > Ouch I also need the subdeviceid: sudo lspci -x -s 02:00 ? ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-18 9:30 ` Emmanuel Grumbach @ 2012-04-18 14:39 ` Dominik Feser 2012-04-18 16:37 ` Emmanuel Grumbach 0 siblings, 1 reply; 48+ messages in thread From: Dominik Feser @ 2012-04-18 14:39 UTC (permalink / raw) To: Emmanuel Grumbach Cc: Dominik Feser, Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy There it is: # lspci -x -s 02:00 02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34) 00: 86 80 82 00 02 00 10 00 34 00 80 02 10 00 00 00 10: 04 00 d0 e2 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 21 13 30: 00 00 00 00 c8 00 00 00 00 00 00 00 0a 01 00 00 Am 18.04.2012 um 11:30 schrieb Emmanuel Grumbach: > On Wed, Apr 18, 2012 at 11:48, Dominik Feser > <dominik.feser@googlemail.com> wrote: >> Hi Emmanuel, >> >> here is the output: >> # lspci -s 02:00 -n >> 02:00.0 0280: 8086:0082 (rev 34) >> >> THX, >> Dominik >> > > Ouch I also need the subdeviceid: > > sudo lspci -x -s 02:00 ? ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-18 14:39 ` Dominik Feser @ 2012-04-18 16:37 ` Emmanuel Grumbach 2012-04-18 16:56 ` Dominik Feser 0 siblings, 1 reply; 48+ messages in thread From: Emmanuel Grumbach @ 2012-04-18 16:37 UTC (permalink / raw) To: Dominik Feser; +Cc: Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy On Wed, Apr 18, 2012 at 17:39, Dominik Feser <dominik.feser@googlemail.com> wrote: > There it is: > > # lspci -x -s 02:00 > 02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34) > 00: 86 80 82 00 02 00 10 00 34 00 80 02 10 00 00 00 > 10: 04 00 d0 e2 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 21 13 > 30: 00 00 00 00 c8 00 00 00 00 00 00 00 0a 01 00 00 > Ok, you need a fw whose name is iwlwifi-6000g2a-* can you send the output of ls /lib/firmware iwlwifi-6000g2a-* thanks ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-18 16:37 ` Emmanuel Grumbach @ 2012-04-18 16:56 ` Dominik Feser 2012-04-18 19:25 ` Emmanuel Grumbach 0 siblings, 1 reply; 48+ messages in thread From: Dominik Feser @ 2012-04-18 16:56 UTC (permalink / raw) To: Emmanuel Grumbach Cc: Dominik Feser, Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy OK, that was the firmware I had tried before. I deleted it because it did not work, too. Here is the output you wanted: # ls /lib/firmware/iwlwifi-6000* /lib/firmware/iwlwifi-6000g2a-5.ucode After copying the firmware there again and rebooting dmesg looks like this: # dmesg | grep iwl iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlwifi 0000:02:00.0: setting latency timer to 64 iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 iwlwifi 0000:02:00.0: pci_resource_base = f2478000 iwlwifi 0000:02:00.0: HW Revision ID = 0x34 iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X iwlwifi 0000:02:00.0: ea4b7e1c Still no wlan0 for me... Full dmesg: # dmesg Reserving virtual address space above 0xff400000 Linux version 2.6.32.12-0.7.1 (geeko@buildhost) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #6 SMP Mon Apr 16 19:31:06 EDT 2012 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU Xen-provided machine memory map: BIOS: 0000000000000000 - 000000000009a800 (usable) BIOS: 000000000009a800 - 00000000000a0000 (reserved) BIOS: 00000000000e0000 - 0000000000100000 (reserved) BIOS: 0000000000100000 - 0000000020000000 (usable) BIOS: 0000000020000000 - 0000000020200000 (reserved) BIOS: 0000000020200000 - 0000000040000000 (usable) BIOS: 0000000040000000 - 0000000040200000 (reserved) BIOS: 0000000040200000 - 00000000caa25000 (usable) BIOS: 00000000caa25000 - 00000000caa69000 (reserved) BIOS: 00000000caa69000 - 00000000cadb7000 (usable) BIOS: 00000000cadb7000 - 00000000cade7000 (reserved) BIOS: 00000000cade7000 - 00000000cafe7000 (ACPI NVS) BIOS: 00000000cafe7000 - 00000000cafff000 (ACPI data) BIOS: 00000000cafff000 - 00000000cb000000 (usable) BIOS: 00000000cb800000 - 00000000cfa00000 (reserved) BIOS: 00000000fec00000 - 00000000fec01000 (reserved) BIOS: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS: 00000000fee00000 - 00000000fee01000 (reserved) BIOS: 00000000ffc00000 - 00000000ffc20000 (reserved) BIOS: 0000000100000000 - 000000022e000000 (usable) Xen-provided physical RAM map: Xen: 0000000000000000 - 000000002f800000 (usable) DMI 2.6 present. last_pfn = 0x2f800 max_arch_pfn = 0x10000000 initial memory mapped : 0 - 00000000 init_memory_mapping: 0000000000000000-000000002f800000 NX (Execute Disable) protection: active 0000000000 - 002f800000 page 4k kernel direct mapping tables up to 2f800000 @ e4e000-fcf000 RAMDISK: 005f9000 - 00d80e00 ACPI: RSDP 000fe300 00024 (v02 DELL ) ACPI: XSDT caffde18 0007C (v01 DELL CBX3 06222004 MSFT 00010013) ACPI: FACP caf87d98 000F4 (v04 DELL CBX3 06222004 MSFT 00010013) ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20090903/tbfadt-369) ACPI Warning: 32/64X FACS address mismatch in FADT - CAFE4E40/00000000CAFE4D40, using 32 (20090903/tbfadt-486) ACPI: DSDT caf55018 087F6 (v02 INT430 SYSFexxx 00001001 INTL 20090903) ACPI: FACS cafe4e40 00040 ACPI: APIC caffcf18 000CC (v02 DELL CBX3 06222004 MSFT 00010013) ACPI: TCPA cafe5d18 00032 (v02 00000000 00000000) ACPI: SSDT caf88a98 002F9 (v01 DELLTP TPM 00003000 INTL 20090903) ACPI: MCFG cafe5c98 0003C (v01 DELL SNDYBRDG 06222004 MSFT 00000097) ACPI: HPET cafe5c18 00038 (v01 A M I PCHHPET 06222004 AMI. 00000003) ACPI: BOOT cafe5b98 00028 (v01 DELL CBX3 06222004 AMI 00010013) ACPI: SSDT caf6c018 00888 (v01 PmRef Cpu0Ist 00003000 INTL 20090903) ACPI: SSDT caf6b018 00996 (v01 PmRef CpuPm 00003000 INTL 20090903) ACPI: XMAR caf87c18 000E8 (v01 INTEL SNB 00000001 INTL 00000001) ACPI: SLIC caf75c18 00176 (v03 DELL CBX3 06222004 MSFT 00010013) 0MB HIGHMEM available. 760MB LOWMEM available. mapped low ram: 0 - 2f800000 low ram: 0 - 2f800000 node 0 low ram: 00000000 - 2f000000 node 0 bootmap 00000000 - 00005e00 (5 early reservations) ==> bootmem [0000000000 - 002f000000] #0 [0000100000 - 00005d8284] TEXT DATA BSS ==> [0000100000 - 00005d8284] #1 [00005f9000 - 0000e4e000] Xen provided ==> [00005f9000 - 0000e4e000] #2 [00005d9000 - 00005d91b3] BRK ==> [00005d9000 - 00005d91b3] #3 [0000e4e000 - 0000fc4000] PGTABLE ==> [0000e4e000 - 0000fc4000] #4 [0000000000 - 0000006000] BOOTMAP ==> [0000000000 - 0000006000] found SMP MP-table at [ff3eca70] 000f1a70 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x0002f800 HighMem 0x0002f800 -> 0x0002f800 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0002f000 0: 0x0002f800 -> 0x0002f800 On node 0 totalpages: 192512 free_area_init_node: node 0, pgdat c04ef300, node_mem_map c1002000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1488 pages used for memmap Normal zone: 186928 pages, LIFO batch:31 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at cfa00000 (gap: cfa00000:2f200000) NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 9 pages/cpu @c16b9000 s13720 r0 d23144 u65536 pcpu-alloc: s13720 r0 d23144 u65536 alloc=16*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Swapping MFNs for PFN 544 and 16bb (MFN c9544 and c9f33) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 190992 Kernel command line: root=LABEL=root-hwkkxaxy ro xencons=hvc console=hvc0 console=tty0 quiet vga=785 splash PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Software IO TLB enabled: Aperture: 64 megabytes Address size: 28 bits Kernel range: c17b2000 - c57b2000 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Initializing HighMem for node 0 (00000000:00000000) Memory: 681820k/778240k available (2591k kernel code, 88012k reserved, 1466k data, 316k init, 0k highmem) virtual kernel memory layout: fixmap : 0xff077000 - 0xff3ff000 (3616 kB) pkmap : 0xfec00000 - 0xfee00000 (2048 kB) vmalloc : 0xf0000000 - 0xfebfe000 ( 235 MB) lowmem : 0xc0000000 - 0xef800000 ( 760 MB) .init : 0xc04f7000 - 0xc0546000 ( 316 kB) .data : 0xc0387d67 - 0xc04f66f8 (1466 kB) .text : 0xc0100000 - 0xc0387d67 (2591 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Hierarchical RCU implementation. NR_IRQS:2048 Extended CMOS year: 2000 Xen reported: 2793.780 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled console [hvc0] enabled Calibrating delay using timer specific routine.. 5616.72 BogoMIPS (lpj=28083614) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 512 mce: CPU supports 7 MCE banks Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20090903 SMP alternatives: switching to SMP code Initializing CPU#1 Initializing CPU#2 Brought up 4 CPUs Initializing CPU#3 Grant table version 2 NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: MCFG area at f8000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG for extended config space ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930 ACPI: No dock devices found. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug _OSC invalid UUID ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 64bit mmio: [0xe1400000-0xe17fffff] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:00:02.0: reg 20 io port: [0x4000-0x403f] pci 0000:00:16.0: reg 10 64bit mmio: [0xe2eb0000-0xe2eb000f] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold pci 0000:00:16.0: PME# disabled pci 0000:00:16.3: reg 10 io port: [0x40e0-0x40e7] pci 0000:00:16.3: reg 14 32bit mmio: [0xe2e90000-0xe2e90fff] pci 0000:00:19.0: reg 10 32bit mmio: [0xe2e00000-0xe2e1ffff] pci 0000:00:19.0: reg 14 32bit mmio: [0xe2e80000-0xe2e80fff] pci 0000:00:19.0: reg 18 io port: [0x4080-0x409f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 10 32bit mmio: [0xe2e70000-0xe2e703ff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xe2e60000-0xe2e63fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 10 32bit mmio: [0xe2e50000-0xe2e503ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: PME# disabled pci 0000:00:1f.2: reg 10 io port: [0x40d0-0x40d7] pci 0000:00:1f.2: reg 14 io port: [0x40c0-0x40c3] pci 0000:00:1f.2: reg 18 io port: [0x40b0-0x40b7] pci 0000:00:1f.2: reg 1c io port: [0x40a0-0x40a3] pci 0000:00:1f.2: reg 20 io port: [0x4060-0x407f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xe2e40000-0xe2e407ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 64bit mmio: [0xe2e30000-0xe2e300ff] pci 0000:00:1f.3: reg 20 io port: [0x4040-0x405f] pci 0000:00:1c.0: PCI bridge to [bus 01-01] pci 0000:02:00.0: reg 10 64bit mmio: [0xe2d00000-0xe2d01fff] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.1: PCI bridge to [bus 02-02] pci 0000:00:1c.1: bridge 32bit mmio: [0xe2d00000-0xe2dfffff] pci 0000:00:1c.2: PCI bridge to [bus 03-08] pci 0000:00:1c.2: bridge io port: [0x3000-0x3fff] pci 0000:00:1c.2: bridge 32bit mmio: [0xe2200000-0xe2bfffff] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xe0a00000-0xe13fffff] pci 0000:00:1c.3: PCI bridge to [bus 09-09] pci 0000:00:1c.3: bridge io port: [0x2000-0x2fff] pci 0000:00:1c.3: bridge 32bit mmio: [0xe1800000-0xe21fffff] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xe0000000-0xe09fffff] pci 0000:0a:00.0: reg 10 32bit mmio: [0xe2c20000-0xe2c201ff] pci 0000:0a:00.0: supports D1 D2 pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:0a:00.0: PME# disabled pci 0000:0a:00.1: reg 10 32bit mmio: [0xe2c10000-0xe2c10fff] pci 0000:0a:00.1: reg 18 32bit mmio: [0xe2c00000-0xe2c007ff] pci 0000:0a:00.1: supports D1 D2 pci 0000:0a:00.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:0a:00.1: PME# disabled pci 0000:00:1c.5: PCI bridge to [bus 0a-0a] pci 0000:00:1c.5: bridge 32bit mmio: [0xe2c00000-0xe2cfffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] _OSC invalid UUID ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. xen_mem: Initialising balloon driver. vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded PCI: Using ACPI for IRQ routing Switching to clocksource xen pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved system 00:05: ioport range 0x680-0x69f has been reserved system 00:05: ioport range 0x1000-0x100f has been reserved system 00:05: ioport range 0xffff-0xffff has been reserved system 00:05: ioport range 0xffff-0xffff has been reserved system 00:05: ioport range 0x400-0x47f has been reserved system 00:05: ioport range 0x500-0x57f has been reserved system 00:05: ioport range 0x164e-0x164f has been reserved system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:0a: iomem range 0xfed10000-0xfed17fff has been reserved system 00:0a: iomem range 0xfed18000-0xfed18fff has been reserved system 00:0a: iomem range 0xfed19000-0xfed19fff has been reserved system 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:0a: iomem range 0xfed90000-0xfed93fff has been reserved system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved system 00:0a: iomem range 0xff000000-0xffffffff could not be reserved system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved system 00:0c: iomem range 0x20000000-0x201fffff has been reserved system 00:0c: iomem range 0x40000000-0x401fffff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: 0xe2d00000-0xe2dfffff pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.2: IO window: 0x3000-0x3fff pci 0000:00:1c.2: MEM window: 0xe2200000-0xe2bfffff pci 0000:00:1c.2: PREFETCH window: 0x000000e0a00000-0x000000e13fffff pci 0000:00:1c.3: PCI bridge, secondary bus 0000:09 pci 0000:00:1c.3: IO window: 0x2000-0x2fff pci 0000:00:1c.3: MEM window: 0xe1800000-0xe21fffff pci 0000:00:1c.3: PREFETCH window: 0x000000e0000000-0x000000e09fffff pci 0000:00:1c.5: PCI bridge, secondary bus 0000:0a pci 0000:00:1c.5: IO window: disabled pci 0000:00:1c.5: MEM window: 0xe2c00000-0xe2cfffff pci 0000:00:1c.5: PREFETCH window: disabled pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.5: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:02: resource 1 mem: [0xe2d00000-0xe2dfffff] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] pci_bus 0000:03: resource 1 mem: [0xe2200000-0xe2bfffff] pci_bus 0000:03: resource 2 pref mem [0xe0a00000-0xe13fffff] pci_bus 0000:09: resource 0 io: [0x2000-0x2fff] pci_bus 0000:09: resource 1 mem: [0xe1800000-0xe21fffff] pci_bus 0000:09: resource 2 pref mem [0xe0000000-0xe09fffff] pci_bus 0000:0a: resource 1 mem: [0xe2c00000-0xe2cfffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device Trying to unpack rootfs image as initramfs... Freeing initrd memory: 7711k freed Simple Boot Flag at 0xf3 set to 0x1 MCE: bind virq for DOM0 logging MCE_DOM0_LOG: enter dom0 mce vIRQ handler MCE_DOM0_LOG: No more urgent data MCE_DOM0_LOG: No more nonurgent data VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 379 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) vesafb: framebuffer at 0xd0000000, mapped to 0xf0080000, using 1200k, total 65472k vesafb: mode is 640x480x16, linelength=1280, pages=0 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 fb0: VESA VGA frame buffer device floppy0: Unable to grab DMA2 for the floppy driver floppy0: no floppy controllers found brd: module loaded loop: module loaded Xen virtual console successfully installed as hvc0 Event-channel device installed. blktap_device_init: blktap device major 253 blktap_ring_init: blktap ring major: 253 netfront: Initialising virtual ethernet driver. Uniform Multi-Platform E-IDE driver PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Warning: Keylock active. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice NET: Registered protocol family 17 registered taskstats version 1 input: AT Translated Set 2 keyboard as /class/input/input0 PCI IO multiplexer device installed. BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 316k freed Console: switching to colour frame buffer device 80x30 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ehci_hcd 0000:00:1a.0: setting latency timer to 64 ehci_hcd 0000:00:1a.0: EHCI Host Controller ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.0: debug port 2 ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe2e70000 ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:1d.0: setting latency timer to 64 ehci_hcd 0000:00:1d.0: EHCI Host Controller ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.0: debug port 2 ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported ehci_hcd 0000:00:1d.0: irq 17, io mem 0xe2e50000 ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver SCSI subsystem initialized libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ahci 0000:00:1f.2: irq 1279 (279) for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40100 irq 1279 ata2: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40180 irq 1279 ata3: DUMMY ata4: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40280 irq 1279 ata5: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40300 irq 1279 ata6: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40380 irq 1279 input: PS/2 Generic Mouse as /class/input/input1 usb 1-1: new high speed USB device using ehci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 6 ports detected ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) usb 2-1: new high speed USB device using ehci_hcd and address 2 ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) ata1.00: ATA-8: ST9500423AS, 0002DEM1, max UDMA/133 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST9500423AS 0002 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: [sda] 4096-byte physical blocks sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 8 ports detected usb 1-1.4: new full speed USB device using ehci_hcd and address 3 usb 1-1.4: configuration #1 chosen from 1 choice usb 1-1.5: new high speed USB device using ehci_hcd and address 4 usb 1-1.5: configuration #1 chosen from 1 choice ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU60N, A102, max UDMA/133, ATAPI AN ata2.00: configured for UDMA/133 scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GU60N A102 PQ: 0 ANSI: 5 usb 2-1.8: new full speed USB device using ehci_hcd and address 3 usb 2-1.8: configuration #0 chosen from 1 choice usb 2-1.8: config 0 descriptor?? ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com kjournald starting. Commit interval 15 seconds EXT3-fs: mounted filesystem with ordered data mode. input: PC Speaker as /class/input/input2 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 0000:00:16.3: ttyS0 at I/O 0x40e0 (irq = 17) is a 16550A e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-NAPI e1000e: Copyright(c) 1999 - 2010 Intel Corporation. e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 242 bytes nvram parport_pc 00:08: activated parport_pc 00:08: reported by Plug and Play ACPI parport_pc 00:08: disabled e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) d4:be:d9:0f:d0:6c e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:00:19.0: eth0: MAC: 11, PHY: 11, PBA No: 3041FF-0FF i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ACPI: I/O resource 0000:00:1f.3 [0x4040-0x405f] conflicts with ACPI region SMBI [0x4040-0x404f] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver ACPI: SSDT cadd7798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903) ACPI: SSDT cadd8a98 00303 (v01 PmRef ApIst 00003000 INTL 20090903) ACPI: SSDT cadd6d98 00119 (v01 PmRef ApCst 00003000 INTL 20090903) input: Lid Switch as /class/input/input3 ACPI: Lid Switch [LID] input: Power Button as /class/input/input4 ACPI: Power Button [PBTN] input: Sleep Button as /class/input/input5 ACPI: Sleep Button [SBTN] input: Power Button as /class/input/input6 ACPI: Power Button [PWRF] thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM] (25 C) sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 Compat-wireless backport release: compat-wireless-v3.4-rc1-2 Backport based on linux-stable.git v3.4-rc1 cfg80211: Calling CRDA to update world regulatory domain ACPI: AC Adapter [AC] (on-line) sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 ACPI: Battery Slot [BAT0] (battery present) ACPI: Battery Slot [BAT1] (battery absent) ACPI: Battery Slot [BAT2] (battery absent) Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: Copyright(c) 2003-2012 Intel Corporation iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlwifi 0000:02:00.0: setting latency timer to 64 iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 iwlwifi 0000:02:00.0: pci_resource_base = f2478000 iwlwifi 0000:02:00.0: HW Revision ID = 0x34 iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X acpi device:37: registered as cooling_device8 input: Video Bus as /class/input/input7 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) Non-volatile memory driver v1.3 lp: driver loaded but no devices found md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. EXT3 FS on sda1, internal journal ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A Adding 524280k swap on /var/swap/swap.001. Priority:-1 extents:137 across:637248k Microcode Update Driver: v2.00-xen <tigran@aivazian.fsnet.co.uk>, Peter Oruba Microcode Update Driver: v2.00-xen removed. ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (12157 buckets, 48628 max) e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> device xenbr0 entered promiscuous mode device eth0 entered promiscuous mode e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. warning: `ntpdate' uses 32-bit capabilities (legacy support in use) suspend: event channel 38 kjournald starting. Commit interval 15 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. iwlwifi 0000:02:00.0: ea4b7e1c iwlwifi 0000:02:00.0: ca253e1c iwlwifi 0000:02:00.0: ca253de8 iwlwifi 0000:02:00.0: PCI INT A disabled Am 18.04.2012 um 18:37 schrieb Emmanuel Grumbach: > On Wed, Apr 18, 2012 at 17:39, Dominik Feser > <dominik.feser@googlemail.com> wrote: >> There it is: >> >> # lspci -x -s 02:00 >> 02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34) >> 00: 86 80 82 00 02 00 10 00 34 00 80 02 10 00 00 00 >> 10: 04 00 d0 e2 00 00 00 00 00 00 00 00 00 00 00 00 >> 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 21 13 >> 30: 00 00 00 00 c8 00 00 00 00 00 00 00 0a 01 00 00 >> > > Ok, you need a fw whose name is iwlwifi-6000g2a-* > > can you send the output of > > ls /lib/firmware iwlwifi-6000g2a-* > > > thanks ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-18 16:56 ` Dominik Feser @ 2012-04-18 19:25 ` Emmanuel Grumbach 2012-04-18 19:28 ` Dominik Feser 0 siblings, 1 reply; 48+ messages in thread From: Emmanuel Grumbach @ 2012-04-18 19:25 UTC (permalink / raw) To: Dominik Feser; +Cc: Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy On Wed, Apr 18, 2012 at 19:56, Dominik Feser <dominik.feser@googlemail.com> wrote: > OK, that was the firmware I had tried before. I deleted it because it did not work, too. > > Here is the output you wanted: > # ls /lib/firmware/iwlwifi-6000* > /lib/firmware/iwlwifi-6000g2a-5.ucode > > After copying the firmware there again and rebooting dmesg looks like this: > # dmesg | grep iwl > iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > iwlwifi 0000:02:00.0: setting latency timer to 64 > iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 > iwlwifi 0000:02:00.0: pci_resource_base = f2478000 > iwlwifi 0000:02:00.0: HW Revision ID = 0x34 > iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X > iwlwifi 0000:02:00.0: ea4b7e1c > > Still no wlan0 for me... > > Full dmesg: > # dmesg > Reserving virtual address space above 0xff400000 > Linux version 2.6.32.12-0.7.1 (geeko@buildhost) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #6 SMP Mon Apr 16 19:31:06 EDT 2012 > KERNEL supported cpus: > Intel GenuineIntel > AMD AuthenticAMD > NSC Geode by NSC > Cyrix CyrixInstead > Centaur CentaurHauls > Transmeta GenuineTMx86 > Transmeta TransmetaCPU > Xen-provided machine memory map: > BIOS: 0000000000000000 - 000000000009a800 (usable) > BIOS: 000000000009a800 - 00000000000a0000 (reserved) > BIOS: 00000000000e0000 - 0000000000100000 (reserved) > BIOS: 0000000000100000 - 0000000020000000 (usable) > BIOS: 0000000020000000 - 0000000020200000 (reserved) > BIOS: 0000000020200000 - 0000000040000000 (usable) > BIOS: 0000000040000000 - 0000000040200000 (reserved) > BIOS: 0000000040200000 - 00000000caa25000 (usable) > BIOS: 00000000caa25000 - 00000000caa69000 (reserved) > BIOS: 00000000caa69000 - 00000000cadb7000 (usable) > BIOS: 00000000cadb7000 - 00000000cade7000 (reserved) > BIOS: 00000000cade7000 - 00000000cafe7000 (ACPI NVS) > BIOS: 00000000cafe7000 - 00000000cafff000 (ACPI data) > BIOS: 00000000cafff000 - 00000000cb000000 (usable) > BIOS: 00000000cb800000 - 00000000cfa00000 (reserved) > BIOS: 00000000fec00000 - 00000000fec01000 (reserved) > BIOS: 00000000fed1c000 - 00000000fed20000 (reserved) > BIOS: 00000000fee00000 - 00000000fee01000 (reserved) > BIOS: 00000000ffc00000 - 00000000ffc20000 (reserved) > BIOS: 0000000100000000 - 000000022e000000 (usable) > Xen-provided physical RAM map: > Xen: 0000000000000000 - 000000002f800000 (usable) > DMI 2.6 present. > last_pfn = 0x2f800 max_arch_pfn = 0x10000000 > initial memory mapped : 0 - 00000000 > init_memory_mapping: 0000000000000000-000000002f800000 > NX (Execute Disable) protection: active > 0000000000 - 002f800000 page 4k > kernel direct mapping tables up to 2f800000 @ e4e000-fcf000 > RAMDISK: 005f9000 - 00d80e00 > ACPI: RSDP 000fe300 00024 (v02 DELL ) > ACPI: XSDT caffde18 0007C (v01 DELL CBX3 06222004 MSFT 00010013) > ACPI: FACP caf87d98 000F4 (v04 DELL CBX3 06222004 MSFT 00010013) > ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20090903/tbfadt-369) > ACPI Warning: 32/64X FACS address mismatch in FADT - CAFE4E40/00000000CAFE4D40, using 32 (20090903/tbfadt-486) > ACPI: DSDT caf55018 087F6 (v02 INT430 SYSFexxx 00001001 INTL 20090903) > ACPI: FACS cafe4e40 00040 > ACPI: APIC caffcf18 000CC (v02 DELL CBX3 06222004 MSFT 00010013) > ACPI: TCPA cafe5d18 00032 (v02 00000000 00000000) > ACPI: SSDT caf88a98 002F9 (v01 DELLTP TPM 00003000 INTL 20090903) > ACPI: MCFG cafe5c98 0003C (v01 DELL SNDYBRDG 06222004 MSFT 00000097) > ACPI: HPET cafe5c18 00038 (v01 A M I PCHHPET 06222004 AMI. 00000003) > ACPI: BOOT cafe5b98 00028 (v01 DELL CBX3 06222004 AMI 00010013) > ACPI: SSDT caf6c018 00888 (v01 PmRef Cpu0Ist 00003000 INTL 20090903) > ACPI: SSDT caf6b018 00996 (v01 PmRef CpuPm 00003000 INTL 20090903) > ACPI: XMAR caf87c18 000E8 (v01 INTEL SNB 00000001 INTL 00000001) > ACPI: SLIC caf75c18 00176 (v03 DELL CBX3 06222004 MSFT 00010013) > 0MB HIGHMEM available. > 760MB LOWMEM available. > mapped low ram: 0 - 2f800000 > low ram: 0 - 2f800000 > node 0 low ram: 00000000 - 2f000000 > node 0 bootmap 00000000 - 00005e00 > (5 early reservations) ==> bootmem [0000000000 - 002f000000] > #0 [0000100000 - 00005d8284] TEXT DATA BSS ==> [0000100000 - 00005d8284] > #1 [00005f9000 - 0000e4e000] Xen provided ==> [00005f9000 - 0000e4e000] > #2 [00005d9000 - 00005d91b3] BRK ==> [00005d9000 - 00005d91b3] > #3 [0000e4e000 - 0000fc4000] PGTABLE ==> [0000e4e000 - 0000fc4000] > #4 [0000000000 - 0000006000] BOOTMAP ==> [0000000000 - 0000006000] > found SMP MP-table at [ff3eca70] 000f1a70 > Zone PFN ranges: > DMA 0x00000000 -> 0x00001000 > Normal 0x00001000 -> 0x0002f800 > HighMem 0x0002f800 -> 0x0002f800 > Movable zone start PFN for each node > early_node_map[2] active PFN ranges > 0: 0x00000000 -> 0x0002f000 > 0: 0x0002f800 -> 0x0002f800 > On node 0 totalpages: 192512 > free_area_init_node: node 0, pgdat c04ef300, node_mem_map c1002000 > DMA zone: 32 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 4064 pages, LIFO batch:0 > Normal zone: 1488 pages used for memmap > Normal zone: 186928 pages, LIFO batch:31 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled) > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled) > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled) > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled) > ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled) > ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled) > ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled) > ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled) > ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled) > ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled) > ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled) > ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled) > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at cfa00000 (gap: cfa00000:2f200000) > NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 > PERCPU: Embedded 9 pages/cpu @c16b9000 s13720 r0 d23144 u65536 > pcpu-alloc: s13720 r0 d23144 u65536 alloc=16*4096 > pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 > Swapping MFNs for PFN 544 and 16bb (MFN c9544 and c9f33) > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 190992 > Kernel command line: root=LABEL=root-hwkkxaxy ro xencons=hvc console=hvc0 console=tty0 quiet vga=785 splash > PID hash table entries: 4096 (order: 2, 16384 bytes) > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > Software IO TLB enabled: > Aperture: 64 megabytes > Address size: 28 bits > Kernel range: c17b2000 - c57b2000 > PCI-DMA: Using software bounce buffering for IO (SWIOTLB) > Initializing HighMem for node 0 (00000000:00000000) > Memory: 681820k/778240k available (2591k kernel code, 88012k reserved, 1466k data, 316k init, 0k highmem) > virtual kernel memory layout: > fixmap : 0xff077000 - 0xff3ff000 (3616 kB) > pkmap : 0xfec00000 - 0xfee00000 (2048 kB) > vmalloc : 0xf0000000 - 0xfebfe000 ( 235 MB) > lowmem : 0xc0000000 - 0xef800000 ( 760 MB) > .init : 0xc04f7000 - 0xc0546000 ( 316 kB) > .data : 0xc0387d67 - 0xc04f66f8 (1466 kB) > .text : 0xc0100000 - 0xc0387d67 (2591 kB) > Checking if this processor honours the WP bit even in supervisor mode...Ok. > Hierarchical RCU implementation. > NR_IRQS:2048 > Extended CMOS year: 2000 > Xen reported: 2793.780 MHz processor. > Console: colour dummy device 80x25 > console [tty0] enabled > console [hvc0] enabled > Calibrating delay using timer specific routine.. 5616.72 BogoMIPS (lpj=28083614) > pid_max: default: 32768 minimum: 301 > Security Framework initialized > Mount-cache hash table entries: 512 > mce: CPU supports 7 MCE banks > Checking 'hlt' instruction... OK. > SMP alternatives: switching to UP code > ACPI: Core revision 20090903 > SMP alternatives: switching to SMP code > Initializing CPU#1 > Initializing CPU#2 > Brought up 4 CPUs > Initializing CPU#3 > Grant table version 2 > NET: Registered protocol family 16 > ACPI FADT declares the system doesn't support PCIe ASPM, so disable it > ACPI: bus type pci registered > PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 > PCI: Not using MMCONFIG. > PCI: Using configuration type 1 for base access > bio: create slab <bio-0> at 0 > ACPI: EC: Look up EC in DSDT > ACPI: BIOS _OSI(Linux) query ignored > ACPI: BIOS _OSI(Linux) query ignored > ACPI: Interpreter enabled > ACPI: (supports S0 S5) > ACPI: Using IOAPIC for interrupt routing > PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 > PCI: MCFG area at f8000000 reserved in ACPI motherboard resources > PCI: Using MMCONFIG for extended config space > ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930 > ACPI: No dock devices found. > PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug > _OSC invalid UUID > ACPI: PCI Root Bridge [PCI0] (0000:00) > pci 0000:00:02.0: reg 10 64bit mmio: [0xe1400000-0xe17fffff] > pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff] > pci 0000:00:02.0: reg 20 io port: [0x4000-0x403f] > pci 0000:00:16.0: reg 10 64bit mmio: [0xe2eb0000-0xe2eb000f] > pci 0000:00:16.0: PME# supported from D0 D3hot D3cold > pci 0000:00:16.0: PME# disabled > pci 0000:00:16.3: reg 10 io port: [0x40e0-0x40e7] > pci 0000:00:16.3: reg 14 32bit mmio: [0xe2e90000-0xe2e90fff] > pci 0000:00:19.0: reg 10 32bit mmio: [0xe2e00000-0xe2e1ffff] > pci 0000:00:19.0: reg 14 32bit mmio: [0xe2e80000-0xe2e80fff] > pci 0000:00:19.0: reg 18 io port: [0x4080-0x409f] > pci 0000:00:19.0: PME# supported from D0 D3hot D3cold > pci 0000:00:19.0: PME# disabled > pci 0000:00:1a.0: reg 10 32bit mmio: [0xe2e70000-0xe2e703ff] > pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1a.0: PME# disabled > pci 0000:00:1b.0: reg 10 64bit mmio: [0xe2e60000-0xe2e63fff] > pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1b.0: PME# disabled > pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.0: PME# disabled > pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.1: PME# disabled > pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.2: PME# disabled > pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.3: PME# disabled > pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.5: PME# disabled > pci 0000:00:1d.0: reg 10 32bit mmio: [0xe2e50000-0xe2e503ff] > pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1d.0: PME# disabled > pci 0000:00:1f.2: reg 10 io port: [0x40d0-0x40d7] > pci 0000:00:1f.2: reg 14 io port: [0x40c0-0x40c3] > pci 0000:00:1f.2: reg 18 io port: [0x40b0-0x40b7] > pci 0000:00:1f.2: reg 1c io port: [0x40a0-0x40a3] > pci 0000:00:1f.2: reg 20 io port: [0x4060-0x407f] > pci 0000:00:1f.2: reg 24 32bit mmio: [0xe2e40000-0xe2e407ff] > pci 0000:00:1f.2: PME# supported from D3hot > pci 0000:00:1f.2: PME# disabled > pci 0000:00:1f.3: reg 10 64bit mmio: [0xe2e30000-0xe2e300ff] > pci 0000:00:1f.3: reg 20 io port: [0x4040-0x405f] > pci 0000:00:1c.0: PCI bridge to [bus 01-01] > pci 0000:02:00.0: reg 10 64bit mmio: [0xe2d00000-0xe2d01fff] > pci 0000:02:00.0: PME# supported from D0 D3hot D3cold > pci 0000:02:00.0: PME# disabled > pci 0000:00:1c.1: PCI bridge to [bus 02-02] > pci 0000:00:1c.1: bridge 32bit mmio: [0xe2d00000-0xe2dfffff] > pci 0000:00:1c.2: PCI bridge to [bus 03-08] > pci 0000:00:1c.2: bridge io port: [0x3000-0x3fff] > pci 0000:00:1c.2: bridge 32bit mmio: [0xe2200000-0xe2bfffff] > pci 0000:00:1c.2: bridge 64bit mmio pref: [0xe0a00000-0xe13fffff] > pci 0000:00:1c.3: PCI bridge to [bus 09-09] > pci 0000:00:1c.3: bridge io port: [0x2000-0x2fff] > pci 0000:00:1c.3: bridge 32bit mmio: [0xe1800000-0xe21fffff] > pci 0000:00:1c.3: bridge 64bit mmio pref: [0xe0000000-0xe09fffff] > pci 0000:0a:00.0: reg 10 32bit mmio: [0xe2c20000-0xe2c201ff] > pci 0000:0a:00.0: supports D1 D2 > pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:0a:00.0: PME# disabled > pci 0000:0a:00.1: reg 10 32bit mmio: [0xe2c10000-0xe2c10fff] > pci 0000:0a:00.1: reg 18 32bit mmio: [0xe2c00000-0xe2c007ff] > pci 0000:0a:00.1: supports D1 D2 > pci 0000:0a:00.1: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:0a:00.1: PME# disabled > pci 0000:00:1c.5: PCI bridge to [bus 0a-0a] > pci 0000:00:1c.5: bridge 32bit mmio: [0xe2c00000-0xe2cfffff] > pci_bus 0000:00: on NUMA node 0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] > _OSC invalid UUID > ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 > ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 > ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 > ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 > ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15) > ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15) > ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. > xen_mem: Initialising balloon driver. > vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none > vgaarb: loaded > PCI: Using ACPI for IRQ routing > Switching to clocksource xen > pnp: PnP ACPI init > ACPI: bus type pnp registered > pnp: PnP ACPI: found 13 devices > ACPI: ACPI bus type pnp unregistered > system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved > system 00:05: ioport range 0x680-0x69f has been reserved > system 00:05: ioport range 0x1000-0x100f has been reserved > system 00:05: ioport range 0xffff-0xffff has been reserved > system 00:05: ioport range 0xffff-0xffff has been reserved > system 00:05: ioport range 0x400-0x47f has been reserved > system 00:05: ioport range 0x500-0x57f has been reserved > system 00:05: ioport range 0x164e-0x164f has been reserved > system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved > system 00:0a: iomem range 0xfed10000-0xfed17fff has been reserved > system 00:0a: iomem range 0xfed18000-0xfed18fff has been reserved > system 00:0a: iomem range 0xfed19000-0xfed19fff has been reserved > system 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved > system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved > system 00:0a: iomem range 0xfed90000-0xfed93fff has been reserved > system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved > system 00:0a: iomem range 0xff000000-0xffffffff could not be reserved > system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved > system 00:0c: iomem range 0x20000000-0x201fffff has been reserved > system 00:0c: iomem range 0x40000000-0x401fffff has been reserved > pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 > pci 0000:00:1c.0: IO window: disabled > pci 0000:00:1c.0: MEM window: disabled > pci 0000:00:1c.0: PREFETCH window: disabled > pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 > pci 0000:00:1c.1: IO window: disabled > pci 0000:00:1c.1: MEM window: 0xe2d00000-0xe2dfffff > pci 0000:00:1c.1: PREFETCH window: disabled > pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 > pci 0000:00:1c.2: IO window: 0x3000-0x3fff > pci 0000:00:1c.2: MEM window: 0xe2200000-0xe2bfffff > pci 0000:00:1c.2: PREFETCH window: 0x000000e0a00000-0x000000e13fffff > pci 0000:00:1c.3: PCI bridge, secondary bus 0000:09 > pci 0000:00:1c.3: IO window: 0x2000-0x2fff > pci 0000:00:1c.3: MEM window: 0xe1800000-0xe21fffff > pci 0000:00:1c.3: PREFETCH window: 0x000000e0000000-0x000000e09fffff > pci 0000:00:1c.5: PCI bridge, secondary bus 0000:0a > pci 0000:00:1c.5: IO window: disabled > pci 0000:00:1c.5: MEM window: 0xe2c00000-0xe2cfffff > pci 0000:00:1c.5: PREFETCH window: disabled > pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:1c.0: setting latency timer to 64 > pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.1: setting latency timer to 64 > pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > pci 0000:00:1c.2: setting latency timer to 64 > pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 > pci 0000:00:1c.3: setting latency timer to 64 > pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.5: setting latency timer to 64 > pci_bus 0000:00: resource 0 io: [0x00-0xffff] > pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] > pci_bus 0000:02: resource 1 mem: [0xe2d00000-0xe2dfffff] > pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] > pci_bus 0000:03: resource 1 mem: [0xe2200000-0xe2bfffff] > pci_bus 0000:03: resource 2 pref mem [0xe0a00000-0xe13fffff] > pci_bus 0000:09: resource 0 io: [0x2000-0x2fff] > pci_bus 0000:09: resource 1 mem: [0xe1800000-0xe21fffff] > pci_bus 0000:09: resource 2 pref mem [0xe0000000-0xe09fffff] > pci_bus 0000:0a: resource 1 mem: [0xe2c00000-0xe2cfffff] > NET: Registered protocol family 2 > IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > TCP established hash table entries: 131072 (order: 8, 1048576 bytes) > TCP bind hash table entries: 65536 (order: 7, 524288 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > NET: Registered protocol family 1 > pci 0000:00:02.0: Boot video device > Trying to unpack rootfs image as initramfs... > Freeing initrd memory: 7711k freed > Simple Boot Flag at 0xf3 set to 0x1 > MCE: bind virq for DOM0 logging > MCE_DOM0_LOG: enter dom0 mce vIRQ handler > MCE_DOM0_LOG: No more urgent data > MCE_DOM0_LOG: No more nonurgent data > VFS: Disk quotas dquot_6.5.2 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > msgmni has been set to 379 > alg: No test for stdrng (krng) > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > vesafb: framebuffer at 0xd0000000, mapped to 0xf0080000, using 1200k, total 65472k > vesafb: mode is 640x480x16, linelength=1280, pages=0 > vesafb: scrolling: redraw > vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 > fb0: VESA VGA frame buffer device > floppy0: Unable to grab DMA2 for the floppy driver > floppy0: no floppy controllers found > brd: module loaded > loop: module loaded > Xen virtual console successfully installed as hvc0 > Event-channel device installed. > blktap_device_init: blktap device major 253 > blktap_ring_init: blktap ring major: 253 > netfront: Initialising virtual ethernet driver. > Uniform Multi-Platform E-IDE driver > PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 > i8042.c: Warning: Keylock active. > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > NET: Registered protocol family 17 > registered taskstats version 1 > input: AT Translated Set 2 keyboard as /class/input/input0 > PCI IO multiplexer device installed. > BIOS EDD facility v0.16 2004-Jun-25, 1 devices found > Freeing unused kernel memory: 316k freed > Console: switching to colour frame buffer device 80x30 > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > ehci_hcd 0000:00:1a.0: setting latency timer to 64 > ehci_hcd 0000:00:1a.0: EHCI Host Controller > ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:1a.0: debug port 2 > ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported > ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe2e70000 > ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 3 ports detected > ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > ehci_hcd 0000:00:1d.0: setting latency timer to 64 > ehci_hcd 0000:00:1d.0: EHCI Host Controller > ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > ehci_hcd 0000:00:1d.0: debug port 2 > ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported > ehci_hcd 0000:00:1d.0: irq 17, io mem 0xe2e50000 > ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 3 ports detected > ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > uhci_hcd: USB Universal Host Controller Interface driver > SCSI subsystem initialized > libata version 3.00 loaded. > ahci 0000:00:1f.2: version 3.0 > ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > ahci 0000:00:1f.2: irq 1279 (279) for MSI/MSI-X > ahci: SSS flag set, parallel bus scan disabled > ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode > ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst > ahci 0000:00:1f.2: setting latency timer to 64 > scsi0 : ahci > scsi1 : ahci > scsi2 : ahci > scsi3 : ahci > scsi4 : ahci > scsi5 : ahci > ata1: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40100 irq 1279 > ata2: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40180 irq 1279 > ata3: DUMMY > ata4: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40280 irq 1279 > ata5: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40300 irq 1279 > ata6: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40380 irq 1279 > input: PS/2 Generic Mouse as /class/input/input1 > usb 1-1: new high speed USB device using ehci_hcd and address 2 > usb 1-1: configuration #1 chosen from 1 choice > hub 1-1:1.0: USB hub found > hub 1-1:1.0: 6 ports detected > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > usb 2-1: new high speed USB device using ehci_hcd and address 2 > ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) > ata1.00: ATA-8: ST9500423AS, 0002DEM1, max UDMA/133 > ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) > ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) > ata1.00: configured for UDMA/133 > scsi 0:0:0:0: Direct-Access ATA ST9500423AS 0002 PQ: 0 ANSI: 5 > sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) > sd 0:0:0:0: [sda] 4096-byte physical blocks > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sda: sda1 sda2 sda3 > sd 0:0:0:0: [sda] Attached SCSI disk > usb 2-1: configuration #1 chosen from 1 choice > hub 2-1:1.0: USB hub found > hub 2-1:1.0: 8 ports detected > usb 1-1.4: new full speed USB device using ehci_hcd and address 3 > usb 1-1.4: configuration #1 chosen from 1 choice > usb 1-1.5: new high speed USB device using ehci_hcd and address 4 > usb 1-1.5: configuration #1 chosen from 1 choice > ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU60N, A102, max UDMA/133, ATAPI AN > ata2.00: configured for UDMA/133 > scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GU60N A102 PQ: 0 ANSI: 5 > usb 2-1.8: new full speed USB device using ehci_hcd and address 3 > usb 2-1.8: configuration #0 chosen from 1 choice > usb 2-1.8: config 0 descriptor?? > ata4: SATA link down (SStatus 0 SControl 300) > ata5: SATA link down (SStatus 0 SControl 300) > ata6: SATA link down (SStatus 0 SControl 300) > device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com > kjournald starting. Commit interval 15 seconds > EXT3-fs: mounted filesystem with ordered data mode. > input: PC Speaker as /class/input/input2 > Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled > serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > 0000:00:16.3: ttyS0 at I/O 0x40e0 (irq = 17) is a 16550A > e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-NAPI > e1000e: Copyright(c) 1999 - 2010 Intel Corporation. > e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > e1000e 0000:00:19.0: setting latency timer to 64 > e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X > rtc_cmos 00:06: RTC can wake from S4 > rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 > rtc0: alarms up to one year, y3k, 242 bytes nvram > parport_pc 00:08: activated > parport_pc 00:08: reported by Plug and Play ACPI > parport_pc 00:08: disabled > e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) d4:be:d9:0f:d0:6c > e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection > e1000e 0000:00:19.0: eth0: MAC: 11, PHY: 11, PBA No: 3041FF-0FF > i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > ACPI: I/O resource 0000:00:1f.3 [0x4040-0x405f] conflicts with ACPI region SMBI [0x4040-0x404f] > ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver > ACPI: SSDT cadd7798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903) > ACPI: SSDT cadd8a98 00303 (v01 PmRef ApIst 00003000 INTL 20090903) > ACPI: SSDT cadd6d98 00119 (v01 PmRef ApCst 00003000 INTL 20090903) > input: Lid Switch as /class/input/input3 > ACPI: Lid Switch [LID] > input: Power Button as /class/input/input4 > ACPI: Power Button [PBTN] > input: Sleep Button as /class/input/input5 > ACPI: Sleep Button [SBTN] > input: Power Button as /class/input/input6 > ACPI: Power Button [PWRF] > thermal LNXTHERM:01: registered as thermal_zone0 > ACPI: Thermal Zone [THM] (25 C) > sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray > Uniform CD-ROM driver Revision: 3.20 > sr 1:0:0:0: Attached scsi CD-ROM sr0 > Compat-wireless backport release: compat-wireless-v3.4-rc1-2 > Backport based on linux-stable.git v3.4-rc1 > cfg80211: Calling CRDA to update world regulatory domain > ACPI: AC Adapter [AC] (on-line) > sd 0:0:0:0: Attached scsi generic sg0 type 0 > sr 1:0:0:0: Attached scsi generic sg1 type 5 > ACPI: Battery Slot [BAT0] (battery present) > ACPI: Battery Slot [BAT1] (battery absent) > ACPI: Battery Slot [BAT2] (battery absent) > Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: > Copyright(c) 2003-2012 Intel Corporation > iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > iwlwifi 0000:02:00.0: setting latency timer to 64 > iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 > iwlwifi 0000:02:00.0: pci_resource_base = f2478000 > iwlwifi 0000:02:00.0: HW Revision ID = 0x34 > iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X > acpi device:37: registered as cooling_device8 > input: Video Bus as /class/input/input7 > ACPI: Video Device [VID] (multi-head: yes rom: no post: no) > Non-volatile memory driver v1.3 > lp: driver loaded but no devices found > md: Autodetecting RAID arrays. > md: Scanned 0 and added 0 devices. > md: autorun ... > md: ... autorun DONE. > EXT3 FS on sda1, internal journal > ISO 9660 Extensions: Microsoft Joliet Level 3 > ISO 9660 Extensions: RRIP_1991A > Adding 524280k swap on /var/swap/swap.001. Priority:-1 extents:137 across:637248k > Microcode Update Driver: v2.00-xen <tigran@aivazian.fsnet.co.uk>, Peter Oruba > Microcode Update Driver: v2.00-xen removed. > ip_tables: (C) 2000-2006 Netfilter Core Team > nf_conntrack version 0.5.0 (12157 buckets, 48628 max) > e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X > e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X > 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> > All bugs added by David S. Miller <davem@redhat.com> > device xenbr0 entered promiscuous mode > device eth0 entered promiscuous mode > e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX > e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > RPC: Registered tcp NFSv4.1 backchannel transport module. > warning: `ntpdate' uses 32-bit capabilities (legacy support in use) > suspend: event channel 38 > kjournald starting. Commit interval 15 seconds > EXT3 FS on dm-0, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > iwlwifi 0000:02:00.0: ea4b7e1c > iwlwifi 0000:02:00.0: ca253e1c > iwlwifi 0000:02:00.0: ca253de8 > iwlwifi 0000:02:00.0: PCI INT A disabled > > Ok, can you please set all the debug flags. Since nothing happens here we shouldn't' see that many debug prints: modprobe iwlwifi debug=0xffffffff thanks ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-18 19:25 ` Emmanuel Grumbach @ 2012-04-18 19:28 ` Dominik Feser 2012-04-18 19:33 ` Emmanuel Grumbach 0 siblings, 1 reply; 48+ messages in thread From: Dominik Feser @ 2012-04-18 19:28 UTC (permalink / raw) To: Emmanuel Grumbach Cc: Dominik Feser, Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy Thumb question but how do I compile the driver with debug support? I think its missing... In which file do I have to enable the debug stuff? # modprobe iwlwifi debug=0xffffffff FATAL: Error inserting iwlwifi (/lib/modules/2.6.32.12-0.7.1/updates/drivers/net/wireless/iwlwifi/iwlwifi.ko): Unknown symbol in module, or unknown parameter (see dmesg) Am 18.04.2012 um 21:25 schrieb Emmanuel Grumbach: > On Wed, Apr 18, 2012 at 19:56, Dominik Feser > <dominik.feser@googlemail.com> wrote: >> OK, that was the firmware I had tried before. I deleted it because it did not work, too. >> >> Here is the output you wanted: >> # ls /lib/firmware/iwlwifi-6000* >> /lib/firmware/iwlwifi-6000g2a-5.ucode >> >> After copying the firmware there again and rebooting dmesg looks like this: >> # dmesg | grep iwl >> iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >> iwlwifi 0000:02:00.0: setting latency timer to 64 >> iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 >> iwlwifi 0000:02:00.0: pci_resource_base = f2478000 >> iwlwifi 0000:02:00.0: HW Revision ID = 0x34 >> iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X >> iwlwifi 0000:02:00.0: ea4b7e1c >> >> Still no wlan0 for me... >> >> Full dmesg: >> # dmesg >> Reserving virtual address space above 0xff400000 >> Linux version 2.6.32.12-0.7.1 (geeko@buildhost) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #6 SMP Mon Apr 16 19:31:06 EDT 2012 >> KERNEL supported cpus: >> Intel GenuineIntel >> AMD AuthenticAMD >> NSC Geode by NSC >> Cyrix CyrixInstead >> Centaur CentaurHauls >> Transmeta GenuineTMx86 >> Transmeta TransmetaCPU >> Xen-provided machine memory map: >> BIOS: 0000000000000000 - 000000000009a800 (usable) >> BIOS: 000000000009a800 - 00000000000a0000 (reserved) >> BIOS: 00000000000e0000 - 0000000000100000 (reserved) >> BIOS: 0000000000100000 - 0000000020000000 (usable) >> BIOS: 0000000020000000 - 0000000020200000 (reserved) >> BIOS: 0000000020200000 - 0000000040000000 (usable) >> BIOS: 0000000040000000 - 0000000040200000 (reserved) >> BIOS: 0000000040200000 - 00000000caa25000 (usable) >> BIOS: 00000000caa25000 - 00000000caa69000 (reserved) >> BIOS: 00000000caa69000 - 00000000cadb7000 (usable) >> BIOS: 00000000cadb7000 - 00000000cade7000 (reserved) >> BIOS: 00000000cade7000 - 00000000cafe7000 (ACPI NVS) >> BIOS: 00000000cafe7000 - 00000000cafff000 (ACPI data) >> BIOS: 00000000cafff000 - 00000000cb000000 (usable) >> BIOS: 00000000cb800000 - 00000000cfa00000 (reserved) >> BIOS: 00000000fec00000 - 00000000fec01000 (reserved) >> BIOS: 00000000fed1c000 - 00000000fed20000 (reserved) >> BIOS: 00000000fee00000 - 00000000fee01000 (reserved) >> BIOS: 00000000ffc00000 - 00000000ffc20000 (reserved) >> BIOS: 0000000100000000 - 000000022e000000 (usable) >> Xen-provided physical RAM map: >> Xen: 0000000000000000 - 000000002f800000 (usable) >> DMI 2.6 present. >> last_pfn = 0x2f800 max_arch_pfn = 0x10000000 >> initial memory mapped : 0 - 00000000 >> init_memory_mapping: 0000000000000000-000000002f800000 >> NX (Execute Disable) protection: active >> 0000000000 - 002f800000 page 4k >> kernel direct mapping tables up to 2f800000 @ e4e000-fcf000 >> RAMDISK: 005f9000 - 00d80e00 >> ACPI: RSDP 000fe300 00024 (v02 DELL ) >> ACPI: XSDT caffde18 0007C (v01 DELL CBX3 06222004 MSFT 00010013) >> ACPI: FACP caf87d98 000F4 (v04 DELL CBX3 06222004 MSFT 00010013) >> ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20090903/tbfadt-369) >> ACPI Warning: 32/64X FACS address mismatch in FADT - CAFE4E40/00000000CAFE4D40, using 32 (20090903/tbfadt-486) >> ACPI: DSDT caf55018 087F6 (v02 INT430 SYSFexxx 00001001 INTL 20090903) >> ACPI: FACS cafe4e40 00040 >> ACPI: APIC caffcf18 000CC (v02 DELL CBX3 06222004 MSFT 00010013) >> ACPI: TCPA cafe5d18 00032 (v02 00000000 00000000) >> ACPI: SSDT caf88a98 002F9 (v01 DELLTP TPM 00003000 INTL 20090903) >> ACPI: MCFG cafe5c98 0003C (v01 DELL SNDYBRDG 06222004 MSFT 00000097) >> ACPI: HPET cafe5c18 00038 (v01 A M I PCHHPET 06222004 AMI. 00000003) >> ACPI: BOOT cafe5b98 00028 (v01 DELL CBX3 06222004 AMI 00010013) >> ACPI: SSDT caf6c018 00888 (v01 PmRef Cpu0Ist 00003000 INTL 20090903) >> ACPI: SSDT caf6b018 00996 (v01 PmRef CpuPm 00003000 INTL 20090903) >> ACPI: XMAR caf87c18 000E8 (v01 INTEL SNB 00000001 INTL 00000001) >> ACPI: SLIC caf75c18 00176 (v03 DELL CBX3 06222004 MSFT 00010013) >> 0MB HIGHMEM available. >> 760MB LOWMEM available. >> mapped low ram: 0 - 2f800000 >> low ram: 0 - 2f800000 >> node 0 low ram: 00000000 - 2f000000 >> node 0 bootmap 00000000 - 00005e00 >> (5 early reservations) ==> bootmem [0000000000 - 002f000000] >> #0 [0000100000 - 00005d8284] TEXT DATA BSS ==> [0000100000 - 00005d8284] >> #1 [00005f9000 - 0000e4e000] Xen provided ==> [00005f9000 - 0000e4e000] >> #2 [00005d9000 - 00005d91b3] BRK ==> [00005d9000 - 00005d91b3] >> #3 [0000e4e000 - 0000fc4000] PGTABLE ==> [0000e4e000 - 0000fc4000] >> #4 [0000000000 - 0000006000] BOOTMAP ==> [0000000000 - 0000006000] >> found SMP MP-table at [ff3eca70] 000f1a70 >> Zone PFN ranges: >> DMA 0x00000000 -> 0x00001000 >> Normal 0x00001000 -> 0x0002f800 >> HighMem 0x0002f800 -> 0x0002f800 >> Movable zone start PFN for each node >> early_node_map[2] active PFN ranges >> 0: 0x00000000 -> 0x0002f000 >> 0: 0x0002f800 -> 0x0002f800 >> On node 0 totalpages: 192512 >> free_area_init_node: node 0, pgdat c04ef300, node_mem_map c1002000 >> DMA zone: 32 pages used for memmap >> DMA zone: 0 pages reserved >> DMA zone: 4064 pages, LIFO batch:0 >> Normal zone: 1488 pages used for memmap >> Normal zone: 186928 pages, LIFO batch:31 >> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) >> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) >> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) >> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled) >> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled) >> ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled) >> ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled) >> ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled) >> ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled) >> ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled) >> ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled) >> ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled) >> ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled) >> ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled) >> ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled) >> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) >> IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 >> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >> ACPI: IRQ0 used by override. >> ACPI: IRQ2 used by override. >> ACPI: IRQ9 used by override. >> Using ACPI (MADT) for SMP configuration information >> Allocating PCI resources starting at cfa00000 (gap: cfa00000:2f200000) >> NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 >> PERCPU: Embedded 9 pages/cpu @c16b9000 s13720 r0 d23144 u65536 >> pcpu-alloc: s13720 r0 d23144 u65536 alloc=16*4096 >> pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 >> Swapping MFNs for PFN 544 and 16bb (MFN c9544 and c9f33) >> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 190992 >> Kernel command line: root=LABEL=root-hwkkxaxy ro xencons=hvc console=hvc0 console=tty0 quiet vga=785 splash >> PID hash table entries: 4096 (order: 2, 16384 bytes) >> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) >> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) >> Enabling fast FPU save and restore... done. >> Enabling unmasked SIMD FPU exception support... done. >> Initializing CPU#0 >> Software IO TLB enabled: >> Aperture: 64 megabytes >> Address size: 28 bits >> Kernel range: c17b2000 - c57b2000 >> PCI-DMA: Using software bounce buffering for IO (SWIOTLB) >> Initializing HighMem for node 0 (00000000:00000000) >> Memory: 681820k/778240k available (2591k kernel code, 88012k reserved, 1466k data, 316k init, 0k highmem) >> virtual kernel memory layout: >> fixmap : 0xff077000 - 0xff3ff000 (3616 kB) >> pkmap : 0xfec00000 - 0xfee00000 (2048 kB) >> vmalloc : 0xf0000000 - 0xfebfe000 ( 235 MB) >> lowmem : 0xc0000000 - 0xef800000 ( 760 MB) >> .init : 0xc04f7000 - 0xc0546000 ( 316 kB) >> .data : 0xc0387d67 - 0xc04f66f8 (1466 kB) >> .text : 0xc0100000 - 0xc0387d67 (2591 kB) >> Checking if this processor honours the WP bit even in supervisor mode...Ok. >> Hierarchical RCU implementation. >> NR_IRQS:2048 >> Extended CMOS year: 2000 >> Xen reported: 2793.780 MHz processor. >> Console: colour dummy device 80x25 >> console [tty0] enabled >> console [hvc0] enabled >> Calibrating delay using timer specific routine.. 5616.72 BogoMIPS (lpj=28083614) >> pid_max: default: 32768 minimum: 301 >> Security Framework initialized >> Mount-cache hash table entries: 512 >> mce: CPU supports 7 MCE banks >> Checking 'hlt' instruction... OK. >> SMP alternatives: switching to UP code >> ACPI: Core revision 20090903 >> SMP alternatives: switching to SMP code >> Initializing CPU#1 >> Initializing CPU#2 >> Brought up 4 CPUs >> Initializing CPU#3 >> Grant table version 2 >> NET: Registered protocol family 16 >> ACPI FADT declares the system doesn't support PCIe ASPM, so disable it >> ACPI: bus type pci registered >> PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 >> PCI: Not using MMCONFIG. >> PCI: Using configuration type 1 for base access >> bio: create slab <bio-0> at 0 >> ACPI: EC: Look up EC in DSDT >> ACPI: BIOS _OSI(Linux) query ignored >> ACPI: BIOS _OSI(Linux) query ignored >> ACPI: Interpreter enabled >> ACPI: (supports S0 S5) >> ACPI: Using IOAPIC for interrupt routing >> PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 >> PCI: MCFG area at f8000000 reserved in ACPI motherboard resources >> PCI: Using MMCONFIG for extended config space >> ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930 >> ACPI: No dock devices found. >> PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug >> _OSC invalid UUID >> ACPI: PCI Root Bridge [PCI0] (0000:00) >> pci 0000:00:02.0: reg 10 64bit mmio: [0xe1400000-0xe17fffff] >> pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff] >> pci 0000:00:02.0: reg 20 io port: [0x4000-0x403f] >> pci 0000:00:16.0: reg 10 64bit mmio: [0xe2eb0000-0xe2eb000f] >> pci 0000:00:16.0: PME# supported from D0 D3hot D3cold >> pci 0000:00:16.0: PME# disabled >> pci 0000:00:16.3: reg 10 io port: [0x40e0-0x40e7] >> pci 0000:00:16.3: reg 14 32bit mmio: [0xe2e90000-0xe2e90fff] >> pci 0000:00:19.0: reg 10 32bit mmio: [0xe2e00000-0xe2e1ffff] >> pci 0000:00:19.0: reg 14 32bit mmio: [0xe2e80000-0xe2e80fff] >> pci 0000:00:19.0: reg 18 io port: [0x4080-0x409f] >> pci 0000:00:19.0: PME# supported from D0 D3hot D3cold >> pci 0000:00:19.0: PME# disabled >> pci 0000:00:1a.0: reg 10 32bit mmio: [0xe2e70000-0xe2e703ff] >> pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold >> pci 0000:00:1a.0: PME# disabled >> pci 0000:00:1b.0: reg 10 64bit mmio: [0xe2e60000-0xe2e63fff] >> pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold >> pci 0000:00:1b.0: PME# disabled >> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold >> pci 0000:00:1c.0: PME# disabled >> pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold >> pci 0000:00:1c.1: PME# disabled >> pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold >> pci 0000:00:1c.2: PME# disabled >> pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold >> pci 0000:00:1c.3: PME# disabled >> pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold >> pci 0000:00:1c.5: PME# disabled >> pci 0000:00:1d.0: reg 10 32bit mmio: [0xe2e50000-0xe2e503ff] >> pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold >> pci 0000:00:1d.0: PME# disabled >> pci 0000:00:1f.2: reg 10 io port: [0x40d0-0x40d7] >> pci 0000:00:1f.2: reg 14 io port: [0x40c0-0x40c3] >> pci 0000:00:1f.2: reg 18 io port: [0x40b0-0x40b7] >> pci 0000:00:1f.2: reg 1c io port: [0x40a0-0x40a3] >> pci 0000:00:1f.2: reg 20 io port: [0x4060-0x407f] >> pci 0000:00:1f.2: reg 24 32bit mmio: [0xe2e40000-0xe2e407ff] >> pci 0000:00:1f.2: PME# supported from D3hot >> pci 0000:00:1f.2: PME# disabled >> pci 0000:00:1f.3: reg 10 64bit mmio: [0xe2e30000-0xe2e300ff] >> pci 0000:00:1f.3: reg 20 io port: [0x4040-0x405f] >> pci 0000:00:1c.0: PCI bridge to [bus 01-01] >> pci 0000:02:00.0: reg 10 64bit mmio: [0xe2d00000-0xe2d01fff] >> pci 0000:02:00.0: PME# supported from D0 D3hot D3cold >> pci 0000:02:00.0: PME# disabled >> pci 0000:00:1c.1: PCI bridge to [bus 02-02] >> pci 0000:00:1c.1: bridge 32bit mmio: [0xe2d00000-0xe2dfffff] >> pci 0000:00:1c.2: PCI bridge to [bus 03-08] >> pci 0000:00:1c.2: bridge io port: [0x3000-0x3fff] >> pci 0000:00:1c.2: bridge 32bit mmio: [0xe2200000-0xe2bfffff] >> pci 0000:00:1c.2: bridge 64bit mmio pref: [0xe0a00000-0xe13fffff] >> pci 0000:00:1c.3: PCI bridge to [bus 09-09] >> pci 0000:00:1c.3: bridge io port: [0x2000-0x2fff] >> pci 0000:00:1c.3: bridge 32bit mmio: [0xe1800000-0xe21fffff] >> pci 0000:00:1c.3: bridge 64bit mmio pref: [0xe0000000-0xe09fffff] >> pci 0000:0a:00.0: reg 10 32bit mmio: [0xe2c20000-0xe2c201ff] >> pci 0000:0a:00.0: supports D1 D2 >> pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold >> pci 0000:0a:00.0: PME# disabled >> pci 0000:0a:00.1: reg 10 32bit mmio: [0xe2c10000-0xe2c10fff] >> pci 0000:0a:00.1: reg 18 32bit mmio: [0xe2c00000-0xe2c007ff] >> pci 0000:0a:00.1: supports D1 D2 >> pci 0000:0a:00.1: PME# supported from D0 D1 D2 D3hot D3cold >> pci 0000:0a:00.1: PME# disabled >> pci 0000:00:1c.5: PCI bridge to [bus 0a-0a] >> pci 0000:00:1c.5: bridge 32bit mmio: [0xe2c00000-0xe2cfffff] >> pci_bus 0000:00: on NUMA node 0 >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] >> _OSC invalid UUID >> ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 >> ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 >> ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 >> ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 >> ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15) >> ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. >> ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15) >> ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. >> xen_mem: Initialising balloon driver. >> vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none >> vgaarb: loaded >> PCI: Using ACPI for IRQ routing >> Switching to clocksource xen >> pnp: PnP ACPI init >> ACPI: bus type pnp registered >> pnp: PnP ACPI: found 13 devices >> ACPI: ACPI bus type pnp unregistered >> system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved >> system 00:05: ioport range 0x680-0x69f has been reserved >> system 00:05: ioport range 0x1000-0x100f has been reserved >> system 00:05: ioport range 0xffff-0xffff has been reserved >> system 00:05: ioport range 0xffff-0xffff has been reserved >> system 00:05: ioport range 0x400-0x47f has been reserved >> system 00:05: ioport range 0x500-0x57f has been reserved >> system 00:05: ioport range 0x164e-0x164f has been reserved >> system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved >> system 00:0a: iomem range 0xfed10000-0xfed17fff has been reserved >> system 00:0a: iomem range 0xfed18000-0xfed18fff has been reserved >> system 00:0a: iomem range 0xfed19000-0xfed19fff has been reserved >> system 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved >> system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved >> system 00:0a: iomem range 0xfed90000-0xfed93fff has been reserved >> system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved >> system 00:0a: iomem range 0xff000000-0xffffffff could not be reserved >> system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved >> system 00:0c: iomem range 0x20000000-0x201fffff has been reserved >> system 00:0c: iomem range 0x40000000-0x401fffff has been reserved >> pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 >> pci 0000:00:1c.0: IO window: disabled >> pci 0000:00:1c.0: MEM window: disabled >> pci 0000:00:1c.0: PREFETCH window: disabled >> pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 >> pci 0000:00:1c.1: IO window: disabled >> pci 0000:00:1c.1: MEM window: 0xe2d00000-0xe2dfffff >> pci 0000:00:1c.1: PREFETCH window: disabled >> pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 >> pci 0000:00:1c.2: IO window: 0x3000-0x3fff >> pci 0000:00:1c.2: MEM window: 0xe2200000-0xe2bfffff >> pci 0000:00:1c.2: PREFETCH window: 0x000000e0a00000-0x000000e13fffff >> pci 0000:00:1c.3: PCI bridge, secondary bus 0000:09 >> pci 0000:00:1c.3: IO window: 0x2000-0x2fff >> pci 0000:00:1c.3: MEM window: 0xe1800000-0xe21fffff >> pci 0000:00:1c.3: PREFETCH window: 0x000000e0000000-0x000000e09fffff >> pci 0000:00:1c.5: PCI bridge, secondary bus 0000:0a >> pci 0000:00:1c.5: IO window: disabled >> pci 0000:00:1c.5: MEM window: 0xe2c00000-0xe2cfffff >> pci 0000:00:1c.5: PREFETCH window: disabled >> pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >> pci 0000:00:1c.0: setting latency timer to 64 >> pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 >> pci 0000:00:1c.1: setting latency timer to 64 >> pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >> pci 0000:00:1c.2: setting latency timer to 64 >> pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 >> pci 0000:00:1c.3: setting latency timer to 64 >> pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 >> pci 0000:00:1c.5: setting latency timer to 64 >> pci_bus 0000:00: resource 0 io: [0x00-0xffff] >> pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] >> pci_bus 0000:02: resource 1 mem: [0xe2d00000-0xe2dfffff] >> pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] >> pci_bus 0000:03: resource 1 mem: [0xe2200000-0xe2bfffff] >> pci_bus 0000:03: resource 2 pref mem [0xe0a00000-0xe13fffff] >> pci_bus 0000:09: resource 0 io: [0x2000-0x2fff] >> pci_bus 0000:09: resource 1 mem: [0xe1800000-0xe21fffff] >> pci_bus 0000:09: resource 2 pref mem [0xe0000000-0xe09fffff] >> pci_bus 0000:0a: resource 1 mem: [0xe2c00000-0xe2cfffff] >> NET: Registered protocol family 2 >> IP route cache hash table entries: 32768 (order: 5, 131072 bytes) >> TCP established hash table entries: 131072 (order: 8, 1048576 bytes) >> TCP bind hash table entries: 65536 (order: 7, 524288 bytes) >> TCP: Hash tables configured (established 131072 bind 65536) >> TCP reno registered >> NET: Registered protocol family 1 >> pci 0000:00:02.0: Boot video device >> Trying to unpack rootfs image as initramfs... >> Freeing initrd memory: 7711k freed >> Simple Boot Flag at 0xf3 set to 0x1 >> MCE: bind virq for DOM0 logging >> MCE_DOM0_LOG: enter dom0 mce vIRQ handler >> MCE_DOM0_LOG: No more urgent data >> MCE_DOM0_LOG: No more nonurgent data >> VFS: Disk quotas dquot_6.5.2 >> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) >> msgmni has been set to 379 >> alg: No test for stdrng (krng) >> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) >> io scheduler noop registered >> io scheduler anticipatory registered >> io scheduler deadline registered >> io scheduler cfq registered (default) >> vesafb: framebuffer at 0xd0000000, mapped to 0xf0080000, using 1200k, total 65472k >> vesafb: mode is 640x480x16, linelength=1280, pages=0 >> vesafb: scrolling: redraw >> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 >> fb0: VESA VGA frame buffer device >> floppy0: Unable to grab DMA2 for the floppy driver >> floppy0: no floppy controllers found >> brd: module loaded >> loop: module loaded >> Xen virtual console successfully installed as hvc0 >> Event-channel device installed. >> blktap_device_init: blktap device major 253 >> blktap_ring_init: blktap ring major: 253 >> netfront: Initialising virtual ethernet driver. >> Uniform Multi-Platform E-IDE driver >> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 >> i8042.c: Warning: Keylock active. >> serio: i8042 KBD port at 0x60,0x64 irq 1 >> serio: i8042 AUX port at 0x60,0x64 irq 12 >> mice: PS/2 mouse device common for all mice >> NET: Registered protocol family 17 >> registered taskstats version 1 >> input: AT Translated Set 2 keyboard as /class/input/input0 >> PCI IO multiplexer device installed. >> BIOS EDD facility v0.16 2004-Jun-25, 1 devices found >> Freeing unused kernel memory: 316k freed >> Console: switching to colour frame buffer device 80x30 >> usbcore: registered new interface driver usbfs >> usbcore: registered new interface driver hub >> usbcore: registered new device driver usb >> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver >> ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >> ehci_hcd 0000:00:1a.0: setting latency timer to 64 >> ehci_hcd 0000:00:1a.0: EHCI Host Controller >> ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 >> ehci_hcd 0000:00:1a.0: debug port 2 >> ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported >> ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe2e70000 >> ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 >> usb usb1: configuration #1 chosen from 1 choice >> hub 1-0:1.0: USB hub found >> hub 1-0:1.0: 3 ports detected >> ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >> ehci_hcd 0000:00:1d.0: setting latency timer to 64 >> ehci_hcd 0000:00:1d.0: EHCI Host Controller >> ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 >> ehci_hcd 0000:00:1d.0: debug port 2 >> ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported >> ehci_hcd 0000:00:1d.0: irq 17, io mem 0xe2e50000 >> ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 >> usb usb2: configuration #1 chosen from 1 choice >> hub 2-0:1.0: USB hub found >> hub 2-0:1.0: 3 ports detected >> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver >> uhci_hcd: USB Universal Host Controller Interface driver >> SCSI subsystem initialized >> libata version 3.00 loaded. >> ahci 0000:00:1f.2: version 3.0 >> ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >> ahci 0000:00:1f.2: irq 1279 (279) for MSI/MSI-X >> ahci: SSS flag set, parallel bus scan disabled >> ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode >> ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst >> ahci 0000:00:1f.2: setting latency timer to 64 >> scsi0 : ahci >> scsi1 : ahci >> scsi2 : ahci >> scsi3 : ahci >> scsi4 : ahci >> scsi5 : ahci >> ata1: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40100 irq 1279 >> ata2: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40180 irq 1279 >> ata3: DUMMY >> ata4: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40280 irq 1279 >> ata5: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40300 irq 1279 >> ata6: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40380 irq 1279 >> input: PS/2 Generic Mouse as /class/input/input1 >> usb 1-1: new high speed USB device using ehci_hcd and address 2 >> usb 1-1: configuration #1 chosen from 1 choice >> hub 1-1:1.0: USB hub found >> hub 1-1:1.0: 6 ports detected >> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> usb 2-1: new high speed USB device using ehci_hcd and address 2 >> ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) >> ata1.00: ATA-8: ST9500423AS, 0002DEM1, max UDMA/133 >> ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) >> ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) >> ata1.00: configured for UDMA/133 >> scsi 0:0:0:0: Direct-Access ATA ST9500423AS 0002 PQ: 0 ANSI: 5 >> sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) >> sd 0:0:0:0: [sda] 4096-byte physical blocks >> sd 0:0:0:0: [sda] Write Protect is off >> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >> sda: sda1 sda2 sda3 >> sd 0:0:0:0: [sda] Attached SCSI disk >> usb 2-1: configuration #1 chosen from 1 choice >> hub 2-1:1.0: USB hub found >> hub 2-1:1.0: 8 ports detected >> usb 1-1.4: new full speed USB device using ehci_hcd and address 3 >> usb 1-1.4: configuration #1 chosen from 1 choice >> usb 1-1.5: new high speed USB device using ehci_hcd and address 4 >> usb 1-1.5: configuration #1 chosen from 1 choice >> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU60N, A102, max UDMA/133, ATAPI AN >> ata2.00: configured for UDMA/133 >> scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GU60N A102 PQ: 0 ANSI: 5 >> usb 2-1.8: new full speed USB device using ehci_hcd and address 3 >> usb 2-1.8: configuration #0 chosen from 1 choice >> usb 2-1.8: config 0 descriptor?? >> ata4: SATA link down (SStatus 0 SControl 300) >> ata5: SATA link down (SStatus 0 SControl 300) >> ata6: SATA link down (SStatus 0 SControl 300) >> device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com >> kjournald starting. Commit interval 15 seconds >> EXT3-fs: mounted filesystem with ordered data mode. >> input: PC Speaker as /class/input/input2 >> Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled >> serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 >> 0000:00:16.3: ttyS0 at I/O 0x40e0 (irq = 17) is a 16550A >> e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-NAPI >> e1000e: Copyright(c) 1999 - 2010 Intel Corporation. >> e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 >> e1000e 0000:00:19.0: setting latency timer to 64 >> e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X >> rtc_cmos 00:06: RTC can wake from S4 >> rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 >> rtc0: alarms up to one year, y3k, 242 bytes nvram >> parport_pc 00:08: activated >> parport_pc 00:08: reported by Plug and Play ACPI >> parport_pc 00:08: disabled >> e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) d4:be:d9:0f:d0:6c >> e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection >> e1000e 0000:00:19.0: eth0: MAC: 11, PHY: 11, PBA No: 3041FF-0FF >> i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >> ACPI: I/O resource 0000:00:1f.3 [0x4040-0x405f] conflicts with ACPI region SMBI [0x4040-0x404f] >> ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver >> ACPI: SSDT cadd7798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903) >> ACPI: SSDT cadd8a98 00303 (v01 PmRef ApIst 00003000 INTL 20090903) >> ACPI: SSDT cadd6d98 00119 (v01 PmRef ApCst 00003000 INTL 20090903) >> input: Lid Switch as /class/input/input3 >> ACPI: Lid Switch [LID] >> input: Power Button as /class/input/input4 >> ACPI: Power Button [PBTN] >> input: Sleep Button as /class/input/input5 >> ACPI: Sleep Button [SBTN] >> input: Power Button as /class/input/input6 >> ACPI: Power Button [PWRF] >> thermal LNXTHERM:01: registered as thermal_zone0 >> ACPI: Thermal Zone [THM] (25 C) >> sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray >> Uniform CD-ROM driver Revision: 3.20 >> sr 1:0:0:0: Attached scsi CD-ROM sr0 >> Compat-wireless backport release: compat-wireless-v3.4-rc1-2 >> Backport based on linux-stable.git v3.4-rc1 >> cfg80211: Calling CRDA to update world regulatory domain >> ACPI: AC Adapter [AC] (on-line) >> sd 0:0:0:0: Attached scsi generic sg0 type 0 >> sr 1:0:0:0: Attached scsi generic sg1 type 5 >> ACPI: Battery Slot [BAT0] (battery present) >> ACPI: Battery Slot [BAT1] (battery absent) >> ACPI: Battery Slot [BAT2] (battery absent) >> Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: >> Copyright(c) 2003-2012 Intel Corporation >> iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >> iwlwifi 0000:02:00.0: setting latency timer to 64 >> iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 >> iwlwifi 0000:02:00.0: pci_resource_base = f2478000 >> iwlwifi 0000:02:00.0: HW Revision ID = 0x34 >> iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X >> acpi device:37: registered as cooling_device8 >> input: Video Bus as /class/input/input7 >> ACPI: Video Device [VID] (multi-head: yes rom: no post: no) >> Non-volatile memory driver v1.3 >> lp: driver loaded but no devices found >> md: Autodetecting RAID arrays. >> md: Scanned 0 and added 0 devices. >> md: autorun ... >> md: ... autorun DONE. >> EXT3 FS on sda1, internal journal >> ISO 9660 Extensions: Microsoft Joliet Level 3 >> ISO 9660 Extensions: RRIP_1991A >> Adding 524280k swap on /var/swap/swap.001. Priority:-1 extents:137 across:637248k >> Microcode Update Driver: v2.00-xen <tigran@aivazian.fsnet.co.uk>, Peter Oruba >> Microcode Update Driver: v2.00-xen removed. >> ip_tables: (C) 2000-2006 Netfilter Core Team >> nf_conntrack version 0.5.0 (12157 buckets, 48628 max) >> e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X >> e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X >> 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> >> All bugs added by David S. Miller <davem@redhat.com> >> device xenbr0 entered promiscuous mode >> device eth0 entered promiscuous mode >> e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX >> e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO >> RPC: Registered udp transport module. >> RPC: Registered tcp transport module. >> RPC: Registered tcp NFSv4.1 backchannel transport module. >> warning: `ntpdate' uses 32-bit capabilities (legacy support in use) >> suspend: event channel 38 >> kjournald starting. Commit interval 15 seconds >> EXT3 FS on dm-0, internal journal >> EXT3-fs: mounted filesystem with ordered data mode. >> iwlwifi 0000:02:00.0: ea4b7e1c >> iwlwifi 0000:02:00.0: ca253e1c >> iwlwifi 0000:02:00.0: ca253de8 >> iwlwifi 0000:02:00.0: PCI INT A disabled >> >> > > Ok, can you please set all the debug flags. Since nothing happens here > we shouldn't' see that many debug prints: > > modprobe iwlwifi debug=0xffffffff > > thanks ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-18 19:28 ` Dominik Feser @ 2012-04-18 19:33 ` Emmanuel Grumbach 2012-04-18 21:17 ` Dominik Feser 2012-04-19 7:25 ` Dominik Feser 0 siblings, 2 replies; 48+ messages in thread From: Emmanuel Grumbach @ 2012-04-18 19:33 UTC (permalink / raw) To: Dominik Feser; +Cc: Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy On Wed, Apr 18, 2012 at 22:28, Dominik Feser <dominik.feser@googlemail.com> wrote: > Thumb question but how do I compile the driver with debug support? I think its missing... > In which file do I have to enable the debug stuff? > > # modprobe iwlwifi debug=0xffffffff > FATAL: Error inserting iwlwifi (/lib/modules/2.6.32.12-0.7.1/updates/drivers/net/wireless/iwlwifi/iwlwifi.ko): Unknown symbol in module, or unknown parameter (see dmesg) > > You need to enable CONFIG_IWLWIFI_DEBUG in your .config file. > > Am 18.04.2012 um 21:25 schrieb Emmanuel Grumbach: > >> On Wed, Apr 18, 2012 at 19:56, Dominik Feser >> <dominik.feser@googlemail.com> wrote: >>> OK, that was the firmware I had tried before. I deleted it because it did not work, too. >>> >>> Here is the output you wanted: >>> # ls /lib/firmware/iwlwifi-6000* >>> /lib/firmware/iwlwifi-6000g2a-5.ucode >>> >>> After copying the firmware there again and rebooting dmesg looks like this: >>> # dmesg | grep iwl >>> iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>> iwlwifi 0000:02:00.0: setting latency timer to 64 >>> iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 >>> iwlwifi 0000:02:00.0: pci_resource_base = f2478000 >>> iwlwifi 0000:02:00.0: HW Revision ID = 0x34 >>> iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X >>> iwlwifi 0000:02:00.0: ea4b7e1c >>> >>> Still no wlan0 for me... >>> >>> Full dmesg: >>> # dmesg >>> Reserving virtual address space above 0xff400000 >>> Linux version 2.6.32.12-0.7.1 (geeko@buildhost) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #6 SMP Mon Apr 16 19:31:06 EDT 2012 >>> KERNEL supported cpus: >>> Intel GenuineIntel >>> AMD AuthenticAMD >>> NSC Geode by NSC >>> Cyrix CyrixInstead >>> Centaur CentaurHauls >>> Transmeta GenuineTMx86 >>> Transmeta TransmetaCPU >>> Xen-provided machine memory map: >>> BIOS: 0000000000000000 - 000000000009a800 (usable) >>> BIOS: 000000000009a800 - 00000000000a0000 (reserved) >>> BIOS: 00000000000e0000 - 0000000000100000 (reserved) >>> BIOS: 0000000000100000 - 0000000020000000 (usable) >>> BIOS: 0000000020000000 - 0000000020200000 (reserved) >>> BIOS: 0000000020200000 - 0000000040000000 (usable) >>> BIOS: 0000000040000000 - 0000000040200000 (reserved) >>> BIOS: 0000000040200000 - 00000000caa25000 (usable) >>> BIOS: 00000000caa25000 - 00000000caa69000 (reserved) >>> BIOS: 00000000caa69000 - 00000000cadb7000 (usable) >>> BIOS: 00000000cadb7000 - 00000000cade7000 (reserved) >>> BIOS: 00000000cade7000 - 00000000cafe7000 (ACPI NVS) >>> BIOS: 00000000cafe7000 - 00000000cafff000 (ACPI data) >>> BIOS: 00000000cafff000 - 00000000cb000000 (usable) >>> BIOS: 00000000cb800000 - 00000000cfa00000 (reserved) >>> BIOS: 00000000fec00000 - 00000000fec01000 (reserved) >>> BIOS: 00000000fed1c000 - 00000000fed20000 (reserved) >>> BIOS: 00000000fee00000 - 00000000fee01000 (reserved) >>> BIOS: 00000000ffc00000 - 00000000ffc20000 (reserved) >>> BIOS: 0000000100000000 - 000000022e000000 (usable) >>> Xen-provided physical RAM map: >>> Xen: 0000000000000000 - 000000002f800000 (usable) >>> DMI 2.6 present. >>> last_pfn = 0x2f800 max_arch_pfn = 0x10000000 >>> initial memory mapped : 0 - 00000000 >>> init_memory_mapping: 0000000000000000-000000002f800000 >>> NX (Execute Disable) protection: active >>> 0000000000 - 002f800000 page 4k >>> kernel direct mapping tables up to 2f800000 @ e4e000-fcf000 >>> RAMDISK: 005f9000 - 00d80e00 >>> ACPI: RSDP 000fe300 00024 (v02 DELL ) >>> ACPI: XSDT caffde18 0007C (v01 DELL CBX3 06222004 MSFT 00010013) >>> ACPI: FACP caf87d98 000F4 (v04 DELL CBX3 06222004 MSFT 00010013) >>> ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20090903/tbfadt-369) >>> ACPI Warning: 32/64X FACS address mismatch in FADT - CAFE4E40/00000000CAFE4D40, using 32 (20090903/tbfadt-486) >>> ACPI: DSDT caf55018 087F6 (v02 INT430 SYSFexxx 00001001 INTL 20090903) >>> ACPI: FACS cafe4e40 00040 >>> ACPI: APIC caffcf18 000CC (v02 DELL CBX3 06222004 MSFT 00010013) >>> ACPI: TCPA cafe5d18 00032 (v02 00000000 00000000) >>> ACPI: SSDT caf88a98 002F9 (v01 DELLTP TPM 00003000 INTL 20090903) >>> ACPI: MCFG cafe5c98 0003C (v01 DELL SNDYBRDG 06222004 MSFT 00000097) >>> ACPI: HPET cafe5c18 00038 (v01 A M I PCHHPET 06222004 AMI. 00000003) >>> ACPI: BOOT cafe5b98 00028 (v01 DELL CBX3 06222004 AMI 00010013) >>> ACPI: SSDT caf6c018 00888 (v01 PmRef Cpu0Ist 00003000 INTL 20090903) >>> ACPI: SSDT caf6b018 00996 (v01 PmRef CpuPm 00003000 INTL 20090903) >>> ACPI: XMAR caf87c18 000E8 (v01 INTEL SNB 00000001 INTL 00000001) >>> ACPI: SLIC caf75c18 00176 (v03 DELL CBX3 06222004 MSFT 00010013) >>> 0MB HIGHMEM available. >>> 760MB LOWMEM available. >>> mapped low ram: 0 - 2f800000 >>> low ram: 0 - 2f800000 >>> node 0 low ram: 00000000 - 2f000000 >>> node 0 bootmap 00000000 - 00005e00 >>> (5 early reservations) ==> bootmem [0000000000 - 002f000000] >>> #0 [0000100000 - 00005d8284] TEXT DATA BSS ==> [0000100000 - 00005d8284] >>> #1 [00005f9000 - 0000e4e000] Xen provided ==> [00005f9000 - 0000e4e000] >>> #2 [00005d9000 - 00005d91b3] BRK ==> [00005d9000 - 00005d91b3] >>> #3 [0000e4e000 - 0000fc4000] PGTABLE ==> [0000e4e000 - 0000fc4000] >>> #4 [0000000000 - 0000006000] BOOTMAP ==> [0000000000 - 0000006000] >>> found SMP MP-table at [ff3eca70] 000f1a70 >>> Zone PFN ranges: >>> DMA 0x00000000 -> 0x00001000 >>> Normal 0x00001000 -> 0x0002f800 >>> HighMem 0x0002f800 -> 0x0002f800 >>> Movable zone start PFN for each node >>> early_node_map[2] active PFN ranges >>> 0: 0x00000000 -> 0x0002f000 >>> 0: 0x0002f800 -> 0x0002f800 >>> On node 0 totalpages: 192512 >>> free_area_init_node: node 0, pgdat c04ef300, node_mem_map c1002000 >>> DMA zone: 32 pages used for memmap >>> DMA zone: 0 pages reserved >>> DMA zone: 4064 pages, LIFO batch:0 >>> Normal zone: 1488 pages used for memmap >>> Normal zone: 186928 pages, LIFO batch:31 >>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >>> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) >>> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) >>> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) >>> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled) >>> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled) >>> ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled) >>> ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled) >>> ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled) >>> ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled) >>> ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled) >>> ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled) >>> ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled) >>> ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled) >>> ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled) >>> ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled) >>> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) >>> IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 >>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >>> ACPI: IRQ0 used by override. >>> ACPI: IRQ2 used by override. >>> ACPI: IRQ9 used by override. >>> Using ACPI (MADT) for SMP configuration information >>> Allocating PCI resources starting at cfa00000 (gap: cfa00000:2f200000) >>> NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 >>> PERCPU: Embedded 9 pages/cpu @c16b9000 s13720 r0 d23144 u65536 >>> pcpu-alloc: s13720 r0 d23144 u65536 alloc=16*4096 >>> pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 >>> Swapping MFNs for PFN 544 and 16bb (MFN c9544 and c9f33) >>> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 190992 >>> Kernel command line: root=LABEL=root-hwkkxaxy ro xencons=hvc console=hvc0 console=tty0 quiet vga=785 splash >>> PID hash table entries: 4096 (order: 2, 16384 bytes) >>> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) >>> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) >>> Enabling fast FPU save and restore... done. >>> Enabling unmasked SIMD FPU exception support... done. >>> Initializing CPU#0 >>> Software IO TLB enabled: >>> Aperture: 64 megabytes >>> Address size: 28 bits >>> Kernel range: c17b2000 - c57b2000 >>> PCI-DMA: Using software bounce buffering for IO (SWIOTLB) >>> Initializing HighMem for node 0 (00000000:00000000) >>> Memory: 681820k/778240k available (2591k kernel code, 88012k reserved, 1466k data, 316k init, 0k highmem) >>> virtual kernel memory layout: >>> fixmap : 0xff077000 - 0xff3ff000 (3616 kB) >>> pkmap : 0xfec00000 - 0xfee00000 (2048 kB) >>> vmalloc : 0xf0000000 - 0xfebfe000 ( 235 MB) >>> lowmem : 0xc0000000 - 0xef800000 ( 760 MB) >>> .init : 0xc04f7000 - 0xc0546000 ( 316 kB) >>> .data : 0xc0387d67 - 0xc04f66f8 (1466 kB) >>> .text : 0xc0100000 - 0xc0387d67 (2591 kB) >>> Checking if this processor honours the WP bit even in supervisor mode...Ok. >>> Hierarchical RCU implementation. >>> NR_IRQS:2048 >>> Extended CMOS year: 2000 >>> Xen reported: 2793.780 MHz processor. >>> Console: colour dummy device 80x25 >>> console [tty0] enabled >>> console [hvc0] enabled >>> Calibrating delay using timer specific routine.. 5616.72 BogoMIPS (lpj=28083614) >>> pid_max: default: 32768 minimum: 301 >>> Security Framework initialized >>> Mount-cache hash table entries: 512 >>> mce: CPU supports 7 MCE banks >>> Checking 'hlt' instruction... OK. >>> SMP alternatives: switching to UP code >>> ACPI: Core revision 20090903 >>> SMP alternatives: switching to SMP code >>> Initializing CPU#1 >>> Initializing CPU#2 >>> Brought up 4 CPUs >>> Initializing CPU#3 >>> Grant table version 2 >>> NET: Registered protocol family 16 >>> ACPI FADT declares the system doesn't support PCIe ASPM, so disable it >>> ACPI: bus type pci registered >>> PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 >>> PCI: Not using MMCONFIG. >>> PCI: Using configuration type 1 for base access >>> bio: create slab <bio-0> at 0 >>> ACPI: EC: Look up EC in DSDT >>> ACPI: BIOS _OSI(Linux) query ignored >>> ACPI: BIOS _OSI(Linux) query ignored >>> ACPI: Interpreter enabled >>> ACPI: (supports S0 S5) >>> ACPI: Using IOAPIC for interrupt routing >>> PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 >>> PCI: MCFG area at f8000000 reserved in ACPI motherboard resources >>> PCI: Using MMCONFIG for extended config space >>> ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930 >>> ACPI: No dock devices found. >>> PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug >>> _OSC invalid UUID >>> ACPI: PCI Root Bridge [PCI0] (0000:00) >>> pci 0000:00:02.0: reg 10 64bit mmio: [0xe1400000-0xe17fffff] >>> pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff] >>> pci 0000:00:02.0: reg 20 io port: [0x4000-0x403f] >>> pci 0000:00:16.0: reg 10 64bit mmio: [0xe2eb0000-0xe2eb000f] >>> pci 0000:00:16.0: PME# supported from D0 D3hot D3cold >>> pci 0000:00:16.0: PME# disabled >>> pci 0000:00:16.3: reg 10 io port: [0x40e0-0x40e7] >>> pci 0000:00:16.3: reg 14 32bit mmio: [0xe2e90000-0xe2e90fff] >>> pci 0000:00:19.0: reg 10 32bit mmio: [0xe2e00000-0xe2e1ffff] >>> pci 0000:00:19.0: reg 14 32bit mmio: [0xe2e80000-0xe2e80fff] >>> pci 0000:00:19.0: reg 18 io port: [0x4080-0x409f] >>> pci 0000:00:19.0: PME# supported from D0 D3hot D3cold >>> pci 0000:00:19.0: PME# disabled >>> pci 0000:00:1a.0: reg 10 32bit mmio: [0xe2e70000-0xe2e703ff] >>> pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold >>> pci 0000:00:1a.0: PME# disabled >>> pci 0000:00:1b.0: reg 10 64bit mmio: [0xe2e60000-0xe2e63fff] >>> pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold >>> pci 0000:00:1b.0: PME# disabled >>> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold >>> pci 0000:00:1c.0: PME# disabled >>> pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold >>> pci 0000:00:1c.1: PME# disabled >>> pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold >>> pci 0000:00:1c.2: PME# disabled >>> pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold >>> pci 0000:00:1c.3: PME# disabled >>> pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold >>> pci 0000:00:1c.5: PME# disabled >>> pci 0000:00:1d.0: reg 10 32bit mmio: [0xe2e50000-0xe2e503ff] >>> pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold >>> pci 0000:00:1d.0: PME# disabled >>> pci 0000:00:1f.2: reg 10 io port: [0x40d0-0x40d7] >>> pci 0000:00:1f.2: reg 14 io port: [0x40c0-0x40c3] >>> pci 0000:00:1f.2: reg 18 io port: [0x40b0-0x40b7] >>> pci 0000:00:1f.2: reg 1c io port: [0x40a0-0x40a3] >>> pci 0000:00:1f.2: reg 20 io port: [0x4060-0x407f] >>> pci 0000:00:1f.2: reg 24 32bit mmio: [0xe2e40000-0xe2e407ff] >>> pci 0000:00:1f.2: PME# supported from D3hot >>> pci 0000:00:1f.2: PME# disabled >>> pci 0000:00:1f.3: reg 10 64bit mmio: [0xe2e30000-0xe2e300ff] >>> pci 0000:00:1f.3: reg 20 io port: [0x4040-0x405f] >>> pci 0000:00:1c.0: PCI bridge to [bus 01-01] >>> pci 0000:02:00.0: reg 10 64bit mmio: [0xe2d00000-0xe2d01fff] >>> pci 0000:02:00.0: PME# supported from D0 D3hot D3cold >>> pci 0000:02:00.0: PME# disabled >>> pci 0000:00:1c.1: PCI bridge to [bus 02-02] >>> pci 0000:00:1c.1: bridge 32bit mmio: [0xe2d00000-0xe2dfffff] >>> pci 0000:00:1c.2: PCI bridge to [bus 03-08] >>> pci 0000:00:1c.2: bridge io port: [0x3000-0x3fff] >>> pci 0000:00:1c.2: bridge 32bit mmio: [0xe2200000-0xe2bfffff] >>> pci 0000:00:1c.2: bridge 64bit mmio pref: [0xe0a00000-0xe13fffff] >>> pci 0000:00:1c.3: PCI bridge to [bus 09-09] >>> pci 0000:00:1c.3: bridge io port: [0x2000-0x2fff] >>> pci 0000:00:1c.3: bridge 32bit mmio: [0xe1800000-0xe21fffff] >>> pci 0000:00:1c.3: bridge 64bit mmio pref: [0xe0000000-0xe09fffff] >>> pci 0000:0a:00.0: reg 10 32bit mmio: [0xe2c20000-0xe2c201ff] >>> pci 0000:0a:00.0: supports D1 D2 >>> pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold >>> pci 0000:0a:00.0: PME# disabled >>> pci 0000:0a:00.1: reg 10 32bit mmio: [0xe2c10000-0xe2c10fff] >>> pci 0000:0a:00.1: reg 18 32bit mmio: [0xe2c00000-0xe2c007ff] >>> pci 0000:0a:00.1: supports D1 D2 >>> pci 0000:0a:00.1: PME# supported from D0 D1 D2 D3hot D3cold >>> pci 0000:0a:00.1: PME# disabled >>> pci 0000:00:1c.5: PCI bridge to [bus 0a-0a] >>> pci 0000:00:1c.5: bridge 32bit mmio: [0xe2c00000-0xe2cfffff] >>> pci_bus 0000:00: on NUMA node 0 >>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] >>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] >>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] >>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] >>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] >>> _OSC invalid UUID >>> ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 >>> ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 >>> ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 >>> ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 >>> ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15) >>> ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. >>> ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15) >>> ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. >>> xen_mem: Initialising balloon driver. >>> vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none >>> vgaarb: loaded >>> PCI: Using ACPI for IRQ routing >>> Switching to clocksource xen >>> pnp: PnP ACPI init >>> ACPI: bus type pnp registered >>> pnp: PnP ACPI: found 13 devices >>> ACPI: ACPI bus type pnp unregistered >>> system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved >>> system 00:05: ioport range 0x680-0x69f has been reserved >>> system 00:05: ioport range 0x1000-0x100f has been reserved >>> system 00:05: ioport range 0xffff-0xffff has been reserved >>> system 00:05: ioport range 0xffff-0xffff has been reserved >>> system 00:05: ioport range 0x400-0x47f has been reserved >>> system 00:05: ioport range 0x500-0x57f has been reserved >>> system 00:05: ioport range 0x164e-0x164f has been reserved >>> system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved >>> system 00:0a: iomem range 0xfed10000-0xfed17fff has been reserved >>> system 00:0a: iomem range 0xfed18000-0xfed18fff has been reserved >>> system 00:0a: iomem range 0xfed19000-0xfed19fff has been reserved >>> system 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved >>> system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved >>> system 00:0a: iomem range 0xfed90000-0xfed93fff has been reserved >>> system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved >>> system 00:0a: iomem range 0xff000000-0xffffffff could not be reserved >>> system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved >>> system 00:0c: iomem range 0x20000000-0x201fffff has been reserved >>> system 00:0c: iomem range 0x40000000-0x401fffff has been reserved >>> pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 >>> pci 0000:00:1c.0: IO window: disabled >>> pci 0000:00:1c.0: MEM window: disabled >>> pci 0000:00:1c.0: PREFETCH window: disabled >>> pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 >>> pci 0000:00:1c.1: IO window: disabled >>> pci 0000:00:1c.1: MEM window: 0xe2d00000-0xe2dfffff >>> pci 0000:00:1c.1: PREFETCH window: disabled >>> pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 >>> pci 0000:00:1c.2: IO window: 0x3000-0x3fff >>> pci 0000:00:1c.2: MEM window: 0xe2200000-0xe2bfffff >>> pci 0000:00:1c.2: PREFETCH window: 0x000000e0a00000-0x000000e13fffff >>> pci 0000:00:1c.3: PCI bridge, secondary bus 0000:09 >>> pci 0000:00:1c.3: IO window: 0x2000-0x2fff >>> pci 0000:00:1c.3: MEM window: 0xe1800000-0xe21fffff >>> pci 0000:00:1c.3: PREFETCH window: 0x000000e0000000-0x000000e09fffff >>> pci 0000:00:1c.5: PCI bridge, secondary bus 0000:0a >>> pci 0000:00:1c.5: IO window: disabled >>> pci 0000:00:1c.5: MEM window: 0xe2c00000-0xe2cfffff >>> pci 0000:00:1c.5: PREFETCH window: disabled >>> pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >>> pci 0000:00:1c.0: setting latency timer to 64 >>> pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 >>> pci 0000:00:1c.1: setting latency timer to 64 >>> pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >>> pci 0000:00:1c.2: setting latency timer to 64 >>> pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 >>> pci 0000:00:1c.3: setting latency timer to 64 >>> pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 >>> pci 0000:00:1c.5: setting latency timer to 64 >>> pci_bus 0000:00: resource 0 io: [0x00-0xffff] >>> pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] >>> pci_bus 0000:02: resource 1 mem: [0xe2d00000-0xe2dfffff] >>> pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] >>> pci_bus 0000:03: resource 1 mem: [0xe2200000-0xe2bfffff] >>> pci_bus 0000:03: resource 2 pref mem [0xe0a00000-0xe13fffff] >>> pci_bus 0000:09: resource 0 io: [0x2000-0x2fff] >>> pci_bus 0000:09: resource 1 mem: [0xe1800000-0xe21fffff] >>> pci_bus 0000:09: resource 2 pref mem [0xe0000000-0xe09fffff] >>> pci_bus 0000:0a: resource 1 mem: [0xe2c00000-0xe2cfffff] >>> NET: Registered protocol family 2 >>> IP route cache hash table entries: 32768 (order: 5, 131072 bytes) >>> TCP established hash table entries: 131072 (order: 8, 1048576 bytes) >>> TCP bind hash table entries: 65536 (order: 7, 524288 bytes) >>> TCP: Hash tables configured (established 131072 bind 65536) >>> TCP reno registered >>> NET: Registered protocol family 1 >>> pci 0000:00:02.0: Boot video device >>> Trying to unpack rootfs image as initramfs... >>> Freeing initrd memory: 7711k freed >>> Simple Boot Flag at 0xf3 set to 0x1 >>> MCE: bind virq for DOM0 logging >>> MCE_DOM0_LOG: enter dom0 mce vIRQ handler >>> MCE_DOM0_LOG: No more urgent data >>> MCE_DOM0_LOG: No more nonurgent data >>> VFS: Disk quotas dquot_6.5.2 >>> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) >>> msgmni has been set to 379 >>> alg: No test for stdrng (krng) >>> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) >>> io scheduler noop registered >>> io scheduler anticipatory registered >>> io scheduler deadline registered >>> io scheduler cfq registered (default) >>> vesafb: framebuffer at 0xd0000000, mapped to 0xf0080000, using 1200k, total 65472k >>> vesafb: mode is 640x480x16, linelength=1280, pages=0 >>> vesafb: scrolling: redraw >>> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 >>> fb0: VESA VGA frame buffer device >>> floppy0: Unable to grab DMA2 for the floppy driver >>> floppy0: no floppy controllers found >>> brd: module loaded >>> loop: module loaded >>> Xen virtual console successfully installed as hvc0 >>> Event-channel device installed. >>> blktap_device_init: blktap device major 253 >>> blktap_ring_init: blktap ring major: 253 >>> netfront: Initialising virtual ethernet driver. >>> Uniform Multi-Platform E-IDE driver >>> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 >>> i8042.c: Warning: Keylock active. >>> serio: i8042 KBD port at 0x60,0x64 irq 1 >>> serio: i8042 AUX port at 0x60,0x64 irq 12 >>> mice: PS/2 mouse device common for all mice >>> NET: Registered protocol family 17 >>> registered taskstats version 1 >>> input: AT Translated Set 2 keyboard as /class/input/input0 >>> PCI IO multiplexer device installed. >>> BIOS EDD facility v0.16 2004-Jun-25, 1 devices found >>> Freeing unused kernel memory: 316k freed >>> Console: switching to colour frame buffer device 80x30 >>> usbcore: registered new interface driver usbfs >>> usbcore: registered new interface driver hub >>> usbcore: registered new device driver usb >>> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver >>> ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >>> ehci_hcd 0000:00:1a.0: setting latency timer to 64 >>> ehci_hcd 0000:00:1a.0: EHCI Host Controller >>> ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 >>> ehci_hcd 0000:00:1a.0: debug port 2 >>> ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported >>> ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe2e70000 >>> ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 >>> usb usb1: configuration #1 chosen from 1 choice >>> hub 1-0:1.0: USB hub found >>> hub 1-0:1.0: 3 ports detected >>> ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>> ehci_hcd 0000:00:1d.0: setting latency timer to 64 >>> ehci_hcd 0000:00:1d.0: EHCI Host Controller >>> ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 >>> ehci_hcd 0000:00:1d.0: debug port 2 >>> ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported >>> ehci_hcd 0000:00:1d.0: irq 17, io mem 0xe2e50000 >>> ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 >>> usb usb2: configuration #1 chosen from 1 choice >>> hub 2-0:1.0: USB hub found >>> hub 2-0:1.0: 3 ports detected >>> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver >>> uhci_hcd: USB Universal Host Controller Interface driver >>> SCSI subsystem initialized >>> libata version 3.00 loaded. >>> ahci 0000:00:1f.2: version 3.0 >>> ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >>> ahci 0000:00:1f.2: irq 1279 (279) for MSI/MSI-X >>> ahci: SSS flag set, parallel bus scan disabled >>> ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode >>> ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst >>> ahci 0000:00:1f.2: setting latency timer to 64 >>> scsi0 : ahci >>> scsi1 : ahci >>> scsi2 : ahci >>> scsi3 : ahci >>> scsi4 : ahci >>> scsi5 : ahci >>> ata1: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40100 irq 1279 >>> ata2: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40180 irq 1279 >>> ata3: DUMMY >>> ata4: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40280 irq 1279 >>> ata5: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40300 irq 1279 >>> ata6: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40380 irq 1279 >>> input: PS/2 Generic Mouse as /class/input/input1 >>> usb 1-1: new high speed USB device using ehci_hcd and address 2 >>> usb 1-1: configuration #1 chosen from 1 choice >>> hub 1-1:1.0: USB hub found >>> hub 1-1:1.0: 6 ports detected >>> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >>> usb 2-1: new high speed USB device using ehci_hcd and address 2 >>> ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) >>> ata1.00: ATA-8: ST9500423AS, 0002DEM1, max UDMA/133 >>> ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) >>> ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) >>> ata1.00: configured for UDMA/133 >>> scsi 0:0:0:0: Direct-Access ATA ST9500423AS 0002 PQ: 0 ANSI: 5 >>> sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) >>> sd 0:0:0:0: [sda] 4096-byte physical blocks >>> sd 0:0:0:0: [sda] Write Protect is off >>> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >>> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >>> sda: sda1 sda2 sda3 >>> sd 0:0:0:0: [sda] Attached SCSI disk >>> usb 2-1: configuration #1 chosen from 1 choice >>> hub 2-1:1.0: USB hub found >>> hub 2-1:1.0: 8 ports detected >>> usb 1-1.4: new full speed USB device using ehci_hcd and address 3 >>> usb 1-1.4: configuration #1 chosen from 1 choice >>> usb 1-1.5: new high speed USB device using ehci_hcd and address 4 >>> usb 1-1.5: configuration #1 chosen from 1 choice >>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >>> ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU60N, A102, max UDMA/133, ATAPI AN >>> ata2.00: configured for UDMA/133 >>> scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GU60N A102 PQ: 0 ANSI: 5 >>> usb 2-1.8: new full speed USB device using ehci_hcd and address 3 >>> usb 2-1.8: configuration #0 chosen from 1 choice >>> usb 2-1.8: config 0 descriptor?? >>> ata4: SATA link down (SStatus 0 SControl 300) >>> ata5: SATA link down (SStatus 0 SControl 300) >>> ata6: SATA link down (SStatus 0 SControl 300) >>> device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com >>> kjournald starting. Commit interval 15 seconds >>> EXT3-fs: mounted filesystem with ordered data mode. >>> input: PC Speaker as /class/input/input2 >>> Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled >>> serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 >>> 0000:00:16.3: ttyS0 at I/O 0x40e0 (irq = 17) is a 16550A >>> e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-NAPI >>> e1000e: Copyright(c) 1999 - 2010 Intel Corporation. >>> e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 >>> e1000e 0000:00:19.0: setting latency timer to 64 >>> e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X >>> rtc_cmos 00:06: RTC can wake from S4 >>> rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 >>> rtc0: alarms up to one year, y3k, 242 bytes nvram >>> parport_pc 00:08: activated >>> parport_pc 00:08: reported by Plug and Play ACPI >>> parport_pc 00:08: disabled >>> e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) d4:be:d9:0f:d0:6c >>> e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection >>> e1000e 0000:00:19.0: eth0: MAC: 11, PHY: 11, PBA No: 3041FF-0FF >>> i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >>> ACPI: I/O resource 0000:00:1f.3 [0x4040-0x405f] conflicts with ACPI region SMBI [0x4040-0x404f] >>> ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver >>> ACPI: SSDT cadd7798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903) >>> ACPI: SSDT cadd8a98 00303 (v01 PmRef ApIst 00003000 INTL 20090903) >>> ACPI: SSDT cadd6d98 00119 (v01 PmRef ApCst 00003000 INTL 20090903) >>> input: Lid Switch as /class/input/input3 >>> ACPI: Lid Switch [LID] >>> input: Power Button as /class/input/input4 >>> ACPI: Power Button [PBTN] >>> input: Sleep Button as /class/input/input5 >>> ACPI: Sleep Button [SBTN] >>> input: Power Button as /class/input/input6 >>> ACPI: Power Button [PWRF] >>> thermal LNXTHERM:01: registered as thermal_zone0 >>> ACPI: Thermal Zone [THM] (25 C) >>> sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray >>> Uniform CD-ROM driver Revision: 3.20 >>> sr 1:0:0:0: Attached scsi CD-ROM sr0 >>> Compat-wireless backport release: compat-wireless-v3.4-rc1-2 >>> Backport based on linux-stable.git v3.4-rc1 >>> cfg80211: Calling CRDA to update world regulatory domain >>> ACPI: AC Adapter [AC] (on-line) >>> sd 0:0:0:0: Attached scsi generic sg0 type 0 >>> sr 1:0:0:0: Attached scsi generic sg1 type 5 >>> ACPI: Battery Slot [BAT0] (battery present) >>> ACPI: Battery Slot [BAT1] (battery absent) >>> ACPI: Battery Slot [BAT2] (battery absent) >>> Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: >>> Copyright(c) 2003-2012 Intel Corporation >>> iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>> iwlwifi 0000:02:00.0: setting latency timer to 64 >>> iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 >>> iwlwifi 0000:02:00.0: pci_resource_base = f2478000 >>> iwlwifi 0000:02:00.0: HW Revision ID = 0x34 >>> iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X >>> acpi device:37: registered as cooling_device8 >>> input: Video Bus as /class/input/input7 >>> ACPI: Video Device [VID] (multi-head: yes rom: no post: no) >>> Non-volatile memory driver v1.3 >>> lp: driver loaded but no devices found >>> md: Autodetecting RAID arrays. >>> md: Scanned 0 and added 0 devices. >>> md: autorun ... >>> md: ... autorun DONE. >>> EXT3 FS on sda1, internal journal >>> ISO 9660 Extensions: Microsoft Joliet Level 3 >>> ISO 9660 Extensions: RRIP_1991A >>> Adding 524280k swap on /var/swap/swap.001. Priority:-1 extents:137 across:637248k >>> Microcode Update Driver: v2.00-xen <tigran@aivazian.fsnet.co.uk>, Peter Oruba >>> Microcode Update Driver: v2.00-xen removed. >>> ip_tables: (C) 2000-2006 Netfilter Core Team >>> nf_conntrack version 0.5.0 (12157 buckets, 48628 max) >>> e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X >>> e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X >>> 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> >>> All bugs added by David S. Miller <davem@redhat.com> >>> device xenbr0 entered promiscuous mode >>> device eth0 entered promiscuous mode >>> e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX >>> e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO >>> RPC: Registered udp transport module. >>> RPC: Registered tcp transport module. >>> RPC: Registered tcp NFSv4.1 backchannel transport module. >>> warning: `ntpdate' uses 32-bit capabilities (legacy support in use) >>> suspend: event channel 38 >>> kjournald starting. Commit interval 15 seconds >>> EXT3 FS on dm-0, internal journal >>> EXT3-fs: mounted filesystem with ordered data mode. >>> iwlwifi 0000:02:00.0: ea4b7e1c >>> iwlwifi 0000:02:00.0: ca253e1c >>> iwlwifi 0000:02:00.0: ca253de8 >>> iwlwifi 0000:02:00.0: PCI INT A disabled >>> >>> >> >> Ok, can you please set all the debug flags. Since nothing happens here >> we shouldn't' see that many debug prints: >> >> modprobe iwlwifi debug=0xffffffff >> ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-18 19:33 ` Emmanuel Grumbach @ 2012-04-18 21:17 ` Dominik Feser 2012-04-19 5:03 ` Emmanuel Grumbach 2012-04-19 7:25 ` Dominik Feser 1 sibling, 1 reply; 48+ messages in thread From: Dominik Feser @ 2012-04-18 21:17 UTC (permalink / raw) To: Emmanuel Grumbach Cc: Dominik Feser, Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy One thing I just remembered: I had problems compiling the code and because of that commented some lines in the code out: # make ./scripts/gen-compat-autoconf.sh /root/compat-wireless-3.4-rc1-2/.config /root/compat-wireless-3.4-rc1-2/config.mk > include/linux/compat_autoconf.h make -C /lib/modules/2.6.32.12-0.7.1/build M=/root/compat-wireless-3.4-rc1-2 modules make[1]: Entering directory `/mnt/src/redhat/BUILD/kernel-2.6.32.120.7.1' Updating /root/compat-wireless-3.4-rc1-2/Makefile.xen CC [M] /root/compat-wireless-3.4-rc1-2/compat/main.o In file included from include/net/dst.h:13, from include/net/sock.h:61, from /root/compat-wireless-3.4-rc1-2/include/linux/compat-2.6.35.h:8, from /root/compat-wireless-3.4-rc1-2/include/linux/compat-2.6.h:55, from <Kommandozeile>:1: include/linux/rtnetlink.h:785: Fehler: Redefinition von »rcu_read_lock_held« /root/compat-wireless-3.4-rc1-2/include/linux/compat-2.6.34.h:291: Fehler: Vorherige Definition von »rcu_read_lock_held« war hier make[3]: *** [/root/compat-wireless-3.4-rc1-2/compat/main.o] Fehler 1 make[2]: *** [/root/compat-wireless-3.4-rc1-2/compat] Fehler 2 make[1]: *** [_module_/root/compat-wireless-3.4-rc1-2] Fehler 2 make[1]: Leaving directory `/mnt/src/redhat/BUILD/kernel-2.6.32.120.7.1' make: *** [modules] Fehler 2 I made a change to the file /root/compat-wireless-3.4-rc1-2/include/linux/compat-2.6.34.h line 291 and commented the following lines out: before: static inline int rcu_read_lock_held(void) { return 1; } after: /* static inline int rcu_read_lock_held(void) { return 1; } */ Might that cause the problem? How can I get rid of this error?? Am 18.04.2012 um 21:33 schrieb Emmanuel Grumbach: > On Wed, Apr 18, 2012 at 22:28, Dominik Feser > <dominik.feser@googlemail.com> wrote: >> Thumb question but how do I compile the driver with debug support? I think its missing... >> In which file do I have to enable the debug stuff? >> >> # modprobe iwlwifi debug=0xffffffff >> FATAL: Error inserting iwlwifi (/lib/modules/2.6.32.12-0.7.1/updates/drivers/net/wireless/iwlwifi/iwlwifi.ko): Unknown symbol in module, or unknown parameter (see dmesg) >> >> > > You need to enable CONFIG_IWLWIFI_DEBUG in your .config file. > >> >> Am 18.04.2012 um 21:25 schrieb Emmanuel Grumbach: >> >>> On Wed, Apr 18, 2012 at 19:56, Dominik Feser >>> <dominik.feser@googlemail.com> wrote: >>>> OK, that was the firmware I had tried before. I deleted it because it did not work, too. >>>> >>>> Here is the output you wanted: >>>> # ls /lib/firmware/iwlwifi-6000* >>>> /lib/firmware/iwlwifi-6000g2a-5.ucode >>>> >>>> After copying the firmware there again and rebooting dmesg looks like this: >>>> # dmesg | grep iwl >>>> iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>>> iwlwifi 0000:02:00.0: setting latency timer to 64 >>>> iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 >>>> iwlwifi 0000:02:00.0: pci_resource_base = f2478000 >>>> iwlwifi 0000:02:00.0: HW Revision ID = 0x34 >>>> iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X >>>> iwlwifi 0000:02:00.0: ea4b7e1c >>>> >>>> Still no wlan0 for me... >>>> >>>> Full dmesg: >>>> # dmesg >>>> Reserving virtual address space above 0xff400000 >>>> Linux version 2.6.32.12-0.7.1 (geeko@buildhost) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #6 SMP Mon Apr 16 19:31:06 EDT 2012 >>>> KERNEL supported cpus: >>>> Intel GenuineIntel >>>> AMD AuthenticAMD >>>> NSC Geode by NSC >>>> Cyrix CyrixInstead >>>> Centaur CentaurHauls >>>> Transmeta GenuineTMx86 >>>> Transmeta TransmetaCPU >>>> Xen-provided machine memory map: >>>> BIOS: 0000000000000000 - 000000000009a800 (usable) >>>> BIOS: 000000000009a800 - 00000000000a0000 (reserved) >>>> BIOS: 00000000000e0000 - 0000000000100000 (reserved) >>>> BIOS: 0000000000100000 - 0000000020000000 (usable) >>>> BIOS: 0000000020000000 - 0000000020200000 (reserved) >>>> BIOS: 0000000020200000 - 0000000040000000 (usable) >>>> BIOS: 0000000040000000 - 0000000040200000 (reserved) >>>> BIOS: 0000000040200000 - 00000000caa25000 (usable) >>>> BIOS: 00000000caa25000 - 00000000caa69000 (reserved) >>>> BIOS: 00000000caa69000 - 00000000cadb7000 (usable) >>>> BIOS: 00000000cadb7000 - 00000000cade7000 (reserved) >>>> BIOS: 00000000cade7000 - 00000000cafe7000 (ACPI NVS) >>>> BIOS: 00000000cafe7000 - 00000000cafff000 (ACPI data) >>>> BIOS: 00000000cafff000 - 00000000cb000000 (usable) >>>> BIOS: 00000000cb800000 - 00000000cfa00000 (reserved) >>>> BIOS: 00000000fec00000 - 00000000fec01000 (reserved) >>>> BIOS: 00000000fed1c000 - 00000000fed20000 (reserved) >>>> BIOS: 00000000fee00000 - 00000000fee01000 (reserved) >>>> BIOS: 00000000ffc00000 - 00000000ffc20000 (reserved) >>>> BIOS: 0000000100000000 - 000000022e000000 (usable) >>>> Xen-provided physical RAM map: >>>> Xen: 0000000000000000 - 000000002f800000 (usable) >>>> DMI 2.6 present. >>>> last_pfn = 0x2f800 max_arch_pfn = 0x10000000 >>>> initial memory mapped : 0 - 00000000 >>>> init_memory_mapping: 0000000000000000-000000002f800000 >>>> NX (Execute Disable) protection: active >>>> 0000000000 - 002f800000 page 4k >>>> kernel direct mapping tables up to 2f800000 @ e4e000-fcf000 >>>> RAMDISK: 005f9000 - 00d80e00 >>>> ACPI: RSDP 000fe300 00024 (v02 DELL ) >>>> ACPI: XSDT caffde18 0007C (v01 DELL CBX3 06222004 MSFT 00010013) >>>> ACPI: FACP caf87d98 000F4 (v04 DELL CBX3 06222004 MSFT 00010013) >>>> ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20090903/tbfadt-369) >>>> ACPI Warning: 32/64X FACS address mismatch in FADT - CAFE4E40/00000000CAFE4D40, using 32 (20090903/tbfadt-486) >>>> ACPI: DSDT caf55018 087F6 (v02 INT430 SYSFexxx 00001001 INTL 20090903) >>>> ACPI: FACS cafe4e40 00040 >>>> ACPI: APIC caffcf18 000CC (v02 DELL CBX3 06222004 MSFT 00010013) >>>> ACPI: TCPA cafe5d18 00032 (v02 00000000 00000000) >>>> ACPI: SSDT caf88a98 002F9 (v01 DELLTP TPM 00003000 INTL 20090903) >>>> ACPI: MCFG cafe5c98 0003C (v01 DELL SNDYBRDG 06222004 MSFT 00000097) >>>> ACPI: HPET cafe5c18 00038 (v01 A M I PCHHPET 06222004 AMI. 00000003) >>>> ACPI: BOOT cafe5b98 00028 (v01 DELL CBX3 06222004 AMI 00010013) >>>> ACPI: SSDT caf6c018 00888 (v01 PmRef Cpu0Ist 00003000 INTL 20090903) >>>> ACPI: SSDT caf6b018 00996 (v01 PmRef CpuPm 00003000 INTL 20090903) >>>> ACPI: XMAR caf87c18 000E8 (v01 INTEL SNB 00000001 INTL 00000001) >>>> ACPI: SLIC caf75c18 00176 (v03 DELL CBX3 06222004 MSFT 00010013) >>>> 0MB HIGHMEM available. >>>> 760MB LOWMEM available. >>>> mapped low ram: 0 - 2f800000 >>>> low ram: 0 - 2f800000 >>>> node 0 low ram: 00000000 - 2f000000 >>>> node 0 bootmap 00000000 - 00005e00 >>>> (5 early reservations) ==> bootmem [0000000000 - 002f000000] >>>> #0 [0000100000 - 00005d8284] TEXT DATA BSS ==> [0000100000 - 00005d8284] >>>> #1 [00005f9000 - 0000e4e000] Xen provided ==> [00005f9000 - 0000e4e000] >>>> #2 [00005d9000 - 00005d91b3] BRK ==> [00005d9000 - 00005d91b3] >>>> #3 [0000e4e000 - 0000fc4000] PGTABLE ==> [0000e4e000 - 0000fc4000] >>>> #4 [0000000000 - 0000006000] BOOTMAP ==> [0000000000 - 0000006000] >>>> found SMP MP-table at [ff3eca70] 000f1a70 >>>> Zone PFN ranges: >>>> DMA 0x00000000 -> 0x00001000 >>>> Normal 0x00001000 -> 0x0002f800 >>>> HighMem 0x0002f800 -> 0x0002f800 >>>> Movable zone start PFN for each node >>>> early_node_map[2] active PFN ranges >>>> 0: 0x00000000 -> 0x0002f000 >>>> 0: 0x0002f800 -> 0x0002f800 >>>> On node 0 totalpages: 192512 >>>> free_area_init_node: node 0, pgdat c04ef300, node_mem_map c1002000 >>>> DMA zone: 32 pages used for memmap >>>> DMA zone: 0 pages reserved >>>> DMA zone: 4064 pages, LIFO batch:0 >>>> Normal zone: 1488 pages used for memmap >>>> Normal zone: 186928 pages, LIFO batch:31 >>>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >>>> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) >>>> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) >>>> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) >>>> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled) >>>> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled) >>>> ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled) >>>> ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled) >>>> ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled) >>>> ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled) >>>> ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled) >>>> ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled) >>>> ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled) >>>> ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled) >>>> ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled) >>>> ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled) >>>> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) >>>> IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 >>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >>>> ACPI: IRQ0 used by override. >>>> ACPI: IRQ2 used by override. >>>> ACPI: IRQ9 used by override. >>>> Using ACPI (MADT) for SMP configuration information >>>> Allocating PCI resources starting at cfa00000 (gap: cfa00000:2f200000) >>>> NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 >>>> PERCPU: Embedded 9 pages/cpu @c16b9000 s13720 r0 d23144 u65536 >>>> pcpu-alloc: s13720 r0 d23144 u65536 alloc=16*4096 >>>> pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 >>>> Swapping MFNs for PFN 544 and 16bb (MFN c9544 and c9f33) >>>> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 190992 >>>> Kernel command line: root=LABEL=root-hwkkxaxy ro xencons=hvc console=hvc0 console=tty0 quiet vga=785 splash >>>> PID hash table entries: 4096 (order: 2, 16384 bytes) >>>> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) >>>> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) >>>> Enabling fast FPU save and restore... done. >>>> Enabling unmasked SIMD FPU exception support... done. >>>> Initializing CPU#0 >>>> Software IO TLB enabled: >>>> Aperture: 64 megabytes >>>> Address size: 28 bits >>>> Kernel range: c17b2000 - c57b2000 >>>> PCI-DMA: Using software bounce buffering for IO (SWIOTLB) >>>> Initializing HighMem for node 0 (00000000:00000000) >>>> Memory: 681820k/778240k available (2591k kernel code, 88012k reserved, 1466k data, 316k init, 0k highmem) >>>> virtual kernel memory layout: >>>> fixmap : 0xff077000 - 0xff3ff000 (3616 kB) >>>> pkmap : 0xfec00000 - 0xfee00000 (2048 kB) >>>> vmalloc : 0xf0000000 - 0xfebfe000 ( 235 MB) >>>> lowmem : 0xc0000000 - 0xef800000 ( 760 MB) >>>> .init : 0xc04f7000 - 0xc0546000 ( 316 kB) >>>> .data : 0xc0387d67 - 0xc04f66f8 (1466 kB) >>>> .text : 0xc0100000 - 0xc0387d67 (2591 kB) >>>> Checking if this processor honours the WP bit even in supervisor mode...Ok. >>>> Hierarchical RCU implementation. >>>> NR_IRQS:2048 >>>> Extended CMOS year: 2000 >>>> Xen reported: 2793.780 MHz processor. >>>> Console: colour dummy device 80x25 >>>> console [tty0] enabled >>>> console [hvc0] enabled >>>> Calibrating delay using timer specific routine.. 5616.72 BogoMIPS (lpj=28083614) >>>> pid_max: default: 32768 minimum: 301 >>>> Security Framework initialized >>>> Mount-cache hash table entries: 512 >>>> mce: CPU supports 7 MCE banks >>>> Checking 'hlt' instruction... OK. >>>> SMP alternatives: switching to UP code >>>> ACPI: Core revision 20090903 >>>> SMP alternatives: switching to SMP code >>>> Initializing CPU#1 >>>> Initializing CPU#2 >>>> Brought up 4 CPUs >>>> Initializing CPU#3 >>>> Grant table version 2 >>>> NET: Registered protocol family 16 >>>> ACPI FADT declares the system doesn't support PCIe ASPM, so disable it >>>> ACPI: bus type pci registered >>>> PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 >>>> PCI: Not using MMCONFIG. >>>> PCI: Using configuration type 1 for base access >>>> bio: create slab <bio-0> at 0 >>>> ACPI: EC: Look up EC in DSDT >>>> ACPI: BIOS _OSI(Linux) query ignored >>>> ACPI: BIOS _OSI(Linux) query ignored >>>> ACPI: Interpreter enabled >>>> ACPI: (supports S0 S5) >>>> ACPI: Using IOAPIC for interrupt routing >>>> PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 >>>> PCI: MCFG area at f8000000 reserved in ACPI motherboard resources >>>> PCI: Using MMCONFIG for extended config space >>>> ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930 >>>> ACPI: No dock devices found. >>>> PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug >>>> _OSC invalid UUID >>>> ACPI: PCI Root Bridge [PCI0] (0000:00) >>>> pci 0000:00:02.0: reg 10 64bit mmio: [0xe1400000-0xe17fffff] >>>> pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff] >>>> pci 0000:00:02.0: reg 20 io port: [0x4000-0x403f] >>>> pci 0000:00:16.0: reg 10 64bit mmio: [0xe2eb0000-0xe2eb000f] >>>> pci 0000:00:16.0: PME# supported from D0 D3hot D3cold >>>> pci 0000:00:16.0: PME# disabled >>>> pci 0000:00:16.3: reg 10 io port: [0x40e0-0x40e7] >>>> pci 0000:00:16.3: reg 14 32bit mmio: [0xe2e90000-0xe2e90fff] >>>> pci 0000:00:19.0: reg 10 32bit mmio: [0xe2e00000-0xe2e1ffff] >>>> pci 0000:00:19.0: reg 14 32bit mmio: [0xe2e80000-0xe2e80fff] >>>> pci 0000:00:19.0: reg 18 io port: [0x4080-0x409f] >>>> pci 0000:00:19.0: PME# supported from D0 D3hot D3cold >>>> pci 0000:00:19.0: PME# disabled >>>> pci 0000:00:1a.0: reg 10 32bit mmio: [0xe2e70000-0xe2e703ff] >>>> pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold >>>> pci 0000:00:1a.0: PME# disabled >>>> pci 0000:00:1b.0: reg 10 64bit mmio: [0xe2e60000-0xe2e63fff] >>>> pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold >>>> pci 0000:00:1b.0: PME# disabled >>>> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold >>>> pci 0000:00:1c.0: PME# disabled >>>> pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold >>>> pci 0000:00:1c.1: PME# disabled >>>> pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold >>>> pci 0000:00:1c.2: PME# disabled >>>> pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold >>>> pci 0000:00:1c.3: PME# disabled >>>> pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold >>>> pci 0000:00:1c.5: PME# disabled >>>> pci 0000:00:1d.0: reg 10 32bit mmio: [0xe2e50000-0xe2e503ff] >>>> pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold >>>> pci 0000:00:1d.0: PME# disabled >>>> pci 0000:00:1f.2: reg 10 io port: [0x40d0-0x40d7] >>>> pci 0000:00:1f.2: reg 14 io port: [0x40c0-0x40c3] >>>> pci 0000:00:1f.2: reg 18 io port: [0x40b0-0x40b7] >>>> pci 0000:00:1f.2: reg 1c io port: [0x40a0-0x40a3] >>>> pci 0000:00:1f.2: reg 20 io port: [0x4060-0x407f] >>>> pci 0000:00:1f.2: reg 24 32bit mmio: [0xe2e40000-0xe2e407ff] >>>> pci 0000:00:1f.2: PME# supported from D3hot >>>> pci 0000:00:1f.2: PME# disabled >>>> pci 0000:00:1f.3: reg 10 64bit mmio: [0xe2e30000-0xe2e300ff] >>>> pci 0000:00:1f.3: reg 20 io port: [0x4040-0x405f] >>>> pci 0000:00:1c.0: PCI bridge to [bus 01-01] >>>> pci 0000:02:00.0: reg 10 64bit mmio: [0xe2d00000-0xe2d01fff] >>>> pci 0000:02:00.0: PME# supported from D0 D3hot D3cold >>>> pci 0000:02:00.0: PME# disabled >>>> pci 0000:00:1c.1: PCI bridge to [bus 02-02] >>>> pci 0000:00:1c.1: bridge 32bit mmio: [0xe2d00000-0xe2dfffff] >>>> pci 0000:00:1c.2: PCI bridge to [bus 03-08] >>>> pci 0000:00:1c.2: bridge io port: [0x3000-0x3fff] >>>> pci 0000:00:1c.2: bridge 32bit mmio: [0xe2200000-0xe2bfffff] >>>> pci 0000:00:1c.2: bridge 64bit mmio pref: [0xe0a00000-0xe13fffff] >>>> pci 0000:00:1c.3: PCI bridge to [bus 09-09] >>>> pci 0000:00:1c.3: bridge io port: [0x2000-0x2fff] >>>> pci 0000:00:1c.3: bridge 32bit mmio: [0xe1800000-0xe21fffff] >>>> pci 0000:00:1c.3: bridge 64bit mmio pref: [0xe0000000-0xe09fffff] >>>> pci 0000:0a:00.0: reg 10 32bit mmio: [0xe2c20000-0xe2c201ff] >>>> pci 0000:0a:00.0: supports D1 D2 >>>> pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold >>>> pci 0000:0a:00.0: PME# disabled >>>> pci 0000:0a:00.1: reg 10 32bit mmio: [0xe2c10000-0xe2c10fff] >>>> pci 0000:0a:00.1: reg 18 32bit mmio: [0xe2c00000-0xe2c007ff] >>>> pci 0000:0a:00.1: supports D1 D2 >>>> pci 0000:0a:00.1: PME# supported from D0 D1 D2 D3hot D3cold >>>> pci 0000:0a:00.1: PME# disabled >>>> pci 0000:00:1c.5: PCI bridge to [bus 0a-0a] >>>> pci 0000:00:1c.5: bridge 32bit mmio: [0xe2c00000-0xe2cfffff] >>>> pci_bus 0000:00: on NUMA node 0 >>>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >>>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] >>>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] >>>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] >>>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] >>>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] >>>> _OSC invalid UUID >>>> ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 >>>> ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 >>>> ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 >>>> ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 >>>> ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15) >>>> ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. >>>> ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15) >>>> ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. >>>> xen_mem: Initialising balloon driver. >>>> vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none >>>> vgaarb: loaded >>>> PCI: Using ACPI for IRQ routing >>>> Switching to clocksource xen >>>> pnp: PnP ACPI init >>>> ACPI: bus type pnp registered >>>> pnp: PnP ACPI: found 13 devices >>>> ACPI: ACPI bus type pnp unregistered >>>> system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved >>>> system 00:05: ioport range 0x680-0x69f has been reserved >>>> system 00:05: ioport range 0x1000-0x100f has been reserved >>>> system 00:05: ioport range 0xffff-0xffff has been reserved >>>> system 00:05: ioport range 0xffff-0xffff has been reserved >>>> system 00:05: ioport range 0x400-0x47f has been reserved >>>> system 00:05: ioport range 0x500-0x57f has been reserved >>>> system 00:05: ioport range 0x164e-0x164f has been reserved >>>> system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved >>>> system 00:0a: iomem range 0xfed10000-0xfed17fff has been reserved >>>> system 00:0a: iomem range 0xfed18000-0xfed18fff has been reserved >>>> system 00:0a: iomem range 0xfed19000-0xfed19fff has been reserved >>>> system 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved >>>> system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved >>>> system 00:0a: iomem range 0xfed90000-0xfed93fff has been reserved >>>> system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved >>>> system 00:0a: iomem range 0xff000000-0xffffffff could not be reserved >>>> system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved >>>> system 00:0c: iomem range 0x20000000-0x201fffff has been reserved >>>> system 00:0c: iomem range 0x40000000-0x401fffff has been reserved >>>> pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 >>>> pci 0000:00:1c.0: IO window: disabled >>>> pci 0000:00:1c.0: MEM window: disabled >>>> pci 0000:00:1c.0: PREFETCH window: disabled >>>> pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 >>>> pci 0000:00:1c.1: IO window: disabled >>>> pci 0000:00:1c.1: MEM window: 0xe2d00000-0xe2dfffff >>>> pci 0000:00:1c.1: PREFETCH window: disabled >>>> pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 >>>> pci 0000:00:1c.2: IO window: 0x3000-0x3fff >>>> pci 0000:00:1c.2: MEM window: 0xe2200000-0xe2bfffff >>>> pci 0000:00:1c.2: PREFETCH window: 0x000000e0a00000-0x000000e13fffff >>>> pci 0000:00:1c.3: PCI bridge, secondary bus 0000:09 >>>> pci 0000:00:1c.3: IO window: 0x2000-0x2fff >>>> pci 0000:00:1c.3: MEM window: 0xe1800000-0xe21fffff >>>> pci 0000:00:1c.3: PREFETCH window: 0x000000e0000000-0x000000e09fffff >>>> pci 0000:00:1c.5: PCI bridge, secondary bus 0000:0a >>>> pci 0000:00:1c.5: IO window: disabled >>>> pci 0000:00:1c.5: MEM window: 0xe2c00000-0xe2cfffff >>>> pci 0000:00:1c.5: PREFETCH window: disabled >>>> pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >>>> pci 0000:00:1c.0: setting latency timer to 64 >>>> pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 >>>> pci 0000:00:1c.1: setting latency timer to 64 >>>> pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >>>> pci 0000:00:1c.2: setting latency timer to 64 >>>> pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 >>>> pci 0000:00:1c.3: setting latency timer to 64 >>>> pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 >>>> pci 0000:00:1c.5: setting latency timer to 64 >>>> pci_bus 0000:00: resource 0 io: [0x00-0xffff] >>>> pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] >>>> pci_bus 0000:02: resource 1 mem: [0xe2d00000-0xe2dfffff] >>>> pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] >>>> pci_bus 0000:03: resource 1 mem: [0xe2200000-0xe2bfffff] >>>> pci_bus 0000:03: resource 2 pref mem [0xe0a00000-0xe13fffff] >>>> pci_bus 0000:09: resource 0 io: [0x2000-0x2fff] >>>> pci_bus 0000:09: resource 1 mem: [0xe1800000-0xe21fffff] >>>> pci_bus 0000:09: resource 2 pref mem [0xe0000000-0xe09fffff] >>>> pci_bus 0000:0a: resource 1 mem: [0xe2c00000-0xe2cfffff] >>>> NET: Registered protocol family 2 >>>> IP route cache hash table entries: 32768 (order: 5, 131072 bytes) >>>> TCP established hash table entries: 131072 (order: 8, 1048576 bytes) >>>> TCP bind hash table entries: 65536 (order: 7, 524288 bytes) >>>> TCP: Hash tables configured (established 131072 bind 65536) >>>> TCP reno registered >>>> NET: Registered protocol family 1 >>>> pci 0000:00:02.0: Boot video device >>>> Trying to unpack rootfs image as initramfs... >>>> Freeing initrd memory: 7711k freed >>>> Simple Boot Flag at 0xf3 set to 0x1 >>>> MCE: bind virq for DOM0 logging >>>> MCE_DOM0_LOG: enter dom0 mce vIRQ handler >>>> MCE_DOM0_LOG: No more urgent data >>>> MCE_DOM0_LOG: No more nonurgent data >>>> VFS: Disk quotas dquot_6.5.2 >>>> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) >>>> msgmni has been set to 379 >>>> alg: No test for stdrng (krng) >>>> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) >>>> io scheduler noop registered >>>> io scheduler anticipatory registered >>>> io scheduler deadline registered >>>> io scheduler cfq registered (default) >>>> vesafb: framebuffer at 0xd0000000, mapped to 0xf0080000, using 1200k, total 65472k >>>> vesafb: mode is 640x480x16, linelength=1280, pages=0 >>>> vesafb: scrolling: redraw >>>> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 >>>> fb0: VESA VGA frame buffer device >>>> floppy0: Unable to grab DMA2 for the floppy driver >>>> floppy0: no floppy controllers found >>>> brd: module loaded >>>> loop: module loaded >>>> Xen virtual console successfully installed as hvc0 >>>> Event-channel device installed. >>>> blktap_device_init: blktap device major 253 >>>> blktap_ring_init: blktap ring major: 253 >>>> netfront: Initialising virtual ethernet driver. >>>> Uniform Multi-Platform E-IDE driver >>>> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 >>>> i8042.c: Warning: Keylock active. >>>> serio: i8042 KBD port at 0x60,0x64 irq 1 >>>> serio: i8042 AUX port at 0x60,0x64 irq 12 >>>> mice: PS/2 mouse device common for all mice >>>> NET: Registered protocol family 17 >>>> registered taskstats version 1 >>>> input: AT Translated Set 2 keyboard as /class/input/input0 >>>> PCI IO multiplexer device installed. >>>> BIOS EDD facility v0.16 2004-Jun-25, 1 devices found >>>> Freeing unused kernel memory: 316k freed >>>> Console: switching to colour frame buffer device 80x30 >>>> usbcore: registered new interface driver usbfs >>>> usbcore: registered new interface driver hub >>>> usbcore: registered new device driver usb >>>> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver >>>> ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >>>> ehci_hcd 0000:00:1a.0: setting latency timer to 64 >>>> ehci_hcd 0000:00:1a.0: EHCI Host Controller >>>> ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 >>>> ehci_hcd 0000:00:1a.0: debug port 2 >>>> ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported >>>> ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe2e70000 >>>> ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 >>>> usb usb1: configuration #1 chosen from 1 choice >>>> hub 1-0:1.0: USB hub found >>>> hub 1-0:1.0: 3 ports detected >>>> ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>>> ehci_hcd 0000:00:1d.0: setting latency timer to 64 >>>> ehci_hcd 0000:00:1d.0: EHCI Host Controller >>>> ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 >>>> ehci_hcd 0000:00:1d.0: debug port 2 >>>> ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported >>>> ehci_hcd 0000:00:1d.0: irq 17, io mem 0xe2e50000 >>>> ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 >>>> usb usb2: configuration #1 chosen from 1 choice >>>> hub 2-0:1.0: USB hub found >>>> hub 2-0:1.0: 3 ports detected >>>> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver >>>> uhci_hcd: USB Universal Host Controller Interface driver >>>> SCSI subsystem initialized >>>> libata version 3.00 loaded. >>>> ahci 0000:00:1f.2: version 3.0 >>>> ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >>>> ahci 0000:00:1f.2: irq 1279 (279) for MSI/MSI-X >>>> ahci: SSS flag set, parallel bus scan disabled >>>> ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode >>>> ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst >>>> ahci 0000:00:1f.2: setting latency timer to 64 >>>> scsi0 : ahci >>>> scsi1 : ahci >>>> scsi2 : ahci >>>> scsi3 : ahci >>>> scsi4 : ahci >>>> scsi5 : ahci >>>> ata1: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40100 irq 1279 >>>> ata2: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40180 irq 1279 >>>> ata3: DUMMY >>>> ata4: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40280 irq 1279 >>>> ata5: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40300 irq 1279 >>>> ata6: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40380 irq 1279 >>>> input: PS/2 Generic Mouse as /class/input/input1 >>>> usb 1-1: new high speed USB device using ehci_hcd and address 2 >>>> usb 1-1: configuration #1 chosen from 1 choice >>>> hub 1-1:1.0: USB hub found >>>> hub 1-1:1.0: 6 ports detected >>>> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >>>> usb 2-1: new high speed USB device using ehci_hcd and address 2 >>>> ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) >>>> ata1.00: ATA-8: ST9500423AS, 0002DEM1, max UDMA/133 >>>> ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) >>>> ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) >>>> ata1.00: configured for UDMA/133 >>>> scsi 0:0:0:0: Direct-Access ATA ST9500423AS 0002 PQ: 0 ANSI: 5 >>>> sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) >>>> sd 0:0:0:0: [sda] 4096-byte physical blocks >>>> sd 0:0:0:0: [sda] Write Protect is off >>>> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >>>> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >>>> sda: sda1 sda2 sda3 >>>> sd 0:0:0:0: [sda] Attached SCSI disk >>>> usb 2-1: configuration #1 chosen from 1 choice >>>> hub 2-1:1.0: USB hub found >>>> hub 2-1:1.0: 8 ports detected >>>> usb 1-1.4: new full speed USB device using ehci_hcd and address 3 >>>> usb 1-1.4: configuration #1 chosen from 1 choice >>>> usb 1-1.5: new high speed USB device using ehci_hcd and address 4 >>>> usb 1-1.5: configuration #1 chosen from 1 choice >>>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >>>> ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU60N, A102, max UDMA/133, ATAPI AN >>>> ata2.00: configured for UDMA/133 >>>> scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GU60N A102 PQ: 0 ANSI: 5 >>>> usb 2-1.8: new full speed USB device using ehci_hcd and address 3 >>>> usb 2-1.8: configuration #0 chosen from 1 choice >>>> usb 2-1.8: config 0 descriptor?? >>>> ata4: SATA link down (SStatus 0 SControl 300) >>>> ata5: SATA link down (SStatus 0 SControl 300) >>>> ata6: SATA link down (SStatus 0 SControl 300) >>>> device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com >>>> kjournald starting. Commit interval 15 seconds >>>> EXT3-fs: mounted filesystem with ordered data mode. >>>> input: PC Speaker as /class/input/input2 >>>> Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled >>>> serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 >>>> 0000:00:16.3: ttyS0 at I/O 0x40e0 (irq = 17) is a 16550A >>>> e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-NAPI >>>> e1000e: Copyright(c) 1999 - 2010 Intel Corporation. >>>> e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 >>>> e1000e 0000:00:19.0: setting latency timer to 64 >>>> e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X >>>> rtc_cmos 00:06: RTC can wake from S4 >>>> rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 >>>> rtc0: alarms up to one year, y3k, 242 bytes nvram >>>> parport_pc 00:08: activated >>>> parport_pc 00:08: reported by Plug and Play ACPI >>>> parport_pc 00:08: disabled >>>> e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) d4:be:d9:0f:d0:6c >>>> e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection >>>> e1000e 0000:00:19.0: eth0: MAC: 11, PHY: 11, PBA No: 3041FF-0FF >>>> i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >>>> ACPI: I/O resource 0000:00:1f.3 [0x4040-0x405f] conflicts with ACPI region SMBI [0x4040-0x404f] >>>> ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver >>>> ACPI: SSDT cadd7798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903) >>>> ACPI: SSDT cadd8a98 00303 (v01 PmRef ApIst 00003000 INTL 20090903) >>>> ACPI: SSDT cadd6d98 00119 (v01 PmRef ApCst 00003000 INTL 20090903) >>>> input: Lid Switch as /class/input/input3 >>>> ACPI: Lid Switch [LID] >>>> input: Power Button as /class/input/input4 >>>> ACPI: Power Button [PBTN] >>>> input: Sleep Button as /class/input/input5 >>>> ACPI: Sleep Button [SBTN] >>>> input: Power Button as /class/input/input6 >>>> ACPI: Power Button [PWRF] >>>> thermal LNXTHERM:01: registered as thermal_zone0 >>>> ACPI: Thermal Zone [THM] (25 C) >>>> sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray >>>> Uniform CD-ROM driver Revision: 3.20 >>>> sr 1:0:0:0: Attached scsi CD-ROM sr0 >>>> Compat-wireless backport release: compat-wireless-v3.4-rc1-2 >>>> Backport based on linux-stable.git v3.4-rc1 >>>> cfg80211: Calling CRDA to update world regulatory domain >>>> ACPI: AC Adapter [AC] (on-line) >>>> sd 0:0:0:0: Attached scsi generic sg0 type 0 >>>> sr 1:0:0:0: Attached scsi generic sg1 type 5 >>>> ACPI: Battery Slot [BAT0] (battery present) >>>> ACPI: Battery Slot [BAT1] (battery absent) >>>> ACPI: Battery Slot [BAT2] (battery absent) >>>> Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: >>>> Copyright(c) 2003-2012 Intel Corporation >>>> iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>>> iwlwifi 0000:02:00.0: setting latency timer to 64 >>>> iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 >>>> iwlwifi 0000:02:00.0: pci_resource_base = f2478000 >>>> iwlwifi 0000:02:00.0: HW Revision ID = 0x34 >>>> iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X >>>> acpi device:37: registered as cooling_device8 >>>> input: Video Bus as /class/input/input7 >>>> ACPI: Video Device [VID] (multi-head: yes rom: no post: no) >>>> Non-volatile memory driver v1.3 >>>> lp: driver loaded but no devices found >>>> md: Autodetecting RAID arrays. >>>> md: Scanned 0 and added 0 devices. >>>> md: autorun ... >>>> md: ... autorun DONE. >>>> EXT3 FS on sda1, internal journal >>>> ISO 9660 Extensions: Microsoft Joliet Level 3 >>>> ISO 9660 Extensions: RRIP_1991A >>>> Adding 524280k swap on /var/swap/swap.001. Priority:-1 extents:137 across:637248k >>>> Microcode Update Driver: v2.00-xen <tigran@aivazian.fsnet.co.uk>, Peter Oruba >>>> Microcode Update Driver: v2.00-xen removed. >>>> ip_tables: (C) 2000-2006 Netfilter Core Team >>>> nf_conntrack version 0.5.0 (12157 buckets, 48628 max) >>>> e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X >>>> e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X >>>> 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> >>>> All bugs added by David S. Miller <davem@redhat.com> >>>> device xenbr0 entered promiscuous mode >>>> device eth0 entered promiscuous mode >>>> e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX >>>> e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO >>>> RPC: Registered udp transport module. >>>> RPC: Registered tcp transport module. >>>> RPC: Registered tcp NFSv4.1 backchannel transport module. >>>> warning: `ntpdate' uses 32-bit capabilities (legacy support in use) >>>> suspend: event channel 38 >>>> kjournald starting. Commit interval 15 seconds >>>> EXT3 FS on dm-0, internal journal >>>> EXT3-fs: mounted filesystem with ordered data mode. >>>> iwlwifi 0000:02:00.0: ea4b7e1c >>>> iwlwifi 0000:02:00.0: ca253e1c >>>> iwlwifi 0000:02:00.0: ca253de8 >>>> iwlwifi 0000:02:00.0: PCI INT A disabled >>>> >>>> >>> >>> Ok, can you please set all the debug flags. Since nothing happens here >>> we shouldn't' see that many debug prints: >>> >>> modprobe iwlwifi debug=0xffffffff >>> ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-18 21:17 ` Dominik Feser @ 2012-04-19 5:03 ` Emmanuel Grumbach 0 siblings, 0 replies; 48+ messages in thread From: Emmanuel Grumbach @ 2012-04-19 5:03 UTC (permalink / raw) To: Dominik Feser; +Cc: Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy On Thu, Apr 19, 2012 at 00:17, Dominik Feser <dominik.feser@googlemail.com> wrote: > One thing I just remembered: I had problems compiling the code and because of that commented some lines in the code out: > > # make > ./scripts/gen-compat-autoconf.sh /root/compat-wireless-3.4-rc1-2/.config /root/compat-wireless-3.4-rc1-2/config.mk > include/linux/compat_autoconf.h > make -C /lib/modules/2.6.32.12-0.7.1/build M=/root/compat-wireless-3.4-rc1-2 modules > make[1]: Entering directory `/mnt/src/redhat/BUILD/kernel-2.6.32.120.7.1' > Updating /root/compat-wireless-3.4-rc1-2/Makefile.xen > CC [M] /root/compat-wireless-3.4-rc1-2/compat/main.o > In file included from include/net/dst.h:13, > from include/net/sock.h:61, > from /root/compat-wireless-3.4-rc1-2/include/linux/compat-2.6.35.h:8, > from /root/compat-wireless-3.4-rc1-2/include/linux/compat-2.6.h:55, > from <Kommandozeile>:1: > include/linux/rtnetlink.h:785: Fehler: Redefinition von »rcu_read_lock_held« > /root/compat-wireless-3.4-rc1-2/include/linux/compat-2.6.34.h:291: Fehler: Vorherige Definition von »rcu_read_lock_held« war hier > make[3]: *** [/root/compat-wireless-3.4-rc1-2/compat/main.o] Fehler 1 > make[2]: *** [/root/compat-wireless-3.4-rc1-2/compat] Fehler 2 > make[1]: *** [_module_/root/compat-wireless-3.4-rc1-2] Fehler 2 > make[1]: Leaving directory `/mnt/src/redhat/BUILD/kernel-2.6.32.120.7.1' > make: *** [modules] Fehler 2 > > I made a change to the file /root/compat-wireless-3.4-rc1-2/include/linux/compat-2.6.34.h line 291 and commented the following lines out: > > before: > static inline int rcu_read_lock_held(void) > { > return 1; > } > > after: > > /* > static inline int rcu_read_lock_held(void) > { > return 1; > } > */ > > Might that cause the problem? How can I get rid of this error?? > Nope. that can't cause the issue. ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-18 19:33 ` Emmanuel Grumbach 2012-04-18 21:17 ` Dominik Feser @ 2012-04-19 7:25 ` Dominik Feser 2012-04-19 7:45 ` Emmanuel Grumbach 1 sibling, 1 reply; 48+ messages in thread From: Dominik Feser @ 2012-04-19 7:25 UTC (permalink / raw) To: Emmanuel Grumbach Cc: Dominik Feser, Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy Ok, I just wanted to clarify that. I changed my .config file to: # cat .config export CONFIG_COMPAT_KERNEL_2_6_33=y export CONFIG_COMPAT_KERNEL_2_6_34=y export CONFIG_COMPAT_KERNEL_2_6_35=y export CONFIG_COMPAT_KERNEL_2_6_36=y export CONFIG_COMPAT_KERNEL_2_6_37=y export CONFIG_COMPAT_KERNEL_2_6_38=y export CONFIG_COMPAT_KERNEL_2_6_39=y export CONFIG_COMPAT_KERNEL_3_0=y export CONFIG_COMPAT_KERNEL_3_1=y export CONFIG_COMPAT_KERNEL_3_2=y export CONFIG_COMPAT_KERNEL_3_3=y export CONFIG_COMPAT_KERNEL_3_4=y export CONFIG_COMPAT_KERNEL_3_5=y export CONFIG_COMPAT_FIRMWARE_CLASS=m export CONFIG_COMPAT_KFIFO=y export CONFIG_IWLWIFI_DEBUG=y And after making the driver I copied the new iwlwifi.ko into /lib/modules/2.6.32.12-0.7.1/updates/drivers/net/wireless/iwlwifi/. Then I did an rmmod iwlwifi and an modprobe iwlwifi debug=0xffffffff but: # modprobe iwlwifi debug=0xffffffff FATAL: Error inserting iwlwifi (/lib/modules/2.6.32.12-0.7.1/updates/drivers/net/wireless/iwlwifi/iwlwifi.ko): Unknown symbol in module, or unknown parameter (see dmesg) dmesg shows iwlwifi: Unknown parameter `debug' Am 18.04.2012 um 21:33 schrieb Emmanuel Grumbach: > On Wed, Apr 18, 2012 at 22:28, Dominik Feser > <dominik.feser@googlemail.com> wrote: >> Thumb question but how do I compile the driver with debug support? I think its missing... >> In which file do I have to enable the debug stuff? >> >> # modprobe iwlwifi debug=0xffffffff >> FATAL: Error inserting iwlwifi (/lib/modules/2.6.32.12-0.7.1/updates/drivers/net/wireless/iwlwifi/iwlwifi.ko): Unknown symbol in module, or unknown parameter (see dmesg) >> >> > > You need to enable CONFIG_IWLWIFI_DEBUG in your .config file. > >> >> Am 18.04.2012 um 21:25 schrieb Emmanuel Grumbach: >> >>> On Wed, Apr 18, 2012 at 19:56, Dominik Feser >>> <dominik.feser@googlemail.com> wrote: >>>> OK, that was the firmware I had tried before. I deleted it because it did not work, too. >>>> >>>> Here is the output you wanted: >>>> # ls /lib/firmware/iwlwifi-6000* >>>> /lib/firmware/iwlwifi-6000g2a-5.ucode >>>> >>>> After copying the firmware there again and rebooting dmesg looks like this: >>>> # dmesg | grep iwl >>>> iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>>> iwlwifi 0000:02:00.0: setting latency timer to 64 >>>> iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 >>>> iwlwifi 0000:02:00.0: pci_resource_base = f2478000 >>>> iwlwifi 0000:02:00.0: HW Revision ID = 0x34 >>>> iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X >>>> iwlwifi 0000:02:00.0: ea4b7e1c >>>> >>>> Still no wlan0 for me... >>>> >>>> Full dmesg: >>>> # dmesg >>>> Reserving virtual address space above 0xff400000 >>>> Linux version 2.6.32.12-0.7.1 (geeko@buildhost) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #6 SMP Mon Apr 16 19:31:06 EDT 2012 >>>> KERNEL supported cpus: >>>> Intel GenuineIntel >>>> AMD AuthenticAMD >>>> NSC Geode by NSC >>>> Cyrix CyrixInstead >>>> Centaur CentaurHauls >>>> Transmeta GenuineTMx86 >>>> Transmeta TransmetaCPU >>>> Xen-provided machine memory map: >>>> BIOS: 0000000000000000 - 000000000009a800 (usable) >>>> BIOS: 000000000009a800 - 00000000000a0000 (reserved) >>>> BIOS: 00000000000e0000 - 0000000000100000 (reserved) >>>> BIOS: 0000000000100000 - 0000000020000000 (usable) >>>> BIOS: 0000000020000000 - 0000000020200000 (reserved) >>>> BIOS: 0000000020200000 - 0000000040000000 (usable) >>>> BIOS: 0000000040000000 - 0000000040200000 (reserved) >>>> BIOS: 0000000040200000 - 00000000caa25000 (usable) >>>> BIOS: 00000000caa25000 - 00000000caa69000 (reserved) >>>> BIOS: 00000000caa69000 - 00000000cadb7000 (usable) >>>> BIOS: 00000000cadb7000 - 00000000cade7000 (reserved) >>>> BIOS: 00000000cade7000 - 00000000cafe7000 (ACPI NVS) >>>> BIOS: 00000000cafe7000 - 00000000cafff000 (ACPI data) >>>> BIOS: 00000000cafff000 - 00000000cb000000 (usable) >>>> BIOS: 00000000cb800000 - 00000000cfa00000 (reserved) >>>> BIOS: 00000000fec00000 - 00000000fec01000 (reserved) >>>> BIOS: 00000000fed1c000 - 00000000fed20000 (reserved) >>>> BIOS: 00000000fee00000 - 00000000fee01000 (reserved) >>>> BIOS: 00000000ffc00000 - 00000000ffc20000 (reserved) >>>> BIOS: 0000000100000000 - 000000022e000000 (usable) >>>> Xen-provided physical RAM map: >>>> Xen: 0000000000000000 - 000000002f800000 (usable) >>>> DMI 2.6 present. >>>> last_pfn = 0x2f800 max_arch_pfn = 0x10000000 >>>> initial memory mapped : 0 - 00000000 >>>> init_memory_mapping: 0000000000000000-000000002f800000 >>>> NX (Execute Disable) protection: active >>>> 0000000000 - 002f800000 page 4k >>>> kernel direct mapping tables up to 2f800000 @ e4e000-fcf000 >>>> RAMDISK: 005f9000 - 00d80e00 >>>> ACPI: RSDP 000fe300 00024 (v02 DELL ) >>>> ACPI: XSDT caffde18 0007C (v01 DELL CBX3 06222004 MSFT 00010013) >>>> ACPI: FACP caf87d98 000F4 (v04 DELL CBX3 06222004 MSFT 00010013) >>>> ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20090903/tbfadt-369) >>>> ACPI Warning: 32/64X FACS address mismatch in FADT - CAFE4E40/00000000CAFE4D40, using 32 (20090903/tbfadt-486) >>>> ACPI: DSDT caf55018 087F6 (v02 INT430 SYSFexxx 00001001 INTL 20090903) >>>> ACPI: FACS cafe4e40 00040 >>>> ACPI: APIC caffcf18 000CC (v02 DELL CBX3 06222004 MSFT 00010013) >>>> ACPI: TCPA cafe5d18 00032 (v02 00000000 00000000) >>>> ACPI: SSDT caf88a98 002F9 (v01 DELLTP TPM 00003000 INTL 20090903) >>>> ACPI: MCFG cafe5c98 0003C (v01 DELL SNDYBRDG 06222004 MSFT 00000097) >>>> ACPI: HPET cafe5c18 00038 (v01 A M I PCHHPET 06222004 AMI. 00000003) >>>> ACPI: BOOT cafe5b98 00028 (v01 DELL CBX3 06222004 AMI 00010013) >>>> ACPI: SSDT caf6c018 00888 (v01 PmRef Cpu0Ist 00003000 INTL 20090903) >>>> ACPI: SSDT caf6b018 00996 (v01 PmRef CpuPm 00003000 INTL 20090903) >>>> ACPI: XMAR caf87c18 000E8 (v01 INTEL SNB 00000001 INTL 00000001) >>>> ACPI: SLIC caf75c18 00176 (v03 DELL CBX3 06222004 MSFT 00010013) >>>> 0MB HIGHMEM available. >>>> 760MB LOWMEM available. >>>> mapped low ram: 0 - 2f800000 >>>> low ram: 0 - 2f800000 >>>> node 0 low ram: 00000000 - 2f000000 >>>> node 0 bootmap 00000000 - 00005e00 >>>> (5 early reservations) ==> bootmem [0000000000 - 002f000000] >>>> #0 [0000100000 - 00005d8284] TEXT DATA BSS ==> [0000100000 - 00005d8284] >>>> #1 [00005f9000 - 0000e4e000] Xen provided ==> [00005f9000 - 0000e4e000] >>>> #2 [00005d9000 - 00005d91b3] BRK ==> [00005d9000 - 00005d91b3] >>>> #3 [0000e4e000 - 0000fc4000] PGTABLE ==> [0000e4e000 - 0000fc4000] >>>> #4 [0000000000 - 0000006000] BOOTMAP ==> [0000000000 - 0000006000] >>>> found SMP MP-table at [ff3eca70] 000f1a70 >>>> Zone PFN ranges: >>>> DMA 0x00000000 -> 0x00001000 >>>> Normal 0x00001000 -> 0x0002f800 >>>> HighMem 0x0002f800 -> 0x0002f800 >>>> Movable zone start PFN for each node >>>> early_node_map[2] active PFN ranges >>>> 0: 0x00000000 -> 0x0002f000 >>>> 0: 0x0002f800 -> 0x0002f800 >>>> On node 0 totalpages: 192512 >>>> free_area_init_node: node 0, pgdat c04ef300, node_mem_map c1002000 >>>> DMA zone: 32 pages used for memmap >>>> DMA zone: 0 pages reserved >>>> DMA zone: 4064 pages, LIFO batch:0 >>>> Normal zone: 1488 pages used for memmap >>>> Normal zone: 186928 pages, LIFO batch:31 >>>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >>>> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) >>>> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) >>>> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) >>>> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled) >>>> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled) >>>> ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled) >>>> ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled) >>>> ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled) >>>> ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled) >>>> ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled) >>>> ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled) >>>> ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled) >>>> ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled) >>>> ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled) >>>> ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled) >>>> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) >>>> IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 >>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >>>> ACPI: IRQ0 used by override. >>>> ACPI: IRQ2 used by override. >>>> ACPI: IRQ9 used by override. >>>> Using ACPI (MADT) for SMP configuration information >>>> Allocating PCI resources starting at cfa00000 (gap: cfa00000:2f200000) >>>> NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 >>>> PERCPU: Embedded 9 pages/cpu @c16b9000 s13720 r0 d23144 u65536 >>>> pcpu-alloc: s13720 r0 d23144 u65536 alloc=16*4096 >>>> pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 >>>> Swapping MFNs for PFN 544 and 16bb (MFN c9544 and c9f33) >>>> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 190992 >>>> Kernel command line: root=LABEL=root-hwkkxaxy ro xencons=hvc console=hvc0 console=tty0 quiet vga=785 splash >>>> PID hash table entries: 4096 (order: 2, 16384 bytes) >>>> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) >>>> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) >>>> Enabling fast FPU save and restore... done. >>>> Enabling unmasked SIMD FPU exception support... done. >>>> Initializing CPU#0 >>>> Software IO TLB enabled: >>>> Aperture: 64 megabytes >>>> Address size: 28 bits >>>> Kernel range: c17b2000 - c57b2000 >>>> PCI-DMA: Using software bounce buffering for IO (SWIOTLB) >>>> Initializing HighMem for node 0 (00000000:00000000) >>>> Memory: 681820k/778240k available (2591k kernel code, 88012k reserved, 1466k data, 316k init, 0k highmem) >>>> virtual kernel memory layout: >>>> fixmap : 0xff077000 - 0xff3ff000 (3616 kB) >>>> pkmap : 0xfec00000 - 0xfee00000 (2048 kB) >>>> vmalloc : 0xf0000000 - 0xfebfe000 ( 235 MB) >>>> lowmem : 0xc0000000 - 0xef800000 ( 760 MB) >>>> .init : 0xc04f7000 - 0xc0546000 ( 316 kB) >>>> .data : 0xc0387d67 - 0xc04f66f8 (1466 kB) >>>> .text : 0xc0100000 - 0xc0387d67 (2591 kB) >>>> Checking if this processor honours the WP bit even in supervisor mode...Ok. >>>> Hierarchical RCU implementation. >>>> NR_IRQS:2048 >>>> Extended CMOS year: 2000 >>>> Xen reported: 2793.780 MHz processor. >>>> Console: colour dummy device 80x25 >>>> console [tty0] enabled >>>> console [hvc0] enabled >>>> Calibrating delay using timer specific routine.. 5616.72 BogoMIPS (lpj=28083614) >>>> pid_max: default: 32768 minimum: 301 >>>> Security Framework initialized >>>> Mount-cache hash table entries: 512 >>>> mce: CPU supports 7 MCE banks >>>> Checking 'hlt' instruction... OK. >>>> SMP alternatives: switching to UP code >>>> ACPI: Core revision 20090903 >>>> SMP alternatives: switching to SMP code >>>> Initializing CPU#1 >>>> Initializing CPU#2 >>>> Brought up 4 CPUs >>>> Initializing CPU#3 >>>> Grant table version 2 >>>> NET: Registered protocol family 16 >>>> ACPI FADT declares the system doesn't support PCIe ASPM, so disable it >>>> ACPI: bus type pci registered >>>> PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 >>>> PCI: Not using MMCONFIG. >>>> PCI: Using configuration type 1 for base access >>>> bio: create slab <bio-0> at 0 >>>> ACPI: EC: Look up EC in DSDT >>>> ACPI: BIOS _OSI(Linux) query ignored >>>> ACPI: BIOS _OSI(Linux) query ignored >>>> ACPI: Interpreter enabled >>>> ACPI: (supports S0 S5) >>>> ACPI: Using IOAPIC for interrupt routing >>>> PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 >>>> PCI: MCFG area at f8000000 reserved in ACPI motherboard resources >>>> PCI: Using MMCONFIG for extended config space >>>> ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930 >>>> ACPI: No dock devices found. >>>> PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug >>>> _OSC invalid UUID >>>> ACPI: PCI Root Bridge [PCI0] (0000:00) >>>> pci 0000:00:02.0: reg 10 64bit mmio: [0xe1400000-0xe17fffff] >>>> pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff] >>>> pci 0000:00:02.0: reg 20 io port: [0x4000-0x403f] >>>> pci 0000:00:16.0: reg 10 64bit mmio: [0xe2eb0000-0xe2eb000f] >>>> pci 0000:00:16.0: PME# supported from D0 D3hot D3cold >>>> pci 0000:00:16.0: PME# disabled >>>> pci 0000:00:16.3: reg 10 io port: [0x40e0-0x40e7] >>>> pci 0000:00:16.3: reg 14 32bit mmio: [0xe2e90000-0xe2e90fff] >>>> pci 0000:00:19.0: reg 10 32bit mmio: [0xe2e00000-0xe2e1ffff] >>>> pci 0000:00:19.0: reg 14 32bit mmio: [0xe2e80000-0xe2e80fff] >>>> pci 0000:00:19.0: reg 18 io port: [0x4080-0x409f] >>>> pci 0000:00:19.0: PME# supported from D0 D3hot D3cold >>>> pci 0000:00:19.0: PME# disabled >>>> pci 0000:00:1a.0: reg 10 32bit mmio: [0xe2e70000-0xe2e703ff] >>>> pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold >>>> pci 0000:00:1a.0: PME# disabled >>>> pci 0000:00:1b.0: reg 10 64bit mmio: [0xe2e60000-0xe2e63fff] >>>> pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold >>>> pci 0000:00:1b.0: PME# disabled >>>> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold >>>> pci 0000:00:1c.0: PME# disabled >>>> pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold >>>> pci 0000:00:1c.1: PME# disabled >>>> pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold >>>> pci 0000:00:1c.2: PME# disabled >>>> pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold >>>> pci 0000:00:1c.3: PME# disabled >>>> pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold >>>> pci 0000:00:1c.5: PME# disabled >>>> pci 0000:00:1d.0: reg 10 32bit mmio: [0xe2e50000-0xe2e503ff] >>>> pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold >>>> pci 0000:00:1d.0: PME# disabled >>>> pci 0000:00:1f.2: reg 10 io port: [0x40d0-0x40d7] >>>> pci 0000:00:1f.2: reg 14 io port: [0x40c0-0x40c3] >>>> pci 0000:00:1f.2: reg 18 io port: [0x40b0-0x40b7] >>>> pci 0000:00:1f.2: reg 1c io port: [0x40a0-0x40a3] >>>> pci 0000:00:1f.2: reg 20 io port: [0x4060-0x407f] >>>> pci 0000:00:1f.2: reg 24 32bit mmio: [0xe2e40000-0xe2e407ff] >>>> pci 0000:00:1f.2: PME# supported from D3hot >>>> pci 0000:00:1f.2: PME# disabled >>>> pci 0000:00:1f.3: reg 10 64bit mmio: [0xe2e30000-0xe2e300ff] >>>> pci 0000:00:1f.3: reg 20 io port: [0x4040-0x405f] >>>> pci 0000:00:1c.0: PCI bridge to [bus 01-01] >>>> pci 0000:02:00.0: reg 10 64bit mmio: [0xe2d00000-0xe2d01fff] >>>> pci 0000:02:00.0: PME# supported from D0 D3hot D3cold >>>> pci 0000:02:00.0: PME# disabled >>>> pci 0000:00:1c.1: PCI bridge to [bus 02-02] >>>> pci 0000:00:1c.1: bridge 32bit mmio: [0xe2d00000-0xe2dfffff] >>>> pci 0000:00:1c.2: PCI bridge to [bus 03-08] >>>> pci 0000:00:1c.2: bridge io port: [0x3000-0x3fff] >>>> pci 0000:00:1c.2: bridge 32bit mmio: [0xe2200000-0xe2bfffff] >>>> pci 0000:00:1c.2: bridge 64bit mmio pref: [0xe0a00000-0xe13fffff] >>>> pci 0000:00:1c.3: PCI bridge to [bus 09-09] >>>> pci 0000:00:1c.3: bridge io port: [0x2000-0x2fff] >>>> pci 0000:00:1c.3: bridge 32bit mmio: [0xe1800000-0xe21fffff] >>>> pci 0000:00:1c.3: bridge 64bit mmio pref: [0xe0000000-0xe09fffff] >>>> pci 0000:0a:00.0: reg 10 32bit mmio: [0xe2c20000-0xe2c201ff] >>>> pci 0000:0a:00.0: supports D1 D2 >>>> pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold >>>> pci 0000:0a:00.0: PME# disabled >>>> pci 0000:0a:00.1: reg 10 32bit mmio: [0xe2c10000-0xe2c10fff] >>>> pci 0000:0a:00.1: reg 18 32bit mmio: [0xe2c00000-0xe2c007ff] >>>> pci 0000:0a:00.1: supports D1 D2 >>>> pci 0000:0a:00.1: PME# supported from D0 D1 D2 D3hot D3cold >>>> pci 0000:0a:00.1: PME# disabled >>>> pci 0000:00:1c.5: PCI bridge to [bus 0a-0a] >>>> pci 0000:00:1c.5: bridge 32bit mmio: [0xe2c00000-0xe2cfffff] >>>> pci_bus 0000:00: on NUMA node 0 >>>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >>>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] >>>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] >>>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] >>>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] >>>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] >>>> _OSC invalid UUID >>>> ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 >>>> ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 >>>> ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 >>>> ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 >>>> ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15) >>>> ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. >>>> ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15) >>>> ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. >>>> xen_mem: Initialising balloon driver. >>>> vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none >>>> vgaarb: loaded >>>> PCI: Using ACPI for IRQ routing >>>> Switching to clocksource xen >>>> pnp: PnP ACPI init >>>> ACPI: bus type pnp registered >>>> pnp: PnP ACPI: found 13 devices >>>> ACPI: ACPI bus type pnp unregistered >>>> system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved >>>> system 00:05: ioport range 0x680-0x69f has been reserved >>>> system 00:05: ioport range 0x1000-0x100f has been reserved >>>> system 00:05: ioport range 0xffff-0xffff has been reserved >>>> system 00:05: ioport range 0xffff-0xffff has been reserved >>>> system 00:05: ioport range 0x400-0x47f has been reserved >>>> system 00:05: ioport range 0x500-0x57f has been reserved >>>> system 00:05: ioport range 0x164e-0x164f has been reserved >>>> system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved >>>> system 00:0a: iomem range 0xfed10000-0xfed17fff has been reserved >>>> system 00:0a: iomem range 0xfed18000-0xfed18fff has been reserved >>>> system 00:0a: iomem range 0xfed19000-0xfed19fff has been reserved >>>> system 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved >>>> system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved >>>> system 00:0a: iomem range 0xfed90000-0xfed93fff has been reserved >>>> system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved >>>> system 00:0a: iomem range 0xff000000-0xffffffff could not be reserved >>>> system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved >>>> system 00:0c: iomem range 0x20000000-0x201fffff has been reserved >>>> system 00:0c: iomem range 0x40000000-0x401fffff has been reserved >>>> pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 >>>> pci 0000:00:1c.0: IO window: disabled >>>> pci 0000:00:1c.0: MEM window: disabled >>>> pci 0000:00:1c.0: PREFETCH window: disabled >>>> pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 >>>> pci 0000:00:1c.1: IO window: disabled >>>> pci 0000:00:1c.1: MEM window: 0xe2d00000-0xe2dfffff >>>> pci 0000:00:1c.1: PREFETCH window: disabled >>>> pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 >>>> pci 0000:00:1c.2: IO window: 0x3000-0x3fff >>>> pci 0000:00:1c.2: MEM window: 0xe2200000-0xe2bfffff >>>> pci 0000:00:1c.2: PREFETCH window: 0x000000e0a00000-0x000000e13fffff >>>> pci 0000:00:1c.3: PCI bridge, secondary bus 0000:09 >>>> pci 0000:00:1c.3: IO window: 0x2000-0x2fff >>>> pci 0000:00:1c.3: MEM window: 0xe1800000-0xe21fffff >>>> pci 0000:00:1c.3: PREFETCH window: 0x000000e0000000-0x000000e09fffff >>>> pci 0000:00:1c.5: PCI bridge, secondary bus 0000:0a >>>> pci 0000:00:1c.5: IO window: disabled >>>> pci 0000:00:1c.5: MEM window: 0xe2c00000-0xe2cfffff >>>> pci 0000:00:1c.5: PREFETCH window: disabled >>>> pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >>>> pci 0000:00:1c.0: setting latency timer to 64 >>>> pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 >>>> pci 0000:00:1c.1: setting latency timer to 64 >>>> pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >>>> pci 0000:00:1c.2: setting latency timer to 64 >>>> pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 >>>> pci 0000:00:1c.3: setting latency timer to 64 >>>> pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 >>>> pci 0000:00:1c.5: setting latency timer to 64 >>>> pci_bus 0000:00: resource 0 io: [0x00-0xffff] >>>> pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] >>>> pci_bus 0000:02: resource 1 mem: [0xe2d00000-0xe2dfffff] >>>> pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] >>>> pci_bus 0000:03: resource 1 mem: [0xe2200000-0xe2bfffff] >>>> pci_bus 0000:03: resource 2 pref mem [0xe0a00000-0xe13fffff] >>>> pci_bus 0000:09: resource 0 io: [0x2000-0x2fff] >>>> pci_bus 0000:09: resource 1 mem: [0xe1800000-0xe21fffff] >>>> pci_bus 0000:09: resource 2 pref mem [0xe0000000-0xe09fffff] >>>> pci_bus 0000:0a: resource 1 mem: [0xe2c00000-0xe2cfffff] >>>> NET: Registered protocol family 2 >>>> IP route cache hash table entries: 32768 (order: 5, 131072 bytes) >>>> TCP established hash table entries: 131072 (order: 8, 1048576 bytes) >>>> TCP bind hash table entries: 65536 (order: 7, 524288 bytes) >>>> TCP: Hash tables configured (established 131072 bind 65536) >>>> TCP reno registered >>>> NET: Registered protocol family 1 >>>> pci 0000:00:02.0: Boot video device >>>> Trying to unpack rootfs image as initramfs... >>>> Freeing initrd memory: 7711k freed >>>> Simple Boot Flag at 0xf3 set to 0x1 >>>> MCE: bind virq for DOM0 logging >>>> MCE_DOM0_LOG: enter dom0 mce vIRQ handler >>>> MCE_DOM0_LOG: No more urgent data >>>> MCE_DOM0_LOG: No more nonurgent data >>>> VFS: Disk quotas dquot_6.5.2 >>>> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) >>>> msgmni has been set to 379 >>>> alg: No test for stdrng (krng) >>>> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) >>>> io scheduler noop registered >>>> io scheduler anticipatory registered >>>> io scheduler deadline registered >>>> io scheduler cfq registered (default) >>>> vesafb: framebuffer at 0xd0000000, mapped to 0xf0080000, using 1200k, total 65472k >>>> vesafb: mode is 640x480x16, linelength=1280, pages=0 >>>> vesafb: scrolling: redraw >>>> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 >>>> fb0: VESA VGA frame buffer device >>>> floppy0: Unable to grab DMA2 for the floppy driver >>>> floppy0: no floppy controllers found >>>> brd: module loaded >>>> loop: module loaded >>>> Xen virtual console successfully installed as hvc0 >>>> Event-channel device installed. >>>> blktap_device_init: blktap device major 253 >>>> blktap_ring_init: blktap ring major: 253 >>>> netfront: Initialising virtual ethernet driver. >>>> Uniform Multi-Platform E-IDE driver >>>> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 >>>> i8042.c: Warning: Keylock active. >>>> serio: i8042 KBD port at 0x60,0x64 irq 1 >>>> serio: i8042 AUX port at 0x60,0x64 irq 12 >>>> mice: PS/2 mouse device common for all mice >>>> NET: Registered protocol family 17 >>>> registered taskstats version 1 >>>> input: AT Translated Set 2 keyboard as /class/input/input0 >>>> PCI IO multiplexer device installed. >>>> BIOS EDD facility v0.16 2004-Jun-25, 1 devices found >>>> Freeing unused kernel memory: 316k freed >>>> Console: switching to colour frame buffer device 80x30 >>>> usbcore: registered new interface driver usbfs >>>> usbcore: registered new interface driver hub >>>> usbcore: registered new device driver usb >>>> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver >>>> ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >>>> ehci_hcd 0000:00:1a.0: setting latency timer to 64 >>>> ehci_hcd 0000:00:1a.0: EHCI Host Controller >>>> ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 >>>> ehci_hcd 0000:00:1a.0: debug port 2 >>>> ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported >>>> ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe2e70000 >>>> ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 >>>> usb usb1: configuration #1 chosen from 1 choice >>>> hub 1-0:1.0: USB hub found >>>> hub 1-0:1.0: 3 ports detected >>>> ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>>> ehci_hcd 0000:00:1d.0: setting latency timer to 64 >>>> ehci_hcd 0000:00:1d.0: EHCI Host Controller >>>> ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 >>>> ehci_hcd 0000:00:1d.0: debug port 2 >>>> ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported >>>> ehci_hcd 0000:00:1d.0: irq 17, io mem 0xe2e50000 >>>> ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 >>>> usb usb2: configuration #1 chosen from 1 choice >>>> hub 2-0:1.0: USB hub found >>>> hub 2-0:1.0: 3 ports detected >>>> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver >>>> uhci_hcd: USB Universal Host Controller Interface driver >>>> SCSI subsystem initialized >>>> libata version 3.00 loaded. >>>> ahci 0000:00:1f.2: version 3.0 >>>> ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >>>> ahci 0000:00:1f.2: irq 1279 (279) for MSI/MSI-X >>>> ahci: SSS flag set, parallel bus scan disabled >>>> ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode >>>> ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst >>>> ahci 0000:00:1f.2: setting latency timer to 64 >>>> scsi0 : ahci >>>> scsi1 : ahci >>>> scsi2 : ahci >>>> scsi3 : ahci >>>> scsi4 : ahci >>>> scsi5 : ahci >>>> ata1: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40100 irq 1279 >>>> ata2: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40180 irq 1279 >>>> ata3: DUMMY >>>> ata4: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40280 irq 1279 >>>> ata5: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40300 irq 1279 >>>> ata6: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40380 irq 1279 >>>> input: PS/2 Generic Mouse as /class/input/input1 >>>> usb 1-1: new high speed USB device using ehci_hcd and address 2 >>>> usb 1-1: configuration #1 chosen from 1 choice >>>> hub 1-1:1.0: USB hub found >>>> hub 1-1:1.0: 6 ports detected >>>> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >>>> usb 2-1: new high speed USB device using ehci_hcd and address 2 >>>> ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) >>>> ata1.00: ATA-8: ST9500423AS, 0002DEM1, max UDMA/133 >>>> ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) >>>> ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) >>>> ata1.00: configured for UDMA/133 >>>> scsi 0:0:0:0: Direct-Access ATA ST9500423AS 0002 PQ: 0 ANSI: 5 >>>> sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) >>>> sd 0:0:0:0: [sda] 4096-byte physical blocks >>>> sd 0:0:0:0: [sda] Write Protect is off >>>> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >>>> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >>>> sda: sda1 sda2 sda3 >>>> sd 0:0:0:0: [sda] Attached SCSI disk >>>> usb 2-1: configuration #1 chosen from 1 choice >>>> hub 2-1:1.0: USB hub found >>>> hub 2-1:1.0: 8 ports detected >>>> usb 1-1.4: new full speed USB device using ehci_hcd and address 3 >>>> usb 1-1.4: configuration #1 chosen from 1 choice >>>> usb 1-1.5: new high speed USB device using ehci_hcd and address 4 >>>> usb 1-1.5: configuration #1 chosen from 1 choice >>>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >>>> ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU60N, A102, max UDMA/133, ATAPI AN >>>> ata2.00: configured for UDMA/133 >>>> scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GU60N A102 PQ: 0 ANSI: 5 >>>> usb 2-1.8: new full speed USB device using ehci_hcd and address 3 >>>> usb 2-1.8: configuration #0 chosen from 1 choice >>>> usb 2-1.8: config 0 descriptor?? >>>> ata4: SATA link down (SStatus 0 SControl 300) >>>> ata5: SATA link down (SStatus 0 SControl 300) >>>> ata6: SATA link down (SStatus 0 SControl 300) >>>> device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com >>>> kjournald starting. Commit interval 15 seconds >>>> EXT3-fs: mounted filesystem with ordered data mode. >>>> input: PC Speaker as /class/input/input2 >>>> Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled >>>> serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 >>>> 0000:00:16.3: ttyS0 at I/O 0x40e0 (irq = 17) is a 16550A >>>> e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-NAPI >>>> e1000e: Copyright(c) 1999 - 2010 Intel Corporation. >>>> e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 >>>> e1000e 0000:00:19.0: setting latency timer to 64 >>>> e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X >>>> rtc_cmos 00:06: RTC can wake from S4 >>>> rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 >>>> rtc0: alarms up to one year, y3k, 242 bytes nvram >>>> parport_pc 00:08: activated >>>> parport_pc 00:08: reported by Plug and Play ACPI >>>> parport_pc 00:08: disabled >>>> e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) d4:be:d9:0f:d0:6c >>>> e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection >>>> e1000e 0000:00:19.0: eth0: MAC: 11, PHY: 11, PBA No: 3041FF-0FF >>>> i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >>>> ACPI: I/O resource 0000:00:1f.3 [0x4040-0x405f] conflicts with ACPI region SMBI [0x4040-0x404f] >>>> ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver >>>> ACPI: SSDT cadd7798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903) >>>> ACPI: SSDT cadd8a98 00303 (v01 PmRef ApIst 00003000 INTL 20090903) >>>> ACPI: SSDT cadd6d98 00119 (v01 PmRef ApCst 00003000 INTL 20090903) >>>> input: Lid Switch as /class/input/input3 >>>> ACPI: Lid Switch [LID] >>>> input: Power Button as /class/input/input4 >>>> ACPI: Power Button [PBTN] >>>> input: Sleep Button as /class/input/input5 >>>> ACPI: Sleep Button [SBTN] >>>> input: Power Button as /class/input/input6 >>>> ACPI: Power Button [PWRF] >>>> thermal LNXTHERM:01: registered as thermal_zone0 >>>> ACPI: Thermal Zone [THM] (25 C) >>>> sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray >>>> Uniform CD-ROM driver Revision: 3.20 >>>> sr 1:0:0:0: Attached scsi CD-ROM sr0 >>>> Compat-wireless backport release: compat-wireless-v3.4-rc1-2 >>>> Backport based on linux-stable.git v3.4-rc1 >>>> cfg80211: Calling CRDA to update world regulatory domain >>>> ACPI: AC Adapter [AC] (on-line) >>>> sd 0:0:0:0: Attached scsi generic sg0 type 0 >>>> sr 1:0:0:0: Attached scsi generic sg1 type 5 >>>> ACPI: Battery Slot [BAT0] (battery present) >>>> ACPI: Battery Slot [BAT1] (battery absent) >>>> ACPI: Battery Slot [BAT2] (battery absent) >>>> Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: >>>> Copyright(c) 2003-2012 Intel Corporation >>>> iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>>> iwlwifi 0000:02:00.0: setting latency timer to 64 >>>> iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 >>>> iwlwifi 0000:02:00.0: pci_resource_base = f2478000 >>>> iwlwifi 0000:02:00.0: HW Revision ID = 0x34 >>>> iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X >>>> acpi device:37: registered as cooling_device8 >>>> input: Video Bus as /class/input/input7 >>>> ACPI: Video Device [VID] (multi-head: yes rom: no post: no) >>>> Non-volatile memory driver v1.3 >>>> lp: driver loaded but no devices found >>>> md: Autodetecting RAID arrays. >>>> md: Scanned 0 and added 0 devices. >>>> md: autorun ... >>>> md: ... autorun DONE. >>>> EXT3 FS on sda1, internal journal >>>> ISO 9660 Extensions: Microsoft Joliet Level 3 >>>> ISO 9660 Extensions: RRIP_1991A >>>> Adding 524280k swap on /var/swap/swap.001. Priority:-1 extents:137 across:637248k >>>> Microcode Update Driver: v2.00-xen <tigran@aivazian.fsnet.co.uk>, Peter Oruba >>>> Microcode Update Driver: v2.00-xen removed. >>>> ip_tables: (C) 2000-2006 Netfilter Core Team >>>> nf_conntrack version 0.5.0 (12157 buckets, 48628 max) >>>> e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X >>>> e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X >>>> 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> >>>> All bugs added by David S. Miller <davem@redhat.com> >>>> device xenbr0 entered promiscuous mode >>>> device eth0 entered promiscuous mode >>>> e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX >>>> e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO >>>> RPC: Registered udp transport module. >>>> RPC: Registered tcp transport module. >>>> RPC: Registered tcp NFSv4.1 backchannel transport module. >>>> warning: `ntpdate' uses 32-bit capabilities (legacy support in use) >>>> suspend: event channel 38 >>>> kjournald starting. Commit interval 15 seconds >>>> EXT3 FS on dm-0, internal journal >>>> EXT3-fs: mounted filesystem with ordered data mode. >>>> iwlwifi 0000:02:00.0: ea4b7e1c >>>> iwlwifi 0000:02:00.0: ca253e1c >>>> iwlwifi 0000:02:00.0: ca253de8 >>>> iwlwifi 0000:02:00.0: PCI INT A disabled >>>> >>>> >>> >>> Ok, can you please set all the debug flags. Since nothing happens here >>> we shouldn't' see that many debug prints: >>> >>> modprobe iwlwifi debug=0xffffffff >>> ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-19 7:25 ` Dominik Feser @ 2012-04-19 7:45 ` Emmanuel Grumbach 2012-04-19 7:49 ` Dominik Feser 0 siblings, 1 reply; 48+ messages in thread From: Emmanuel Grumbach @ 2012-04-19 7:45 UTC (permalink / raw) To: Dominik Feser; +Cc: Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy On Thu, Apr 19, 2012 at 10:25, Dominik Feser <dominik.feser@googlemail.com> wrote: > Ok, I just wanted to clarify that. > I changed my .config file to: > > # cat .config > export CONFIG_COMPAT_KERNEL_2_6_33=y > export CONFIG_COMPAT_KERNEL_2_6_34=y > export CONFIG_COMPAT_KERNEL_2_6_35=y > export CONFIG_COMPAT_KERNEL_2_6_36=y > export CONFIG_COMPAT_KERNEL_2_6_37=y > export CONFIG_COMPAT_KERNEL_2_6_38=y > export CONFIG_COMPAT_KERNEL_2_6_39=y > export CONFIG_COMPAT_KERNEL_3_0=y > export CONFIG_COMPAT_KERNEL_3_1=y > export CONFIG_COMPAT_KERNEL_3_2=y > export CONFIG_COMPAT_KERNEL_3_3=y > export CONFIG_COMPAT_KERNEL_3_4=y > export CONFIG_COMPAT_KERNEL_3_5=y > export CONFIG_COMPAT_FIRMWARE_CLASS=m > export CONFIG_COMPAT_KFIFO=y > export CONFIG_IWLWIFI_DEBUG=y > > And after making the driver I copied the new iwlwifi.ko into /lib/modules/2.6.32.12-0.7.1/updates/drivers/net/wireless/iwlwifi/. Then I did an rmmod iwlwifi and an modprobe iwlwifi debug=0xffffffff but: > > # modprobe iwlwifi debug=0xffffffff > FATAL: Error inserting iwlwifi (/lib/modules/2.6.32.12-0.7.1/updates/drivers/net/wireless/iwlwifi/iwlwifi.ko): Unknown symbol in module, or unknown parameter (see dmesg) > > dmesg shows iwlwifi: Unknown parameter `debug' > > > > > > Am 18.04.2012 um 21:33 schrieb Emmanuel Grumbach: > >> On Wed, Apr 18, 2012 at 22:28, Dominik Feser >> <dominik.feser@googlemail.com> wrote: >>> Thumb question but how do I compile the driver with debug support? I think its missing... >>> In which file do I have to enable the debug stuff? >>> >>> # modprobe iwlwifi debug=0xffffffff >>> FATAL: Error inserting iwlwifi (/lib/modules/2.6.32.12-0.7.1/updates/drivers/net/wireless/iwlwifi/iwlwifi.ko): Unknown symbol in module, or unknown parameter (see dmesg) >>> >>> >> >> You need to enable CONFIG_IWLWIFI_DEBUG in your .config file. >> >>> >>> Am 18.04.2012 um 21:25 schrieb Emmanuel Grumbach: >>> >>>> On Wed, Apr 18, 2012 at 19:56, Dominik Feser >>>> <dominik.feser@googlemail.com> wrote: >>>>> OK, that was the firmware I had tried before. I deleted it because it did not work, too. >>>>> >>>>> Here is the output you wanted: >>>>> # ls /lib/firmware/iwlwifi-6000* >>>>> /lib/firmware/iwlwifi-6000g2a-5.ucode >>>>> >>>>> After copying the firmware there again and rebooting dmesg looks like this: >>>>> # dmesg | grep iwl >>>>> iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>>>> iwlwifi 0000:02:00.0: setting latency timer to 64 >>>>> iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 >>>>> iwlwifi 0000:02:00.0: pci_resource_base = f2478000 >>>>> iwlwifi 0000:02:00.0: HW Revision ID = 0x34 >>>>> iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X >>>>> iwlwifi 0000:02:00.0: ea4b7e1c >>>>> >>>>> Still no wlan0 for me... >>>>> >>>>> Full dmesg: >>>>> # dmesg >>>>> Reserving virtual address space above 0xff400000 >>>>> Linux version 2.6.32.12-0.7.1 (geeko@buildhost) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #6 SMP Mon Apr 16 19:31:06 EDT 2012 >>>>> KERNEL supported cpus: >>>>> Intel GenuineIntel >>>>> AMD AuthenticAMD >>>>> NSC Geode by NSC >>>>> Cyrix CyrixInstead >>>>> Centaur CentaurHauls >>>>> Transmeta GenuineTMx86 >>>>> Transmeta TransmetaCPU >>>>> Xen-provided machine memory map: >>>>> BIOS: 0000000000000000 - 000000000009a800 (usable) >>>>> BIOS: 000000000009a800 - 00000000000a0000 (reserved) >>>>> BIOS: 00000000000e0000 - 0000000000100000 (reserved) >>>>> BIOS: 0000000000100000 - 0000000020000000 (usable) >>>>> BIOS: 0000000020000000 - 0000000020200000 (reserved) >>>>> BIOS: 0000000020200000 - 0000000040000000 (usable) >>>>> BIOS: 0000000040000000 - 0000000040200000 (reserved) >>>>> BIOS: 0000000040200000 - 00000000caa25000 (usable) >>>>> BIOS: 00000000caa25000 - 00000000caa69000 (reserved) >>>>> BIOS: 00000000caa69000 - 00000000cadb7000 (usable) >>>>> BIOS: 00000000cadb7000 - 00000000cade7000 (reserved) >>>>> BIOS: 00000000cade7000 - 00000000cafe7000 (ACPI NVS) >>>>> BIOS: 00000000cafe7000 - 00000000cafff000 (ACPI data) >>>>> BIOS: 00000000cafff000 - 00000000cb000000 (usable) >>>>> BIOS: 00000000cb800000 - 00000000cfa00000 (reserved) >>>>> BIOS: 00000000fec00000 - 00000000fec01000 (reserved) >>>>> BIOS: 00000000fed1c000 - 00000000fed20000 (reserved) >>>>> BIOS: 00000000fee00000 - 00000000fee01000 (reserved) >>>>> BIOS: 00000000ffc00000 - 00000000ffc20000 (reserved) >>>>> BIOS: 0000000100000000 - 000000022e000000 (usable) >>>>> Xen-provided physical RAM map: >>>>> Xen: 0000000000000000 - 000000002f800000 (usable) >>>>> DMI 2.6 present. >>>>> last_pfn = 0x2f800 max_arch_pfn = 0x10000000 >>>>> initial memory mapped : 0 - 00000000 >>>>> init_memory_mapping: 0000000000000000-000000002f800000 >>>>> NX (Execute Disable) protection: active >>>>> 0000000000 - 002f800000 page 4k >>>>> kernel direct mapping tables up to 2f800000 @ e4e000-fcf000 >>>>> RAMDISK: 005f9000 - 00d80e00 >>>>> ACPI: RSDP 000fe300 00024 (v02 DELL ) >>>>> ACPI: XSDT caffde18 0007C (v01 DELL CBX3 06222004 MSFT 00010013) >>>>> ACPI: FACP caf87d98 000F4 (v04 DELL CBX3 06222004 MSFT 00010013) >>>>> ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20090903/tbfadt-369) >>>>> ACPI Warning: 32/64X FACS address mismatch in FADT - CAFE4E40/00000000CAFE4D40, using 32 (20090903/tbfadt-486) >>>>> ACPI: DSDT caf55018 087F6 (v02 INT430 SYSFexxx 00001001 INTL 20090903) >>>>> ACPI: FACS cafe4e40 00040 >>>>> ACPI: APIC caffcf18 000CC (v02 DELL CBX3 06222004 MSFT 00010013) >>>>> ACPI: TCPA cafe5d18 00032 (v02 00000000 00000000) >>>>> ACPI: SSDT caf88a98 002F9 (v01 DELLTP TPM 00003000 INTL 20090903) >>>>> ACPI: MCFG cafe5c98 0003C (v01 DELL SNDYBRDG 06222004 MSFT 00000097) >>>>> ACPI: HPET cafe5c18 00038 (v01 A M I PCHHPET 06222004 AMI. 00000003) >>>>> ACPI: BOOT cafe5b98 00028 (v01 DELL CBX3 06222004 AMI 00010013) >>>>> ACPI: SSDT caf6c018 00888 (v01 PmRef Cpu0Ist 00003000 INTL 20090903) >>>>> ACPI: SSDT caf6b018 00996 (v01 PmRef CpuPm 00003000 INTL 20090903) >>>>> ACPI: XMAR caf87c18 000E8 (v01 INTEL SNB 00000001 INTL 00000001) >>>>> ACPI: SLIC caf75c18 00176 (v03 DELL CBX3 06222004 MSFT 00010013) >>>>> 0MB HIGHMEM available. >>>>> 760MB LOWMEM available. >>>>> mapped low ram: 0 - 2f800000 >>>>> low ram: 0 - 2f800000 >>>>> node 0 low ram: 00000000 - 2f000000 >>>>> node 0 bootmap 00000000 - 00005e00 >>>>> (5 early reservations) ==> bootmem [0000000000 - 002f000000] >>>>> #0 [0000100000 - 00005d8284] TEXT DATA BSS ==> [0000100000 - 00005d8284] >>>>> #1 [00005f9000 - 0000e4e000] Xen provided ==> [00005f9000 - 0000e4e000] >>>>> #2 [00005d9000 - 00005d91b3] BRK ==> [00005d9000 - 00005d91b3] >>>>> #3 [0000e4e000 - 0000fc4000] PGTABLE ==> [0000e4e000 - 0000fc4000] >>>>> #4 [0000000000 - 0000006000] BOOTMAP ==> [0000000000 - 0000006000] >>>>> found SMP MP-table at [ff3eca70] 000f1a70 >>>>> Zone PFN ranges: >>>>> DMA 0x00000000 -> 0x00001000 >>>>> Normal 0x00001000 -> 0x0002f800 >>>>> HighMem 0x0002f800 -> 0x0002f800 >>>>> Movable zone start PFN for each node >>>>> early_node_map[2] active PFN ranges >>>>> 0: 0x00000000 -> 0x0002f000 >>>>> 0: 0x0002f800 -> 0x0002f800 >>>>> On node 0 totalpages: 192512 >>>>> free_area_init_node: node 0, pgdat c04ef300, node_mem_map c1002000 >>>>> DMA zone: 32 pages used for memmap >>>>> DMA zone: 0 pages reserved >>>>> DMA zone: 4064 pages, LIFO batch:0 >>>>> Normal zone: 1488 pages used for memmap >>>>> Normal zone: 186928 pages, LIFO batch:31 >>>>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >>>>> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) >>>>> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) >>>>> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) >>>>> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled) >>>>> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled) >>>>> ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled) >>>>> ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled) >>>>> ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled) >>>>> ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled) >>>>> ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled) >>>>> ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled) >>>>> ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled) >>>>> ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled) >>>>> ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled) >>>>> ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled) >>>>> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) >>>>> IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 >>>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >>>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >>>>> ACPI: IRQ0 used by override. >>>>> ACPI: IRQ2 used by override. >>>>> ACPI: IRQ9 used by override. >>>>> Using ACPI (MADT) for SMP configuration information >>>>> Allocating PCI resources starting at cfa00000 (gap: cfa00000:2f200000) >>>>> NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 >>>>> PERCPU: Embedded 9 pages/cpu @c16b9000 s13720 r0 d23144 u65536 >>>>> pcpu-alloc: s13720 r0 d23144 u65536 alloc=16*4096 >>>>> pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 >>>>> Swapping MFNs for PFN 544 and 16bb (MFN c9544 and c9f33) >>>>> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 190992 >>>>> Kernel command line: root=LABEL=root-hwkkxaxy ro xencons=hvc console=hvc0 console=tty0 quiet vga=785 splash >>>>> PID hash table entries: 4096 (order: 2, 16384 bytes) >>>>> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) >>>>> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) >>>>> Enabling fast FPU save and restore... done. >>>>> Enabling unmasked SIMD FPU exception support... done. >>>>> Initializing CPU#0 >>>>> Software IO TLB enabled: >>>>> Aperture: 64 megabytes >>>>> Address size: 28 bits >>>>> Kernel range: c17b2000 - c57b2000 >>>>> PCI-DMA: Using software bounce buffering for IO (SWIOTLB) >>>>> Initializing HighMem for node 0 (00000000:00000000) >>>>> Memory: 681820k/778240k available (2591k kernel code, 88012k reserved, 1466k data, 316k init, 0k highmem) >>>>> virtual kernel memory layout: >>>>> fixmap : 0xff077000 - 0xff3ff000 (3616 kB) >>>>> pkmap : 0xfec00000 - 0xfee00000 (2048 kB) >>>>> vmalloc : 0xf0000000 - 0xfebfe000 ( 235 MB) >>>>> lowmem : 0xc0000000 - 0xef800000 ( 760 MB) >>>>> .init : 0xc04f7000 - 0xc0546000 ( 316 kB) >>>>> .data : 0xc0387d67 - 0xc04f66f8 (1466 kB) >>>>> .text : 0xc0100000 - 0xc0387d67 (2591 kB) >>>>> Checking if this processor honours the WP bit even in supervisor mode...Ok. >>>>> Hierarchical RCU implementation. >>>>> NR_IRQS:2048 >>>>> Extended CMOS year: 2000 >>>>> Xen reported: 2793.780 MHz processor. >>>>> Console: colour dummy device 80x25 >>>>> console [tty0] enabled >>>>> console [hvc0] enabled >>>>> Calibrating delay using timer specific routine.. 5616.72 BogoMIPS (lpj=28083614) >>>>> pid_max: default: 32768 minimum: 301 >>>>> Security Framework initialized >>>>> Mount-cache hash table entries: 512 >>>>> mce: CPU supports 7 MCE banks >>>>> Checking 'hlt' instruction... OK. >>>>> SMP alternatives: switching to UP code >>>>> ACPI: Core revision 20090903 >>>>> SMP alternatives: switching to SMP code >>>>> Initializing CPU#1 >>>>> Initializing CPU#2 >>>>> Brought up 4 CPUs >>>>> Initializing CPU#3 >>>>> Grant table version 2 >>>>> NET: Registered protocol family 16 >>>>> ACPI FADT declares the system doesn't support PCIe ASPM, so disable it >>>>> ACPI: bus type pci registered >>>>> PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 >>>>> PCI: Not using MMCONFIG. >>>>> PCI: Using configuration type 1 for base access >>>>> bio: create slab <bio-0> at 0 >>>>> ACPI: EC: Look up EC in DSDT >>>>> ACPI: BIOS _OSI(Linux) query ignored >>>>> ACPI: BIOS _OSI(Linux) query ignored >>>>> ACPI: Interpreter enabled >>>>> ACPI: (supports S0 S5) >>>>> ACPI: Using IOAPIC for interrupt routing >>>>> PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 >>>>> PCI: MCFG area at f8000000 reserved in ACPI motherboard resources >>>>> PCI: Using MMCONFIG for extended config space >>>>> ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930 >>>>> ACPI: No dock devices found. >>>>> PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug >>>>> _OSC invalid UUID >>>>> ACPI: PCI Root Bridge [PCI0] (0000:00) >>>>> pci 0000:00:02.0: reg 10 64bit mmio: [0xe1400000-0xe17fffff] >>>>> pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff] >>>>> pci 0000:00:02.0: reg 20 io port: [0x4000-0x403f] >>>>> pci 0000:00:16.0: reg 10 64bit mmio: [0xe2eb0000-0xe2eb000f] >>>>> pci 0000:00:16.0: PME# supported from D0 D3hot D3cold >>>>> pci 0000:00:16.0: PME# disabled >>>>> pci 0000:00:16.3: reg 10 io port: [0x40e0-0x40e7] >>>>> pci 0000:00:16.3: reg 14 32bit mmio: [0xe2e90000-0xe2e90fff] >>>>> pci 0000:00:19.0: reg 10 32bit mmio: [0xe2e00000-0xe2e1ffff] >>>>> pci 0000:00:19.0: reg 14 32bit mmio: [0xe2e80000-0xe2e80fff] >>>>> pci 0000:00:19.0: reg 18 io port: [0x4080-0x409f] >>>>> pci 0000:00:19.0: PME# supported from D0 D3hot D3cold >>>>> pci 0000:00:19.0: PME# disabled >>>>> pci 0000:00:1a.0: reg 10 32bit mmio: [0xe2e70000-0xe2e703ff] >>>>> pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold >>>>> pci 0000:00:1a.0: PME# disabled >>>>> pci 0000:00:1b.0: reg 10 64bit mmio: [0xe2e60000-0xe2e63fff] >>>>> pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold >>>>> pci 0000:00:1b.0: PME# disabled >>>>> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold >>>>> pci 0000:00:1c.0: PME# disabled >>>>> pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold >>>>> pci 0000:00:1c.1: PME# disabled >>>>> pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold >>>>> pci 0000:00:1c.2: PME# disabled >>>>> pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold >>>>> pci 0000:00:1c.3: PME# disabled >>>>> pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold >>>>> pci 0000:00:1c.5: PME# disabled >>>>> pci 0000:00:1d.0: reg 10 32bit mmio: [0xe2e50000-0xe2e503ff] >>>>> pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold >>>>> pci 0000:00:1d.0: PME# disabled >>>>> pci 0000:00:1f.2: reg 10 io port: [0x40d0-0x40d7] >>>>> pci 0000:00:1f.2: reg 14 io port: [0x40c0-0x40c3] >>>>> pci 0000:00:1f.2: reg 18 io port: [0x40b0-0x40b7] >>>>> pci 0000:00:1f.2: reg 1c io port: [0x40a0-0x40a3] >>>>> pci 0000:00:1f.2: reg 20 io port: [0x4060-0x407f] >>>>> pci 0000:00:1f.2: reg 24 32bit mmio: [0xe2e40000-0xe2e407ff] >>>>> pci 0000:00:1f.2: PME# supported from D3hot >>>>> pci 0000:00:1f.2: PME# disabled >>>>> pci 0000:00:1f.3: reg 10 64bit mmio: [0xe2e30000-0xe2e300ff] >>>>> pci 0000:00:1f.3: reg 20 io port: [0x4040-0x405f] >>>>> pci 0000:00:1c.0: PCI bridge to [bus 01-01] >>>>> pci 0000:02:00.0: reg 10 64bit mmio: [0xe2d00000-0xe2d01fff] >>>>> pci 0000:02:00.0: PME# supported from D0 D3hot D3cold >>>>> pci 0000:02:00.0: PME# disabled >>>>> pci 0000:00:1c.1: PCI bridge to [bus 02-02] >>>>> pci 0000:00:1c.1: bridge 32bit mmio: [0xe2d00000-0xe2dfffff] >>>>> pci 0000:00:1c.2: PCI bridge to [bus 03-08] >>>>> pci 0000:00:1c.2: bridge io port: [0x3000-0x3fff] >>>>> pci 0000:00:1c.2: bridge 32bit mmio: [0xe2200000-0xe2bfffff] >>>>> pci 0000:00:1c.2: bridge 64bit mmio pref: [0xe0a00000-0xe13fffff] >>>>> pci 0000:00:1c.3: PCI bridge to [bus 09-09] >>>>> pci 0000:00:1c.3: bridge io port: [0x2000-0x2fff] >>>>> pci 0000:00:1c.3: bridge 32bit mmio: [0xe1800000-0xe21fffff] >>>>> pci 0000:00:1c.3: bridge 64bit mmio pref: [0xe0000000-0xe09fffff] >>>>> pci 0000:0a:00.0: reg 10 32bit mmio: [0xe2c20000-0xe2c201ff] >>>>> pci 0000:0a:00.0: supports D1 D2 >>>>> pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold >>>>> pci 0000:0a:00.0: PME# disabled >>>>> pci 0000:0a:00.1: reg 10 32bit mmio: [0xe2c10000-0xe2c10fff] >>>>> pci 0000:0a:00.1: reg 18 32bit mmio: [0xe2c00000-0xe2c007ff] >>>>> pci 0000:0a:00.1: supports D1 D2 >>>>> pci 0000:0a:00.1: PME# supported from D0 D1 D2 D3hot D3cold >>>>> pci 0000:0a:00.1: PME# disabled >>>>> pci 0000:00:1c.5: PCI bridge to [bus 0a-0a] >>>>> pci 0000:00:1c.5: bridge 32bit mmio: [0xe2c00000-0xe2cfffff] >>>>> pci_bus 0000:00: on NUMA node 0 >>>>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >>>>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] >>>>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] >>>>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] >>>>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] >>>>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] >>>>> _OSC invalid UUID >>>>> ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 >>>>> ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 >>>>> ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 >>>>> ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 >>>>> ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15) >>>>> ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. >>>>> ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15) >>>>> ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. >>>>> xen_mem: Initialising balloon driver. >>>>> vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none >>>>> vgaarb: loaded >>>>> PCI: Using ACPI for IRQ routing >>>>> Switching to clocksource xen >>>>> pnp: PnP ACPI init >>>>> ACPI: bus type pnp registered >>>>> pnp: PnP ACPI: found 13 devices >>>>> ACPI: ACPI bus type pnp unregistered >>>>> system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved >>>>> system 00:05: ioport range 0x680-0x69f has been reserved >>>>> system 00:05: ioport range 0x1000-0x100f has been reserved >>>>> system 00:05: ioport range 0xffff-0xffff has been reserved >>>>> system 00:05: ioport range 0xffff-0xffff has been reserved >>>>> system 00:05: ioport range 0x400-0x47f has been reserved >>>>> system 00:05: ioport range 0x500-0x57f has been reserved >>>>> system 00:05: ioport range 0x164e-0x164f has been reserved >>>>> system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved >>>>> system 00:0a: iomem range 0xfed10000-0xfed17fff has been reserved >>>>> system 00:0a: iomem range 0xfed18000-0xfed18fff has been reserved >>>>> system 00:0a: iomem range 0xfed19000-0xfed19fff has been reserved >>>>> system 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved >>>>> system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved >>>>> system 00:0a: iomem range 0xfed90000-0xfed93fff has been reserved >>>>> system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved >>>>> system 00:0a: iomem range 0xff000000-0xffffffff could not be reserved >>>>> system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved >>>>> system 00:0c: iomem range 0x20000000-0x201fffff has been reserved >>>>> system 00:0c: iomem range 0x40000000-0x401fffff has been reserved >>>>> pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 >>>>> pci 0000:00:1c.0: IO window: disabled >>>>> pci 0000:00:1c.0: MEM window: disabled >>>>> pci 0000:00:1c.0: PREFETCH window: disabled >>>>> pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 >>>>> pci 0000:00:1c.1: IO window: disabled >>>>> pci 0000:00:1c.1: MEM window: 0xe2d00000-0xe2dfffff >>>>> pci 0000:00:1c.1: PREFETCH window: disabled >>>>> pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 >>>>> pci 0000:00:1c.2: IO window: 0x3000-0x3fff >>>>> pci 0000:00:1c.2: MEM window: 0xe2200000-0xe2bfffff >>>>> pci 0000:00:1c.2: PREFETCH window: 0x000000e0a00000-0x000000e13fffff >>>>> pci 0000:00:1c.3: PCI bridge, secondary bus 0000:09 >>>>> pci 0000:00:1c.3: IO window: 0x2000-0x2fff >>>>> pci 0000:00:1c.3: MEM window: 0xe1800000-0xe21fffff >>>>> pci 0000:00:1c.3: PREFETCH window: 0x000000e0000000-0x000000e09fffff >>>>> pci 0000:00:1c.5: PCI bridge, secondary bus 0000:0a >>>>> pci 0000:00:1c.5: IO window: disabled >>>>> pci 0000:00:1c.5: MEM window: 0xe2c00000-0xe2cfffff >>>>> pci 0000:00:1c.5: PREFETCH window: disabled >>>>> pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >>>>> pci 0000:00:1c.0: setting latency timer to 64 >>>>> pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 >>>>> pci 0000:00:1c.1: setting latency timer to 64 >>>>> pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >>>>> pci 0000:00:1c.2: setting latency timer to 64 >>>>> pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 >>>>> pci 0000:00:1c.3: setting latency timer to 64 >>>>> pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 >>>>> pci 0000:00:1c.5: setting latency timer to 64 >>>>> pci_bus 0000:00: resource 0 io: [0x00-0xffff] >>>>> pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] >>>>> pci_bus 0000:02: resource 1 mem: [0xe2d00000-0xe2dfffff] >>>>> pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] >>>>> pci_bus 0000:03: resource 1 mem: [0xe2200000-0xe2bfffff] >>>>> pci_bus 0000:03: resource 2 pref mem [0xe0a00000-0xe13fffff] >>>>> pci_bus 0000:09: resource 0 io: [0x2000-0x2fff] >>>>> pci_bus 0000:09: resource 1 mem: [0xe1800000-0xe21fffff] >>>>> pci_bus 0000:09: resource 2 pref mem [0xe0000000-0xe09fffff] >>>>> pci_bus 0000:0a: resource 1 mem: [0xe2c00000-0xe2cfffff] >>>>> NET: Registered protocol family 2 >>>>> IP route cache hash table entries: 32768 (order: 5, 131072 bytes) >>>>> TCP established hash table entries: 131072 (order: 8, 1048576 bytes) >>>>> TCP bind hash table entries: 65536 (order: 7, 524288 bytes) >>>>> TCP: Hash tables configured (established 131072 bind 65536) >>>>> TCP reno registered >>>>> NET: Registered protocol family 1 >>>>> pci 0000:00:02.0: Boot video device >>>>> Trying to unpack rootfs image as initramfs... >>>>> Freeing initrd memory: 7711k freed >>>>> Simple Boot Flag at 0xf3 set to 0x1 >>>>> MCE: bind virq for DOM0 logging >>>>> MCE_DOM0_LOG: enter dom0 mce vIRQ handler >>>>> MCE_DOM0_LOG: No more urgent data >>>>> MCE_DOM0_LOG: No more nonurgent data >>>>> VFS: Disk quotas dquot_6.5.2 >>>>> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) >>>>> msgmni has been set to 379 >>>>> alg: No test for stdrng (krng) >>>>> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) >>>>> io scheduler noop registered >>>>> io scheduler anticipatory registered >>>>> io scheduler deadline registered >>>>> io scheduler cfq registered (default) >>>>> vesafb: framebuffer at 0xd0000000, mapped to 0xf0080000, using 1200k, total 65472k >>>>> vesafb: mode is 640x480x16, linelength=1280, pages=0 >>>>> vesafb: scrolling: redraw >>>>> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 >>>>> fb0: VESA VGA frame buffer device >>>>> floppy0: Unable to grab DMA2 for the floppy driver >>>>> floppy0: no floppy controllers found >>>>> brd: module loaded >>>>> loop: module loaded >>>>> Xen virtual console successfully installed as hvc0 >>>>> Event-channel device installed. >>>>> blktap_device_init: blktap device major 253 >>>>> blktap_ring_init: blktap ring major: 253 >>>>> netfront: Initialising virtual ethernet driver. >>>>> Uniform Multi-Platform E-IDE driver >>>>> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 >>>>> i8042.c: Warning: Keylock active. >>>>> serio: i8042 KBD port at 0x60,0x64 irq 1 >>>>> serio: i8042 AUX port at 0x60,0x64 irq 12 >>>>> mice: PS/2 mouse device common for all mice >>>>> NET: Registered protocol family 17 >>>>> registered taskstats version 1 >>>>> input: AT Translated Set 2 keyboard as /class/input/input0 >>>>> PCI IO multiplexer device installed. >>>>> BIOS EDD facility v0.16 2004-Jun-25, 1 devices found >>>>> Freeing unused kernel memory: 316k freed >>>>> Console: switching to colour frame buffer device 80x30 >>>>> usbcore: registered new interface driver usbfs >>>>> usbcore: registered new interface driver hub >>>>> usbcore: registered new device driver usb >>>>> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver >>>>> ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >>>>> ehci_hcd 0000:00:1a.0: setting latency timer to 64 >>>>> ehci_hcd 0000:00:1a.0: EHCI Host Controller >>>>> ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 >>>>> ehci_hcd 0000:00:1a.0: debug port 2 >>>>> ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported >>>>> ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe2e70000 >>>>> ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 >>>>> usb usb1: configuration #1 chosen from 1 choice >>>>> hub 1-0:1.0: USB hub found >>>>> hub 1-0:1.0: 3 ports detected >>>>> ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>>>> ehci_hcd 0000:00:1d.0: setting latency timer to 64 >>>>> ehci_hcd 0000:00:1d.0: EHCI Host Controller >>>>> ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 >>>>> ehci_hcd 0000:00:1d.0: debug port 2 >>>>> ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported >>>>> ehci_hcd 0000:00:1d.0: irq 17, io mem 0xe2e50000 >>>>> ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 >>>>> usb usb2: configuration #1 chosen from 1 choice >>>>> hub 2-0:1.0: USB hub found >>>>> hub 2-0:1.0: 3 ports detected >>>>> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver >>>>> uhci_hcd: USB Universal Host Controller Interface driver >>>>> SCSI subsystem initialized >>>>> libata version 3.00 loaded. >>>>> ahci 0000:00:1f.2: version 3.0 >>>>> ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >>>>> ahci 0000:00:1f.2: irq 1279 (279) for MSI/MSI-X >>>>> ahci: SSS flag set, parallel bus scan disabled >>>>> ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode >>>>> ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst >>>>> ahci 0000:00:1f.2: setting latency timer to 64 >>>>> scsi0 : ahci >>>>> scsi1 : ahci >>>>> scsi2 : ahci >>>>> scsi3 : ahci >>>>> scsi4 : ahci >>>>> scsi5 : ahci >>>>> ata1: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40100 irq 1279 >>>>> ata2: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40180 irq 1279 >>>>> ata3: DUMMY >>>>> ata4: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40280 irq 1279 >>>>> ata5: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40300 irq 1279 >>>>> ata6: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40380 irq 1279 >>>>> input: PS/2 Generic Mouse as /class/input/input1 >>>>> usb 1-1: new high speed USB device using ehci_hcd and address 2 >>>>> usb 1-1: configuration #1 chosen from 1 choice >>>>> hub 1-1:1.0: USB hub found >>>>> hub 1-1:1.0: 6 ports detected >>>>> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >>>>> usb 2-1: new high speed USB device using ehci_hcd and address 2 >>>>> ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) >>>>> ata1.00: ATA-8: ST9500423AS, 0002DEM1, max UDMA/133 >>>>> ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) >>>>> ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) >>>>> ata1.00: configured for UDMA/133 >>>>> scsi 0:0:0:0: Direct-Access ATA ST9500423AS 0002 PQ: 0 ANSI: 5 >>>>> sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) >>>>> sd 0:0:0:0: [sda] 4096-byte physical blocks >>>>> sd 0:0:0:0: [sda] Write Protect is off >>>>> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >>>>> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >>>>> sda: sda1 sda2 sda3 >>>>> sd 0:0:0:0: [sda] Attached SCSI disk >>>>> usb 2-1: configuration #1 chosen from 1 choice >>>>> hub 2-1:1.0: USB hub found >>>>> hub 2-1:1.0: 8 ports detected >>>>> usb 1-1.4: new full speed USB device using ehci_hcd and address 3 >>>>> usb 1-1.4: configuration #1 chosen from 1 choice >>>>> usb 1-1.5: new high speed USB device using ehci_hcd and address 4 >>>>> usb 1-1.5: configuration #1 chosen from 1 choice >>>>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >>>>> ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU60N, A102, max UDMA/133, ATAPI AN >>>>> ata2.00: configured for UDMA/133 >>>>> scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GU60N A102 PQ: 0 ANSI: 5 >>>>> usb 2-1.8: new full speed USB device using ehci_hcd and address 3 >>>>> usb 2-1.8: configuration #0 chosen from 1 choice >>>>> usb 2-1.8: config 0 descriptor?? >>>>> ata4: SATA link down (SStatus 0 SControl 300) >>>>> ata5: SATA link down (SStatus 0 SControl 300) >>>>> ata6: SATA link down (SStatus 0 SControl 300) >>>>> device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com >>>>> kjournald starting. Commit interval 15 seconds >>>>> EXT3-fs: mounted filesystem with ordered data mode. >>>>> input: PC Speaker as /class/input/input2 >>>>> Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled >>>>> serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 >>>>> 0000:00:16.3: ttyS0 at I/O 0x40e0 (irq = 17) is a 16550A >>>>> e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-NAPI >>>>> e1000e: Copyright(c) 1999 - 2010 Intel Corporation. >>>>> e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 >>>>> e1000e 0000:00:19.0: setting latency timer to 64 >>>>> e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X >>>>> rtc_cmos 00:06: RTC can wake from S4 >>>>> rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 >>>>> rtc0: alarms up to one year, y3k, 242 bytes nvram >>>>> parport_pc 00:08: activated >>>>> parport_pc 00:08: reported by Plug and Play ACPI >>>>> parport_pc 00:08: disabled >>>>> e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) d4:be:d9:0f:d0:6c >>>>> e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection >>>>> e1000e 0000:00:19.0: eth0: MAC: 11, PHY: 11, PBA No: 3041FF-0FF >>>>> i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >>>>> ACPI: I/O resource 0000:00:1f.3 [0x4040-0x405f] conflicts with ACPI region SMBI [0x4040-0x404f] >>>>> ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver >>>>> ACPI: SSDT cadd7798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903) >>>>> ACPI: SSDT cadd8a98 00303 (v01 PmRef ApIst 00003000 INTL 20090903) >>>>> ACPI: SSDT cadd6d98 00119 (v01 PmRef ApCst 00003000 INTL 20090903) >>>>> input: Lid Switch as /class/input/input3 >>>>> ACPI: Lid Switch [LID] >>>>> input: Power Button as /class/input/input4 >>>>> ACPI: Power Button [PBTN] >>>>> input: Sleep Button as /class/input/input5 >>>>> ACPI: Sleep Button [SBTN] >>>>> input: Power Button as /class/input/input6 >>>>> ACPI: Power Button [PWRF] >>>>> thermal LNXTHERM:01: registered as thermal_zone0 >>>>> ACPI: Thermal Zone [THM] (25 C) >>>>> sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray >>>>> Uniform CD-ROM driver Revision: 3.20 >>>>> sr 1:0:0:0: Attached scsi CD-ROM sr0 >>>>> Compat-wireless backport release: compat-wireless-v3.4-rc1-2 >>>>> Backport based on linux-stable.git v3.4-rc1 >>>>> cfg80211: Calling CRDA to update world regulatory domain >>>>> ACPI: AC Adapter [AC] (on-line) >>>>> sd 0:0:0:0: Attached scsi generic sg0 type 0 >>>>> sr 1:0:0:0: Attached scsi generic sg1 type 5 >>>>> ACPI: Battery Slot [BAT0] (battery present) >>>>> ACPI: Battery Slot [BAT1] (battery absent) >>>>> ACPI: Battery Slot [BAT2] (battery absent) >>>>> Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: >>>>> Copyright(c) 2003-2012 Intel Corporation >>>>> iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>>>> iwlwifi 0000:02:00.0: setting latency timer to 64 >>>>> iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 >>>>> iwlwifi 0000:02:00.0: pci_resource_base = f2478000 >>>>> iwlwifi 0000:02:00.0: HW Revision ID = 0x34 >>>>> iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X >>>>> acpi device:37: registered as cooling_device8 >>>>> input: Video Bus as /class/input/input7 >>>>> ACPI: Video Device [VID] (multi-head: yes rom: no post: no) >>>>> Non-volatile memory driver v1.3 >>>>> lp: driver loaded but no devices found >>>>> md: Autodetecting RAID arrays. >>>>> md: Scanned 0 and added 0 devices. >>>>> md: autorun ... >>>>> md: ... autorun DONE. >>>>> EXT3 FS on sda1, internal journal >>>>> ISO 9660 Extensions: Microsoft Joliet Level 3 >>>>> ISO 9660 Extensions: RRIP_1991A >>>>> Adding 524280k swap on /var/swap/swap.001. Priority:-1 extents:137 across:637248k >>>>> Microcode Update Driver: v2.00-xen <tigran@aivazian.fsnet.co.uk>, Peter Oruba >>>>> Microcode Update Driver: v2.00-xen removed. >>>>> ip_tables: (C) 2000-2006 Netfilter Core Team >>>>> nf_conntrack version 0.5.0 (12157 buckets, 48628 max) >>>>> e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X >>>>> e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X >>>>> 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> >>>>> All bugs added by David S. Miller <davem@redhat.com> >>>>> device xenbr0 entered promiscuous mode >>>>> device eth0 entered promiscuous mode >>>>> e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX >>>>> e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO >>>>> RPC: Registered udp transport module. >>>>> RPC: Registered tcp transport module. >>>>> RPC: Registered tcp NFSv4.1 backchannel transport module. >>>>> warning: `ntpdate' uses 32-bit capabilities (legacy support in use) >>>>> suspend: event channel 38 >>>>> kjournald starting. Commit interval 15 seconds >>>>> EXT3 FS on dm-0, internal journal >>>>> EXT3-fs: mounted filesystem with ordered data mode. >>>>> iwlwifi 0000:02:00.0: ea4b7e1c >>>>> iwlwifi 0000:02:00.0: ca253e1c >>>>> iwlwifi 0000:02:00.0: ca253de8 >>>>> iwlwifi 0000:02:00.0: PCI INT A disabled >>>>> >>>>> >>>> >>>> Ok, can you please set all the debug flags. Since nothing happens here >>>> we shouldn't' see that many debug prints: >>>> >>>> modprobe iwlwifi debug=0xffffffff >>>> > modinfo iwlwifi ? also please used modprobe -r iwlwifi instead of rmmod. It will remove also the modules on which iwlwifi depends (mac80211 etc...) While this is not critical it is a bit cleaner to me. ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-19 7:45 ` Emmanuel Grumbach @ 2012-04-19 7:49 ` Dominik Feser 2012-04-19 7:54 ` Emmanuel Grumbach 0 siblings, 1 reply; 48+ messages in thread From: Dominik Feser @ 2012-04-19 7:49 UTC (permalink / raw) To: Emmanuel Grumbach Cc: Dominik Feser, Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy Here is the output! And by the way, I really appreciate your help! Thank you! # modinfo iwlwifi filename: /lib/modules/2.6.32.12-0.7.1/updates/drivers/net/wireless/iwlwifi/iwlwifi.ko alias: iwlagn license: GPL author: Copyright(c) 2003-2012 Intel Corporation <ilw@linux.intel.com> version: in-tree: description: Intel(R) Wireless WiFi Link AGN driver for Linux firmware: iwlwifi-5150-2.ucode firmware: iwlwifi-5000-5.ucode firmware: iwlwifi-6000g2b-6.ucode firmware: iwlwifi-6000g2a-6.ucode firmware: iwlwifi-6050-5.ucode firmware: iwlwifi-6000-4.ucode firmware: iwlwifi-100-6.ucode firmware: iwlwifi-1000-6.ucode firmware: iwlwifi-135-6.ucode firmware: iwlwifi-105-6.ucode firmware: iwlwifi-2030-6.ucode firmware: iwlwifi-2000-6.ucode srcversion: 169044416CC2B674049889B alias: pci:v00008086d00000892sv*sd00000462bc*sc*i* alias: pci:v00008086d00000893sv*sd00000262bc*sc*i* alias: pci:v00008086d00000892sv*sd00000062bc*sc*i* alias: pci:v00008086d00000894sv*sd00000822bc*sc*i* alias: pci:v00008086d00000894sv*sd00000422bc*sc*i* alias: pci:v00008086d00000895sv*sd00000222bc*sc*i* alias: pci:v00008086d00000894sv*sd00000022bc*sc*i* alias: pci:v00008086d0000088Esv*sd00004860bc*sc*i* alias: pci:v00008086d0000088Esv*sd00004460bc*sc*i* alias: pci:v00008086d0000088Fsv*sd00004260bc*sc*i* alias: pci:v00008086d0000088Esv*sd00004060bc*sc*i* alias: pci:v00008086d00000887sv*sd00004462bc*sc*i* alias: pci:v00008086d00000888sv*sd00004262bc*sc*i* alias: pci:v00008086d00000887sv*sd00004062bc*sc*i* alias: pci:v00008086d00000890sv*sd00004822bc*sc*i* alias: pci:v00008086d00000890sv*sd00004422bc*sc*i* alias: pci:v00008086d00000891sv*sd00004222bc*sc*i* alias: pci:v00008086d00000890sv*sd00004022bc*sc*i* alias: pci:v00008086d00000896sv*sd00005027bc*sc*i* alias: pci:v00008086d00000896sv*sd00005025bc*sc*i* alias: pci:v00008086d00000897sv*sd00005017bc*sc*i* alias: pci:v00008086d00000897sv*sd00005015bc*sc*i* alias: pci:v00008086d00000896sv*sd00005007bc*sc*i* alias: pci:v00008086d00000896sv*sd00005005bc*sc*i* alias: pci:v00008086d000008AEsv*sd00001027bc*sc*i* alias: pci:v00008086d000008AEsv*sd00001025bc*sc*i* alias: pci:v00008086d000008AFsv*sd00001017bc*sc*i* alias: pci:v00008086d000008AFsv*sd00001015bc*sc*i* alias: pci:v00008086d000008AEsv*sd00001007bc*sc*i* alias: pci:v00008086d000008AEsv*sd00001005bc*sc*i* alias: pci:v00008086d00000084sv*sd00001316bc*sc*i* alias: pci:v00008086d00000084sv*sd00001216bc*sc*i* alias: pci:v00008086d00000083sv*sd00001326bc*sc*i* alias: pci:v00008086d00000083sv*sd00001226bc*sc*i* alias: pci:v00008086d00000083sv*sd00001306bc*sc*i* alias: pci:v00008086d00000083sv*sd00001206bc*sc*i* alias: pci:v00008086d00000084sv*sd00001315bc*sc*i* alias: pci:v00008086d00000084sv*sd00001215bc*sc*i* alias: pci:v00008086d00000083sv*sd00001325bc*sc*i* alias: pci:v00008086d00000083sv*sd00001225bc*sc*i* alias: pci:v00008086d00000083sv*sd00001305bc*sc*i* alias: pci:v00008086d00000083sv*sd00001205bc*sc*i* alias: pci:v00008086d00000886sv*sd00001317bc*sc*i* alias: pci:v00008086d00000886sv*sd00001315bc*sc*i* alias: pci:v00008086d00000885sv*sd00001327bc*sc*i* alias: pci:v00008086d00000885sv*sd00001325bc*sc*i* alias: pci:v00008086d00000885sv*sd00001307bc*sc*i* alias: pci:v00008086d00000885sv*sd00001305bc*sc*i* alias: pci:v00008086d00000089sv*sd00001316bc*sc*i* alias: pci:v00008086d00000089sv*sd00001311bc*sc*i* alias: pci:v00008086d00000087sv*sd00001326bc*sc*i* alias: pci:v00008086d00000087sv*sd00001321bc*sc*i* alias: pci:v00008086d00000087sv*sd00001306bc*sc*i* alias: pci:v00008086d00000087sv*sd00001301bc*sc*i* alias: pci:v00008086d00000091sv*sd00005226bc*sc*i* alias: pci:v00008086d00000091sv*sd00005225bc*sc*i* alias: pci:v00008086d00000091sv*sd00005221bc*sc*i* alias: pci:v00008086d00000091sv*sd00005207bc*sc*i* alias: pci:v00008086d00000091sv*sd00005206bc*sc*i* alias: pci:v00008086d00000091sv*sd00005205bc*sc*i* alias: pci:v00008086d00000091sv*sd00005201bc*sc*i* alias: pci:v00008086d00000090sv*sd00005216bc*sc*i* alias: pci:v00008086d00000090sv*sd00005215bc*sc*i* alias: pci:v00008086d00000090sv*sd00005211bc*sc*i* alias: pci:v00008086d0000008Bsv*sd00005317bc*sc*i* alias: pci:v00008086d0000008Bsv*sd00005315bc*sc*i* alias: pci:v00008086d0000008Asv*sd00005327bc*sc*i* alias: pci:v00008086d0000008Asv*sd00005325bc*sc*i* alias: pci:v00008086d0000008Asv*sd00005307bc*sc*i* alias: pci:v00008086d0000008Asv*sd00005305bc*sc*i* alias: pci:v00008086d00000082sv*sd00001305bc*sc*i* alias: pci:v00008086d00000082sv*sd00001304bc*sc*i* alias: pci:v00008086d00000082sv*sd00004820bc*sc*i* alias: pci:v00008086d00000085sv*sd0000C220bc*sc*i* alias: pci:v00008086d00000082sv*sd0000C020bc*sc*i* alias: pci:v00008086d00000085sv*sd00001316bc*sc*i* alias: pci:v00008086d00000085sv*sd00001311bc*sc*i* alias: pci:v00008086d00000082sv*sd00001326bc*sc*i* alias: pci:v00008086d00000082sv*sd00001321bc*sc*i* alias: pci:v00008086d00000082sv*sd00001307bc*sc*i* alias: pci:v00008086d00000082sv*sd00001306bc*sc*i* alias: pci:v00008086d00000082sv*sd00001301bc*sc*i* alias: pci:v00008086d00004239sv*sd00001316bc*sc*i* alias: pci:v00008086d00004239sv*sd00001311bc*sc*i* alias: pci:v00008086d00004238sv*sd00001111bc*sc*i* alias: pci:v00008086d0000422Csv*sd00001326bc*sc*i* alias: pci:v00008086d0000422Csv*sd00001321bc*sc*i* alias: pci:v00008086d0000422Csv*sd00001307bc*sc*i* alias: pci:v00008086d0000422Csv*sd00001306bc*sc*i* alias: pci:v00008086d0000422Csv*sd00001301bc*sc*i* alias: pci:v00008086d0000422Bsv*sd00001121bc*sc*i* alias: pci:v00008086d0000422Bsv*sd00001101bc*sc*i* alias: pci:v00008086d0000423Dsv*sd00001316bc*sc*i* alias: pci:v00008086d0000423Dsv*sd00001216bc*sc*i* alias: pci:v00008086d0000423Dsv*sd00001311bc*sc*i* alias: pci:v00008086d0000423Dsv*sd00001211bc*sc*i* alias: pci:v00008086d0000423Csv*sd00001321bc*sc*i* alias: pci:v00008086d0000423Csv*sd00001221bc*sc*i* alias: pci:v00008086d0000423Csv*sd00001306bc*sc*i* alias: pci:v00008086d0000423Csv*sd00001206bc*sc*i* alias: pci:v00008086d0000423Csv*sd00001301bc*sc*i* alias: pci:v00008086d0000423Csv*sd00001201bc*sc*i* alias: pci:v00008086d0000423Bsv*sd00001011bc*sc*i* alias: pci:v00008086d0000423Asv*sd00001021bc*sc*i* alias: pci:v00008086d0000423Asv*sd00001001bc*sc*i* alias: pci:v00008086d00004236sv*sd00001114bc*sc*i* alias: pci:v00008086d00004236sv*sd00001014bc*sc*i* alias: pci:v00008086d00004236sv*sd00001111bc*sc*i* alias: pci:v00008086d00004236sv*sd00001011bc*sc*i* alias: pci:v00008086d00004235sv*sd00001104bc*sc*i* alias: pci:v00008086d00004235sv*sd00001004bc*sc*i* alias: pci:v00008086d00004235sv*sd00001101bc*sc*i* alias: pci:v00008086d00004235sv*sd00001001bc*sc*i* alias: pci:v00008086d00004235sv*sd00001124bc*sc*i* alias: pci:v00008086d00004235sv*sd00001024bc*sc*i* alias: pci:v00008086d00004235sv*sd00001121bc*sc*i* alias: pci:v00008086d00004235sv*sd00001021bc*sc*i* alias: pci:v00008086d00004237sv*sd00001316bc*sc*i* alias: pci:v00008086d00004237sv*sd00001216bc*sc*i* alias: pci:v00008086d00004237sv*sd00001315bc*sc*i* alias: pci:v00008086d00004237sv*sd00001215bc*sc*i* alias: pci:v00008086d00004237sv*sd00001314bc*sc*i* alias: pci:v00008086d00004237sv*sd00001214bc*sc*i* alias: pci:v00008086d00004237sv*sd00001311bc*sc*i* alias: pci:v00008086d00004237sv*sd00001211bc*sc*i* alias: pci:v00008086d00004232sv*sd00001326bc*sc*i* alias: pci:v00008086d00004232sv*sd00001226bc*sc*i* alias: pci:v00008086d00004232sv*sd00001325bc*sc*i* alias: pci:v00008086d00004232sv*sd00001225bc*sc*i* alias: pci:v00008086d00004232sv*sd00001324bc*sc*i* alias: pci:v00008086d00004232sv*sd00001224bc*sc*i* alias: pci:v00008086d00004232sv*sd00001321bc*sc*i* alias: pci:v00008086d00004232sv*sd00001221bc*sc*i* alias: pci:v00008086d00004232sv*sd00001306bc*sc*i* alias: pci:v00008086d00004232sv*sd00001206bc*sc*i* alias: pci:v00008086d00004232sv*sd00001305bc*sc*i* alias: pci:v00008086d00004232sv*sd00001205bc*sc*i* alias: pci:v00008086d00004232sv*sd00001304bc*sc*i* alias: pci:v00008086d00004232sv*sd00001204bc*sc*i* alias: pci:v00008086d00004232sv*sd00001301bc*sc*i* alias: pci:v00008086d00004232sv*sd00001201bc*sc*i* depends: mac80211,compat,led-class,cfg80211,compat_firmware_class vermagic: 2.6.32.12-0.7.1 SMP mod_unload modversions Xen 686 parm: swcrypto:using crypto in software (default 0 [hardware]) (int) parm: 11n_disable:disable 11n functionality, bitmap: 1: full, 2: agg TX, 4: agg RX (uint) parm: amsdu_size_8K:enable 8K amsdu size (int) parm: fw_restart:restart firmware in case of error (int) parm: ucode_alternative:specify ucode alternative to use from ucode file (int) parm: antenna_coupling:specify antenna coupling in dB (defualt: 0 dB) (int) parm: bt_ch_inhibition:Enable BT channel inhibition (default: enable) (bool) parm: plcp_check:Check plcp health (default: 1 [enabled]) (bool) parm: ack_check:Check ack health (default: 0 [disabled]) (bool) parm: wd_disable:Disable stuck queue watchdog timer 0=system default, 1=disable, 2=enable (default: 0) (int) parm: bt_coex_active:enable wifi/bt co-exist (default: enable) (bool) parm: led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int) parm: power_save:enable WiFi power management (default: disable) (bool) parm: power_level:default power save level (range from 1 - 5, default: 1) (int) parm: auto_agg:enable agg w/o check traffic load (default: enable) (bool) parm: no_sleep_autoadjust:don't automatically adjust sleep level according to maximum network latency (default: true) (bool) Am 19.04.2012 um 09:45 schrieb Emmanuel Grumbach: > On Thu, Apr 19, 2012 at 10:25, Dominik Feser > <dominik.feser@googlemail.com> wrote: >> Ok, I just wanted to clarify that. >> I changed my .config file to: >> >> # cat .config >> export CONFIG_COMPAT_KERNEL_2_6_33=y >> export CONFIG_COMPAT_KERNEL_2_6_34=y >> export CONFIG_COMPAT_KERNEL_2_6_35=y >> export CONFIG_COMPAT_KERNEL_2_6_36=y >> export CONFIG_COMPAT_KERNEL_2_6_37=y >> export CONFIG_COMPAT_KERNEL_2_6_38=y >> export CONFIG_COMPAT_KERNEL_2_6_39=y >> export CONFIG_COMPAT_KERNEL_3_0=y >> export CONFIG_COMPAT_KERNEL_3_1=y >> export CONFIG_COMPAT_KERNEL_3_2=y >> export CONFIG_COMPAT_KERNEL_3_3=y >> export CONFIG_COMPAT_KERNEL_3_4=y >> export CONFIG_COMPAT_KERNEL_3_5=y >> export CONFIG_COMPAT_FIRMWARE_CLASS=m >> export CONFIG_COMPAT_KFIFO=y >> export CONFIG_IWLWIFI_DEBUG=y >> >> And after making the driver I copied the new iwlwifi.ko into /lib/modules/2.6.32.12-0.7.1/updates/drivers/net/wireless/iwlwifi/. Then I did an rmmod iwlwifi and an modprobe iwlwifi debug=0xffffffff but: >> >> # modprobe iwlwifi debug=0xffffffff >> FATAL: Error inserting iwlwifi (/lib/modules/2.6.32.12-0.7.1/updates/drivers/net/wireless/iwlwifi/iwlwifi.ko): Unknown symbol in module, or unknown parameter (see dmesg) >> >> dmesg shows iwlwifi: Unknown parameter `debug' >> >> >> >> >> >> Am 18.04.2012 um 21:33 schrieb Emmanuel Grumbach: >> >>> On Wed, Apr 18, 2012 at 22:28, Dominik Feser >>> <dominik.feser@googlemail.com> wrote: >>>> Thumb question but how do I compile the driver with debug support? I think its missing... >>>> In which file do I have to enable the debug stuff? >>>> >>>> # modprobe iwlwifi debug=0xffffffff >>>> FATAL: Error inserting iwlwifi (/lib/modules/2.6.32.12-0.7.1/updates/drivers/net/wireless/iwlwifi/iwlwifi.ko): Unknown symbol in module, or unknown parameter (see dmesg) >>>> >>>> >>> >>> You need to enable CONFIG_IWLWIFI_DEBUG in your .config file. >>> >>>> >>>> Am 18.04.2012 um 21:25 schrieb Emmanuel Grumbach: >>>> >>>>> On Wed, Apr 18, 2012 at 19:56, Dominik Feser >>>>> <dominik.feser@googlemail.com> wrote: >>>>>> OK, that was the firmware I had tried before. I deleted it because it did not work, too. >>>>>> >>>>>> Here is the output you wanted: >>>>>> # ls /lib/firmware/iwlwifi-6000* >>>>>> /lib/firmware/iwlwifi-6000g2a-5.ucode >>>>>> >>>>>> After copying the firmware there again and rebooting dmesg looks like this: >>>>>> # dmesg | grep iwl >>>>>> iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>>>>> iwlwifi 0000:02:00.0: setting latency timer to 64 >>>>>> iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 >>>>>> iwlwifi 0000:02:00.0: pci_resource_base = f2478000 >>>>>> iwlwifi 0000:02:00.0: HW Revision ID = 0x34 >>>>>> iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X >>>>>> iwlwifi 0000:02:00.0: ea4b7e1c >>>>>> >>>>>> Still no wlan0 for me... >>>>>> >>>>>> Full dmesg: >>>>>> # dmesg >>>>>> Reserving virtual address space above 0xff400000 >>>>>> Linux version 2.6.32.12-0.7.1 (geeko@buildhost) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #6 SMP Mon Apr 16 19:31:06 EDT 2012 >>>>>> KERNEL supported cpus: >>>>>> Intel GenuineIntel >>>>>> AMD AuthenticAMD >>>>>> NSC Geode by NSC >>>>>> Cyrix CyrixInstead >>>>>> Centaur CentaurHauls >>>>>> Transmeta GenuineTMx86 >>>>>> Transmeta TransmetaCPU >>>>>> Xen-provided machine memory map: >>>>>> BIOS: 0000000000000000 - 000000000009a800 (usable) >>>>>> BIOS: 000000000009a800 - 00000000000a0000 (reserved) >>>>>> BIOS: 00000000000e0000 - 0000000000100000 (reserved) >>>>>> BIOS: 0000000000100000 - 0000000020000000 (usable) >>>>>> BIOS: 0000000020000000 - 0000000020200000 (reserved) >>>>>> BIOS: 0000000020200000 - 0000000040000000 (usable) >>>>>> BIOS: 0000000040000000 - 0000000040200000 (reserved) >>>>>> BIOS: 0000000040200000 - 00000000caa25000 (usable) >>>>>> BIOS: 00000000caa25000 - 00000000caa69000 (reserved) >>>>>> BIOS: 00000000caa69000 - 00000000cadb7000 (usable) >>>>>> BIOS: 00000000cadb7000 - 00000000cade7000 (reserved) >>>>>> BIOS: 00000000cade7000 - 00000000cafe7000 (ACPI NVS) >>>>>> BIOS: 00000000cafe7000 - 00000000cafff000 (ACPI data) >>>>>> BIOS: 00000000cafff000 - 00000000cb000000 (usable) >>>>>> BIOS: 00000000cb800000 - 00000000cfa00000 (reserved) >>>>>> BIOS: 00000000fec00000 - 00000000fec01000 (reserved) >>>>>> BIOS: 00000000fed1c000 - 00000000fed20000 (reserved) >>>>>> BIOS: 00000000fee00000 - 00000000fee01000 (reserved) >>>>>> BIOS: 00000000ffc00000 - 00000000ffc20000 (reserved) >>>>>> BIOS: 0000000100000000 - 000000022e000000 (usable) >>>>>> Xen-provided physical RAM map: >>>>>> Xen: 0000000000000000 - 000000002f800000 (usable) >>>>>> DMI 2.6 present. >>>>>> last_pfn = 0x2f800 max_arch_pfn = 0x10000000 >>>>>> initial memory mapped : 0 - 00000000 >>>>>> init_memory_mapping: 0000000000000000-000000002f800000 >>>>>> NX (Execute Disable) protection: active >>>>>> 0000000000 - 002f800000 page 4k >>>>>> kernel direct mapping tables up to 2f800000 @ e4e000-fcf000 >>>>>> RAMDISK: 005f9000 - 00d80e00 >>>>>> ACPI: RSDP 000fe300 00024 (v02 DELL ) >>>>>> ACPI: XSDT caffde18 0007C (v01 DELL CBX3 06222004 MSFT 00010013) >>>>>> ACPI: FACP caf87d98 000F4 (v04 DELL CBX3 06222004 MSFT 00010013) >>>>>> ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20090903/tbfadt-369) >>>>>> ACPI Warning: 32/64X FACS address mismatch in FADT - CAFE4E40/00000000CAFE4D40, using 32 (20090903/tbfadt-486) >>>>>> ACPI: DSDT caf55018 087F6 (v02 INT430 SYSFexxx 00001001 INTL 20090903) >>>>>> ACPI: FACS cafe4e40 00040 >>>>>> ACPI: APIC caffcf18 000CC (v02 DELL CBX3 06222004 MSFT 00010013) >>>>>> ACPI: TCPA cafe5d18 00032 (v02 00000000 00000000) >>>>>> ACPI: SSDT caf88a98 002F9 (v01 DELLTP TPM 00003000 INTL 20090903) >>>>>> ACPI: MCFG cafe5c98 0003C (v01 DELL SNDYBRDG 06222004 MSFT 00000097) >>>>>> ACPI: HPET cafe5c18 00038 (v01 A M I PCHHPET 06222004 AMI. 00000003) >>>>>> ACPI: BOOT cafe5b98 00028 (v01 DELL CBX3 06222004 AMI 00010013) >>>>>> ACPI: SSDT caf6c018 00888 (v01 PmRef Cpu0Ist 00003000 INTL 20090903) >>>>>> ACPI: SSDT caf6b018 00996 (v01 PmRef CpuPm 00003000 INTL 20090903) >>>>>> ACPI: XMAR caf87c18 000E8 (v01 INTEL SNB 00000001 INTL 00000001) >>>>>> ACPI: SLIC caf75c18 00176 (v03 DELL CBX3 06222004 MSFT 00010013) >>>>>> 0MB HIGHMEM available. >>>>>> 760MB LOWMEM available. >>>>>> mapped low ram: 0 - 2f800000 >>>>>> low ram: 0 - 2f800000 >>>>>> node 0 low ram: 00000000 - 2f000000 >>>>>> node 0 bootmap 00000000 - 00005e00 >>>>>> (5 early reservations) ==> bootmem [0000000000 - 002f000000] >>>>>> #0 [0000100000 - 00005d8284] TEXT DATA BSS ==> [0000100000 - 00005d8284] >>>>>> #1 [00005f9000 - 0000e4e000] Xen provided ==> [00005f9000 - 0000e4e000] >>>>>> #2 [00005d9000 - 00005d91b3] BRK ==> [00005d9000 - 00005d91b3] >>>>>> #3 [0000e4e000 - 0000fc4000] PGTABLE ==> [0000e4e000 - 0000fc4000] >>>>>> #4 [0000000000 - 0000006000] BOOTMAP ==> [0000000000 - 0000006000] >>>>>> found SMP MP-table at [ff3eca70] 000f1a70 >>>>>> Zone PFN ranges: >>>>>> DMA 0x00000000 -> 0x00001000 >>>>>> Normal 0x00001000 -> 0x0002f800 >>>>>> HighMem 0x0002f800 -> 0x0002f800 >>>>>> Movable zone start PFN for each node >>>>>> early_node_map[2] active PFN ranges >>>>>> 0: 0x00000000 -> 0x0002f000 >>>>>> 0: 0x0002f800 -> 0x0002f800 >>>>>> On node 0 totalpages: 192512 >>>>>> free_area_init_node: node 0, pgdat c04ef300, node_mem_map c1002000 >>>>>> DMA zone: 32 pages used for memmap >>>>>> DMA zone: 0 pages reserved >>>>>> DMA zone: 4064 pages, LIFO batch:0 >>>>>> Normal zone: 1488 pages used for memmap >>>>>> Normal zone: 186928 pages, LIFO batch:31 >>>>>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >>>>>> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) >>>>>> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) >>>>>> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) >>>>>> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled) >>>>>> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled) >>>>>> ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled) >>>>>> ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled) >>>>>> ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled) >>>>>> ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled) >>>>>> ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled) >>>>>> ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled) >>>>>> ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled) >>>>>> ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled) >>>>>> ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled) >>>>>> ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled) >>>>>> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) >>>>>> IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 >>>>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >>>>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >>>>>> ACPI: IRQ0 used by override. >>>>>> ACPI: IRQ2 used by override. >>>>>> ACPI: IRQ9 used by override. >>>>>> Using ACPI (MADT) for SMP configuration information >>>>>> Allocating PCI resources starting at cfa00000 (gap: cfa00000:2f200000) >>>>>> NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 >>>>>> PERCPU: Embedded 9 pages/cpu @c16b9000 s13720 r0 d23144 u65536 >>>>>> pcpu-alloc: s13720 r0 d23144 u65536 alloc=16*4096 >>>>>> pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 >>>>>> Swapping MFNs for PFN 544 and 16bb (MFN c9544 and c9f33) >>>>>> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 190992 >>>>>> Kernel command line: root=LABEL=root-hwkkxaxy ro xencons=hvc console=hvc0 console=tty0 quiet vga=785 splash >>>>>> PID hash table entries: 4096 (order: 2, 16384 bytes) >>>>>> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) >>>>>> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) >>>>>> Enabling fast FPU save and restore... done. >>>>>> Enabling unmasked SIMD FPU exception support... done. >>>>>> Initializing CPU#0 >>>>>> Software IO TLB enabled: >>>>>> Aperture: 64 megabytes >>>>>> Address size: 28 bits >>>>>> Kernel range: c17b2000 - c57b2000 >>>>>> PCI-DMA: Using software bounce buffering for IO (SWIOTLB) >>>>>> Initializing HighMem for node 0 (00000000:00000000) >>>>>> Memory: 681820k/778240k available (2591k kernel code, 88012k reserved, 1466k data, 316k init, 0k highmem) >>>>>> virtual kernel memory layout: >>>>>> fixmap : 0xff077000 - 0xff3ff000 (3616 kB) >>>>>> pkmap : 0xfec00000 - 0xfee00000 (2048 kB) >>>>>> vmalloc : 0xf0000000 - 0xfebfe000 ( 235 MB) >>>>>> lowmem : 0xc0000000 - 0xef800000 ( 760 MB) >>>>>> .init : 0xc04f7000 - 0xc0546000 ( 316 kB) >>>>>> .data : 0xc0387d67 - 0xc04f66f8 (1466 kB) >>>>>> .text : 0xc0100000 - 0xc0387d67 (2591 kB) >>>>>> Checking if this processor honours the WP bit even in supervisor mode...Ok. >>>>>> Hierarchical RCU implementation. >>>>>> NR_IRQS:2048 >>>>>> Extended CMOS year: 2000 >>>>>> Xen reported: 2793.780 MHz processor. >>>>>> Console: colour dummy device 80x25 >>>>>> console [tty0] enabled >>>>>> console [hvc0] enabled >>>>>> Calibrating delay using timer specific routine.. 5616.72 BogoMIPS (lpj=28083614) >>>>>> pid_max: default: 32768 minimum: 301 >>>>>> Security Framework initialized >>>>>> Mount-cache hash table entries: 512 >>>>>> mce: CPU supports 7 MCE banks >>>>>> Checking 'hlt' instruction... OK. >>>>>> SMP alternatives: switching to UP code >>>>>> ACPI: Core revision 20090903 >>>>>> SMP alternatives: switching to SMP code >>>>>> Initializing CPU#1 >>>>>> Initializing CPU#2 >>>>>> Brought up 4 CPUs >>>>>> Initializing CPU#3 >>>>>> Grant table version 2 >>>>>> NET: Registered protocol family 16 >>>>>> ACPI FADT declares the system doesn't support PCIe ASPM, so disable it >>>>>> ACPI: bus type pci registered >>>>>> PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 >>>>>> PCI: Not using MMCONFIG. >>>>>> PCI: Using configuration type 1 for base access >>>>>> bio: create slab <bio-0> at 0 >>>>>> ACPI: EC: Look up EC in DSDT >>>>>> ACPI: BIOS _OSI(Linux) query ignored >>>>>> ACPI: BIOS _OSI(Linux) query ignored >>>>>> ACPI: Interpreter enabled >>>>>> ACPI: (supports S0 S5) >>>>>> ACPI: Using IOAPIC for interrupt routing >>>>>> PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 >>>>>> PCI: MCFG area at f8000000 reserved in ACPI motherboard resources >>>>>> PCI: Using MMCONFIG for extended config space >>>>>> ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930 >>>>>> ACPI: No dock devices found. >>>>>> PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug >>>>>> _OSC invalid UUID >>>>>> ACPI: PCI Root Bridge [PCI0] (0000:00) >>>>>> pci 0000:00:02.0: reg 10 64bit mmio: [0xe1400000-0xe17fffff] >>>>>> pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff] >>>>>> pci 0000:00:02.0: reg 20 io port: [0x4000-0x403f] >>>>>> pci 0000:00:16.0: reg 10 64bit mmio: [0xe2eb0000-0xe2eb000f] >>>>>> pci 0000:00:16.0: PME# supported from D0 D3hot D3cold >>>>>> pci 0000:00:16.0: PME# disabled >>>>>> pci 0000:00:16.3: reg 10 io port: [0x40e0-0x40e7] >>>>>> pci 0000:00:16.3: reg 14 32bit mmio: [0xe2e90000-0xe2e90fff] >>>>>> pci 0000:00:19.0: reg 10 32bit mmio: [0xe2e00000-0xe2e1ffff] >>>>>> pci 0000:00:19.0: reg 14 32bit mmio: [0xe2e80000-0xe2e80fff] >>>>>> pci 0000:00:19.0: reg 18 io port: [0x4080-0x409f] >>>>>> pci 0000:00:19.0: PME# supported from D0 D3hot D3cold >>>>>> pci 0000:00:19.0: PME# disabled >>>>>> pci 0000:00:1a.0: reg 10 32bit mmio: [0xe2e70000-0xe2e703ff] >>>>>> pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold >>>>>> pci 0000:00:1a.0: PME# disabled >>>>>> pci 0000:00:1b.0: reg 10 64bit mmio: [0xe2e60000-0xe2e63fff] >>>>>> pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold >>>>>> pci 0000:00:1b.0: PME# disabled >>>>>> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold >>>>>> pci 0000:00:1c.0: PME# disabled >>>>>> pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold >>>>>> pci 0000:00:1c.1: PME# disabled >>>>>> pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold >>>>>> pci 0000:00:1c.2: PME# disabled >>>>>> pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold >>>>>> pci 0000:00:1c.3: PME# disabled >>>>>> pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold >>>>>> pci 0000:00:1c.5: PME# disabled >>>>>> pci 0000:00:1d.0: reg 10 32bit mmio: [0xe2e50000-0xe2e503ff] >>>>>> pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold >>>>>> pci 0000:00:1d.0: PME# disabled >>>>>> pci 0000:00:1f.2: reg 10 io port: [0x40d0-0x40d7] >>>>>> pci 0000:00:1f.2: reg 14 io port: [0x40c0-0x40c3] >>>>>> pci 0000:00:1f.2: reg 18 io port: [0x40b0-0x40b7] >>>>>> pci 0000:00:1f.2: reg 1c io port: [0x40a0-0x40a3] >>>>>> pci 0000:00:1f.2: reg 20 io port: [0x4060-0x407f] >>>>>> pci 0000:00:1f.2: reg 24 32bit mmio: [0xe2e40000-0xe2e407ff] >>>>>> pci 0000:00:1f.2: PME# supported from D3hot >>>>>> pci 0000:00:1f.2: PME# disabled >>>>>> pci 0000:00:1f.3: reg 10 64bit mmio: [0xe2e30000-0xe2e300ff] >>>>>> pci 0000:00:1f.3: reg 20 io port: [0x4040-0x405f] >>>>>> pci 0000:00:1c.0: PCI bridge to [bus 01-01] >>>>>> pci 0000:02:00.0: reg 10 64bit mmio: [0xe2d00000-0xe2d01fff] >>>>>> pci 0000:02:00.0: PME# supported from D0 D3hot D3cold >>>>>> pci 0000:02:00.0: PME# disabled >>>>>> pci 0000:00:1c.1: PCI bridge to [bus 02-02] >>>>>> pci 0000:00:1c.1: bridge 32bit mmio: [0xe2d00000-0xe2dfffff] >>>>>> pci 0000:00:1c.2: PCI bridge to [bus 03-08] >>>>>> pci 0000:00:1c.2: bridge io port: [0x3000-0x3fff] >>>>>> pci 0000:00:1c.2: bridge 32bit mmio: [0xe2200000-0xe2bfffff] >>>>>> pci 0000:00:1c.2: bridge 64bit mmio pref: [0xe0a00000-0xe13fffff] >>>>>> pci 0000:00:1c.3: PCI bridge to [bus 09-09] >>>>>> pci 0000:00:1c.3: bridge io port: [0x2000-0x2fff] >>>>>> pci 0000:00:1c.3: bridge 32bit mmio: [0xe1800000-0xe21fffff] >>>>>> pci 0000:00:1c.3: bridge 64bit mmio pref: [0xe0000000-0xe09fffff] >>>>>> pci 0000:0a:00.0: reg 10 32bit mmio: [0xe2c20000-0xe2c201ff] >>>>>> pci 0000:0a:00.0: supports D1 D2 >>>>>> pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold >>>>>> pci 0000:0a:00.0: PME# disabled >>>>>> pci 0000:0a:00.1: reg 10 32bit mmio: [0xe2c10000-0xe2c10fff] >>>>>> pci 0000:0a:00.1: reg 18 32bit mmio: [0xe2c00000-0xe2c007ff] >>>>>> pci 0000:0a:00.1: supports D1 D2 >>>>>> pci 0000:0a:00.1: PME# supported from D0 D1 D2 D3hot D3cold >>>>>> pci 0000:0a:00.1: PME# disabled >>>>>> pci 0000:00:1c.5: PCI bridge to [bus 0a-0a] >>>>>> pci 0000:00:1c.5: bridge 32bit mmio: [0xe2c00000-0xe2cfffff] >>>>>> pci_bus 0000:00: on NUMA node 0 >>>>>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >>>>>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] >>>>>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] >>>>>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] >>>>>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] >>>>>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] >>>>>> _OSC invalid UUID >>>>>> ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 >>>>>> ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 >>>>>> ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 >>>>>> ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 >>>>>> ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15) >>>>>> ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. >>>>>> ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15) >>>>>> ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. >>>>>> xen_mem: Initialising balloon driver. >>>>>> vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none >>>>>> vgaarb: loaded >>>>>> PCI: Using ACPI for IRQ routing >>>>>> Switching to clocksource xen >>>>>> pnp: PnP ACPI init >>>>>> ACPI: bus type pnp registered >>>>>> pnp: PnP ACPI: found 13 devices >>>>>> ACPI: ACPI bus type pnp unregistered >>>>>> system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved >>>>>> system 00:05: ioport range 0x680-0x69f has been reserved >>>>>> system 00:05: ioport range 0x1000-0x100f has been reserved >>>>>> system 00:05: ioport range 0xffff-0xffff has been reserved >>>>>> system 00:05: ioport range 0xffff-0xffff has been reserved >>>>>> system 00:05: ioport range 0x400-0x47f has been reserved >>>>>> system 00:05: ioport range 0x500-0x57f has been reserved >>>>>> system 00:05: ioport range 0x164e-0x164f has been reserved >>>>>> system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved >>>>>> system 00:0a: iomem range 0xfed10000-0xfed17fff has been reserved >>>>>> system 00:0a: iomem range 0xfed18000-0xfed18fff has been reserved >>>>>> system 00:0a: iomem range 0xfed19000-0xfed19fff has been reserved >>>>>> system 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved >>>>>> system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved >>>>>> system 00:0a: iomem range 0xfed90000-0xfed93fff has been reserved >>>>>> system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved >>>>>> system 00:0a: iomem range 0xff000000-0xffffffff could not be reserved >>>>>> system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved >>>>>> system 00:0c: iomem range 0x20000000-0x201fffff has been reserved >>>>>> system 00:0c: iomem range 0x40000000-0x401fffff has been reserved >>>>>> pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 >>>>>> pci 0000:00:1c.0: IO window: disabled >>>>>> pci 0000:00:1c.0: MEM window: disabled >>>>>> pci 0000:00:1c.0: PREFETCH window: disabled >>>>>> pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 >>>>>> pci 0000:00:1c.1: IO window: disabled >>>>>> pci 0000:00:1c.1: MEM window: 0xe2d00000-0xe2dfffff >>>>>> pci 0000:00:1c.1: PREFETCH window: disabled >>>>>> pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 >>>>>> pci 0000:00:1c.2: IO window: 0x3000-0x3fff >>>>>> pci 0000:00:1c.2: MEM window: 0xe2200000-0xe2bfffff >>>>>> pci 0000:00:1c.2: PREFETCH window: 0x000000e0a00000-0x000000e13fffff >>>>>> pci 0000:00:1c.3: PCI bridge, secondary bus 0000:09 >>>>>> pci 0000:00:1c.3: IO window: 0x2000-0x2fff >>>>>> pci 0000:00:1c.3: MEM window: 0xe1800000-0xe21fffff >>>>>> pci 0000:00:1c.3: PREFETCH window: 0x000000e0000000-0x000000e09fffff >>>>>> pci 0000:00:1c.5: PCI bridge, secondary bus 0000:0a >>>>>> pci 0000:00:1c.5: IO window: disabled >>>>>> pci 0000:00:1c.5: MEM window: 0xe2c00000-0xe2cfffff >>>>>> pci 0000:00:1c.5: PREFETCH window: disabled >>>>>> pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >>>>>> pci 0000:00:1c.0: setting latency timer to 64 >>>>>> pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 >>>>>> pci 0000:00:1c.1: setting latency timer to 64 >>>>>> pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >>>>>> pci 0000:00:1c.2: setting latency timer to 64 >>>>>> pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 >>>>>> pci 0000:00:1c.3: setting latency timer to 64 >>>>>> pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 >>>>>> pci 0000:00:1c.5: setting latency timer to 64 >>>>>> pci_bus 0000:00: resource 0 io: [0x00-0xffff] >>>>>> pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] >>>>>> pci_bus 0000:02: resource 1 mem: [0xe2d00000-0xe2dfffff] >>>>>> pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] >>>>>> pci_bus 0000:03: resource 1 mem: [0xe2200000-0xe2bfffff] >>>>>> pci_bus 0000:03: resource 2 pref mem [0xe0a00000-0xe13fffff] >>>>>> pci_bus 0000:09: resource 0 io: [0x2000-0x2fff] >>>>>> pci_bus 0000:09: resource 1 mem: [0xe1800000-0xe21fffff] >>>>>> pci_bus 0000:09: resource 2 pref mem [0xe0000000-0xe09fffff] >>>>>> pci_bus 0000:0a: resource 1 mem: [0xe2c00000-0xe2cfffff] >>>>>> NET: Registered protocol family 2 >>>>>> IP route cache hash table entries: 32768 (order: 5, 131072 bytes) >>>>>> TCP established hash table entries: 131072 (order: 8, 1048576 bytes) >>>>>> TCP bind hash table entries: 65536 (order: 7, 524288 bytes) >>>>>> TCP: Hash tables configured (established 131072 bind 65536) >>>>>> TCP reno registered >>>>>> NET: Registered protocol family 1 >>>>>> pci 0000:00:02.0: Boot video device >>>>>> Trying to unpack rootfs image as initramfs... >>>>>> Freeing initrd memory: 7711k freed >>>>>> Simple Boot Flag at 0xf3 set to 0x1 >>>>>> MCE: bind virq for DOM0 logging >>>>>> MCE_DOM0_LOG: enter dom0 mce vIRQ handler >>>>>> MCE_DOM0_LOG: No more urgent data >>>>>> MCE_DOM0_LOG: No more nonurgent data >>>>>> VFS: Disk quotas dquot_6.5.2 >>>>>> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) >>>>>> msgmni has been set to 379 >>>>>> alg: No test for stdrng (krng) >>>>>> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) >>>>>> io scheduler noop registered >>>>>> io scheduler anticipatory registered >>>>>> io scheduler deadline registered >>>>>> io scheduler cfq registered (default) >>>>>> vesafb: framebuffer at 0xd0000000, mapped to 0xf0080000, using 1200k, total 65472k >>>>>> vesafb: mode is 640x480x16, linelength=1280, pages=0 >>>>>> vesafb: scrolling: redraw >>>>>> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 >>>>>> fb0: VESA VGA frame buffer device >>>>>> floppy0: Unable to grab DMA2 for the floppy driver >>>>>> floppy0: no floppy controllers found >>>>>> brd: module loaded >>>>>> loop: module loaded >>>>>> Xen virtual console successfully installed as hvc0 >>>>>> Event-channel device installed. >>>>>> blktap_device_init: blktap device major 253 >>>>>> blktap_ring_init: blktap ring major: 253 >>>>>> netfront: Initialising virtual ethernet driver. >>>>>> Uniform Multi-Platform E-IDE driver >>>>>> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 >>>>>> i8042.c: Warning: Keylock active. >>>>>> serio: i8042 KBD port at 0x60,0x64 irq 1 >>>>>> serio: i8042 AUX port at 0x60,0x64 irq 12 >>>>>> mice: PS/2 mouse device common for all mice >>>>>> NET: Registered protocol family 17 >>>>>> registered taskstats version 1 >>>>>> input: AT Translated Set 2 keyboard as /class/input/input0 >>>>>> PCI IO multiplexer device installed. >>>>>> BIOS EDD facility v0.16 2004-Jun-25, 1 devices found >>>>>> Freeing unused kernel memory: 316k freed >>>>>> Console: switching to colour frame buffer device 80x30 >>>>>> usbcore: registered new interface driver usbfs >>>>>> usbcore: registered new interface driver hub >>>>>> usbcore: registered new device driver usb >>>>>> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver >>>>>> ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >>>>>> ehci_hcd 0000:00:1a.0: setting latency timer to 64 >>>>>> ehci_hcd 0000:00:1a.0: EHCI Host Controller >>>>>> ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 >>>>>> ehci_hcd 0000:00:1a.0: debug port 2 >>>>>> ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported >>>>>> ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe2e70000 >>>>>> ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 >>>>>> usb usb1: configuration #1 chosen from 1 choice >>>>>> hub 1-0:1.0: USB hub found >>>>>> hub 1-0:1.0: 3 ports detected >>>>>> ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>>>>> ehci_hcd 0000:00:1d.0: setting latency timer to 64 >>>>>> ehci_hcd 0000:00:1d.0: EHCI Host Controller >>>>>> ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 >>>>>> ehci_hcd 0000:00:1d.0: debug port 2 >>>>>> ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported >>>>>> ehci_hcd 0000:00:1d.0: irq 17, io mem 0xe2e50000 >>>>>> ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 >>>>>> usb usb2: configuration #1 chosen from 1 choice >>>>>> hub 2-0:1.0: USB hub found >>>>>> hub 2-0:1.0: 3 ports detected >>>>>> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver >>>>>> uhci_hcd: USB Universal Host Controller Interface driver >>>>>> SCSI subsystem initialized >>>>>> libata version 3.00 loaded. >>>>>> ahci 0000:00:1f.2: version 3.0 >>>>>> ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >>>>>> ahci 0000:00:1f.2: irq 1279 (279) for MSI/MSI-X >>>>>> ahci: SSS flag set, parallel bus scan disabled >>>>>> ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode >>>>>> ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst >>>>>> ahci 0000:00:1f.2: setting latency timer to 64 >>>>>> scsi0 : ahci >>>>>> scsi1 : ahci >>>>>> scsi2 : ahci >>>>>> scsi3 : ahci >>>>>> scsi4 : ahci >>>>>> scsi5 : ahci >>>>>> ata1: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40100 irq 1279 >>>>>> ata2: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40180 irq 1279 >>>>>> ata3: DUMMY >>>>>> ata4: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40280 irq 1279 >>>>>> ata5: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40300 irq 1279 >>>>>> ata6: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40380 irq 1279 >>>>>> input: PS/2 Generic Mouse as /class/input/input1 >>>>>> usb 1-1: new high speed USB device using ehci_hcd and address 2 >>>>>> usb 1-1: configuration #1 chosen from 1 choice >>>>>> hub 1-1:1.0: USB hub found >>>>>> hub 1-1:1.0: 6 ports detected >>>>>> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >>>>>> usb 2-1: new high speed USB device using ehci_hcd and address 2 >>>>>> ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) >>>>>> ata1.00: ATA-8: ST9500423AS, 0002DEM1, max UDMA/133 >>>>>> ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) >>>>>> ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) >>>>>> ata1.00: configured for UDMA/133 >>>>>> scsi 0:0:0:0: Direct-Access ATA ST9500423AS 0002 PQ: 0 ANSI: 5 >>>>>> sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) >>>>>> sd 0:0:0:0: [sda] 4096-byte physical blocks >>>>>> sd 0:0:0:0: [sda] Write Protect is off >>>>>> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >>>>>> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >>>>>> sda: sda1 sda2 sda3 >>>>>> sd 0:0:0:0: [sda] Attached SCSI disk >>>>>> usb 2-1: configuration #1 chosen from 1 choice >>>>>> hub 2-1:1.0: USB hub found >>>>>> hub 2-1:1.0: 8 ports detected >>>>>> usb 1-1.4: new full speed USB device using ehci_hcd and address 3 >>>>>> usb 1-1.4: configuration #1 chosen from 1 choice >>>>>> usb 1-1.5: new high speed USB device using ehci_hcd and address 4 >>>>>> usb 1-1.5: configuration #1 chosen from 1 choice >>>>>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >>>>>> ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU60N, A102, max UDMA/133, ATAPI AN >>>>>> ata2.00: configured for UDMA/133 >>>>>> scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GU60N A102 PQ: 0 ANSI: 5 >>>>>> usb 2-1.8: new full speed USB device using ehci_hcd and address 3 >>>>>> usb 2-1.8: configuration #0 chosen from 1 choice >>>>>> usb 2-1.8: config 0 descriptor?? >>>>>> ata4: SATA link down (SStatus 0 SControl 300) >>>>>> ata5: SATA link down (SStatus 0 SControl 300) >>>>>> ata6: SATA link down (SStatus 0 SControl 300) >>>>>> device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com >>>>>> kjournald starting. Commit interval 15 seconds >>>>>> EXT3-fs: mounted filesystem with ordered data mode. >>>>>> input: PC Speaker as /class/input/input2 >>>>>> Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled >>>>>> serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 >>>>>> 0000:00:16.3: ttyS0 at I/O 0x40e0 (irq = 17) is a 16550A >>>>>> e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-NAPI >>>>>> e1000e: Copyright(c) 1999 - 2010 Intel Corporation. >>>>>> e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 >>>>>> e1000e 0000:00:19.0: setting latency timer to 64 >>>>>> e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X >>>>>> rtc_cmos 00:06: RTC can wake from S4 >>>>>> rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 >>>>>> rtc0: alarms up to one year, y3k, 242 bytes nvram >>>>>> parport_pc 00:08: activated >>>>>> parport_pc 00:08: reported by Plug and Play ACPI >>>>>> parport_pc 00:08: disabled >>>>>> e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) d4:be:d9:0f:d0:6c >>>>>> e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection >>>>>> e1000e 0000:00:19.0: eth0: MAC: 11, PHY: 11, PBA No: 3041FF-0FF >>>>>> i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >>>>>> ACPI: I/O resource 0000:00:1f.3 [0x4040-0x405f] conflicts with ACPI region SMBI [0x4040-0x404f] >>>>>> ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver >>>>>> ACPI: SSDT cadd7798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903) >>>>>> ACPI: SSDT cadd8a98 00303 (v01 PmRef ApIst 00003000 INTL 20090903) >>>>>> ACPI: SSDT cadd6d98 00119 (v01 PmRef ApCst 00003000 INTL 20090903) >>>>>> input: Lid Switch as /class/input/input3 >>>>>> ACPI: Lid Switch [LID] >>>>>> input: Power Button as /class/input/input4 >>>>>> ACPI: Power Button [PBTN] >>>>>> input: Sleep Button as /class/input/input5 >>>>>> ACPI: Sleep Button [SBTN] >>>>>> input: Power Button as /class/input/input6 >>>>>> ACPI: Power Button [PWRF] >>>>>> thermal LNXTHERM:01: registered as thermal_zone0 >>>>>> ACPI: Thermal Zone [THM] (25 C) >>>>>> sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray >>>>>> Uniform CD-ROM driver Revision: 3.20 >>>>>> sr 1:0:0:0: Attached scsi CD-ROM sr0 >>>>>> Compat-wireless backport release: compat-wireless-v3.4-rc1-2 >>>>>> Backport based on linux-stable.git v3.4-rc1 >>>>>> cfg80211: Calling CRDA to update world regulatory domain >>>>>> ACPI: AC Adapter [AC] (on-line) >>>>>> sd 0:0:0:0: Attached scsi generic sg0 type 0 >>>>>> sr 1:0:0:0: Attached scsi generic sg1 type 5 >>>>>> ACPI: Battery Slot [BAT0] (battery present) >>>>>> ACPI: Battery Slot [BAT1] (battery absent) >>>>>> ACPI: Battery Slot [BAT2] (battery absent) >>>>>> Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: >>>>>> Copyright(c) 2003-2012 Intel Corporation >>>>>> iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>>>>> iwlwifi 0000:02:00.0: setting latency timer to 64 >>>>>> iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 >>>>>> iwlwifi 0000:02:00.0: pci_resource_base = f2478000 >>>>>> iwlwifi 0000:02:00.0: HW Revision ID = 0x34 >>>>>> iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X >>>>>> acpi device:37: registered as cooling_device8 >>>>>> input: Video Bus as /class/input/input7 >>>>>> ACPI: Video Device [VID] (multi-head: yes rom: no post: no) >>>>>> Non-volatile memory driver v1.3 >>>>>> lp: driver loaded but no devices found >>>>>> md: Autodetecting RAID arrays. >>>>>> md: Scanned 0 and added 0 devices. >>>>>> md: autorun ... >>>>>> md: ... autorun DONE. >>>>>> EXT3 FS on sda1, internal journal >>>>>> ISO 9660 Extensions: Microsoft Joliet Level 3 >>>>>> ISO 9660 Extensions: RRIP_1991A >>>>>> Adding 524280k swap on /var/swap/swap.001. Priority:-1 extents:137 across:637248k >>>>>> Microcode Update Driver: v2.00-xen <tigran@aivazian.fsnet.co.uk>, Peter Oruba >>>>>> Microcode Update Driver: v2.00-xen removed. >>>>>> ip_tables: (C) 2000-2006 Netfilter Core Team >>>>>> nf_conntrack version 0.5.0 (12157 buckets, 48628 max) >>>>>> e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X >>>>>> e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X >>>>>> 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> >>>>>> All bugs added by David S. Miller <davem@redhat.com> >>>>>> device xenbr0 entered promiscuous mode >>>>>> device eth0 entered promiscuous mode >>>>>> e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX >>>>>> e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO >>>>>> RPC: Registered udp transport module. >>>>>> RPC: Registered tcp transport module. >>>>>> RPC: Registered tcp NFSv4.1 backchannel transport module. >>>>>> warning: `ntpdate' uses 32-bit capabilities (legacy support in use) >>>>>> suspend: event channel 38 >>>>>> kjournald starting. Commit interval 15 seconds >>>>>> EXT3 FS on dm-0, internal journal >>>>>> EXT3-fs: mounted filesystem with ordered data mode. >>>>>> iwlwifi 0000:02:00.0: ea4b7e1c >>>>>> iwlwifi 0000:02:00.0: ca253e1c >>>>>> iwlwifi 0000:02:00.0: ca253de8 >>>>>> iwlwifi 0000:02:00.0: PCI INT A disabled >>>>>> >>>>>> >>>>> >>>>> Ok, can you please set all the debug flags. Since nothing happens here >>>>> we shouldn't' see that many debug prints: >>>>> >>>>> modprobe iwlwifi debug=0xffffffff >>>>> >> > > modinfo iwlwifi ? > > also please used modprobe -r iwlwifi instead of rmmod. It will remove > also the modules on which iwlwifi depends (mac80211 etc...) While this > is not critical it is a bit cleaner to me. ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-19 7:49 ` Dominik Feser @ 2012-04-19 7:54 ` Emmanuel Grumbach 2012-04-19 7:55 ` Emmanuel Grumbach 2012-04-19 10:08 ` Dominik Feser 0 siblings, 2 replies; 48+ messages in thread From: Emmanuel Grumbach @ 2012-04-19 7:54 UTC (permalink / raw) To: Dominik Feser; +Cc: Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy On Thu, Apr 19, 2012 at 10:49, Dominik Feser <dominik.feser@googlemail.com> wrote: > Here is the output! And by the way, I really appreciate your help! Thank you! > > # modinfo iwlwifi > filename: /lib/modules/2.6.32.12-0.7.1/updates/drivers/net/wireless/iwlwifi/iwlwifi.ko > alias: iwlagn > license: GPL > author: Copyright(c) 2003-2012 Intel Corporation <ilw@linux.intel.com> > version: in-tree: > description: Intel(R) Wireless WiFi Link AGN driver for Linux > firmware: iwlwifi-5150-2.ucode > firmware: iwlwifi-5000-5.ucode > firmware: iwlwifi-6000g2b-6.ucode > firmware: iwlwifi-6000g2a-6.ucode > firmware: iwlwifi-6050-5.ucode > firmware: iwlwifi-6000-4.ucode > firmware: iwlwifi-100-6.ucode > firmware: iwlwifi-1000-6.ucode > firmware: iwlwifi-135-6.ucode > firmware: iwlwifi-105-6.ucode > firmware: iwlwifi-2030-6.ucode > firmware: iwlwifi-2000-6.ucode > srcversion: 169044416CC2B674049889B > alias: pci:v00008086d00000892sv*sd00000462bc*sc*i* > alias: pci:v00008086d00000893sv*sd00000262bc*sc*i* > alias: pci:v00008086d00000892sv*sd00000062bc*sc*i* > alias: pci:v00008086d00000894sv*sd00000822bc*sc*i* > alias: pci:v00008086d00000894sv*sd00000422bc*sc*i* > alias: pci:v00008086d00000895sv*sd00000222bc*sc*i* > alias: pci:v00008086d00000894sv*sd00000022bc*sc*i* > alias: pci:v00008086d0000088Esv*sd00004860bc*sc*i* > alias: pci:v00008086d0000088Esv*sd00004460bc*sc*i* > alias: pci:v00008086d0000088Fsv*sd00004260bc*sc*i* > alias: pci:v00008086d0000088Esv*sd00004060bc*sc*i* > alias: pci:v00008086d00000887sv*sd00004462bc*sc*i* > alias: pci:v00008086d00000888sv*sd00004262bc*sc*i* > alias: pci:v00008086d00000887sv*sd00004062bc*sc*i* > alias: pci:v00008086d00000890sv*sd00004822bc*sc*i* > alias: pci:v00008086d00000890sv*sd00004422bc*sc*i* > alias: pci:v00008086d00000891sv*sd00004222bc*sc*i* > alias: pci:v00008086d00000890sv*sd00004022bc*sc*i* > alias: pci:v00008086d00000896sv*sd00005027bc*sc*i* > alias: pci:v00008086d00000896sv*sd00005025bc*sc*i* > alias: pci:v00008086d00000897sv*sd00005017bc*sc*i* > alias: pci:v00008086d00000897sv*sd00005015bc*sc*i* > alias: pci:v00008086d00000896sv*sd00005007bc*sc*i* > alias: pci:v00008086d00000896sv*sd00005005bc*sc*i* > alias: pci:v00008086d000008AEsv*sd00001027bc*sc*i* > alias: pci:v00008086d000008AEsv*sd00001025bc*sc*i* > alias: pci:v00008086d000008AFsv*sd00001017bc*sc*i* > alias: pci:v00008086d000008AFsv*sd00001015bc*sc*i* > alias: pci:v00008086d000008AEsv*sd00001007bc*sc*i* > alias: pci:v00008086d000008AEsv*sd00001005bc*sc*i* > alias: pci:v00008086d00000084sv*sd00001316bc*sc*i* > alias: pci:v00008086d00000084sv*sd00001216bc*sc*i* > alias: pci:v00008086d00000083sv*sd00001326bc*sc*i* > alias: pci:v00008086d00000083sv*sd00001226bc*sc*i* > alias: pci:v00008086d00000083sv*sd00001306bc*sc*i* > alias: pci:v00008086d00000083sv*sd00001206bc*sc*i* > alias: pci:v00008086d00000084sv*sd00001315bc*sc*i* > alias: pci:v00008086d00000084sv*sd00001215bc*sc*i* > alias: pci:v00008086d00000083sv*sd00001325bc*sc*i* > alias: pci:v00008086d00000083sv*sd00001225bc*sc*i* > alias: pci:v00008086d00000083sv*sd00001305bc*sc*i* > alias: pci:v00008086d00000083sv*sd00001205bc*sc*i* > alias: pci:v00008086d00000886sv*sd00001317bc*sc*i* > alias: pci:v00008086d00000886sv*sd00001315bc*sc*i* > alias: pci:v00008086d00000885sv*sd00001327bc*sc*i* > alias: pci:v00008086d00000885sv*sd00001325bc*sc*i* > alias: pci:v00008086d00000885sv*sd00001307bc*sc*i* > alias: pci:v00008086d00000885sv*sd00001305bc*sc*i* > alias: pci:v00008086d00000089sv*sd00001316bc*sc*i* > alias: pci:v00008086d00000089sv*sd00001311bc*sc*i* > alias: pci:v00008086d00000087sv*sd00001326bc*sc*i* > alias: pci:v00008086d00000087sv*sd00001321bc*sc*i* > alias: pci:v00008086d00000087sv*sd00001306bc*sc*i* > alias: pci:v00008086d00000087sv*sd00001301bc*sc*i* > alias: pci:v00008086d00000091sv*sd00005226bc*sc*i* > alias: pci:v00008086d00000091sv*sd00005225bc*sc*i* > alias: pci:v00008086d00000091sv*sd00005221bc*sc*i* > alias: pci:v00008086d00000091sv*sd00005207bc*sc*i* > alias: pci:v00008086d00000091sv*sd00005206bc*sc*i* > alias: pci:v00008086d00000091sv*sd00005205bc*sc*i* > alias: pci:v00008086d00000091sv*sd00005201bc*sc*i* > alias: pci:v00008086d00000090sv*sd00005216bc*sc*i* > alias: pci:v00008086d00000090sv*sd00005215bc*sc*i* > alias: pci:v00008086d00000090sv*sd00005211bc*sc*i* > alias: pci:v00008086d0000008Bsv*sd00005317bc*sc*i* > alias: pci:v00008086d0000008Bsv*sd00005315bc*sc*i* > alias: pci:v00008086d0000008Asv*sd00005327bc*sc*i* > alias: pci:v00008086d0000008Asv*sd00005325bc*sc*i* > alias: pci:v00008086d0000008Asv*sd00005307bc*sc*i* > alias: pci:v00008086d0000008Asv*sd00005305bc*sc*i* > alias: pci:v00008086d00000082sv*sd00001305bc*sc*i* > alias: pci:v00008086d00000082sv*sd00001304bc*sc*i* > alias: pci:v00008086d00000082sv*sd00004820bc*sc*i* > alias: pci:v00008086d00000085sv*sd0000C220bc*sc*i* > alias: pci:v00008086d00000082sv*sd0000C020bc*sc*i* > alias: pci:v00008086d00000085sv*sd00001316bc*sc*i* > alias: pci:v00008086d00000085sv*sd00001311bc*sc*i* > alias: pci:v00008086d00000082sv*sd00001326bc*sc*i* > alias: pci:v00008086d00000082sv*sd00001321bc*sc*i* > alias: pci:v00008086d00000082sv*sd00001307bc*sc*i* > alias: pci:v00008086d00000082sv*sd00001306bc*sc*i* > alias: pci:v00008086d00000082sv*sd00001301bc*sc*i* > alias: pci:v00008086d00004239sv*sd00001316bc*sc*i* > alias: pci:v00008086d00004239sv*sd00001311bc*sc*i* > alias: pci:v00008086d00004238sv*sd00001111bc*sc*i* > alias: pci:v00008086d0000422Csv*sd00001326bc*sc*i* > alias: pci:v00008086d0000422Csv*sd00001321bc*sc*i* > alias: pci:v00008086d0000422Csv*sd00001307bc*sc*i* > alias: pci:v00008086d0000422Csv*sd00001306bc*sc*i* > alias: pci:v00008086d0000422Csv*sd00001301bc*sc*i* > alias: pci:v00008086d0000422Bsv*sd00001121bc*sc*i* > alias: pci:v00008086d0000422Bsv*sd00001101bc*sc*i* > alias: pci:v00008086d0000423Dsv*sd00001316bc*sc*i* > alias: pci:v00008086d0000423Dsv*sd00001216bc*sc*i* > alias: pci:v00008086d0000423Dsv*sd00001311bc*sc*i* > alias: pci:v00008086d0000423Dsv*sd00001211bc*sc*i* > alias: pci:v00008086d0000423Csv*sd00001321bc*sc*i* > alias: pci:v00008086d0000423Csv*sd00001221bc*sc*i* > alias: pci:v00008086d0000423Csv*sd00001306bc*sc*i* > alias: pci:v00008086d0000423Csv*sd00001206bc*sc*i* > alias: pci:v00008086d0000423Csv*sd00001301bc*sc*i* > alias: pci:v00008086d0000423Csv*sd00001201bc*sc*i* > alias: pci:v00008086d0000423Bsv*sd00001011bc*sc*i* > alias: pci:v00008086d0000423Asv*sd00001021bc*sc*i* > alias: pci:v00008086d0000423Asv*sd00001001bc*sc*i* > alias: pci:v00008086d00004236sv*sd00001114bc*sc*i* > alias: pci:v00008086d00004236sv*sd00001014bc*sc*i* > alias: pci:v00008086d00004236sv*sd00001111bc*sc*i* > alias: pci:v00008086d00004236sv*sd00001011bc*sc*i* > alias: pci:v00008086d00004235sv*sd00001104bc*sc*i* > alias: pci:v00008086d00004235sv*sd00001004bc*sc*i* > alias: pci:v00008086d00004235sv*sd00001101bc*sc*i* > alias: pci:v00008086d00004235sv*sd00001001bc*sc*i* > alias: pci:v00008086d00004235sv*sd00001124bc*sc*i* > alias: pci:v00008086d00004235sv*sd00001024bc*sc*i* > alias: pci:v00008086d00004235sv*sd00001121bc*sc*i* > alias: pci:v00008086d00004235sv*sd00001021bc*sc*i* > alias: pci:v00008086d00004237sv*sd00001316bc*sc*i* > alias: pci:v00008086d00004237sv*sd00001216bc*sc*i* > alias: pci:v00008086d00004237sv*sd00001315bc*sc*i* > alias: pci:v00008086d00004237sv*sd00001215bc*sc*i* > alias: pci:v00008086d00004237sv*sd00001314bc*sc*i* > alias: pci:v00008086d00004237sv*sd00001214bc*sc*i* > alias: pci:v00008086d00004237sv*sd00001311bc*sc*i* > alias: pci:v00008086d00004237sv*sd00001211bc*sc*i* > alias: pci:v00008086d00004232sv*sd00001326bc*sc*i* > alias: pci:v00008086d00004232sv*sd00001226bc*sc*i* > alias: pci:v00008086d00004232sv*sd00001325bc*sc*i* > alias: pci:v00008086d00004232sv*sd00001225bc*sc*i* > alias: pci:v00008086d00004232sv*sd00001324bc*sc*i* > alias: pci:v00008086d00004232sv*sd00001224bc*sc*i* > alias: pci:v00008086d00004232sv*sd00001321bc*sc*i* > alias: pci:v00008086d00004232sv*sd00001221bc*sc*i* > alias: pci:v00008086d00004232sv*sd00001306bc*sc*i* > alias: pci:v00008086d00004232sv*sd00001206bc*sc*i* > alias: pci:v00008086d00004232sv*sd00001305bc*sc*i* > alias: pci:v00008086d00004232sv*sd00001205bc*sc*i* > alias: pci:v00008086d00004232sv*sd00001304bc*sc*i* > alias: pci:v00008086d00004232sv*sd00001204bc*sc*i* > alias: pci:v00008086d00004232sv*sd00001301bc*sc*i* > alias: pci:v00008086d00004232sv*sd00001201bc*sc*i* > depends: mac80211,compat,led-class,cfg80211,compat_firmware_class > vermagic: 2.6.32.12-0.7.1 SMP mod_unload modversions Xen 686 > parm: swcrypto:using crypto in software (default 0 [hardware]) (int) > parm: 11n_disable:disable 11n functionality, bitmap: 1: full, 2: agg TX, 4: agg RX (uint) > parm: amsdu_size_8K:enable 8K amsdu size (int) > parm: fw_restart:restart firmware in case of error (int) > parm: ucode_alternative:specify ucode alternative to use from ucode file (int) > parm: antenna_coupling:specify antenna coupling in dB (defualt: 0 dB) (int) > parm: bt_ch_inhibition:Enable BT channel inhibition (default: enable) (bool) > parm: plcp_check:Check plcp health (default: 1 [enabled]) (bool) > parm: ack_check:Check ack health (default: 0 [disabled]) (bool) > parm: wd_disable:Disable stuck queue watchdog timer 0=system default, 1=disable, 2=enable (default: 0) (int) > parm: bt_coex_active:enable wifi/bt co-exist (default: enable) (bool) > parm: led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int) > parm: power_save:enable WiFi power management (default: disable) (bool) > parm: power_level:default power save level (range from 1 - 5, default: 1) (int) > parm: auto_agg:enable agg w/o check traffic load (default: enable) (bool) > parm: no_sleep_autoadjust:don't automatically adjust sleep level according to maximum network latency (default: true) (bool) > All right, no debug in there. I understand that you use compat. Please clean everything: git clean -f -d -x Beware this will remove all the files that you have added there. This won't remove the W/A you made to compile. ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-19 7:54 ` Emmanuel Grumbach @ 2012-04-19 7:55 ` Emmanuel Grumbach 2012-04-19 10:08 ` Dominik Feser 1 sibling, 0 replies; 48+ messages in thread From: Emmanuel Grumbach @ 2012-04-19 7:55 UTC (permalink / raw) To: Dominik Feser; +Cc: Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy On Thu, Apr 19, 2012 at 10:54, Emmanuel Grumbach <egrumbach@gmail.com> wrote: > On Thu, Apr 19, 2012 at 10:49, Dominik Feser > <dominik.feser@googlemail.com> wrote: >> Here is the output! And by the way, I really appreciate your help! Thank you! >> >> # modinfo iwlwifi >> filename: /lib/modules/2.6.32.12-0.7.1/updates/drivers/net/wireless/iwlwifi/iwlwifi.ko >> alias: iwlagn >> license: GPL >> author: Copyright(c) 2003-2012 Intel Corporation <ilw@linux.intel.com> >> version: in-tree: >> description: Intel(R) Wireless WiFi Link AGN driver for Linux >> firmware: iwlwifi-5150-2.ucode >> firmware: iwlwifi-5000-5.ucode >> firmware: iwlwifi-6000g2b-6.ucode >> firmware: iwlwifi-6000g2a-6.ucode >> firmware: iwlwifi-6050-5.ucode >> firmware: iwlwifi-6000-4.ucode >> firmware: iwlwifi-100-6.ucode >> firmware: iwlwifi-1000-6.ucode >> firmware: iwlwifi-135-6.ucode >> firmware: iwlwifi-105-6.ucode >> firmware: iwlwifi-2030-6.ucode >> firmware: iwlwifi-2000-6.ucode >> srcversion: 169044416CC2B674049889B >> alias: pci:v00008086d00000892sv*sd00000462bc*sc*i* >> alias: pci:v00008086d00000893sv*sd00000262bc*sc*i* >> alias: pci:v00008086d00000892sv*sd00000062bc*sc*i* >> alias: pci:v00008086d00000894sv*sd00000822bc*sc*i* >> alias: pci:v00008086d00000894sv*sd00000422bc*sc*i* >> alias: pci:v00008086d00000895sv*sd00000222bc*sc*i* >> alias: pci:v00008086d00000894sv*sd00000022bc*sc*i* >> alias: pci:v00008086d0000088Esv*sd00004860bc*sc*i* >> alias: pci:v00008086d0000088Esv*sd00004460bc*sc*i* >> alias: pci:v00008086d0000088Fsv*sd00004260bc*sc*i* >> alias: pci:v00008086d0000088Esv*sd00004060bc*sc*i* >> alias: pci:v00008086d00000887sv*sd00004462bc*sc*i* >> alias: pci:v00008086d00000888sv*sd00004262bc*sc*i* >> alias: pci:v00008086d00000887sv*sd00004062bc*sc*i* >> alias: pci:v00008086d00000890sv*sd00004822bc*sc*i* >> alias: pci:v00008086d00000890sv*sd00004422bc*sc*i* >> alias: pci:v00008086d00000891sv*sd00004222bc*sc*i* >> alias: pci:v00008086d00000890sv*sd00004022bc*sc*i* >> alias: pci:v00008086d00000896sv*sd00005027bc*sc*i* >> alias: pci:v00008086d00000896sv*sd00005025bc*sc*i* >> alias: pci:v00008086d00000897sv*sd00005017bc*sc*i* >> alias: pci:v00008086d00000897sv*sd00005015bc*sc*i* >> alias: pci:v00008086d00000896sv*sd00005007bc*sc*i* >> alias: pci:v00008086d00000896sv*sd00005005bc*sc*i* >> alias: pci:v00008086d000008AEsv*sd00001027bc*sc*i* >> alias: pci:v00008086d000008AEsv*sd00001025bc*sc*i* >> alias: pci:v00008086d000008AFsv*sd00001017bc*sc*i* >> alias: pci:v00008086d000008AFsv*sd00001015bc*sc*i* >> alias: pci:v00008086d000008AEsv*sd00001007bc*sc*i* >> alias: pci:v00008086d000008AEsv*sd00001005bc*sc*i* >> alias: pci:v00008086d00000084sv*sd00001316bc*sc*i* >> alias: pci:v00008086d00000084sv*sd00001216bc*sc*i* >> alias: pci:v00008086d00000083sv*sd00001326bc*sc*i* >> alias: pci:v00008086d00000083sv*sd00001226bc*sc*i* >> alias: pci:v00008086d00000083sv*sd00001306bc*sc*i* >> alias: pci:v00008086d00000083sv*sd00001206bc*sc*i* >> alias: pci:v00008086d00000084sv*sd00001315bc*sc*i* >> alias: pci:v00008086d00000084sv*sd00001215bc*sc*i* >> alias: pci:v00008086d00000083sv*sd00001325bc*sc*i* >> alias: pci:v00008086d00000083sv*sd00001225bc*sc*i* >> alias: pci:v00008086d00000083sv*sd00001305bc*sc*i* >> alias: pci:v00008086d00000083sv*sd00001205bc*sc*i* >> alias: pci:v00008086d00000886sv*sd00001317bc*sc*i* >> alias: pci:v00008086d00000886sv*sd00001315bc*sc*i* >> alias: pci:v00008086d00000885sv*sd00001327bc*sc*i* >> alias: pci:v00008086d00000885sv*sd00001325bc*sc*i* >> alias: pci:v00008086d00000885sv*sd00001307bc*sc*i* >> alias: pci:v00008086d00000885sv*sd00001305bc*sc*i* >> alias: pci:v00008086d00000089sv*sd00001316bc*sc*i* >> alias: pci:v00008086d00000089sv*sd00001311bc*sc*i* >> alias: pci:v00008086d00000087sv*sd00001326bc*sc*i* >> alias: pci:v00008086d00000087sv*sd00001321bc*sc*i* >> alias: pci:v00008086d00000087sv*sd00001306bc*sc*i* >> alias: pci:v00008086d00000087sv*sd00001301bc*sc*i* >> alias: pci:v00008086d00000091sv*sd00005226bc*sc*i* >> alias: pci:v00008086d00000091sv*sd00005225bc*sc*i* >> alias: pci:v00008086d00000091sv*sd00005221bc*sc*i* >> alias: pci:v00008086d00000091sv*sd00005207bc*sc*i* >> alias: pci:v00008086d00000091sv*sd00005206bc*sc*i* >> alias: pci:v00008086d00000091sv*sd00005205bc*sc*i* >> alias: pci:v00008086d00000091sv*sd00005201bc*sc*i* >> alias: pci:v00008086d00000090sv*sd00005216bc*sc*i* >> alias: pci:v00008086d00000090sv*sd00005215bc*sc*i* >> alias: pci:v00008086d00000090sv*sd00005211bc*sc*i* >> alias: pci:v00008086d0000008Bsv*sd00005317bc*sc*i* >> alias: pci:v00008086d0000008Bsv*sd00005315bc*sc*i* >> alias: pci:v00008086d0000008Asv*sd00005327bc*sc*i* >> alias: pci:v00008086d0000008Asv*sd00005325bc*sc*i* >> alias: pci:v00008086d0000008Asv*sd00005307bc*sc*i* >> alias: pci:v00008086d0000008Asv*sd00005305bc*sc*i* >> alias: pci:v00008086d00000082sv*sd00001305bc*sc*i* >> alias: pci:v00008086d00000082sv*sd00001304bc*sc*i* >> alias: pci:v00008086d00000082sv*sd00004820bc*sc*i* >> alias: pci:v00008086d00000085sv*sd0000C220bc*sc*i* >> alias: pci:v00008086d00000082sv*sd0000C020bc*sc*i* >> alias: pci:v00008086d00000085sv*sd00001316bc*sc*i* >> alias: pci:v00008086d00000085sv*sd00001311bc*sc*i* >> alias: pci:v00008086d00000082sv*sd00001326bc*sc*i* >> alias: pci:v00008086d00000082sv*sd00001321bc*sc*i* >> alias: pci:v00008086d00000082sv*sd00001307bc*sc*i* >> alias: pci:v00008086d00000082sv*sd00001306bc*sc*i* >> alias: pci:v00008086d00000082sv*sd00001301bc*sc*i* >> alias: pci:v00008086d00004239sv*sd00001316bc*sc*i* >> alias: pci:v00008086d00004239sv*sd00001311bc*sc*i* >> alias: pci:v00008086d00004238sv*sd00001111bc*sc*i* >> alias: pci:v00008086d0000422Csv*sd00001326bc*sc*i* >> alias: pci:v00008086d0000422Csv*sd00001321bc*sc*i* >> alias: pci:v00008086d0000422Csv*sd00001307bc*sc*i* >> alias: pci:v00008086d0000422Csv*sd00001306bc*sc*i* >> alias: pci:v00008086d0000422Csv*sd00001301bc*sc*i* >> alias: pci:v00008086d0000422Bsv*sd00001121bc*sc*i* >> alias: pci:v00008086d0000422Bsv*sd00001101bc*sc*i* >> alias: pci:v00008086d0000423Dsv*sd00001316bc*sc*i* >> alias: pci:v00008086d0000423Dsv*sd00001216bc*sc*i* >> alias: pci:v00008086d0000423Dsv*sd00001311bc*sc*i* >> alias: pci:v00008086d0000423Dsv*sd00001211bc*sc*i* >> alias: pci:v00008086d0000423Csv*sd00001321bc*sc*i* >> alias: pci:v00008086d0000423Csv*sd00001221bc*sc*i* >> alias: pci:v00008086d0000423Csv*sd00001306bc*sc*i* >> alias: pci:v00008086d0000423Csv*sd00001206bc*sc*i* >> alias: pci:v00008086d0000423Csv*sd00001301bc*sc*i* >> alias: pci:v00008086d0000423Csv*sd00001201bc*sc*i* >> alias: pci:v00008086d0000423Bsv*sd00001011bc*sc*i* >> alias: pci:v00008086d0000423Asv*sd00001021bc*sc*i* >> alias: pci:v00008086d0000423Asv*sd00001001bc*sc*i* >> alias: pci:v00008086d00004236sv*sd00001114bc*sc*i* >> alias: pci:v00008086d00004236sv*sd00001014bc*sc*i* >> alias: pci:v00008086d00004236sv*sd00001111bc*sc*i* >> alias: pci:v00008086d00004236sv*sd00001011bc*sc*i* >> alias: pci:v00008086d00004235sv*sd00001104bc*sc*i* >> alias: pci:v00008086d00004235sv*sd00001004bc*sc*i* >> alias: pci:v00008086d00004235sv*sd00001101bc*sc*i* >> alias: pci:v00008086d00004235sv*sd00001001bc*sc*i* >> alias: pci:v00008086d00004235sv*sd00001124bc*sc*i* >> alias: pci:v00008086d00004235sv*sd00001024bc*sc*i* >> alias: pci:v00008086d00004235sv*sd00001121bc*sc*i* >> alias: pci:v00008086d00004235sv*sd00001021bc*sc*i* >> alias: pci:v00008086d00004237sv*sd00001316bc*sc*i* >> alias: pci:v00008086d00004237sv*sd00001216bc*sc*i* >> alias: pci:v00008086d00004237sv*sd00001315bc*sc*i* >> alias: pci:v00008086d00004237sv*sd00001215bc*sc*i* >> alias: pci:v00008086d00004237sv*sd00001314bc*sc*i* >> alias: pci:v00008086d00004237sv*sd00001214bc*sc*i* >> alias: pci:v00008086d00004237sv*sd00001311bc*sc*i* >> alias: pci:v00008086d00004237sv*sd00001211bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001326bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001226bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001325bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001225bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001324bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001224bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001321bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001221bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001306bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001206bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001305bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001205bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001304bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001204bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001301bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001201bc*sc*i* >> depends: mac80211,compat,led-class,cfg80211,compat_firmware_class >> vermagic: 2.6.32.12-0.7.1 SMP mod_unload modversions Xen 686 >> parm: swcrypto:using crypto in software (default 0 [hardware]) (int) >> parm: 11n_disable:disable 11n functionality, bitmap: 1: full, 2: agg TX, 4: agg RX (uint) >> parm: amsdu_size_8K:enable 8K amsdu size (int) >> parm: fw_restart:restart firmware in case of error (int) >> parm: ucode_alternative:specify ucode alternative to use from ucode file (int) >> parm: antenna_coupling:specify antenna coupling in dB (defualt: 0 dB) (int) >> parm: bt_ch_inhibition:Enable BT channel inhibition (default: enable) (bool) >> parm: plcp_check:Check plcp health (default: 1 [enabled]) (bool) >> parm: ack_check:Check ack health (default: 0 [disabled]) (bool) >> parm: wd_disable:Disable stuck queue watchdog timer 0=system default, 1=disable, 2=enable (default: 0) (int) >> parm: bt_coex_active:enable wifi/bt co-exist (default: enable) (bool) >> parm: led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int) >> parm: power_save:enable WiFi power management (default: disable) (bool) >> parm: power_level:default power save level (range from 1 - 5, default: 1) (int) >> parm: auto_agg:enable agg w/o check traffic load (default: enable) (bool) >> parm: no_sleep_autoadjust:don't automatically adjust sleep level according to maximum network latency (default: true) (bool) >> > > All right, no debug in there. > I understand that you use compat. > Please clean everything: > > git clean -f -d -x > > Beware this will remove all the files that you have added there. This > won't remove the W/A you made to compile. And of course, recompile plus install after that ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-19 7:54 ` Emmanuel Grumbach 2012-04-19 7:55 ` Emmanuel Grumbach @ 2012-04-19 10:08 ` Dominik Feser 2012-04-19 13:16 ` Emmanuel Grumbach 1 sibling, 1 reply; 48+ messages in thread From: Dominik Feser @ 2012-04-19 10:08 UTC (permalink / raw) To: Emmanuel Grumbach Cc: Dominik Feser, Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy Sice I downloaded compat-wireless manually and without git the command you proposed doesn't work. I would use git but I couldn't find a url to clone from. Can you give a hint on that? Am 19.04.2012 um 09:54 schrieb Emmanuel Grumbach: > On Thu, Apr 19, 2012 at 10:49, Dominik Feser > <dominik.feser@googlemail.com> wrote: >> Here is the output! And by the way, I really appreciate your help! Thank you! >> >> # modinfo iwlwifi >> filename: /lib/modules/2.6.32.12-0.7.1/updates/drivers/net/wireless/iwlwifi/iwlwifi.ko >> alias: iwlagn >> license: GPL >> author: Copyright(c) 2003-2012 Intel Corporation <ilw@linux.intel.com> >> version: in-tree: >> description: Intel(R) Wireless WiFi Link AGN driver for Linux >> firmware: iwlwifi-5150-2.ucode >> firmware: iwlwifi-5000-5.ucode >> firmware: iwlwifi-6000g2b-6.ucode >> firmware: iwlwifi-6000g2a-6.ucode >> firmware: iwlwifi-6050-5.ucode >> firmware: iwlwifi-6000-4.ucode >> firmware: iwlwifi-100-6.ucode >> firmware: iwlwifi-1000-6.ucode >> firmware: iwlwifi-135-6.ucode >> firmware: iwlwifi-105-6.ucode >> firmware: iwlwifi-2030-6.ucode >> firmware: iwlwifi-2000-6.ucode >> srcversion: 169044416CC2B674049889B >> alias: pci:v00008086d00000892sv*sd00000462bc*sc*i* >> alias: pci:v00008086d00000893sv*sd00000262bc*sc*i* >> alias: pci:v00008086d00000892sv*sd00000062bc*sc*i* >> alias: pci:v00008086d00000894sv*sd00000822bc*sc*i* >> alias: pci:v00008086d00000894sv*sd00000422bc*sc*i* >> alias: pci:v00008086d00000895sv*sd00000222bc*sc*i* >> alias: pci:v00008086d00000894sv*sd00000022bc*sc*i* >> alias: pci:v00008086d0000088Esv*sd00004860bc*sc*i* >> alias: pci:v00008086d0000088Esv*sd00004460bc*sc*i* >> alias: pci:v00008086d0000088Fsv*sd00004260bc*sc*i* >> alias: pci:v00008086d0000088Esv*sd00004060bc*sc*i* >> alias: pci:v00008086d00000887sv*sd00004462bc*sc*i* >> alias: pci:v00008086d00000888sv*sd00004262bc*sc*i* >> alias: pci:v00008086d00000887sv*sd00004062bc*sc*i* >> alias: pci:v00008086d00000890sv*sd00004822bc*sc*i* >> alias: pci:v00008086d00000890sv*sd00004422bc*sc*i* >> alias: pci:v00008086d00000891sv*sd00004222bc*sc*i* >> alias: pci:v00008086d00000890sv*sd00004022bc*sc*i* >> alias: pci:v00008086d00000896sv*sd00005027bc*sc*i* >> alias: pci:v00008086d00000896sv*sd00005025bc*sc*i* >> alias: pci:v00008086d00000897sv*sd00005017bc*sc*i* >> alias: pci:v00008086d00000897sv*sd00005015bc*sc*i* >> alias: pci:v00008086d00000896sv*sd00005007bc*sc*i* >> alias: pci:v00008086d00000896sv*sd00005005bc*sc*i* >> alias: pci:v00008086d000008AEsv*sd00001027bc*sc*i* >> alias: pci:v00008086d000008AEsv*sd00001025bc*sc*i* >> alias: pci:v00008086d000008AFsv*sd00001017bc*sc*i* >> alias: pci:v00008086d000008AFsv*sd00001015bc*sc*i* >> alias: pci:v00008086d000008AEsv*sd00001007bc*sc*i* >> alias: pci:v00008086d000008AEsv*sd00001005bc*sc*i* >> alias: pci:v00008086d00000084sv*sd00001316bc*sc*i* >> alias: pci:v00008086d00000084sv*sd00001216bc*sc*i* >> alias: pci:v00008086d00000083sv*sd00001326bc*sc*i* >> alias: pci:v00008086d00000083sv*sd00001226bc*sc*i* >> alias: pci:v00008086d00000083sv*sd00001306bc*sc*i* >> alias: pci:v00008086d00000083sv*sd00001206bc*sc*i* >> alias: pci:v00008086d00000084sv*sd00001315bc*sc*i* >> alias: pci:v00008086d00000084sv*sd00001215bc*sc*i* >> alias: pci:v00008086d00000083sv*sd00001325bc*sc*i* >> alias: pci:v00008086d00000083sv*sd00001225bc*sc*i* >> alias: pci:v00008086d00000083sv*sd00001305bc*sc*i* >> alias: pci:v00008086d00000083sv*sd00001205bc*sc*i* >> alias: pci:v00008086d00000886sv*sd00001317bc*sc*i* >> alias: pci:v00008086d00000886sv*sd00001315bc*sc*i* >> alias: pci:v00008086d00000885sv*sd00001327bc*sc*i* >> alias: pci:v00008086d00000885sv*sd00001325bc*sc*i* >> alias: pci:v00008086d00000885sv*sd00001307bc*sc*i* >> alias: pci:v00008086d00000885sv*sd00001305bc*sc*i* >> alias: pci:v00008086d00000089sv*sd00001316bc*sc*i* >> alias: pci:v00008086d00000089sv*sd00001311bc*sc*i* >> alias: pci:v00008086d00000087sv*sd00001326bc*sc*i* >> alias: pci:v00008086d00000087sv*sd00001321bc*sc*i* >> alias: pci:v00008086d00000087sv*sd00001306bc*sc*i* >> alias: pci:v00008086d00000087sv*sd00001301bc*sc*i* >> alias: pci:v00008086d00000091sv*sd00005226bc*sc*i* >> alias: pci:v00008086d00000091sv*sd00005225bc*sc*i* >> alias: pci:v00008086d00000091sv*sd00005221bc*sc*i* >> alias: pci:v00008086d00000091sv*sd00005207bc*sc*i* >> alias: pci:v00008086d00000091sv*sd00005206bc*sc*i* >> alias: pci:v00008086d00000091sv*sd00005205bc*sc*i* >> alias: pci:v00008086d00000091sv*sd00005201bc*sc*i* >> alias: pci:v00008086d00000090sv*sd00005216bc*sc*i* >> alias: pci:v00008086d00000090sv*sd00005215bc*sc*i* >> alias: pci:v00008086d00000090sv*sd00005211bc*sc*i* >> alias: pci:v00008086d0000008Bsv*sd00005317bc*sc*i* >> alias: pci:v00008086d0000008Bsv*sd00005315bc*sc*i* >> alias: pci:v00008086d0000008Asv*sd00005327bc*sc*i* >> alias: pci:v00008086d0000008Asv*sd00005325bc*sc*i* >> alias: pci:v00008086d0000008Asv*sd00005307bc*sc*i* >> alias: pci:v00008086d0000008Asv*sd00005305bc*sc*i* >> alias: pci:v00008086d00000082sv*sd00001305bc*sc*i* >> alias: pci:v00008086d00000082sv*sd00001304bc*sc*i* >> alias: pci:v00008086d00000082sv*sd00004820bc*sc*i* >> alias: pci:v00008086d00000085sv*sd0000C220bc*sc*i* >> alias: pci:v00008086d00000082sv*sd0000C020bc*sc*i* >> alias: pci:v00008086d00000085sv*sd00001316bc*sc*i* >> alias: pci:v00008086d00000085sv*sd00001311bc*sc*i* >> alias: pci:v00008086d00000082sv*sd00001326bc*sc*i* >> alias: pci:v00008086d00000082sv*sd00001321bc*sc*i* >> alias: pci:v00008086d00000082sv*sd00001307bc*sc*i* >> alias: pci:v00008086d00000082sv*sd00001306bc*sc*i* >> alias: pci:v00008086d00000082sv*sd00001301bc*sc*i* >> alias: pci:v00008086d00004239sv*sd00001316bc*sc*i* >> alias: pci:v00008086d00004239sv*sd00001311bc*sc*i* >> alias: pci:v00008086d00004238sv*sd00001111bc*sc*i* >> alias: pci:v00008086d0000422Csv*sd00001326bc*sc*i* >> alias: pci:v00008086d0000422Csv*sd00001321bc*sc*i* >> alias: pci:v00008086d0000422Csv*sd00001307bc*sc*i* >> alias: pci:v00008086d0000422Csv*sd00001306bc*sc*i* >> alias: pci:v00008086d0000422Csv*sd00001301bc*sc*i* >> alias: pci:v00008086d0000422Bsv*sd00001121bc*sc*i* >> alias: pci:v00008086d0000422Bsv*sd00001101bc*sc*i* >> alias: pci:v00008086d0000423Dsv*sd00001316bc*sc*i* >> alias: pci:v00008086d0000423Dsv*sd00001216bc*sc*i* >> alias: pci:v00008086d0000423Dsv*sd00001311bc*sc*i* >> alias: pci:v00008086d0000423Dsv*sd00001211bc*sc*i* >> alias: pci:v00008086d0000423Csv*sd00001321bc*sc*i* >> alias: pci:v00008086d0000423Csv*sd00001221bc*sc*i* >> alias: pci:v00008086d0000423Csv*sd00001306bc*sc*i* >> alias: pci:v00008086d0000423Csv*sd00001206bc*sc*i* >> alias: pci:v00008086d0000423Csv*sd00001301bc*sc*i* >> alias: pci:v00008086d0000423Csv*sd00001201bc*sc*i* >> alias: pci:v00008086d0000423Bsv*sd00001011bc*sc*i* >> alias: pci:v00008086d0000423Asv*sd00001021bc*sc*i* >> alias: pci:v00008086d0000423Asv*sd00001001bc*sc*i* >> alias: pci:v00008086d00004236sv*sd00001114bc*sc*i* >> alias: pci:v00008086d00004236sv*sd00001014bc*sc*i* >> alias: pci:v00008086d00004236sv*sd00001111bc*sc*i* >> alias: pci:v00008086d00004236sv*sd00001011bc*sc*i* >> alias: pci:v00008086d00004235sv*sd00001104bc*sc*i* >> alias: pci:v00008086d00004235sv*sd00001004bc*sc*i* >> alias: pci:v00008086d00004235sv*sd00001101bc*sc*i* >> alias: pci:v00008086d00004235sv*sd00001001bc*sc*i* >> alias: pci:v00008086d00004235sv*sd00001124bc*sc*i* >> alias: pci:v00008086d00004235sv*sd00001024bc*sc*i* >> alias: pci:v00008086d00004235sv*sd00001121bc*sc*i* >> alias: pci:v00008086d00004235sv*sd00001021bc*sc*i* >> alias: pci:v00008086d00004237sv*sd00001316bc*sc*i* >> alias: pci:v00008086d00004237sv*sd00001216bc*sc*i* >> alias: pci:v00008086d00004237sv*sd00001315bc*sc*i* >> alias: pci:v00008086d00004237sv*sd00001215bc*sc*i* >> alias: pci:v00008086d00004237sv*sd00001314bc*sc*i* >> alias: pci:v00008086d00004237sv*sd00001214bc*sc*i* >> alias: pci:v00008086d00004237sv*sd00001311bc*sc*i* >> alias: pci:v00008086d00004237sv*sd00001211bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001326bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001226bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001325bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001225bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001324bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001224bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001321bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001221bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001306bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001206bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001305bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001205bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001304bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001204bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001301bc*sc*i* >> alias: pci:v00008086d00004232sv*sd00001201bc*sc*i* >> depends: mac80211,compat,led-class,cfg80211,compat_firmware_class >> vermagic: 2.6.32.12-0.7.1 SMP mod_unload modversions Xen 686 >> parm: swcrypto:using crypto in software (default 0 [hardware]) (int) >> parm: 11n_disable:disable 11n functionality, bitmap: 1: full, 2: agg TX, 4: agg RX (uint) >> parm: amsdu_size_8K:enable 8K amsdu size (int) >> parm: fw_restart:restart firmware in case of error (int) >> parm: ucode_alternative:specify ucode alternative to use from ucode file (int) >> parm: antenna_coupling:specify antenna coupling in dB (defualt: 0 dB) (int) >> parm: bt_ch_inhibition:Enable BT channel inhibition (default: enable) (bool) >> parm: plcp_check:Check plcp health (default: 1 [enabled]) (bool) >> parm: ack_check:Check ack health (default: 0 [disabled]) (bool) >> parm: wd_disable:Disable stuck queue watchdog timer 0=system default, 1=disable, 2=enable (default: 0) (int) >> parm: bt_coex_active:enable wifi/bt co-exist (default: enable) (bool) >> parm: led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int) >> parm: power_save:enable WiFi power management (default: disable) (bool) >> parm: power_level:default power save level (range from 1 - 5, default: 1) (int) >> parm: auto_agg:enable agg w/o check traffic load (default: enable) (bool) >> parm: no_sleep_autoadjust:don't automatically adjust sleep level according to maximum network latency (default: true) (bool) >> > > All right, no debug in there. > I understand that you use compat. > Please clean everything: > > git clean -f -d -x > > Beware this will remove all the files that you have added there. This > won't remove the W/A you made to compile. ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-19 10:08 ` Dominik Feser @ 2012-04-19 13:16 ` Emmanuel Grumbach 2012-04-19 13:20 ` Dominik Feser 0 siblings, 1 reply; 48+ messages in thread From: Emmanuel Grumbach @ 2012-04-19 13:16 UTC (permalink / raw) To: Dominik Feser; +Cc: Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy On Thu, Apr 19, 2012 at 13:08, Dominik Feser <dominik.feser@googlemail.com> wrote: > Sice I downloaded compat-wireless manually and without git the command you proposed doesn't work. I would use git but I couldn't find a url to clone from. > Can you give a hint on that? > Just unpack the tar again. > > Am 19.04.2012 um 09:54 schrieb Emmanuel Grumbach: > >> On Thu, Apr 19, 2012 at 10:49, Dominik Feser >> <dominik.feser@googlemail.com> wrote: >>> Here is the output! And by the way, I really appreciate your help! Thank you! >>> >>> # modinfo iwlwifi >>> filename: /lib/modules/2.6.32.12-0.7.1/updates/drivers/net/wireless/iwlwifi/iwlwifi.ko >>> alias: iwlagn >>> license: GPL >>> author: Copyright(c) 2003-2012 Intel Corporation <ilw@linux.intel.com> >>> version: in-tree: >>> description: Intel(R) Wireless WiFi Link AGN driver for Linux >>> firmware: iwlwifi-5150-2.ucode >>> firmware: iwlwifi-5000-5.ucode >>> firmware: iwlwifi-6000g2b-6.ucode >>> firmware: iwlwifi-6000g2a-6.ucode >>> firmware: iwlwifi-6050-5.ucode >>> firmware: iwlwifi-6000-4.ucode >>> firmware: iwlwifi-100-6.ucode >>> firmware: iwlwifi-1000-6.ucode >>> firmware: iwlwifi-135-6.ucode >>> firmware: iwlwifi-105-6.ucode >>> firmware: iwlwifi-2030-6.ucode >>> firmware: iwlwifi-2000-6.ucode >>> srcversion: 169044416CC2B674049889B >>> alias: pci:v00008086d00000892sv*sd00000462bc*sc*i* >>> alias: pci:v00008086d00000893sv*sd00000262bc*sc*i* >>> alias: pci:v00008086d00000892sv*sd00000062bc*sc*i* >>> alias: pci:v00008086d00000894sv*sd00000822bc*sc*i* >>> alias: pci:v00008086d00000894sv*sd00000422bc*sc*i* >>> alias: pci:v00008086d00000895sv*sd00000222bc*sc*i* >>> alias: pci:v00008086d00000894sv*sd00000022bc*sc*i* >>> alias: pci:v00008086d0000088Esv*sd00004860bc*sc*i* >>> alias: pci:v00008086d0000088Esv*sd00004460bc*sc*i* >>> alias: pci:v00008086d0000088Fsv*sd00004260bc*sc*i* >>> alias: pci:v00008086d0000088Esv*sd00004060bc*sc*i* >>> alias: pci:v00008086d00000887sv*sd00004462bc*sc*i* >>> alias: pci:v00008086d00000888sv*sd00004262bc*sc*i* >>> alias: pci:v00008086d00000887sv*sd00004062bc*sc*i* >>> alias: pci:v00008086d00000890sv*sd00004822bc*sc*i* >>> alias: pci:v00008086d00000890sv*sd00004422bc*sc*i* >>> alias: pci:v00008086d00000891sv*sd00004222bc*sc*i* >>> alias: pci:v00008086d00000890sv*sd00004022bc*sc*i* >>> alias: pci:v00008086d00000896sv*sd00005027bc*sc*i* >>> alias: pci:v00008086d00000896sv*sd00005025bc*sc*i* >>> alias: pci:v00008086d00000897sv*sd00005017bc*sc*i* >>> alias: pci:v00008086d00000897sv*sd00005015bc*sc*i* >>> alias: pci:v00008086d00000896sv*sd00005007bc*sc*i* >>> alias: pci:v00008086d00000896sv*sd00005005bc*sc*i* >>> alias: pci:v00008086d000008AEsv*sd00001027bc*sc*i* >>> alias: pci:v00008086d000008AEsv*sd00001025bc*sc*i* >>> alias: pci:v00008086d000008AFsv*sd00001017bc*sc*i* >>> alias: pci:v00008086d000008AFsv*sd00001015bc*sc*i* >>> alias: pci:v00008086d000008AEsv*sd00001007bc*sc*i* >>> alias: pci:v00008086d000008AEsv*sd00001005bc*sc*i* >>> alias: pci:v00008086d00000084sv*sd00001316bc*sc*i* >>> alias: pci:v00008086d00000084sv*sd00001216bc*sc*i* >>> alias: pci:v00008086d00000083sv*sd00001326bc*sc*i* >>> alias: pci:v00008086d00000083sv*sd00001226bc*sc*i* >>> alias: pci:v00008086d00000083sv*sd00001306bc*sc*i* >>> alias: pci:v00008086d00000083sv*sd00001206bc*sc*i* >>> alias: pci:v00008086d00000084sv*sd00001315bc*sc*i* >>> alias: pci:v00008086d00000084sv*sd00001215bc*sc*i* >>> alias: pci:v00008086d00000083sv*sd00001325bc*sc*i* >>> alias: pci:v00008086d00000083sv*sd00001225bc*sc*i* >>> alias: pci:v00008086d00000083sv*sd00001305bc*sc*i* >>> alias: pci:v00008086d00000083sv*sd00001205bc*sc*i* >>> alias: pci:v00008086d00000886sv*sd00001317bc*sc*i* >>> alias: pci:v00008086d00000886sv*sd00001315bc*sc*i* >>> alias: pci:v00008086d00000885sv*sd00001327bc*sc*i* >>> alias: pci:v00008086d00000885sv*sd00001325bc*sc*i* >>> alias: pci:v00008086d00000885sv*sd00001307bc*sc*i* >>> alias: pci:v00008086d00000885sv*sd00001305bc*sc*i* >>> alias: pci:v00008086d00000089sv*sd00001316bc*sc*i* >>> alias: pci:v00008086d00000089sv*sd00001311bc*sc*i* >>> alias: pci:v00008086d00000087sv*sd00001326bc*sc*i* >>> alias: pci:v00008086d00000087sv*sd00001321bc*sc*i* >>> alias: pci:v00008086d00000087sv*sd00001306bc*sc*i* >>> alias: pci:v00008086d00000087sv*sd00001301bc*sc*i* >>> alias: pci:v00008086d00000091sv*sd00005226bc*sc*i* >>> alias: pci:v00008086d00000091sv*sd00005225bc*sc*i* >>> alias: pci:v00008086d00000091sv*sd00005221bc*sc*i* >>> alias: pci:v00008086d00000091sv*sd00005207bc*sc*i* >>> alias: pci:v00008086d00000091sv*sd00005206bc*sc*i* >>> alias: pci:v00008086d00000091sv*sd00005205bc*sc*i* >>> alias: pci:v00008086d00000091sv*sd00005201bc*sc*i* >>> alias: pci:v00008086d00000090sv*sd00005216bc*sc*i* >>> alias: pci:v00008086d00000090sv*sd00005215bc*sc*i* >>> alias: pci:v00008086d00000090sv*sd00005211bc*sc*i* >>> alias: pci:v00008086d0000008Bsv*sd00005317bc*sc*i* >>> alias: pci:v00008086d0000008Bsv*sd00005315bc*sc*i* >>> alias: pci:v00008086d0000008Asv*sd00005327bc*sc*i* >>> alias: pci:v00008086d0000008Asv*sd00005325bc*sc*i* >>> alias: pci:v00008086d0000008Asv*sd00005307bc*sc*i* >>> alias: pci:v00008086d0000008Asv*sd00005305bc*sc*i* >>> alias: pci:v00008086d00000082sv*sd00001305bc*sc*i* >>> alias: pci:v00008086d00000082sv*sd00001304bc*sc*i* >>> alias: pci:v00008086d00000082sv*sd00004820bc*sc*i* >>> alias: pci:v00008086d00000085sv*sd0000C220bc*sc*i* >>> alias: pci:v00008086d00000082sv*sd0000C020bc*sc*i* >>> alias: pci:v00008086d00000085sv*sd00001316bc*sc*i* >>> alias: pci:v00008086d00000085sv*sd00001311bc*sc*i* >>> alias: pci:v00008086d00000082sv*sd00001326bc*sc*i* >>> alias: pci:v00008086d00000082sv*sd00001321bc*sc*i* >>> alias: pci:v00008086d00000082sv*sd00001307bc*sc*i* >>> alias: pci:v00008086d00000082sv*sd00001306bc*sc*i* >>> alias: pci:v00008086d00000082sv*sd00001301bc*sc*i* >>> alias: pci:v00008086d00004239sv*sd00001316bc*sc*i* >>> alias: pci:v00008086d00004239sv*sd00001311bc*sc*i* >>> alias: pci:v00008086d00004238sv*sd00001111bc*sc*i* >>> alias: pci:v00008086d0000422Csv*sd00001326bc*sc*i* >>> alias: pci:v00008086d0000422Csv*sd00001321bc*sc*i* >>> alias: pci:v00008086d0000422Csv*sd00001307bc*sc*i* >>> alias: pci:v00008086d0000422Csv*sd00001306bc*sc*i* >>> alias: pci:v00008086d0000422Csv*sd00001301bc*sc*i* >>> alias: pci:v00008086d0000422Bsv*sd00001121bc*sc*i* >>> alias: pci:v00008086d0000422Bsv*sd00001101bc*sc*i* >>> alias: pci:v00008086d0000423Dsv*sd00001316bc*sc*i* >>> alias: pci:v00008086d0000423Dsv*sd00001216bc*sc*i* >>> alias: pci:v00008086d0000423Dsv*sd00001311bc*sc*i* >>> alias: pci:v00008086d0000423Dsv*sd00001211bc*sc*i* >>> alias: pci:v00008086d0000423Csv*sd00001321bc*sc*i* >>> alias: pci:v00008086d0000423Csv*sd00001221bc*sc*i* >>> alias: pci:v00008086d0000423Csv*sd00001306bc*sc*i* >>> alias: pci:v00008086d0000423Csv*sd00001206bc*sc*i* >>> alias: pci:v00008086d0000423Csv*sd00001301bc*sc*i* >>> alias: pci:v00008086d0000423Csv*sd00001201bc*sc*i* >>> alias: pci:v00008086d0000423Bsv*sd00001011bc*sc*i* >>> alias: pci:v00008086d0000423Asv*sd00001021bc*sc*i* >>> alias: pci:v00008086d0000423Asv*sd00001001bc*sc*i* >>> alias: pci:v00008086d00004236sv*sd00001114bc*sc*i* >>> alias: pci:v00008086d00004236sv*sd00001014bc*sc*i* >>> alias: pci:v00008086d00004236sv*sd00001111bc*sc*i* >>> alias: pci:v00008086d00004236sv*sd00001011bc*sc*i* >>> alias: pci:v00008086d00004235sv*sd00001104bc*sc*i* >>> alias: pci:v00008086d00004235sv*sd00001004bc*sc*i* >>> alias: pci:v00008086d00004235sv*sd00001101bc*sc*i* >>> alias: pci:v00008086d00004235sv*sd00001001bc*sc*i* >>> alias: pci:v00008086d00004235sv*sd00001124bc*sc*i* >>> alias: pci:v00008086d00004235sv*sd00001024bc*sc*i* >>> alias: pci:v00008086d00004235sv*sd00001121bc*sc*i* >>> alias: pci:v00008086d00004235sv*sd00001021bc*sc*i* >>> alias: pci:v00008086d00004237sv*sd00001316bc*sc*i* >>> alias: pci:v00008086d00004237sv*sd00001216bc*sc*i* >>> alias: pci:v00008086d00004237sv*sd00001315bc*sc*i* >>> alias: pci:v00008086d00004237sv*sd00001215bc*sc*i* >>> alias: pci:v00008086d00004237sv*sd00001314bc*sc*i* >>> alias: pci:v00008086d00004237sv*sd00001214bc*sc*i* >>> alias: pci:v00008086d00004237sv*sd00001311bc*sc*i* >>> alias: pci:v00008086d00004237sv*sd00001211bc*sc*i* >>> alias: pci:v00008086d00004232sv*sd00001326bc*sc*i* >>> alias: pci:v00008086d00004232sv*sd00001226bc*sc*i* >>> alias: pci:v00008086d00004232sv*sd00001325bc*sc*i* >>> alias: pci:v00008086d00004232sv*sd00001225bc*sc*i* >>> alias: pci:v00008086d00004232sv*sd00001324bc*sc*i* >>> alias: pci:v00008086d00004232sv*sd00001224bc*sc*i* >>> alias: pci:v00008086d00004232sv*sd00001321bc*sc*i* >>> alias: pci:v00008086d00004232sv*sd00001221bc*sc*i* >>> alias: pci:v00008086d00004232sv*sd00001306bc*sc*i* >>> alias: pci:v00008086d00004232sv*sd00001206bc*sc*i* >>> alias: pci:v00008086d00004232sv*sd00001305bc*sc*i* >>> alias: pci:v00008086d00004232sv*sd00001205bc*sc*i* >>> alias: pci:v00008086d00004232sv*sd00001304bc*sc*i* >>> alias: pci:v00008086d00004232sv*sd00001204bc*sc*i* >>> alias: pci:v00008086d00004232sv*sd00001301bc*sc*i* >>> alias: pci:v00008086d00004232sv*sd00001201bc*sc*i* >>> depends: mac80211,compat,led-class,cfg80211,compat_firmware_class >>> vermagic: 2.6.32.12-0.7.1 SMP mod_unload modversions Xen 686 >>> parm: swcrypto:using crypto in software (default 0 [hardware]) (int) >>> parm: 11n_disable:disable 11n functionality, bitmap: 1: full, 2: agg TX, 4: agg RX (uint) >>> parm: amsdu_size_8K:enable 8K amsdu size (int) >>> parm: fw_restart:restart firmware in case of error (int) >>> parm: ucode_alternative:specify ucode alternative to use from ucode file (int) >>> parm: antenna_coupling:specify antenna coupling in dB (defualt: 0 dB) (int) >>> parm: bt_ch_inhibition:Enable BT channel inhibition (default: enable) (bool) >>> parm: plcp_check:Check plcp health (default: 1 [enabled]) (bool) >>> parm: ack_check:Check ack health (default: 0 [disabled]) (bool) >>> parm: wd_disable:Disable stuck queue watchdog timer 0=system default, 1=disable, 2=enable (default: 0) (int) >>> parm: bt_coex_active:enable wifi/bt co-exist (default: enable) (bool) >>> parm: led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int) >>> parm: power_save:enable WiFi power management (default: disable) (bool) >>> parm: power_level:default power save level (range from 1 - 5, default: 1) (int) >>> parm: auto_agg:enable agg w/o check traffic load (default: enable) (bool) >>> parm: no_sleep_autoadjust:don't automatically adjust sleep level according to maximum network latency (default: true) (bool) >>> >> >> All right, no debug in there. >> I understand that you use compat. >> Please clean everything: >> >> git clean -f -d -x >> >> Beware this will remove all the files that you have added there. This >> won't remove the W/A you made to compile. > ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-19 13:16 ` Emmanuel Grumbach @ 2012-04-19 13:20 ` Dominik Feser 2012-04-19 13:24 ` Johannes Berg 0 siblings, 1 reply; 48+ messages in thread From: Dominik Feser @ 2012-04-19 13:20 UTC (permalink / raw) To: Emmanuel Grumbach Cc: Dominik Feser, Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy Ah ok, this is what I did several times now. After unpacking there is no .config file. After running the driver-select script and making the driver the first time the .config file appears. Just then it seems to me that f I add the debug line to .config and remake this isn't recognized by the make... Am 19.04.2012 um 15:16 schrieb Emmanuel Grumbach: > On Thu, Apr 19, 2012 at 13:08, Dominik Feser > <dominik.feser@googlemail.com> wrote: >> Sice I downloaded compat-wireless manually and without git the command you proposed doesn't work. I would use git but I couldn't find a url to clone from. >> Can you give a hint on that? >> > > Just unpack the tar again. > >> >> Am 19.04.2012 um 09:54 schrieb Emmanuel Grumbach: >> >>> On Thu, Apr 19, 2012 at 10:49, Dominik Feser >>> <dominik.feser@googlemail.com> wrote: >>>> Here is the output! And by the way, I really appreciate your help! Thank you! >>>> >>>> # modinfo iwlwifi >>>> filename: /lib/modules/2.6.32.12-0.7.1/updates/drivers/net/wireless/iwlwifi/iwlwifi.ko >>>> alias: iwlagn >>>> license: GPL >>>> author: Copyright(c) 2003-2012 Intel Corporation <ilw@linux.intel.com> >>>> version: in-tree: >>>> description: Intel(R) Wireless WiFi Link AGN driver for Linux >>>> firmware: iwlwifi-5150-2.ucode >>>> firmware: iwlwifi-5000-5.ucode >>>> firmware: iwlwifi-6000g2b-6.ucode >>>> firmware: iwlwifi-6000g2a-6.ucode >>>> firmware: iwlwifi-6050-5.ucode >>>> firmware: iwlwifi-6000-4.ucode >>>> firmware: iwlwifi-100-6.ucode >>>> firmware: iwlwifi-1000-6.ucode >>>> firmware: iwlwifi-135-6.ucode >>>> firmware: iwlwifi-105-6.ucode >>>> firmware: iwlwifi-2030-6.ucode >>>> firmware: iwlwifi-2000-6.ucode >>>> srcversion: 169044416CC2B674049889B >>>> alias: pci:v00008086d00000892sv*sd00000462bc*sc*i* >>>> alias: pci:v00008086d00000893sv*sd00000262bc*sc*i* >>>> alias: pci:v00008086d00000892sv*sd00000062bc*sc*i* >>>> alias: pci:v00008086d00000894sv*sd00000822bc*sc*i* >>>> alias: pci:v00008086d00000894sv*sd00000422bc*sc*i* >>>> alias: pci:v00008086d00000895sv*sd00000222bc*sc*i* >>>> alias: pci:v00008086d00000894sv*sd00000022bc*sc*i* >>>> alias: pci:v00008086d0000088Esv*sd00004860bc*sc*i* >>>> alias: pci:v00008086d0000088Esv*sd00004460bc*sc*i* >>>> alias: pci:v00008086d0000088Fsv*sd00004260bc*sc*i* >>>> alias: pci:v00008086d0000088Esv*sd00004060bc*sc*i* >>>> alias: pci:v00008086d00000887sv*sd00004462bc*sc*i* >>>> alias: pci:v00008086d00000888sv*sd00004262bc*sc*i* >>>> alias: pci:v00008086d00000887sv*sd00004062bc*sc*i* >>>> alias: pci:v00008086d00000890sv*sd00004822bc*sc*i* >>>> alias: pci:v00008086d00000890sv*sd00004422bc*sc*i* >>>> alias: pci:v00008086d00000891sv*sd00004222bc*sc*i* >>>> alias: pci:v00008086d00000890sv*sd00004022bc*sc*i* >>>> alias: pci:v00008086d00000896sv*sd00005027bc*sc*i* >>>> alias: pci:v00008086d00000896sv*sd00005025bc*sc*i* >>>> alias: pci:v00008086d00000897sv*sd00005017bc*sc*i* >>>> alias: pci:v00008086d00000897sv*sd00005015bc*sc*i* >>>> alias: pci:v00008086d00000896sv*sd00005007bc*sc*i* >>>> alias: pci:v00008086d00000896sv*sd00005005bc*sc*i* >>>> alias: pci:v00008086d000008AEsv*sd00001027bc*sc*i* >>>> alias: pci:v00008086d000008AEsv*sd00001025bc*sc*i* >>>> alias: pci:v00008086d000008AFsv*sd00001017bc*sc*i* >>>> alias: pci:v00008086d000008AFsv*sd00001015bc*sc*i* >>>> alias: pci:v00008086d000008AEsv*sd00001007bc*sc*i* >>>> alias: pci:v00008086d000008AEsv*sd00001005bc*sc*i* >>>> alias: pci:v00008086d00000084sv*sd00001316bc*sc*i* >>>> alias: pci:v00008086d00000084sv*sd00001216bc*sc*i* >>>> alias: pci:v00008086d00000083sv*sd00001326bc*sc*i* >>>> alias: pci:v00008086d00000083sv*sd00001226bc*sc*i* >>>> alias: pci:v00008086d00000083sv*sd00001306bc*sc*i* >>>> alias: pci:v00008086d00000083sv*sd00001206bc*sc*i* >>>> alias: pci:v00008086d00000084sv*sd00001315bc*sc*i* >>>> alias: pci:v00008086d00000084sv*sd00001215bc*sc*i* >>>> alias: pci:v00008086d00000083sv*sd00001325bc*sc*i* >>>> alias: pci:v00008086d00000083sv*sd00001225bc*sc*i* >>>> alias: pci:v00008086d00000083sv*sd00001305bc*sc*i* >>>> alias: pci:v00008086d00000083sv*sd00001205bc*sc*i* >>>> alias: pci:v00008086d00000886sv*sd00001317bc*sc*i* >>>> alias: pci:v00008086d00000886sv*sd00001315bc*sc*i* >>>> alias: pci:v00008086d00000885sv*sd00001327bc*sc*i* >>>> alias: pci:v00008086d00000885sv*sd00001325bc*sc*i* >>>> alias: pci:v00008086d00000885sv*sd00001307bc*sc*i* >>>> alias: pci:v00008086d00000885sv*sd00001305bc*sc*i* >>>> alias: pci:v00008086d00000089sv*sd00001316bc*sc*i* >>>> alias: pci:v00008086d00000089sv*sd00001311bc*sc*i* >>>> alias: pci:v00008086d00000087sv*sd00001326bc*sc*i* >>>> alias: pci:v00008086d00000087sv*sd00001321bc*sc*i* >>>> alias: pci:v00008086d00000087sv*sd00001306bc*sc*i* >>>> alias: pci:v00008086d00000087sv*sd00001301bc*sc*i* >>>> alias: pci:v00008086d00000091sv*sd00005226bc*sc*i* >>>> alias: pci:v00008086d00000091sv*sd00005225bc*sc*i* >>>> alias: pci:v00008086d00000091sv*sd00005221bc*sc*i* >>>> alias: pci:v00008086d00000091sv*sd00005207bc*sc*i* >>>> alias: pci:v00008086d00000091sv*sd00005206bc*sc*i* >>>> alias: pci:v00008086d00000091sv*sd00005205bc*sc*i* >>>> alias: pci:v00008086d00000091sv*sd00005201bc*sc*i* >>>> alias: pci:v00008086d00000090sv*sd00005216bc*sc*i* >>>> alias: pci:v00008086d00000090sv*sd00005215bc*sc*i* >>>> alias: pci:v00008086d00000090sv*sd00005211bc*sc*i* >>>> alias: pci:v00008086d0000008Bsv*sd00005317bc*sc*i* >>>> alias: pci:v00008086d0000008Bsv*sd00005315bc*sc*i* >>>> alias: pci:v00008086d0000008Asv*sd00005327bc*sc*i* >>>> alias: pci:v00008086d0000008Asv*sd00005325bc*sc*i* >>>> alias: pci:v00008086d0000008Asv*sd00005307bc*sc*i* >>>> alias: pci:v00008086d0000008Asv*sd00005305bc*sc*i* >>>> alias: pci:v00008086d00000082sv*sd00001305bc*sc*i* >>>> alias: pci:v00008086d00000082sv*sd00001304bc*sc*i* >>>> alias: pci:v00008086d00000082sv*sd00004820bc*sc*i* >>>> alias: pci:v00008086d00000085sv*sd0000C220bc*sc*i* >>>> alias: pci:v00008086d00000082sv*sd0000C020bc*sc*i* >>>> alias: pci:v00008086d00000085sv*sd00001316bc*sc*i* >>>> alias: pci:v00008086d00000085sv*sd00001311bc*sc*i* >>>> alias: pci:v00008086d00000082sv*sd00001326bc*sc*i* >>>> alias: pci:v00008086d00000082sv*sd00001321bc*sc*i* >>>> alias: pci:v00008086d00000082sv*sd00001307bc*sc*i* >>>> alias: pci:v00008086d00000082sv*sd00001306bc*sc*i* >>>> alias: pci:v00008086d00000082sv*sd00001301bc*sc*i* >>>> alias: pci:v00008086d00004239sv*sd00001316bc*sc*i* >>>> alias: pci:v00008086d00004239sv*sd00001311bc*sc*i* >>>> alias: pci:v00008086d00004238sv*sd00001111bc*sc*i* >>>> alias: pci:v00008086d0000422Csv*sd00001326bc*sc*i* >>>> alias: pci:v00008086d0000422Csv*sd00001321bc*sc*i* >>>> alias: pci:v00008086d0000422Csv*sd00001307bc*sc*i* >>>> alias: pci:v00008086d0000422Csv*sd00001306bc*sc*i* >>>> alias: pci:v00008086d0000422Csv*sd00001301bc*sc*i* >>>> alias: pci:v00008086d0000422Bsv*sd00001121bc*sc*i* >>>> alias: pci:v00008086d0000422Bsv*sd00001101bc*sc*i* >>>> alias: pci:v00008086d0000423Dsv*sd00001316bc*sc*i* >>>> alias: pci:v00008086d0000423Dsv*sd00001216bc*sc*i* >>>> alias: pci:v00008086d0000423Dsv*sd00001311bc*sc*i* >>>> alias: pci:v00008086d0000423Dsv*sd00001211bc*sc*i* >>>> alias: pci:v00008086d0000423Csv*sd00001321bc*sc*i* >>>> alias: pci:v00008086d0000423Csv*sd00001221bc*sc*i* >>>> alias: pci:v00008086d0000423Csv*sd00001306bc*sc*i* >>>> alias: pci:v00008086d0000423Csv*sd00001206bc*sc*i* >>>> alias: pci:v00008086d0000423Csv*sd00001301bc*sc*i* >>>> alias: pci:v00008086d0000423Csv*sd00001201bc*sc*i* >>>> alias: pci:v00008086d0000423Bsv*sd00001011bc*sc*i* >>>> alias: pci:v00008086d0000423Asv*sd00001021bc*sc*i* >>>> alias: pci:v00008086d0000423Asv*sd00001001bc*sc*i* >>>> alias: pci:v00008086d00004236sv*sd00001114bc*sc*i* >>>> alias: pci:v00008086d00004236sv*sd00001014bc*sc*i* >>>> alias: pci:v00008086d00004236sv*sd00001111bc*sc*i* >>>> alias: pci:v00008086d00004236sv*sd00001011bc*sc*i* >>>> alias: pci:v00008086d00004235sv*sd00001104bc*sc*i* >>>> alias: pci:v00008086d00004235sv*sd00001004bc*sc*i* >>>> alias: pci:v00008086d00004235sv*sd00001101bc*sc*i* >>>> alias: pci:v00008086d00004235sv*sd00001001bc*sc*i* >>>> alias: pci:v00008086d00004235sv*sd00001124bc*sc*i* >>>> alias: pci:v00008086d00004235sv*sd00001024bc*sc*i* >>>> alias: pci:v00008086d00004235sv*sd00001121bc*sc*i* >>>> alias: pci:v00008086d00004235sv*sd00001021bc*sc*i* >>>> alias: pci:v00008086d00004237sv*sd00001316bc*sc*i* >>>> alias: pci:v00008086d00004237sv*sd00001216bc*sc*i* >>>> alias: pci:v00008086d00004237sv*sd00001315bc*sc*i* >>>> alias: pci:v00008086d00004237sv*sd00001215bc*sc*i* >>>> alias: pci:v00008086d00004237sv*sd00001314bc*sc*i* >>>> alias: pci:v00008086d00004237sv*sd00001214bc*sc*i* >>>> alias: pci:v00008086d00004237sv*sd00001311bc*sc*i* >>>> alias: pci:v00008086d00004237sv*sd00001211bc*sc*i* >>>> alias: pci:v00008086d00004232sv*sd00001326bc*sc*i* >>>> alias: pci:v00008086d00004232sv*sd00001226bc*sc*i* >>>> alias: pci:v00008086d00004232sv*sd00001325bc*sc*i* >>>> alias: pci:v00008086d00004232sv*sd00001225bc*sc*i* >>>> alias: pci:v00008086d00004232sv*sd00001324bc*sc*i* >>>> alias: pci:v00008086d00004232sv*sd00001224bc*sc*i* >>>> alias: pci:v00008086d00004232sv*sd00001321bc*sc*i* >>>> alias: pci:v00008086d00004232sv*sd00001221bc*sc*i* >>>> alias: pci:v00008086d00004232sv*sd00001306bc*sc*i* >>>> alias: pci:v00008086d00004232sv*sd00001206bc*sc*i* >>>> alias: pci:v00008086d00004232sv*sd00001305bc*sc*i* >>>> alias: pci:v00008086d00004232sv*sd00001205bc*sc*i* >>>> alias: pci:v00008086d00004232sv*sd00001304bc*sc*i* >>>> alias: pci:v00008086d00004232sv*sd00001204bc*sc*i* >>>> alias: pci:v00008086d00004232sv*sd00001301bc*sc*i* >>>> alias: pci:v00008086d00004232sv*sd00001201bc*sc*i* >>>> depends: mac80211,compat,led-class,cfg80211,compat_firmware_class >>>> vermagic: 2.6.32.12-0.7.1 SMP mod_unload modversions Xen 686 >>>> parm: swcrypto:using crypto in software (default 0 [hardware]) (int) >>>> parm: 11n_disable:disable 11n functionality, bitmap: 1: full, 2: agg TX, 4: agg RX (uint) >>>> parm: amsdu_size_8K:enable 8K amsdu size (int) >>>> parm: fw_restart:restart firmware in case of error (int) >>>> parm: ucode_alternative:specify ucode alternative to use from ucode file (int) >>>> parm: antenna_coupling:specify antenna coupling in dB (defualt: 0 dB) (int) >>>> parm: bt_ch_inhibition:Enable BT channel inhibition (default: enable) (bool) >>>> parm: plcp_check:Check plcp health (default: 1 [enabled]) (bool) >>>> parm: ack_check:Check ack health (default: 0 [disabled]) (bool) >>>> parm: wd_disable:Disable stuck queue watchdog timer 0=system default, 1=disable, 2=enable (default: 0) (int) >>>> parm: bt_coex_active:enable wifi/bt co-exist (default: enable) (bool) >>>> parm: led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int) >>>> parm: power_save:enable WiFi power management (default: disable) (bool) >>>> parm: power_level:default power save level (range from 1 - 5, default: 1) (int) >>>> parm: auto_agg:enable agg w/o check traffic load (default: enable) (bool) >>>> parm: no_sleep_autoadjust:don't automatically adjust sleep level according to maximum network latency (default: true) (bool) >>>> >>> >>> All right, no debug in there. >>> I understand that you use compat. >>> Please clean everything: >>> >>> git clean -f -d -x >>> >>> Beware this will remove all the files that you have added there. This >>> won't remove the W/A you made to compile. >> ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-19 13:20 ` Dominik Feser @ 2012-04-19 13:24 ` Johannes Berg 2012-04-19 14:09 ` Dominik Feser 0 siblings, 1 reply; 48+ messages in thread From: Johannes Berg @ 2012-04-19 13:24 UTC (permalink / raw) To: Dominik Feser Cc: Emmanuel Grumbach, Arend van Spriel, linux-wireless, Wey-Yi Guy On 4/19/2012 6:20 AM, Dominik Feser wrote: > Ah ok, this is what I did several times now. After unpacking there is no .config file. After running the driver-select script and making the driver the first time the .config file appears. > Just then it seems to me that f I add the debug line to .config and remake this isn't recognized by the make... You should modify config.mk, not .config johannes ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-19 13:24 ` Johannes Berg @ 2012-04-19 14:09 ` Dominik Feser 2012-04-19 14:20 ` Johannes Berg 0 siblings, 1 reply; 48+ messages in thread From: Dominik Feser @ 2012-04-19 14:09 UTC (permalink / raw) To: Johannes Berg Cc: Dominik Feser, Emmanuel Grumbach, Arend van Spriel, linux-wireless, Wey-Yi Guy Finally, here is the output of dmesg after recompiling: iwlwifi 0000:02:00.0: edd19e18 iwlwifi 0000:02:00.0: d55c1e18 iwlwifi 0000:02:00.0: d55c1ddc iwlwifi 0000:02:00.0: PCI INT A disabled Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d Copyright(c) 2003-2012 Intel Corporation iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlwifi 0000:02:00.0: setting latency timer to 64 iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 iwlwifi 0000:02:00.0: pci_resource_base = f447c000 iwlwifi 0000:02:00.0: HW Revision ID = 0x34 iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X iwlwifi 0000:02:00.0: U iwl_request_firmware d5b37d70 iwlwifi 0000:02:00.0: U iwl_request_firmware e09ebdd4 iwlwifi 0000:02:00.0: ee2afe18 iwlwifi 0000:02:00.0: U iwl_request_firmware ee2afdd4 iwlwifi 0000:02:00.0: cc93fe18 iwlwifi 0000:02:00.0: cc93fddc iwlwifi 0000:02:00.0: U iwl_trans_pcie_rx_free cc93fd80 iwlwifi 0000:02:00.0: PCI INT A disabled Am 19.04.2012 um 15:24 schrieb Johannes Berg: > On 4/19/2012 6:20 AM, Dominik Feser wrote: >> Ah ok, this is what I did several times now. After unpacking there is no .config file. After running the driver-select script and making the driver the first time the .config file appears. >> Just then it seems to me that f I add the debug line to .config and remake this isn't recognized by the make... > > You should modify config.mk, not .config > > johannes ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-19 14:09 ` Dominik Feser @ 2012-04-19 14:20 ` Johannes Berg 2012-04-19 15:08 ` Dominik Feser 0 siblings, 1 reply; 48+ messages in thread From: Johannes Berg @ 2012-04-19 14:20 UTC (permalink / raw) To: Dominik Feser Cc: Emmanuel Grumbach, Arend van Spriel, linux-wireless, Wey-Yi Guy On 4/19/2012 7:09 AM, Dominik Feser wrote: > Finally, here is the output of dmesg after recompiling: > > iwlwifi 0000:02:00.0: edd19e18 > iwlwifi 0000:02:00.0: d55c1e18 > iwlwifi 0000:02:00.0: d55c1ddc > iwlwifi 0000:02:00.0: PCI INT A disabled > Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d > Copyright(c) 2003-2012 Intel Corporation > iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > iwlwifi 0000:02:00.0: setting latency timer to 64 > iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 > iwlwifi 0000:02:00.0: pci_resource_base = f447c000 > iwlwifi 0000:02:00.0: HW Revision ID = 0x34 > iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X > iwlwifi 0000:02:00.0: U iwl_request_firmware d5b37d70 > iwlwifi 0000:02:00.0: U iwl_request_firmware e09ebdd4 > iwlwifi 0000:02:00.0: ee2afe18 > iwlwifi 0000:02:00.0: U iwl_request_firmware ee2afdd4 > iwlwifi 0000:02:00.0: cc93fe18 > iwlwifi 0000:02:00.0: cc93fddc Still pretty useless since you get %pV printed as a pointer rather than a message. Does anyone know how to fix that in compat? But the iwl_request_firmware 3 times probably means it failed? johannes ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-19 14:20 ` Johannes Berg @ 2012-04-19 15:08 ` Dominik Feser 2012-04-19 16:19 ` Emmanuel Grumbach 0 siblings, 1 reply; 48+ messages in thread From: Dominik Feser @ 2012-04-19 15:08 UTC (permalink / raw) To: Johannes Berg Cc: Dominik Feser, Emmanuel Grumbach, Arend van Spriel, linux-wireless, Wey-Yi Guy May it be that the fact that Centos 5 doesnt have hotplug causes the issue? Am 19.04.2012 um 16:20 schrieb Johannes Berg: > On 4/19/2012 7:09 AM, Dominik Feser wrote: >> Finally, here is the output of dmesg after recompiling: >> >> iwlwifi 0000:02:00.0: edd19e18 >> iwlwifi 0000:02:00.0: d55c1e18 >> iwlwifi 0000:02:00.0: d55c1ddc >> iwlwifi 0000:02:00.0: PCI INT A disabled >> Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d >> Copyright(c) 2003-2012 Intel Corporation >> iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >> iwlwifi 0000:02:00.0: setting latency timer to 64 >> iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 >> iwlwifi 0000:02:00.0: pci_resource_base = f447c000 >> iwlwifi 0000:02:00.0: HW Revision ID = 0x34 >> iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X >> iwlwifi 0000:02:00.0: U iwl_request_firmware d5b37d70 >> iwlwifi 0000:02:00.0: U iwl_request_firmware e09ebdd4 >> iwlwifi 0000:02:00.0: ee2afe18 >> iwlwifi 0000:02:00.0: U iwl_request_firmware ee2afdd4 >> iwlwifi 0000:02:00.0: cc93fe18 >> iwlwifi 0000:02:00.0: cc93fddc > > Still pretty useless since you get %pV printed as a pointer rather than a message. Does anyone know how to fix that in compat? But the iwl_request_firmware 3 times probably means it failed? > > johannes ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-19 15:08 ` Dominik Feser @ 2012-04-19 16:19 ` Emmanuel Grumbach 2012-04-19 17:26 ` Dominik Feser 2012-04-22 13:00 ` Dominik Feser 0 siblings, 2 replies; 48+ messages in thread From: Emmanuel Grumbach @ 2012-04-19 16:19 UTC (permalink / raw) To: Dominik Feser; +Cc: Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy [-- Attachment #1: Type: text/plain, Size: 1706 bytes --] On Thu, Apr 19, 2012 at 18:08, Dominik Feser <dominik.feser@googlemail.com> wrote: > May it be that the fact that Centos 5 doesnt have hotplug causes the issue? > Don't think so. Can it be a problem in the backport of request_firwamre_no_wait ? Did I see somewhere that you run 2.6.38 ? Can you check again after having applied the patch attached ? from the main dir of compat: patch -p1 < print.patch Thanks > Am 19.04.2012 um 16:20 schrieb Johannes Berg: > >> On 4/19/2012 7:09 AM, Dominik Feser wrote: >>> Finally, here is the output of dmesg after recompiling: >>> >>> iwlwifi 0000:02:00.0: edd19e18 >>> iwlwifi 0000:02:00.0: d55c1e18 >>> iwlwifi 0000:02:00.0: d55c1ddc >>> iwlwifi 0000:02:00.0: PCI INT A disabled >>> Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d >>> Copyright(c) 2003-2012 Intel Corporation >>> iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>> iwlwifi 0000:02:00.0: setting latency timer to 64 >>> iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 >>> iwlwifi 0000:02:00.0: pci_resource_base = f447c000 >>> iwlwifi 0000:02:00.0: HW Revision ID = 0x34 >>> iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X >>> iwlwifi 0000:02:00.0: U iwl_request_firmware d5b37d70 >>> iwlwifi 0000:02:00.0: U iwl_request_firmware e09ebdd4 >>> iwlwifi 0000:02:00.0: ee2afe18 >>> iwlwifi 0000:02:00.0: U iwl_request_firmware ee2afdd4 >>> iwlwifi 0000:02:00.0: cc93fe18 >>> iwlwifi 0000:02:00.0: cc93fddc >> >> Still pretty useless since you get %pV printed as a pointer rather than a message. Does anyone know how to fix that in compat? But the iwl_request_firmware 3 times probably means it failed? >> >> johannes > [-- Attachment #2: print.patch --] [-- Type: application/octet-stream, Size: 604 bytes --] diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c index 80b1438..5773a60 100644 --- a/drivers/net/wireless/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/iwlwifi/iwl-drv.c @@ -185,7 +185,7 @@ static int iwl_request_firmware(struct iwl_drv *drv, bool first) sprintf(drv->firmware_name, "%s%s%s", name_pre, tag, ".ucode"); - IWL_DEBUG_INFO(drv, "attempting to load firmware %s'%s'\n", + dev_err(drv->dev, "attempting to load firmware %s'%s'\n", (drv->fw_index == UCODE_EXPERIMENTAL_INDEX) ? "EXPERIMENTAL " : "", drv->firmware_name); ^ permalink raw reply related [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-19 16:19 ` Emmanuel Grumbach @ 2012-04-19 17:26 ` Dominik Feser 2012-04-19 18:04 ` Emmanuel Grumbach 2012-04-22 13:00 ` Dominik Feser 1 sibling, 1 reply; 48+ messages in thread From: Dominik Feser @ 2012-04-19 17:26 UTC (permalink / raw) To: Emmanuel Grumbach Cc: Dominik Feser, Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy After applying the patch make comes up with: # make ./scripts/gen-compat-autoconf.sh /root/compat-wireless-3.4-rc1-2/.config /root/compat-wireless-3.4-rc1-2/config.mk > include/linux/compat_autoconf.h make -C /lib/modules/2.6.32.12-0.7.1/build M=/root/compat-wireless-3.4-rc1-2 modules make[1]: Entering directory `/mnt/src/redhat/BUILD/kernel-2.6.32.120.7.1' CC [M] /root/compat-wireless-3.4-rc1-2/compat/main.o CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat-2.6.33.o CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat-2.6.35.o CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat-2.6.36.o CC [M] /root/compat-wireless-3.4-rc1-2/compat/kfifo.o CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat-2.6.37.o CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat-2.6.38.o CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat-2.6.39.o CC [M] /root/compat-wireless-3.4-rc1-2/compat/kstrtox.o CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat-3.0.o CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat-3.2.o CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat-3.3.o CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat-3.5.o CC [M] /root/compat-wireless-3.4-rc1-2/compat/cordic.o CC [M] /root/compat-wireless-3.4-rc1-2/compat/crc8.o CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat_atomic.o LD [M] /root/compat-wireless-3.4-rc1-2/compat/compat.o CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat_firmware_class.o CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-agn.o CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-agn-rs.o CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-mac80211.o /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-mac80211.c: In function »iwlagn_mac_resume«: /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-mac80211.c:440: Warnung: Variable »img« wird nicht verwendet CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-ucode.o CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-agn-tx.o CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-debug.o CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-agn-lib.o CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-agn-calib.o CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-io.o CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-agn-tt.o CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-agn-sta.o CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-agn-rx.o CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-core.o CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-eeprom.o CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-power.o CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-scan.o CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-led.o CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-agn-rxon.o CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-5000.o CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-6000.o CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-1000.o CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-2000.o CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-pci.o CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-drv.o /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-drv.c: In function »iwl_request_firmware«: /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-drv.c:183: Fehler: »struct iwl_drv« hat kein Element namens »dev« /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-drv.c:183: Fehler: »struct iwl_drv« hat kein Element namens »dev« make[4]: *** [/root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-drv.o] Fehler 1 make[3]: *** [/root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi] Fehler 2 make[2]: *** [/root/compat-wireless-3.4-rc1-2/drivers/net/wireless] Fehler 2 make[1]: *** [_module_/root/compat-wireless-3.4-rc1-2] Fehler 2 make[1]: Leaving directory `/mnt/src/redhat/BUILD/kernel-2.6.32.120.7.1' make: *** [modules] Fehler 2 the geman text means: struct iwl_drv has no element with name dev Am 19.04.2012 um 18:19 schrieb Emmanuel Grumbach: > On Thu, Apr 19, 2012 at 18:08, Dominik Feser > <dominik.feser@googlemail.com> wrote: >> May it be that the fact that Centos 5 doesnt have hotplug causes the issue? >> > > Don't think so. > Can it be a problem in the backport of request_firwamre_no_wait ? > Did I see somewhere that you run 2.6.38 ? > Can you check again after having applied the patch attached ? > > from the main dir of compat: > patch -p1 < print.patch > > Thanks > >> Am 19.04.2012 um 16:20 schrieb Johannes Berg: >> >>> On 4/19/2012 7:09 AM, Dominik Feser wrote: >>>> Finally, here is the output of dmesg after recompiling: >>>> >>>> iwlwifi 0000:02:00.0: edd19e18 >>>> iwlwifi 0000:02:00.0: d55c1e18 >>>> iwlwifi 0000:02:00.0: d55c1ddc >>>> iwlwifi 0000:02:00.0: PCI INT A disabled >>>> Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d >>>> Copyright(c) 2003-2012 Intel Corporation >>>> iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>>> iwlwifi 0000:02:00.0: setting latency timer to 64 >>>> iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 >>>> iwlwifi 0000:02:00.0: pci_resource_base = f447c000 >>>> iwlwifi 0000:02:00.0: HW Revision ID = 0x34 >>>> iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X >>>> iwlwifi 0000:02:00.0: U iwl_request_firmware d5b37d70 >>>> iwlwifi 0000:02:00.0: U iwl_request_firmware e09ebdd4 >>>> iwlwifi 0000:02:00.0: ee2afe18 >>>> iwlwifi 0000:02:00.0: U iwl_request_firmware ee2afdd4 >>>> iwlwifi 0000:02:00.0: cc93fe18 >>>> iwlwifi 0000:02:00.0: cc93fddc >>> >>> Still pretty useless since you get %pV printed as a pointer rather than a message. Does anyone know how to fix that in compat? But the iwl_request_firmware 3 times probably means it failed? >>> >>> johannes >> > <print.patch> ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-19 17:26 ` Dominik Feser @ 2012-04-19 18:04 ` Emmanuel Grumbach 2012-04-20 6:42 ` Dominik Feser 0 siblings, 1 reply; 48+ messages in thread From: Emmanuel Grumbach @ 2012-04-19 18:04 UTC (permalink / raw) To: Dominik Feser; +Cc: Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy On Thu, Apr 19, 2012 at 20:26, Dominik Feser <dominik.feser@googlemail.com> wrote: > After applying the patch make comes up with: > > # make > ./scripts/gen-compat-autoconf.sh /root/compat-wireless-3.4-rc1-2/.config /root/compat-wireless-3.4-rc1-2/config.mk > include/linux/compat_autoconf.h > make -C /lib/modules/2.6.32.12-0.7.1/build M=/root/compat-wireless-3.4-rc1-2 modules > make[1]: Entering directory `/mnt/src/redhat/BUILD/kernel-2.6.32.120.7.1' > CC [M] /root/compat-wireless-3.4-rc1-2/compat/main.o > CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat-2.6.33.o > CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat-2.6.35.o > CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat-2.6.36.o > CC [M] /root/compat-wireless-3.4-rc1-2/compat/kfifo.o > CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat-2.6.37.o > CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat-2.6.38.o > CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat-2.6.39.o > CC [M] /root/compat-wireless-3.4-rc1-2/compat/kstrtox.o > CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat-3.0.o > CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat-3.2.o > CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat-3.3.o > CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat-3.5.o > CC [M] /root/compat-wireless-3.4-rc1-2/compat/cordic.o > CC [M] /root/compat-wireless-3.4-rc1-2/compat/crc8.o > CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat_atomic.o > LD [M] /root/compat-wireless-3.4-rc1-2/compat/compat.o > CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat_firmware_class.o > CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-agn.o > CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-agn-rs.o > CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-mac80211.o > /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-mac80211.c: In function »iwlagn_mac_resume«: > /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-mac80211.c:440: Warnung: Variable »img« wird nicht verwendet > CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-ucode.o > CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-agn-tx.o > CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-debug.o > CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-agn-lib.o > CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-agn-calib.o > CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-io.o > CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-agn-tt.o > CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-agn-sta.o > CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-agn-rx.o > CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-core.o > CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-eeprom.o > CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-power.o > CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-scan.o > CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-led.o > CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-agn-rxon.o > CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-5000.o > CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-6000.o > CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-1000.o > CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-2000.o > CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-pci.o > CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-drv.o > /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-drv.c: In function »iwl_request_firmware«: > /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-drv.c:183: Fehler: »struct iwl_drv« hat kein Element namens »dev« > /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-drv.c:183: Fehler: »struct iwl_drv« hat kein Element namens »dev« > make[4]: *** [/root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-drv.o] Fehler 1 > make[3]: *** [/root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi] Fehler 2 > make[2]: *** [/root/compat-wireless-3.4-rc1-2/drivers/net/wireless] Fehler 2 > make[1]: *** [_module_/root/compat-wireless-3.4-rc1-2] Fehler 2 > make[1]: Leaving directory `/mnt/src/redhat/BUILD/kernel-2.6.32.120.7.1' > make: *** [modules] Fehler 2 > > the geman text means: > struct iwl_drv has no element with name dev > Yeah I know. I have some souvenirs from the years I was dreaming in my german classes. We did a lot of changes in our driver in the last months and our code bases is probably different. Can you please tell me where you took your compat from (sorry... I don't really know...) and I will make a patch based on your code. I am not sure this will be before next week though... > > Am 19.04.2012 um 18:19 schrieb Emmanuel Grumbach: > >> On Thu, Apr 19, 2012 at 18:08, Dominik Feser >> <dominik.feser@googlemail.com> wrote: >>> May it be that the fact that Centos 5 doesnt have hotplug causes the issue? >>> >> >> Don't think so. >> Can it be a problem in the backport of request_firwamre_no_wait ? >> Did I see somewhere that you run 2.6.38 ? >> Can you check again after having applied the patch attached ? >> >> from the main dir of compat: >> patch -p1 < print.patch >> >> Thanks >> >>> Am 19.04.2012 um 16:20 schrieb Johannes Berg: >>> >>>> On 4/19/2012 7:09 AM, Dominik Feser wrote: >>>>> Finally, here is the output of dmesg after recompiling: >>>>> >>>>> iwlwifi 0000:02:00.0: edd19e18 >>>>> iwlwifi 0000:02:00.0: d55c1e18 >>>>> iwlwifi 0000:02:00.0: d55c1ddc >>>>> iwlwifi 0000:02:00.0: PCI INT A disabled >>>>> Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d >>>>> Copyright(c) 2003-2012 Intel Corporation >>>>> iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>>>> iwlwifi 0000:02:00.0: setting latency timer to 64 >>>>> iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 >>>>> iwlwifi 0000:02:00.0: pci_resource_base = f447c000 >>>>> iwlwifi 0000:02:00.0: HW Revision ID = 0x34 >>>>> iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X >>>>> iwlwifi 0000:02:00.0: U iwl_request_firmware d5b37d70 >>>>> iwlwifi 0000:02:00.0: U iwl_request_firmware e09ebdd4 >>>>> iwlwifi 0000:02:00.0: ee2afe18 >>>>> iwlwifi 0000:02:00.0: U iwl_request_firmware ee2afdd4 >>>>> iwlwifi 0000:02:00.0: cc93fe18 >>>>> iwlwifi 0000:02:00.0: cc93fddc >>>> >>>> Still pretty useless since you get %pV printed as a pointer rather than a message. Does anyone know how to fix that in compat? But the iwl_request_firmware 3 times probably means it failed? >>>> >>>> johannes >>> >> <print.patch> > ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-19 18:04 ` Emmanuel Grumbach @ 2012-04-20 6:42 ` Dominik Feser 2012-04-22 5:23 ` Emmanuel Grumbach 0 siblings, 1 reply; 48+ messages in thread From: Dominik Feser @ 2012-04-20 6:42 UTC (permalink / raw) To: Emmanuel Grumbach Cc: Dominik Feser, Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy I downloaded the latest release from here: http://linuxwireless.org/en/users/Download/stable/ which is http://www.orbit-lab.org/kernel/compat-wireless-3-stable/v3.4/compat-wireless-3.4-rc3-1.tar.bz2 Thx in advance, Emmanuel! Am 19.04.2012 um 20:04 schrieb Emmanuel Grumbach: > On Thu, Apr 19, 2012 at 20:26, Dominik Feser > <dominik.feser@googlemail.com> wrote: >> After applying the patch make comes up with: >> >> # make >> ./scripts/gen-compat-autoconf.sh /root/compat-wireless-3.4-rc1-2/.config /root/compat-wireless-3.4-rc1-2/config.mk > include/linux/compat_autoconf.h >> make -C /lib/modules/2.6.32.12-0.7.1/build M=/root/compat-wireless-3.4-rc1-2 modules >> make[1]: Entering directory `/mnt/src/redhat/BUILD/kernel-2.6.32.120.7.1' >> CC [M] /root/compat-wireless-3.4-rc1-2/compat/main.o >> CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat-2.6.33.o >> CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat-2.6.35.o >> CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat-2.6.36.o >> CC [M] /root/compat-wireless-3.4-rc1-2/compat/kfifo.o >> CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat-2.6.37.o >> CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat-2.6.38.o >> CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat-2.6.39.o >> CC [M] /root/compat-wireless-3.4-rc1-2/compat/kstrtox.o >> CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat-3.0.o >> CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat-3.2.o >> CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat-3.3.o >> CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat-3.5.o >> CC [M] /root/compat-wireless-3.4-rc1-2/compat/cordic.o >> CC [M] /root/compat-wireless-3.4-rc1-2/compat/crc8.o >> CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat_atomic.o >> LD [M] /root/compat-wireless-3.4-rc1-2/compat/compat.o >> CC [M] /root/compat-wireless-3.4-rc1-2/compat/compat_firmware_class.o >> CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-agn.o >> CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-agn-rs.o >> CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-mac80211.o >> /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-mac80211.c: In function »iwlagn_mac_resume«: >> /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-mac80211.c:440: Warnung: Variable »img« wird nicht verwendet >> CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-ucode.o >> CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-agn-tx.o >> CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-debug.o >> CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-agn-lib.o >> CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-agn-calib.o >> CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-io.o >> CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-agn-tt.o >> CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-agn-sta.o >> CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-agn-rx.o >> CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-core.o >> CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-eeprom.o >> CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-power.o >> CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-scan.o >> CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-led.o >> CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-agn-rxon.o >> CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-5000.o >> CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-6000.o >> CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-1000.o >> CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-2000.o >> CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-pci.o >> CC [M] /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-drv.o >> /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-drv.c: In function »iwl_request_firmware«: >> /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-drv.c:183: Fehler: »struct iwl_drv« hat kein Element namens »dev« >> /root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-drv.c:183: Fehler: »struct iwl_drv« hat kein Element namens »dev« >> make[4]: *** [/root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi/iwl-drv.o] Fehler 1 >> make[3]: *** [/root/compat-wireless-3.4-rc1-2/drivers/net/wireless/iwlwifi] Fehler 2 >> make[2]: *** [/root/compat-wireless-3.4-rc1-2/drivers/net/wireless] Fehler 2 >> make[1]: *** [_module_/root/compat-wireless-3.4-rc1-2] Fehler 2 >> make[1]: Leaving directory `/mnt/src/redhat/BUILD/kernel-2.6.32.120.7.1' >> make: *** [modules] Fehler 2 >> >> the geman text means: >> struct iwl_drv has no element with name dev >> > > Yeah I know. I have some souvenirs from the years I was dreaming in my > german classes. > We did a lot of changes in our driver in the last months and our code > bases is probably different. > Can you please tell me where you took your compat from (sorry... I > don't really know...) and I will make a patch based on your code. > > I am not sure this will be before next week though... > >> >> Am 19.04.2012 um 18:19 schrieb Emmanuel Grumbach: >> >>> On Thu, Apr 19, 2012 at 18:08, Dominik Feser >>> <dominik.feser@googlemail.com> wrote: >>>> May it be that the fact that Centos 5 doesnt have hotplug causes the issue? >>>> >>> >>> Don't think so. >>> Can it be a problem in the backport of request_firwamre_no_wait ? >>> Did I see somewhere that you run 2.6.38 ? >>> Can you check again after having applied the patch attached ? >>> >>> from the main dir of compat: >>> patch -p1 < print.patch >>> >>> Thanks >>> >>>> Am 19.04.2012 um 16:20 schrieb Johannes Berg: >>>> >>>>> On 4/19/2012 7:09 AM, Dominik Feser wrote: >>>>>> Finally, here is the output of dmesg after recompiling: >>>>>> >>>>>> iwlwifi 0000:02:00.0: edd19e18 >>>>>> iwlwifi 0000:02:00.0: d55c1e18 >>>>>> iwlwifi 0000:02:00.0: d55c1ddc >>>>>> iwlwifi 0000:02:00.0: PCI INT A disabled >>>>>> Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d >>>>>> Copyright(c) 2003-2012 Intel Corporation >>>>>> iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>>>>> iwlwifi 0000:02:00.0: setting latency timer to 64 >>>>>> iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 >>>>>> iwlwifi 0000:02:00.0: pci_resource_base = f447c000 >>>>>> iwlwifi 0000:02:00.0: HW Revision ID = 0x34 >>>>>> iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X >>>>>> iwlwifi 0000:02:00.0: U iwl_request_firmware d5b37d70 >>>>>> iwlwifi 0000:02:00.0: U iwl_request_firmware e09ebdd4 >>>>>> iwlwifi 0000:02:00.0: ee2afe18 >>>>>> iwlwifi 0000:02:00.0: U iwl_request_firmware ee2afdd4 >>>>>> iwlwifi 0000:02:00.0: cc93fe18 >>>>>> iwlwifi 0000:02:00.0: cc93fddc >>>>> >>>>> Still pretty useless since you get %pV printed as a pointer rather than a message. Does anyone know how to fix that in compat? But the iwl_request_firmware 3 times probably means it failed? >>>>> >>>>> johannes >>>> >>> <print.patch> >> ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-20 6:42 ` Dominik Feser @ 2012-04-22 5:23 ` Emmanuel Grumbach 0 siblings, 0 replies; 48+ messages in thread From: Emmanuel Grumbach @ 2012-04-22 5:23 UTC (permalink / raw) To: Dominik Feser; +Cc: Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy [-- Attachment #1: Type: text/plain, Size: 228 bytes --] > > I downloaded the latest release from here: > http://linuxwireless.org/en/users/Download/stable/ which is > http://www.orbit-lab.org/kernel/compat-wireless-3-stable/v3.4/compat-wireless-3.4-rc3-1.tar.bz2 New patch attached. [-- Attachment #2: print.patch --] [-- Type: text/x-patch, Size: 617 bytes --] diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c index 6f312c7..c45ab85 100644 --- a/drivers/net/wireless/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/iwlwifi/iwl-drv.c @@ -180,7 +180,7 @@ static int iwl_request_firmware(struct iwl_drv *drv, bool first) sprintf(drv->firmware_name, "%s%s%s", name_pre, tag, ".ucode"); - IWL_DEBUG_INFO(drv, "attempting to load firmware %s'%s'\n", + dev_err(drv->shrd->trans->dev, "attempting to load firmware %s'%s'\n", (drv->fw_index == UCODE_EXPERIMENTAL_INDEX) ? "EXPERIMENTAL " : "", drv->firmware_name); ^ permalink raw reply related [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-19 16:19 ` Emmanuel Grumbach 2012-04-19 17:26 ` Dominik Feser @ 2012-04-22 13:00 ` Dominik Feser 2012-04-22 16:53 ` Emmanuel Grumbach 1 sibling, 1 reply; 48+ messages in thread From: Dominik Feser @ 2012-04-22 13:00 UTC (permalink / raw) To: Emmanuel Grumbach Cc: Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy THX a lot! Here is the dmesg output: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d Copyright(c) 2003-2012 Intel Corporation iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlwifi 0000:02:00.0: setting latency timer to 64 iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 iwlwifi 0000:02:00.0: pci_resource_base = f4498000 iwlwifi 0000:02:00.0: HW Revision ID = 0x34 iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X iwlwifi 0000:02:00.0: U iwl_request_firmware eebd9d74 iwlwifi 0000:02:00.0: U iwl_request_firmware c8ee1dd8 iwlwifi 0000:02:00.0: U iwl_request_firmware ed655dd8 iwlwifi 0000:02:00.0: d21d7e18 iwlwifi 0000:02:00.0: U iwl_request_firmware d21d7dd8 iwlwifi 0000:02:00.0: eda37e18 iwlwifi 0000:02:00.0: eda37de0 iwlwifi 0000:02:00.0: U iwl_trans_pcie_rx_free eda37d80 iwlwifi 0000:02:00.0: PCI INT A disabled Am 19.04.2012 um 18:19 schrieb Emmanuel Grumbach: > On Thu, Apr 19, 2012 at 18:08, Dominik Feser > <dominik.feser@googlemail.com> wrote: >> May it be that the fact that Centos 5 doesnt have hotplug causes the issue? >> > > Don't think so. > Can it be a problem in the backport of request_firwamre_no_wait ? > Did I see somewhere that you run 2.6.38 ? > Can you check again after having applied the patch attached ? > > from the main dir of compat: > patch -p1 < print.patch > > Thanks > >> Am 19.04.2012 um 16:20 schrieb Johannes Berg: >> >>> On 4/19/2012 7:09 AM, Dominik Feser wrote: >>>> Finally, here is the output of dmesg after recompiling: >>>> >>>> iwlwifi 0000:02:00.0: edd19e18 >>>> iwlwifi 0000:02:00.0: d55c1e18 >>>> iwlwifi 0000:02:00.0: d55c1ddc >>>> iwlwifi 0000:02:00.0: PCI INT A disabled >>>> Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d >>>> Copyright(c) 2003-2012 Intel Corporation >>>> iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>>> iwlwifi 0000:02:00.0: setting latency timer to 64 >>>> iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 >>>> iwlwifi 0000:02:00.0: pci_resource_base = f447c000 >>>> iwlwifi 0000:02:00.0: HW Revision ID = 0x34 >>>> iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X >>>> iwlwifi 0000:02:00.0: U iwl_request_firmware d5b37d70 >>>> iwlwifi 0000:02:00.0: U iwl_request_firmware e09ebdd4 >>>> iwlwifi 0000:02:00.0: ee2afe18 >>>> iwlwifi 0000:02:00.0: U iwl_request_firmware ee2afdd4 >>>> iwlwifi 0000:02:00.0: cc93fe18 >>>> iwlwifi 0000:02:00.0: cc93fddc >>> >>> Still pretty useless since you get %pV printed as a pointer rather than a message. Does anyone know how to fix that in compat? But the iwl_request_firmware 3 times probably means it failed? >>> >>> johannes >> > <print.patch> ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-22 13:00 ` Dominik Feser @ 2012-04-22 16:53 ` Emmanuel Grumbach 2012-04-23 21:26 ` Dominik Feser 0 siblings, 1 reply; 48+ messages in thread From: Emmanuel Grumbach @ 2012-04-22 16:53 UTC (permalink / raw) To: Dominik Feser Cc: Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy, Luis R. Rodriguez On Sun, Apr 22, 2012 at 16:00, Dominik Feser <dominik.feser@googlemail.com> wrote: > THX a lot! Here is the dmesg output: > > Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d > Copyright(c) 2003-2012 Intel Corporation > iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > iwlwifi 0000:02:00.0: setting latency timer to 64 > iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 > iwlwifi 0000:02:00.0: pci_resource_base = f4498000 > iwlwifi 0000:02:00.0: HW Revision ID = 0x34 > iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X > iwlwifi 0000:02:00.0: U iwl_request_firmware eebd9d74 > iwlwifi 0000:02:00.0: U iwl_request_firmware c8ee1dd8 > iwlwifi 0000:02:00.0: U iwl_request_firmware ed655dd8 > iwlwifi 0000:02:00.0: d21d7e18 > iwlwifi 0000:02:00.0: U iwl_request_firmware d21d7dd8 > iwlwifi 0000:02:00.0: eda37e18 > iwlwifi 0000:02:00.0: eda37de0 > iwlwifi 0000:02:00.0: U iwl_trans_pcie_rx_free eda37d80 > iwlwifi 0000:02:00.0: PCI INT A disabled > > Still useless... Gosh... Does someone know to get real prints here ?? I just use dev_err("WHATEVER %s", "STRING"); > > > Am 19.04.2012 um 18:19 schrieb Emmanuel Grumbach: > >> On Thu, Apr 19, 2012 at 18:08, Dominik Feser >> <dominik.feser@googlemail.com> wrote: >>> May it be that the fact that Centos 5 doesnt have hotplug causes the issue? >>> >> >> Don't think so. >> Can it be a problem in the backport of request_firwamre_no_wait ? >> Did I see somewhere that you run 2.6.38 ? >> Can you check again after having applied the patch attached ? >> >> from the main dir of compat: >> patch -p1 < print.patch >> >> Thanks >> >>> Am 19.04.2012 um 16:20 schrieb Johannes Berg: >>> >>>> On 4/19/2012 7:09 AM, Dominik Feser wrote: >>>>> Finally, here is the output of dmesg after recompiling: >>>>> >>>>> iwlwifi 0000:02:00.0: edd19e18 >>>>> iwlwifi 0000:02:00.0: d55c1e18 >>>>> iwlwifi 0000:02:00.0: d55c1ddc >>>>> iwlwifi 0000:02:00.0: PCI INT A disabled >>>>> Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d >>>>> Copyright(c) 2003-2012 Intel Corporation >>>>> iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>>>> iwlwifi 0000:02:00.0: setting latency timer to 64 >>>>> iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 >>>>> iwlwifi 0000:02:00.0: pci_resource_base = f447c000 >>>>> iwlwifi 0000:02:00.0: HW Revision ID = 0x34 >>>>> iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X >>>>> iwlwifi 0000:02:00.0: U iwl_request_firmware d5b37d70 >>>>> iwlwifi 0000:02:00.0: U iwl_request_firmware e09ebdd4 >>>>> iwlwifi 0000:02:00.0: ee2afe18 >>>>> iwlwifi 0000:02:00.0: U iwl_request_firmware ee2afdd4 >>>>> iwlwifi 0000:02:00.0: cc93fe18 >>>>> iwlwifi 0000:02:00.0: cc93fddc >>>> >>>> Still pretty useless since you get %pV printed as a pointer rather than a message. Does anyone know how to fix that in compat? But the iwl_request_firmware 3 times probably means it failed? >>>> >>>> johannes >>> >> <print.patch> > ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-22 16:53 ` Emmanuel Grumbach @ 2012-04-23 21:26 ` Dominik Feser 2012-04-24 5:28 ` Emmanuel Grumbach 0 siblings, 1 reply; 48+ messages in thread From: Dominik Feser @ 2012-04-23 21:26 UTC (permalink / raw) To: Emmanuel Grumbach, Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy, Luis R. Rodriguez Hmm, no one? Am 22.04.2012 um 18:53 schrieb Emmanuel Grumbach: > On Sun, Apr 22, 2012 at 16:00, Dominik Feser > <dominik.feser@googlemail.com> wrote: >> THX a lot! Here is the dmesg output: >> >> Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d >> Copyright(c) 2003-2012 Intel Corporation >> iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >> iwlwifi 0000:02:00.0: setting latency timer to 64 >> iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 >> iwlwifi 0000:02:00.0: pci_resource_base = f4498000 >> iwlwifi 0000:02:00.0: HW Revision ID = 0x34 >> iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X >> iwlwifi 0000:02:00.0: U iwl_request_firmware eebd9d74 >> iwlwifi 0000:02:00.0: U iwl_request_firmware c8ee1dd8 >> iwlwifi 0000:02:00.0: U iwl_request_firmware ed655dd8 >> iwlwifi 0000:02:00.0: d21d7e18 >> iwlwifi 0000:02:00.0: U iwl_request_firmware d21d7dd8 >> iwlwifi 0000:02:00.0: eda37e18 >> iwlwifi 0000:02:00.0: eda37de0 >> iwlwifi 0000:02:00.0: U iwl_trans_pcie_rx_free eda37d80 >> iwlwifi 0000:02:00.0: PCI INT A disabled >> >> > > Still useless... Gosh... Does someone know to get real prints here ?? > I just use dev_err("WHATEVER %s", "STRING"); > >> >> >> Am 19.04.2012 um 18:19 schrieb Emmanuel Grumbach: >> >>> On Thu, Apr 19, 2012 at 18:08, Dominik Feser >>> <dominik.feser@googlemail.com> wrote: >>>> May it be that the fact that Centos 5 doesnt have hotplug causes the issue? >>>> >>> >>> Don't think so. >>> Can it be a problem in the backport of request_firwamre_no_wait ? >>> Did I see somewhere that you run 2.6.38 ? >>> Can you check again after having applied the patch attached ? >>> >>> from the main dir of compat: >>> patch -p1 < print.patch >>> >>> Thanks >>> >>>> Am 19.04.2012 um 16:20 schrieb Johannes Berg: >>>> >>>>> On 4/19/2012 7:09 AM, Dominik Feser wrote: >>>>>> Finally, here is the output of dmesg after recompiling: >>>>>> >>>>>> iwlwifi 0000:02:00.0: edd19e18 >>>>>> iwlwifi 0000:02:00.0: d55c1e18 >>>>>> iwlwifi 0000:02:00.0: d55c1ddc >>>>>> iwlwifi 0000:02:00.0: PCI INT A disabled >>>>>> Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d >>>>>> Copyright(c) 2003-2012 Intel Corporation >>>>>> iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>>>>> iwlwifi 0000:02:00.0: setting latency timer to 64 >>>>>> iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 >>>>>> iwlwifi 0000:02:00.0: pci_resource_base = f447c000 >>>>>> iwlwifi 0000:02:00.0: HW Revision ID = 0x34 >>>>>> iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X >>>>>> iwlwifi 0000:02:00.0: U iwl_request_firmware d5b37d70 >>>>>> iwlwifi 0000:02:00.0: U iwl_request_firmware e09ebdd4 >>>>>> iwlwifi 0000:02:00.0: ee2afe18 >>>>>> iwlwifi 0000:02:00.0: U iwl_request_firmware ee2afdd4 >>>>>> iwlwifi 0000:02:00.0: cc93fe18 >>>>>> iwlwifi 0000:02:00.0: cc93fddc >>>>> >>>>> Still pretty useless since you get %pV printed as a pointer rather than a message. Does anyone know how to fix that in compat? But the iwl_request_firmware 3 times probably means it failed? >>>>> >>>>> johannes >>>> >>> <print.patch> >> ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-23 21:26 ` Dominik Feser @ 2012-04-24 5:28 ` Emmanuel Grumbach 2012-04-24 11:50 ` Pat Erley 0 siblings, 1 reply; 48+ messages in thread From: Emmanuel Grumbach @ 2012-04-24 5:28 UTC (permalink / raw) To: Dominik Feser Cc: Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy, Luis R. Rodriguez On Tue, Apr 24, 2012 at 00:26, Dominik Feser <dominik.feser@googlemail.com> wrote: > Hmm, no one? > Apparently, Luis ? > Am 22.04.2012 um 18:53 schrieb Emmanuel Grumbach: > >> On Sun, Apr 22, 2012 at 16:00, Dominik Feser >> <dominik.feser@googlemail.com> wrote: >>> THX a lot! Here is the dmesg output: >>> >>> Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d >>> Copyright(c) 2003-2012 Intel Corporation >>> iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>> iwlwifi 0000:02:00.0: setting latency timer to 64 >>> iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 >>> iwlwifi 0000:02:00.0: pci_resource_base = f4498000 >>> iwlwifi 0000:02:00.0: HW Revision ID = 0x34 >>> iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X >>> iwlwifi 0000:02:00.0: U iwl_request_firmware eebd9d74 >>> iwlwifi 0000:02:00.0: U iwl_request_firmware c8ee1dd8 >>> iwlwifi 0000:02:00.0: U iwl_request_firmware ed655dd8 >>> iwlwifi 0000:02:00.0: d21d7e18 >>> iwlwifi 0000:02:00.0: U iwl_request_firmware d21d7dd8 >>> iwlwifi 0000:02:00.0: eda37e18 >>> iwlwifi 0000:02:00.0: eda37de0 >>> iwlwifi 0000:02:00.0: U iwl_trans_pcie_rx_free eda37d80 >>> iwlwifi 0000:02:00.0: PCI INT A disabled >>> >>> >> >> Still useless... Gosh... Does someone know to get real prints here ?? >> I just use dev_err("WHATEVER %s", "STRING"); >> >>> >>> >>> Am 19.04.2012 um 18:19 schrieb Emmanuel Grumbach: >>> >>>> On Thu, Apr 19, 2012 at 18:08, Dominik Feser >>>> <dominik.feser@googlemail.com> wrote: >>>>> May it be that the fact that Centos 5 doesnt have hotplug causes the issue? >>>>> >>>> >>>> Don't think so. >>>> Can it be a problem in the backport of request_firwamre_no_wait ? >>>> Did I see somewhere that you run 2.6.38 ? >>>> Can you check again after having applied the patch attached ? >>>> >>>> from the main dir of compat: >>>> patch -p1 < print.patch >>>> >>>> Thanks >>>> >>>>> Am 19.04.2012 um 16:20 schrieb Johannes Berg: >>>>> >>>>>> On 4/19/2012 7:09 AM, Dominik Feser wrote: >>>>>>> Finally, here is the output of dmesg after recompiling: >>>>>>> >>>>>>> iwlwifi 0000:02:00.0: edd19e18 >>>>>>> iwlwifi 0000:02:00.0: d55c1e18 >>>>>>> iwlwifi 0000:02:00.0: d55c1ddc >>>>>>> iwlwifi 0000:02:00.0: PCI INT A disabled >>>>>>> Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d >>>>>>> Copyright(c) 2003-2012 Intel Corporation >>>>>>> iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>>>>>> iwlwifi 0000:02:00.0: setting latency timer to 64 >>>>>>> iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 >>>>>>> iwlwifi 0000:02:00.0: pci_resource_base = f447c000 >>>>>>> iwlwifi 0000:02:00.0: HW Revision ID = 0x34 >>>>>>> iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X >>>>>>> iwlwifi 0000:02:00.0: U iwl_request_firmware d5b37d70 >>>>>>> iwlwifi 0000:02:00.0: U iwl_request_firmware e09ebdd4 >>>>>>> iwlwifi 0000:02:00.0: ee2afe18 >>>>>>> iwlwifi 0000:02:00.0: U iwl_request_firmware ee2afdd4 >>>>>>> iwlwifi 0000:02:00.0: cc93fe18 >>>>>>> iwlwifi 0000:02:00.0: cc93fddc >>>>>> >>>>>> Still pretty useless since you get %pV printed as a pointer rather than a message. Does anyone know how to fix that in compat? But the iwl_request_firmware 3 times probably means it failed? >>>>>> >>>>>> johannes >>>>> >>>> <print.patch> >>> > ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-24 5:28 ` Emmanuel Grumbach @ 2012-04-24 11:50 ` Pat Erley 2012-04-24 12:07 ` Sedat Dilek 0 siblings, 1 reply; 48+ messages in thread From: Pat Erley @ 2012-04-24 11:50 UTC (permalink / raw) To: Emmanuel Grumbach Cc: Dominik Feser, Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy, Luis R. Rodriguez Try a newer compat-wireless. I saw mention of a patch on this ML that iwlwifi was looking for firmwares that aren't available yet. Specifically, it wants a -6 ucode, where you have -5. I'm not sure if this has been merged upstream yet. On 04/24/2012 01:28 AM, Emmanuel Grumbach wrote: > On Tue, Apr 24, 2012 at 00:26, Dominik Feser > <dominik.feser@googlemail.com> wrote: >> Hmm, no one? >> > > Apparently, Luis ? > >> Am 22.04.2012 um 18:53 schrieb Emmanuel Grumbach: >> >>> On Sun, Apr 22, 2012 at 16:00, Dominik Feser >>> <dominik.feser@googlemail.com> wrote: >>>> THX a lot! Here is the dmesg output: >>>> >>>> Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d >>>> Copyright(c) 2003-2012 Intel Corporation >>>> iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>>> iwlwifi 0000:02:00.0: setting latency timer to 64 >>>> iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 >>>> iwlwifi 0000:02:00.0: pci_resource_base = f4498000 >>>> iwlwifi 0000:02:00.0: HW Revision ID = 0x34 >>>> iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X >>>> iwlwifi 0000:02:00.0: U iwl_request_firmware eebd9d74 >>>> iwlwifi 0000:02:00.0: U iwl_request_firmware c8ee1dd8 >>>> iwlwifi 0000:02:00.0: U iwl_request_firmware ed655dd8 >>>> iwlwifi 0000:02:00.0: d21d7e18 >>>> iwlwifi 0000:02:00.0: U iwl_request_firmware d21d7dd8 >>>> iwlwifi 0000:02:00.0: eda37e18 >>>> iwlwifi 0000:02:00.0: eda37de0 >>>> iwlwifi 0000:02:00.0: U iwl_trans_pcie_rx_free eda37d80 >>>> iwlwifi 0000:02:00.0: PCI INT A disabled >>>> >>>> >>> >>> Still useless... Gosh... Does someone know to get real prints here ?? >>> I just use dev_err("WHATEVER %s", "STRING"); >>> >>>> >>>> >>>> Am 19.04.2012 um 18:19 schrieb Emmanuel Grumbach: >>>> >>>>> On Thu, Apr 19, 2012 at 18:08, Dominik Feser >>>>> <dominik.feser@googlemail.com> wrote: >>>>>> May it be that the fact that Centos 5 doesnt have hotplug causes the issue? >>>>>> >>>>> >>>>> Don't think so. >>>>> Can it be a problem in the backport of request_firwamre_no_wait ? >>>>> Did I see somewhere that you run 2.6.38 ? >>>>> Can you check again after having applied the patch attached ? >>>>> >>>>> from the main dir of compat: >>>>> patch -p1< print.patch >>>>> >>>>> Thanks >>>>> >>>>>> Am 19.04.2012 um 16:20 schrieb Johannes Berg: >>>>>> >>>>>>> On 4/19/2012 7:09 AM, Dominik Feser wrote: >>>>>>>> Finally, here is the output of dmesg after recompiling: >>>>>>>> >>>>>>>> iwlwifi 0000:02:00.0: edd19e18 >>>>>>>> iwlwifi 0000:02:00.0: d55c1e18 >>>>>>>> iwlwifi 0000:02:00.0: d55c1ddc >>>>>>>> iwlwifi 0000:02:00.0: PCI INT A disabled >>>>>>>> Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d >>>>>>>> Copyright(c) 2003-2012 Intel Corporation >>>>>>>> iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>>>>>>> iwlwifi 0000:02:00.0: setting latency timer to 64 >>>>>>>> iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 >>>>>>>> iwlwifi 0000:02:00.0: pci_resource_base = f447c000 >>>>>>>> iwlwifi 0000:02:00.0: HW Revision ID = 0x34 >>>>>>>> iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X >>>>>>>> iwlwifi 0000:02:00.0: U iwl_request_firmware d5b37d70 >>>>>>>> iwlwifi 0000:02:00.0: U iwl_request_firmware e09ebdd4 >>>>>>>> iwlwifi 0000:02:00.0: ee2afe18 >>>>>>>> iwlwifi 0000:02:00.0: U iwl_request_firmware ee2afdd4 >>>>>>>> iwlwifi 0000:02:00.0: cc93fe18 >>>>>>>> iwlwifi 0000:02:00.0: cc93fddc >>>>>>> >>>>>>> Still pretty useless since you get %pV printed as a pointer rather than a message. Does anyone know how to fix that in compat? But the iwl_request_firmware 3 times probably means it failed? >>>>>>> >>>>>>> johannes >>>>>> >>>>> <print.patch> >>>> >> > -- > To unsubscribe from this list: send the line "unsubscribe linux-wireless" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-24 11:50 ` Pat Erley @ 2012-04-24 12:07 ` Sedat Dilek 2012-04-24 12:29 ` Dominik Feser 0 siblings, 1 reply; 48+ messages in thread From: Sedat Dilek @ 2012-04-24 12:07 UTC (permalink / raw) To: Pat Erley Cc: Emmanuel Grumbach, Dominik Feser, Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy, Luis R. Rodriguez On Tue, Apr 24, 2012 at 1:50 PM, Pat Erley <pat-lkml@erley.org> wrote: > Try a newer compat-wireless. I saw mention of a patch on this ML > that iwlwifi was looking for firmwares that aren't available yet. > > Specifically, it wants a -6 ucode, where you have -5. I'm not > sure if this has been merged upstream yet. > No, pending for upstream and linux-stable GIT, see [1] and especially "iwlwifi: use correct released ucode version" [2]. - Sedat - [1] http://git.kernel.org/?p=linux/kernel/git/iwlwifi/iwlwifi.git;a=shortlog;h=refs/heads/wireless [2] http://git.kernel.org/?p=linux/kernel/git/iwlwifi/iwlwifi.git;a=patch;h=462156fac4d69483c1d54c6218d019681da8ad74 ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-24 12:07 ` Sedat Dilek @ 2012-04-24 12:29 ` Dominik Feser 2012-04-24 12:45 ` Sedat Dilek 0 siblings, 1 reply; 48+ messages in thread From: Dominik Feser @ 2012-04-24 12:29 UTC (permalink / raw) To: sedat.dilek Cc: Pat Erley, Emmanuel Grumbach, Dominik Feser, Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy, Luis R. Rodriguez What does that mean? Am 24.04.2012 um 14:07 schrieb Sedat Dilek: > On Tue, Apr 24, 2012 at 1:50 PM, Pat Erley <pat-lkml@erley.org> wrote: >> Try a newer compat-wireless. I saw mention of a patch on this ML >> that iwlwifi was looking for firmwares that aren't available yet. >> >> Specifically, it wants a -6 ucode, where you have -5. I'm not >> sure if this has been merged upstream yet. >> > > No, pending for upstream and linux-stable GIT, see [1] and especially > "iwlwifi: use correct released ucode version" [2]. > > - Sedat - > > [1] http://git.kernel.org/?p=linux/kernel/git/iwlwifi/iwlwifi.git;a=shortlog;h=refs/heads/wireless > [2] http://git.kernel.org/?p=linux/kernel/git/iwlwifi/iwlwifi.git;a=patch;h=462156fac4d69483c1d54c6218d019681da8ad74 ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-24 12:29 ` Dominik Feser @ 2012-04-24 12:45 ` Sedat Dilek 2012-04-24 15:34 ` Emmanuel Grumbach 0 siblings, 1 reply; 48+ messages in thread From: Sedat Dilek @ 2012-04-24 12:45 UTC (permalink / raw) To: Dominik Feser Cc: Pat Erley, Emmanuel Grumbach, Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy, Luis R. Rodriguez On Tue, Apr 24, 2012 at 2:29 PM, Dominik Feser <dominik.feser@googlemail.com> wrote: > What does that mean? > Pickup the patch from [2], apply it against a recent compat-wireless version, build and test. Report here again. - Sedat - > > Am 24.04.2012 um 14:07 schrieb Sedat Dilek: > >> On Tue, Apr 24, 2012 at 1:50 PM, Pat Erley <pat-lkml@erley.org> wrote: >>> Try a newer compat-wireless. I saw mention of a patch on this ML >>> that iwlwifi was looking for firmwares that aren't available yet. >>> >>> Specifically, it wants a -6 ucode, where you have -5. I'm not >>> sure if this has been merged upstream yet. >>> >> >> No, pending for upstream and linux-stable GIT, see [1] and especially >> "iwlwifi: use correct released ucode version" [2]. >> >> - Sedat - >> >> [1] http://git.kernel.org/?p=linux/kernel/git/iwlwifi/iwlwifi.git;a=shortlog;h=refs/heads/wireless >> [2] http://git.kernel.org/?p=linux/kernel/git/iwlwifi/iwlwifi.git;a=patch;h=462156fac4d69483c1d54c6218d019681da8ad74 > ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-24 12:45 ` Sedat Dilek @ 2012-04-24 15:34 ` Emmanuel Grumbach 2012-04-25 6:23 ` Sedat Dilek 0 siblings, 1 reply; 48+ messages in thread From: Emmanuel Grumbach @ 2012-04-24 15:34 UTC (permalink / raw) To: sedat.dilek Cc: Dominik Feser, Pat Erley, Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy, Luis R. Rodriguez On Tue, Apr 24, 2012 at 15:45, Sedat Dilek <sedat.dilek@googlemail.com> wrote: > On Tue, Apr 24, 2012 at 2:29 PM, Dominik Feser > <dominik.feser@googlemail.com> wrote: >> What does that mean? >> > > Pickup the patch from [2], apply it against a recent compat-wireless > version, build and test. > Report here again. > Pretty sure it won't help. True, we were trying to request the wrong fw, but then we requested (and got) the good one, so that the only effect was that load time was longer that it could be. But here, we can't even get anything working. And the prints don't made it to kernel log properly > - Sedat - > >> >> Am 24.04.2012 um 14:07 schrieb Sedat Dilek: >> >>> On Tue, Apr 24, 2012 at 1:50 PM, Pat Erley <pat-lkml@erley.org> wrote: >>>> Try a newer compat-wireless. I saw mention of a patch on this ML >>>> that iwlwifi was looking for firmwares that aren't available yet. >>>> >>>> Specifically, it wants a -6 ucode, where you have -5. I'm not >>>> sure if this has been merged upstream yet. >>>> >>> >>> No, pending for upstream and linux-stable GIT, see [1] and especially >>> "iwlwifi: use correct released ucode version" [2]. >>> >>> - Sedat - >>> >>> [1] http://git.kernel.org/?p=linux/kernel/git/iwlwifi/iwlwifi.git;a=shortlog;h=refs/heads/wireless >>> [2] http://git.kernel.org/?p=linux/kernel/git/iwlwifi/iwlwifi.git;a=patch;h=462156fac4d69483c1d54c6218d019681da8ad74 >> ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-24 15:34 ` Emmanuel Grumbach @ 2012-04-25 6:23 ` Sedat Dilek 2012-04-25 7:26 ` Emmanuel Grumbach 0 siblings, 1 reply; 48+ messages in thread From: Sedat Dilek @ 2012-04-25 6:23 UTC (permalink / raw) To: Emmanuel Grumbach Cc: Dominik Feser, Pat Erley, Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy, Luis R. Rodriguez On Tue, Apr 24, 2012 at 5:34 PM, Emmanuel Grumbach <egrumbach@gmail.com> wrote: > On Tue, Apr 24, 2012 at 15:45, Sedat Dilek <sedat.dilek@googlemail.com> wrote: >> On Tue, Apr 24, 2012 at 2:29 PM, Dominik Feser >> <dominik.feser@googlemail.com> wrote: >>> What does that mean? >>> >> >> Pickup the patch from [2], apply it against a recent compat-wireless >> version, build and test. >> Report here again. >> > > Pretty sure it won't help. True, we were trying to request the wrong > fw, but then we requested (and got) the good one, so that the only > effect was that load time was longer that it could be. But here, we > can't even get anything working. And the prints don't made it to > kernel log properly > Originally I answered Pat as he asked what's the status with the patch concerning the firmware-issue. So, my post was about applying this one (so I understood the open question). I didn't care about the original concern of the reporter. BTW, the mentioned patch is now in wireless.git (master-2012-04-24-2). Currently, I have an issue myself on iwlwifi (6230) with Ubuntu precise, but it looks like a bug in network-manager with 3.4-rc4+ (see [1]). - Sedat - [1] https://bugzilla.redhat.com/show_bug.cgi?id=785772 >> - Sedat - >> >>> >>> Am 24.04.2012 um 14:07 schrieb Sedat Dilek: >>> >>>> On Tue, Apr 24, 2012 at 1:50 PM, Pat Erley <pat-lkml@erley.org> wrote: >>>>> Try a newer compat-wireless. I saw mention of a patch on this ML >>>>> that iwlwifi was looking for firmwares that aren't available yet. >>>>> >>>>> Specifically, it wants a -6 ucode, where you have -5. I'm not >>>>> sure if this has been merged upstream yet. >>>>> >>>> >>>> No, pending for upstream and linux-stable GIT, see [1] and especially >>>> "iwlwifi: use correct released ucode version" [2]. >>>> >>>> - Sedat - >>>> >>>> [1] http://git.kernel.org/?p=linux/kernel/git/iwlwifi/iwlwifi.git;a=shortlog;h=refs/heads/wireless >>>> [2] http://git.kernel.org/?p=linux/kernel/git/iwlwifi/iwlwifi.git;a=patch;h=462156fac4d69483c1d54c6218d019681da8ad74 >>> ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-25 6:23 ` Sedat Dilek @ 2012-04-25 7:26 ` Emmanuel Grumbach 2012-04-25 7:32 ` Emmanuel Grumbach 2012-04-25 7:34 ` Sedat Dilek 0 siblings, 2 replies; 48+ messages in thread From: Emmanuel Grumbach @ 2012-04-25 7:26 UTC (permalink / raw) To: sedat.dilek Cc: Dominik Feser, Pat Erley, Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy, Luis R. Rodriguez On Wed, Apr 25, 2012 at 09:23, Sedat Dilek <sedat.dilek@googlemail.com> wrote: > On Tue, Apr 24, 2012 at 5:34 PM, Emmanuel Grumbach <egrumbach@gmail.com> wrote: >> On Tue, Apr 24, 2012 at 15:45, Sedat Dilek <sedat.dilek@googlemail.com> wrote: >>> On Tue, Apr 24, 2012 at 2:29 PM, Dominik Feser >>> <dominik.feser@googlemail.com> wrote: >>>> What does that mean? >>>> >>> >>> Pickup the patch from [2], apply it against a recent compat-wireless >>> version, build and test. >>> Report here again. >>> >> >> Pretty sure it won't help. True, we were trying to request the wrong >> fw, but then we requested (and got) the good one, so that the only >> effect was that load time was longer that it could be. But here, we >> can't even get anything working. And the prints don't made it to >> kernel log properly >> > > Originally I answered Pat as he asked what's the status with the patch > concerning the firmware-issue. > So, my post was about applying this one (so I understood the open question). > I didn't care about the original concern of the reporter. > BTW, the mentioned patch is now in wireless.git (master-2012-04-24-2). fair enough :-) > > Currently, I have an issue myself on iwlwifi (6230) with Ubuntu > precise, but it looks like a bug in network-manager with 3.4-rc4+ (see > [1]). > > - Sedat - > > [1] https://bugzilla.redhat.com/show_bug.cgi?id=785772 > Thanks for that pointer. ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-25 7:26 ` Emmanuel Grumbach @ 2012-04-25 7:32 ` Emmanuel Grumbach 2012-04-25 7:34 ` Sedat Dilek 1 sibling, 0 replies; 48+ messages in thread From: Emmanuel Grumbach @ 2012-04-25 7:32 UTC (permalink / raw) To: Dominik Feser Cc: Pat Erley, Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy, Luis R. Rodriguez [-- Attachment #1: Type: text/plain, Size: 1635 bytes --] Out of curisosity Dominik, can you please try the patch attached ? thanks Emmanuel Grumbach egrumbach@gmail.com On Wed, Apr 25, 2012 at 10:26, Emmanuel Grumbach <egrumbach@gmail.com> wrote: > On Wed, Apr 25, 2012 at 09:23, Sedat Dilek <sedat.dilek@googlemail.com> wrote: >> On Tue, Apr 24, 2012 at 5:34 PM, Emmanuel Grumbach <egrumbach@gmail.com> wrote: >>> On Tue, Apr 24, 2012 at 15:45, Sedat Dilek <sedat.dilek@googlemail.com> wrote: >>>> On Tue, Apr 24, 2012 at 2:29 PM, Dominik Feser >>>> <dominik.feser@googlemail.com> wrote: >>>>> What does that mean? >>>>> >>>> >>>> Pickup the patch from [2], apply it against a recent compat-wireless >>>> version, build and test. >>>> Report here again. >>>> >>> >>> Pretty sure it won't help. True, we were trying to request the wrong >>> fw, but then we requested (and got) the good one, so that the only >>> effect was that load time was longer that it could be. But here, we >>> can't even get anything working. And the prints don't made it to >>> kernel log properly >>> >> >> Originally I answered Pat as he asked what's the status with the patch >> concerning the firmware-issue. >> So, my post was about applying this one (so I understood the open question). >> I didn't care about the original concern of the reporter. >> BTW, the mentioned patch is now in wireless.git (master-2012-04-24-2). > > fair enough :-) > >> >> Currently, I have an issue myself on iwlwifi (6230) with Ubuntu >> precise, but it looks like a bug in network-manager with 3.4-rc4+ (see >> [1]). >> >> - Sedat - >> >> [1] https://bugzilla.redhat.com/show_bug.cgi?id=785772 >> > > Thanks for that pointer. [-- Attachment #2: ucode.patch --] [-- Type: text/x-patch, Size: 637 bytes --] diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index 64060cd..f5d0b5a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -334,7 +334,7 @@ static const struct iwl_bt_params iwl6000_bt_params = { #define IWL_DEVICE_6005 \ .fw_name_pre = IWL6005_FW_PRE, \ .ucode_api_max = IWL6000G2_UCODE_API_MAX, \ - .ucode_api_ok = IWL6000G2_UCODE_API_OK, \ + .ucode_api_ok = IWL6000G2B_UCODE_API_OK, \ .ucode_api_min = IWL6000G2_UCODE_API_MIN, \ .max_inst_size = IWL60_RTC_INST_SIZE, \ .max_data_size = IWL60_RTC_DATA_SIZE, \ ^ permalink raw reply related [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-25 7:26 ` Emmanuel Grumbach 2012-04-25 7:32 ` Emmanuel Grumbach @ 2012-04-25 7:34 ` Sedat Dilek 2012-04-25 10:44 ` Sedat Dilek 1 sibling, 1 reply; 48+ messages in thread From: Sedat Dilek @ 2012-04-25 7:34 UTC (permalink / raw) To: Emmanuel Grumbach Cc: Dominik Feser, Pat Erley, Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy, Luis R. Rodriguez On Wed, Apr 25, 2012 at 9:26 AM, Emmanuel Grumbach <egrumbach@gmail.com> wrote: > On Wed, Apr 25, 2012 at 09:23, Sedat Dilek <sedat.dilek@googlemail.com> wrote: >> On Tue, Apr 24, 2012 at 5:34 PM, Emmanuel Grumbach <egrumbach@gmail.com> wrote: >>> On Tue, Apr 24, 2012 at 15:45, Sedat Dilek <sedat.dilek@googlemail.com> wrote: >>>> On Tue, Apr 24, 2012 at 2:29 PM, Dominik Feser >>>> <dominik.feser@googlemail.com> wrote: >>>>> What does that mean? >>>>> >>>> >>>> Pickup the patch from [2], apply it against a recent compat-wireless >>>> version, build and test. >>>> Report here again. >>>> >>> >>> Pretty sure it won't help. True, we were trying to request the wrong >>> fw, but then we requested (and got) the good one, so that the only >>> effect was that load time was longer that it could be. But here, we >>> can't even get anything working. And the prints don't made it to >>> kernel log properly >>> >> >> Originally I answered Pat as he asked what's the status with the patch >> concerning the firmware-issue. >> So, my post was about applying this one (so I understood the open question). >> I didn't care about the original concern of the reporter. >> BTW, the mentioned patch is now in wireless.git (master-2012-04-24-2). > > fair enough :-) > >> >> Currently, I have an issue myself on iwlwifi (6230) with Ubuntu >> precise, but it looks like a bug in network-manager with 3.4-rc4+ (see >> [1]). >> >> - Sedat - >> >> [1] https://bugzilla.redhat.com/show_bug.cgi?id=785772 >> > > Thanks for that pointer. My first bug-report to Ubuntu BTS. Don't want to tell you how much effort this was, not the bug-report itself. It started with... $ sudo ubuntu-bug $(pidof NetworkManager) ...on Debian I was used to file with report-bug. That was not enough, I had to register a LaunchPad-account and got a strange "DisplayName" and "OpenIdName". After some struggling I got both changed. There are really easier ways... - Sedat - [1] https://bugs.launchpad.net/bugs/988183 ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-25 7:34 ` Sedat Dilek @ 2012-04-25 10:44 ` Sedat Dilek 2012-05-02 5:08 ` Emmanuel Grumbach 0 siblings, 1 reply; 48+ messages in thread From: Sedat Dilek @ 2012-04-25 10:44 UTC (permalink / raw) To: Emmanuel Grumbach Cc: Dominik Feser, Pat Erley, Johannes Berg, Arend van Spriel, linux-wireless, Wey-Yi Guy, Luis R. Rodriguez On Wed, Apr 25, 2012 at 9:34 AM, Sedat Dilek <sedat.dilek@googlemail.com> wrote: > On Wed, Apr 25, 2012 at 9:26 AM, Emmanuel Grumbach <egrumbach@gmail.com> wrote: >> On Wed, Apr 25, 2012 at 09:23, Sedat Dilek <sedat.dilek@googlemail.com> wrote: >>> On Tue, Apr 24, 2012 at 5:34 PM, Emmanuel Grumbach <egrumbach@gmail.com> wrote: >>>> On Tue, Apr 24, 2012 at 15:45, Sedat Dilek <sedat.dilek@googlemail.com> wrote: >>>>> On Tue, Apr 24, 2012 at 2:29 PM, Dominik Feser >>>>> <dominik.feser@googlemail.com> wrote: >>>>>> What does that mean? >>>>>> >>>>> >>>>> Pickup the patch from [2], apply it against a recent compat-wireless >>>>> version, build and test. >>>>> Report here again. >>>>> >>>> >>>> Pretty sure it won't help. True, we were trying to request the wrong >>>> fw, but then we requested (and got) the good one, so that the only >>>> effect was that load time was longer that it could be. But here, we >>>> can't even get anything working. And the prints don't made it to >>>> kernel log properly >>>> >>> >>> Originally I answered Pat as he asked what's the status with the patch >>> concerning the firmware-issue. >>> So, my post was about applying this one (so I understood the open question). >>> I didn't care about the original concern of the reporter. >>> BTW, the mentioned patch is now in wireless.git (master-2012-04-24-2). >> >> fair enough :-) >> >>> >>> Currently, I have an issue myself on iwlwifi (6230) with Ubuntu >>> precise, but it looks like a bug in network-manager with 3.4-rc4+ (see >>> [1]). >>> >>> - Sedat - >>> >>> [1] https://bugzilla.redhat.com/show_bug.cgi?id=785772 >>> >> >> Thanks for that pointer. > > My first bug-report to Ubuntu BTS. > > Don't want to tell you how much effort this was, not the bug-report itself. > It started with... > > $ sudo ubuntu-bug $(pidof NetworkManager) > > ...on Debian I was used to file with report-bug. > > That was not enough, I had to register a LaunchPad-account and got a > strange "DisplayName" and "OpenIdName". > After some struggling I got both changed. > There are really easier ways... > > - Sedat - > > [1] https://bugs.launchpad.net/bugs/988183 Just FYI: I found the NM upstream commit which fixes Ubuntu's NetworkManager version in precise release (debdiff attached to my BR). The issue reminds me of many drakes (male) court a single duck's (female) favour in the pairing season, sort of a witch-hunt, not gentleman-alike. - Sedat - ^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: wlan0 not present 2012-04-25 10:44 ` Sedat Dilek @ 2012-05-02 5:08 ` Emmanuel Grumbach 0 siblings, 0 replies; 48+ messages in thread From: Emmanuel Grumbach @ 2012-05-02 5:08 UTC (permalink / raw) To: sedat.dilek; +Cc: Dominik Feser, Johannes Berg, linux-wireless, Wey-Yi Guy This thread has shifted from its original purpose. Just to be sure Dominik, I guess you still have issues and still can't really the debug messages right ? Emmanuel Grumbach egrumbach@gmail.com ^ permalink raw reply [flat|nested] 48+ messages in thread
end of thread, other threads:[~2012-05-02 5:08 UTC | newest] Thread overview: 48+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2012-04-17 17:59 wlan0 not present Dominik Feser 2012-04-17 19:19 ` Arend van Spriel 2012-04-17 21:41 ` Dominik Feser 2012-04-18 0:37 ` Johannes Berg 2012-04-18 6:49 ` Dominik Feser 2012-04-18 8:36 ` Emmanuel Grumbach 2012-04-18 8:48 ` Dominik Feser 2012-04-18 9:30 ` Emmanuel Grumbach 2012-04-18 14:39 ` Dominik Feser 2012-04-18 16:37 ` Emmanuel Grumbach 2012-04-18 16:56 ` Dominik Feser 2012-04-18 19:25 ` Emmanuel Grumbach 2012-04-18 19:28 ` Dominik Feser 2012-04-18 19:33 ` Emmanuel Grumbach 2012-04-18 21:17 ` Dominik Feser 2012-04-19 5:03 ` Emmanuel Grumbach 2012-04-19 7:25 ` Dominik Feser 2012-04-19 7:45 ` Emmanuel Grumbach 2012-04-19 7:49 ` Dominik Feser 2012-04-19 7:54 ` Emmanuel Grumbach 2012-04-19 7:55 ` Emmanuel Grumbach 2012-04-19 10:08 ` Dominik Feser 2012-04-19 13:16 ` Emmanuel Grumbach 2012-04-19 13:20 ` Dominik Feser 2012-04-19 13:24 ` Johannes Berg 2012-04-19 14:09 ` Dominik Feser 2012-04-19 14:20 ` Johannes Berg 2012-04-19 15:08 ` Dominik Feser 2012-04-19 16:19 ` Emmanuel Grumbach 2012-04-19 17:26 ` Dominik Feser 2012-04-19 18:04 ` Emmanuel Grumbach 2012-04-20 6:42 ` Dominik Feser 2012-04-22 5:23 ` Emmanuel Grumbach 2012-04-22 13:00 ` Dominik Feser 2012-04-22 16:53 ` Emmanuel Grumbach 2012-04-23 21:26 ` Dominik Feser 2012-04-24 5:28 ` Emmanuel Grumbach 2012-04-24 11:50 ` Pat Erley 2012-04-24 12:07 ` Sedat Dilek 2012-04-24 12:29 ` Dominik Feser 2012-04-24 12:45 ` Sedat Dilek 2012-04-24 15:34 ` Emmanuel Grumbach 2012-04-25 6:23 ` Sedat Dilek 2012-04-25 7:26 ` Emmanuel Grumbach 2012-04-25 7:32 ` Emmanuel Grumbach 2012-04-25 7:34 ` Sedat Dilek 2012-04-25 10:44 ` Sedat Dilek 2012-05-02 5:08 ` Emmanuel Grumbach
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.