Re: 2.7.0 not support enable-event -k -a

Re: 2.7.0 not support enable-event -k -a

[Jonathan Rajotte Julien]

Hi Zhenyu,

I just tested it on a Ubuntu 15.10 with kernel 4.2.3 with no problem.

Did you install from source/ppa ? Could you give us all the steps involved ?

Make sure to go over [1] to help us pinpoint the problem.

[1] https://lttng.org/community/#bug-reporting-guidelines

Cheers!

On 2015-11-10 03:17 AM, zhenyu.ren wrote:
> Hi,dev-team
>
>    I got the following erros when I run the commd 
> :lttng enable-event -k -a
> "Error: Events: Enable kernel event failed (channel channel0, session kernel_test)
> Error: Command error"
>   It seems that LTTNG-2.7.0 do NOT support enable-event option 
> "--all". Is that right?If wo ,what's the idea behind it?
>
> Thanks
> zhenyu.ren
>
>
>
> _______________________________________________
> lttng-dev mailing list
> lttng-dev@lists.lttng.org
> http://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev

-- 
Jonathan R. Julien
Efficios

Re: 2.7.0 not support enable-event -k -a

[Jérémie Galarneau]

On Tue, Nov 10, 2015 at 10:02 AM, Jonathan Rajotte Julien
<Jonathan.rajotte-julien@efficios.com> wrote:
> Hi Zhenyu,
>
> I just tested it on a Ubuntu 15.10 with kernel 4.2.3 with no problem.
>
> Did you install from source/ppa ? Could you give us all the steps involved ?
>
> Make sure to go over [1] to help us pinpoint the problem.
>
> [1] https://lttng.org/community/#bug-reporting-guidelines

Make sure you include the verbose logs of the session daemon by
launching it with the '-vvv' switch.
Also, please check that your lttng-modules version matches the rest of
the toolchain (v2.7.x)

Thanks!
Jérémie

>
> Cheers!
>
>
> On 2015-11-10 03:17 AM, zhenyu.ren wrote:
>>
>> Hi,dev-team
>>
>>    I got the following erros when I run the commd :lttng enable-event -k
>> -a
>> "Error: Events: Enable kernel event failed (channel channel0, session
>> kernel_test)
>> Error: Command error"
>>   It seems that LTTNG-2.7.0 do NOT support enable-event option "--all". Is
>> that right?If wo ,what's the idea behind it?
>>
>> Thanks
>> zhenyu.ren
>>
>>
>>
>> _______________________________________________
>> lttng-dev mailing list
>> lttng-dev@lists.lttng.org
>> http://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev
>
>
> --
> Jonathan R. Julien
> Efficios
>
>
> _______________________________________________
> lttng-dev mailing list
> lttng-dev@lists.lttng.org
> http://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev



-- 
Jérémie Galarneau
EfficiOS Inc.
http://www.efficios.com

_______________________________________________
lttng-dev mailing list
lttng-dev@lists.lttng.org
http://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev

答复： 2.7.0 not support enable-event -k -a

[zhenyu.ren]

[-- Attachment #1.1: Type: text/plain, Size: 2320 bytes --]

  In fact, I made some changes in lttng toolchain(module/tool/ust) to support older kernel/OS.These changes are OK for Lttng 2.6 .Since you are sure "enable-event -k -a" has no problem,it's more chance that I made some inappropriate changes.

Thankszhenyu.ren------------------------------------------------------------------发件人：Jérémie Galarneau <jeremie.galarneau@efficios.com>发送时间：2015年11月10日(星期二) 23:09收件人：zhenyu.ren <zhenyu.ren@aliyun.com>抄　送：lttng-dev <lttng-dev@lists.lttng.org>，Jonathan Rajotte Julien <Jonathan.rajotte-julien@efficios.com>主　题：Re: [lttng-dev] 2.7.0 not support enable-event -k -a
On Tue, Nov 10, 2015 at 10:02 AM, Jonathan Rajotte Julien
<Jonathan.rajotte-julien@efficios.com> wrote:
> Hi Zhenyu,
>
> I just tested it on a Ubuntu 15.10 with kernel 4.2.3 with no problem.
>
> Did you install from source/ppa ? Could you give us all the steps involved ?
>
> Make sure to go over [1] to help us pinpoint the problem.
>
> [1] https://lttng.org/community/#bug-reporting-guidelines

Make sure you include the verbose logs of the session daemon by
launching it with the '-vvv' switch.
Also, please check that your lttng-modules version matches the rest of
the toolchain (v2.7.x)

Thanks!
Jérémie

>
> Cheers!
>
>
> On 2015-11-10 03:17 AM, zhenyu.ren wrote:
>>
>> Hi,dev-team
>>
>>    I got the following erros when I run the commd :lttng enable-event -k
>> -a
>> "Error: Events: Enable kernel event failed (channel channel0, session
>> kernel_test)
>> Error: Command error"
>>   It seems that LTTNG-2.7.0 do NOT support enable-event option "--all". Is
>> that right?If wo ,what's the idea behind it?
>>
>> Thanks
>> zhenyu.ren
>>
>>
>>
>> _______________________________________________
>> lttng-dev mailing list
>> lttng-dev@lists.lttng.org
>> http://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev
>
>
> --
> Jonathan R. Julien
> Efficios
>
>
> _______________________________________________
> lttng-dev mailing list
> lttng-dev@lists.lttng.org
> http://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev



-- 
Jérémie Galarneau
EfficiOS Inc.
http://www.efficios.com

[-- Attachment #1.2: Type: text/html, Size: 5184 bytes --]

[-- Attachment #2: Type: text/plain, Size: 155 bytes --]

_______________________________________________
lttng-dev mailing list
lttng-dev@lists.lttng.org
http://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev

答复： 答复： 2.7.0 not support enable-event -k -a

[zhenyu.ren]

[-- Attachment #1.1: Type: text/plain, Size: 6874 bytes --]

Sorry，forget to post the verbose logs of lttng-sessiond.
DEBUG3 - 10:05:34.476087 [15262/15262]: Looking for a kernel consumer at these locations: (in spawn_consumerd() at main.c:2516)
DEBUG3 - 10:05:34.476595 [15262/15262]:         1) /usr/local/lib/lttng/libexec/lttng-consumerd (in spawn_consumerd() at main.c:2517)
DEBUG3 - 10:05:34.476682 [15262/15262]:         2) /usr/local/lib/lttng/libexec/lttng-consumerd (in spawn_consumerd() at main.c:2518)
DEBUG1 - 10:05:34.476462 [14540/15263]: [thread] Manage consumer started (in thread_manage_consumer() at main.c:1249)
DEBUG3 - 10:05:34.476765 [15262/15262]:         3)  (in spawn_consumerd() at main.c:2519)
DEBUG3 - 10:05:34.477658 [15262/15262]: Found location #1 (in spawn_consumerd() at main.c:2521)
DEBUG1 - 10:05:34.477742 [15262/15262]: Using kernel consumer at: /usr/local/lib/lttng/libexec/lttng-consumerd (in spawn_consumerd() at main.c:2534)
DEBUG2 - 10:05:34.275827 [14540/15263]: Receiving code from consumer err_sock (in thread_manage_consumer() at main.c:1347)
DEBUG1 - 10:05:34.376523 [14540/15263]: Consumer command socket ready (fd: 37 (in thread_manage_consumer() at main.c:1381)
DEBUG1 - 10:05:34.376554 [14540/15263]: Consumer metadata socket ready (fd: 38) (in thread_manage_consumer() at main.c:1383)
DEBUG3 - 10:05:34.376545 [14540/14601]: Consumer socket created (fd: 37) and added to output (in consumer_create_socket() at consumer.c:302)
DEBUG1 - 10:05:34.376585 [14540/14601]: Setting relayd for session kernel_test (in cmd_setup_relayd() at cmd.c:761)
DEBUG1 - 10:05:34.376599 [14540/14601]: Enable event command for event '*' (in _cmd_enable_event() at cmd.c:1524)
DEBUG1 - 10:05:34.376619 [14540/14601]: Trying to find channel channel0 (in trace_kernel_get_channel_by_name() at trace-kernel.c:49)
DEBUG1 - 10:05:34.376652 [14540/14601]: Enabling channel  for session kernel_test (in cmd_enable_channel() at cmd.c:1054)
DEBUG1 - 10:05:34.376662 [14540/14601]: Trying to find channel channel0 (in trace_kernel_get_channel_by_name() at trace-kernel.c:49)
DEBUG3 - 10:05:34.376679 [14540/14601]: Kernel create channel  with attr: 0, 262144, 4, 0, 200000, 0, 0 (in kernel_create_channel() at kernel.c:140)
DEBUG1 - 10:05:35.744393 [14540/14601]: Kernel channel channel0 created (fd: 39) (in kernel_create_channel() at kernel.c:162)
DEBUG1 - 10:05:35.744972 [14540/14601]: Kernel quiescent wait on 13 (in kernel_wait_quiescent() at kernel.c:570)
DEBUG1 - 10:05:35.745053 [14540/14607]: Thread kernel return from poll on 2 fds (in thread_manage_kernel() at main.c:1127)
DEBUG1 - 10:05:35.745789 [14540/14607]: Updating kernel poll set (in update_kernel_poll() at main.c:910)
DEBUG1 - 10:05:35.853454 [14540/14601]: Trying to find channel channel0 (in trace_kernel_get_channel_by_name() at trace-kernel.c:49)
DEBUG1 - 10:05:35.853839 [14540/14601]: Found channel by name channel0 (in trace_kernel_get_channel_by_name() at trace-kernel.c:53)
Warning: Event * not found!
DEBUG3 - 10:05:35.854838 [14540/14601]: Kernel destroy channel channel0 (in kernel_destroy_channel() at kernel.c:956)
DEBUG1 - 10:05:35.854937 [14540/14601]: [trace] Closing channel fd 39 (in trace_kernel_destroy_channel() at trace-kernel.c:482)
DEBUG1 - 10:05:35.855160 [14540/14601]: Sending response (size: 16, retcode: Enable kernel event failed) (in thread_manage_clients() at main.c:4456)
DEBUG1 - 10:05:35.855269 [14540/14607]: Thread kernel polling (in thread_manage_kernel() at main.c:1120)
DEBUG1 - 10:05:35.855485 [14540/14601]: Clean command context structure (in clean_command_ctx() at main.c:829)
DEBUG1 - 10:05:35.856010 [14540/14601]: Accepting client command ... (in thread_manage_clients() at main.c:4310)
Error: Events: Enable kernel event failed (channel channel0, session kernel_test)
Error: Command error
Is there any advice ?
Thankszhenyu.ren------------------------------------------------------------------发件人：zhenyu.ren <zhenyu.ren@aliyun.com>发送时间：2015年11月11日(星期三) 09:32收件人：Jérémie Galarneau <jeremie.galarneau@efficios.com>抄　送：lttng-dev <lttng-dev@lists.lttng.org>主　题：[lttng-dev] 答复： 2.7.0 not support enable-event -k -a
  In fact, I made some changes in lttng toolchain(module/tool/ust) to support older kernel/OS.These changes are OK for Lttng 2.6 .Since you are sure "enable-event -k -a" has no problem,it's more chance that I made some inappropriate changes.

Thankszhenyu.ren------------------------------------------------------------------发件人：Jérémie Galarneau <jeremie.galarneau@efficios.com>发送时间：2015年11月10日(星期二) 23:09收件人：zhenyu.ren <zhenyu.ren@aliyun.com>抄　送：lttng-dev <lttng-dev@lists.lttng.org>，Jonathan Rajotte Julien <Jonathan.rajotte-julien@efficios.com>主　题：Re: [lttng-dev] 2.7.0 not support enable-event -k -a
On Tue, Nov 10, 2015 at 10:02 AM, Jonathan Rajotte Julien
<Jonathan.rajotte-julien@efficios.com> wrote:
> Hi Zhenyu,
>
> I just tested it on a Ubuntu 15.10 with kernel 4.2.3 with no problem.
>
> Did you install from source/ppa ? Could you give us all the steps involved ?
>
> Make sure to go over [1] to help us pinpoint the problem.
>
> [1] https://lttng.org/community/#bug-reporting-guidelines

Make sure you include the verbose logs of the session daemon by
launching it with the '-vvv' switch.
Also, please check that your lttng-modules version matches the rest of
the toolchain (v2.7.x)

Thanks!
Jérémie

>
> Cheers!
>
>
> On 2015-11-10 03:17 AM, zhenyu.ren wrote:
>>
>> Hi,dev-team
>>
>>    I got the following erros when I run the commd :lttng enable-event -k
>> -a
>> "Error: Events: Enable kernel event failed (channel channel0, session
>> kernel_test)
>> Error: Command error"
>>   It seems that LTTNG-2.7.0 do NOT support enable-event option "--all". Is
>> that right?If wo ,what's the idea behind it?
>>
>> Thanks
>> zhenyu.ren
>>
>>
>>
>> _______________________________________________
>> lttng-dev mailing list
>> lttng-dev@lists.lttng.org
>> http://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev
>
>
> --
> Jonathan R. Julien
> Efficios
>
>
> _______________________________________________
> lttng-dev mailing list
> lttng-dev@lists.lttng.org
> http://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev



-- 
Jérémie Galarneau
EfficiOS Inc.
http://www.efficios.com


[-- Attachment #1.2: Type: text/html, Size: 13813 bytes --]

[-- Attachment #2: Type: text/plain, Size: 155 bytes --]

_______________________________________________
lttng-dev mailing list
lttng-dev@lists.lttng.org
http://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev

Re: 答复： 答复： 2.7.0 not support enable-event -k -a

[Jérémie Galarneau]

Hi Zhenyu,

LTTng 2.7.0 has introduced event name wildcard support to kernel
space. In your specific case, the reason you see the call sequence
being so different is because we used to list all events and enable
them one by one.

Nowadays, we simply use the "enablers" mechanism, which has been
available on the lttng-ust side for a while, to enable all events
which match the "*" name.

It appears that your modified lttng-modules expects the 2.6.x behaviour.

Jérémie

On Tue, Nov 10, 2015 at 11:18 PM, zhenyu.ren <zhenyu.ren@aliyun.com> wrote:
> Hi，Galarneau
>
>     It seems that ,for "enable-event -k -a", Lttng-2.7.0 will call
> kernctl_create_event() to do a LTTNG_KERNEL_EVENT ioctl operation for the
> event(*)(in cmd_enable_event()). However,In Lttng-2.6.0,it will first call
> kernel_list_events() to get all kenel events , then iterator the list and
> call kernel_create_event() for every event(in
> event_kernel_enable_all_tracepoints()).  Is that right?
>
>    Is this " Warning: Event * not found!" appeared in your case.
>
> PS:my kernel: 2.6.32-220.23.2.el5.x86_64(RHEL6)
>      Lttng-toolchain:2.7.0
>
> Thanks in advance
> zhenyu.ren
>
>
> ------------------------------------------------------------------
> 发件人：zhenyu.ren <zhenyu.ren@aliyun.com>
> 发送时间：2015年11月11日(星期三) 10:37
> 收件人：zhenyu.ren <zhenyu.ren@aliyun.com>，Jérémie Galarneau
> <jeremie.galarneau@efficios.com>
> 抄　送：lttng-dev <lttng-dev@lists.lttng.org>
> 主　题：答复：[lttng-dev] 答复： 2.7.0 not support enable-event -k -a
>
> Sorry，forget to post the verbose logs of lttng-sessiond.
>
> DEBUG3 - 10:05:34.476087 [15262/15262]: Looking for a kernel consumer at
> these locations: (in spawn_consumerd() at main.c:2516)
> DEBUG3 - 10:05:34.476595 [15262/15262]:         1)
> /usr/local/lib/lttng/libexec/lttng-consumerd (in spawn_consumerd() at
> main.c:2517)
> DEBUG3 - 10:05:34.476682 [15262/15262]:         2)
> /usr/local/lib/lttng/libexec/lttng-consumerd (in spawn_consumerd() at
> main.c:2518)
> DEBUG1 - 10:05:34.476462 [14540/15263]: [thread] Manage consumer started (in
> thread_manage_consumer() at main.c:1249)
> DEBUG3 - 10:05:34.476765 [15262/15262]:         3)  (in spawn_consumerd() at
> main.c:2519)
> DEBUG3 - 10:05:34.477658 [15262/15262]: Found location #1 (in
> spawn_consumerd() at main.c:2521)
> DEBUG1 - 10:05:34.477742 [15262/15262]: Using kernel consumer at:
> /usr/local/lib/lttng/libexec/lttng-consumerd (in spawn_consumerd() at
> main.c:2534)
> DEBUG2 - 10:05:34.275827 [14540/15263]: Receiving code from consumer
> err_sock (in thread_manage_consumer() at main.c:1347)
> DEBUG1 - 10:05:34.376523 [14540/15263]: Consumer command socket ready (fd:
> 37 (in thread_manage_consumer() at main.c:1381)
> DEBUG1 - 10:05:34.376554 [14540/15263]: Consumer metadata socket ready (fd:
> 38) (in thread_manage_consumer() at main.c:1383)
> DEBUG3 - 10:05:34.376545 [14540/14601]: Consumer socket created (fd: 37) and
> added to output (in consumer_create_socket() at consumer.c:302)
> DEBUG1 - 10:05:34.376585 [14540/14601]: Setting relayd for session
> kernel_test (in cmd_setup_relayd() at cmd.c:761)
> DEBUG1 - 10:05:34.376599 [14540/14601]: Enable event command for event '*'
> (in _cmd_enable_event() at cmd.c:1524)
> DEBUG1 - 10:05:34.376619 [14540/14601]: Trying to find channel channel0 (in
> trace_kernel_get_channel_by_name() at trace-kernel.c:49)
> DEBUG1 - 10:05:34.376652 [14540/14601]: Enabling channel  for session
> kernel_test (in cmd_enable_channel() at cmd.c:1054)
> DEBUG1 - 10:05:34.376662 [14540/14601]: Trying to find channel channel0 (in
> trace_kernel_get_channel_by_name() at trace-kernel.c:49)
> DEBUG3 - 10:05:34.376679 [14540/14601]: Kernel create channel  with attr: 0,
> 262144, 4, 0, 200000, 0, 0 (in kernel_create_channel() at kernel.c:140)
> DEBUG1 - 10:05:35.744393 [14540/14601]: Kernel channel channel0 created (fd:
> 39) (in kernel_create_channel() at kernel.c:162)
> DEBUG1 - 10:05:35.744972 [14540/14601]: Kernel quiescent wait on 13 (in
> kernel_wait_quiescent() at kernel.c:570)
> DEBUG1 - 10:05:35.745053 [14540/14607]: Thread kernel return from poll on 2
> fds (in thread_manage_kernel() at main.c:1127)
> DEBUG1 - 10:05:35.745789 [14540/14607]: Updating kernel poll set (in
> update_kernel_poll() at main.c:910)
> DEBUG1 - 10:05:35.853454 [14540/14601]: Trying to find channel channel0 (in
> trace_kernel_get_channel_by_name() at trace-kernel.c:49)
> DEBUG1 - 10:05:35.853839 [14540/14601]: Found channel by name channel0 (in
> trace_kernel_get_channel_by_name() at trace-kernel.c:53)
> Warning: Event * not found!
> DEBUG3 - 10:05:35.854838 [14540/14601]: Kernel destroy channel channel0 (in
> kernel_destroy_channel() at kernel.c:956)
> DEBUG1 - 10:05:35.854937 [14540/14601]: [trace] Closing channel fd 39 (in
> trace_kernel_destroy_channel() at trace-kernel.c:482)
> DEBUG1 - 10:05:35.855160 [14540/14601]: Sending response (size: 16, retcode:
> Enable kernel event failed) (in thread_manage_clients() at main.c:4456)
> DEBUG1 - 10:05:35.855269 [14540/14607]: Thread kernel polling (in
> thread_manage_kernel() at main.c:1120)
> DEBUG1 - 10:05:35.855485 [14540/14601]: Clean command context structure (in
> clean_command_ctx() at main.c:829)
> DEBUG1 - 10:05:35.856010 [14540/14601]: Accepting client command ... (in
> thread_manage_clients() at main.c:4310)
> Error: Events: Enable kernel event failed (channel channel0, session
> kernel_test)
> Error: Command error
>
> Is there any advice ?
>
> Thanks
> zhenyu.ren
> ------------------------------------------------------------------
> 发件人：zhenyu.ren <zhenyu.ren@aliyun.com>
> 发送时间：2015年11月11日(星期三) 09:32
> 收件人：Jérémie Galarneau <jeremie.galarneau@efficios.com>
> 抄　送：lttng-dev <lttng-dev@lists.lttng.org>
> 主　题：[lttng-dev] 答复： 2.7.0 not support enable-event -k -a
>
>   In fact, I made some changes in lttng toolchain(module/tool/ust) to
> support older kernel/OS.These changes are OK for Lttng 2.6 .Since you are
> sure "enable-event -k -a" has no problem,it's more chance that I made some
> inappropriate changes.
>
>
> Thanks
> zhenyu.ren
> ------------------------------------------------------------------
> 发件人：Jérémie Galarneau <jeremie.galarneau@efficios.com>
> 发送时间：2015年11月10日(星期二) 23:09
> 收件人：zhenyu.ren <zhenyu.ren@aliyun.com>
> 抄　送：lttng-dev <lttng-dev@lists.lttng.org>，Jonathan Rajotte Julien
> <Jonathan.rajotte-julien@efficios.com>
> 主　题：Re: [lttng-dev] 2.7.0 not support enable-event -k -a
>
> On Tue, Nov 10, 2015 at 10:02 AM, Jonathan Rajotte Julien
> <Jonathan.rajotte-julien@efficios.com> wrote:
>> Hi Zhenyu,
>>
>> I just tested it on a Ubuntu 15.10 with kernel 4.2.3 with no problem.
>>
>> Did you install from source/ppa ? Could you give us all the steps involved
>> ?
>>
>> Make sure to go over [1] to help us pinpoint the problem.
>>
>> [1] https://lttng.org/community/#bug-reporting-guidelines
>
> Make sure you include the verbose logs of the session daemon by
> launching it with the '-vvv' switch.
> Also, please check that your lttng-modules version matches the rest of
> the toolchain (v2.7.x)
>
> Thanks!
> Jérémie
>
>>
>> Cheers!
>>
>>
>> On 2015-11-10 03:17 AM, zhenyu.ren wrote:
>>>
>>> Hi,dev-team
>>>
>>>    I got the following erros when I run the commd :lttng enable-event -k
>>> -a
>>> "Error: Events: Enable kernel event failed (channel channel0, session
>>> kernel_test)
>>> Error: Command error"
>>>   It seems that LTTNG-2.7.0 do NOT support enable-event option "--all".
>>> Is
>>> that right?If wo ,what's the idea behind it?
>>>
>>> Thanks
>>> zhenyu.ren
>>>
>>>
>>>
>>> _______________________________________________
>>> lttng-dev mailing list
>>> lttng-dev@lists.lttng.org
>>> http://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev
>>
>>
>> --
>> Jonathan R. Julien
>> Efficios
>>
>>
>> _______________________________________________
>> lttng-dev mailing list
>> lttng-dev@lists.lttng.org
>> http://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev
>
>
>
> --
> Jérémie Galarneau
> EfficiOS Inc.
> http://www.efficios.com
>
>
>



-- 
Jérémie Galarneau
EfficiOS Inc.
http://www.efficios.com

_______________________________________________
lttng-dev mailing list
lttng-dev@lists.lttng.org
http://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev