* Qoriq p3041ds no ethernet interface probed
@ 2013-08-02 11:24 Mercier Ivan
2013-08-05 9:32 ` Luo Zhenhua-B19537
0 siblings, 1 reply; 8+ messages in thread
From: Mercier Ivan @ 2013-08-02 11:24 UTC (permalink / raw)
To: meta-freescale
[-- Attachment #1.1: Type: text/plain, Size: 1152 bytes --]
Hi everybody,
I'm trying to make my 1G ethernet working on freescale p3041ds board.
It works on U-boot but still doesn't work in Linux....
here is my conf:
gcc version 4.6.3 20120301 (Wed Dec 5 19:16:53 CST 2012 build.sh
rev=777 s=F463 -i /pkg/fs-DTgnu- ELe500mc -V
release-CDE-r777_eabi_F463_ELe500mc) (GCC)
Linux p3041ds 3.8.13-rt9 from git://git.freescale.com/ppc/sdk/linux.git
device tree from arch/powerpc/boot/dts/p3041ds.dts
root file system builded with yocto from freescale sdk 1.4
On boot,
I can see my ethernet interface probed
Freescale FM module (Aug 2 2013:10:34:14), FMD API version 21.1.0
Freescale FM Ports module (Aug 2 2013:10:34:14)
dpaa_debugfs: FSL DPAA Ethernet debugfs entries ()
fsl_mac: mac.c:417:mac_load() fsl_mac: FSL FMan MAC API based driver ()
fsl_mac ffe4e0000.ethernet: FMan dTSEC version: 0x08240101
fsl_mac ffe4e0000.ethernet: FMan MAC address: 00:11:55:77:88:99
but
#ifconfig -a returns only loopback interface.
Does anybody know where this problem could be from?
device tree?uboot conf?linux conf?
Many thanks
attached: my device tree source and linux .config
[-- Attachment #1.2: Type: text/html, Size: 3034 bytes --]
[-- Attachment #2: .config --]
[-- Type: application/octet-stream, Size: 53150 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/powerpc 3.8.13 Kernel Configuration
#
# CONFIG_PPC64 is not set
#
# Processor support
#
# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_E500=y
CONFIG_PPC_E500MC=y
CONFIG_FSL_ERRATUM_A_004801=y
CONFIG_FSL_ERRATUM_A_005337=y
# CONFIG_FSL_ERRATUM_A_006184 is not set
CONFIG_FSL_ERRATUM_A_006184_PERIOD=43
# CONFIG_PPC_DISABLE_THREADS is not set
# CONFIG_FSL_ERRATUM_A_006198 is not set
CONFIG_PPC_FPU=y
CONFIG_FSL_EMB_PERFMON=y
CONFIG_FSL_EMB_PERF_EVENT=y
CONFIG_FSL_EMB_PERF_EVENT_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
CONFIG_PPC_FSL_BOOK3E=y
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
CONFIG_PPC_MMU_NOHASH=y
CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=8
CONFIG_PPC32=y
CONFIG_32BIT=y
CONFIG_WORD_SIZE=32
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_MMU=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_PPC_UDBG_16550=y
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_EPAPR_BOOT is not set
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_PPC_ADV_DEBUG_REGS=y
CONFIG_PPC_ADV_DEBUG_IACS=2
CONFIG_PPC_ADV_DEBUG_DACS=2
CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION="-wp6"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_FHANDLE is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_TIME_VSYSCALL_OLD=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
CONFIG_TREE_RCU_TRACE=y
# CONFIG_RCU_NOCB_CPU is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_NAMESPACES is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EXPERT=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_CLONE_BACKWARDS=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
CONFIG_PPC_MSI_BITMAP=y
# CONFIG_PPC_XICS is not set
# CONFIG_PPC_ICP_NATIVE is not set
# CONFIG_PPC_ICP_HV is not set
# CONFIG_PPC_ICS_RTAS is not set
# CONFIG_GE_FPGA is not set
CONFIG_FSL_CORENET_RCPM=y
#
# Platform support
#
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
CONFIG_FSL_SOC_BOOKE=y
CONFIG_FSL_85XX_CACHE_SRAM=y
# CONFIG_BSC9131_RDB is not set
# CONFIG_BSC9132_QDS is not set
# CONFIG_C293_PCIE is not set
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
# CONFIG_MPC85xx_RDB is not set
# CONFIG_P1010_RDB is not set
# CONFIG_P1022_DS is not set
# CONFIG_P1022_RDK is not set
# CONFIG_P1023_RDB is not set
# CONFIG_P1023_RDS is not set
# CONFIG_TWR_P102x is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_XES_MPC85xx is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
# CONFIG_TQM8548 is not set
# CONFIG_TQM8555 is not set
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_GE_IMP3A is not set
# CONFIG_P2041_RDB is not set
CONFIG_P3041_DS=y
# CONFIG_P4080_DS is not set
# CONFIG_P5020_DS is not set
# CONFIG_P5040_DS is not set
# CONFIG_PPC_QEMU_E500 is not set
# CONFIG_PPC_WSP is not set
# CONFIG_KVM_GUEST is not set
CONFIG_EPAPR_PARAVIRT=y
CONFIG_PPC_SMP_MUXED_IPI=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_TIMER is not set
CONFIG_PPC_EPAPR_HV_PIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_MPIC_MSGR is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
# CONFIG_MPIC_U3_HT_IRQS is not set
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_P7_NAP is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# CPUIdle driver
#
# CONFIG_CPU_IDLE is not set
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_QUICC_ENGINE is not set
# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
#
CONFIG_HIGHMEM=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_HAVE_PREEMPT_LAZY=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT__LL is not set
# CONFIG_PREEMPT_RTB is not set
# CONFIG_PREEMPT_RT_FULL is not set
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_IOMMU_HELPER=y
CONFIG_SWIOTLB=y
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
CONFIG_PPC_4K_PAGES=y
CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_CMDLINE_BOOL is not set
CONFIG_EXTRA_TARGETS=""
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_CLK=y
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
CONFIG_FSL_LBC=y
# CONFIG_FSL_FMAN_CPC_STASH is not set
CONFIG_HAS_FSL_QBMAN=y
CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HAS_RAPIDIO=y
CONFIG_RAPIDIO=y
CONFIG_FSL_RIO=y
# CONFIG_RAPIDIO_TSI721 is not set
CONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
# CONFIG_RAPIDIO_DMA_ENGINE is not set
# CONFIG_RAPIDIO_DEBUG is not set
# CONFIG_RAPIDIO_TSI57X is not set
# CONFIG_RAPIDIO_CPS_XX is not set
# CONFIG_RAPIDIO_TSI568 is not set
# CONFIG_RAPIDIO_CPS_GEN2 is not set
# CONFIG_RAPIDIO_TSI500 is not set
# CONFIG_NONSTATIC_KERNEL is not set
#
# Advanced setup
#
CONFIG_ADVANCED_OPTIONS=y
# CONFIG_LOWMEM_SIZE_BOOL is not set
CONFIG_LOWMEM_SIZE=0x30000000
# CONFIG_LOWMEM_CAM_NUM_BOOL is not set
CONFIG_LOWMEM_CAM_NUM=3
# CONFIG_DYNAMIC_MEMSTART is not set
# CONFIG_PAGE_OFFSET_BOOL is not set
CONFIG_PAGE_OFFSET=0xc0000000
# CONFIG_KERNEL_START_BOOL is not set
CONFIG_KERNEL_START=0xc0000000
# CONFIG_PHYSICAL_START_BOOL is not set
CONFIG_PHYSICAL_START=0x00000000
CONFIG_PHYSICAL_ALIGN=0x04000000
# CONFIG_TASK_SIZE_BOOL is not set
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_IP_MROUTE=y
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_ARPD=y
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_BQL=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
# CONFIG_DMA_SHARED_BUFFER is not set
#
# Bus devices
#
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_CHAR is not set
# CONFIG_MTD_BLKDEVS is not set
# CONFIG_MTD_BLOCK is not set
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_SWAP is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_PHYSMAP_OF is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
CONFIG_MTD_M25P80=y
CONFIG_M25PXX_USE_FAST_READ=y
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_UBI is not set
CONFIG_DTC=y
CONFIG_OF=y
#
# Device Tree and Open Firmware support
#
CONFIG_PROC_DEVICETREE=y
CONFIG_OF_SELFTEST=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_NET=y
CONFIG_OF_MDIO=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_OF_MTD=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=131072
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_ATMEL_PWM is not set
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_FSL_USDPAA=y
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_BMP085_SPI is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_SENSORS_LIS3_I2C is not set
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_ATA_VERBOSE_ERROR is not set
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_SATA_FSL=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_ATA_SFF is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_AS_FASTPATH is not set
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
CONFIG_MII=y
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_RIONET is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
#
# CAIF transport drivers
#
#
# Distributed Switch Architecture drivers
#
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EXAR is not set
CONFIG_NET_VENDOR_FREESCALE=y
CONFIG_FSL_PQ_MDIO=y
CONFIG_FSL_XGMAC_MDIO=y
CONFIG_GIANFAR=y
#
# Frame Manager support
#
CONFIG_FSL_FMAN=y
# CONFIG_FSL_FMAN_TEST is not set
#
# FMAN Processor support
#
CONFIG_FMAN_P3040_P4080_P5020=y
# CONFIG_FMAN_P1023 is not set
# CONFIG_FMAN_T4240 is not set
CONFIG_FMAN_RESOURCE_ALLOCATION_ALGORITHM=y
# CONFIG_FMAN_DISABLE_OH_TO_REUSE_RESOURCES is not set
# CONFIG_FMAN_MIB_CNT_OVF_IRQ_EN is not set
CONFIG_FSL_FM_MAX_FRAME_SIZE=1522
CONFIG_FSL_FM_RX_EXTRA_HEADROOM=64
CONFIG_FSL_DPAA_ETH=y
CONFIG_FSL_DPAA_OFFLINE_PORTS=y
CONFIG_FSL_DPAA_ETH_OPTIMIZE_FOR_IPFWD=y
# CONFIG_FSL_DPAA_ETH_OPTIMIZE_FOR_TERM is not set
# CONFIG_FSL_DPAA_1588 is not set
# CONFIG_FSL_DPAA_TS is not set
# CONFIG_FSL_DPAA_ETH_WQ_LEGACY is not set
CONFIG_FSL_DPAA_ETH_WQ_MULTI=y
CONFIG_FSL_DPAA_ETH_USE_NDO_SELECT_QUEUE=y
CONFIG_FSL_DPAA_ETH_MAX_BUF_COUNT=128
CONFIG_FSL_DPAA_ETH_REFILL_THRESHOLD=80
# CONFIG_FSL_DPAA_ETH_UNIT_TESTS is not set
CONFIG_FSL_DPAA_ETH_DEBUGFS=y
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=m
CONFIG_E1000E=m
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
CONFIG_NET_VENDOR_I825XX=y
# CONFIG_IP1000 is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MV643XX_ETH is not set
CONFIG_MVMDIO=y
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_PACKET_ENGINE is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_REALTEK is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_SFC is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_NET_VENDOR_XILINX is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_AT803X_PHY is not set
# CONFIG_AMD_PHY is not set
# CONFIG_ATHEROS_PHY is not set
CONFIG_MARVELL_PHY=m
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
CONFIG_VITESSE_PHY=m
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_DP8384x_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_MDIO_BUS_MUX=y
CONFIG_MDIO_BUS_MUX_GPIO=m
CONFIG_MDIO_BUS_MUX_MMIOREG=y
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_PPC_EPAPR_HV_BYTECHAN=y
# CONFIG_PPC_EARLY_DEBUG_EHV_BC is not set
CONFIG_DEVKMEM=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_FSL=y
# CONFIG_SERIAL_8250_DW is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_MFD_HSU is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_ATMEL is not set
# CONFIG_HW_RANDOM_EXYNOS is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_INTEL_MID is not set
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
CONFIG_SPI_BITBANG=y
CONFIG_SPI_GPIO=y
CONFIG_SPI_FSL_LIB=y
CONFIG_SPI_FSL_SPI=y
CONFIG_SPI_FSL_ESPI=y
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_TOPCLIFF_PCH is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_HSI is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
# CONFIG_PTP_1588_CLOCK_GIANFAR is not set
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PTP_1588_CLOCK_PCH is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_OF_GPIO=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
CONFIG_GPIO_MPC8XXX=y
# CONFIG_GPIO_TS5500 is not set
# CONFIG_GPIO_XILINX is not set
# CONFIG_GPIO_VX855 is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ADNP is not set
#
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_74X164 is not set
#
# AC97 GPIO expanders:
#
#
# MODULbus GPIO expanders:
#
#
# USB GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_POWER_AVS is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_RTSX_PCI is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_TIMBERDALE is not set
# CONFIG_LPC_SCH is not set
# CONFIG_LPC_ICH is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_STUB_POULSBO is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_FB is not set
# CONFIG_EXYNOS_VIDEO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
#
# HID support
#
CONFIG_HID=y
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER=y
# CONFIG_MMC_SDHCI_PCI is not set
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_ESDHC=y
# CONFIG_MMC_SDHCI_OF_HLWD is not set
# CONFIG_MMC_SDHCI_PXAV3 is not set
# CONFIG_MMC_SDHCI_PXAV2 is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
CONFIG_RTC_DRV_TEST=y
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
CONFIG_RTC_DRV_DS3232=y
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_DS2404 is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_GENERIC=y
CONFIG_RTC_DRV_SNVS=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
CONFIG_STAGING=y
# CONFIG_ET131X is not set
# CONFIG_ECHO is not set
# CONFIG_DX_SEP is not set
# CONFIG_ZSMALLOC is not set
# CONFIG_CRYSTALHD is not set
# CONFIG_FT1000 is not set
#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_STAGING_MEDIA is not set
#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_WIMAX_GDM72XX is not set
# CONFIG_NET_VENDOR_SILICOM is not set
# CONFIG_DGRP is not set
CONFIG_FSL_DPA=y
#
# Freescale Datapath QMan/BMan options
#
CONFIG_FSL_DPA_CHECKING=y
CONFIG_FSL_DPA_CAN_WAIT=y
CONFIG_FSL_DPA_CAN_WAIT_SYNC=y
CONFIG_FSL_DPA_PIRQ_FAST=y
CONFIG_FSL_DPA_PIRQ_SLOW=y
CONFIG_FSL_DPA_PORTAL_SHARE=y
CONFIG_FSL_BMAN=y
CONFIG_FSL_BMAN_CONFIG=y
# CONFIG_FSL_BMAN_TEST is not set
# CONFIG_FSL_BMAN_DEBUGFS is not set
CONFIG_FSL_QMAN=y
CONFIG_FSL_QMAN_BUG_AND_FEATURE_REV1=y
CONFIG_FSL_QMAN_POLL_LIMIT=32
CONFIG_FSL_QMAN_CONFIG=y
# CONFIG_FSL_QMAN_TEST is not set
# CONFIG_FSL_QMAN_DEBUGFS is not set
CONFIG_FSL_QMAN_FQD_SZ=10
CONFIG_FSL_QMAN_PFDR_SZ=13
CONFIG_FSL_QMAN_CI_SCHED_CFG_SRCCIV=4
CONFIG_FSL_QMAN_CI_SCHED_CFG_SRQ_W=3
CONFIG_FSL_QMAN_CI_SCHED_CFG_RW_W=2
CONFIG_FSL_QMAN_CI_SCHED_CFG_BMAN_W=2
CONFIG_FSL_QMAN_PIRQ_DQRR_ITHRESH=12
CONFIG_FSL_QMAN_PIRQ_MR_ITHRESH=4
CONFIG_FSL_QMAN_PIRQ_IPERIOD=100
# CONFIG_FSL_QMAN_FQ_LOOKUP is not set
CONFIG_QMAN_CEETM_UPDATE_PERIOD=1000
CONFIG_FSL_PME2=y
#
# Freescale Datapath PME options
#
CONFIG_FSL_PME2_CTRL=y
CONFIG_FSL_PME2_PDSRSIZE=131072
#
# Statefule Rule Engine
#
CONFIG_FSL_PME2_SRESIZE=327680
# CONFIG_FSL_PME2_SRE_AIM is not set
# CONFIG_FSL_PME2_SRE_ESR is not set
CONFIG_FSL_PME2_SRE_CTX_SIZE_PER_SESSION=17
CONFIG_FSL_PME2_SRE_CNR=128
CONFIG_FSL_PME2_SRE_MAX_INSTRUCTION_LIMIT=65535
CONFIG_FSL_PME2_SRE_MAX_BLOCK_NUMBER=32767
CONFIG_FSL_PME2_PORTAL=y
# CONFIG_FSL_PME2_TEST_HIGH is not set
# CONFIG_FSL_PME2_TEST_SCAN is not set
CONFIG_FSL_PME2_DB=y
CONFIG_FSL_PME2_DB_QOSOUT_PRIORITY=2
CONFIG_FSL_PME2_SCAN=y
# CONFIG_FSL_PME2_SCAN_DEBUG is not set
CONFIG_FSL_PME_BUG_4K_SCAN_REV_2_1_4=y
CONFIG_FSL_PME2_STAT_ACCUMULATOR_UPDATE_INTERVAL=3400
# CONFIG_FSL_DPA_OFFLOAD is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_DEBUG is not set
# CONFIG_CLK_PPC_CORENET is not set
#
# Hardware Spinlock drivers
#
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
CONFIG_OF_IOMMU=y
CONFIG_FSL_PAMU=y
# CONFIG_DUMMY_IOMMU is not set
#
# Remoteproc drivers (EXPERIMENTAL)
#
# CONFIG_STE_MODEM_RPROC is not set
#
# Rpmsg drivers (EXPERIMENTAL)
#
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
# CONFIG_IPACK_BUS is not set
# CONFIG_TDM is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4_FS is not set
CONFIG_FS_XIP=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_EXPORTFS=m
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V2 is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFSD=m
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_V4 is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SUNRPC_BACKCHANNEL=y
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=m
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_PERCPU_RWSEM=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
# CONFIG_CRC8 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
# CONFIG_AVERAGE is not set
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_LOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_CPU_STALL_INFO is not set
CONFIG_RCU_TRACE=y
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_LKDTM is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_MISSED_TIMER_OFFSETS_HIST is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_UPROBE_EVENT is not set
# CONFIG_PROBE_EVENTS is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_DEBUG_CW is not set
# CONFIG_PPC_EARLY_DEBUG is not set
CONFIG_STRICT_DEVMEM=y
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=y
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
# CONFIG_VIRTUALIZATION is not set
[-- Attachment #3: p3041ds.dts --]
[-- Type: application/octet-stream, Size: 40783 bytes --]
/dts-v1/;
/ {
compatible = "fsl,P3041DS";
#address-cells = <0x2>;
#size-cells = <0x2>;
interrupt-parent = <0x1>;
model = "fsl,P3041DS";
cpus {
power-isa-version = "2.06";
power-isa-b;
power-isa-e;
power-isa-atb;
power-isa-cs;
power-isa-ds;
power-isa-e.ed;
power-isa-e.pd;
power-isa-e.hv;
power-isa-e.le;
power-isa-e.pm;
power-isa-e.pc;
power-isa-ecl;
power-isa-exp;
power-isa-fp;
power-isa-fp.r;
power-isa-mmc;
power-isa-scpm;
power-isa-wt;
fsl,eref-deo;
mmu-type = "power-embedded";
#address-cells = <0x1>;
#size-cells = <0x0>;
PowerPC,e500mc@0 {
device_type = "cpu";
reg = <0x0>;
clocks = <0x2>;
next-level-cache = <0x3>;
linux,phandle = <0xc>;
phandle = <0xc>;
l2-cache {
next-level-cache = <0x4>;
linux,phandle = <0x3>;
phandle = <0x3>;
};
};
PowerPC,e500mc@1 {
device_type = "cpu";
reg = <0x1>;
clocks = <0x5>;
next-level-cache = <0x6>;
linux,phandle = <0xd>;
phandle = <0xd>;
l2-cache {
next-level-cache = <0x4>;
linux,phandle = <0x6>;
phandle = <0x6>;
};
};
PowerPC,e500mc@2 {
device_type = "cpu";
reg = <0x2>;
clocks = <0x7>;
next-level-cache = <0x8>;
linux,phandle = <0xe>;
phandle = <0xe>;
l2-cache {
next-level-cache = <0x4>;
linux,phandle = <0x8>;
phandle = <0x8>;
};
};
PowerPC,e500mc@3 {
device_type = "cpu";
reg = <0x3>;
clocks = <0x9>;
next-level-cache = <0xa>;
linux,phandle = <0xf>;
phandle = <0xf>;
l2-cache {
next-level-cache = <0x4>;
linux,phandle = <0xa>;
phandle = <0xa>;
};
};
};
aliases {
ccsr = "/soc@ffe000000";
dcsr = "/dcsr@f00000000";
serial0 = "/soc@ffe000000/serial@11c500";
serial1 = "/soc@ffe000000/serial@11c600";
serial2 = "/soc@ffe000000/serial@11d500";
serial3 = "/soc@ffe000000/serial@11d600";
pci0 = "/pcie@ffe200000";
pci1 = "/pcie@ffe201000";
pci2 = "/pcie@ffe202000";
pci3 = "/pcie@ffe203000";
usb0 = "/soc@ffe000000/usb@210000";
usb1 = "/soc@ffe000000/usb@211000";
dma0 = "/soc@ffe000000/dma@100300";
dma1 = "/soc@ffe000000/dma@101300";
sdhc = "/soc@ffe000000/sdhc@114000";
msi0 = "/soc@ffe000000/msi@41600";
msi1 = "/soc@ffe000000/msi@41800";
msi2 = "/soc@ffe000000/msi@41a00";
crypto = "/soc@ffe000000/crypto@300000";
sec_jr0 = "/soc@ffe000000/crypto@300000/jr@1000";
sec_jr1 = "/soc@ffe000000/crypto@300000/jr@2000";
sec_jr2 = "/soc@ffe000000/crypto@300000/jr@3000";
sec_jr3 = "/soc@ffe000000/crypto@300000/jr@4000";
rtic_a = "/soc@ffe000000/crypto@300000/rtic@6000/rtic-a@0";
rtic_b = "/soc@ffe000000/crypto@300000/rtic@6000/rtic-b@20";
rtic_c = "/soc@ffe000000/crypto@300000/rtic@6000/rtic-c@40";
rtic_d = "/soc@ffe000000/crypto@300000/rtic@6000/rtic-d@60";
sec_mon = "/soc@ffe000000/sec_mon@314000";
rman = "/soc@ffe000000/rman@1e0000";
pme = "/soc@ffe000000/pme@316000";
qman = "/soc@ffe000000/qman@318000";
bman = "/soc@ffe000000/bman@31a000";
fman0 = "/soc@ffe000000/fman@400000";
ethernet0 = "/soc@ffe000000/fman@400000/ethernet@e0000";
phy_rgmii_0 = "/localbus@ffe124000/board-control@3,0/mdio-mux-emi1/rgmii-mdio@8/ethernet-phy@0";
phy_rgmii_1 = "/localbus@ffe124000/board-control@3,0/mdio-mux-emi1/rgmii-mdio@8/ethernet-phy@1";
phy_sgmii_1c = "/localbus@ffe124000/board-control@3,0/mdio-mux-emi1/sgmii-mdio@28/ethernet-phy@1c";
phy_sgmii_1d = "/localbus@ffe124000/board-control@3,0/mdio-mux-emi1/sgmii-mdio@28/ethernet-phy@1d";
phy_sgmii_1e = "/localbus@ffe124000/board-control@3,0/mdio-mux-emi1/sgmii-mdio@28/ethernet-phy@1e";
phy_sgmii_1f = "/localbus@ffe124000/board-control@3,0/mdio-mux-emi1/sgmii-mdio@28/ethernet-phy@1f";
phy_xgmii_1 = "/soc@ffe000000/fman@400000/mdio@f1000/ethernet-phy@4";
phy_xgmii_2 = "/soc@ffe000000/fman@400000/mdio@f1000/ethernet-phy@0";
emi1_rgmii = "/localbus@ffe124000/board-control@3,0/mdio-mux-emi1/rgmii-mdio@8";
emi1_sgmii = "/localbus@ffe124000/board-control@3,0/mdio-mux-emi1/sgmii-mdio@28";
emi2_xgmii = "/soc@ffe000000/fman@400000/mdio@f1000";
};
memory {
device_type = "memory";
};
dcsr@f00000000 {
ranges = <0x0 0xf 0x0 0x1008000>;
#address-cells = <0x1>;
#size-cells = <0x1>;
compatible = "fsl,dcsr", "simple-bus";
dcsr-epu@0 {
compatible = "fsl,p3041-dcsr-epu", "fsl,dcsr-epu";
interrupts = <0x34 0x2 0x0 0x0 0x54 0x2 0x0 0x0 0x55 0x2 0x0 0x0>;
reg = <0x0 0x1000>;
};
dcsr-npc {
compatible = "fsl,dcsr-npc";
reg = <0x1000 0x1000 0x1000000 0x8000>;
};
dcsr-nxc@2000 {
compatible = "fsl,dcsr-nxc";
reg = <0x2000 0x1000>;
};
dcsr-corenet {
compatible = "fsl,dcsr-corenet";
reg = <0x8000 0x1000 0xb0000 0x1000>;
};
dcsr-dpaa@9000 {
compatible = "fsl,p3041-dcsr-dpaa", "fsl,dcsr-dpaa";
reg = <0x9000 0x1000>;
};
dcsr-ocn@11000 {
compatible = "fsl,p3041-dcsr-ocn", "fsl,dcsr-ocn";
reg = <0x11000 0x1000>;
};
dcsr-ddr@12000 {
compatible = "fsl,dcsr-ddr";
dev-handle = <0xb>;
reg = <0x12000 0x1000>;
};
dcsr-nal@18000 {
compatible = "fsl,p3041-dcsr-nal", "fsl,dcsr-nal";
reg = <0x18000 0x1000>;
};
dcsr-rcpm@22000 {
compatible = "fsl,p3041-dcsr-rcpm", "fsl,dcsr-rcpm";
reg = <0x22000 0x1000>;
};
dcsr-cpu-sb-proxy@40000 {
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <0xc>;
reg = <0x40000 0x1000>;
};
dcsr-cpu-sb-proxy@41000 {
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <0xd>;
reg = <0x41000 0x1000>;
};
dcsr-cpu-sb-proxy@42000 {
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <0xe>;
reg = <0x42000 0x1000>;
};
dcsr-cpu-sb-proxy@43000 {
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <0xf>;
reg = <0x43000 0x1000>;
};
};
bman-portals@ff4000000 {
ranges = <0x0 0xf 0xf4000000 0x200000>;
#address-cells = <0x1>;
#size-cells = <0x1>;
compatible = "simple-bus";
bman-portal@0 {
cell-index = <0x0>;
compatible = "fsl,bman-portal";
reg = <0x0 0x4000 0x100000 0x1000>;
interrupts = <0x69 0x2 0x0 0x0>;
};
bman-portal@4000 {
cell-index = <0x1>;
compatible = "fsl,bman-portal";
reg = <0x4000 0x4000 0x101000 0x1000>;
interrupts = <0x6b 0x2 0x0 0x0>;
};
bman-portal@8000 {
cell-index = <0x2>;
compatible = "fsl,bman-portal";
reg = <0x8000 0x4000 0x102000 0x1000>;
interrupts = <0x6d 0x2 0x0 0x0>;
};
bman-portal@c000 {
cell-index = <0x3>;
compatible = "fsl,bman-portal";
reg = <0xc000 0x4000 0x103000 0x1000>;
interrupts = <0x6f 0x2 0x0 0x0>;
};
bman-portal@10000 {
cell-index = <0x4>;
compatible = "fsl,bman-portal";
reg = <0x10000 0x4000 0x104000 0x1000>;
interrupts = <0x71 0x2 0x0 0x0>;
};
bman-portal@14000 {
cell-index = <0x5>;
compatible = "fsl,bman-portal";
reg = <0x14000 0x4000 0x105000 0x1000>;
interrupts = <0x73 0x2 0x0 0x0>;
};
bman-portal@18000 {
cell-index = <0x6>;
compatible = "fsl,bman-portal";
reg = <0x18000 0x4000 0x106000 0x1000>;
interrupts = <0x75 0x2 0x0 0x0>;
};
bman-portal@1c000 {
cell-index = <0x7>;
compatible = "fsl,bman-portal";
reg = <0x1c000 0x4000 0x107000 0x1000>;
interrupts = <0x77 0x2 0x0 0x0>;
};
bman-portal@20000 {
cell-index = <0x8>;
compatible = "fsl,bman-portal";
reg = <0x20000 0x4000 0x108000 0x1000>;
interrupts = <0x79 0x2 0x0 0x0>;
};
bman-portal@24000 {
cell-index = <0x9>;
compatible = "fsl,bman-portal";
reg = <0x24000 0x4000 0x109000 0x1000>;
interrupts = <0x7b 0x2 0x0 0x0>;
};
bman-bpids@0 {
compatible = "fsl,bpid-range";
fsl,bpid-range = <0x20 0x20>;
};
};
qman-portals@ff4200000 {
ranges = <0x0 0xf 0xf4200000 0x200000>;
#address-cells = <0x1>;
#size-cells = <0x1>;
compatible = "simple-bus";
qman-portal@0 {
cell-index = <0x0>;
compatible = "fsl,qman-portal";
reg = <0x0 0x4000 0x100000 0x1000>;
interrupts = <0x68 0x2 0x0 0x0>;
fsl,qman-channel-id = <0x0>;
};
qman-portal@4000 {
cell-index = <0x1>;
compatible = "fsl,qman-portal";
reg = <0x4000 0x4000 0x101000 0x1000>;
interrupts = <0x6a 0x2 0x0 0x0>;
fsl,qman-channel-id = <0x1>;
};
qman-portal@8000 {
cell-index = <0x2>;
compatible = "fsl,qman-portal";
reg = <0x8000 0x4000 0x102000 0x1000>;
interrupts = <0x6c 0x2 0x0 0x0>;
fsl,qman-channel-id = <0x2>;
};
qman-portal@c000 {
cell-index = <0x3>;
compatible = "fsl,qman-portal";
reg = <0xc000 0x4000 0x103000 0x1000>;
interrupts = <0x6e 0x2 0x0 0x0>;
fsl,qman-channel-id = <0x3>;
};
qman-portal@10000 {
cell-index = <0x4>;
compatible = "fsl,qman-portal";
reg = <0x10000 0x4000 0x104000 0x1000>;
interrupts = <0x70 0x2 0x0 0x0>;
fsl,qman-channel-id = <0x4>;
};
qman-portal@14000 {
cell-index = <0x5>;
compatible = "fsl,qman-portal";
reg = <0x14000 0x4000 0x105000 0x1000>;
interrupts = <0x72 0x2 0x0 0x0>;
fsl,qman-channel-id = <0x5>;
};
qman-portal@18000 {
cell-index = <0x6>;
compatible = "fsl,qman-portal";
reg = <0x18000 0x4000 0x106000 0x1000>;
interrupts = <0x74 0x2 0x0 0x0>;
fsl,qman-channel-id = <0x6>;
};
qman-portal@1c000 {
cell-index = <0x7>;
compatible = "fsl,qman-portal";
reg = <0x1c000 0x4000 0x107000 0x1000>;
interrupts = <0x76 0x2 0x0 0x0>;
fsl,qman-channel-id = <0x7>;
};
qman-portal@20000 {
cell-index = <0x8>;
compatible = "fsl,qman-portal";
reg = <0x20000 0x4000 0x108000 0x1000>;
interrupts = <0x78 0x2 0x0 0x0>;
fsl,qman-channel-id = <0x8>;
};
qman-portal@24000 {
cell-index = <0x9>;
compatible = "fsl,qman-portal";
reg = <0x24000 0x4000 0x109000 0x1000>;
interrupts = <0x7a 0x2 0x0 0x0>;
fsl,qman-channel-id = <0x9>;
};
qman-fqids@0 {
compatible = "fsl,fqid-range";
fsl,fqid-range = <0x100 0x100>;
};
qman-fqids@1 {
compatible = "fsl,fqid-range";
fsl,fqid-range = <0x8000 0x8000>;
};
qman-pools@0 {
compatible = "fsl,pool-channel-range";
fsl,pool-channel-range = <0x21 0xf>;
};
qman-cgrids@0 {
compatible = "fsl,cgrid-range";
fsl,cgrid-range = <0x0 0x100>;
};
};
soc@ffe000000 {
ranges = <0x0 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0x0 0x1000>;
#address-cells = <0x1>;
#size-cells = <0x1>;
device_type = "soc";
compatible = "simple-bus";
spi@110000 {
#address-cells = <0x1>;
#size-cells = <0x0>;
compatible = "fsl,mpc8536-espi";
reg = <0x110000 0x1000>;
interrupts = <0x35 0x2 0x0 0x0>;
fsl,espi-num-chipselects = <0x4>;
flash@0 {
#address-cells = <0x1>;
#size-cells = <0x1>;
compatible = "spansion,s25sl12801";
reg = <0x0>;
spi-max-frequency = <0x2160ec0>;
partition@u-boot {
label = "u-boot";
reg = <0x0 0x100000>;
read-only;
};
partition@kernel {
label = "kernel";
reg = <0x100000 0x500000>;
read-only;
};
partition@dtb {
label = "dtb";
reg = <0x600000 0x100000>;
read-only;
};
partition@fs {
label = "file system";
reg = <0x700000 0x900000>;
};
};
};
i2c@118100 {
#address-cells = <0x1>;
#size-cells = <0x0>;
cell-index = <0x1>;
compatible = "fsl-i2c";
reg = <0x118100 0x100>;
interrupts = <0x26 0x2 0x0 0x0>;
dfsrr;
eeprom@51 {
compatible = "at24,24c256";
reg = <0x51>;
};
eeprom@52 {
compatible = "at24,24c256";
reg = <0x52>;
};
};
i2c@119100 {
#address-cells = <0x1>;
#size-cells = <0x0>;
cell-index = <0x3>;
compatible = "fsl-i2c";
reg = <0x119100 0x100>;
interrupts = <0x27 0x2 0x0 0x0>;
dfsrr;
rtc@68 {
compatible = "dallas,ds3232";
reg = <0x68>;
interrupts = <0x1 0x1 0x0 0x0>;
};
adt7461@4c {
compatible = "adi,adt7461";
reg = <0x4c>;
};
};
fman@400000 {
#address-cells = <0x1>;
#size-cells = <0x1>;
cell-index = <0x0>;
compatible = "fsl,fman", "simple-bus";
ranges = <0x0 0x400000 0x100000>;
reg = <0x400000 0x100000>;
clock-frequency = <0x0>;
interrupts = <0x60 0x2 0x0 0x0 0x10 0x2 0x1 0x1>;
ethernet@e0000 {
tbi-handle = <0x10>;
phy-handle = <0x11>;
phy-connection-type = "sgmii";
cell-index = <0x0>;
compatible = "fsl,fman-1g-mac";
reg = <0xe0000 0x1000>;
fsl,port-handles = <0x12 0x13>;
ptimer-handle = <0x14>;
linux,phandle = <0x2f>;
phandle = <0x2f>;
};
mdio@e1120 {
#address-cells = <0x1>;
#size-cells = <0x0>;
compatible = "fsl,fman-mdio";
reg = <0xe1120 0xee0>;
interrupts = <0x64 0x1 0x0 0x0>;
linux,phandle = <0x2e>;
phandle = <0x2e>;
tbi-phy@8 {
reg = <0x8>;
device_type = "tbi-phy";
linux,phandle = <0x10>;
phandle = <0x10>;
};
};
ethernet@e2000 {
tbi-handle = <0x15>;
phy-handle = <0x16>;
phy-connection-type = "sgmii";
cell-index = <0x1>;
compatible = "fsl,fman-1g-mac";
reg = <0xe2000 0x1000>;
fsl,port-handles = <0x17 0x18>;
ptimer-handle = <0x14>;
linux,phandle = <0x30>;
phandle = <0x30>;
};
mdio@e3120 {
#address-cells = <0x1>;
#size-cells = <0x0>;
compatible = "fsl,fman-tbi";
reg = <0xe3120 0xee0>;
interrupts = <0x64 0x1 0x0 0x0>;
tbi-phy@8 {
reg = <0x8>;
device_type = "tbi-phy";
linux,phandle = <0x15>;
phandle = <0x15>;
};
};
ethernet@e4000 {
tbi-handle = <0x19>;
phy-handle = <0x1a>;
phy-connection-type = "sgmii";
cell-index = <0x2>;
compatible = "fsl,fman-1g-mac";
reg = <0xe4000 0x1000>;
fsl,port-handles = <0x1b 0x1c>;
ptimer-handle = <0x14>;
linux,phandle = <0x31>;
phandle = <0x31>;
};
mdio@e5120 {
#address-cells = <0x1>;
#size-cells = <0x0>;
compatible = "fsl,fman-tbi";
reg = <0xe5120 0xee0>;
interrupts = <0x64 0x1 0x0 0x0>;
tbi-phy@8 {
reg = <0x8>;
device_type = "tbi-phy";
linux,phandle = <0x19>;
phandle = <0x19>;
};
};
ethernet@e6000 {
tbi-handle = <0x1d>;
phy-handle = <0x1e>;
phy-connection-type = "sgmii";
cell-index = <0x3>;
compatible = "fsl,fman-1g-mac";
reg = <0xe6000 0x1000>;
fsl,port-handles = <0x1f 0x20>;
ptimer-handle = <0x14>;
linux,phandle = <0x32>;
phandle = <0x32>;
};
mdio@e7120 {
#address-cells = <0x1>;
#size-cells = <0x0>;
compatible = "fsl,fman-tbi";
reg = <0xe7120 0xee0>;
interrupts = <0x64 0x1 0x0 0x0>;
tbi-phy@8 {
reg = <0x8>;
device_type = "tbi-phy";
linux,phandle = <0x1d>;
phandle = <0x1d>;
};
};
ethernet@e8000 {
tbi-handle = <0x21>;
phy-handle = <0x22>;
phy-connection-type = "rgmii";
cell-index = <0x4>;
compatible = "fsl,fman-1g-mac";
reg = <0xe8000 0x1000>;
fsl,port-handles = <0x23 0x24>;
ptimer-handle = <0x14>;
linux,phandle = <0x33>;
phandle = <0x33>;
};
mdio@e9120 {
#address-cells = <0x1>;
#size-cells = <0x0>;
compatible = "fsl,fman-tbi";
reg = <0xe9120 0xee0>;
interrupts = <0x64 0x1 0x0 0x0>;
tbi-phy@8 {
reg = <0x8>;
device_type = "tbi-phy";
linux,phandle = <0x21>;
phandle = <0x21>;
};
};
ethernet@f0000 {
phy-handle = <0x25>;
phy-connection-type = "xgmii";
cell-index = <0x0>;
compatible = "fsl,fman-10g-mac";
reg = <0xf0000 0x1000>;
fsl,port-handles = <0x26 0x27>;
linux,phandle = <0x34>;
phandle = <0x34>;
};
mdio@f1000 {
status = "disabled";
#address-cells = <0x1>;
#size-cells = <0x0>;
compatible = "fsl,fman-xmdio";
reg = <0xf1000 0x1000>;
interrupts = <0x64 0x1 0x0 0x0>;
ethernet-phy@4 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <0x4>;
linux,phandle = <0x25>;
phandle = <0x25>;
};
ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <0x0>;
};
};
cc {
compatible = "fsl,fman-cc";
};
muram@0 {
compatible = "fsl,fman-muram";
reg = <0x0 0x28000>;
};
bmi@80000 {
compatible = "fsl,fman-bmi";
reg = <0x80000 0x400>;
};
qmi@80400 {
compatible = "fsl,fman-qmi";
reg = <0x80400 0x400>;
};
port@81000 {
cell-index = <0x0>;
compatible = "fsl,fman-port-oh";
reg = <0x81000 0x1000>;
fsl,qman-channel-id = <0x46>;
};
port@82000 {
cell-index = <0x1>;
compatible = "fsl,fman-port-oh";
reg = <0x82000 0x1000>;
fsl,qman-channel-id = <0x47>;
};
port@83000 {
cell-index = <0x2>;
compatible = "fsl,fman-port-oh";
reg = <0x83000 0x1000>;
fsl,qman-channel-id = <0x48>;
};
port@84000 {
cell-index = <0x3>;
compatible = "fsl,fman-port-oh";
reg = <0x84000 0x1000>;
fsl,qman-channel-id = <0x49>;
};
port@85000 {
cell-index = <0x4>;
compatible = "fsl,fman-port-oh";
reg = <0x85000 0x1000>;
status = "disabled";
fsl,qman-channel-id = <0x4a>;
};
port@86000 {
cell-index = <0x5>;
compatible = "fsl,fman-port-oh";
reg = <0x86000 0x1000>;
status = "disabled";
fsl,qman-channel-id = <0x4b>;
};
port@87000 {
cell-index = <0x6>;
compatible = "fsl,fman-port-oh";
reg = <0x87000 0x1000>;
status = "disabled";
};
policer@c0000 {
compatible = "fsl,fman-policer";
reg = <0xc0000 0x1000>;
};
keygen@c1000 {
compatible = "fsl,fman-keygen";
reg = <0xc1000 0x1000>;
};
dma@c2000 {
compatible = "fsl,fman-dma";
reg = <0xc2000 0x1000>;
};
fpm@c3000 {
compatible = "fsl,fman-fpm";
reg = <0xc3000 0x1000>;
};
parser@c7000 {
compatible = "fsl,fman-parser";
reg = <0xc7000 0x1000>;
};
rtc@fe000 {
compatible = "fsl,fman-rtc";
reg = <0xfe000 0x1000>;
linux,phandle = <0x14>;
phandle = <0x14>;
};
port@88000 {
cell-index = <0x0>;
compatible = "fsl,fman-port-1g-rx";
reg = <0x88000 0x1000>;
linux,phandle = <0x12>;
phandle = <0x12>;
};
port@a8000 {
cell-index = <0x0>;
compatible = "fsl,fman-port-1g-tx";
reg = <0xa8000 0x1000>;
fsl,qman-channel-id = <0x41>;
linux,phandle = <0x13>;
phandle = <0x13>;
};
port@89000 {
cell-index = <0x1>;
compatible = "fsl,fman-port-1g-rx";
reg = <0x89000 0x1000>;
linux,phandle = <0x17>;
phandle = <0x17>;
};
port@a9000 {
cell-index = <0x1>;
compatible = "fsl,fman-port-1g-tx";
reg = <0xa9000 0x1000>;
fsl,qman-channel-id = <0x42>;
linux,phandle = <0x18>;
phandle = <0x18>;
};
port@8a000 {
cell-index = <0x2>;
compatible = "fsl,fman-port-1g-rx";
reg = <0x8a000 0x1000>;
linux,phandle = <0x1b>;
phandle = <0x1b>;
};
port@aa000 {
cell-index = <0x2>;
compatible = "fsl,fman-port-1g-tx";
reg = <0xaa000 0x1000>;
fsl,qman-channel-id = <0x43>;
linux,phandle = <0x1c>;
phandle = <0x1c>;
};
port@8b000 {
cell-index = <0x3>;
compatible = "fsl,fman-port-1g-rx";
reg = <0x8b000 0x1000>;
linux,phandle = <0x1f>;
phandle = <0x1f>;
};
port@ab000 {
cell-index = <0x3>;
compatible = "fsl,fman-port-1g-tx";
reg = <0xab000 0x1000>;
fsl,qman-channel-id = <0x44>;
linux,phandle = <0x20>;
phandle = <0x20>;
};
port@8c000 {
cell-index = <0x4>;
compatible = "fsl,fman-port-1g-rx";
reg = <0x8c000 0x1000>;
linux,phandle = <0x23>;
phandle = <0x23>;
};
port@ac000 {
cell-index = <0x4>;
compatible = "fsl,fman-port-1g-tx";
reg = <0xac000 0x1000>;
fsl,qman-channel-id = <0x45>;
linux,phandle = <0x24>;
phandle = <0x24>;
};
port@90000 {
cell-index = <0x0>;
compatible = "fsl,fman-port-10g-rx";
reg = <0x90000 0x1000>;
linux,phandle = <0x26>;
phandle = <0x26>;
};
port@b0000 {
cell-index = <0x0>;
compatible = "fsl,fman-port-10g-tx";
reg = <0xb0000 0x1000>;
fsl,qman-channel-id = <0x40>;
linux,phandle = <0x27>;
phandle = <0x27>;
};
};
soc-sram-error {
compatible = "fsl,soc-sram-error";
interrupts = <0x10 0x2 0x1 0x1d>;
};
corenet-law@0 {
compatible = "fsl,corenet-law";
reg = <0x0 0x1000>;
fsl,num-laws = <0x20>;
};
memory-controller@8000 {
compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
reg = <0x8000 0x1000>;
interrupts = <0x10 0x2 0x1 0x17>;
linux,phandle = <0xb>;
phandle = <0xb>;
};
l3-cache-controller@10000 {
compatible = "fsl,p3041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
reg = <0x10000 0x1000>;
interrupts = <0x10 0x2 0x1 0x1b>;
linux,phandle = <0x4>;
phandle = <0x4>;
};
corenet-cf@18000 {
compatible = "fsl,corenet-cf";
reg = <0x18000 0x1000>;
interrupts = <0x10 0x2 0x1 0x1f>;
fsl,ccf-num-csdids = <0x20>;
fsl,ccf-num-snoopids = <0x20>;
};
iommu@20000 {
compatible = "fsl,pamu-v1.0", "fsl,pamu";
reg = <0x20000 0x4000>;
ranges = <0x0 0x20000 0x4000>;
#address-cells = <0x1>;
#size-cells = <0x1>;
interrupts = <0x18 0x2 0x0 0x0 0x10 0x2 0x1 0x1e>;
pamu@0 {
reg = <0x0 0x1000>;
fsl,primary-cache-geometry = <0x20 0x1>;
fsl,secondary-cache-geometry = <0x80 0x2>;
linux,phandle = <0x2b>;
phandle = <0x2b>;
};
pamu@1000 {
reg = <0x1000 0x1000>;
fsl,primary-cache-geometry = <0x20 0x1>;
fsl,secondary-cache-geometry = <0x80 0x2>;
linux,phandle = <0x2d>;
phandle = <0x2d>;
};
pamu@2000 {
reg = <0x2000 0x1000>;
fsl,primary-cache-geometry = <0x20 0x1>;
fsl,secondary-cache-geometry = <0x80 0x2>;
};
pamu@3000 {
reg = <0x3000 0x1000>;
fsl,primary-cache-geometry = <0x20 0x1>;
fsl,secondary-cache-geometry = <0x80 0x2>;
};
};
pic@40000 {
interrupt-controller;
#address-cells = <0x0>;
#interrupt-cells = <0x4>;
reg = <0x40000 0x40000>;
compatible = "fsl,mpic", "chrp,open-pic";
device_type = "open-pic";
clock-frequency = <0x0>;
linux,phandle = <0x1>;
phandle = <0x1>;
};
timer@41100 {
compatible = "fsl,mpic-global-timer";
reg = <0x41100 0x100 0x41300 0x4>;
interrupts = <0x0 0x0 0x3 0x0 0x1 0x0 0x3 0x0 0x2 0x0 0x3 0x0 0x3 0x0 0x3 0x0>;
};
msi@41600 {
compatible = "fsl,mpic-msi";
reg = <0x41600 0x200 0x44140 0x4>;
msi-available-ranges = <0x0 0x100>;
interrupts = <0xe0 0x0 0x0 0x0 0xe1 0x0 0x0 0x0 0xe2 0x0 0x0 0x0 0xe3 0x0 0x0 0x0 0xe4 0x0 0x0 0x0 0xe5 0x0 0x0 0x0 0xe6 0x0 0x0 0x0 0xe7 0x0 0x0 0x0>;
};
msi@41800 {
compatible = "fsl,mpic-msi";
reg = <0x41800 0x200 0x45140 0x4>;
msi-available-ranges = <0x0 0x100>;
interrupts = <0xe8 0x0 0x0 0x0 0xe9 0x0 0x0 0x0 0xea 0x0 0x0 0x0 0xeb 0x0 0x0 0x0 0xec 0x0 0x0 0x0 0xed 0x0 0x0 0x0 0xee 0x0 0x0 0x0 0xef 0x0 0x0 0x0>;
};
msi@41a00 {
compatible = "fsl,mpic-msi";
reg = <0x41a00 0x200 0x46140 0x4>;
msi-available-ranges = <0x0 0x100>;
interrupts = <0xf0 0x0 0x0 0x0 0xf1 0x0 0x0 0x0 0xf2 0x0 0x0 0x0 0xf3 0x0 0x0 0x0 0xf4 0x0 0x0 0x0 0xf5 0x0 0x0 0x0 0xf6 0x0 0x0 0x0 0xf7 0x0 0x0 0x0>;
};
timer@42100 {
compatible = "fsl,mpic-global-timer";
reg = <0x42100 0x100 0x42300 0x4>;
interrupts = <0x4 0x0 0x3 0x0 0x5 0x0 0x3 0x0 0x6 0x0 0x3 0x0 0x7 0x0 0x3 0x0>;
};
global-utilities@e0000 {
compatible = "fsl,qoriq-device-config-1.0";
reg = <0xe0000 0xe00>;
fsl,has-rstcr;
#sleep-cells = <0x1>;
fsl,liodn-bits = <0xc>;
linux,phandle = <0x2c>;
phandle = <0x2c>;
};
global-utilities@e0e00 {
compatible = "fsl,qoriq-pin-control-1.0";
reg = <0xe0e00 0x200>;
#sleep-cells = <0x2>;
};
global-utilities@e1000 {
compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0", "fixed-clock";
reg = <0xe1000 0x1000>;
clock-frequency = <0x0>;
clock-output-names = "sysclk";
#clock-cells = <0x0>;
#address-cells = <0x1>;
#size-cells = <0x0>;
linux,phandle = <0x28>;
phandle = <0x28>;
pll1@800 {
#clock-cells = <0x1>;
reg = <0x800>;
compatible = "fsl,core-pll-clock";
clocks = <0x28>;
clock-output-names = "pll0", "pll0-div2";
linux,phandle = <0x29>;
phandle = <0x29>;
};
pll1@820 {
#clock-cells = <0x1>;
reg = <0x820>;
compatible = "fsl,core-pll-clock";
clocks = <0x28>;
clock-output-names = "pll1", "pll1-div2";
linux,phandle = <0x2a>;
phandle = <0x2a>;
};
mux0@0 {
#clock-cells = <0x0>;
reg = <0x0>;
compatible = "fsl,core-mux-clock";
clocks = <0x29 0x0 0x29 0x1 0x2a 0x0 0x2a 0x1>;
clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1";
clock-output-names = "cmux0";
linux,phandle = <0x2>;
phandle = <0x2>;
};
mux1@20 {
#clock-cells = <0x0>;
reg = <0x20>;
compatible = "fsl,core-mux-clock";
clocks = <0x29 0x0 0x29 0x1 0x2a 0x0 0x2a 0x1>;
clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1";
clock-output-names = "cmux1";
linux,phandle = <0x5>;
phandle = <0x5>;
};
mux2@40 {
#clock-cells = <0x0>;
reg = <0x40>;
compatible = "fsl,core-mux-clock";
clocks = <0x29 0x0 0x29 0x1 0x2a 0x0 0x2a 0x1>;
clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1";
clock-output-names = "cmux2";
linux,phandle = <0x7>;
phandle = <0x7>;
};
mux3@60 {
#clock-cells = <0x0>;
reg = <0x60>;
compatible = "fsl,core-mux-clock";
clocks = <0x29 0x0 0x29 0x1 0x2a 0x0 0x2a 0x1>;
clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1";
clock-output-names = "cmux3";
linux,phandle = <0x9>;
phandle = <0x9>;
};
};
global-utilities@e2000 {
compatible = "fsl,qoriq-rcpm-1.0";
reg = <0xe2000 0x1000>;
#sleep-cells = <0x1>;
};
sfp@e8000 {
compatible = "fsl,p3041-sfp", "fsl,qoriq-sfp-1.0";
reg = <0xe8000 0x1000>;
};
serdes@ea000 {
compatible = "fsl,p3041-serdes";
reg = <0xea000 0x1000>;
};
dma@100300 {
#address-cells = <0x1>;
#size-cells = <0x1>;
compatible = "fsl,eloplus-dma";
reg = <0x100300 0x4>;
ranges = <0x0 0x100100 0x200>;
cell-index = <0x0>;
fsl,iommu-parent = <0x2b>;
fsl,liodn-reg = <0x2c 0x580>;
dma-channel@0 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0x0>;
interrupts = <0x1c 0x2 0x0 0x0>;
};
dma-channel@80 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <0x1>;
interrupts = <0x1d 0x2 0x0 0x0>;
};
dma-channel@100 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <0x2>;
interrupts = <0x1e 0x2 0x0 0x0>;
};
dma-channel@180 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <0x3>;
interrupts = <0x1f 0x2 0x0 0x0>;
};
};
dma@101300 {
#address-cells = <0x1>;
#size-cells = <0x1>;
compatible = "fsl,eloplus-dma";
reg = <0x101300 0x4>;
ranges = <0x0 0x101100 0x200>;
cell-index = <0x1>;
fsl,iommu-parent = <0x2b>;
fsl,liodn-reg = <0x2c 0x584>;
dma-channel@0 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0x0>;
interrupts = <0x20 0x2 0x0 0x0>;
};
dma-channel@80 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <0x1>;
interrupts = <0x21 0x2 0x0 0x0>;
};
dma-channel@100 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <0x2>;
interrupts = <0x22 0x2 0x0 0x0>;
};
dma-channel@180 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <0x3>;
interrupts = <0x23 0x2 0x0 0x0>;
};
};
sdhc@114000 {
compatible = "fsl,p3041-esdhc", "fsl,esdhc";
reg = <0x114000 0x1000>;
interrupts = <0x30 0x2 0x0 0x0>;
clock-frequency = <0x0>;
fsl,iommu-parent = <0x2d>;
fsl,liodn-reg = <0x2c 0x530>;
sdhci,auto-cmd12;
};
i2c@118000 {
#address-cells = <0x1>;
#size-cells = <0x0>;
cell-index = <0x0>;
compatible = "fsl-i2c";
reg = <0x118000 0x100>;
interrupts = <0x26 0x2 0x0 0x0>;
dfsrr;
};
i2c@119000 {
#address-cells = <0x1>;
#size-cells = <0x0>;
cell-index = <0x2>;
compatible = "fsl-i2c";
reg = <0x119000 0x100>;
interrupts = <0x27 0x2 0x0 0x0>;
dfsrr;
};
serial@11c500 {
cell-index = <0x0>;
device_type = "serial";
compatible = "fsl,ns16550", "ns16550";
reg = <0x11c500 0x100>;
clock-frequency = <0x0>;
interrupts = <0x24 0x2 0x0 0x0>;
};
serial@11c600 {
cell-index = <0x1>;
device_type = "serial";
compatible = "fsl,ns16550", "ns16550";
reg = <0x11c600 0x100>;
clock-frequency = <0x0>;
interrupts = <0x24 0x2 0x0 0x0>;
};
serial@11d500 {
cell-index = <0x2>;
device_type = "serial";
compatible = "fsl,ns16550", "ns16550";
reg = <0x11d500 0x100>;
clock-frequency = <0x0>;
interrupts = <0x25 0x2 0x0 0x0>;
};
serial@11d600 {
cell-index = <0x3>;
device_type = "serial";
compatible = "fsl,ns16550", "ns16550";
reg = <0x11d600 0x100>;
clock-frequency = <0x0>;
interrupts = <0x25 0x2 0x0 0x0>;
};
gpio@130000 {
compatible = "fsl,qoriq-gpio";
reg = <0x130000 0x1000>;
interrupts = <0x37 0x2 0x0 0x0>;
#gpio-cells = <0x2>;
gpio-controller;
};
rman@1e0000 {
compatible = "fsl,rman";
#address-cells = <0x1>;
#size-cells = <0x1>;
ranges = <0x0 0x1e0000 0x20000>;
reg = <0x1e0000 0x20000>;
interrupts = <0x10 0x2 0x1 0xb>;
fsl,qman-channels-id = <0x62 0x63>;
inbound-block@0 {
compatible = "fsl,rman-inbound-block";
reg = <0x0 0x800>;
};
global-cfg@b00 {
compatible = "fsl,rman-global-cfg";
reg = <0xb00 0x500>;
};
inbound-block@1000 {
compatible = "fsl,rman-inbound-block";
reg = <0x1000 0x800>;
};
inbound-block@2000 {
compatible = "fsl,rman-inbound-block";
reg = <0x2000 0x800>;
};
inbound-block@3000 {
compatible = "fsl,rman-inbound-block";
reg = <0x3000 0x800>;
};
};
usb@210000 {
compatible = "fsl-usb2-mph-v1.6", "fsl-usb2-mph";
reg = <0x210000 0x1000>;
#address-cells = <0x1>;
#size-cells = <0x0>;
interrupts = <0x2c 0x2 0x0 0x0>;
phy_type = "utmi";
fsl,iommu-parent = <0x2d>;
fsl,liodn-reg = <0x2c 0x520>;
port0;
};
usb@211000 {
compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
reg = <0x211000 0x1000>;
#address-cells = <0x1>;
#size-cells = <0x0>;
interrupts = <0x2d 0x2 0x0 0x0>;
fsl,iommu-parent = <0x2d>;
fsl,liodn-reg = <0x2c 0x524>;
dr_mode = "host";
phy_type = "utmi";
};
sata@220000 {
compatible = "fsl,pq-sata-v2";
reg = <0x220000 0x1000>;
interrupts = <0x44 0x2 0x0 0x0>;
fsl,iommu-parent = <0x2d>;
fsl,liodn-reg = <0x2c 0x550>;
};
sata@221000 {
compatible = "fsl,pq-sata-v2";
reg = <0x221000 0x1000>;
interrupts = <0x45 0x2 0x0 0x0>;
fsl,iommu-parent = <0x2d>;
fsl,liodn-reg = <0x2c 0x554>;
};
crypto@300000 {
compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
fsl,sec-era = <0x3>;
#address-cells = <0x1>;
#size-cells = <0x1>;
reg = <0x300000 0x10000>;
ranges = <0x0 0x300000 0x10000>;
interrupts = <0x5c 0x2 0x0 0x0>;
fsl,iommu-parent = <0x2d>;
jr@1000 {
compatible = "fsl,sec-v4.2-job-ring", "fsl,sec-v4.0-job-ring";
reg = <0x1000 0x1000>;
interrupts = <0x58 0x2 0x0 0x0>;
};
jr@2000 {
compatible = "fsl,sec-v4.2-job-ring", "fsl,sec-v4.0-job-ring";
reg = <0x2000 0x1000>;
interrupts = <0x59 0x2 0x0 0x0>;
};
jr@3000 {
compatible = "fsl,sec-v4.2-job-ring", "fsl,sec-v4.0-job-ring";
reg = <0x3000 0x1000>;
interrupts = <0x5a 0x2 0x0 0x0>;
};
jr@4000 {
compatible = "fsl,sec-v4.2-job-ring", "fsl,sec-v4.0-job-ring";
reg = <0x4000 0x1000>;
interrupts = <0x5b 0x2 0x0 0x0>;
};
rtic@6000 {
compatible = "fsl,sec-v4.2-rtic", "fsl,sec-v4.0-rtic";
#address-cells = <0x1>;
#size-cells = <0x1>;
reg = <0x6000 0x100>;
ranges = <0x0 0x6100 0xe00>;
rtic-a@0 {
compatible = "fsl,sec-v4.2-rtic-memory", "fsl,sec-v4.0-rtic-memory";
reg = <0x0 0x20 0x100 0x80>;
};
rtic-b@20 {
compatible = "fsl,sec-v4.2-rtic-memory", "fsl,sec-v4.0-rtic-memory";
reg = <0x20 0x20 0x200 0x80>;
};
rtic-c@40 {
compatible = "fsl,sec-v4.2-rtic-memory", "fsl,sec-v4.0-rtic-memory";
reg = <0x40 0x20 0x300 0x80>;
};
rtic-d@60 {
compatible = "fsl,sec-v4.2-rtic-memory", "fsl,sec-v4.0-rtic-memory";
reg = <0x60 0x20 0x500 0x80>;
};
};
};
sec_mon@314000 {
compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
reg = <0x314000 0x1000>;
interrupts = <0x5d 0x2 0x0 0x0>;
};
pme@316000 {
compatible = "fsl,pme";
reg = <0x316000 0x10000>;
interrupts = <0x10 0x2 0x1 0x5>;
};
qman@318000 {
compatible = "fsl,qman";
reg = <0x318000 0x2000>;
interrupts = <0x10 0x2 0x1 0x3>;
};
bman@31a000 {
compatible = "fsl,bman";
reg = <0x31a000 0x1000>;
interrupts = <0x10 0x2 0x1 0x2>;
};
};
rapidio@ffe0c0000 {
reg = <0xf 0xfe0c0000 0x0 0x11000>;
compatible = "fsl,srio";
interrupts = <0x10 0x2 0x1 0xb>;
#address-cells = <0x2>;
#size-cells = <0x2>;
fsl,iommu-parent = <0x2b>;
ranges;
port1 {
ranges = <0x0 0x0 0xc 0x20000000 0x0 0x10000000>;
#address-cells = <0x2>;
#size-cells = <0x2>;
cell-index = <0x1>;
fsl,liodn-reg = <0x2c 0x510>;
};
port2 {
ranges = <0x0 0x0 0xc 0x30000000 0x0 0x10000000>;
#address-cells = <0x2>;
#size-cells = <0x2>;
cell-index = <0x2>;
fsl,liodn-reg = <0x2c 0x514>;
};
};
localbus@ffe124000 {
reg = <0xf 0xfe124000 0x0 0x1000>;
ranges = <0x0 0x0 0xf 0xe8000000 0x8000000 0x2 0x0 0xf 0xffa00000 0x40000 0x3 0x0 0xf 0xffdf0000 0x8000>;
compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus";
interrupts = <0x19 0x2 0x0 0x0>;
#address-cells = <0x2>;
#size-cells = <0x1>;
flash@0,0 {
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <0x2>;
device-width = <0x2>;
};
nand@2,0 {
#address-cells = <0x1>;
#size-cells = <0x1>;
compatible = "fsl,elbc-fcm-nand";
reg = <0x2 0x0 0x40000>;
partition@0 {
label = "NAND U-Boot Image";
reg = <0x0 0x2000000>;
read-only;
};
partition@2000000 {
label = "NAND Root File System";
reg = <0x2000000 0x10000000>;
};
partition@12000000 {
label = "NAND Compressed RFS Image";
reg = <0x12000000 0x8000000>;
};
partition@1a000000 {
label = "NAND Linux Kernel Image";
reg = <0x1a000000 0x4000000>;
};
partition@1e000000 {
label = "NAND DTB Image";
reg = <0x1e000000 0x1000000>;
};
partition@1f000000 {
label = "NAND Writable User area";
reg = <0x1f000000 0x21000000>;
};
};
board-control@3,0 {
#address-cells = <0x1>;
#size-cells = <0x1>;
compatible = "fsl,p3041ds-fpga", "fsl,fpga-ngpixis";
reg = <0x3 0x0 0x30>;
ranges = <0x0 0x3 0x0 0x30>;
mdio-mux-emi1 {
compatible = "mdio-mux-mmioreg", "mdio-mux";
mdio-parent-bus = <0x2e>;
#address-cells = <0x1>;
#size-cells = <0x0>;
reg = <0x9 0x1>;
mux-mask = <0x78>;
rgmii-mdio@8 {
status = "disabled";
reg = <0x8>;
#address-cells = <0x1>;
#size-cells = <0x0>;
ethernet-phy@0 {
reg = <0x0>;
};
ethernet-phy@1 {
reg = <0x1>;
linux,phandle = <0x22>;
phandle = <0x22>;
};
};
sgmii-mdio@28 {
reg = <0x28>;
#address-cells = <0x1>;
#size-cells = <0x0>;
status = "disabled";
ethernet-phy@1c {
reg = <0x1c>;
linux,phandle = <0x11>;
phandle = <0x11>;
};
ethernet-phy@1d {
reg = <0x1d>;
linux,phandle = <0x16>;
phandle = <0x16>;
};
ethernet-phy@1e {
reg = <0x1e>;
linux,phandle = <0x1a>;
phandle = <0x1a>;
};
ethernet-phy@1f {
reg = <0x1f>;
linux,phandle = <0x1e>;
phandle = <0x1e>;
};
};
};
};
};
pcie@ffe200000 {
reg = <0xf 0xfe200000 0x0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x0 0x0 0x20000000 0x1000000 0x0 0x0 0xf 0xf8000000 0x0 0x10000>;
compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2", "fsl,qoriq-pcie";
device_type = "pci";
#size-cells = <0x2>;
#address-cells = <0x3>;
bus-range = <0x0 0xff>;
clock-frequency = <0x1fca055>;
interrupts = <0x10 0x2 0x1 0xf>;
fsl,iommu-parent = <0x2b>;
fsl,liodn-reg = <0x2c 0x500>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000 0x2000000 0x0 0xe0000000 0x0 0x20000000 0x1000000 0x0 0x0 0x1000000 0x0 0x0 0x0 0x10000>;
reg = <0x0 0x0 0x0 0x0 0x0>;
#interrupt-cells = <0x1>;
#size-cells = <0x2>;
#address-cells = <0x3>;
device_type = "pci";
interrupts = <0x10 0x2 0x1 0xf>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 0x1 0x28 0x1 0x0 0x0 0x0 0x0 0x0 0x2 0x1 0x1 0x1 0x0 0x0 0x0 0x0 0x0 0x3 0x1 0x2 0x1 0x0 0x0 0x0 0x0 0x0 0x4 0x1 0x3 0x1 0x0 0x0>;
};
};
pcie@ffe201000 {
reg = <0xf 0xfe201000 0x0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 0x1000000 0x0 0x0 0xf 0xf8010000 0x0 0x10000>;
compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2", "fsl,qoriq-pcie";
device_type = "pci";
#size-cells = <0x2>;
#address-cells = <0x3>;
bus-range = <0x0 0xff>;
clock-frequency = <0x1fca055>;
interrupts = <0x10 0x2 0x1 0xe>;
fsl,iommu-parent = <0x2b>;
fsl,liodn-reg = <0x2c 0x504>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000 0x2000000 0x0 0xe0000000 0x0 0x20000000 0x1000000 0x0 0x0 0x1000000 0x0 0x0 0x0 0x10000>;
reg = <0x0 0x0 0x0 0x0 0x0>;
#interrupt-cells = <0x1>;
#size-cells = <0x2>;
#address-cells = <0x3>;
device_type = "pci";
interrupts = <0x10 0x2 0x1 0xe>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 0x1 0x29 0x1 0x0 0x0 0x0 0x0 0x0 0x2 0x1 0x5 0x1 0x0 0x0 0x0 0x0 0x0 0x3 0x1 0x6 0x1 0x0 0x0 0x0 0x0 0x0 0x4 0x1 0x7 0x1 0x0 0x0>;
};
};
pcie@ffe202000 {
reg = <0xf 0xfe202000 0x0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000 0x1000000 0x0 0x0 0xf 0xf8020000 0x0 0x10000>;
compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2", "fsl,qoriq-pcie";
device_type = "pci";
#size-cells = <0x2>;
#address-cells = <0x3>;
bus-range = <0x0 0xff>;
clock-frequency = <0x1fca055>;
interrupts = <0x10 0x2 0x1 0xd>;
fsl,iommu-parent = <0x2b>;
fsl,liodn-reg = <0x2c 0x508>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000 0x2000000 0x0 0xe0000000 0x0 0x20000000 0x1000000 0x0 0x0 0x1000000 0x0 0x0 0x0 0x10000>;
reg = <0x0 0x0 0x0 0x0 0x0>;
#interrupt-cells = <0x1>;
#size-cells = <0x2>;
#address-cells = <0x3>;
device_type = "pci";
interrupts = <0x10 0x2 0x1 0xd>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 0x1 0x2a 0x1 0x0 0x0 0x0 0x0 0x0 0x2 0x1 0x9 0x1 0x0 0x0 0x0 0x0 0x0 0x3 0x1 0xa 0x1 0x0 0x0 0x0 0x0 0x0 0x4 0x1 0xb 0x1 0x0 0x0>;
};
};
pcie@ffe203000 {
reg = <0xf 0xfe203000 0x0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x60000000 0x0 0x20000000 0x1000000 0x0 0x0 0xf 0xf8030000 0x0 0x10000>;
compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2", "fsl,qoriq-pcie";
device_type = "pci";
#size-cells = <0x2>;
#address-cells = <0x3>;
bus-range = <0x0 0xff>;
clock-frequency = <0x1fca055>;
interrupts = <0x10 0x2 0x1 0xc>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000 0x2000000 0x0 0xe0000000 0x0 0x20000000 0x1000000 0x0 0x0 0x1000000 0x0 0x0 0x0 0x10000>;
reg = <0x0 0x0 0x0 0x0 0x0>;
#interrupt-cells = <0x1>;
#size-cells = <0x2>;
#address-cells = <0x3>;
device_type = "pci";
interrupts = <0x10 0x2 0x1 0xc>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 0x1 0x2b 0x1 0x0 0x0 0x0 0x0 0x0 0x2 0x1 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x3 0x1 0x4 0x1 0x0 0x0 0x0 0x0 0x0 0x4 0x1 0x8 0x1 0x0 0x0>;
};
};
fsl,dpaa {
compatible = "fsl,p3041-dpaa", "fsl,dpaa";
ethernet@0 {
compatible = "fsl,p3041-dpa-ethernet", "fsl,dpa-ethernet";
fsl,fman-mac = <0x2f>;
};
ethernet@1 {
compatible = "fsl,p3041-dpa-ethernet", "fsl,dpa-ethernet";
fsl,fman-mac = <0x30>;
};
ethernet@2 {
compatible = "fsl,p3041-dpa-ethernet", "fsl,dpa-ethernet";
fsl,fman-mac = <0x31>;
status = "disabled";
};
ethernet@3 {
compatible = "fsl,p3041-dpa-ethernet", "fsl,dpa-ethernet";
fsl,fman-mac = <0x32>;
};
ethernet@4 {
compatible = "fsl,p3041-dpa-ethernet", "fsl,dpa-ethernet";
fsl,fman-mac = <0x33>;
};
ethernet@5 {
compatible = "fsl,p3041-dpa-ethernet", "fsl,dpa-ethernet";
fsl,fman-mac = <0x34>;
};
};
};
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Qoriq p3041ds no ethernet interface probed
2013-08-02 11:24 Qoriq p3041ds no ethernet interface probed Mercier Ivan
@ 2013-08-05 9:32 ` Luo Zhenhua-B19537
2013-08-05 13:44 ` Mercier Ivan
0 siblings, 1 reply; 8+ messages in thread
From: Luo Zhenhua-B19537 @ 2013-08-05 9:32 UTC (permalink / raw)
To: Mercier Ivan; +Cc: meta-freescale
[-- Attachment #1: Type: text/plain, Size: 1777 bytes --]
Hi Ivan,
Please check if the ifconfig is provided by net-tools, I recall the issue is caused by ifconfig provided by other package(I don't recall the exact package name).
Can you please try the images built by SDK 1.4(uImage, dtb, rootfs...)? Those images are verified to be working.
Best Regards,
Zhenhua
From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-bounces@yoctoproject.org] On Behalf Of Mercier Ivan
Sent: Friday, August 02, 2013 7:24 PM
To: meta-freescale@yoctoproject.org
Subject: [meta-freescale] Qoriq p3041ds no ethernet interface probed
Hi everybody,
I'm trying to make my 1G ethernet working on freescale p3041ds board.
It works on U-boot but still doesn't work in Linux....
here is my conf:
gcc version 4.6.3 20120301 (Wed Dec 5 19:16:53 CST 2012 build.sh rev=777 s=F463 -i /pkg/fs-DTgnu- ELe500mc -V release-CDE-r777_eabi_F463_ELe500mc) (GCC)
Linux p3041ds 3.8.13-rt9 from git://git.freescale.com/ppc/sdk/linux.git<http://git.freescale.com/ppc/sdk/linux.git>
device tree from arch/powerpc/boot/dts/p3041ds.dts
root file system builded with yocto from freescale sdk 1.4
On boot,
I can see my ethernet interface probed
Freescale FM module (Aug 2 2013:10:34:14), FMD API version 21.1.0
Freescale FM Ports module (Aug 2 2013:10:34:14)
dpaa_debugfs: FSL DPAA Ethernet debugfs entries ()
fsl_mac: mac.c:417:mac_load() fsl_mac: FSL FMan MAC API based driver ()
fsl_mac ffe4e0000.ethernet: FMan dTSEC version: 0x08240101
fsl_mac ffe4e0000.ethernet: FMan MAC address: 00:11:55:77:88:99
but
#ifconfig -a returns only loopback interface.
Does anybody know where this problem could be from?
device tree?uboot conf?linux conf?
Many thanks
attached: my device tree source and linux .config
[-- Attachment #2: Type: text/html, Size: 7565 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Qoriq p3041ds no ethernet interface probed
2013-08-05 9:32 ` Luo Zhenhua-B19537
@ 2013-08-05 13:44 ` Mercier Ivan
2013-08-05 14:03 ` Mercier Ivan
0 siblings, 1 reply; 8+ messages in thread
From: Mercier Ivan @ 2013-08-05 13:44 UTC (permalink / raw)
To: Luo Zhenhua-B19537; +Cc: meta-freescale
[-- Attachment #1: Type: text/plain, Size: 2473 bytes --]
Hi,
both "ifconfig.net-tools -a" and "ifconfig.inetutils -a" give only loopback
and tunnel interfaces...
I have the same problem with the last official image from
QorIQ-SDK-V1.4-PPCE500MC-IMAGE-20130625-yocto.iso
with uImage--3.8-r14.3-p3041ds-20130802074721.bin and
uImage--3.8-r14.3-p3041ds-20130802074721.bin
something else to try?
thank you
2013/8/5 Luo Zhenhua-B19537 <B19537@freescale.com>
> Hi Ivan, ****
>
> ** **
>
> Please check if the ifconfig is provided by net-tools, I recall the issue
> is caused by ifconfig provided by other package(I don’t recall the exact
> package name).****
>
> ** **
>
> Can you please try the images built by SDK 1.4(uImage, dtb, rootfs…)?
> Those images are verified to be working. ****
>
> ** **
>
> ** **
>
> Best Regards,****
>
> ** **
>
> Zhenhua****
>
> ** **
>
> *From:* meta-freescale-bounces@yoctoproject.org [mailto:
> meta-freescale-bounces@yoctoproject.org] *On Behalf Of *Mercier Ivan
> *Sent:* Friday, August 02, 2013 7:24 PM
> *To:* meta-freescale@yoctoproject.org
> *Subject:* [meta-freescale] Qoriq p3041ds no ethernet interface probed****
>
> ** **
>
> Hi everybody,****
>
> I'm trying to make my 1G ethernet working on freescale p3041ds board.****
>
> It works on U-boot but still doesn't work in Linux....****
>
> here is my conf:
>
> gcc version 4.6.3 20120301 (Wed Dec 5 19:16:53 CST 2012 build.sh
> rev=777 s=F463 -i /pkg/fs-DTgnu- ELe500mc -V
> release-CDE-r777_eabi_F463_ELe500mc) (GCC)
>
> Linux p3041ds 3.8.13-rt9 from git://git.freescale.com/ppc/sdk/linux.git***
> *
>
> device tree from arch/powerpc/boot/dts/p3041ds.dts****
>
> root file system builded with yocto from freescale sdk 1.4****
>
> On boot,****
>
> I can see my ethernet interface probed
>
> Freescale FM module (Aug 2 2013:10:34:14), FMD API version 21.1.0
> Freescale FM Ports module (Aug 2 2013:10:34:14)
> dpaa_debugfs: FSL DPAA Ethernet debugfs entries ()
> fsl_mac: mac.c:417:mac_load() fsl_mac: FSL FMan MAC API based driver ()
> fsl_mac ffe4e0000.ethernet: FMan dTSEC version: 0x08240101
> fsl_mac ffe4e0000.ethernet: FMan MAC address: 00:11:55:77:88:99****
>
> but****
>
> #ifconfig -a returns only loopback interface.****
>
> Does anybody know where this problem could be from?
> device tree?uboot conf?linux conf?****
>
> Many thanks****
>
> ** **
>
> attached: my device tree source and linux .config****
>
> ** **
>
[-- Attachment #2: Type: text/html, Size: 7688 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Qoriq p3041ds no ethernet interface probed
2013-08-05 13:44 ` Mercier Ivan
@ 2013-08-05 14:03 ` Mercier Ivan
2013-08-06 6:19 ` Luo Zhenhua-B19537
0 siblings, 1 reply; 8+ messages in thread
From: Mercier Ivan @ 2013-08-05 14:03 UTC (permalink / raw)
To: Luo Zhenhua-B19537; +Cc: meta-freescale
[-- Attachment #1: Type: text/plain, Size: 2816 bytes --]
I also tried with
uImage--3.8-r15.2-p3041ds-20130615080429.bin
uImage--3.8-r15.2-p3041ds-20130615080429.dtb
fsl-image-core-p3041ds-20130615090034.rootfs.ext2.gz.u-boot
2013/8/5 Mercier Ivan <ivan.mercier@gmail.com>
> Hi,
> both "ifconfig.net-tools -a" and "ifconfig.inetutils -a" give only
> loopback and tunnel interfaces...
> I have the same problem with the last official image from
> QorIQ-SDK-V1.4-PPCE500MC-IMAGE-20130625-yocto.iso
> with uImage--3.8-r14.3-p3041ds-20130802074721.bin and
> uImage--3.8-r14.3-p3041ds-20130802074721.bin
>
> something else to try?
>
> thank you
>
>
>
> 2013/8/5 Luo Zhenhua-B19537 <B19537@freescale.com>
>
>> Hi Ivan, ****
>>
>> ** **
>>
>> Please check if the ifconfig is provided by net-tools, I recall the issue
>> is caused by ifconfig provided by other package(I don’t recall the exact
>> package name).****
>>
>> ** **
>>
>> Can you please try the images built by SDK 1.4(uImage, dtb, rootfs…)?
>> Those images are verified to be working. ****
>>
>> ** **
>>
>> ** **
>>
>> Best Regards,****
>>
>> ** **
>>
>> Zhenhua****
>>
>> ** **
>>
>> *From:* meta-freescale-bounces@yoctoproject.org [mailto:
>> meta-freescale-bounces@yoctoproject.org] *On Behalf Of *Mercier Ivan
>> *Sent:* Friday, August 02, 2013 7:24 PM
>> *To:* meta-freescale@yoctoproject.org
>> *Subject:* [meta-freescale] Qoriq p3041ds no ethernet interface probed***
>> *
>>
>> ** **
>>
>> Hi everybody,****
>>
>> I'm trying to make my 1G ethernet working on freescale p3041ds board.****
>>
>> It works on U-boot but still doesn't work in Linux....****
>>
>> here is my conf:
>>
>> gcc version 4.6.3 20120301 (Wed Dec 5 19:16:53 CST 2012 build.sh
>> rev=777 s=F463 -i /pkg/fs-DTgnu- ELe500mc -V
>> release-CDE-r777_eabi_F463_ELe500mc) (GCC)
>>
>> Linux p3041ds 3.8.13-rt9 from git://git.freescale.com/ppc/sdk/linux.git**
>> **
>>
>> device tree from arch/powerpc/boot/dts/p3041ds.dts****
>>
>> root file system builded with yocto from freescale sdk 1.4****
>>
>> On boot,****
>>
>> I can see my ethernet interface probed
>>
>> Freescale FM module (Aug 2 2013:10:34:14), FMD API version 21.1.0
>> Freescale FM Ports module (Aug 2 2013:10:34:14)
>> dpaa_debugfs: FSL DPAA Ethernet debugfs entries ()
>> fsl_mac: mac.c:417:mac_load() fsl_mac: FSL FMan MAC API based driver ()
>> fsl_mac ffe4e0000.ethernet: FMan dTSEC version: 0x08240101
>> fsl_mac ffe4e0000.ethernet: FMan MAC address: 00:11:55:77:88:99****
>>
>> but****
>>
>> #ifconfig -a returns only loopback interface.****
>>
>> Does anybody know where this problem could be from?
>> device tree?uboot conf?linux conf?****
>>
>> Many thanks****
>>
>> ** **
>>
>> attached: my device tree source and linux .config****
>>
>> ** **
>>
>
>
[-- Attachment #2: Type: text/html, Size: 8394 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Qoriq p3041ds no ethernet interface probed
2013-08-05 14:03 ` Mercier Ivan
@ 2013-08-06 6:19 ` Luo Zhenhua-B19537
2013-08-06 9:49 ` Mercier Ivan
0 siblings, 1 reply; 8+ messages in thread
From: Luo Zhenhua-B19537 @ 2013-08-06 6:19 UTC (permalink / raw)
To: Mercier Ivan; +Cc: meta-freescale
[-- Attachment #1: Type: text/plain, Size: 3015 bytes --]
Ivan,
Please make sure you are using the right fman-ucode version(see your silicon version), if is helpful if you can send your full boot logs.
Best Regards,
Zhenhua
From: Mercier Ivan [mailto:ivan.mercier@gmail.com]
Sent: Monday, August 05, 2013 10:03 PM
To: Luo Zhenhua-B19537
Cc: meta-freescale@yoctoproject.org
Subject: Re: [meta-freescale] Qoriq p3041ds no ethernet interface probed
I also tried with
uImage--3.8-r15.2-p3041ds-20130615080429.bin
uImage--3.8-r15.2-p3041ds-20130615080429.dtb
fsl-image-core-p3041ds-20130615090034.rootfs.ext2.gz.u-boot
2013/8/5 Mercier Ivan <ivan.mercier@gmail.com<mailto:ivan.mercier@gmail.com>>
Hi,
both "ifconfig.net-tools -a" and "ifconfig.inetutils -a" give only loopback and tunnel interfaces...
I have the same problem with the last official image from QorIQ-SDK-V1.4-PPCE500MC-IMAGE-20130625-yocto.iso
with uImage--3.8-r14.3-p3041ds-20130802074721.bin and uImage--3.8-r14.3-p3041ds-20130802074721.bin
something else to try?
thank you
2013/8/5 Luo Zhenhua-B19537 <B19537@freescale.com<mailto:B19537@freescale.com>>
Hi Ivan,
Please check if the ifconfig is provided by net-tools, I recall the issue is caused by ifconfig provided by other package(I don't recall the exact package name).
Can you please try the images built by SDK 1.4(uImage, dtb, rootfs...)? Those images are verified to be working.
Best Regards,
Zhenhua
From: meta-freescale-bounces@yoctoproject.org<mailto:meta-freescale-bounces@yoctoproject.org> [mailto:meta-freescale-bounces@yoctoproject.org<mailto:meta-freescale-bounces@yoctoproject.org>] On Behalf Of Mercier Ivan
Sent: Friday, August 02, 2013 7:24 PM
To: meta-freescale@yoctoproject.org<mailto:meta-freescale@yoctoproject.org>
Subject: [meta-freescale] Qoriq p3041ds no ethernet interface probed
Hi everybody,
I'm trying to make my 1G ethernet working on freescale p3041ds board.
It works on U-boot but still doesn't work in Linux....
here is my conf:
gcc version 4.6.3 20120301 (Wed Dec 5 19:16:53 CST 2012 build.sh rev=777 s=F463 -i /pkg/fs-DTgnu- ELe500mc -V release-CDE-r777_eabi_F463_ELe500mc) (GCC)
Linux p3041ds 3.8.13-rt9 from git://git.freescale.com/ppc/sdk/linux.git<http://git.freescale.com/ppc/sdk/linux.git>
device tree from arch/powerpc/boot/dts/p3041ds.dts
root file system builded with yocto from freescale sdk 1.4
On boot,
I can see my ethernet interface probed
Freescale FM module (Aug 2 2013:10:34:14), FMD API version 21.1.0
Freescale FM Ports module (Aug 2 2013:10:34:14)
dpaa_debugfs: FSL DPAA Ethernet debugfs entries ()
fsl_mac: mac.c:417:mac_load() fsl_mac: FSL FMan MAC API based driver ()
fsl_mac ffe4e0000.ethernet: FMan dTSEC version: 0x08240101
fsl_mac ffe4e0000.ethernet: FMan MAC address: 00:11:55:77:88:99
but
#ifconfig -a returns only loopback interface.
Does anybody know where this problem could be from?
device tree?uboot conf?linux conf?
Many thanks
attached: my device tree source and linux .config
[-- Attachment #2: Type: text/html, Size: 13646 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Qoriq p3041ds no ethernet interface probed
2013-08-06 6:19 ` Luo Zhenhua-B19537
@ 2013-08-06 9:49 ` Mercier Ivan
2013-08-07 6:43 ` Luo Zhenhua-B19537
0 siblings, 1 reply; 8+ messages in thread
From: Mercier Ivan @ 2013-08-06 9:49 UTC (permalink / raw)
To: Luo Zhenhua-B19537; +Cc: meta-freescale
[-- Attachment #1.1: Type: text/plain, Size: 3622 bytes --]
yeah I'm using the right fman I think
CPU0: P3041E, Version: 1.1, (0x82190311)
fsl_fman_ucode_p3041_r1.1_106_1_9.bin
atached the linux boot log
thanks for your help
2013/8/6 Luo Zhenhua-B19537 <B19537@freescale.com>
> Ivan, ****
>
> ** **
>
> Please make sure you are using the right fman-ucode version(see your
> silicon version), if is helpful if you can send your full boot logs. ****
>
> ** **
>
> ** **
>
> Best Regards,****
>
> ** **
>
> Zhenhua****
>
> ** **
>
> *From:* Mercier Ivan [mailto:ivan.mercier@gmail.com]
> *Sent:* Monday, August 05, 2013 10:03 PM
> *To:* Luo Zhenhua-B19537
> *Cc:* meta-freescale@yoctoproject.org
> *Subject:* Re: [meta-freescale] Qoriq p3041ds no ethernet interface probed
> ****
>
> ** **
>
> I also tried with
> uImage--3.8-r15.2-p3041ds-20130615080429.bin
> uImage--3.8-r15.2-p3041ds-20130615080429.dtb
> fsl-image-core-p3041ds-20130615090034.rootfs.ext2.gz.u-boot****
>
> ** **
>
> 2013/8/5 Mercier Ivan <ivan.mercier@gmail.com>****
>
> Hi,****
>
> both "ifconfig.net-tools -a" and "ifconfig.inetutils -a" give only
> loopback and tunnel interfaces...****
>
> I have the same problem with the last official image from
> QorIQ-SDK-V1.4-PPCE500MC-IMAGE-20130625-yocto.iso****
>
> with uImage--3.8-r14.3-p3041ds-20130802074721.bin and
> uImage--3.8-r14.3-p3041ds-20130802074721.bin ****
>
> something else to try?****
>
> thank you****
>
> ** **
>
> ** **
>
> 2013/8/5 Luo Zhenhua-B19537 <B19537@freescale.com>****
>
> Hi Ivan, ****
>
> ****
>
> Please check if the ifconfig is provided by net-tools, I recall the issue
> is caused by ifconfig provided by other package(I don’t recall the exact
> package name).****
>
> ****
>
> Can you please try the images built by SDK 1.4(uImage, dtb, rootfs…)?
> Those images are verified to be working. ****
>
> ****
>
> ****
>
> Best Regards,****
>
> ****
>
> Zhenhua****
>
> ****
>
> *From:* meta-freescale-bounces@yoctoproject.org [mailto:
> meta-freescale-bounces@yoctoproject.org] *On Behalf Of *Mercier Ivan
> *Sent:* Friday, August 02, 2013 7:24 PM
> *To:* meta-freescale@yoctoproject.org
> *Subject:* [meta-freescale] Qoriq p3041ds no ethernet interface probed****
>
> ****
>
> Hi everybody,****
>
> I'm trying to make my 1G ethernet working on freescale p3041ds board.****
>
> It works on U-boot but still doesn't work in Linux....****
>
> here is my conf:
>
> gcc version 4.6.3 20120301 (Wed Dec 5 19:16:53 CST 2012 build.sh
> rev=777 s=F463 -i /pkg/fs-DTgnu- ELe500mc -V
> release-CDE-r777_eabi_F463_ELe500mc) (GCC)
>
> Linux p3041ds 3.8.13-rt9 from git://git.freescale.com/ppc/sdk/linux.git***
> *
>
> device tree from arch/powerpc/boot/dts/p3041ds.dts****
>
> root file system builded with yocto from freescale sdk 1.4****
>
> On boot,****
>
> I can see my ethernet interface probed
>
> Freescale FM module (Aug 2 2013:10:34:14), FMD API version 21.1.0
> Freescale FM Ports module (Aug 2 2013:10:34:14)
> dpaa_debugfs: FSL DPAA Ethernet debugfs entries ()
> fsl_mac: mac.c:417:mac_load() fsl_mac: FSL FMan MAC API based driver ()
> fsl_mac ffe4e0000.ethernet: FMan dTSEC version: 0x08240101
> fsl_mac ffe4e0000.ethernet: FMan MAC address: 00:11:55:77:88:99****
>
> but****
>
> #ifconfig -a returns only loopback interface.****
>
> Does anybody know where this problem could be from?
> device tree?uboot conf?linux conf?****
>
> Many thanks****
>
> ****
>
> attached: my device tree source and linux .config****
>
> ****
>
> ** **
>
> ** **
>
[-- Attachment #1.2: Type: text/html, Size: 11712 bytes --]
[-- Attachment #2: boot#3.log --]
[-- Type: application/octet-stream, Size: 13869 bytes --]
## Booting kernel from Legacy Image at 10000000 ...
Image Name: Linux-3.8.13-rt9-wp6-04555-gb075
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 3460442 Bytes = 3.3 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 20000000 ...
Image Name: fsl-image-core-p3041ds-201306150
Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
Data Size: 26531653 Bytes = 25.3 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 00c00000
Booting using the fdt blob at 0x00c00000
Uncompressing Kernel Image ... OK
Loading Ramdisk to 2e6b2000, end 2ffff745 ... OK
Loading Device Tree to 03fe4000, end 03fff1b1 ... OK
Using P3041 DS machine description
Memory CAM mapping: 256/256/256 Mb, residual: 256Mb
Linux version 3.8.13-rt9-wp6-04555-gb075d90 (ime@i5) (gcc version 4.6.3 20120301 (Wed Dec 5 19:16:53 CST 2012 build.sh rev=777 s=F463 -i /pkg/fs-DTgnu- ELe500mc -V release-CDE-3
Found initrd at 0xee6b2000:0xeffff745
No /soc@ffe000000/qman@318000 property 'fsl,qman-fqd', using memblock_alloc(0000000000400000)
No /soc@ffe000000/qman@318000 property 'fsl,qman-pfdr', using memblock_alloc(0000000002000000)
Qman ver:0a01,01,02
No /soc@ffe000000/bman@31a000 property 'fsl,bman-fbpr', using memblock_alloc(0000000001000000)
Bman ver:0a02,01,00
pme: No /soc@ffe000000/pme@316000 property 'fsl,pme-pdsr', using memblock_alloc(0x0000000001000000)
pme: No /soc@ffe000000/pme@316000 property 'fsl,pme-sre', using memblock_alloc(0x0000000000a00000)
No USDPAA memory, no 'usdpaa_mem' bootarg
CPU maps initialized for 1 thread per core
bootconsole [udbg0] enabled
setup_arch: bootmem
P3041 DS board from Freescale Semiconductor
arch: exit
Zone ranges:
DMA [mem 0x00000000-0x2fffffff]
Normal empty
HighMem [mem 0x30000000-0x3fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00000000-0x3fffffff]
MMU: Allocated 1088 bytes of context maps for 255 contexts
PERCPU: Embedded 10 pages/cpu @c0f9a000 s17216 r8192 d15552 u40960
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
Kernel command line:
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 859604k/1048576k available (7136k kernel code, 188972k reserved, 200k data, 408k bss, 264k init)
Kernel virtual memory layout:
* 0xfff5f000..0xfffff000 : fixmap
* 0xffc00000..0xffe00000 : highmem PTEs
* 0xffbfa000..0xffc00000 : early ioremap
* 0xf1000000..0xffbfa000 : vmalloc & ioremap
Hierarchical RCU implementation.
RCU debugfs-based tracing is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
NR_IRQS:512 nr_irqs:512 16
mpic: Setting up MPIC " OpenPIC " version 1.2 at ffe040000, max 4 CPUs
mpic: ISU size: 512, shift: 9, mask: 1ff
mpic: Initializing for 512 sources
clocksource: timebase mult[2aaaaaab] shift[24] registered
Console: colour dummy device 80x25
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
mpic: requesting IPIs...
e500 family performance monitor hardware support registered
Brought up 4 CPUs
devtmpfs: initialized
NET: Registered protocol family 16
Found FSL PCI host bridge at 0x0000000ffe201000. Firmware bus number: 0->0
PCI host bridge /pcie@ffe201000 ranges:
MEM 0x0000000c20000000..0x0000000c3fffffff -> 0x00000000e0000000
IO 0x0000000ff8010000..0x0000000ff801ffff -> 0x0000000000000000
/pcie@ffe201000: PCICSRBAR @ 0xdf000000
PCI: Probing PCI hardware
fsl-pci ffe201000.pcie: PCI host bridge to bus 0001:00
pci_bus 0001:00: root bus resource [io 0xf1040000-0xf104ffff] (bus address [0x0000-0xffff])
pci_bus 0001:00: root bus resource [mem 0xc20000000-0xc3fffffff] (bus address [0xe0000000-0xffffffff])
pci_bus 0001:00: root bus resource [bus 00-ff]
pci 0001:00:00.0: ignoring class 0x0b2000 (doesn't match header type 01)
pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0001:00:00.0: PCI bridge to [bus 01-ff]
pci 0001:00:00.0: PCI bridge to [bus 01]
pci 0001:00:00.0: bridge window [io 0xf1040000-0xf104ffff]
pci 0001:00:00.0: bridge window [mem 0xc20000000-0xc3fffffff]
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
Bman err interrupt handler present
Bman portal initialised, cpu 0
Bman portal initialised, cpu 1
Bman portal initialised, cpu 2
Bman portal initialised, cpu 3
Bman portals initialised
Bman: BPID allocator includes range 32:32
Qman err interrupt handler present
Qman portal initialised, cpu 0
Qman portal initialised, cpu 1
Qman portal initialised, cpu 2
Qman portal initialised, cpu 3
Qman portals initialised
Qman: FQID allocator includes range 256:256
Qman: FQID allocator includes range 32768:32768
Qman: CGRID allocator includes range 0:256
Qman: pool channel allocator includes range 33:15
Switching to clocksource timebase
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 25912k freed
fsl-rcpm ffe0e2000.global-utilities: Freescale RCPM driver
audit: initializing netlink socket (disabled)
type=2000 audit(0.340:1): initialized
bounce pool size: 64 pages
HugeTLB registered 1 MB page size, pre-allocated 0 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
HugeTLB registered 16 MB page size, pre-allocated 0 pages
HugeTLB registered 64 MB page size, pre-allocated 0 pages
HugeTLB registered 256 MB page size, pre-allocated 0 pages
HugeTLB registered 1 GB page size, pre-allocated 0 pages
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
msgmni has been set to 1346
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250.0: ttyS0 at MMIO 0xffe11c500 (irq = 36) is a 16550A
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
serial8250.0: ttyS1 at MMIO 0xffe11c600 (irq = 36) is a 16550A
serial8250.0: ttyS2 at MMIO 0xffe11d500 (irq = 37) is a 16550A
serial8250.0: ttyS3 at MMIO 0xffe11d600 (irq = 37) is a 16550A
ePAPR hypervisor byte channel driver
Generic non-volatile memory driver v1.1
brd: module loaded
loop: module loaded
st: Version 20101219, fixed bufsize 32768, s/g segs 256
fsl-sata ffe220000.sata: Sata FSL Platform/CSB Driver init
scsi0 : sata_fsl
ata1: SATA max UDMA/133 irq 68
fsl-sata ffe221000.sata: Sata FSL Platform/CSB Driver init
scsi1 : sata_fsl
ata2: SATA max UDMA/133 irq 69
fsl_espi ffe110000.spi: master is unqueued, this is deprecated
fsl_espi ffe110000.spi: at 0xf1100000 (irq = 53)
mdio-mux-mmioreg fffdf0009.mdio-mux-emi1: failed to register mdio-mux bus /localbus@ffe124000/board-control@3,0/mdio-mux-emi1
platform fffdf0009.mdio-mux-emi1: Driver mdio-mux-mmioreg requests probe deferral
libphy: Freescale XGMAC MDIO Bus: probed
mdio_bus ffe4f1000: MDIO read error
mdio_bus ffe4f1000: MDIO read error
mdio_bus ffe4f1000: MDIO read error
mdio_bus ffe4f1000: MDIO read error
FMAN(0) Fifo size settings:
- Total buffers available(512 - 256B/buffer)
- Total throughput(11Gbps)
- Max frame size(1522B)
- 1G ports TX 1(12 bufs set (min: 12))
- 1G ports RX 1(38 bufs set (min: 14))
- 10G ports TX 1(18 bufs set (min: 18))
- 10G ports RX 1(380 bufs set (min: 14))
- OH-HC ports 4(8)
- Shared extra buffers(32)
FMAN(0) open dma settings:
- Total open dma available(32)
- 1G ports TX 1(6)
- 1G ports RX 1(6)
- 10G ports TX 1(8)
- 10G ports RX 1(8)
- OH-HC ports 4(1)
- Shared extra open dma(0)
FMAN(0) Tnums settings:
- Total Tnums available(128)
- 1G ports TX 1(22)
- 1G ports RX 1(22)
- 10G ports TX 1(34)
- 10G ports RX 1(34)
- OH-HC ports 4(2)
- Shared extra tnums(8)
Freescale FM module (Aug 2 2013:14:26:09), FMD API version 21.1.0
Freescale FM Ports module (Aug 2 2013:14:26:10)
fmt (cpu:0): FSL FM test module loaded.
dpaa_debugfs: FSL DPAA Ethernet debugfs entries ()
fsl_mac: mac.c:417:mac_load() fsl_mac: FSL FMan MAC API based driver ()
fsl_mac ffe4e0000.ethernet: FMan dTSEC version: 0x08240101
fsl_mac ffe4e0000.ethernet: FMan MAC address: 00:11:22:33:44:55
fsl_mac ffe4e6000.ethernet: of_get_mac_address(/soc@ffe000000/fman@400000/ethernet@e6000) failed
fsl_mac: probe of ffe4e6000.ethernet failed with error -22
fsl_mac ffe4f0000.ethernet: of_get_mac_address(/soc@ffe000000/fman@400000/ethernet@f0000) failed
fsl_mac: probe of ffe4f0000.ethernet failed with error -22
fsl_dpa: dpaa_eth.c:4304:dpa_load() fsl_dpa: FSL DPAA Ethernet driver ()
fsl_dpa ethernet.14: dev_get_drvdata(ffe4e6000.ethernet) failed
fsl_dpa: probe of ethernet.14 failed with error -22
fsl_dpa ethernet.15: dev_get_drvdata(ffe4f0000.ethernet) failed
fsl_dpa: probe of ethernet.15 failed with error -22
fsl_oh: offline_port.c:439:oh_port_load() fsl_oh: FSL FMan Offline Parsing port driver ()
rtc-test rtc-test.0: rtc core: registered test as rtc0
rtc-test rtc-test.1: rtc core: registered test as rtc1
i2c /dev entries driver
mpc-i2c ffe118100.i2c: timeout 1000000 us
mpc-i2c ffe119100.i2c: timeout 1000000 us
mpc-i2c ffe118000.i2c: timeout 1000000 us
mpc-i2c ffe119000.i2c: timeout 1000000 us
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on ffe114000.sdhc [ffe114000.sdhc] using ADMA
Freescale USDPAA process driver
fsl-usdpaa: no region found
Freescale USDPAA process IRQ driver
fsl-pme ffe316000.pme: ver: 0x00100201
Freescale pme2 db driver
Freescale pme2 scan driver
fsl-pme2-scan: device pme_scan registered
IPv4 over IPv4 tunneling driver
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
mdio-mux-mmioreg fffdf0009.mdio-mux-emi1: failed to register mdio-mux bus /localbus@ffe124000/board-control@3,0/mdio-mux-emi1
platform fffdf0009.mdio-mux-emi1: Driver mdio-mux-mmioreg requests probe deferral
rtc-test rtc-test.0: setting system clock to 1970-01-01 00:00:00 UTC (0)
mmc0: new high speed SDHC card at address aaaa
mmcblk0: mmc0:aaaa SU32G 29.7 GiB
mmcblk0: p1
mdio-mux-mmioreg fffdf0009.mdio-mux-emi1: failed to register mdio-mux bus /localbus@ffe124000/board-control@3,0/mdio-mux-emi1
platform fffdf0009.mdio-mux-emi1: Driver mdio-mux-mmioreg requests probe deferral
ata1: No Device OR PHYRDY change,Hstatus = 0xa0000000
ata1: SATA link down (SStatus 0 SControl 300)
ata2: No Device OR PHYRDY change,Hstatus = 0xa0000000
ata2: SATA link down (SStatus 0 SControl 300)
RAMDISK: gzip image found at block 0
VFS: Mounted root (ext2 filesystem) readonly on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 264k freed
INIT: version 2.88 booting
/etc/init.d/rcS: line 27: /etc/hostname: Read-only file system
Starting udev
udevd[725]: starting version 182
Starting Bootlog daemon: bootlogd: cannot allocate pseudo tty: No such file or directory
bootlogd.
Configuring network interfaces... done.
net.ipv4.conf.default.rp_filter = 0
net.ipv4.conf.all.rp_filter = 0
Sat Jun 15 09:26:00 UTC 2013
rtc-test rtc-test.0: test_rtc_set_mmss, secs = 1371288360
Running postinst /etc/rpm-postinsts/debianutils...
Running postinst /etc/rpm-postinsts/sysvinit-inittab...
INIT: Entering runlevel: 5
Starting Dropbear SSH server: Will output 1024 bit rsa secret key to '/etc/dropbear/dropbear_rsa_host_key'
Generating key, this may take a while...
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAAAgwC1iT2dV/N1Oy9rz3QpjtO6IE4PK+58f0IR85kIVkvBMANnOGqq9DTBzlmaaBaIfa7qes/pNLDs6GErstW2ej+X2UgxZNMXPFli3LYghQgpSSUDK0QNsmfjQ9gWrMufAvuVfbx3zC/xs
Fingerprint: md5 17:57:80:97:ab:b9:12:43:a1:8b:c7:93:16:35:4a:c0
dropbear.
Starting network benchmark server: netserver.
Starting system log daemon...0
Starting kernel log daemon...0
Stopping Bootlog daemon: bootlogd.
Poky 9.0 (Yocto Project 1.4 Reference Distro) 1.4 p3041ds ttyS0
p3041ds login: root
root@p3041ds:~# ifconfig -a
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
sit0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-10-0D-00-00-00-00-00-00-00-00
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
tunl0 Link encap:IPIP Tunnel HWaddr
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Qoriq p3041ds no ethernet interface probed
2013-08-06 9:49 ` Mercier Ivan
@ 2013-08-07 6:43 ` Luo Zhenhua-B19537
2013-08-08 12:41 ` Mercier Ivan
0 siblings, 1 reply; 8+ messages in thread
From: Luo Zhenhua-B19537 @ 2013-08-07 6:43 UTC (permalink / raw)
To: Mercier Ivan; +Cc: meta-freescale
[-- Attachment #1.1: Type: text/plain, Size: 3755 bytes --]
Which rcw do you use? can you post your full u-boot log?
Attachment is the log file of my trial with SDK 1.4 prebuilt images.
Best Regards,
Zhenhua
From: Mercier Ivan [mailto:ivan.mercier@gmail.com]
Sent: Tuesday, August 06, 2013 5:49 PM
To: Luo Zhenhua-B19537
Cc: meta-freescale@yoctoproject.org
Subject: Re: [meta-freescale] Qoriq p3041ds no ethernet interface probed
yeah I'm using the right fman I think
CPU0: P3041E, Version: 1.1, (0x82190311)
fsl_fman_ucode_p3041_r1.1_106_1_9.bin
atached the linux boot log
thanks for your help
2013/8/6 Luo Zhenhua-B19537 <B19537@freescale.com<mailto:B19537@freescale.com>>
Ivan,
Please make sure you are using the right fman-ucode version(see your silicon version), if is helpful if you can send your full boot logs.
Best Regards,
Zhenhua
From: Mercier Ivan [mailto:ivan.mercier@gmail.com<mailto:ivan.mercier@gmail.com>]
Sent: Monday, August 05, 2013 10:03 PM
To: Luo Zhenhua-B19537
Cc: meta-freescale@yoctoproject.org<mailto:meta-freescale@yoctoproject.org>
Subject: Re: [meta-freescale] Qoriq p3041ds no ethernet interface probed
I also tried with
uImage--3.8-r15.2-p3041ds-20130615080429.bin
uImage--3.8-r15.2-p3041ds-20130615080429.dtb
fsl-image-core-p3041ds-20130615090034.rootfs.ext2.gz.u-boot
2013/8/5 Mercier Ivan <ivan.mercier@gmail.com<mailto:ivan.mercier@gmail.com>>
Hi,
both "ifconfig.net-tools -a" and "ifconfig.inetutils -a" give only loopback and tunnel interfaces...
I have the same problem with the last official image from QorIQ-SDK-V1.4-PPCE500MC-IMAGE-20130625-yocto.iso
with uImage--3.8-r14.3-p3041ds-20130802074721.bin and uImage--3.8-r14.3-p3041ds-20130802074721.bin
something else to try?
thank you
2013/8/5 Luo Zhenhua-B19537 <B19537@freescale.com<mailto:B19537@freescale.com>>
Hi Ivan,
Please check if the ifconfig is provided by net-tools, I recall the issue is caused by ifconfig provided by other package(I don't recall the exact package name).
Can you please try the images built by SDK 1.4(uImage, dtb, rootfs...)? Those images are verified to be working.
Best Regards,
Zhenhua
From: meta-freescale-bounces@yoctoproject.org<mailto:meta-freescale-bounces@yoctoproject.org> [mailto:meta-freescale-bounces@yoctoproject.org<mailto:meta-freescale-bounces@yoctoproject.org>] On Behalf Of Mercier Ivan
Sent: Friday, August 02, 2013 7:24 PM
To: meta-freescale@yoctoproject.org<mailto:meta-freescale@yoctoproject.org>
Subject: [meta-freescale] Qoriq p3041ds no ethernet interface probed
Hi everybody,
I'm trying to make my 1G ethernet working on freescale p3041ds board.
It works on U-boot but still doesn't work in Linux....
here is my conf:
gcc version 4.6.3 20120301 (Wed Dec 5 19:16:53 CST 2012 build.sh rev=777 s=F463 -i /pkg/fs-DTgnu- ELe500mc -V release-CDE-r777_eabi_F463_ELe500mc) (GCC)
Linux p3041ds 3.8.13-rt9 from git://git.freescale.com/ppc/sdk/linux.git<http://git.freescale.com/ppc/sdk/linux.git>
device tree from arch/powerpc/boot/dts/p3041ds.dts
root file system builded with yocto from freescale sdk 1.4
On boot,
I can see my ethernet interface probed
Freescale FM module (Aug 2 2013:10:34:14), FMD API version 21.1.0
Freescale FM Ports module (Aug 2 2013:10:34:14)
dpaa_debugfs: FSL DPAA Ethernet debugfs entries ()
fsl_mac: mac.c:417:mac_load() fsl_mac: FSL FMan MAC API based driver ()
fsl_mac ffe4e0000.ethernet: FMan dTSEC version: 0x08240101
fsl_mac ffe4e0000.ethernet: FMan MAC address: 00:11:55:77:88:99
but
#ifconfig -a returns only loopback interface.
Does anybody know where this problem could be from?
device tree?uboot conf?linux conf?
Many thanks
attached: my device tree source and linux .config
[-- Attachment #1.2: Type: text/html, Size: 18964 bytes --]
[-- Attachment #2: p3041ds.log --]
[-- Type: application/octet-stream, Size: 31125 bytes --]
U-Boot 2013.01-00115-g831b30d (Jun 14 2013 - 05:41:56)
CPU0: P3041E, Version: 1.1, (0x82190311)
Core: E500MC, Version: 2.2, (0x80230022)
Clock Configuration:
CPU0:1500 MHz, CPU1:1500 MHz, CPU2:1500 MHz, CPU3:1500 MHz,
CCB:750 MHz,
DDR:666.667 MHz (1333.333 MT/s data rate) (Asynchronous), LBC:93.750 MHz
FMAN1: 583.333 MHz
QMAN: 375 MHz
PME: 375 MHz
L1: D-cache 32 kB enabled
I-cache 32 kB enabled
Reset Configuration Word (RCW):
00000000: 12600000 00000000 241c0000 00000000
00000010: d8984a01 03002000 de800000 41000000
00000020: 00000000 00000000 00000000 10070000
00000030: 00000000 00000000 00000000 00000000
Board: P3041DS, Sys ID: 0x1c, Sys Ver: 0x12, FPGA Ver: 0x05, vBank: 4
SERDES Reference Clocks: Bank1=100Mhz Bank2=125Mhz Bank3=125Mhz
I2C: ready
SPI: ready
DRAM: Initializing....using SPD
Detected UDIMM i-DIMM
2 GiB (DDR3, 64-bit, CL=9, ECC on)
DDR Chip-Select Interleaving Mode: CS0+CS1
Testing 0x00000000 - 0x7fffffff
Remap DDR
POST memory PASSED
Flash: 128 MiB
L2: 128 KB enabled
Corenet Platform Cache: 1024 KB enabled
SRIO1: disabled
SRIO2: disabled
NAND: 1024 MiB
MMC: FSL_SDHC: 0
EEPROM: NXID v1
PCIe1: Root Complex, x1, regs @ 0xfe200000
01:00.0 - 8086:10d3 - Network controller
PCIe1: Bus 00 - 01
PCIe2: disabled
PCIe3: Root Complex, x1, regs @ 0xfe202000
03:00.0 - 1095:3132 - Mass storage controller
PCIe3: Bus 02 - 03
PCIe4: disabled
In: serial
Out: serial
Err: serial
Net: Initializing Fman
Fman1: Uploading microcode version 106.1.9
PHY reset timed out
e1000: 00:1b:21:81:cc:81
FM1@DTSEC1, FM1@DTSEC2, FM1@DTSEC3, FM1@DTSEC4, FM1@DTSEC5, FM1@TGEC1, e1000#0 [PRIME]
Warning: e1000#0 MAC addresses don't match:
Address in SROM is 00:1b:21:81:cc:81
Address in environment is 00:e0:0c:00:df:06
=> setenv dir b19537/p3041ds
=> setenv bootnohv 'setenv bootargs root=/dev/ram rw console=ttyS0,115200 ramdisk_size=0x100000; tftp 1000000 $dir/uImage; tftp 2000000 $dir/rootfs.ext2.gz.u-boot; tftp c00000 $dir/p3041ds.dtb; bootm 1000000 2000000 c00000'
=> run bootnohv
Using e1000#0 device
TFTP from server 192.168.1.1; our IP address is 192.168.1.226
Filename 'b19537/p3041ds/uImage'.
Load address: 0x1000000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
##########
9.1 MiB/s
done
Bytes transferred = 3956432 (3c5ed0 hex)
Using e1000#0 device
TFTP from server 192.168.1.1; our IP address is 192.168.1.226
Filename 'b19537/p3041ds/rootfs.ext2.gz.u-boot'.
Load address: 0x2000000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#####################################################
7.7 MiB/s
done
Bytes transferred = 26531717 (194d785 hex)
Using e1000#0 device
TFTP from server 192.168.1.1; our IP address is 192.168.1.226
Filename 'b19537/p3041ds/p3041ds.dtb'.
Load address: 0xc00000
Loading: ####
729.5 KiB/s
done
Bytes transferred = 45618 (b232 hex)
WARNING: adjusting available memory to 30000000
## Booting kernel from Legacy Image at 01000000 ...
Image Name: Linux-3.8.13-rt9-QorIQ-SDK-V1.4
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 3956368 Bytes = 3.8 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 02000000 ...
Image Name: fsl-image-core-p3041ds-201306150
Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
Data Size: 26531653 Bytes = 25.3 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 00c00000
Booting using the fdt blob at 0x00c00000
Uncompressing Kernel Image ... OK
Loading Ramdisk to 2e6b2000, end 2ffff745 ... OK
Loading Device Tree to 03fe1000, end 03fff231 ... OK
Using P3041 DS machine description
Memory CAM mapping: 256/256/256 Mb, residual: 1280Mb
Linux version 3.8.13-rt9-QorIQ-SDK-V1.4 (jenkins@topsy) (gcc version 4.7.2 (GCC) ) #1 SMP Sat Jun 15 03:45:15 CDT 2013
Found initrd at 0xee6b2000:0xeffff745
No /soc@ffe000000/qman@318000 property 'fsl,qman-fqd', using memblock_alloc(0000000000400000)
No /soc@ffe000000/qman@318000 property 'fsl,qman-pfdr', using memblock_alloc(0000000002000000)
Qman ver:0a01,01,02
No /soc@ffe000000/bman@31a000 property 'fsl,bman-fbpr', using memblock_alloc(0000000001000000)
Bman ver:0a02,01,00
pme: No /soc@ffe000000/pme@316000 property 'fsl,pme-pdsr', using memblock_alloc(0x0000000001000000)
pme: No /soc@ffe000000/pme@316000 property 'fsl,pme-sre', using memblock_alloc(0x0000000000a00000)
No USDPAA memory, no 'usdpaa_mem' bootarg
CPU maps initialized for 1 thread per core
bootconsole [udbg0] enabled
setup_arch: bootmem
P3041 DS board from Freescale Semiconductor
arch: exit
Zone ranges:
DMA [mem 0x00000000-0x2fffffff]
Normal empty
HighMem [mem 0x30000000-0x7fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00000000-0x7fffffff]
MMU: Allocated 1088 bytes of context maps for 255 contexts
PERCPU: Embedded 10 pages/cpu @c18d3000 s17216 r8192 d15552 u40960
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520192
Kernel command line: root=/dev/ram rw console=ttyS0,115200 ramdisk_size=0x100000
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1898736k/2097152k available (8116k kernel code, 198416k reserved, 304k data, 558k bss, 268k init)
Kernel virtual memory layout:
* 0xfff5f000..0xfffff000 : fixmap
* 0xffc00000..0xffe00000 : highmem PTEs
* 0xffbfa000..0xffc00000 : early ioremap
* 0xf1000000..0xffbfa000 : vmalloc & ioremap
Hierarchical RCU implementation.
RCU debugfs-based tracing is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
NR_IRQS:512 nr_irqs:512 16
mpic: Setting up MPIC " OpenPIC " version 1.2 at ffe040000, max 4 CPUs
mpic: ISU size: 512, shift: 9, mask: 1ff
mpic: Initializing for 512 sources
clocksource: timebase mult[2aaaaaab] shift[24] registered
Console: colour dummy device 80x25
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
mpic: requesting IPIs...
e500 family performance monitor hardware support registered
Brought up 4 CPUs
devtmpfs: initialized
NET: Registered protocol family 16
Found FSL PCI host bridge at 0x0000000ffe200000. Firmware bus number: 0->1
PCI host bridge /pcie@ffe200000 (primary) ranges:
MEM 0x0000000c00000000..0x0000000c1fffffff -> 0x00000000e0000000
IO 0x0000000ff8000000..0x0000000ff800ffff -> 0x0000000000000000
/pcie@ffe200000: PCICSRBAR @ 0xdf000000
EDAC PCI0: Giving out device to module 'MPC85xx_edac' controller 'mpc85xx_pci_err': DEV 'ffe200000.pcie' (INTERRUPT)
MPC85xx_edac acquired irq 482 for PCI Err
MPC85xx_edac PCI err registered
Found FSL PCI host bridge at 0x0000000ffe202000. Firmware bus number: 0->1
PCI host bridge /pcie@ffe202000 ranges:
MEM 0x0000000c40000000..0x0000000c5fffffff -> 0x00000000e0000000
IO 0x0000000ff8020000..0x0000000ff802ffff -> 0x0000000000000000
/pcie@ffe202000: PCICSRBAR @ 0xdf000000
EDAC PCI1: Giving out device to module 'MPC85xx_edac' controller 'mpc85xx_pci_err': DEV 'ffe202000.pcie' (INTERRUPT)
MPC85xx_edac acquired irq 480 for PCI Err
MPC85xx_edac PCI err registered
PCI: Probing PCI hardware
fsl-pci ffe200000.pcie: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0xc00000000-0xc1fffffff] (bus address [0xe0000000-0xffffffff])
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: ignoring class 0x0b2000 (doesn't match header type 01)
PCIE error(s) detected
pci 0000:00:00.0: PCI bridge to [bus 01-ff]
PCIE ERR_DR register: 0x80020000
PCIE ERR_CAP_STAT register: 0x80000001
PCIE ERR_CAP_R0 register: 0x00000800
PCIE ERR_CAP_R1 register: 0x00000000
PCIE ERR_CAP_R2 register: 0x00000000
PCIE ERR_CAP_R3 register: 0x00000000
fsl-pci ffe202000.pcie: PCI host bridge to bus 0001:02
pci_bus 0001:02: root bus resource [io 0x20000-0x2ffff] (bus address [0x0000-0xffff])
pci_bus 0001:02: root bus resource [mem 0xc40000000-0xc5fffffff] (bus address [0xe0000000-0xffffffff])
pci_bus 0001:02: root bus resource [bus 02-ff]
pci 0001:02:00.0: ignoring class 0x0b2000 (doesn't match header type 01)
PCIE error(s) detected
pci 0001:02:00.0: Primary bus is hard wired to 0
pci 0001:02:00.0: bridge configuration invalid ([bus 01-01]), reconfiguring
pci 0001:02:00.0: PCI bridge to [bus 03-ff]
PCIE ERR_DR register: 0x80020000
PCIE ERR_CAP_STAT register: 0x80000001
PCIE ERR_CAP_R0 register: 0x00000800
PCIE ERR_CAP_R1 register: 0x00000000
PCIE ERR_CAP_R2 register: 0x00000000
PCIE ERR_CAP_R3 register: 0x00000000
pci 0000:00:00.0: BAR 9: can't assign mem pref (size 0x100000)
pci 0000:01:00.0: BAR 6: assigned [mem 0xc00040000-0xc0007ffff pref]
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0: bridge window [io 0x0000-0xffff]
pci 0000:00:00.0: bridge window [mem 0xc00000000-0xc1fffffff]
pci 0001:02:00.0: BAR 9: can't assign mem pref (size 0x100000)
pci 0001:03:00.0: BAR 6: assigned [mem 0xc40080000-0xc400fffff pref]
pci 0001:02:00.0: PCI bridge to [bus 03]
pci 0001:02:00.0: bridge window [io 0x20000-0x2ffff]
pci 0001:02:00.0: bridge window [mem 0xc40000000-0xc5fffffff]
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Bman err interrupt handler present
Bman portal initialised, cpu 0
Bman portal initialised, cpu 1
Bman portal initialised, cpu 2
Bman portal initialised, cpu 3
Bman portals initialised
Bman: BPID allocator includes range 32:32
Qman err interrupt handler present
Qman portal initialised, cpu 0
Qman portal initialised, cpu 1
Qman portal initialised, cpu 2
Qman portal initialised, cpu 3
Qman portals initialised
Qman: FQID allocator includes range 256:256
Qman: FQID allocator includes range 32768:32768
Qman: CGRID allocator includes range 0:256
Qman: pool channel allocator includes range 33:15
Switching to clocksource timebase
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 25912k freed
fsl-rcpm ffe0e2000.global-utilities: Freescale RCPM driver
audit: initializing netlink socket (disabled)
type=2000 audit(0.488:1): initialized
bounce pool size: 64 pages
HugeTLB registered 1 MB page size, pre-allocated 0 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
HugeTLB registered 16 MB page size, pre-allocated 0 pages
HugeTLB registered 64 MB page size, pre-allocated 0 pages
HugeTLB registered 256 MB page size, pre-allocated 0 pages
HugeTLB registered 1 GB page size, pre-allocated 0 pages
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
NTFS driver 2.1.30 [Flags: R/O].
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 1327
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250.0: ttyS0 at MMIO 0xffe11c500 (irq = 36) is a 16550A
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
serial8250.0: ttyS1 at MMIO 0xffe11c600 (irq = 36) is a 16550A
serial8250.0: ttyS2 at MMIO 0xffe11d500 (irq = 37) is a 16550A
serial8250.0: ttyS3 at MMIO 0xffe11d600 (irq = 37) is a 16550A
ePAPR hypervisor byte channel driver
Generic non-volatile memory driver v1.1
brd: module loaded
loop: module loaded
st: Version 20101219, fixed bufsize 32768, s/g segs 256
fsl-sata ffe220000.sata: Sata FSL Platform/CSB Driver init
scsi0 : sata_fsl
ata1: SATA max UDMA/133 irq 68
fsl-sata ffe221000.sata: Sata FSL Platform/CSB Driver init
scsi1 : sata_fsl
ata2: SATA max UDMA/133 irq 69
scsi2 : sata_sil24
scsi3 : sata_sil24
ata3: SATA max UDMA/100 host m128@0xc40000000 port 0xc40004000 irq 42
ata4: SATA max UDMA/100 host m128@0xc40000000 port 0xc40006000 irq 42
fe8000000.flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x002801
Amd/Fujitsu Extended Query Table at 0x0040
Amd/Fujitsu Extended Query version 1.3.
number of CFI chips: 1
ONFI param page 0 valid
ONFI flash detected
NAND device: Manufacturer ID: 0x20, Chip ID: 0xd3 (ST Micro NAND08GW3B2CN6), 1024MiB, page size: 2048, OOB size: 64
Bad block table found at page 524224, version 0x01
Bad block table found at page 524160, version 0x01
nand_read_bbt: bad block at 0x000013320000
nand_read_bbt: bad block at 0x000021140000
nand_read_bbt: bad block at 0x000021180000
nand_read_bbt: bad block at 0x00002f1c0000
6 ofpart partitions found on MTD device ffa00000.flash
Creating 6 MTD partitions on "ffa00000.flash":
0x000000000000-0x000002000000 : "NAND U-Boot Image"
0x000002000000-0x000012000000 : "NAND Root File System"
0x000012000000-0x00001a000000 : "NAND Compressed RFS Image"
0x00001a000000-0x00001e000000 : "NAND Linux Kernel Image"
0x00001e000000-0x00001f000000 : "NAND DTB Image"
0x00001f000000-0x000040000000 : "NAND Writable User area"
eLBC NAND device at 0xfffa00000, bank 2
fsl_espi ffe110000.spi: master is unqueued, this is deprecated
m25p80 spi32766.0: found s25fl129p1, expected s25sl12801
m25p80 spi32766.0: s25fl129p1 (16384 Kbytes)
4 ofpart partitions found on MTD device spi32766.0
Creating 4 MTD partitions on "spi32766.0":
0x000000000000-0x000000100000 : "u-boot"
0x000000100000-0x000000600000 : "kernel"
0x000000600000-0x000000700000 : "dtb"
0x000000700000-0x000001000000 : "file system"
fsl_espi ffe110000.spi: at 0xf1174000 (irq = 53)
libphy: Fixed MDIO Bus: probed
mdio-mux-mmioreg fffdf0009.mdio-mux-emi1: failed to register mdio-mux bus /localbus@ffe124000/board-control@3,0/mdio-mux-emi1
platform fffdf0009.mdio-mux-emi1: Driver mdio-mux-mmioreg requests probe deferral
libphy: Freescale PowerQUICC MII Bus: probed
libphy: Freescale XGMAC MDIO Bus: probed
mdio_bus ffe4f1000: MDIO read error
mdio_bus ffe4f1000: MDIO read error
mdio_bus ffe4f1000: MDIO read error
mdio_bus ffe4f1000: MDIO read error
FMAN(0) Fifo size settings:
- Total buffers available(512 - 256B/buffer)
- Total throughput(14Gbps)
- Max frame size(1522B)
- 1G ports TX 4(12 bufs set (min: 12))
- 1G ports RX 4(27 bufs set (min: 14))
- 10G ports TX 1(18 bufs set (min: 18))
- 10G ports RX 1(272 bufs set (min: 14))
- OH-HC ports 4(8)
- Shared extra buffers(32)
FMAN(0) open dma settings:
- Total open dma available(32)
- 1G ports TX 4(2)
- 1G ports RX 4(1)
- 10G ports TX 1(8)
- 10G ports RX 1(8)
- OH-HC ports 4(1)
- Shared extra open dma(0)
FMAN(0) Tnums settings:
- Total Tnums available(128)
- 1G ports TX 4(8)
- 1G ports RX 4(9)
- 10G ports TX 1(22)
- 10G ports RX 1(22)
- OH-HC ports 4(2)
- Shared extra tnums(8)
Freescale FM module (Jun 15 2013:03:44:51), FMD API version 21.1.0
Freescale FM Ports module (Jun 15 2013:03:44:52)
dpaa_debugfs: FSL DPAA Ethernet debugfs entries ()
fsl_mac: mac.c:417:mac_load() fsl_mac: FSL FMan MAC API based driver ()
fsl_mac ffe4e0000.ethernet: FMan dTSEC version: 0x08240101
fsl_mac ffe4e0000.ethernet: FMan MAC address: 00:e0:0c:00:df:00
fsl_mac ffe4e2000.ethernet: FMan dTSEC version: 0x08240101
fsl_mac ffe4e2000.ethernet: FMan MAC address: 00:e0:0c:00:df:01
fsl_mac ffe4e4000.ethernet: FMan dTSEC version: 0x08240101
fsl_mac ffe4e4000.ethernet: FMan MAC address: 00:e0:0c:00:df:02
fsl_mac ffe4e6000.ethernet: FMan dTSEC version: 0x08240101
fsl_mac ffe4e6000.ethernet: FMan MAC address: 00:e0:0c:00:df:03
fsl_mac ffe4e8000.ethernet: FMan dTSEC version: 0x08240101
fsl_mac ffe4e8000.ethernet: FMan MAC address: 00:e0:0c:00:df:04
cpu2: Applying 10G TX ECC workaround (10GMAC-A004) ...
cpu2: done.
fsl_mac ffe4f0000.ethernet: FMan XGEC version: 0x00010330
fsl_mac ffe4f0000.ethernet: FMan MAC address: 00:e0:0c:00:df:05
fsl_dpa: dpaa_eth.c:4320:dpa_load() fsl_dpa: FSL DPAA Ethernet driver ()
fsl_dpa ethernet.14: Using private BM buffer pools
fsl_dpa: dpaa_eth.c:3715:dpa_rx_fq_init() Using dynamic RX QM frame queues
fsl_dpa: dpaa_eth.c:3739:dpa_tx_fq_init() Using dynamic TX QM frame queues
fsl_dpa ethernet.15: Using private BM buffer pools
fsl_dpa: dpaa_eth.c:3715:dpa_rx_fq_init() Using dynamic RX QM frame queues
fsl_dpa: dpaa_eth.c:3739:dpa_tx_fq_init() Using dynamic TX QM frame queues
fsl_dpa ethernet.16: Using private BM buffer pools
fsl_dpa: dpaa_eth.c:3715:dpa_rx_fq_init() Using dynamic RX QM frame queues
fsl_dpa: dpaa_eth.c:3739:dpa_tx_fq_init() Using dynamic TX QM frame queues
fsl_dpa ethernet.17: Using private BM buffer pools
fsl_dpa: dpaa_eth.c:3715:dpa_rx_fq_init() Using dynamic RX QM frame queues
fsl_dpa: dpaa_eth.c:3739:dpa_tx_fq_init() Using dynamic TX QM frame queues
fsl_dpa ethernet.18: Using private BM buffer pools
fsl_dpa: dpaa_eth.c:3715:dpa_rx_fq_init() Using dynamic RX QM frame queues
fsl_dpa: dpaa_eth.c:3739:dpa_tx_fq_init() Using dynamic TX QM frame queues
fsl_oh: offline_port.c:439:oh_port_load() fsl_oh: FSL FMan Offline Parsing port driver ()
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
ata1: Signature Update detected @ 504 msecs
ata2: Signature Update detected @ 504 msecs
e1000e 0000:01:00.0: Disabling ASPM L0s L1
e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:01:00.0 eth5: (PCI Express:2.5GT/s:Width x1) 00:1b:21:81:cc:81
e1000e 0000:01:00.0 eth5: Intel(R) PRO/1000 Network Connection
e1000e 0000:01:00.0 eth5: MAC: 3, PHY: 8, PBA No: E46981-004
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
/soc@ffe000000/usb@210000: Invalid 'dr_mode' property, fallback to host mode
fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
fsl-ehci fsl-ehci.0: irq 44, io mem 0xffe210000
ata1.00: ATA-7: ST380815AS, 3.AAC, max UDMA/133
fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
ata2.00: ATA-7: ST380815AS, 4.AAB, max UDMA/133
ata2.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 16/32)
fsl-ehci fsl-ehci.1: irq 45, io mem 0xffe211000
fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i2c /dev entries driver
mpc-i2c ffe118100.i2c: timeout 1000000 us
mpc-i2c ffe119100.i2c: timeout 1000000 us
ata2.00: configured for UDMA/133
ata1.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 16/32)
rtc-ds3232: probe of 1-0068 failed with error -5
mpc-i2c ffe118000.i2c: timeout 1000000 us
mpc-i2c ffe119000.i2c: timeout 1000000 us
EDAC MC: Ver: 3.0.0
Freescale(R) MPC85xx EDAC driver, (C) 2006 Montavista Software
EDAC MC0: Giving out device to 'MPC85xx_edac' 'mpc85xx_mc_err': DEV mpc85xx_mc_err
MPC85xx_edac acquired irq 490 for MC
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST380815AS 3.AA PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access ATA ST380815AS 4.AA PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
MPC85xx_edac MC err registered
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on ffe114000.sdhc [ffe114000.sdhc] using ADMA
platform caam_qi.0: Linux CAAM Queue I/F driver initialised
caam ffe300000.crypto: device ID = 0x0a12010000000000 (Era 3)
caam ffe300000.crypto: job rings = 4, qi = 1
caam ffe300000.crypto: fsl,sec-v4.2 algorithms registered in /proc/crypto
platform ffe301000.jr: registering rng-caam
platform caam_qi.0: fsl,sec-v4.2 algorithms registered in /proc/crypto
Freescale USDPAA process driver
fsl-usdpaa: no region found
Freescale USDPAA process IRQ driver
fsl-pme ffe316000.pme: ver: 0x00100201
mmc0: new SDHC card at address feb9
mmcblk0: mmc0:feb9 SD04G 3.69 GiB
mmcblk0: unknown partition table
Freescale pme2 db driver
Freescale pme2 scan driver
fsl-pme2-scan: device pme_scan registered
Freescale hypervisor management driver
fsl-hv: no hypervisor found
IPv4 over IPv4 tunneling driver
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
libphy: mdio_mux: probed
libphy: mdio_mux: probed
mdio-mux-mmioreg fffdf0009.mdio-mux-emi1: Version 1.0
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
usb 1-1: new full-speed USB device number 2 using fsl-ehci
usb 1-1: not running at top speed; connect to a high speed hub
scsi4 : usb-storage 1-1:1.0
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
ata3.00: ATA-7: ST3808110AS, 3.AAE, max UDMA/133
ata3.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 31/32)
scsi 4:0:0:0: Direct-Access Kingston DT 101 G2 1.00 PQ: 0 ANSI: 2
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdc] 3913664 512-byte logical blocks: (2.00 GB/1.86 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA ST3808110AS 3.AA PQ: 0 ANSI: 5
sd 2:0:0:0: [sdd] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 2:0:0:0: [sdd] Write Protect is off
sd 2:0:0:0: Attached scsi generic sg3 type 0
sd 2:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdc] No Caching mode page present
sdd: sdd1
sd 2:0:0:0: [sdd] Attached SCSI disk
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sd 4:0:0:0: [sdc] No Caching mode page present
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 4:0:0:0: [sdc] No Caching mode page present
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sd 4:0:0:0: [sdc] Attached SCSI removable disk
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 0)
ata4.00: ATA-7: ST380815AS, 3.AAD, max UDMA/133
ata4.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/100
scsi 3:0:0:0: Direct-Access ATA ST380815AS 3.AA PQ: 0 ANSI: 5
sd 3:0:0:0: [sde] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 3:0:0:0: Attached scsi generic sg4 type 0
sd 3:0:0:0: [sde] Write Protect is off
sd 3:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1
sd 3:0:0:0: [sde] Attached SCSI disk
RAMDISK: gzip image found at block 0
VFS: Mounted root (ext2 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 268k freed
INIT: version 2.88 booting
Starting udev
udevd[1068]: starting version 182
EXT2-fs (sdb1): warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs (sdd1): warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs (sdc1): warning: mounting unchecked fs, running e2fsck is recommended
Starting Bootlog daemon: bootlogd: cannot allocate pseudo tty: No such file or directory
bootlogd.
Configuring network interfaces... done.
net.ipv4.conf.default.rp_filter = 0
net.ipv4.conf.all.rp_filter = 0
hwclock: can't open '/dev/misc/rtc': No such file or directory
Sat Jun 15 09:26:00 UTC 2013
hwclock: can't open '/dev/misc/rtc': No such file or directory
Running postinst /etc/rpm-postinsts/debianutils...
Running postinst /etc/rpm-postinsts/sysvinit-inittab...
INIT: Entering runlevel: 5
Starting Dropbear SSH server: Will output 1024 bit rsa secret key to '/etc/dropbear/dropbear_rsa_host_key'
Generating key, this may take a while...
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAAAgwCQlZzbXBzSuYW26Odia2cDgMcKG0YMxDjP8VFA1ikYbs2yG29lNj54Ccwm+Yiji/aUYGI0JnNEzfpzTf1pHhg2b9XLrm1uuWOeSIsqT+URolw9w+ozDGi1R0wQzKOQEM6OXo27FtQrW20YxMXuydKQZOoNeYia0W2QEbRMhIDtDd4l root@p3041ds
Fingerprint: md5 04:86:07:8f:72:09:1a:fc:a5:7e:d1:3f:64:fb:2a:fe
dropbear.
hwclock: can't open '/dev/misc/rtc': No such file or directory
Starting network benchmark server: netserver.
Starting system log daemon...0
Starting kernel log daemon...0
Stopping Bootlog daemon: bootlogd.
Poky 9.0 (Yocto Project 1.4 Reference Distro) 1.4 p3041ds ttyS0
p3041ds login: root
root@p3041ds:~# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:1b:21:81:cc:81
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:40
fm1-10g Link encap:Ethernet HWaddr 00:e0:0c:00:df:05
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Memory:fe4f0000-fe4f0fff
fm1-gb0 Link encap:Ethernet HWaddr 00:e0:0c:00:df:00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Memory:fe4e0000-fe4e0fff
fm1-gb1 Link encap:Ethernet HWaddr 00:e0:0c:00:df:01
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Memory:fe4e2000-fe4e2fff
fm1-gb3 Link encap:Ethernet HWaddr 00:e0:0c:00:df:03
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Memory:fe4e6000-fe4e6fff
fm1-gb4 Link encap:Ethernet HWaddr 00:e0:0c:00:df:04
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Memory:fe4e8000-fe4e8fff
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
sit0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-10-0D-00-00-00-00-00-00-00-00
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
tunl0 Link encap:IPIP Tunnel HWaddr
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
root@p3041ds:~#
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Qoriq p3041ds no ethernet interface probed
2013-08-07 6:43 ` Luo Zhenhua-B19537
@ 2013-08-08 12:41 ` Mercier Ivan
0 siblings, 0 replies; 8+ messages in thread
From: Mercier Ivan @ 2013-08-08 12:41 UTC (permalink / raw)
To: Luo Zhenhua-B19537; +Cc: meta-freescale
[-- Attachment #1: Type: text/plain, Size: 4434 bytes --]
env variable eth3addr was missing in uboot.
I had only set ethaddr variable.
now fm1-gb3 works in linux
Thanks for your help
2013/8/7 Luo Zhenhua-B19537 <B19537@freescale.com>
> Which rcw do you use? can you post your full u-boot log? ****
>
> ** **
>
> Attachment is the log file of my trial with SDK 1.4 prebuilt images. ****
>
> ** **
>
> ** **
>
> Best Regards,****
>
> ** **
>
> Zhenhua****
>
> ** **
>
> *From:* Mercier Ivan [mailto:ivan.mercier@gmail.com]
> *Sent:* Tuesday, August 06, 2013 5:49 PM
>
> *To:* Luo Zhenhua-B19537
> *Cc:* meta-freescale@yoctoproject.org
> *Subject:* Re: [meta-freescale] Qoriq p3041ds no ethernet interface probed
> ****
>
> ** **
>
> yeah I'm using the right fman I think
>
> CPU0: P3041E, Version: 1.1, (0x82190311)****
>
> fsl_fman_ucode_p3041_r1.1_106_1_9.bin****
>
> ** **
>
> atached the linux boot log****
>
> ** **
>
> ** **
>
> thanks for your help****
>
> ** **
>
> ** **
>
> 2013/8/6 Luo Zhenhua-B19537 <B19537@freescale.com>****
>
> Ivan, ****
>
> ****
>
> Please make sure you are using the right fman-ucode version(see your
> silicon version), if is helpful if you can send your full boot logs. ****
>
> ****
>
> ****
>
> Best Regards,****
>
> ****
>
> Zhenhua****
>
> ****
>
> *From:* Mercier Ivan [mailto:ivan.mercier@gmail.com]
> *Sent:* Monday, August 05, 2013 10:03 PM
> *To:* Luo Zhenhua-B19537
> *Cc:* meta-freescale@yoctoproject.org
> *Subject:* Re: [meta-freescale] Qoriq p3041ds no ethernet interface probed
> ****
>
> ****
>
> I also tried with
> uImage--3.8-r15.2-p3041ds-20130615080429.bin
> uImage--3.8-r15.2-p3041ds-20130615080429.dtb
> fsl-image-core-p3041ds-20130615090034.rootfs.ext2.gz.u-boot****
>
> ****
>
> 2013/8/5 Mercier Ivan <ivan.mercier@gmail.com>****
>
> Hi,****
>
> both "ifconfig.net-tools -a" and "ifconfig.inetutils -a" give only
> loopback and tunnel interfaces...****
>
> I have the same problem with the last official image from
> QorIQ-SDK-V1.4-PPCE500MC-IMAGE-20130625-yocto.iso****
>
> with uImage--3.8-r14.3-p3041ds-20130802074721.bin and
> uImage--3.8-r14.3-p3041ds-20130802074721.bin ****
>
> something else to try?****
>
> thank you****
>
> ****
>
> ****
>
> 2013/8/5 Luo Zhenhua-B19537 <B19537@freescale.com>****
>
> Hi Ivan, ****
>
> ****
>
> Please check if the ifconfig is provided by net-tools, I recall the issue
> is caused by ifconfig provided by other package(I don’t recall the exact
> package name).****
>
> ****
>
> Can you please try the images built by SDK 1.4(uImage, dtb, rootfs…)?
> Those images are verified to be working. ****
>
> ****
>
> ****
>
> Best Regards,****
>
> ****
>
> Zhenhua****
>
> ****
>
> *From:* meta-freescale-bounces@yoctoproject.org [mailto:
> meta-freescale-bounces@yoctoproject.org] *On Behalf Of *Mercier Ivan
> *Sent:* Friday, August 02, 2013 7:24 PM
> *To:* meta-freescale@yoctoproject.org
> *Subject:* [meta-freescale] Qoriq p3041ds no ethernet interface probed****
>
> ****
>
> Hi everybody,****
>
> I'm trying to make my 1G ethernet working on freescale p3041ds board.****
>
> It works on U-boot but still doesn't work in Linux....****
>
> here is my conf:
>
> gcc version 4.6.3 20120301 (Wed Dec 5 19:16:53 CST 2012 build.sh
> rev=777 s=F463 -i /pkg/fs-DTgnu- ELe500mc -V
> release-CDE-r777_eabi_F463_ELe500mc) (GCC)
>
> Linux p3041ds 3.8.13-rt9 from git://git.freescale.com/ppc/sdk/linux.git***
> *
>
> device tree from arch/powerpc/boot/dts/p3041ds.dts****
>
> root file system builded with yocto from freescale sdk 1.4****
>
> On boot,****
>
> I can see my ethernet interface probed
>
> Freescale FM module (Aug 2 2013:10:34:14), FMD API version 21.1.0
> Freescale FM Ports module (Aug 2 2013:10:34:14)
> dpaa_debugfs: FSL DPAA Ethernet debugfs entries ()
> fsl_mac: mac.c:417:mac_load() fsl_mac: FSL FMan MAC API based driver ()
> fsl_mac ffe4e0000.ethernet: FMan dTSEC version: 0x08240101
> fsl_mac ffe4e0000.ethernet: FMan MAC address: 00:11:55:77:88:99****
>
> but****
>
> #ifconfig -a returns only loopback interface.****
>
> Does anybody know where this problem could be from?
> device tree?uboot conf?linux conf?****
>
> Many thanks****
>
> ****
>
> attached: my device tree source and linux .config****
>
> ****
>
> ****
>
> ****
>
> ** **
>
[-- Attachment #2: Type: text/html, Size: 15653 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2013-08-08 12:42 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-08-02 11:24 Qoriq p3041ds no ethernet interface probed Mercier Ivan
2013-08-05 9:32 ` Luo Zhenhua-B19537
2013-08-05 13:44 ` Mercier Ivan
2013-08-05 14:03 ` Mercier Ivan
2013-08-06 6:19 ` Luo Zhenhua-B19537
2013-08-06 9:49 ` Mercier Ivan
2013-08-07 6:43 ` Luo Zhenhua-B19537
2013-08-08 12:41 ` Mercier Ivan
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.