From: Shengjiu Wang <shengjiu.wang@gmail.com>
To: Rob Herring <robh@kernel.org>
Cc: Shengjiu Wang <shengjiu.wang@nxp.com>,
Mark Rutland <mark.rutland@arm.com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
Linux-ALSA <alsa-devel@alsa-project.org>,
Timur Tabi <timur@kernel.org>, Xiubo Li <Xiubo.Lee@gmail.com>,
linuxppc-dev@lists.ozlabs.org, Takashi Iwai <tiwai@suse.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Nicolin Chen <nicoleotsuka@gmail.com>,
Mark Brown <broonie@kernel.org>,
Fabio Estevam <festevam@gmail.com>,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v6 6/7] ASoC: dt-bindings: fsl_easrc: Add document for EASRC
Date: Wed, 15 Apr 2020 10:55:47 +0800 [thread overview]
Message-ID: <CAA+D8AP2CiRT7qkNa7yBDH0Dbd=i1eyqL4g4zobRmR-vEx4VBQ@mail.gmail.com> (raw)
In-Reply-To: <20200414154643.GA29098@bogus>
Hi Rob
On Tue, Apr 14, 2020 at 11:49 PM Rob Herring <robh@kernel.org> wrote:
>
> On Wed, Apr 01, 2020 at 04:45:39PM +0800, Shengjiu Wang wrote:
> > EASRC (Enhanced Asynchronous Sample Rate Converter) is a new
> > IP module found on i.MX8MN.
> >
> > Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> > ---
> > .../devicetree/bindings/sound/fsl,easrc.yaml | 101 ++++++++++++++++++
> > 1 file changed, 101 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/sound/fsl,easrc.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
> > new file mode 100644
> > index 000000000000..14ea60084420
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
> > @@ -0,0 +1,101 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/sound/fsl,easrc.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: NXP Asynchronous Sample Rate Converter (ASRC) Controller
> > +
> > +maintainers:
> > + - Shengjiu Wang <shengjiu.wang@nxp.com>
> > +
> > +properties:
> > + $nodename:
> > + pattern: "^easrc@.*"
> > +
> > + compatible:
> > + const: fsl,imx8mn-easrc
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + clocks:
> > + items:
> > + - description: Peripheral clock
> > +
> > + clock-names:
> > + items:
> > + - const: mem
> > +
> > + dmas:
> > + maxItems: 8
> > +
> > + dma-names:
> > + items:
> > + - const: ctx0_rx
> > + - const: ctx0_tx
> > + - const: ctx1_rx
> > + - const: ctx1_tx
> > + - const: ctx2_rx
> > + - const: ctx2_tx
> > + - const: ctx3_rx
> > + - const: ctx3_tx
> > +
> > + firmware-name:
> > + allOf:
> > + - $ref: /schemas/types.yaml#/definitions/string
> > + - const: imx/easrc/easrc-imx8mn.bin
> > + description: The coefficient table for the filters
> > +
> > + fsl,asrc-rate:
>
> fsl,asrc-rate-hz
Can we keep "fsl,asrc-rate", because I want this property
align with the one in fsl,asrc.txt. These two asrc modules
can share same property name.
best regards
wang shengjiu
WARNING: multiple messages have this Message-ID (diff)
From: Shengjiu Wang <shengjiu.wang@gmail.com>
To: Rob Herring <robh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
Linux-ALSA <alsa-devel@alsa-project.org>,
Timur Tabi <timur@kernel.org>, Xiubo Li <Xiubo.Lee@gmail.com>,
Fabio Estevam <festevam@gmail.com>,
Shengjiu Wang <shengjiu.wang@nxp.com>,
Takashi Iwai <tiwai@suse.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Nicolin Chen <nicoleotsuka@gmail.com>,
Mark Brown <broonie@kernel.org>,
linuxppc-dev@lists.ozlabs.org,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v6 6/7] ASoC: dt-bindings: fsl_easrc: Add document for EASRC
Date: Wed, 15 Apr 2020 10:55:47 +0800 [thread overview]
Message-ID: <CAA+D8AP2CiRT7qkNa7yBDH0Dbd=i1eyqL4g4zobRmR-vEx4VBQ@mail.gmail.com> (raw)
In-Reply-To: <20200414154643.GA29098@bogus>
Hi Rob
On Tue, Apr 14, 2020 at 11:49 PM Rob Herring <robh@kernel.org> wrote:
>
> On Wed, Apr 01, 2020 at 04:45:39PM +0800, Shengjiu Wang wrote:
> > EASRC (Enhanced Asynchronous Sample Rate Converter) is a new
> > IP module found on i.MX8MN.
> >
> > Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> > ---
> > .../devicetree/bindings/sound/fsl,easrc.yaml | 101 ++++++++++++++++++
> > 1 file changed, 101 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/sound/fsl,easrc.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
> > new file mode 100644
> > index 000000000000..14ea60084420
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
> > @@ -0,0 +1,101 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/sound/fsl,easrc.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: NXP Asynchronous Sample Rate Converter (ASRC) Controller
> > +
> > +maintainers:
> > + - Shengjiu Wang <shengjiu.wang@nxp.com>
> > +
> > +properties:
> > + $nodename:
> > + pattern: "^easrc@.*"
> > +
> > + compatible:
> > + const: fsl,imx8mn-easrc
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + clocks:
> > + items:
> > + - description: Peripheral clock
> > +
> > + clock-names:
> > + items:
> > + - const: mem
> > +
> > + dmas:
> > + maxItems: 8
> > +
> > + dma-names:
> > + items:
> > + - const: ctx0_rx
> > + - const: ctx0_tx
> > + - const: ctx1_rx
> > + - const: ctx1_tx
> > + - const: ctx2_rx
> > + - const: ctx2_tx
> > + - const: ctx3_rx
> > + - const: ctx3_tx
> > +
> > + firmware-name:
> > + allOf:
> > + - $ref: /schemas/types.yaml#/definitions/string
> > + - const: imx/easrc/easrc-imx8mn.bin
> > + description: The coefficient table for the filters
> > +
> > + fsl,asrc-rate:
>
> fsl,asrc-rate-hz
Can we keep "fsl,asrc-rate", because I want this property
align with the one in fsl,asrc.txt. These two asrc modules
can share same property name.
best regards
wang shengjiu
next prev parent reply other threads:[~2020-04-15 2:56 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-01 8:45 [PATCH v6 0/7] ASoC: Add new module driver for new ASRC Shengjiu Wang
2020-04-01 8:45 ` [PATCH v6 1/7] ASoC: fsl_asrc: rename asrc_priv to asrc Shengjiu Wang
2020-04-01 9:00 ` Nicolin Chen
2020-04-01 9:00 ` Nicolin Chen
2020-04-01 9:00 ` Nicolin Chen
2020-04-01 8:45 ` [PATCH v6 2/7] ASoC: dt-bindings: fsl_asrc: Add new property fsl,asrc-format Shengjiu Wang
2020-04-01 8:45 ` [PATCH v6 2/7] ASoC: dt-bindings: fsl_asrc: Add new property fsl, asrc-format Shengjiu Wang
2020-04-06 22:43 ` [PATCH v6 2/7] ASoC: dt-bindings: fsl_asrc: Add new property fsl,asrc-format Nicolin Chen
2020-04-06 22:43 ` Nicolin Chen
2020-04-06 22:43 ` Nicolin Chen
2020-04-14 15:23 ` Rob Herring
2020-04-14 15:23 ` Rob Herring
2020-04-14 15:23 ` Rob Herring
2020-04-01 8:45 ` [PATCH v6 3/7] ASoC: fsl-asoc-card: Support " Shengjiu Wang
2020-04-01 8:45 ` [PATCH v6 3/7] ASoC: fsl-asoc-card: Support new property fsl, asrc-format Shengjiu Wang
2020-04-06 22:59 ` [PATCH v6 3/7] ASoC: fsl-asoc-card: Support new property fsl,asrc-format Nicolin Chen
2020-04-06 22:59 ` Nicolin Chen
2020-04-06 22:59 ` Nicolin Chen
2020-04-01 8:45 ` [PATCH v6 4/7] ASoC: fsl_asrc: " Shengjiu Wang
2020-04-06 23:19 ` Nicolin Chen
2020-04-06 23:19 ` Nicolin Chen
2020-04-06 23:19 ` Nicolin Chen
2020-04-01 8:45 ` [PATCH v6 5/7] ASoC: fsl_asrc: Move common definition to fsl_asrc_common Shengjiu Wang
2020-04-06 23:48 ` Nicolin Chen
2020-04-06 23:48 ` Nicolin Chen
2020-04-06 23:48 ` Nicolin Chen
2020-04-11 5:49 ` Shengjiu Wang
2020-04-11 5:49 ` Shengjiu Wang
2020-04-12 2:08 ` Nicolin Chen
2020-04-12 2:08 ` Nicolin Chen
2020-04-13 3:16 ` Shengjiu Wang
2020-04-13 3:16 ` Shengjiu Wang
2020-04-13 4:31 ` Nicolin Chen
2020-04-13 4:31 ` Nicolin Chen
2020-04-13 7:19 ` Shengjiu Wang
2020-04-13 7:19 ` Shengjiu Wang
2020-04-01 8:45 ` [PATCH v6 6/7] ASoC: dt-bindings: fsl_easrc: Add document for EASRC Shengjiu Wang
2020-04-14 15:46 ` Rob Herring
2020-04-14 15:46 ` Rob Herring
2020-04-14 15:46 ` Rob Herring
2020-04-15 2:55 ` Shengjiu Wang [this message]
2020-04-15 2:55 ` Shengjiu Wang
2020-04-15 14:11 ` Rob Herring
2020-04-15 14:11 ` Rob Herring
2020-04-01 8:45 ` [PATCH v6 7/7] ASoC: fsl_easrc: Add EASRC ASoC CPU DAI drivers Shengjiu Wang
2020-04-07 0:29 ` Nicolin Chen
2020-04-07 0:29 ` Nicolin Chen
2020-04-07 0:29 ` Nicolin Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAA+D8AP2CiRT7qkNa7yBDH0Dbd=i1eyqL4g4zobRmR-vEx4VBQ@mail.gmail.com' \
--to=shengjiu.wang@gmail.com \
--cc=Xiubo.Lee@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mark.rutland@arm.com \
--cc=nicoleotsuka@gmail.com \
--cc=robh@kernel.org \
--cc=shengjiu.wang@nxp.com \
--cc=timur@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.