All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Rob Clark <robdclark@gmail.com>, Sean Paul <sean@poorly.run>,
	Abhinav Kumar <quic_abhinavk@quicinc.com>,
	David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
	freedreno@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] drm/msm: Remove spurious IRQF_ONESHOT flags from dsi & hdmi
Date: Thu, 27 Jan 2022 23:04:44 +0300	[thread overview]
Message-ID: <CAA8EJppWF27As46rRvYgHuqX=dwna2CQGZ79WXdrfqFbAK53uw@mail.gmail.com> (raw)
In-Reply-To: <20220127170405.155710-1-daniel.thompson@linaro.org>

On Thu, 27 Jan 2022 at 20:04, Daniel Thompson
<daniel.thompson@linaro.org> wrote:
>
> Quoting the header comments, IRQF_ONESHOT is "Used by threaded interrupts
> which need to keep the irq line disabled until the threaded handler has
> been run.". When applied to an interrupt that doesn't request a threaded
> irq then IRQF_ONESHOT has a lesser known (undocumented?) side effect,
> which it to disable the forced threading of irqs (and for "normal" kernels
> it is a nop). In this case I can find no evidence that suppressing forced
> threading is intentional. Had it been intentional then a driver must adopt
> the raw_spinlock API in order to avoid deadlocks on PREEMPT_RT kernels
> (and avoid calling any kernel API that uses regular spinlocks).
>
> Fix this by removing the spurious additional flag.
>
> This change is required for my Snapdragon 7cx Gen2 tablet to boot-to-GUI
> with PREEMPT_RT enabled.
>
> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>

Could you please split it into two parts: separate DSI and HDMI patches

> ---
>
> Notes:
>     Just in case anybody asks, yes! I did use coccinelle to do a quick scan
>     for similar issues. I didn't find any other instances in drivers/drm/ .
>
>  drivers/gpu/drm/msm/dsi/dsi_host.c | 2 +-
>  drivers/gpu/drm/msm/hdmi/hdmi.c    | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index 6b3ced4aaaf5d..3a3f53f0c8ae1 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -1877,7 +1877,7 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi)
>
>         /* do not autoenable, will be enabled later */
>         ret = devm_request_irq(&pdev->dev, msm_host->irq, dsi_host_irq,
> -                       IRQF_TRIGGER_HIGH | IRQF_ONESHOT | IRQF_NO_AUTOEN,
> +                       IRQF_TRIGGER_HIGH | IRQF_NO_AUTOEN,
>                         "dsi_isr", msm_host);
>         if (ret < 0) {
>                 dev_err(&pdev->dev, "failed to request IRQ%u: %d\n",
> diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
> index 3acdeae25caf0..a1bfbc4c74bf7 100644
> --- a/drivers/gpu/drm/msm/hdmi/hdmi.c
> +++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
> @@ -301,7 +301,7 @@ int msm_hdmi_modeset_init(struct hdmi *hdmi,
>         }
>
>         ret = devm_request_irq(&pdev->dev, hdmi->irq,
> -                       msm_hdmi_irq, IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> +                       msm_hdmi_irq, IRQF_TRIGGER_HIGH,
>                         "hdmi_isr", hdmi);
>         if (ret < 0) {
>                 DRM_DEV_ERROR(dev->dev, "failed to request IRQ%u: %d\n",
>
> base-commit: e783362eb54cd99b2cac8b3a9aeac942e6f6ac07
> --
> 2.34.1
>


-- 
With best wishes
Dmitry

WARNING: multiple messages have this Message-ID (diff)
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Daniel Thompson <daniel.thompson@linaro.org>
Cc: freedreno@lists.freedesktop.org, David Airlie <airlied@linux.ie>,
	linux-arm-msm@vger.kernel.org,
	Abhinav Kumar <quic_abhinavk@quicinc.com>,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
	Sean Paul <sean@poorly.run>
Subject: Re: [PATCH] drm/msm: Remove spurious IRQF_ONESHOT flags from dsi & hdmi
Date: Thu, 27 Jan 2022 23:04:44 +0300	[thread overview]
Message-ID: <CAA8EJppWF27As46rRvYgHuqX=dwna2CQGZ79WXdrfqFbAK53uw@mail.gmail.com> (raw)
In-Reply-To: <20220127170405.155710-1-daniel.thompson@linaro.org>

On Thu, 27 Jan 2022 at 20:04, Daniel Thompson
<daniel.thompson@linaro.org> wrote:
>
> Quoting the header comments, IRQF_ONESHOT is "Used by threaded interrupts
> which need to keep the irq line disabled until the threaded handler has
> been run.". When applied to an interrupt that doesn't request a threaded
> irq then IRQF_ONESHOT has a lesser known (undocumented?) side effect,
> which it to disable the forced threading of irqs (and for "normal" kernels
> it is a nop). In this case I can find no evidence that suppressing forced
> threading is intentional. Had it been intentional then a driver must adopt
> the raw_spinlock API in order to avoid deadlocks on PREEMPT_RT kernels
> (and avoid calling any kernel API that uses regular spinlocks).
>
> Fix this by removing the spurious additional flag.
>
> This change is required for my Snapdragon 7cx Gen2 tablet to boot-to-GUI
> with PREEMPT_RT enabled.
>
> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>

Could you please split it into two parts: separate DSI and HDMI patches

> ---
>
> Notes:
>     Just in case anybody asks, yes! I did use coccinelle to do a quick scan
>     for similar issues. I didn't find any other instances in drivers/drm/ .
>
>  drivers/gpu/drm/msm/dsi/dsi_host.c | 2 +-
>  drivers/gpu/drm/msm/hdmi/hdmi.c    | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index 6b3ced4aaaf5d..3a3f53f0c8ae1 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -1877,7 +1877,7 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi)
>
>         /* do not autoenable, will be enabled later */
>         ret = devm_request_irq(&pdev->dev, msm_host->irq, dsi_host_irq,
> -                       IRQF_TRIGGER_HIGH | IRQF_ONESHOT | IRQF_NO_AUTOEN,
> +                       IRQF_TRIGGER_HIGH | IRQF_NO_AUTOEN,
>                         "dsi_isr", msm_host);
>         if (ret < 0) {
>                 dev_err(&pdev->dev, "failed to request IRQ%u: %d\n",
> diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
> index 3acdeae25caf0..a1bfbc4c74bf7 100644
> --- a/drivers/gpu/drm/msm/hdmi/hdmi.c
> +++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
> @@ -301,7 +301,7 @@ int msm_hdmi_modeset_init(struct hdmi *hdmi,
>         }
>
>         ret = devm_request_irq(&pdev->dev, hdmi->irq,
> -                       msm_hdmi_irq, IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> +                       msm_hdmi_irq, IRQF_TRIGGER_HIGH,
>                         "hdmi_isr", hdmi);
>         if (ret < 0) {
>                 DRM_DEV_ERROR(dev->dev, "failed to request IRQ%u: %d\n",
>
> base-commit: e783362eb54cd99b2cac8b3a9aeac942e6f6ac07
> --
> 2.34.1
>


-- 
With best wishes
Dmitry

  reply	other threads:[~2022-01-27 20:04 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-27 17:04 [PATCH] drm/msm: Remove spurious IRQF_ONESHOT flags from dsi & hdmi Daniel Thompson
2022-01-27 17:04 ` Daniel Thompson
2022-01-27 20:04 ` Dmitry Baryshkov [this message]
2022-01-27 20:04   ` Dmitry Baryshkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAA8EJppWF27As46rRvYgHuqX=dwna2CQGZ79WXdrfqFbAK53uw@mail.gmail.com' \
    --to=dmitry.baryshkov@linaro.org \
    --cc=airlied@linux.ie \
    --cc=daniel.thompson@linaro.org \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=quic_abhinavk@quicinc.com \
    --cc=robdclark@gmail.com \
    --cc=sean@poorly.run \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.