* [Buildroot] glmark2 regression on mx6
@ 2017-04-20 22:32 Fabio Estevam
2017-04-21 8:19 ` Gary Bisson
0 siblings, 1 reply; 5+ messages in thread
From: Fabio Estevam @ 2017-04-20 22:32 UTC (permalink / raw)
To: buildroot
Hi Gary,
I have just tested glmark2 with Buildroot master on imx6 and I got the
following error:
# glmark2-es2-drm
** Failed to set swap interval. Results may be bounded above by refresh rate.
=======================================================
glmark2 2014.03
=======================================================
OpenGL Information
GL_VENDOR: etnaviv
GL_RENDERER: Gallium 0.4 on Vivante GC2000 rev 5108
GL_VERSION: OpenGL ES 2.0 Mesa 17.0.3
=======================================================
** Failed to set swap interval. Results may be bounded above by refresh rate.
[build] use-vbo=false:Segmentation fault
Before I start investigating this problem, I would like to know if you
have already seen this issue or if you have any suggestions.
Thanks,
Fabio Estevam
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] glmark2 regression on mx6
2017-04-20 22:32 [Buildroot] glmark2 regression on mx6 Fabio Estevam
@ 2017-04-21 8:19 ` Gary Bisson
2017-04-21 13:58 ` Fabio Estevam
0 siblings, 1 reply; 5+ messages in thread
From: Gary Bisson @ 2017-04-21 8:19 UTC (permalink / raw)
To: buildroot
Hi Fabio,
On Fri, Apr 21, 2017 at 12:32 AM, Fabio Estevam <festevam@gmail.com> wrote:
> Hi Gary,
>
> I have just tested glmark2 with Buildroot master on imx6 and I got the
> following error:
>
> # glmark2-es2-drm
> ** Failed to set swap interval. Results may be bounded above by refresh rate.
> =======================================================
> glmark2 2014.03
> =======================================================
> OpenGL Information
> GL_VENDOR: etnaviv
> GL_RENDERER: Gallium 0.4 on Vivante GC2000 rev 5108
> GL_VERSION: OpenGL ES 2.0 Mesa 17.0.3
Never tried Mesa 17.0.3. What's the kernel version you're using?
> =======================================================
> ** Failed to set swap interval. Results may be bounded above by refresh rate.
That swap interval message I've seen in the past (and discarded it).
> [build] use-vbo=false:Segmentation fault
Segfault however I've never seen. Is kmscube running fine with this setup?
> Before I start investigating this problem, I would like to know if you
> have already seen this issue or if you have any suggestions.
Does this happen for each test? Have you tried specifying one test like:
glmark2-es2-drm -b desktop:effect=shadow:windows=4:shadow-size=5
glmark2-es2-drm -b jellyfish
glmark2-es2-drm -b ideas
Is the segfault happening on each example above?
Other than this I don't have much suggestion except asking on IRC
(#etnaviv), the channel is very active lately (Android work).
Regards,
Gary
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] glmark2 regression on mx6
2017-04-21 8:19 ` Gary Bisson
@ 2017-04-21 13:58 ` Fabio Estevam
2017-05-31 3:53 ` mjp112
0 siblings, 1 reply; 5+ messages in thread
From: Fabio Estevam @ 2017-04-21 13:58 UTC (permalink / raw)
To: buildroot
Hi Gary,
On Fri, Apr 21, 2017 at 5:19 AM, Gary Bisson
<gary.bisson@boundarydevices.com> wrote:
> Never tried Mesa 17.0.3. What's the kernel version you're using?
Also tried Mesa 17.0.4 with the same result.
Tested kernels 4.9, 4.10 and 4.11-rc and the glmark2 segfault always happen.
>
>> =======================================================
>> ** Failed to set swap interval. Results may be bounded above by refresh rate.
>
> That swap interval message I've seen in the past (and discarded it).
>
>> [build] use-vbo=false:Segmentation fault
>
> Segfault however I've never seen. Is kmscube running fine with this setup?
>
>> Before I start investigating this problem, I would like to know if you
>> have already seen this issue or if you have any suggestions.
>
> Does this happen for each test? Have you tried specifying one test like:
> glmark2-es2-drm -b desktop:effect=shadow:windows=4:shadow-size=5
> glmark2-es2-drm -b jellyfish
> glmark2-es2-drm -b ideas
>
> Is the segfault happening on each example above?
Yes, it happens in all of these examples as well.
In the last case there is also some warnings before the segfault:
# glmark2-es2-drm -b ideas
** Failed to set swap interval. Results may be bounded above by refresh rate.
=======================================================
glmark2 2014.03
=======================================================
OpenGL Information
GL_VENDOR: etnaviv
GL_RENDERER: Gallium 0.4 on Vivante GC2000 rev 5108
GL_VERSION: OpenGL ES 2.0 Mesa 17.0.4
=======================================================
** Failed to set swap interval. Results may be bounded above by refresh rate.
[ideas] <default>:[ 79.619057] etnaviv-gpu 130000.gpu: hangcheck
detected gpu lockup!
[ 79.625325] etnaviv-gpu 130000.gpu: completed fence: 61
[ 79.631058] etnaviv-gpu 130000.gpu: active fence: 62
[ 79.637492] etnaviv-gpu 130000.gpu: hangcheck recover!
[ 83.116894] etnaviv-gpu 130000.gpu: hangcheck detected gpu lockup!
[ 83.123160] etnaviv-gpu 130000.gpu: completed fence: 62
[ 83.128892] etnaviv-gpu 130000.gpu: active fence: 63
[ 83.134440] etnaviv-gpu 130000.gpu: hangcheck recover!
Segmentation fault
> Other than this I don't have much suggestion except asking on IRC
> (#etnaviv), the channel is very active lately (Android work).
Will report to the etnaviv folks, thanks.
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] glmark2 regression on mx6
2017-04-21 13:58 ` Fabio Estevam
@ 2017-05-31 3:53 ` mjp112
2017-05-31 21:21 ` Fabio Estevam
0 siblings, 1 reply; 5+ messages in thread
From: mjp112 @ 2017-05-31 3:53 UTC (permalink / raw)
To: buildroot
I am seeing the exaclty same results..
My setup is : imx6q kernel 4.12-rc3 and
OpenGL Information
GL_VENDOR: etnaviv
GL_RENDERER: Gallium 0.4 on Vivante GC2000 rev 5108
GL_VERSION: OpenGL ES 2.0 Mesa 17.0.5
Any ideas what is causing this?
--
View this message in context: http://buildroot-busybox.2317881.n4.nabble.com/glmark2-regression-on-mx6-tp162973p166062.html
Sent from the Buildroot (busybox) mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] glmark2 regression on mx6
2017-05-31 3:53 ` mjp112
@ 2017-05-31 21:21 ` Fabio Estevam
0 siblings, 0 replies; 5+ messages in thread
From: Fabio Estevam @ 2017-05-31 21:21 UTC (permalink / raw)
To: buildroot
On Wed, May 31, 2017 at 12:53 AM, mjp112 <mika.penttila@gmail.com> wrote:
> I am seeing the exaclty same results..
>
> My setup is : imx6q kernel 4.12-rc3 and
> OpenGL Information
> GL_VENDOR: etnaviv
> GL_RENDERER: Gallium 0.4 on Vivante GC2000 rev 5108
> GL_VERSION: OpenGL ES 2.0 Mesa 17.0.5
>
> Any ideas what is causing this?
I haven't had a chance to debug this issue yet.
Could you please create a new thread reporting the problem to
etnaviv at lists.freedesktop.org and dri-devel at lists.freedesktop.org?
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2017-05-31 21:21 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-04-20 22:32 [Buildroot] glmark2 regression on mx6 Fabio Estevam
2017-04-21 8:19 ` Gary Bisson
2017-04-21 13:58 ` Fabio Estevam
2017-05-31 3:53 ` mjp112
2017-05-31 21:21 ` Fabio Estevam
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.