* [PATCH dev-5.1] ARM: dts: aspeed: Add Inspur fp5280g2 BMC machine
@ 2019-06-06 2:17 John Wang
2019-06-06 7:51 ` Lei YU
0 siblings, 1 reply; 4+ messages in thread
From: John Wang @ 2019-06-06 2:17 UTC (permalink / raw)
To: openbmc
The fp5280g2 is an open-power server platform with
an aspeed ast2500 BMC
Signed-off-by: John Wang <wangzqbj@inspur.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts | 843 +++++++++++++++++++++++
2 files changed, 844 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index bed2047..31db1d3 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1256,6 +1256,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-facebook-cmm.dtb \
aspeed-bmc-facebook-tiogapass.dtb \
aspeed-bmc-intel-s2600wf.dtb \
+ aspeed-bmc-inspur-fp5280g2.dtb \
aspeed-bmc-lenovo-hr630.dtb \
aspeed-bmc-microsoft-olympus.dtb \
aspeed-bmc-opp-lanyang.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
new file mode 100644
index 0000000..771de77
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
@@ -0,0 +1,843 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+ model = "FP5280G2 BMC";
+ compatible = "inspur,fp5280g2-bmc", "aspeed,ast2500";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vga_memory: framebuffer@9f000000 {
+ no-map;
+ reg = <0x9f000000 0x01000000>; /* 16M */
+ };
+
+ flash_memory: region@98000000 {
+ no-map;
+ reg = <0x98000000 0x04000000>; /* 64M */
+ };
+
+ coldfire_memory: codefire_memory@9ef00000 {
+ reg = <0x9ef00000 0x00100000>;
+ no-map;
+ };
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+
+ video_engine_memory: jpegbuffer {
+ size = <0x02000000>; /* 32M */
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ fsi: gpio-fsi {
+ compatible = "fsi-master-gpio", "fsi-master";
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-gpio-delays;
+
+ memory-region = <&coldfire_memory>;
+ aspeed,sram = <&sram>;
+ aspeed,cvic = <&cvic>;
+
+ clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+ data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
+ mux-gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+ trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ checkstop {
+ label = "checkstop";
+ gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(B, 3)>;
+ };
+
+ ps0-presence {
+ label = "ps0-presence";
+ gpios = <&gpio ASPEED_GPIO(F, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(F, 0)>;
+ };
+
+ ps1-presence {
+ label = "ps1-presence";
+ gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(F, 1)>;
+ };
+
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <1000>;
+
+ fan0-presence {
+ label = "fan0-presence";
+ gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
+ linux,code = <0>;
+ };
+
+ fan1-presence {
+ label = "fan1-presence";
+ gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
+ linux,code = <1>;
+ };
+
+ fan2-presence {
+ label = "fan2-presence";
+ gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
+ linux,code = <2>;
+ };
+
+ fan3-presence {
+ label = "fan3-presence";
+ gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
+ linux,code = <3>;
+ };
+
+ fan4-presence {
+ label = "fan4-presence";
+ gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
+ linux,code = <4>;
+ };
+
+ fan5-presence {
+ label = "fan5-presence";
+ gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
+ linux,code = <5>;
+ };
+
+ fan6-presence {
+ label = "fan6-presence";
+ gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <6>;
+ };
+
+ fan7-presence {
+ label = "fan7-presence";
+ gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
+ linux,code = <7>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "power";
+ /* TODO: dummy gpio */
+ gpios = <&gpio ASPEED_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+ };
+
+ };
+
+ iio-hwmon-battery {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 15>;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+ <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+ <&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>;
+ };
+
+};
+
+&fmc {
+ status = "okay";
+
+ flash@0 {
+ status = "okay";
+ label = "bmc";
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash@0 {
+ status = "okay";
+ label = "pnor";
+ m25p,fast-read;
+ spi-max-frequency = <100000000>;
+ };
+};
+
+&uart1 {
+ /* Rear RS-232 connector */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default
+ &pinctrl_nrts1_default
+ &pinctrl_ndtr1_default
+ &pinctrl_ndsr1_default
+ &pinctrl_ncts1_default
+ &pinctrl_ndcd1_default
+ &pinctrl_nri1_default>;
+};
+
+&uart2 {
+ /* Test Point */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart3 {
+ /* APSS */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+ flash = <&spi1>;
+};
+
+&mbox {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ use-ncsi;
+};
+
+&mac1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+ /* LCD */
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ label = "fru";
+ };
+
+};
+
+&i2c2 {
+ status = "okay";
+
+ tmp112@48 {
+ compatible = "ti,tmp112";
+ reg = <0x48>;
+ label = "inlet";
+ };
+
+ tmp112@49 {
+ compatible = "ti,tmp112";
+ reg = <0x49>;
+ label = "outlet";
+ };
+
+ i2c-switch@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ tmp112@4a {
+ compatible = "ti,tmp112";
+ reg = <0x4a>;
+ label = "psu_inlet";
+ };
+
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ tmp112@4a {
+ compatible = "ti,tmp112";
+ reg = <0x4a>;
+ label = "ocp_zone";
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ tmp112@4a {
+ compatible = "ti,tmp112";
+ reg = <0x4a>;
+ label = "bmc_zone";
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ tmp112@7c {
+ compatible = "emc1413";
+ reg = <0x7c>;
+ };
+ };
+
+ };
+};
+
+&i2c3 {
+ /* Riser Card */
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+
+ rtc@68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ };
+};
+
+&i2c5 {
+ /* vr */
+ status = "okay";
+};
+
+&i2c6 {
+ /* bp card */
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+
+ i2c-switch@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ adm1278@10 {
+ compatible = "adi,adm1278";
+ reg = <0x10>;
+ };
+
+ adm1278@13 {
+ compatible = "adi,adm1278";
+ reg = <0x13>;
+ };
+
+ adm1278@50 {
+ compatible = "adi,adm1278";
+ reg = <0x50>;
+ };
+
+ adm1278@53 {
+ compatible = "adi,adm1278";
+ reg = <0x53>;
+ };
+
+ };
+
+ /*pcie riser*/
+
+ };
+};
+
+&i2c8 {
+ status = "okay";
+
+ pca0: pca9555@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ };
+
+ pca1: pca9555@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ pca2: pca9555@22 {
+ compatible = "nxp,pca9555";
+ reg = <0x22>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ pca3: pca9555@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ pca4: pca9555@24 {
+ compatible = "nxp,pca9555";
+ reg = <0x24>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ pca5: pca9555@25 {
+ compatible = "nxp,pca9555";
+ reg = <0x25>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+};
+
+&i2c9 {
+ /* cpld */
+ status = "okay";
+};
+
+&i2c10 {
+ /* hdd bp */
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+
+ power-supply@58 {
+ compatible = "pmbus";
+ reg = <0x58>;
+ };
+
+ power-supply@5a {
+ compatible = "pmbus";
+ reg = <0x5a>;
+ };
+};
+
+&i2c12 {
+ /* odcc */
+ status = "okay";
+};
+
+&vuart {
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+ memory-region = <&gfx_memory>;
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&gpio {
+ pin_gpio_b7 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(B,7) GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "BMC_INIT_OK";
+ };
+};
+
+&wdt1 {
+ aspeed,reset-type = "none";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&ibt {
+ status = "okay";
+
+};
+
+&adc {
+ status = "okay";
+};
+
+&vhub {
+ status = "okay";
+};
+
+&video {
+ status = "okay";
+ memory-region = <&video_engine_memory>;
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+ &pinctrl_pwm2_default &pinctrl_pwm3_default
+ &pinctrl_pwm4_default &pinctrl_pwm5_default
+ &pinctrl_pwm6_default &pinctrl_pwm7_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+ };
+
+ fan@1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+ };
+
+ fan@2 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+ };
+
+ fan@3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+ };
+
+ fan@4 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
+ };
+
+ fan@5 {
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
+ };
+
+ fan@6 {
+ reg = <0x06>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
+ };
+
+ fan@7 {
+ reg = <0x07>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
+ };
+
+};
+
+#include "ibm-power9-dual.dtsi"
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH dev-5.1] ARM: dts: aspeed: Add Inspur fp5280g2 BMC machine
2019-06-06 2:17 [PATCH dev-5.1] ARM: dts: aspeed: Add Inspur fp5280g2 BMC machine John Wang
@ 2019-06-06 7:51 ` Lei YU
2019-06-12 2:19 ` Andrew Jeffery
0 siblings, 1 reply; 4+ messages in thread
From: Lei YU @ 2019-06-06 7:51 UTC (permalink / raw)
To: John Wang; +Cc: OpenBMC Maillist
Reviewed-by: Lei YU <mine260309@gmail.com>
On Thu, Jun 6, 2019 at 10:18 AM John Wang <wangzqbj@inspur.com> wrote:
>
> The fp5280g2 is an open-power server platform with
> an aspeed ast2500 BMC
>
> Signed-off-by: John Wang <wangzqbj@inspur.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts | 843 +++++++++++++++++++++++
> 2 files changed, 844 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index bed2047..31db1d3 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1256,6 +1256,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> aspeed-bmc-facebook-cmm.dtb \
> aspeed-bmc-facebook-tiogapass.dtb \
> aspeed-bmc-intel-s2600wf.dtb \
> + aspeed-bmc-inspur-fp5280g2.dtb \
> aspeed-bmc-lenovo-hr630.dtb \
> aspeed-bmc-microsoft-olympus.dtb \
> aspeed-bmc-opp-lanyang.dtb \
> diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
> new file mode 100644
> index 0000000..771de77
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
> @@ -0,0 +1,843 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/dts-v1/;
> +#include "aspeed-g5.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +#include <dt-bindings/leds/leds-pca955x.h>
> +
> +/ {
> + model = "FP5280G2 BMC";
> + compatible = "inspur,fp5280g2-bmc", "aspeed,ast2500";
> +
> + chosen {
> + stdout-path = &uart5;
> + bootargs = "console=ttyS4,115200 earlyprintk";
> + };
> +
> + memory@80000000 {
> + reg = <0x80000000 0x20000000>;
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + vga_memory: framebuffer@9f000000 {
> + no-map;
> + reg = <0x9f000000 0x01000000>; /* 16M */
> + };
> +
> + flash_memory: region@98000000 {
> + no-map;
> + reg = <0x98000000 0x04000000>; /* 64M */
> + };
> +
> + coldfire_memory: codefire_memory@9ef00000 {
> + reg = <0x9ef00000 0x00100000>;
> + no-map;
> + };
> +
> + gfx_memory: framebuffer {
> + size = <0x01000000>;
> + alignment = <0x01000000>;
> + compatible = "shared-dma-pool";
> + reusable;
> + };
> +
> + video_engine_memory: jpegbuffer {
> + size = <0x02000000>; /* 32M */
> + alignment = <0x01000000>;
> + compatible = "shared-dma-pool";
> + reusable;
> + };
> + };
> +
> + fsi: gpio-fsi {
> + compatible = "fsi-master-gpio", "fsi-master";
> + #address-cells = <2>;
> + #size-cells = <0>;
> + no-gpio-delays;
> +
> + memory-region = <&coldfire_memory>;
> + aspeed,sram = <&sram>;
> + aspeed,cvic = <&cvic>;
> +
> + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
> + data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
> + mux-gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_HIGH>;
> + enable-gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
> + trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + checkstop {
> + label = "checkstop";
> + gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(B, 3)>;
> + };
> +
> + ps0-presence {
> + label = "ps0-presence";
> + gpios = <&gpio ASPEED_GPIO(F, 0) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(F, 0)>;
> + };
> +
> + ps1-presence {
> + label = "ps1-presence";
> + gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(F, 1)>;
> + };
> +
> + };
> +
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + poll-interval = <1000>;
> +
> + fan0-presence {
> + label = "fan0-presence";
> + gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
> + linux,code = <0>;
> + };
> +
> + fan1-presence {
> + label = "fan1-presence";
> + gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
> + linux,code = <1>;
> + };
> +
> + fan2-presence {
> + label = "fan2-presence";
> + gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
> + linux,code = <2>;
> + };
> +
> + fan3-presence {
> + label = "fan3-presence";
> + gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
> + linux,code = <3>;
> + };
> +
> + fan4-presence {
> + label = "fan4-presence";
> + gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
> + linux,code = <4>;
> + };
> +
> + fan5-presence {
> + label = "fan5-presence";
> + gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
> + linux,code = <5>;
> + };
> +
> + fan6-presence {
> + label = "fan6-presence";
> + gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
> + linux,code = <6>;
> + };
> +
> + fan7-presence {
> + label = "fan7-presence";
> + gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
> + linux,code = <7>;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + power {
> + label = "power";
> + /* TODO: dummy gpio */
> + gpios = <&gpio ASPEED_GPIO(R, 1) GPIO_ACTIVE_LOW>;
> + };
> +
> + };
> +
> + iio-hwmon-battery {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 15>;
> + };
> +
> + iio-hwmon {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
> + <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
> + <&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>;
> + };
> +
> +};
> +
> +&fmc {
> + status = "okay";
> +
> + flash@0 {
> + status = "okay";
> + label = "bmc";
> + m25p,fast-read;
> + spi-max-frequency = <50000000>;
> +#include "openbmc-flash-layout.dtsi"
> + };
> +};
> +
> +&spi1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi1_default>;
> +
> + flash@0 {
> + status = "okay";
> + label = "pnor";
> + m25p,fast-read;
> + spi-max-frequency = <100000000>;
> + };
> +};
> +
> +&uart1 {
> + /* Rear RS-232 connector */
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_txd1_default
> + &pinctrl_rxd1_default
> + &pinctrl_nrts1_default
> + &pinctrl_ndtr1_default
> + &pinctrl_ndsr1_default
> + &pinctrl_ncts1_default
> + &pinctrl_ndcd1_default
> + &pinctrl_nri1_default>;
> +};
> +
> +&uart2 {
> + /* Test Point */
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
> +};
> +
> +&uart3 {
> + /* APSS */
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
> +};
> +
> +&uart5 {
> + status = "okay";
> +};
> +
> +&lpc_ctrl {
> + status = "okay";
> + memory-region = <&flash_memory>;
> + flash = <&spi1>;
> +};
> +
> +&mbox {
> + status = "okay";
> +};
> +
> +&mac0 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rmii1_default>;
> + use-ncsi;
> +};
> +
> +&mac1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
> +};
> +
> +&i2c0 {
> + /* LCD */
> + status = "okay";
> +};
> +
> +&i2c1 {
> + status = "okay";
> +
> + eeprom@50 {
> + compatible = "atmel,24c256";
> + reg = <0x50>;
> + label = "fru";
> + };
> +
> +};
> +
> +&i2c2 {
> + status = "okay";
> +
> + tmp112@48 {
> + compatible = "ti,tmp112";
> + reg = <0x48>;
> + label = "inlet";
> + };
> +
> + tmp112@49 {
> + compatible = "ti,tmp112";
> + reg = <0x49>;
> + label = "outlet";
> + };
> +
> + i2c-switch@70 {
> + compatible = "nxp,pca9546";
> + reg = <0x70>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + i2c@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> +
> + tmp112@4a {
> + compatible = "ti,tmp112";
> + reg = <0x4a>;
> + label = "psu_inlet";
> + };
> +
> + };
> +
> + i2c@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> +
> + tmp112@4a {
> + compatible = "ti,tmp112";
> + reg = <0x4a>;
> + label = "ocp_zone";
> + };
> + };
> +
> + i2c@2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <2>;
> +
> + tmp112@4a {
> + compatible = "ti,tmp112";
> + reg = <0x4a>;
> + label = "bmc_zone";
> + };
> + };
> +
> + i2c@3 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <3>;
> +
> + tmp112@7c {
> + compatible = "emc1413";
> + reg = <0x7c>;
> + };
> + };
> +
> + };
> +};
> +
> +&i2c3 {
> + /* Riser Card */
> + status = "okay";
> +};
> +
> +&i2c4 {
> + status = "okay";
> +
> + rtc@68 {
> + compatible = "dallas,ds3232";
> + reg = <0x68>;
> + };
> +};
> +
> +&i2c5 {
> + /* vr */
> + status = "okay";
> +};
> +
> +&i2c6 {
> + /* bp card */
> + status = "okay";
> +};
> +
> +&i2c7 {
> + status = "okay";
> +
> + i2c-switch@70 {
> + compatible = "nxp,pca9546";
> + reg = <0x70>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + i2c@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> +
> + adm1278@10 {
> + compatible = "adi,adm1278";
> + reg = <0x10>;
> + };
> +
> + adm1278@13 {
> + compatible = "adi,adm1278";
> + reg = <0x13>;
> + };
> +
> + adm1278@50 {
> + compatible = "adi,adm1278";
> + reg = <0x50>;
> + };
> +
> + adm1278@53 {
> + compatible = "adi,adm1278";
> + reg = <0x53>;
> + };
> +
> + };
> +
> + /*pcie riser*/
> +
> + };
> +};
> +
> +&i2c8 {
> + status = "okay";
> +
> + pca0: pca9555@20 {
> + compatible = "nxp,pca9555";
> + reg = <0x20>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio@0 {
> + reg = <0>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@1 {
> + reg = <1>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@2 {
> + reg = <2>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@3 {
> + reg = <3>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@4 {
> + reg = <4>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@5 {
> + reg = <5>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@6 {
> + reg = <6>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@7 {
> + reg = <7>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + };
> +
> + pca1: pca9555@21 {
> + compatible = "nxp,pca9555";
> + reg = <0x21>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio@0 {
> + reg = <0>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@1 {
> + reg = <1>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@2 {
> + reg = <2>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@3 {
> + reg = <3>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@4 {
> + reg = <4>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@5 {
> + reg = <5>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@6 {
> + reg = <6>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@7 {
> + reg = <7>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + };
> +
> + pca2: pca9555@22 {
> + compatible = "nxp,pca9555";
> + reg = <0x22>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio@0 {
> + reg = <0>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@1 {
> + reg = <1>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@2 {
> + reg = <2>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@3 {
> + reg = <3>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@4 {
> + reg = <4>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@5 {
> + reg = <5>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@6 {
> + reg = <6>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@7 {
> + reg = <7>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + };
> +
> + pca3: pca9555@23 {
> + compatible = "nxp,pca9555";
> + reg = <0x23>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio@0 {
> + reg = <0>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@1 {
> + reg = <1>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@2 {
> + reg = <2>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@3 {
> + reg = <3>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@4 {
> + reg = <4>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@5 {
> + reg = <5>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@6 {
> + reg = <6>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@7 {
> + reg = <7>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + };
> +
> + pca4: pca9555@24 {
> + compatible = "nxp,pca9555";
> + reg = <0x24>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio@0 {
> + reg = <0>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@1 {
> + reg = <1>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@2 {
> + reg = <2>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@3 {
> + reg = <3>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@4 {
> + reg = <4>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@5 {
> + reg = <5>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@6 {
> + reg = <6>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@7 {
> + reg = <7>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + };
> +
> + pca5: pca9555@25 {
> + compatible = "nxp,pca9555";
> + reg = <0x25>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio@0 {
> + reg = <0>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@1 {
> + reg = <1>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@2 {
> + reg = <2>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@3 {
> + reg = <3>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@4 {
> + reg = <4>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@5 {
> + reg = <5>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@6 {
> + reg = <6>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@7 {
> + reg = <7>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + };
> +
> +};
> +
> +&i2c9 {
> + /* cpld */
> + status = "okay";
> +};
> +
> +&i2c10 {
> + /* hdd bp */
> + status = "okay";
> +};
> +
> +&i2c11 {
> + status = "okay";
> +
> + power-supply@58 {
> + compatible = "pmbus";
> + reg = <0x58>;
> + };
> +
> + power-supply@5a {
> + compatible = "pmbus";
> + reg = <0x5a>;
> + };
> +};
> +
> +&i2c12 {
> + /* odcc */
> + status = "okay";
> +};
> +
> +&vuart {
> + status = "okay";
> +};
> +
> +&gfx {
> + status = "okay";
> + memory-region = <&gfx_memory>;
> +};
> +
> +&pinctrl {
> + aspeed,external-nodes = <&gfx &lhc>;
> +};
> +
> +&gpio {
> + pin_gpio_b7 {
> + gpio-hog;
> + gpios = <ASPEED_GPIO(B,7) GPIO_ACTIVE_LOW>;
> + output-high;
> + line-name = "BMC_INIT_OK";
> + };
> +};
> +
> +&wdt1 {
> + aspeed,reset-type = "none";
> + aspeed,external-signal;
> + aspeed,ext-push-pull;
> + aspeed,ext-active-high;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wdtrst1_default>;
> +};
> +
> +&ibt {
> + status = "okay";
> +
> +};
> +
> +&adc {
> + status = "okay";
> +};
> +
> +&vhub {
> + status = "okay";
> +};
> +
> +&video {
> + status = "okay";
> + memory-region = <&video_engine_memory>;
> +};
> +
> +&pwm_tacho {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
> + &pinctrl_pwm2_default &pinctrl_pwm3_default
> + &pinctrl_pwm4_default &pinctrl_pwm5_default
> + &pinctrl_pwm6_default &pinctrl_pwm7_default>;
> +
> + fan@0 {
> + reg = <0x00>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
> + };
> +
> + fan@1 {
> + reg = <0x01>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
> + };
> +
> + fan@2 {
> + reg = <0x02>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
> + };
> +
> + fan@3 {
> + reg = <0x03>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
> + };
> +
> + fan@4 {
> + reg = <0x04>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
> + };
> +
> + fan@5 {
> + reg = <0x05>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
> + };
> +
> + fan@6 {
> + reg = <0x06>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
> + };
> +
> + fan@7 {
> + reg = <0x07>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
> + };
> +
> +};
> +
> +#include "ibm-power9-dual.dtsi"
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH dev-5.1] ARM: dts: aspeed: Add Inspur fp5280g2 BMC machine
2019-06-06 7:51 ` Lei YU
@ 2019-06-12 2:19 ` Andrew Jeffery
2019-06-12 8:49 ` John Wang
0 siblings, 1 reply; 4+ messages in thread
From: Andrew Jeffery @ 2019-06-12 2:19 UTC (permalink / raw)
To: Mine, John Wang; +Cc: OpenBMC Maillist
Hi John,
On Thu, 6 Jun 2019, at 17:22, Lei YU wrote:
> Reviewed-by: Lei YU <mine260309@gmail.com>
>
> On Thu, Jun 6, 2019 at 10:18 AM John Wang <wangzqbj@inspur.com> wrote:
> >
> > The fp5280g2 is an open-power server platform with
> > an aspeed ast2500 BMC
> >
> > Signed-off-by: John Wang <wangzqbj@inspur.com>
> > ---
> > arch/arm/boot/dts/Makefile | 1 +
> > arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts | 843 +++++++++++++++++++++++
> > 2 files changed, 844 insertions(+)
> > create mode 100644 arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
> >
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index bed2047..31db1d3 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -1256,6 +1256,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> > aspeed-bmc-facebook-cmm.dtb \
> > aspeed-bmc-facebook-tiogapass.dtb \
> > aspeed-bmc-intel-s2600wf.dtb \
> > + aspeed-bmc-inspur-fp5280g2.dtb \
> > aspeed-bmc-lenovo-hr630.dtb \
> > aspeed-bmc-microsoft-olympus.dtb \
> > aspeed-bmc-opp-lanyang.dtb \
> > diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
> > new file mode 100644
> > index 0000000..771de77
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
> > @@ -0,0 +1,843 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/dts-v1/;
> > +#include "aspeed-g5.dtsi"
> > +#include <dt-bindings/gpio/aspeed-gpio.h>
> > +#include <dt-bindings/leds/leds-pca955x.h>
> > +
> > +/ {
> > + model = "FP5280G2 BMC";
> > + compatible = "inspur,fp5280g2-bmc", "aspeed,ast2500";
> > +
> > + chosen {
> > + stdout-path = &uart5;
> > + bootargs = "console=ttyS4,115200 earlyprintk";
> > + };
> > +
> > + memory@80000000 {
> > + reg = <0x80000000 0x20000000>;
> > + };
> > +
> > + reserved-memory {
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges;
> > +
> > + vga_memory: framebuffer@9f000000 {
> > + no-map;
> > + reg = <0x9f000000 0x01000000>; /* 16M */
> > + };
> > +
> > + flash_memory: region@98000000 {
> > + no-map;
> > + reg = <0x98000000 0x04000000>; /* 64M */
> > + };
> > +
> > + coldfire_memory: codefire_memory@9ef00000 {
> > + reg = <0x9ef00000 0x00100000>;
> > + no-map;
> > + };
> > +
> > + gfx_memory: framebuffer {
> > + size = <0x01000000>;
> > + alignment = <0x01000000>;
> > + compatible = "shared-dma-pool";
> > + reusable;
> > + };
> > +
> > + video_engine_memory: jpegbuffer {
> > + size = <0x02000000>; /* 32M */
> > + alignment = <0x01000000>;
> > + compatible = "shared-dma-pool";
> > + reusable;
> > + };
> > + };
> > +
> > + fsi: gpio-fsi {
> > + compatible = "fsi-master-gpio", "fsi-master";
> > + #address-cells = <2>;
> > + #size-cells = <0>;
> > + no-gpio-delays;
> > +
> > + memory-region = <&coldfire_memory>;
> > + aspeed,sram = <&sram>;
> > + aspeed,cvic = <&cvic>;
> > +
> > + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
> > + data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
> > + mux-gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_HIGH>;
> > + enable-gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
> > + trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
> > + };
> > +
> > + gpio-keys {
> > + compatible = "gpio-keys";
> > +
> > + checkstop {
> > + label = "checkstop";
> > + gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
> > + linux,code = <ASPEED_GPIO(B, 3)>;
> > + };
> > +
> > + ps0-presence {
> > + label = "ps0-presence";
> > + gpios = <&gpio ASPEED_GPIO(F, 0) GPIO_ACTIVE_LOW>;
> > + linux,code = <ASPEED_GPIO(F, 0)>;
> > + };
> > +
> > + ps1-presence {
> > + label = "ps1-presence";
> > + gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
> > + linux,code = <ASPEED_GPIO(F, 1)>;
> > + };
> > +
> > + };
> > +
> > + gpio-keys-polled {
> > + compatible = "gpio-keys-polled";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + poll-interval = <1000>;
> > +
> > + fan0-presence {
> > + label = "fan0-presence";
> > + gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
> > + linux,code = <0>;
> > + };
> > +
> > + fan1-presence {
> > + label = "fan1-presence";
> > + gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
> > + linux,code = <1>;
> > + };
> > +
> > + fan2-presence {
> > + label = "fan2-presence";
> > + gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
> > + linux,code = <2>;
> > + };
> > +
> > + fan3-presence {
> > + label = "fan3-presence";
> > + gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
> > + linux,code = <3>;
> > + };
> > +
> > + fan4-presence {
> > + label = "fan4-presence";
> > + gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
> > + linux,code = <4>;
> > + };
> > +
> > + fan5-presence {
> > + label = "fan5-presence";
> > + gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
> > + linux,code = <5>;
> > + };
> > +
> > + fan6-presence {
> > + label = "fan6-presence";
> > + gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
> > + linux,code = <6>;
> > + };
> > +
> > + fan7-presence {
> > + label = "fan7-presence";
> > + gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
> > + linux,code = <7>;
> > + };
> > + };
> > +
> > + leds {
> > + compatible = "gpio-leds";
> > +
> > + power {
> > + label = "power";
> > + /* TODO: dummy gpio */
> > + gpios = <&gpio ASPEED_GPIO(R, 1) GPIO_ACTIVE_LOW>;
> > + };
> > +
> > + };
> > +
> > + iio-hwmon-battery {
> > + compatible = "iio-hwmon";
> > + io-channels = <&adc 15>;
> > + };
> > +
> > + iio-hwmon {
> > + compatible = "iio-hwmon";
> > + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
> > + <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
> > + <&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>;
> > + };
> > +
> > +};
> > +
> > +&fmc {
> > + status = "okay";
> > +
> > + flash@0 {
> > + status = "okay";
> > + label = "bmc";
> > + m25p,fast-read;
> > + spi-max-frequency = <50000000>;
> > +#include "openbmc-flash-layout.dtsi"
> > + };
> > +};
> > +
> > +&spi1 {
> > + status = "okay";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_spi1_default>;
> > +
> > + flash@0 {
> > + status = "okay";
> > + label = "pnor";
> > + m25p,fast-read;
> > + spi-max-frequency = <100000000>;
> > + };
> > +};
> > +
> > +&uart1 {
> > + /* Rear RS-232 connector */
> > + status = "okay";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_txd1_default
> > + &pinctrl_rxd1_default
> > + &pinctrl_nrts1_default
> > + &pinctrl_ndtr1_default
> > + &pinctrl_ndsr1_default
> > + &pinctrl_ncts1_default
> > + &pinctrl_ndcd1_default
> > + &pinctrl_nri1_default>;
> > +};
> > +
> > +&uart2 {
> > + /* Test Point */
> > + status = "okay";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
> > +};
> > +
> > +&uart3 {
> > + /* APSS */
> > + status = "okay";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
> > +};
> > +
> > +&uart5 {
> > + status = "okay";
> > +};
> > +
> > +&lpc_ctrl {
> > + status = "okay";
> > + memory-region = <&flash_memory>;
> > + flash = <&spi1>;
> > +};
> > +
> > +&mbox {
> > + status = "okay";
Are you sure this is necessary? We're planning to drop mbox support in the near
future, so just want to make sure you're aware of that.
> > +};
> > +
> > +&mac0 {
> > + status = "okay";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_rmii1_default>;
> > + use-ncsi;
> > +};
> > +
> > +&mac1 {
> > + status = "okay";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
> > +};
> > +
> > +&i2c0 {
> > + /* LCD */
> > + status = "okay";
> > +};
> > +
> > +&i2c1 {
> > + status = "okay";
> > +
> > + eeprom@50 {
> > + compatible = "atmel,24c256";
> > + reg = <0x50>;
> > + label = "fru";
> > + };
> > +
> > +};
> > +
> > +&i2c2 {
> > + status = "okay";
> > +
> > + tmp112@48 {
> > + compatible = "ti,tmp112";
> > + reg = <0x48>;
> > + label = "inlet";
> > + };
> > +
> > + tmp112@49 {
> > + compatible = "ti,tmp112";
> > + reg = <0x49>;
> > + label = "outlet";
> > + };
> > +
> > + i2c-switch@70 {
> > + compatible = "nxp,pca9546";
> > + reg = <0x70>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + i2c@0 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <0>;
> > +
> > + tmp112@4a {
> > + compatible = "ti,tmp112";
> > + reg = <0x4a>;
> > + label = "psu_inlet";
> > + };
> > +
> > + };
> > +
> > + i2c@1 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <1>;
> > +
> > + tmp112@4a {
> > + compatible = "ti,tmp112";
> > + reg = <0x4a>;
> > + label = "ocp_zone";
> > + };
> > + };
> > +
> > + i2c@2 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <2>;
> > +
> > + tmp112@4a {
> > + compatible = "ti,tmp112";
> > + reg = <0x4a>;
> > + label = "bmc_zone";
> > + };
> > + };
> > +
> > + i2c@3 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <3>;
> > +
> > + tmp112@7c {
> > + compatible = "emc1413";
Should have a "microchip," prefix?
> > + reg = <0x7c>;
> > + };
> > + };
> > +
> > + };
> > +};
> > +
> > +&i2c3 {
> > + /* Riser Card */
> > + status = "okay";
> > +};
> > +
> > +&i2c4 {
> > + status = "okay";
> > +
> > + rtc@68 {
> > + compatible = "dallas,ds3232";
> > + reg = <0x68>;
> > + };
> > +};
> > +
> > +&i2c5 {
> > + /* vr */
> > + status = "okay";
> > +};
> > +
> > +&i2c6 {
> > + /* bp card */
> > + status = "okay";
> > +};
> > +
> > +&i2c7 {
> > + status = "okay";
> > +
> > + i2c-switch@70 {
> > + compatible = "nxp,pca9546";
> > + reg = <0x70>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + i2c@0 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <0>;
> > +
> > + adm1278@10 {
> > + compatible = "adi,adm1278";
> > + reg = <0x10>;
> > + };
> > +
> > + adm1278@13 {
> > + compatible = "adi,adm1278";
> > + reg = <0x13>;
> > + };
> > +
> > + adm1278@50 {
> > + compatible = "adi,adm1278";
> > + reg = <0x50>;
> > + };
> > +
> > + adm1278@53 {
> > + compatible = "adi,adm1278";
> > + reg = <0x53>;
> > + };
> > +
> > + };
> > +
> > + /*pcie riser*/
> > +
> > + };
> > +};
> > +
> > +&i2c8 {
> > + status = "okay";
> > +
> > + pca0: pca9555@20 {
> > + compatible = "nxp,pca9555";
> > + reg = <0x20>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + gpio@0 {
> > + reg = <0>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@1 {
> > + reg = <1>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@2 {
> > + reg = <2>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@3 {
> > + reg = <3>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@4 {
> > + reg = <4>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@5 {
> > + reg = <5>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@6 {
> > + reg = <6>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@7 {
> > + reg = <7>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + };
> > +
> > + pca1: pca9555@21 {
> > + compatible = "nxp,pca9555";
> > + reg = <0x21>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + gpio@0 {
> > + reg = <0>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@1 {
> > + reg = <1>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@2 {
> > + reg = <2>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@3 {
> > + reg = <3>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@4 {
> > + reg = <4>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@5 {
> > + reg = <5>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@6 {
> > + reg = <6>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@7 {
> > + reg = <7>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > + };
> > +
> > + pca2: pca9555@22 {
> > + compatible = "nxp,pca9555";
> > + reg = <0x22>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + gpio@0 {
> > + reg = <0>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@1 {
> > + reg = <1>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@2 {
> > + reg = <2>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@3 {
> > + reg = <3>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@4 {
> > + reg = <4>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@5 {
> > + reg = <5>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@6 {
> > + reg = <6>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@7 {
> > + reg = <7>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > + };
> > +
> > + pca3: pca9555@23 {
> > + compatible = "nxp,pca9555";
> > + reg = <0x23>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + gpio@0 {
> > + reg = <0>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@1 {
> > + reg = <1>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@2 {
> > + reg = <2>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@3 {
> > + reg = <3>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@4 {
> > + reg = <4>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@5 {
> > + reg = <5>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@6 {
> > + reg = <6>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@7 {
> > + reg = <7>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > + };
> > +
> > + pca4: pca9555@24 {
> > + compatible = "nxp,pca9555";
> > + reg = <0x24>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + gpio@0 {
> > + reg = <0>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@1 {
> > + reg = <1>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@2 {
> > + reg = <2>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@3 {
> > + reg = <3>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@4 {
> > + reg = <4>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@5 {
> > + reg = <5>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@6 {
> > + reg = <6>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@7 {
> > + reg = <7>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > + };
> > +
> > + pca5: pca9555@25 {
> > + compatible = "nxp,pca9555";
> > + reg = <0x25>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + gpio@0 {
> > + reg = <0>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@1 {
> > + reg = <1>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@2 {
> > + reg = <2>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@3 {
> > + reg = <3>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@4 {
> > + reg = <4>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@5 {
> > + reg = <5>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@6 {
> > + reg = <6>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio@7 {
> > + reg = <7>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > + };
> > +
> > +};
> > +
> > +&i2c9 {
> > + /* cpld */
> > + status = "okay";
> > +};
> > +
> > +&i2c10 {
> > + /* hdd bp */
> > + status = "okay";
> > +};
> > +
> > +&i2c11 {
> > + status = "okay";
> > +
> > + power-supply@58 {
> > + compatible = "pmbus";
> > + reg = <0x58>;
> > + };
> > +
> > + power-supply@5a {
> > + compatible = "pmbus";
> > + reg = <0x5a>;
> > + };
> > +};
> > +
> > +&i2c12 {
> > + /* odcc */
> > + status = "okay";
> > +};
> > +
> > +&vuart {
> > + status = "okay";
> > +};
> > +
> > +&gfx {
> > + status = "okay";
> > + memory-region = <&gfx_memory>;
> > +};
> > +
> > +&pinctrl {
> > + aspeed,external-nodes = <&gfx &lhc>;
> > +};
> > +
> > +&gpio {
> > + pin_gpio_b7 {
> > + gpio-hog;
> > + gpios = <ASPEED_GPIO(B,7) GPIO_ACTIVE_LOW>;
> > + output-high;
> > + line-name = "BMC_INIT_OK";
> > + };
> > +};
> > +
> > +&wdt1 {
> > + aspeed,reset-type = "none";
> > + aspeed,external-signal;
> > + aspeed,ext-push-pull;
> > + aspeed,ext-active-high;
> > +
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_wdtrst1_default>;
> > +};
> > +
> > +&ibt {
> > + status = "okay";
> > +
> > +};
> > +
> > +&adc {
> > + status = "okay";
Please add the pinctrl properties to mux the necessary ADC lines which you have
associated with the iio-hwmon bridge (you've used lines 0-14).
Cheers,
Andrew
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH dev-5.1] ARM: dts: aspeed: Add Inspur fp5280g2 BMC machine
2019-06-12 2:19 ` Andrew Jeffery
@ 2019-06-12 8:49 ` John Wang
0 siblings, 0 replies; 4+ messages in thread
From: John Wang @ 2019-06-12 8:49 UTC (permalink / raw)
To: Andrew Jeffery; +Cc: Mine, OpenBMC Maillist
On Wed, Jun 12, 2019 at 10:20 AM Andrew Jeffery <andrew@aj.id.au> wrote:
>
> Hi John,
>
> On Thu, 6 Jun 2019, at 17:22, Lei YU wrote:
> > Reviewed-by: Lei YU <mine260309@gmail.com>
> >
> > On Thu, Jun 6, 2019 at 10:18 AM John Wang <wangzqbj@inspur.com> wrote:
> > >
> > > The fp5280g2 is an open-power server platform with
> > > an aspeed ast2500 BMC
> > >
> > > Signed-off-by: John Wang <wangzqbj@inspur.com>
> > > ---
> > > arch/arm/boot/dts/Makefile | 1 +
> > > arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts | 843 +++++++++++++++++++++++
> > > 2 files changed, 844 insertions(+)
> > > create mode 100644 arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
> > >
> > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > > index bed2047..31db1d3 100644
> > > --- a/arch/arm/boot/dts/Makefile
> > > +++ b/arch/arm/boot/dts/Makefile
> > > @@ -1256,6 +1256,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> > > aspeed-bmc-facebook-cmm.dtb \
> > > aspeed-bmc-facebook-tiogapass.dtb \
> > > aspeed-bmc-intel-s2600wf.dtb \
> > > + aspeed-bmc-inspur-fp5280g2.dtb \
> > > aspeed-bmc-lenovo-hr630.dtb \
> > > aspeed-bmc-microsoft-olympus.dtb \
> > > aspeed-bmc-opp-lanyang.dtb \
> > > diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
> > > new file mode 100644
> > > index 0000000..771de77
> > > --- /dev/null
> > > +++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
> > > @@ -0,0 +1,843 @@
> > > +// SPDX-License-Identifier: GPL-2.0+
> > > +/dts-v1/;
> > > +#include "aspeed-g5.dtsi"
> > > +#include <dt-bindings/gpio/aspeed-gpio.h>
> > > +#include <dt-bindings/leds/leds-pca955x.h>
> > > +
> > > +/ {
> > > + model = "FP5280G2 BMC";
> > > + compatible = "inspur,fp5280g2-bmc", "aspeed,ast2500";
> > > +
> > > + chosen {
> > > + stdout-path = &uart5;
> > > + bootargs = "console=ttyS4,115200 earlyprintk";
> > > + };
> > > +
> > > + memory@80000000 {
> > > + reg = <0x80000000 0x20000000>;
> > > + };
> > > +
> > > + reserved-memory {
> > > + #address-cells = <1>;
> > > + #size-cells = <1>;
> > > + ranges;
> > > +
> > > + vga_memory: framebuffer@9f000000 {
> > > + no-map;
> > > + reg = <0x9f000000 0x01000000>; /* 16M */
> > > + };
> > > +
> > > + flash_memory: region@98000000 {
> > > + no-map;
> > > + reg = <0x98000000 0x04000000>; /* 64M */
> > > + };
> > > +
> > > + coldfire_memory: codefire_memory@9ef00000 {
> > > + reg = <0x9ef00000 0x00100000>;
> > > + no-map;
> > > + };
> > > +
> > > + gfx_memory: framebuffer {
> > > + size = <0x01000000>;
> > > + alignment = <0x01000000>;
> > > + compatible = "shared-dma-pool";
> > > + reusable;
> > > + };
> > > +
> > > + video_engine_memory: jpegbuffer {
> > > + size = <0x02000000>; /* 32M */
> > > + alignment = <0x01000000>;
> > > + compatible = "shared-dma-pool";
> > > + reusable;
> > > + };
> > > + };
> > > +
> > > + fsi: gpio-fsi {
> > > + compatible = "fsi-master-gpio", "fsi-master";
> > > + #address-cells = <2>;
> > > + #size-cells = <0>;
> > > + no-gpio-delays;
> > > +
> > > + memory-region = <&coldfire_memory>;
> > > + aspeed,sram = <&sram>;
> > > + aspeed,cvic = <&cvic>;
> > > +
> > > + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
> > > + data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
> > > + mux-gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_HIGH>;
> > > + enable-gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
> > > + trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
> > > + };
> > > +
> > > + gpio-keys {
> > > + compatible = "gpio-keys";
> > > +
> > > + checkstop {
> > > + label = "checkstop";
> > > + gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
> > > + linux,code = <ASPEED_GPIO(B, 3)>;
> > > + };
> > > +
> > > + ps0-presence {
> > > + label = "ps0-presence";
> > > + gpios = <&gpio ASPEED_GPIO(F, 0) GPIO_ACTIVE_LOW>;
> > > + linux,code = <ASPEED_GPIO(F, 0)>;
> > > + };
> > > +
> > > + ps1-presence {
> > > + label = "ps1-presence";
> > > + gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
> > > + linux,code = <ASPEED_GPIO(F, 1)>;
> > > + };
> > > +
> > > + };
> > > +
> > > + gpio-keys-polled {
> > > + compatible = "gpio-keys-polled";
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + poll-interval = <1000>;
> > > +
> > > + fan0-presence {
> > > + label = "fan0-presence";
> > > + gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
> > > + linux,code = <0>;
> > > + };
> > > +
> > > + fan1-presence {
> > > + label = "fan1-presence";
> > > + gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
> > > + linux,code = <1>;
> > > + };
> > > +
> > > + fan2-presence {
> > > + label = "fan2-presence";
> > > + gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
> > > + linux,code = <2>;
> > > + };
> > > +
> > > + fan3-presence {
> > > + label = "fan3-presence";
> > > + gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
> > > + linux,code = <3>;
> > > + };
> > > +
> > > + fan4-presence {
> > > + label = "fan4-presence";
> > > + gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
> > > + linux,code = <4>;
> > > + };
> > > +
> > > + fan5-presence {
> > > + label = "fan5-presence";
> > > + gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
> > > + linux,code = <5>;
> > > + };
> > > +
> > > + fan6-presence {
> > > + label = "fan6-presence";
> > > + gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
> > > + linux,code = <6>;
> > > + };
> > > +
> > > + fan7-presence {
> > > + label = "fan7-presence";
> > > + gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
> > > + linux,code = <7>;
> > > + };
> > > + };
> > > +
> > > + leds {
> > > + compatible = "gpio-leds";
> > > +
> > > + power {
> > > + label = "power";
> > > + /* TODO: dummy gpio */
> > > + gpios = <&gpio ASPEED_GPIO(R, 1) GPIO_ACTIVE_LOW>;
> > > + };
> > > +
> > > + };
> > > +
> > > + iio-hwmon-battery {
> > > + compatible = "iio-hwmon";
> > > + io-channels = <&adc 15>;
> > > + };
> > > +
> > > + iio-hwmon {
> > > + compatible = "iio-hwmon";
> > > + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
> > > + <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
> > > + <&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>;
> > > + };
> > > +
> > > +};
> > > +
> > > +&fmc {
> > > + status = "okay";
> > > +
> > > + flash@0 {
> > > + status = "okay";
> > > + label = "bmc";
> > > + m25p,fast-read;
> > > + spi-max-frequency = <50000000>;
> > > +#include "openbmc-flash-layout.dtsi"
> > > + };
> > > +};
> > > +
> > > +&spi1 {
> > > + status = "okay";
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_spi1_default>;
> > > +
> > > + flash@0 {
> > > + status = "okay";
> > > + label = "pnor";
> > > + m25p,fast-read;
> > > + spi-max-frequency = <100000000>;
> > > + };
> > > +};
> > > +
> > > +&uart1 {
> > > + /* Rear RS-232 connector */
> > > + status = "okay";
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_txd1_default
> > > + &pinctrl_rxd1_default
> > > + &pinctrl_nrts1_default
> > > + &pinctrl_ndtr1_default
> > > + &pinctrl_ndsr1_default
> > > + &pinctrl_ncts1_default
> > > + &pinctrl_ndcd1_default
> > > + &pinctrl_nri1_default>;
> > > +};
> > > +
> > > +&uart2 {
> > > + /* Test Point */
> > > + status = "okay";
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
> > > +};
> > > +
> > > +&uart3 {
> > > + /* APSS */
> > > + status = "okay";
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
> > > +};
> > > +
> > > +&uart5 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&lpc_ctrl {
> > > + status = "okay";
> > > + memory-region = <&flash_memory>;
> > > + flash = <&spi1>;
> > > +};
> > > +
> > > +&mbox {
> > > + status = "okay";
>
> Are you sure this is necessary? We're planning to drop mbox support in the near
> future, so just want to make sure you're aware of that.
I am not sure.
I just know that bmc can not host without
[mboxd](https://github.com/openbmc/hiomapd).
>
> > > +};
> > > +
> > > +&mac0 {
> > > + status = "okay";
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_rmii1_default>;
> > > + use-ncsi;
> > > +};
> > > +
> > > +&mac1 {
> > > + status = "okay";
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
> > > +};
> > > +
> > > +&i2c0 {
> > > + /* LCD */
> > > + status = "okay";
> > > +};
> > > +
> > > +&i2c1 {
> > > + status = "okay";
> > > +
> > > + eeprom@50 {
> > > + compatible = "atmel,24c256";
> > > + reg = <0x50>;
> > > + label = "fru";
> > > + };
> > > +
> > > +};
> > > +
> > > +&i2c2 {
> > > + status = "okay";
> > > +
> > > + tmp112@48 {
> > > + compatible = "ti,tmp112";
> > > + reg = <0x48>;
> > > + label = "inlet";
> > > + };
> > > +
> > > + tmp112@49 {
> > > + compatible = "ti,tmp112";
> > > + reg = <0x49>;
> > > + label = "outlet";
> > > + };
> > > +
> > > + i2c-switch@70 {
> > > + compatible = "nxp,pca9546";
> > > + reg = <0x70>;
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + i2c@0 {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + reg = <0>;
> > > +
> > > + tmp112@4a {
> > > + compatible = "ti,tmp112";
> > > + reg = <0x4a>;
> > > + label = "psu_inlet";
> > > + };
> > > +
> > > + };
> > > +
> > > + i2c@1 {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + reg = <1>;
> > > +
> > > + tmp112@4a {
> > > + compatible = "ti,tmp112";
> > > + reg = <0x4a>;
> > > + label = "ocp_zone";
> > > + };
> > > + };
> > > +
> > > + i2c@2 {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + reg = <2>;
> > > +
> > > + tmp112@4a {
> > > + compatible = "ti,tmp112";
> > > + reg = <0x4a>;
> > > + label = "bmc_zone";
> > > + };
> > > + };
> > > +
> > > + i2c@3 {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + reg = <3>;
> > > +
> > > + tmp112@7c {
> > > + compatible = "emc1413";
>
> Should have a "microchip," prefix?
Sure.
>
> > > + reg = <0x7c>;
> > > + };
> > > + };
> > > +
> > > + };
> > > +};
> > > +
> > > +&i2c3 {
> > > + /* Riser Card */
> > > + status = "okay";
> > > +};
> > > +
> > > +&i2c4 {
> > > + status = "okay";
> > > +
> > > + rtc@68 {
> > > + compatible = "dallas,ds3232";
> > > + reg = <0x68>;
> > > + };
> > > +};
> > > +
> > > +&i2c5 {
> > > + /* vr */
> > > + status = "okay";
> > > +};
> > > +
> > > +&i2c6 {
> > > + /* bp card */
> > > + status = "okay";
> > > +};
> > > +
> > > +&i2c7 {
> > > + status = "okay";
> > > +
> > > + i2c-switch@70 {
> > > + compatible = "nxp,pca9546";
> > > + reg = <0x70>;
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + i2c@0 {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + reg = <0>;
> > > +
> > > + adm1278@10 {
> > > + compatible = "adi,adm1278";
> > > + reg = <0x10>;
> > > + };
> > > +
> > > + adm1278@13 {
> > > + compatible = "adi,adm1278";
> > > + reg = <0x13>;
> > > + };
> > > +
> > > + adm1278@50 {
> > > + compatible = "adi,adm1278";
> > > + reg = <0x50>;
> > > + };
> > > +
> > > + adm1278@53 {
> > > + compatible = "adi,adm1278";
> > > + reg = <0x53>;
> > > + };
> > > +
> > > + };
> > > +
> > > + /*pcie riser*/
> > > +
> > > + };
> > > +};
> > > +
> > > +&i2c8 {
> > > + status = "okay";
> > > +
> > > + pca0: pca9555@20 {
> > > + compatible = "nxp,pca9555";
> > > + reg = <0x20>;
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + gpio-controller;
> > > + #gpio-cells = <2>;
> > > +
> > > + gpio@0 {
> > > + reg = <0>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@1 {
> > > + reg = <1>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@2 {
> > > + reg = <2>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@3 {
> > > + reg = <3>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@4 {
> > > + reg = <4>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@5 {
> > > + reg = <5>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@6 {
> > > + reg = <6>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@7 {
> > > + reg = <7>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + };
> > > +
> > > + pca1: pca9555@21 {
> > > + compatible = "nxp,pca9555";
> > > + reg = <0x21>;
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + gpio-controller;
> > > + #gpio-cells = <2>;
> > > +
> > > + gpio@0 {
> > > + reg = <0>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@1 {
> > > + reg = <1>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@2 {
> > > + reg = <2>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@3 {
> > > + reg = <3>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@4 {
> > > + reg = <4>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@5 {
> > > + reg = <5>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@6 {
> > > + reg = <6>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@7 {
> > > + reg = <7>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > + };
> > > +
> > > + pca2: pca9555@22 {
> > > + compatible = "nxp,pca9555";
> > > + reg = <0x22>;
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + gpio-controller;
> > > + #gpio-cells = <2>;
> > > +
> > > + gpio@0 {
> > > + reg = <0>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@1 {
> > > + reg = <1>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@2 {
> > > + reg = <2>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@3 {
> > > + reg = <3>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@4 {
> > > + reg = <4>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@5 {
> > > + reg = <5>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@6 {
> > > + reg = <6>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@7 {
> > > + reg = <7>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > + };
> > > +
> > > + pca3: pca9555@23 {
> > > + compatible = "nxp,pca9555";
> > > + reg = <0x23>;
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + gpio-controller;
> > > + #gpio-cells = <2>;
> > > +
> > > + gpio@0 {
> > > + reg = <0>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@1 {
> > > + reg = <1>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@2 {
> > > + reg = <2>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@3 {
> > > + reg = <3>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@4 {
> > > + reg = <4>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@5 {
> > > + reg = <5>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@6 {
> > > + reg = <6>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@7 {
> > > + reg = <7>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > + };
> > > +
> > > + pca4: pca9555@24 {
> > > + compatible = "nxp,pca9555";
> > > + reg = <0x24>;
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + gpio-controller;
> > > + #gpio-cells = <2>;
> > > +
> > > + gpio@0 {
> > > + reg = <0>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@1 {
> > > + reg = <1>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@2 {
> > > + reg = <2>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@3 {
> > > + reg = <3>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@4 {
> > > + reg = <4>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@5 {
> > > + reg = <5>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@6 {
> > > + reg = <6>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@7 {
> > > + reg = <7>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > + };
> > > +
> > > + pca5: pca9555@25 {
> > > + compatible = "nxp,pca9555";
> > > + reg = <0x25>;
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + gpio-controller;
> > > + #gpio-cells = <2>;
> > > +
> > > + gpio@0 {
> > > + reg = <0>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@1 {
> > > + reg = <1>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@2 {
> > > + reg = <2>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@3 {
> > > + reg = <3>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@4 {
> > > + reg = <4>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@5 {
> > > + reg = <5>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@6 {
> > > + reg = <6>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > +
> > > + gpio@7 {
> > > + reg = <7>;
> > > + type = <PCA955X_TYPE_GPIO>;
> > > + };
> > > + };
> > > +
> > > +};
> > > +
> > > +&i2c9 {
> > > + /* cpld */
> > > + status = "okay";
> > > +};
> > > +
> > > +&i2c10 {
> > > + /* hdd bp */
> > > + status = "okay";
> > > +};
> > > +
> > > +&i2c11 {
> > > + status = "okay";
> > > +
> > > + power-supply@58 {
> > > + compatible = "pmbus";
> > > + reg = <0x58>;
> > > + };
> > > +
> > > + power-supply@5a {
> > > + compatible = "pmbus";
> > > + reg = <0x5a>;
> > > + };
> > > +};
> > > +
> > > +&i2c12 {
> > > + /* odcc */
> > > + status = "okay";
> > > +};
> > > +
> > > +&vuart {
> > > + status = "okay";
> > > +};
> > > +
> > > +&gfx {
> > > + status = "okay";
> > > + memory-region = <&gfx_memory>;
> > > +};
> > > +
> > > +&pinctrl {
> > > + aspeed,external-nodes = <&gfx &lhc>;
> > > +};
> > > +
> > > +&gpio {
> > > + pin_gpio_b7 {
> > > + gpio-hog;
> > > + gpios = <ASPEED_GPIO(B,7) GPIO_ACTIVE_LOW>;
> > > + output-high;
> > > + line-name = "BMC_INIT_OK";
> > > + };
> > > +};
> > > +
> > > +&wdt1 {
> > > + aspeed,reset-type = "none";
> > > + aspeed,external-signal;
> > > + aspeed,ext-push-pull;
> > > + aspeed,ext-active-high;
> > > +
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_wdtrst1_default>;
> > > +};
> > > +
> > > +&ibt {
> > > + status = "okay";
> > > +
> > > +};
> > > +
> > > +&adc {
> > > + status = "okay";
>
> Please add the pinctrl properties to mux the necessary ADC lines which you have
> associated with the iio-hwmon bridge (you've used lines 0-14).
ack
>
> Cheers,
>
> Andrew
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-06-12 8:50 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-06 2:17 [PATCH dev-5.1] ARM: dts: aspeed: Add Inspur fp5280g2 BMC machine John Wang
2019-06-06 7:51 ` Lei YU
2019-06-12 2:19 ` Andrew Jeffery
2019-06-12 8:49 ` John Wang
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.