All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kai-Heng Feng <kai.heng.feng@canonical.com>
To: Lu Baolu <baolu.lu@linux.intel.com>
Cc: bhelgaas@google.com, mika.westerberg@linux.intel.com,
	koba.ko@canonical.com, Russell Currey <ruscur@russell.cc>,
	"Oliver O'Halloran" <oohall@gmail.com>,
	Lalithambika Krishnakumar <lalithambika.krishnakumar@intel.com>,
	Joerg Roedel <jroedel@suse.de>,
	linuxppc-dev@lists.ozlabs.org, linux-pci@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/2] PCI/AER: Disable AER service when link is in L2/L3 ready, L2 and L3 state
Date: Thu, 27 Jan 2022 19:14:25 +0800	[thread overview]
Message-ID: <CAAd53p6+KPAJchh9Jx59Fkkj5FidSxsW0yHjLqooFjvu-Y9u7w@mail.gmail.com> (raw)
In-Reply-To: <0259955f-8bbb-1778-f234-398f1356db8b@linux.intel.com>

On Thu, Jan 27, 2022 at 3:01 PM Lu Baolu <baolu.lu@linux.intel.com> wrote:
>
> On 2022/1/27 10:54, Kai-Heng Feng wrote:
> > Commit 50310600ebda ("iommu/vt-d: Enable PCI ACS for platform opt in
> > hint") enables ACS, and some platforms lose its NVMe after resume from
> > S3:
> > [   50.947816] pcieport 0000:00:1b.0: DPC: containment event, status:0x1f01 source:0x0000
> > [   50.947817] pcieport 0000:00:1b.0: DPC: unmasked uncorrectable error detected
> > [   50.947829] pcieport 0000:00:1b.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Receiver ID)
> > [   50.947830] pcieport 0000:00:1b.0:   device [8086:06ac] error status/mask=00200000/00010000
> > [   50.947831] pcieport 0000:00:1b.0:    [21] ACSViol                (First)
> > [   50.947841] pcieport 0000:00:1b.0: AER: broadcast error_detected message
> > [   50.947843] nvme nvme0: frozen state error detected, reset controller
> >
> > It happens right after ACS gets enabled during resume.
> >
> > There's another case, when Thunderbolt reaches D3cold:
> > [   30.100211] pcieport 0000:00:1d.0: AER: Uncorrected (Non-Fatal) error received: 0000:00:1d.0
> > [   30.100251] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID)
> > [   30.100256] pcieport 0000:00:1d.0:   device [8086:7ab0] error status/mask=00100000/00004000
> > [   30.100262] pcieport 0000:00:1d.0:    [20] UnsupReq               (First)
> > [   30.100267] pcieport 0000:00:1d.0: AER:   TLP Header: 34000000 08000052 00000000 00000000
> > [   30.100372] thunderbolt 0000:0a:00.0: AER: can't recover (no error_detected callback)
> > [   30.100401] xhci_hcd 0000:3e:00.0: AER: can't recover (no error_detected callback)
> > [   30.100427] pcieport 0000:00:1d.0: AER: device recovery failed
> >
> > So disable AER service to avoid the noises from turning power rails
> > on/off when the device is in low power states (D3hot and D3cold), as
> > PCIe spec "5.2 Link State Power Management" states that TLP and DLLP
> > transmission is disabled for a Link in L2/L3 Ready (D3hot), L2 (D3cold
> > with aux power) and L3 (D3cold).
> >
> > Bugzilla:https://bugzilla.kernel.org/show_bug.cgi?id=209149
> > Bugzilla:https://bugzilla.kernel.org/show_bug.cgi?id=215453
> > Fixes: 50310600ebda ("iommu/vt-d: Enable PCI ACS for platform opt in hint")
>
> I don't know what this fix has to do with the commit 50310600ebda.

Commit 50310600ebda only exposed the underlying issue. Do you think
"Fixes:" tag should change to other commits?

> Commit 50310600ebda only makes sure that PCI ACS is enabled whenever
> Intel IOMMU is on. Before this commit, PCI ACS could also be enabled
> and result in the same problem. Or anything I missed?

The system in question didn't enable ACS before commit 50310600ebda.

Kai-Heng

>
> Best regards,
> baolu

WARNING: multiple messages have this Message-ID (diff)
From: Kai-Heng Feng <kai.heng.feng@canonical.com>
To: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Joerg Roedel <jroedel@suse.de>,
	Lalithambika Krishnakumar <lalithambika.krishnakumar@intel.com>,
	linuxppc-dev@lists.ozlabs.org, linux-pci@vger.kernel.org,
	linux-kernel@vger.kernel.org, koba.ko@canonical.com,
	Oliver O'Halloran <oohall@gmail.com>,
	bhelgaas@google.com, mika.westerberg@linux.intel.com
Subject: Re: [PATCH v2 1/2] PCI/AER: Disable AER service when link is in L2/L3 ready, L2 and L3 state
Date: Thu, 27 Jan 2022 19:14:25 +0800	[thread overview]
Message-ID: <CAAd53p6+KPAJchh9Jx59Fkkj5FidSxsW0yHjLqooFjvu-Y9u7w@mail.gmail.com> (raw)
In-Reply-To: <0259955f-8bbb-1778-f234-398f1356db8b@linux.intel.com>

On Thu, Jan 27, 2022 at 3:01 PM Lu Baolu <baolu.lu@linux.intel.com> wrote:
>
> On 2022/1/27 10:54, Kai-Heng Feng wrote:
> > Commit 50310600ebda ("iommu/vt-d: Enable PCI ACS for platform opt in
> > hint") enables ACS, and some platforms lose its NVMe after resume from
> > S3:
> > [   50.947816] pcieport 0000:00:1b.0: DPC: containment event, status:0x1f01 source:0x0000
> > [   50.947817] pcieport 0000:00:1b.0: DPC: unmasked uncorrectable error detected
> > [   50.947829] pcieport 0000:00:1b.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Receiver ID)
> > [   50.947830] pcieport 0000:00:1b.0:   device [8086:06ac] error status/mask=00200000/00010000
> > [   50.947831] pcieport 0000:00:1b.0:    [21] ACSViol                (First)
> > [   50.947841] pcieport 0000:00:1b.0: AER: broadcast error_detected message
> > [   50.947843] nvme nvme0: frozen state error detected, reset controller
> >
> > It happens right after ACS gets enabled during resume.
> >
> > There's another case, when Thunderbolt reaches D3cold:
> > [   30.100211] pcieport 0000:00:1d.0: AER: Uncorrected (Non-Fatal) error received: 0000:00:1d.0
> > [   30.100251] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID)
> > [   30.100256] pcieport 0000:00:1d.0:   device [8086:7ab0] error status/mask=00100000/00004000
> > [   30.100262] pcieport 0000:00:1d.0:    [20] UnsupReq               (First)
> > [   30.100267] pcieport 0000:00:1d.0: AER:   TLP Header: 34000000 08000052 00000000 00000000
> > [   30.100372] thunderbolt 0000:0a:00.0: AER: can't recover (no error_detected callback)
> > [   30.100401] xhci_hcd 0000:3e:00.0: AER: can't recover (no error_detected callback)
> > [   30.100427] pcieport 0000:00:1d.0: AER: device recovery failed
> >
> > So disable AER service to avoid the noises from turning power rails
> > on/off when the device is in low power states (D3hot and D3cold), as
> > PCIe spec "5.2 Link State Power Management" states that TLP and DLLP
> > transmission is disabled for a Link in L2/L3 Ready (D3hot), L2 (D3cold
> > with aux power) and L3 (D3cold).
> >
> > Bugzilla:https://bugzilla.kernel.org/show_bug.cgi?id=209149
> > Bugzilla:https://bugzilla.kernel.org/show_bug.cgi?id=215453
> > Fixes: 50310600ebda ("iommu/vt-d: Enable PCI ACS for platform opt in hint")
>
> I don't know what this fix has to do with the commit 50310600ebda.

Commit 50310600ebda only exposed the underlying issue. Do you think
"Fixes:" tag should change to other commits?

> Commit 50310600ebda only makes sure that PCI ACS is enabled whenever
> Intel IOMMU is on. Before this commit, PCI ACS could also be enabled
> and result in the same problem. Or anything I missed?

The system in question didn't enable ACS before commit 50310600ebda.

Kai-Heng

>
> Best regards,
> baolu

  reply	other threads:[~2022-01-27 11:14 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-27  2:54 [PATCH v2 1/2] PCI/AER: Disable AER service when link is in L2/L3 ready, L2 and L3 state Kai-Heng Feng
2022-01-27  2:54 ` Kai-Heng Feng
2022-01-27  2:54 ` [PATCH v2 2/2] PCI/DPC: Disable DPC " Kai-Heng Feng
2022-01-27  2:54   ` Kai-Heng Feng
2022-01-27  6:31   ` Mika Westerberg
2022-01-27  6:31     ` Mika Westerberg
2022-03-19 20:40   ` Sathyanarayanan Kuppuswamy
2022-03-19 20:40     ` Sathyanarayanan Kuppuswamy
2022-01-27  6:30 ` [PATCH v2 1/2] PCI/AER: Disable AER " Mika Westerberg
2022-01-27  6:30   ` Mika Westerberg
2022-01-27  7:01 ` Lu Baolu
2022-01-27  7:01   ` Lu Baolu
2022-01-27 11:14   ` Kai-Heng Feng [this message]
2022-01-27 11:14     ` Kai-Heng Feng
2022-01-28  2:53     ` Lu Baolu
2022-01-28  2:53       ` Lu Baolu
2022-01-28  3:29       ` Kai-Heng Feng
2022-01-28  3:29         ` Kai-Heng Feng
2022-03-19 20:38 ` Sathyanarayanan Kuppuswamy
2022-03-19 20:38   ` Sathyanarayanan Kuppuswamy
2022-03-21  2:38   ` Kai-Heng Feng
2022-03-21  2:38     ` Kai-Heng Feng
2022-03-21  3:52     ` Sathyanarayanan Kuppuswamy
2022-03-21  3:52       ` Sathyanarayanan Kuppuswamy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAAd53p6+KPAJchh9Jx59Fkkj5FidSxsW0yHjLqooFjvu-Y9u7w@mail.gmail.com \
    --to=kai.heng.feng@canonical.com \
    --cc=baolu.lu@linux.intel.com \
    --cc=bhelgaas@google.com \
    --cc=jroedel@suse.de \
    --cc=koba.ko@canonical.com \
    --cc=lalithambika.krishnakumar@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mika.westerberg@linux.intel.com \
    --cc=oohall@gmail.com \
    --cc=ruscur@russell.cc \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.