* [meta-raspberrypi] Rainbow screen with Raspberry Pi 3 A+ but not on B+
@ 2019-02-01 12:10 Markus W
2019-02-01 12:17 ` Belisko Marek
0 siblings, 1 reply; 4+ messages in thread
From: Markus W @ 2019-02-01 12:10 UTC (permalink / raw)
To: yocto
[-- Attachment #1: Type: text/plain, Size: 569 bytes --]
Hi!
I have been running a yocto image (sumo) on a raspberry 3 B+ without any
problems, but wanted to test the new raspberry Pi 3 A+ board with it but I
just get the Rainbow screen on boot. I have updated meta-openembedded to
the latest sumo and meta-raspberry was still up to date with the latest
(sumo) and still the same result.
My question: Has anybody been running sumo on a raspberrypi 3 a+
successfully? I have been googling around for issues but can't find
anything on the new board and yocto. Seems that I am missing something.
Regards,
Markus
[-- Attachment #2: Type: text/html, Size: 674 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [meta-raspberrypi] Rainbow screen with Raspberry Pi 3 A+ but not on B+
2019-02-01 12:10 [meta-raspberrypi] Rainbow screen with Raspberry Pi 3 A+ but not on B+ Markus W
@ 2019-02-01 12:17 ` Belisko Marek
2019-02-01 13:54 ` Markus W
0 siblings, 1 reply; 4+ messages in thread
From: Belisko Marek @ 2019-02-01 12:17 UTC (permalink / raw)
To: Markus W; +Cc: yocto
[-- Attachment #1: Type: text/plain, Size: 1348 bytes --]
On Fri, Feb 1, 2019 at 1:11 PM Markus W <markus4dev@gmail.com> wrote:
> Hi!
>
> I have been running a yocto image (sumo) on a raspberry 3 B+ without any
> problems, but wanted to test the new raspberry Pi 3 A+ board with it but I
> just get the Rainbow screen on boot. I have updated meta-openembedded to
> the latest sumo and meta-raspberry was still up to date with the latest
> (sumo) and still the same result.
>
> My question: Has anybody been running sumo on a raspberrypi 3 a+
> successfully? I have been googling around for issues but can't find
> anything on the new board and yocto. Seems that I am missing something.
>
Can you connect serial console and add enable_uart=1 to config.txt and
verify? This looks like it doesn't boot. You can also ask on [1]
>
> Regards,
> Markus
>
--
>
[1] - https://github.com/agherzan/meta-raspberrypi/issues
BR,
marek
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
>
--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer
Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com
[-- Attachment #2: Type: text/html, Size: 2720 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [meta-raspberrypi] Rainbow screen with Raspberry Pi 3 A+ but not on B+
2019-02-01 12:17 ` Belisko Marek
@ 2019-02-01 13:54 ` Markus W
2019-02-01 16:23 ` Belisko Marek
0 siblings, 1 reply; 4+ messages in thread
From: Markus W @ 2019-02-01 13:54 UTC (permalink / raw)
To: Belisko Marek; +Cc: yocto
[-- Attachment #1: Type: text/plain, Size: 1966 bytes --]
Thanks Marek!
I pretty sure it doesn't boot, but I haven't confirmed it as you suggested
it.
I have never connected to the uart interface directly on the GPIO or via
bluetooth. It probably takes me more time to figure it out and to do this
than trying the thud branch as @agherzan has mentioned here:
https://github.com/agherzan/meta-raspberrypi/issues/373
I am also using meta-mender, do I need to upgrade all layers to thud than?
Regards,
Markus
On Fri, 1 Feb 2019 at 13:17, Belisko Marek <marek.belisko@gmail.com> wrote:
> On Fri, Feb 1, 2019 at 1:11 PM Markus W <markus4dev@gmail.com> wrote:
>
>> Hi!
>>
>> I have been running a yocto image (sumo) on a raspberry 3 B+ without any
>> problems, but wanted to test the new raspberry Pi 3 A+ board with it but I
>> just get the Rainbow screen on boot. I have updated meta-openembedded to
>> the latest sumo and meta-raspberry was still up to date with the latest
>> (sumo) and still the same result.
>>
>
>> My question: Has anybody been running sumo on a raspberrypi 3 a+
>> successfully? I have been googling around for issues but can't find
>> anything on the new board and yocto. Seems that I am missing something.
>>
> Can you connect serial console and add enable_uart=1 to config.txt and
> verify? This looks like it doesn't boot. You can also ask on [1]
>
>>
>> Regards,
>> Markus
>>
> --
>>
>
> [1] - https://github.com/agherzan/meta-raspberrypi/issues
>
> BR,
>
> marek
>
>> _______________________________________________
>> yocto mailing list
>> yocto@yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto
>>
>
>
> --
> as simple and primitive as possible
> -------------------------------------------------
> Marek Belisko - OPEN-NANDRA
> Freelance Developer
>
> Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
> Tel: +421 915 052 184
> skype: marekwhite
> twitter: #opennandra
> web: http://open-nandra.com
>
[-- Attachment #2: Type: text/html, Size: 3894 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [meta-raspberrypi] Rainbow screen with Raspberry Pi 3 A+ but not on B+
2019-02-01 13:54 ` Markus W
@ 2019-02-01 16:23 ` Belisko Marek
0 siblings, 0 replies; 4+ messages in thread
From: Belisko Marek @ 2019-02-01 16:23 UTC (permalink / raw)
To: Markus W; +Cc: yocto
[-- Attachment #1: Type: text/plain, Size: 2702 bytes --]
Hi Markus,
On Fri, Feb 1, 2019 at 2:54 PM Markus W <markus4dev@gmail.com> wrote:
> Thanks Marek!
>
> I pretty sure it doesn't boot, but I haven't confirmed it as you suggested
> it.
>
> I have never connected to the uart interface directly on the GPIO or via
> bluetooth. It probably takes me more time to figure it out and to do this
> than trying the thud branch as @agherzan has mentioned here:
> https://github.com/agherzan/meta-raspberrypi/issues/373
>
OK attaching serial port isn't that hard but as you stated, please try thud
branch. You can try https://hub.mender.io/t/raspberry-pi-3-model-b-b/57 to
follow this procedure as this is verified for B/B+ works fine with thud.
>
> I am also using meta-mender, do I need to upgrade all layers to thud than?
>
> Regards,
> Markus
>
> P.S.: pls don't top post ;)
marek
>
> On Fri, 1 Feb 2019 at 13:17, Belisko Marek <marek.belisko@gmail.com>
> wrote:
>
>> On Fri, Feb 1, 2019 at 1:11 PM Markus W <markus4dev@gmail.com> wrote:
>>
>>> Hi!
>>>
>>> I have been running a yocto image (sumo) on a raspberry 3 B+ without any
>>> problems, but wanted to test the new raspberry Pi 3 A+ board with it but I
>>> just get the Rainbow screen on boot. I have updated meta-openembedded to
>>> the latest sumo and meta-raspberry was still up to date with the latest
>>> (sumo) and still the same result.
>>>
>>
>>> My question: Has anybody been running sumo on a raspberrypi 3 a+
>>> successfully? I have been googling around for issues but can't find
>>> anything on the new board and yocto. Seems that I am missing something.
>>>
>> Can you connect serial console and add enable_uart=1 to config.txt and
>> verify? This looks like it doesn't boot. You can also ask on [1]
>>
>>>
>>> Regards,
>>> Markus
>>>
>> --
>>>
>>
>> [1] - https://github.com/agherzan/meta-raspberrypi/issues
>>
>> BR,
>>
>> marek
>>
>>> _______________________________________________
>>> yocto mailing list
>>> yocto@yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/yocto
>>>
>>
>>
>> --
>> as simple and primitive as possible
>> -------------------------------------------------
>> Marek Belisko - OPEN-NANDRA
>> Freelance Developer
>>
>> Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
>> Tel: +421 915 052 184
>> skype: marekwhite
>> twitter: #opennandra
>> web: http://open-nandra.com
>>
>
--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer
Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com
[-- Attachment #2: Type: text/html, Size: 5482 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-02-01 16:23 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-01 12:10 [meta-raspberrypi] Rainbow screen with Raspberry Pi 3 A+ but not on B+ Markus W
2019-02-01 12:17 ` Belisko Marek
2019-02-01 13:54 ` Markus W
2019-02-01 16:23 ` Belisko Marek
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.