All of lore.kernel.org
 help / color / mirror / Atom feed
From: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RESEND PATCH v3 2/2] ARM: socfpga: stratix10: Remove CONFIG_OF_EMBED
Date: Wed, 9 Oct 2019 15:32:16 +0200	[thread overview]
Message-ID: <CAAh8qsyN6QcGq2LM7K7DwVQ_Ncvu0U6D_F47_DnU47Oat2DVgQ@mail.gmail.com> (raw)
In-Reply-To: <9ae7203d0b21e72eb6f05599c8d1ac3e9f971238.camel@linux.intel.com>

On Wed, Oct 9, 2019 at 2:56 PM Dalon L Westergreen
<dalon.westergreen@linux.intel.com> wrote:
>
> On Sat, 2019-10-05 at 21:41 +0200, Simon Goldschmidt wrote:
>
> Am 27.09.2019 um 20:27 schrieb Dalon Westergreen:
>
> From: Dalon Westergreen <
>
> dalon.westergreen at intel.com
>
> >
>
>
> CONFIG_OF_EMBED was primarily enabled to support the stratix10
>
> spl hex file requirements.  Since this option now produces a
>
> warning during build, and the spl hex can be created using
>
> alternate methods, CONFIG_OF_EMBED is no longer needed.
>
>
> Signed-off-by: Dalon Westergreen <
>
> dalon.westergreen at intel.com
>
> >
>
> ---
>
>   configs/socfpga_stratix10_defconfig       | 1 -
>
>   include/configs/socfpga_stratix10_socdk.h | 2 +-
>
>   2 files changed, 1 insertion(+), 2 deletions(-)
>
>
> diff --git a/configs/socfpga_stratix10_defconfig b/configs/socfpga_stratix10_defconfig
>
> index 5ae53a4db9..ae1b9bead1 100644
>
> --- a/configs/socfpga_stratix10_defconfig
>
> +++ b/configs/socfpga_stratix10_defconfig
>
> @@ -27,7 +27,6 @@ CONFIG_CMD_CACHE=y
>
>   CONFIG_CMD_EXT4=y
>
>   CONFIG_CMD_FAT=y
>
>   CONFIG_CMD_FS_GENERIC=y
>
> -CONFIG_OF_EMBED=y
>
>   CONFIG_DEFAULT_DEVICE_TREE="socfpga_stratix10_socdk"
>
>   CONFIG_ENV_IS_IN_MMC=y
>
>   CONFIG_NET_RANDOM_ETHADDR=y
>
> diff --git a/include/configs/socfpga_stratix10_socdk.h b/include/configs/socfpga_stratix10_socdk.h
>
> index 7b55dd14da..f9ecf9d2df 100644
>
> --- a/include/configs/socfpga_stratix10_socdk.h
>
> +++ b/include/configs/socfpga_stratix10_socdk.h
>
> @@ -204,6 +204,6 @@ unsigned int cm_get_l4_sys_free_clk_hz(void);
>
>
>
>   /* SPL SDMMC boot support */
>
>   #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
>
> -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
>
> +#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img"
>
>
> Didn't we have this before? The payload name "u-boot.img" is correct for
>
> all configurations. Without CONFIG_OF_EMBED the two above are the same,
>
> but changing the name should not be necessary.
>
>
> Regards,
>
> Simon
>
>
> Correct, but it seems convention is to just use u-boot.img and i would like all the socfpga devices
> to do the same thing.

Right. 'u-boot.img' is the one to use. Why do you change it to 'u-boot-dtb.img'
then in this patch?

Regards,
Simon

>
> --dalon
>
>
>
>
>   #endif /* __CONFIG_H */
>
>
>

  reply	other threads:[~2019-10-09 13:32 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-27 18:27 [U-Boot] [RESEND PATCH v3 1/2] Makefile: Add target to generate hex output for combined spl and dtb Dalon Westergreen
2019-09-27 18:27 ` [U-Boot] [RESEND PATCH v3 2/2] ARM: socfpga: stratix10: Remove CONFIG_OF_EMBED Dalon Westergreen
2019-10-05 19:41   ` Simon Goldschmidt
2019-10-09 12:56     ` Dalon L Westergreen
2019-10-09 13:32       ` Simon Goldschmidt [this message]
2019-10-04 13:54 ` [U-Boot] [RESEND PATCH v3 1/2] Makefile: Add target to generate hex output for combined spl and dtb Tom Rini
2019-10-05 19:40 ` Simon Goldschmidt
2019-10-09 12:57   ` Dalon L Westergreen
2019-10-09 13:34     ` Simon Goldschmidt
  -- strict thread matches above, loose matches on Subject: below --
2019-08-07 14:44 Dalon Westergreen
2019-08-07 14:44 ` [U-Boot] [RESEND PATCH v3 2/2] ARM: socfpga: stratix10: Remove CONFIG_OF_EMBED Dalon Westergreen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAAh8qsyN6QcGq2LM7K7DwVQ_Ncvu0U6D_F47_DnU47Oat2DVgQ@mail.gmail.com \
    --to=simon.k.r.goldschmidt@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.