Re: [RFC PATCH 2/2] RISC-V: Add basic support for SBI v0.2

[Anup Patel <anup@brainfault.org>]

On Tue, Aug 27, 2019 at 5:03 AM Atish Patra <atish.patra@wdc.com> wrote:
>
> The SBI v0.2 introduces a base extension which is backward compatible
> with v0.1. Implement all helper functions and minimum required SBI
> calls from v0.2 for now. All other base extension function will be
> added later as per need.
>
> Signed-off-by: Atish Patra <atish.patra@wdc.com>
> ---
>  arch/riscv/include/asm/sbi.h | 68 +++++++++++++++++++++++++++++-------
>  arch/riscv/kernel/Makefile   |  1 +
>  arch/riscv/kernel/sbi.c      | 50 ++++++++++++++++++++++++++
>  arch/riscv/kernel/setup.c    |  2 ++
>  4 files changed, 108 insertions(+), 13 deletions(-)
>  create mode 100644 arch/riscv/kernel/sbi.c
>
> diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h
> index 7f5ecaaaa0d7..4a4476956693 100644
> --- a/arch/riscv/include/asm/sbi.h
> +++ b/arch/riscv/include/asm/sbi.h
> @@ -8,7 +8,6 @@
>
>  #include <linux/types.h>
>
> -
>  #define SBI_EXT_LEGACY_SET_TIMER 0x0
>  #define SBI_EXT_LEGACY_CONSOLE_PUTCHAR 0x1
>  #define SBI_EXT_LEGACY_CONSOLE_GETCHAR 0x2
> @@ -19,28 +18,61 @@
>  #define SBI_EXT_LEGACY_REMOTE_SFENCE_VMA_ASID 0x7
>  #define SBI_EXT_LEGACY_SHUTDOWN 0x8
>
> -#define SBI_CALL_LEGACY(which, arg0, arg1, arg2, arg3) ({             \
> +#define SBI_EXT_BASE 0x10
> +
> +enum sbi_ext_base_fid {
> +       SBI_EXT_BASE_GET_SPEC_VERSION = 0,
> +       SBI_EXT_BASE_GET_IMP_ID,
> +       SBI_EXT_BASE_GET_IMP_VERSION,
> +       SBI_EXT_BASE_PROBE_EXT,
> +       SBI_EXT_BASE_GET_MVENDORID,
> +       SBI_EXT_BASE_GET_MARCHID,
> +       SBI_EXT_BASE_GET_MIMPID,
> +};
> +
> +#define SBI_CALL_LEGACY(ext, fid, arg0, arg1, arg2, arg3) ({   \
>         register uintptr_t a0 asm ("a0") = (uintptr_t)(arg0);   \
>         register uintptr_t a1 asm ("a1") = (uintptr_t)(arg1);   \
>         register uintptr_t a2 asm ("a2") = (uintptr_t)(arg2);   \
>         register uintptr_t a3 asm ("a3") = (uintptr_t)(arg3);   \
> -       register uintptr_t a7 asm ("a7") = (uintptr_t)(which);  \
> +       register uintptr_t a6 asm ("a6") = (uintptr_t)(fid);    \
> +       register uintptr_t a7 asm ("a7") = (uintptr_t)(ext);    \
>         asm volatile ("ecall"                                   \
> -                     : "+r" (a0)                               \
> -                     : "r" (a1), "r" (a2), "r" (a3), "r" (a7)  \
> +                     : "+r" (a0), "+r" (a1)                    \
> +                     : "r" (a2), "r" (a3), "r" (a6), "r" (a7) \
>                       : "memory");                              \
>         a0;                                                     \
>  })

I think instead of removing old convention we should use
calling convention based on sbi_version detected at boot-time.

>
>  /* Lazy implementations until SBI is finalized */
> -#define SBI_CALL_LEGACY_0(which) SBI_CALL_LEGACY(which, 0, 0, 0, 0)
> -#define SBI_CALL_LEGACY_1(which, arg0) SBI_CALL_LEGACY(which, arg0, 0, 0, 0)
> -#define SBI_CALL_LEGACY_2(which, arg0, arg1) \
> -               SBI_CALL_LEGACY(which, arg0, arg1, 0, 0)
> -#define SBI_CALL_LEGACY_3(which, arg0, arg1, arg2) \
> -               SBI_CALL_LEGACY(which, arg0, arg1, arg2, 0)
> -#define SBI_CALL_LEGACY_4(which, arg0, arg1, arg2, arg3) \
> -               SBI_CALL_LEGACY(which, arg0, arg1, arg2, arg3)
> +#define SBI_CALL_LEGACY_0(ext) SBI_CALL_LEGACY(ext, 0, 0, 0, 0, 0)
> +#define SBI_CALL_LEGACY_1(ext, arg0) SBI_CALL_LEGACY(ext, 0, arg0, 0, 0, 0)
> +#define SBI_CALL_LEGACY_2(ext, arg0, arg1) \
> +               SBI_CALL_LEGACY(ext, 0, arg0, arg1, 0, 0)
> +#define SBI_CALL_LEGACY_3(ext, arg0, arg1, arg2) \
> +               SBI_CALL_LEGACY(ext, 0, arg0, arg1, arg2, 0)
> +#define SBI_CALL_LEGACY_4(ext, arg0, arg1, arg2, arg3) \
> +               SBI_CALL_LEGACY(ext, 0, arg0, arg1, arg2, arg3)
> +
> +extern unsigned long sbi_firmware_version;
> +struct sbiret {
> +       long error;
> +       long value;
> +};
> +
> +void riscv_sbi_init(void);
> +struct sbiret riscv_sbi_ecall(int ext, int fid, int arg0, int arg1,
> +                              int arg2, int arg3);
> +
> +#define SBI_CALL_0(ext, fid) riscv_sbi_ecall(ext, fid, 0, 0, 0, 0)
> +#define SBI_CALL_1(ext, fid, arg0) riscv_sbi_ecall(ext, fid, arg0, 0, 0, 0)
> +#define SBI_CALL_2(ext, fid, arg0, arg1) \
> +               riscv_sbi_ecall(ext, fid, arg0, arg1, 0, 0)
> +#define SBI_CALL_3(ext, fid, arg0, arg1, arg2) \
> +               riscv_sbi_ecall(ext, fid, arg0, arg1, arg2, 0)
> +#define SBI_CALL_4(ext, fid, arg0, arg1, arg2, arg3) \
> +               riscv_sbi_ecall(ext, fid, arg0, arg1, arg2, arg3)
> +
>
>  static inline void sbi_console_putchar(int ch)
>  {
> @@ -99,4 +131,14 @@ static inline void sbi_remote_sfence_vma_asid(const unsigned long *hart_mask,
>                           start, size, asid);
>  }

To be sure that new kernels work fine on older kernel, we
can be conservative and move all legacy SBI calls to kernel/sbi.c.
All legacy SBI calls can check sbi_version and use appropriate
SBI calling convention.

This might be redundant if we can ensure that newer kernels
work fine with older SBI v0.1 firmwares.

>
> +static inline unsigned long riscv_sbi_major_version(void)
> +{
> +       return (sbi_firmware_version >> 24) & 0x7f;
> +}
> +
> +static inline unsigned long riscv_sbi_minor_version(void)
> +{
> +       return sbi_firmware_version & 0xffffff;
> +}
> +
>  #endif
> diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
> index 2420d37d96de..faf862d26924 100644
> --- a/arch/riscv/kernel/Makefile
> +++ b/arch/riscv/kernel/Makefile
> @@ -17,6 +17,7 @@ obj-y += irq.o
>  obj-y  += process.o
>  obj-y  += ptrace.o
>  obj-y  += reset.o
> +obj-y  += sbi.o
>  obj-y  += setup.o
>  obj-y  += signal.o
>  obj-y  += syscall_table.o
> diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
> new file mode 100644
> index 000000000000..457b8cc0e9d9
> --- /dev/null
> +++ b/arch/riscv/kernel/sbi.c
> @@ -0,0 +1,50 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * SBI initialilization and base extension implementation.
> + *
> + * Copyright (c) 2019 Western Digital Corporation or its affiliates.
> + */
> +
> +#include <asm/sbi.h>
> +#include <linux/sched.h>
> +
> +unsigned long sbi_firmware_version;

Rename this too sbi_version or sbi_spec_version.
The firmware version is different thing.

> +
> +struct sbiret riscv_sbi_ecall(int ext, int fid, int arg0, int arg1,
> +                            int arg2, int arg3)
> +{
> +       struct sbiret ret;
> +
> +       register uintptr_t a0 asm ("a0") = (uintptr_t)(arg0);
> +       register uintptr_t a1 asm ("a1") = (uintptr_t)(arg1);
> +       register uintptr_t a2 asm ("a2") = (uintptr_t)(arg2);
> +       register uintptr_t a3 asm ("a3") = (uintptr_t)(arg3);
> +       register uintptr_t a6 asm ("a6") = (uintptr_t)(fid);
> +       register uintptr_t a7 asm ("a7") = (uintptr_t)(ext);
> +       asm volatile ("ecall"
> +                     : "+r" (a0), "+r" (a1)
> +                     : "r" (a2), "r" (a3), "r" (a6), "r" (a7)
> +                     : "memory");
> +       ret.error = a0;
> +       ret.value = a1;
> +
> +       return ret;
> +}
> +
> +static struct sbiret sbi_get_spec_version(void)
> +{
> +       return SBI_CALL_0(SBI_EXT_BASE, SBI_EXT_BASE_GET_SPEC_VERSION);
> +}
> +
> +void riscv_sbi_init(void)
> +{
> +       struct sbiret ret;
> +
> +       /* legacy SBI version*/
> +       sbi_firmware_version = 0x1;
> +       ret = sbi_get_spec_version();
> +       if (!ret.error)
> +               sbi_firmware_version = ret.value;
> +       pr_info("SBI version implemented in firmware [%lu:%lu]\n",
> +               riscv_sbi_major_version(), riscv_sbi_minor_version());

Should we not print SBI implementation ID and SBI firmware version.

Regards,
Anup

> +}
> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
> index a990a6cb184f..4c324fd398c8 100644
> --- a/arch/riscv/kernel/setup.c
> +++ b/arch/riscv/kernel/setup.c
> @@ -21,6 +21,7 @@
>  #include <asm/sections.h>
>  #include <asm/pgtable.h>
>  #include <asm/smp.h>
> +#include <asm/sbi.h>
>  #include <asm/tlbflush.h>
>  #include <asm/thread_info.h>
>
> @@ -70,6 +71,7 @@ void __init setup_arch(char **cmdline_p)
>         swiotlb_init(1);
>  #endif
>
> +       riscv_sbi_init();
>  #ifdef CONFIG_SMP
>         setup_smp();
>  #endif
> --
> 2.21.0
>