From: Javier Martinez Canillas <martinez.javier@gmail.com>
To: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Russell King <linux@arm.linux.org.uk>,
Tony Lindgren <tony@atomide.com>,
"Govindraj.R" <govindraj.raja@ti.com>,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 1/1] ARM: OMAP: omap2plus_defconfig: Enable EXT4 support
Date: Thu, 28 Jun 2012 00:28:03 +0200 [thread overview]
Message-ID: <CAAwP0s2eTWk2Uf0HZ13Lq5gA0HNp8V87znjd6rX6Uh0ZPy03PA@mail.gmail.com> (raw)
In-Reply-To: <1340489939-5390-1-git-send-email-javier@dowhile0.org>
On Sun, Jun 24, 2012 at 12:18 AM, Javier Martinez Canillas
<javier@dowhile0.org> wrote:
> On OMAP boards that includes an SD card slot, an EXT4 partition could
> be used to store the root file system. So, the kernel should have
> built-in support for EXT4 to be able to mount the VFS root on boot.
>
> Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
> ---
> arch/arm/configs/omap2plus_defconfig | 1 +
> 1 files changed, 1 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
> index 9854ff4..f3087cb 100644
> --- a/arch/arm/configs/omap2plus_defconfig
> +++ b/arch/arm/configs/omap2plus_defconfig
> @@ -197,6 +197,7 @@ CONFIG_RTC_DRV_TWL4030=y
> CONFIG_EXT2_FS=y
> CONFIG_EXT3_FS=y
> # CONFIG_EXT3_FS_XATTR is not set
> +CONFIG_EXT4_FS=y
> CONFIG_QUOTA=y
> CONFIG_QFMT_V2=y
> CONFIG_MSDOS_FS=y
> --
> 1.7.7.6
>
Hi,
any news about this patch?
Is quite annoying to have to enable EXT4 support each time I want to
try a new kernel on my board.
Best regards,
Javier
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: martinez.javier@gmail.com (Javier Martinez Canillas)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/1] ARM: OMAP: omap2plus_defconfig: Enable EXT4 support
Date: Thu, 28 Jun 2012 00:28:03 +0200 [thread overview]
Message-ID: <CAAwP0s2eTWk2Uf0HZ13Lq5gA0HNp8V87znjd6rX6Uh0ZPy03PA@mail.gmail.com> (raw)
In-Reply-To: <1340489939-5390-1-git-send-email-javier@dowhile0.org>
On Sun, Jun 24, 2012 at 12:18 AM, Javier Martinez Canillas
<javier@dowhile0.org> wrote:
> On OMAP boards that includes an SD card slot, an EXT4 partition could
> be used to store the root file system. So, the kernel should have
> built-in support for EXT4 to be able to mount the VFS root on boot.
>
> Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
> ---
> ?arch/arm/configs/omap2plus_defconfig | ? ?1 +
> ?1 files changed, 1 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
> index 9854ff4..f3087cb 100644
> --- a/arch/arm/configs/omap2plus_defconfig
> +++ b/arch/arm/configs/omap2plus_defconfig
> @@ -197,6 +197,7 @@ CONFIG_RTC_DRV_TWL4030=y
> ?CONFIG_EXT2_FS=y
> ?CONFIG_EXT3_FS=y
> ?# CONFIG_EXT3_FS_XATTR is not set
> +CONFIG_EXT4_FS=y
> ?CONFIG_QUOTA=y
> ?CONFIG_QFMT_V2=y
> ?CONFIG_MSDOS_FS=y
> --
> 1.7.7.6
>
Hi,
any news about this patch?
Is quite annoying to have to enable EXT4 support each time I want to
try a new kernel on my board.
Best regards,
Javier
next prev parent reply other threads:[~2012-06-27 22:28 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-23 22:18 [PATCH 1/1] ARM: OMAP: omap2plus_defconfig: Enable EXT4 support Javier Martinez Canillas
2012-06-23 22:18 ` Javier Martinez Canillas
2012-06-27 22:28 ` Javier Martinez Canillas [this message]
2012-06-27 22:28 ` Javier Martinez Canillas
2012-06-28 6:37 ` Tony Lindgren
2012-06-28 6:37 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAAwP0s2eTWk2Uf0HZ13Lq5gA0HNp8V87znjd6rX6Uh0ZPy03PA@mail.gmail.com \
--to=martinez.javier@gmail.com \
--cc=govindraj.raja@ti.com \
--cc=javier@dowhile0.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.