* [ath9k-devel] My wireless card keeps de / re authenticating
@ 2014-01-31 0:52 Colin Kincaid Williams
2014-02-04 19:38 ` Colin Kincaid Williams
0 siblings, 1 reply; 2+ messages in thread
From: Colin Kincaid Williams @ 2014-01-31 0:52 UTC (permalink / raw)
To: ath9k-devel
Not really sure what the issue is. I saw this '[ 133.419432] cfg80211:
Calling CRDA for country: KR' and thought maybe the domain is not right. I
tried iw reg set US, but I am still having the issue. Strange thing is this
used to not be a problem, and now it's happening all the time and I can't
use the net.
[ 8.319630] ath: phy0: ASPM enabled: 0x43
[ 8.319633] ath: EEPROM regdomain: 0x65
[ 8.319634] ath: EEPROM indicates we should expect a direct regpair map
[ 8.319636] ath: Country alpha2 being used: 00
[ 8.319636] ath: Regpair used: 0x65
[ 8.378928] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 8.379194] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90005ba0000,
irq=18
[ 70.808185] wlan0: authenticate with 00:1e:31:c3:19:e5
[ 70.836295] wlan0: direct probe to 00:1e:31:c3:19:e5 (try 1/3)
[ 71.037709] wlan0: send auth to 00:1e:31:c3:19:e5 (try 2/3)
[ 71.046739] wlan0: authenticated
[ 71.046883] ath9k 0000:04:00.0 wlan0: disabling HT as WMM/QoS is not
supported by the AP
[ 71.046888] ath9k 0000:04:00.0 wlan0: disabling VHT as WMM/QoS is not
supported by the AP
[ 71.047698] wlan0: associate with 00:1e:31:c3:19:e5 (try 1/3)
[ 71.052519] wlan0: RX AssocResp from 00:1e:31:c3:19:e5 (capab=0x431
status=0 aid=1)
[ 71.052755] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 71.052801] wlan0: associated
[ 133.419432] cfg80211: Calling CRDA for country: KR
[ 146.216115] wlan0: authenticate with 00:1e:31:c3:19:e5
[ 146.235874] wlan0: send auth to 00:1e:31:c3:19:e5 (try 1/3)
[ 146.244024] wlan0: authenticated
[ 146.244101] ath9k 0000:04:00.0 wlan0: disabling HT as WMM/QoS is not
supported by the AP
[ 146.244104] ath9k 0000:04:00.0 wlan0: disabling VHT as WMM/QoS is not
supported by the AP
[ 146.245802] wlan0: associate with 00:1e:31:c3:19:e5 (try 1/3)
[ 146.249356] wlan0: RX AssocResp from 00:1e:31:c3:19:e5 (capab=0x431
status=0 aid=1)
[ 146.249646] wlan0: associated
[ 235.409884] cfg80211: Calling CRDA to update world regulatory domain
[ 248.206802] wlan0: authenticate with 00:1e:31:c3:19:e5
[ 248.226562] wlan0: direct probe to 00:1e:31:c3:19:e5 (try 1/3)
[ 248.429836] wlan0: send auth to 00:1e:31:c3:19:e5 (try 2/3)
[ 248.533150] wlan0: send auth to 00:1e:31:c3:19:e5 (try 3/3)
[ 248.539111] wlan0: authenticated
[ 248.539192] ath9k 0000:04:00.0 wlan0: disabling HT as WMM/QoS is not
supported by the AP
[ 248.539195] ath9k 0000:04:00.0 wlan0: disabling VHT as WMM/QoS is not
supported by the AP
[ 248.539821] wlan0: associate with 00:1e:31:c3:19:e5 (try 1/3)
[ 248.542396] wlan0: RX AssocResp from 00:1e:31:c3:19:e5 (capab=0x431
status=0 aid=1)
[ 248.542617] wlan0: associated
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20140130/d0a0a7c6/attachment-0001.htm
^ permalink raw reply [flat|nested] 2+ messages in thread
* [ath9k-devel] My wireless card keeps de / re authenticating
2014-01-31 0:52 [ath9k-devel] My wireless card keeps de / re authenticating Colin Kincaid Williams
@ 2014-02-04 19:38 ` Colin Kincaid Williams
0 siblings, 0 replies; 2+ messages in thread
From: Colin Kincaid Williams @ 2014-02-04 19:38 UTC (permalink / raw)
To: ath9k-devel
Can anybody comment on this? I'm not sure, can it be that my card EEPROM is
programmed for south korea?
[ 8.319633] ath: EEPROM regdomain: 0x65
[ 8.319634] ath: EEPROM indicates we should expect a direct regpair map
[ 8.319636] ath: Country alpha2 being used: 00
[ 8.319636] ath: Regpair used: 0x65
[ 133.419432] cfg80211: Calling CRDA for country: KR
On Thu, Jan 30, 2014 at 4:52 PM, Colin Kincaid Williams <discord@uw.edu>wrote:
> Not really sure what the issue is. I saw this '[ 133.419432] cfg80211:
> Calling CRDA for country: KR' and thought maybe the domain is not right. I
> tried iw reg set US, but I am still having the issue. Strange thing is this
> used to not be a problem, and now it's happening all the time and I can't
> use the net.
>
> [ 8.319630] ath: phy0: ASPM enabled: 0x43
> [ 8.319633] ath: EEPROM regdomain: 0x65
> [ 8.319634] ath: EEPROM indicates we should expect a direct regpair map
> [ 8.319636] ath: Country alpha2 being used: 00
> [ 8.319636] ath: Regpair used: 0x65
> [ 8.378928] ieee80211 phy0: Selected rate control algorithm
> 'minstrel_ht'
> [ 8.379194] ieee80211 phy0: Atheros AR9287 Rev:2
> mem=0xffffc90005ba0000, irq=18
>
> [ 70.808185] wlan0: authenticate with 00:1e:31:c3:19:e5
> [ 70.836295] wlan0: direct probe to 00:1e:31:c3:19:e5 (try 1/3)
> [ 71.037709] wlan0: send auth to 00:1e:31:c3:19:e5 (try 2/3)
> [ 71.046739] wlan0: authenticated
> [ 71.046883] ath9k 0000:04:00.0 wlan0: disabling HT as WMM/QoS is not
> supported by the AP
> [ 71.046888] ath9k 0000:04:00.0 wlan0: disabling VHT as WMM/QoS is not
> supported by the AP
> [ 71.047698] wlan0: associate with 00:1e:31:c3:19:e5 (try 1/3)
> [ 71.052519] wlan0: RX AssocResp from 00:1e:31:c3:19:e5 (capab=0x431
> status=0 aid=1)
> [ 71.052755] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
> [ 71.052801] wlan0: associated
> [ 133.419432] cfg80211: Calling CRDA for country: KR
> [ 146.216115] wlan0: authenticate with 00:1e:31:c3:19:e5
> [ 146.235874] wlan0: send auth to 00:1e:31:c3:19:e5 (try 1/3)
> [ 146.244024] wlan0: authenticated
> [ 146.244101] ath9k 0000:04:00.0 wlan0: disabling HT as WMM/QoS is not
> supported by the AP
> [ 146.244104] ath9k 0000:04:00.0 wlan0: disabling VHT as WMM/QoS is not
> supported by the AP
> [ 146.245802] wlan0: associate with 00:1e:31:c3:19:e5 (try 1/3)
> [ 146.249356] wlan0: RX AssocResp from 00:1e:31:c3:19:e5 (capab=0x431
> status=0 aid=1)
> [ 146.249646] wlan0: associated
> [ 235.409884] cfg80211: Calling CRDA to update world regulatory domain
> [ 248.206802] wlan0: authenticate with 00:1e:31:c3:19:e5
> [ 248.226562] wlan0: direct probe to 00:1e:31:c3:19:e5 (try 1/3)
> [ 248.429836] wlan0: send auth to 00:1e:31:c3:19:e5 (try 2/3)
> [ 248.533150] wlan0: send auth to 00:1e:31:c3:19:e5 (try 3/3)
> [ 248.539111] wlan0: authenticated
> [ 248.539192] ath9k 0000:04:00.0 wlan0: disabling HT as WMM/QoS is not
> supported by the AP
> [ 248.539195] ath9k 0000:04:00.0 wlan0: disabling VHT as WMM/QoS is not
> supported by the AP
> [ 248.539821] wlan0: associate with 00:1e:31:c3:19:e5 (try 1/3)
> [ 248.542396] wlan0: RX AssocResp from 00:1e:31:c3:19:e5 (capab=0x431
> status=0 aid=1)
> [ 248.542617] wlan0: associated
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20140204/5597f4e0/attachment.htm
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-02-04 19:38 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-01-31 0:52 [ath9k-devel] My wireless card keeps de / re authenticating Colin Kincaid Williams
2014-02-04 19:38 ` Colin Kincaid Williams
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.