Astrometa swap frontend0 and frontend1

Astrometa swap frontend0 and frontend1

[CIJOML CIJOMLovic]

Hello,

I have an Astrometa DVB-T2 dual USB card:

[41802.362830] usb 3-3: new high-speed USB device number 4 using xhci_hcd
[41802.520747] usb 3-3: New USB device found, idVendor=15f4,
idProduct=0131, bcdDevice= 1.00
[41802.520751] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[41802.520753] usb 3-3: Product: dvbt2
[41802.520755] usb 3-3: Manufacturer: astrometadvbt2
[41802.527992] usb 3-3: dvb_usb_v2: found a 'Astrometa DVB-T2' in warm state
[41802.597901] usb 3-3: dvb_usb_v2: will pass the complete MPEG2
transport stream to the software demuxer
[41802.597907] dvbdev: DVB: registering new adapter (Astrometa DVB-T2)
[41802.625041] i2c i2c-10: Added multiplexed i2c bus 11
[41802.625045] rtl2832 10-0010: Realtek RTL2832 successfully attached
[41802.631564] mn88473 10-0018: Panasonic MN88473 successfully identified
[41802.631612] usb 3-3: DVB: registering adapter 0 frontend 0 (Realtek
RTL2832 (DVB-T))...
[41802.631755] usb 3-3: DVB: registering adapter 0 frontend 1
(Panasonic MN88473)...
[41802.631947] r820t 11-003a: creating new instance
[41802.638797] r820t 11-003a: Rafael Micro r820t successfully identified
[41802.638863] r820t 11-003a: attaching existing instance
[41802.643622] r820t 11-003a: Rafael Micro r820t successfully identified
[41802.646497] rtl2832_sdr rtl2832_sdr.1.auto: Registered as swradio0
[41802.646499] rtl2832_sdr rtl2832_sdr.1.auto: Realtek RTL2832 SDR attached
[41802.646501] rtl2832_sdr rtl2832_sdr.1.auto: SDR API is still
slightly experimental and functionality changes may follow
[41802.653040] Registered IR keymap rc-empty
[41802.653107] rc rc0: Astrometa DVB-T2 as
/devices/pci0000:00/0000:00:14.0/usb3/3-3/rc/rc0
[41802.653250] input: Astrometa DVB-T2 as
/devices/pci0000:00/0000:00:14.0/usb3/3-3/rc/rc0/input29
[41802.653762] rc rc0: lirc_dev: driver dvb_usb_rtl28xxu registered at
minor = 0, raw IR receiver, no transmitter
[41802.653858] usb 3-3: dvb_usb_v2: schedule remote query interval to 200 msecs
[41802.665572] usb 3-3: dvb_usb_v2: 'Astrometa DVB-T2' successfully
initialized and connected

I would like swap frontend0 and frontend1 with UDEV. Would anybody
help me? The frontend0 is DVB-T tuner, but this terrestrial norm is to
be switch off. So I would like use DVB-T2 tuner which is currently
frontend1. I have to use manual intervention since I was not able to
teach udev to do it for me (kaffeine works only with frontend0)

Any clue please?

Thank you

Michal