* [PATCH v3 1/3] Bluetooth: L2CAP: Add get_peer_pid callback
2020-03-18 21:50 [PATCH v3 0/3] Enable use of L2CAP_MODE_EXT_FLOWCTL Luiz Augusto von Dentz
@ 2020-03-18 21:50 ` Luiz Augusto von Dentz
2020-03-18 21:50 ` [PATCH v3 2/3] Bluetooth: L2CAP: Use DEFER_SETUP to group ECRED connections Luiz Augusto von Dentz
2020-03-18 21:50 ` [PATCH v3 3/3] Bluetooth: Add BT_MODE socket option Luiz Augusto von Dentz
2 siblings, 0 replies; 8+ messages in thread
From: Luiz Augusto von Dentz @ 2020-03-18 21:50 UTC (permalink / raw)
To: linux-bluetooth
From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a callback to read the socket pid.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
include/net/bluetooth/l2cap.h | 1 +
net/bluetooth/l2cap_sock.c | 8 ++++++++
2 files changed, 9 insertions(+)
diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index 537aaead259f..2d7d28474d34 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -660,6 +660,7 @@ struct l2cap_ops {
void (*suspend) (struct l2cap_chan *chan);
void (*set_shutdown) (struct l2cap_chan *chan);
long (*get_sndtimeo) (struct l2cap_chan *chan);
+ struct pid *(*get_peer_pid) (struct l2cap_chan *chan);
struct sk_buff *(*alloc_skb) (struct l2cap_chan *chan,
unsigned long hdr_len,
unsigned long len, int nb);
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index 40fb10b591bd..117ba20ea194 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -1504,6 +1504,13 @@ static long l2cap_sock_get_sndtimeo_cb(struct l2cap_chan *chan)
return sk->sk_sndtimeo;
}
+static struct pid *l2cap_sock_get_peer_pid_cb(struct l2cap_chan *chan)
+{
+ struct sock *sk = chan->data;
+
+ return sk->sk_peer_pid;
+}
+
static void l2cap_sock_suspend_cb(struct l2cap_chan *chan)
{
struct sock *sk = chan->data;
@@ -1525,6 +1532,7 @@ static const struct l2cap_ops l2cap_chan_ops = {
.suspend = l2cap_sock_suspend_cb,
.set_shutdown = l2cap_sock_set_shutdown_cb,
.get_sndtimeo = l2cap_sock_get_sndtimeo_cb,
+ .get_peer_pid = l2cap_sock_get_peer_pid_cb,
.alloc_skb = l2cap_sock_alloc_skb_cb,
};
--
2.21.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v3 2/3] Bluetooth: L2CAP: Use DEFER_SETUP to group ECRED connections
2020-03-18 21:50 [PATCH v3 0/3] Enable use of L2CAP_MODE_EXT_FLOWCTL Luiz Augusto von Dentz
2020-03-18 21:50 ` [PATCH v3 1/3] Bluetooth: L2CAP: Add get_peer_pid callback Luiz Augusto von Dentz
@ 2020-03-18 21:50 ` Luiz Augusto von Dentz
2020-03-18 21:50 ` [PATCH v3 3/3] Bluetooth: Add BT_MODE socket option Luiz Augusto von Dentz
2 siblings, 0 replies; 8+ messages in thread
From: Luiz Augusto von Dentz @ 2020-03-18 21:50 UTC (permalink / raw)
To: linux-bluetooth
From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This uses the DEFER_SETUP flag to group channels with
L2CAP_CREDIT_BASED_CONNECTION_REQ.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
include/net/bluetooth/l2cap.h | 4 +
net/bluetooth/l2cap_core.c | 136 +++++++++++++++++++++++++++++++---
2 files changed, 130 insertions(+), 10 deletions(-)
diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index 2d7d28474d34..dada14d0622c 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -47,6 +47,7 @@
#define L2CAP_DEFAULT_ACC_LAT 0xFFFFFFFF
#define L2CAP_BREDR_MAX_PAYLOAD 1019 /* 3-DH5 packet */
#define L2CAP_LE_MIN_MTU 23
+#define L2CAP_ECRED_CONN_SCID_MAX 5
#define L2CAP_DISC_TIMEOUT msecs_to_jiffies(100)
#define L2CAP_DISC_REJ_TIMEOUT msecs_to_jiffies(5000)
@@ -984,6 +985,9 @@ void l2cap_chan_set_defaults(struct l2cap_chan *chan);
int l2cap_ertm_init(struct l2cap_chan *chan);
void l2cap_chan_add(struct l2cap_conn *conn, struct l2cap_chan *chan);
void __l2cap_chan_add(struct l2cap_conn *conn, struct l2cap_chan *chan);
+typedef void (*l2cap_chan_func_t)(struct l2cap_chan *chan, void *data);
+void l2cap_chan_list(struct l2cap_conn *conn, l2cap_chan_func_t func,
+ void *data);
void l2cap_chan_del(struct l2cap_chan *chan, int err);
void l2cap_send_conn_req(struct l2cap_chan *chan);
void l2cap_move_start(struct l2cap_chan *chan);
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 5e6e35ab44dd..9f699d09d973 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -678,6 +678,29 @@ void l2cap_chan_del(struct l2cap_chan *chan, int err)
}
EXPORT_SYMBOL_GPL(l2cap_chan_del);
+static void __l2cap_chan_list(struct l2cap_conn *conn, l2cap_chan_func_t func,
+ void *data)
+{
+ struct l2cap_chan *chan;
+
+ list_for_each_entry(chan, &conn->chan_l, list) {
+ func(chan, data);
+ }
+}
+
+void l2cap_chan_list(struct l2cap_conn *conn, l2cap_chan_func_t func,
+ void *data)
+{
+ if (!conn)
+ return;
+
+ mutex_lock(&conn->chan_lock);
+ __l2cap_chan_list(conn, func, data);
+ mutex_unlock(&conn->chan_lock);
+}
+
+EXPORT_SYMBOL_GPL(l2cap_chan_list);
+
static void l2cap_conn_update_id_addr(struct work_struct *work)
{
struct l2cap_conn *conn = container_of(work, struct l2cap_conn,
@@ -1356,29 +1379,79 @@ static void l2cap_le_connect(struct l2cap_chan *chan)
sizeof(req), &req);
}
-static void l2cap_ecred_connect(struct l2cap_chan *chan)
-{
- struct l2cap_conn *conn = chan->conn;
+struct l2cap_ecred_conn_data {
struct {
struct l2cap_ecred_conn_req req;
- __le16 scid;
+ __le16 scid[5];
} __packed pdu;
+ struct l2cap_chan *chan;
+ struct pid *pid;
+ int count;
+};
+
+static void l2cap_ecred_defer_connect(struct l2cap_chan *chan, void *data)
+{
+ struct l2cap_ecred_conn_data *conn = data;
+ struct pid *pid;
+
+ if (chan == conn->chan)
+ return;
+
+ if (!test_and_clear_bit(FLAG_DEFER_SETUP, &chan->flags))
+ return;
+
+ pid = chan->ops->get_peer_pid(chan);
+
+ /* Only add deferred channels with the same PID/PSM */
+ if (conn->pid != pid || chan->psm != conn->chan->psm || chan->ident ||
+ chan->mode != L2CAP_MODE_EXT_FLOWCTL || chan->state != BT_CONNECT)
+ return;
+
+ if (test_and_set_bit(FLAG_ECRED_CONN_REQ_SENT, &chan->flags))
+ return;
+
+ l2cap_ecred_init(chan, 0);
+
+ /* Set the same ident so we can match on the rsp */
+ chan->ident = conn->chan->ident;
+
+ /* Include all channels deferred */
+ conn->pdu.scid[conn->count] = cpu_to_le16(chan->scid);
+
+ conn->count++;
+}
+
+static void l2cap_ecred_connect(struct l2cap_chan *chan)
+{
+ struct l2cap_conn *conn = chan->conn;
+ struct l2cap_ecred_conn_data data;
+
+ if (test_bit(FLAG_DEFER_SETUP, &chan->flags))
+ return;
if (test_and_set_bit(FLAG_ECRED_CONN_REQ_SENT, &chan->flags))
return;
l2cap_ecred_init(chan, 0);
- pdu.req.psm = chan->psm;
- pdu.req.mtu = cpu_to_le16(chan->imtu);
- pdu.req.mps = cpu_to_le16(chan->mps);
- pdu.req.credits = cpu_to_le16(chan->rx_credits);
- pdu.scid = cpu_to_le16(chan->scid);
+ data.pdu.req.psm = chan->psm;
+ data.pdu.req.mtu = cpu_to_le16(chan->imtu);
+ data.pdu.req.mps = cpu_to_le16(chan->mps);
+ data.pdu.req.credits = cpu_to_le16(chan->rx_credits);
+ data.pdu.scid[0] = cpu_to_le16(chan->scid);
chan->ident = l2cap_get_ident(conn);
+ data.pid = chan->ops->get_peer_pid(chan);
+
+ data.count = 1;
+ data.chan = chan;
+ data.pid = chan->ops->get_peer_pid(chan);
+
+ __l2cap_chan_list(conn, l2cap_ecred_defer_connect, &data);
l2cap_send_cmd(conn, chan->ident, L2CAP_ECRED_CONN_REQ,
- sizeof(pdu), &pdu);
+ sizeof(data.pdu.req) + data.count * sizeof(__le16),
+ &data.pdu);
}
static void l2cap_le_start(struct l2cap_chan *chan)
@@ -7694,6 +7767,33 @@ static bool is_valid_psm(u16 psm, u8 dst_type) {
return ((psm & 0x0101) == 0x0001);
}
+struct l2cap_chan_data {
+ struct l2cap_chan *chan;
+ struct pid *pid;
+ int count;
+};
+
+static void l2cap_chan_by_pid(struct l2cap_chan *chan, void *data)
+{
+ struct l2cap_chan_data *d = data;
+ struct pid *pid;
+
+ if (chan == d->chan)
+ return;
+
+ if (!test_bit(FLAG_DEFER_SETUP, &chan->flags))
+ return;
+
+ pid = chan->ops->get_peer_pid(chan);
+
+ /* Only count deferred channels with the same PID/PSM */
+ if (d->pid != pid || chan->psm != d->chan->psm || chan->ident ||
+ chan->mode != L2CAP_MODE_EXT_FLOWCTL || chan->state != BT_CONNECT)
+ return;
+
+ d->count++;
+}
+
int l2cap_chan_connect(struct l2cap_chan *chan, __le16 psm, u16 cid,
bdaddr_t *dst, u8 dst_type)
{
@@ -7813,6 +7913,22 @@ int l2cap_chan_connect(struct l2cap_chan *chan, __le16 psm, u16 cid,
goto done;
}
+ if (chan->mode == L2CAP_MODE_EXT_FLOWCTL) {
+ struct l2cap_chan_data data;
+
+ data.chan = chan;
+ data.pid = chan->ops->get_peer_pid(chan);
+ data.count = 0;
+
+ l2cap_chan_list(conn, l2cap_chan_by_pid, &data);
+ /* Check if there isn't too many channels being connected */
+ if (!(data.count < L2CAP_ECRED_CONN_SCID_MAX - 1)) {
+ hci_conn_drop(hcon);
+ err = -EPROTO;
+ goto done;
+ }
+ }
+
mutex_lock(&conn->chan_lock);
l2cap_chan_lock(chan);
--
2.21.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v3 3/3] Bluetooth: Add BT_MODE socket option
2020-03-18 21:50 [PATCH v3 0/3] Enable use of L2CAP_MODE_EXT_FLOWCTL Luiz Augusto von Dentz
2020-03-18 21:50 ` [PATCH v3 1/3] Bluetooth: L2CAP: Add get_peer_pid callback Luiz Augusto von Dentz
2020-03-18 21:50 ` [PATCH v3 2/3] Bluetooth: L2CAP: Use DEFER_SETUP to group ECRED connections Luiz Augusto von Dentz
@ 2020-03-18 21:50 ` Luiz Augusto von Dentz
2020-03-20 0:58 ` Marcel Holtmann
2 siblings, 1 reply; 8+ messages in thread
From: Luiz Augusto von Dentz @ 2020-03-18 21:50 UTC (permalink / raw)
To: linux-bluetooth
From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds BT_MODE socket option which can be used to set L2CAP modes,
including modes only supported over LE which were not supported using
the L2CAP_OPTIONS.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
include/net/bluetooth/bluetooth.h | 11 ++++
net/bluetooth/l2cap_sock.c | 96 +++++++++++++++++++++++++++++++
2 files changed, 107 insertions(+)
diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index 1576353a2773..34191e34bfdc 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -139,6 +139,17 @@ struct bt_voice {
#define BT_PHY_LE_CODED_TX 0x00002000
#define BT_PHY_LE_CODED_RX 0x00004000
+#define BT_MODE 15
+
+#define BT_MODE_BASIC 0x00
+#define BT_MODE_RETRANS 0x01
+#define BT_MODE_FLOWCTL 0x02
+#define BT_MODE_ERTM 0x03
+#define BT_MODE_STREAMING 0x04
+#define BT_MODE_EXT_FLOWCTL 0x05
+
+#define BT_MODE_LE_FLOWCTL 0x80
+
__printf(1, 2)
void bt_info(const char *fmt, ...);
__printf(1, 2)
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index 117ba20ea194..f2bb376c699f 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -500,6 +500,25 @@ static int l2cap_sock_getsockopt_old(struct socket *sock, int optname,
return err;
}
+static u8 l2cap_get_mode(struct l2cap_chan *chan)
+{
+ switch (chan->mode) {
+ case L2CAP_MODE_BASIC:
+ case L2CAP_MODE_RETRANS:
+ case L2CAP_MODE_FLOWCTL:
+ case L2CAP_MODE_ERTM:
+ case L2CAP_MODE_STREAMING:
+ /* Mode above are the same on both old and new sockopt */
+ return chan->mode;
+ case L2CAP_MODE_LE_FLOWCTL:
+ return BT_MODE_FLOWCTL;
+ case L2CAP_MODE_EXT_FLOWCTL:
+ return BT_MODE_EXT_FLOWCTL;
+ }
+
+ return chan->mode;
+}
+
static int l2cap_sock_getsockopt(struct socket *sock, int level, int optname,
char __user *optval, int __user *optlen)
{
@@ -508,6 +527,7 @@ static int l2cap_sock_getsockopt(struct socket *sock, int level, int optname,
struct bt_security sec;
struct bt_power pwr;
u32 phys;
+ u8 mode;
int len, err = 0;
BT_DBG("sk %p", sk);
@@ -624,6 +644,23 @@ static int l2cap_sock_getsockopt(struct socket *sock, int level, int optname,
err = -EFAULT;
break;
+ case BT_MODE:
+ if (!enable_ecred) {
+ err = -ENOPROTOOPT;
+ break;
+ }
+
+ if (chan->chan_type != L2CAP_CHAN_CONN_ORIENTED) {
+ err = -EINVAL;
+ break;
+ }
+
+ mode = l2cap_get_mode(chan);
+
+ if (put_user(mode, (u8 __user *) optval))
+ err = -EFAULT;
+ break;
+
default:
err = -ENOPROTOOPT;
break;
@@ -763,6 +800,36 @@ static int l2cap_sock_setsockopt_old(struct socket *sock, int optname,
return err;
}
+static int l2cap_set_mode(struct l2cap_chan *chan, u8 mode)
+{
+ switch (mode) {
+ case BT_MODE_BASIC:
+ clear_bit(CONF_STATE2_DEVICE, &chan->conf_state);
+ break;
+ case BT_MODE_FLOWCTL:
+ if (bdaddr_type_is_le(chan->src_type))
+ mode = L2CAP_MODE_LE_FLOWCTL;
+ break;
+ case BT_MODE_EXT_FLOWCTL:
+ /* TODO: Add support for ECRED PDUs to BR/EDR */
+ if (!bdaddr_type_is_le(chan->src_type))
+ return -EINVAL;
+ mode = L2CAP_MODE_EXT_FLOWCTL;
+ break;
+ case BT_MODE_ERTM:
+ case BT_MODE_STREAMING:
+ if (!disable_ertm || bdaddr_type_is_le(chan->src_type))
+ break;
+ /* fall through */
+ default:
+ return -EINVAL;
+ }
+
+ chan->mode = mode;
+
+ return 0;
+}
+
static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
char __user *optval, unsigned int optlen)
{
@@ -968,6 +1035,35 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
break;
+ case BT_MODE:
+ if (!enable_ecred) {
+ err = -ENOPROTOOPT;
+ break;
+ }
+
+ if (sk->sk_state != BT_BOUND) {
+ err = -EINVAL;
+ break;
+ }
+
+ if (chan->chan_type != L2CAP_CHAN_CONN_ORIENTED) {
+ err = -EINVAL;
+ break;
+ }
+
+ if (get_user(opt, (u8 __user *) optval)) {
+ err = -EFAULT;
+ break;
+ }
+
+ err = l2cap_set_mode(chan, opt);
+ if (err)
+ break;
+
+ BT_DBG("mode 0x%2.2x", chan->mode);
+
+ break;
+
default:
err = -ENOPROTOOPT;
break;
--
2.21.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v3 3/3] Bluetooth: Add BT_MODE socket option
2020-03-18 21:50 ` [PATCH v3 3/3] Bluetooth: Add BT_MODE socket option Luiz Augusto von Dentz
@ 2020-03-20 0:58 ` Marcel Holtmann
2020-03-20 17:44 ` Luiz Augusto von Dentz
0 siblings, 1 reply; 8+ messages in thread
From: Marcel Holtmann @ 2020-03-20 0:58 UTC (permalink / raw)
To: Luiz Augusto von Dentz; +Cc: linux-bluetooth
Hi Luiz,
> This adds BT_MODE socket option which can be used to set L2CAP modes,
> including modes only supported over LE which were not supported using
> the L2CAP_OPTIONS.
>
> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
> ---
> include/net/bluetooth/bluetooth.h | 11 ++++
> net/bluetooth/l2cap_sock.c | 96 +++++++++++++++++++++++++++++++
> 2 files changed, 107 insertions(+)
>
> diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
> index 1576353a2773..34191e34bfdc 100644
> --- a/include/net/bluetooth/bluetooth.h
> +++ b/include/net/bluetooth/bluetooth.h
> @@ -139,6 +139,17 @@ struct bt_voice {
> #define BT_PHY_LE_CODED_TX 0x00002000
> #define BT_PHY_LE_CODED_RX 0x00004000
>
> +#define BT_MODE 15
> +
> +#define BT_MODE_BASIC 0x00
> +#define BT_MODE_RETRANS 0x01
> +#define BT_MODE_FLOWCTL 0x02
> +#define BT_MODE_ERTM 0x03
> +#define BT_MODE_STREAMING 0x04
> +#define BT_MODE_EXT_FLOWCTL 0x05
> +
> +#define BT_MODE_LE_FLOWCTL 0x80
> +
what I would do is just this:
BASIC 0x00
ERTM 0x01
STREAMING 0x02
LE_FLOWCTL 0x03
EXT_FLOWCTL 0x04
Trying to cling onto some old L2CAP definition from the 2.1 days is not helpful. I would really make a clean cut here.
This way we can also cleanly check the available modes per selected socket and have either setsockopt or connect fail appropriately.
> __printf(1, 2)
> void bt_info(const char *fmt, ...);
> __printf(1, 2)
> diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
> index 117ba20ea194..f2bb376c699f 100644
> --- a/net/bluetooth/l2cap_sock.c
> +++ b/net/bluetooth/l2cap_sock.c
> @@ -500,6 +500,25 @@ static int l2cap_sock_getsockopt_old(struct socket *sock, int optname,
> return err;
> }
>
> +static u8 l2cap_get_mode(struct l2cap_chan *chan)
> +{
> + switch (chan->mode) {
> + case L2CAP_MODE_BASIC:
> + case L2CAP_MODE_RETRANS:
> + case L2CAP_MODE_FLOWCTL:
> + case L2CAP_MODE_ERTM:
> + case L2CAP_MODE_STREAMING:
> + /* Mode above are the same on both old and new sockopt */
> + return chan->mode;
> + case L2CAP_MODE_LE_FLOWCTL:
> + return BT_MODE_FLOWCTL;
> + case L2CAP_MODE_EXT_FLOWCTL:
> + return BT_MODE_EXT_FLOWCTL;
> + }
> +
> + return chan->mode;
> +}
> +
Don’t bother with this. Keep the old socket and new socket independent code. I also want to add Kconfig option later that will allow us to disable the old socket options once we have SOL_L2CAP requirement eradicated.
Regards
Marcel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v3 3/3] Bluetooth: Add BT_MODE socket option
2020-03-20 0:58 ` Marcel Holtmann
@ 2020-03-20 17:44 ` Luiz Augusto von Dentz
2020-03-23 17:42 ` Marcel Holtmann
0 siblings, 1 reply; 8+ messages in thread
From: Luiz Augusto von Dentz @ 2020-03-20 17:44 UTC (permalink / raw)
To: Marcel Holtmann; +Cc: linux-bluetooth
Hi Marcel,
On Thu, Mar 19, 2020 at 5:58 PM Marcel Holtmann <marcel@holtmann.org> wrote:
>
> Hi Luiz,
>
> > This adds BT_MODE socket option which can be used to set L2CAP modes,
> > including modes only supported over LE which were not supported using
> > the L2CAP_OPTIONS.
> >
> > Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
> > ---
> > include/net/bluetooth/bluetooth.h | 11 ++++
> > net/bluetooth/l2cap_sock.c | 96 +++++++++++++++++++++++++++++++
> > 2 files changed, 107 insertions(+)
> >
> > diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
> > index 1576353a2773..34191e34bfdc 100644
> > --- a/include/net/bluetooth/bluetooth.h
> > +++ b/include/net/bluetooth/bluetooth.h
> > @@ -139,6 +139,17 @@ struct bt_voice {
> > #define BT_PHY_LE_CODED_TX 0x00002000
> > #define BT_PHY_LE_CODED_RX 0x00004000
> >
> > +#define BT_MODE 15
> > +
> > +#define BT_MODE_BASIC 0x00
> > +#define BT_MODE_RETRANS 0x01
> > +#define BT_MODE_FLOWCTL 0x02
> > +#define BT_MODE_ERTM 0x03
> > +#define BT_MODE_STREAMING 0x04
> > +#define BT_MODE_EXT_FLOWCTL 0x05
> > +
> > +#define BT_MODE_LE_FLOWCTL 0x80
> > +
>
> what I would do is just this:
>
> BASIC 0x00
> ERTM 0x01
> STREAMING 0x02
> LE_FLOWCTL 0x03
> EXT_FLOWCTL 0x04
>
> Trying to cling onto some old L2CAP definition from the 2.1 days is not helpful. I would really make a clean cut here.
Just to confirm, that means we will not going to support the old
flowctl and retransmit modes from BR/EDR with BT_MODE?
> This way we can also cleanly check the available modes per selected socket and have either setsockopt or connect fail appropriately.
>
> > __printf(1, 2)
> > void bt_info(const char *fmt, ...);
> > __printf(1, 2)
> > diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
> > index 117ba20ea194..f2bb376c699f 100644
> > --- a/net/bluetooth/l2cap_sock.c
> > +++ b/net/bluetooth/l2cap_sock.c
> > @@ -500,6 +500,25 @@ static int l2cap_sock_getsockopt_old(struct socket *sock, int optname,
> > return err;
> > }
> >
> > +static u8 l2cap_get_mode(struct l2cap_chan *chan)
> > +{
> > + switch (chan->mode) {
> > + case L2CAP_MODE_BASIC:
> > + case L2CAP_MODE_RETRANS:
> > + case L2CAP_MODE_FLOWCTL:
> > + case L2CAP_MODE_ERTM:
> > + case L2CAP_MODE_STREAMING:
> > + /* Mode above are the same on both old and new sockopt */
> > + return chan->mode;
> > + case L2CAP_MODE_LE_FLOWCTL:
> > + return BT_MODE_FLOWCTL;
> > + case L2CAP_MODE_EXT_FLOWCTL:
> > + return BT_MODE_EXT_FLOWCTL;
> > + }
> > +
> > + return chan->mode;
> > +}
> > +
>
> Don’t bother with this. Keep the old socket and new socket independent code. I also want to add Kconfig option later that will allow us to disable the old socket options once we have SOL_L2CAP requirement eradicated.
The reason I had the defines intermixed was that application would be
able to use the old sockopt to set it and then use BT_MODE to read it,
in which case I may need to store the actual socket mode separately
from the chan->mode and then perhaps fail if application attempt to
read it with BT_MODE if was not set using it.
> Regards
>
> Marcel
>
--
Luiz Augusto von Dentz
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v3 3/3] Bluetooth: Add BT_MODE socket option
2020-03-20 17:44 ` Luiz Augusto von Dentz
@ 2020-03-23 17:42 ` Marcel Holtmann
2020-03-23 18:39 ` Luiz Augusto von Dentz
0 siblings, 1 reply; 8+ messages in thread
From: Marcel Holtmann @ 2020-03-23 17:42 UTC (permalink / raw)
To: Luiz Augusto von Dentz; +Cc: linux-bluetooth
Hi Luiz,
>>> This adds BT_MODE socket option which can be used to set L2CAP modes,
>>> including modes only supported over LE which were not supported using
>>> the L2CAP_OPTIONS.
>>>
>>> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
>>> ---
>>> include/net/bluetooth/bluetooth.h | 11 ++++
>>> net/bluetooth/l2cap_sock.c | 96 +++++++++++++++++++++++++++++++
>>> 2 files changed, 107 insertions(+)
>>>
>>> diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
>>> index 1576353a2773..34191e34bfdc 100644
>>> --- a/include/net/bluetooth/bluetooth.h
>>> +++ b/include/net/bluetooth/bluetooth.h
>>> @@ -139,6 +139,17 @@ struct bt_voice {
>>> #define BT_PHY_LE_CODED_TX 0x00002000
>>> #define BT_PHY_LE_CODED_RX 0x00004000
>>>
>>> +#define BT_MODE 15
>>> +
>>> +#define BT_MODE_BASIC 0x00
>>> +#define BT_MODE_RETRANS 0x01
>>> +#define BT_MODE_FLOWCTL 0x02
>>> +#define BT_MODE_ERTM 0x03
>>> +#define BT_MODE_STREAMING 0x04
>>> +#define BT_MODE_EXT_FLOWCTL 0x05
>>> +
>>> +#define BT_MODE_LE_FLOWCTL 0x80
>>> +
>>
>> what I would do is just this:
>>
>> BASIC 0x00
>> ERTM 0x01
>> STREAMING 0x02
>> LE_FLOWCTL 0x03
>> EXT_FLOWCTL 0x04
>>
>> Trying to cling onto some old L2CAP definition from the 2.1 days is not helpful. I would really make a clean cut here.
>
> Just to confirm, that means we will not going to support the old
> flowctl and retransmit modes from BR/EDR with BT_MODE?
we currently don’t support these two modes, nor are there any specs that require it.
>> This way we can also cleanly check the available modes per selected socket and have either setsockopt or connect fail appropriately.
>>
>>> __printf(1, 2)
>>> void bt_info(const char *fmt, ...);
>>> __printf(1, 2)
>>> diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
>>> index 117ba20ea194..f2bb376c699f 100644
>>> --- a/net/bluetooth/l2cap_sock.c
>>> +++ b/net/bluetooth/l2cap_sock.c
>>> @@ -500,6 +500,25 @@ static int l2cap_sock_getsockopt_old(struct socket *sock, int optname,
>>> return err;
>>> }
>>>
>>> +static u8 l2cap_get_mode(struct l2cap_chan *chan)
>>> +{
>>> + switch (chan->mode) {
>>> + case L2CAP_MODE_BASIC:
>>> + case L2CAP_MODE_RETRANS:
>>> + case L2CAP_MODE_FLOWCTL:
>>> + case L2CAP_MODE_ERTM:
>>> + case L2CAP_MODE_STREAMING:
>>> + /* Mode above are the same on both old and new sockopt */
>>> + return chan->mode;
>>> + case L2CAP_MODE_LE_FLOWCTL:
>>> + return BT_MODE_FLOWCTL;
>>> + case L2CAP_MODE_EXT_FLOWCTL:
>>> + return BT_MODE_EXT_FLOWCTL;
>>> + }
>>> +
>>> + return chan->mode;
>>> +}
>>> +
>>
>> Don’t bother with this. Keep the old socket and new socket independent code. I also want to add Kconfig option later that will allow us to disable the old socket options once we have SOL_L2CAP requirement eradicated.
>
> The reason I had the defines intermixed was that application would be
> able to use the old sockopt to set it and then use BT_MODE to read it,
> in which case I may need to store the actual socket mode separately
> from the chan->mode and then perhaps fail if application attempt to
> read it with BT_MODE if was not set using it.
If someone used L2CAP_OTIONS, then just lets fail BT_MODE read and write.
Regards
Marcel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v3 3/3] Bluetooth: Add BT_MODE socket option
2020-03-23 17:42 ` Marcel Holtmann
@ 2020-03-23 18:39 ` Luiz Augusto von Dentz
0 siblings, 0 replies; 8+ messages in thread
From: Luiz Augusto von Dentz @ 2020-03-23 18:39 UTC (permalink / raw)
To: Marcel Holtmann; +Cc: linux-bluetooth
Hi Marcel.
On Mon, Mar 23, 2020 at 10:42 AM Marcel Holtmann <marcel@holtmann.org> wrote:
>
> Hi Luiz,
>
> >>> This adds BT_MODE socket option which can be used to set L2CAP modes,
> >>> including modes only supported over LE which were not supported using
> >>> the L2CAP_OPTIONS.
> >>>
> >>> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
> >>> ---
> >>> include/net/bluetooth/bluetooth.h | 11 ++++
> >>> net/bluetooth/l2cap_sock.c | 96 +++++++++++++++++++++++++++++++
> >>> 2 files changed, 107 insertions(+)
> >>>
> >>> diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
> >>> index 1576353a2773..34191e34bfdc 100644
> >>> --- a/include/net/bluetooth/bluetooth.h
> >>> +++ b/include/net/bluetooth/bluetooth.h
> >>> @@ -139,6 +139,17 @@ struct bt_voice {
> >>> #define BT_PHY_LE_CODED_TX 0x00002000
> >>> #define BT_PHY_LE_CODED_RX 0x00004000
> >>>
> >>> +#define BT_MODE 15
> >>> +
> >>> +#define BT_MODE_BASIC 0x00
> >>> +#define BT_MODE_RETRANS 0x01
> >>> +#define BT_MODE_FLOWCTL 0x02
> >>> +#define BT_MODE_ERTM 0x03
> >>> +#define BT_MODE_STREAMING 0x04
> >>> +#define BT_MODE_EXT_FLOWCTL 0x05
> >>> +
> >>> +#define BT_MODE_LE_FLOWCTL 0x80
> >>> +
> >>
> >> what I would do is just this:
> >>
> >> BASIC 0x00
> >> ERTM 0x01
> >> STREAMING 0x02
> >> LE_FLOWCTL 0x03
> >> EXT_FLOWCTL 0x04
> >>
> >> Trying to cling onto some old L2CAP definition from the 2.1 days is not helpful. I would really make a clean cut here.
> >
> > Just to confirm, that means we will not going to support the old
> > flowctl and retransmit modes from BR/EDR with BT_MODE?
>
> we currently don’t support these two modes, nor are there any specs that require it.
Right, it seems we didn't validate these modes in L2CAP_OPTION though,
I left that unchanged in the last set.
> >> This way we can also cleanly check the available modes per selected socket and have either setsockopt or connect fail appropriately.
> >>
> >>> __printf(1, 2)
> >>> void bt_info(const char *fmt, ...);
> >>> __printf(1, 2)
> >>> diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
> >>> index 117ba20ea194..f2bb376c699f 100644
> >>> --- a/net/bluetooth/l2cap_sock.c
> >>> +++ b/net/bluetooth/l2cap_sock.c
> >>> @@ -500,6 +500,25 @@ static int l2cap_sock_getsockopt_old(struct socket *sock, int optname,
> >>> return err;
> >>> }
> >>>
> >>> +static u8 l2cap_get_mode(struct l2cap_chan *chan)
> >>> +{
> >>> + switch (chan->mode) {
> >>> + case L2CAP_MODE_BASIC:
> >>> + case L2CAP_MODE_RETRANS:
> >>> + case L2CAP_MODE_FLOWCTL:
> >>> + case L2CAP_MODE_ERTM:
> >>> + case L2CAP_MODE_STREAMING:
> >>> + /* Mode above are the same on both old and new sockopt */
> >>> + return chan->mode;
> >>> + case L2CAP_MODE_LE_FLOWCTL:
> >>> + return BT_MODE_FLOWCTL;
> >>> + case L2CAP_MODE_EXT_FLOWCTL:
> >>> + return BT_MODE_EXT_FLOWCTL;
> >>> + }
> >>> +
> >>> + return chan->mode;
> >>> +}
> >>> +
> >>
> >> Don’t bother with this. Keep the old socket and new socket independent code. I also want to add Kconfig option later that will allow us to disable the old socket options once we have SOL_L2CAP requirement eradicated.
> >
> > The reason I had the defines intermixed was that application would be
> > able to use the old sockopt to set it and then use BT_MODE to read it,
> > in which case I may need to store the actual socket mode separately
> > from the chan->mode and then perhaps fail if application attempt to
> > read it with BT_MODE if was not set using it.
>
> If someone used L2CAP_OTIONS, then just lets fail BT_MODE read and write.
Right, Ive made it fail with lastest change, I can probably have a
flag to make it exclusively thogh with one or another, I will send an
update shortly.
> Regards
>
> Marcel
>
--
Luiz Augusto von Dentz
^ permalink raw reply [flat|nested] 8+ messages in thread