* [Buildroot] craneborad and buildroot
@ 2012-02-20 15:20 Mohamed HAMZAOUI
2012-02-23 15:30 ` [Buildroot] [buildroot]craneborad " Mohamed HAMZAOUI
0 siblings, 1 reply; 2+ messages in thread
From: Mohamed HAMZAOUI @ 2012-02-20 15:20 UTC (permalink / raw)
To: buildroot
Hello,
I recently purchased a development board type CraneBoard...
My problem is with configuration files : MLO, u-boot.bin and uImage.
I installed the last RC buildroot and after I started to configure the build
by selecting the desired setting ...
In the configuration of the bootloader I checked xloader and uboot. With
uboot I found a configuration file to my card "am3517_crane" but, for
xloader, I haven't found anything and I cannot generate the correspendant
MLO .
I copy MLO, which was provided for Angstrom distrib for my card (compiled
whith openembedded) but I cannot load the u-boot. suddenly, I also tried
copying uboot that provided with the same distrib of MLO and then I start but
I am blocked on: "booting the kernel"!
Could you tell me why i have this freeze ?
Could you tell me what I do with buildroot to find the xloader configuration
file to my card ?
thnx
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20120220/9ae00e7a/attachment-0001.html>
^ permalink raw reply [flat|nested] 2+ messages in thread
* [Buildroot] [buildroot]craneborad and buildroot
2012-02-20 15:20 [Buildroot] craneborad and buildroot Mohamed HAMZAOUI
@ 2012-02-23 15:30 ` Mohamed HAMZAOUI
0 siblings, 0 replies; 2+ messages in thread
From: Mohamed HAMZAOUI @ 2012-02-23 15:30 UTC (permalink / raw)
To: buildroot
Hi,
I want to use Buildroot for CraneBoard...
My problem is with configuration files : MLO, u-boot.bin and uImage.
I installed the last RC buildroot and after I started to configure the build
by selecting the desired setting because i dont found a defconfig file for
Kernel with buildroot ...
In the configuration of the bootloader I checked xloader and uboot. With
uboot I found a configuration file to my card "am3517_crane" but, for
xloader, I haven't found anything and I cannot generate the correspendant
MLO .
I copy MLO, which was provided for Angstrom distrib for my card (compiled
whith openembedded) but I cannot load the u-boot. suddenly, I also tried
copying uboot that provided with the same distrib of MLO and then I start but
I am blocked on: "booting the kernel"!
Could you tell me why i have this freeze ?
Could you tell me what I do with buildroot to find the xloader configuration
file to my card ?
thnx
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20120223/84876a75/attachment-0001.html>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-02-23 15:30 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-02-20 15:20 [Buildroot] craneborad and buildroot Mohamed HAMZAOUI
2012-02-23 15:30 ` [Buildroot] [buildroot]craneborad " Mohamed HAMZAOUI
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.