* [bug][5.12-rc8] It sounds like madness but nvme controller is down when I plug at the same time 3.5 jack headphones and USB headset to MB.
@ 2021-04-23 22:56 Mikhail Gavrilov
0 siblings, 0 replies; only message in thread
From: Mikhail Gavrilov @ 2021-04-23 22:56 UTC (permalink / raw)
To: linux-usb, Linux List Kernel Mailing, linux-block, kbusch, luto
Hi,
It sounds like madness but "nvme controller is down" when I plug at
the same time 3.5 jack headphones and USB headset to MB.
This really scares me because I've never seen such an easy way to make
a system broken.
The most offensive thing is that in the kernel logs nothing strange is
visible except for connecting a USB device and disabling the nvme
controller.
[ 510.573670] usb 1-3.3.4: new full-speed USB device number 23 using xhci_hcd
[ 510.968115] usb 1-3.3.4: New USB device found, idVendor=1b1c,
idProduct=0a5f, bcdDevice= 1.03
[ 510.968125] usb 1-3.3.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 510.968129] usb 1-3.3.4: Product: CORSAIR HS60 HAPTIC Gaming Headset
[ 510.968132] usb 1-3.3.4: Manufacturer: CORSAIR COMPONENTS, INC.
[ 511.896484] input: CORSAIR COMPONENTS, INC. CORSAIR HS60 HAPTIC
Gaming Headset Consumer Control as
/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:06:00.1/usb1/1-3/1-3.3/1-3.3.4/1-3.3.4:1.3/0003:1B1C:0A5F.0019/input/input61
[ 511.947854] input: CORSAIR COMPONENTS, INC. CORSAIR HS60 HAPTIC
Gaming Headset as
/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:06:00.1/usb1/1-3/1-3.3/1-3.3.4/1-3.3.4:1.3/0003:1B1C:0A5F.0019/input/input62
[ 511.948023] hid-generic 0003:1B1C:0A5F.0019:
input,hiddev99,hidraw5: USB HID v1.11 Device [CORSAIR COMPONENTS, INC.
CORSAIR HS60 HAPTIC Gaming Headset] on usb-0000:06:00.1-3.3.4/input3
[ 517.603789] nvme nvme0: controller is down; will reset:
CSTS=0xffffffff, PCI_STATUS=0xffff
[ 517.636775] nvme 0000:01:00.0: can't change power state from D3hot
to D0 (config space inaccessible)
[ 517.636899] nvme nvme0: Removing after probe failure status: -19
[ 517.654772] nvme0n1: detected capacity change from 937703088 to 0
[ 517.654778] blk_update_request: I/O error, dev nvme0n1, sector
5632792 op 0x1:(WRITE) flags 0x100000 phys_seg 1 prio class 0
[ 517.654781] blk_update_request: I/O error, dev nvme0n1, sector
105981294 op 0x1:(WRITE) flags 0x9800 phys_seg 1 prio class 0
[ 517.654795] XFS (nvme0n1p2): log I/O error -5
[ 517.654794] blk_update_request: I/O error, dev nvme0n1, sector
3099104 op 0x1:(WRITE) flags 0x1000 phys_seg 3 prio class 0
[ 517.654798] nvme0n1p2: writeback error on inode 90909, offset
3129344, sector 5632800
[ 517.654805] blk_update_request: I/O error, dev nvme0n1, sector
5632728 op 0x1:(WRITE) flags 0x100000 phys_seg 1 prio class 0
[ 517.654812] nvme0n1p2: writeback error on inode 90909, offset
3096576, sector 5632736
[ 517.654812] XFS (nvme0n1p2): xfs_do_force_shutdown(0x2) called from
line 1272 of file fs/xfs/xfs_log.c. Return address = 000000000bfa0ccf
The issue is reproducing on my system. I checked all the contacts for
a bad connection. Even when I expose the motherboard and connectors to
mechanical stress, nothing happens. So it doesn't look like a hardware
fault.
$ git blame drivers/nvme/host/pci.c -L 1239,1259
b2a0eb1a0ac72 drivers/nvme/host/pci.c (Keith Busch 2017-06-07
20:32:50 +0200 1239) static void nvme_warn_reset(struct nvme_dev *dev,
u32 csts)
b2a0eb1a0ac72 drivers/nvme/host/pci.c (Keith Busch 2017-06-07
20:32:50 +0200 1240) {
b2a0eb1a0ac72 drivers/nvme/host/pci.c (Keith Busch 2017-06-07
20:32:50 +0200 1241) /* Read a config register to help see what
died. */
b2a0eb1a0ac72 drivers/nvme/host/pci.c (Keith Busch 2017-06-07
20:32:50 +0200 1242) u16 pci_status;
b2a0eb1a0ac72 drivers/nvme/host/pci.c (Keith Busch 2017-06-07
20:32:50 +0200 1243) int result;
b2a0eb1a0ac72 drivers/nvme/host/pci.c (Keith Busch 2017-06-07
20:32:50 +0200 1244)
b2a0eb1a0ac72 drivers/nvme/host/pci.c (Keith Busch 2017-06-07
20:32:50 +0200 1245) result =
pci_read_config_word(to_pci_dev(dev->dev), PCI_STATUS,
b2a0eb1a0ac72 drivers/nvme/host/pci.c (Keith Busch 2017-06-07
20:32:50 +0200 1246) &pci_status);
b2a0eb1a0ac72 drivers/nvme/host/pci.c (Keith Busch 2017-06-07
20:32:50 +0200 1247) if (result == PCIBIOS_SUCCESSFUL)
b2a0eb1a0ac72 drivers/nvme/host/pci.c (Keith Busch 2017-06-07
20:32:50 +0200 1248) dev_warn(dev->ctrl.device,
b2a0eb1a0ac72 drivers/nvme/host/pci.c (Keith Busch 2017-06-07
20:32:50 +0200 1249) "controller is down; will
reset: CSTS=0x%x, PCI_STATUS=0x%hx\n",
b2a0eb1a0ac72 drivers/nvme/host/pci.c (Keith Busch 2017-06-07
20:32:50 +0200 1250) csts, pci_status);
b2a0eb1a0ac72 drivers/nvme/host/pci.c (Keith Busch 2017-06-07
20:32:50 +0200 1251) else
b2a0eb1a0ac72 drivers/nvme/host/pci.c (Keith Busch 2017-06-07
20:32:50 +0200 1252) dev_warn(dev->ctrl.device,
b2a0eb1a0ac72 drivers/nvme/host/pci.c (Keith Busch 2017-06-07
20:32:50 +0200 1253) "controller is down; will
reset: CSTS=0x%x, PCI_STATUS read failed (%d)\n",
b2a0eb1a0ac72 drivers/nvme/host/pci.c (Keith Busch 2017-06-07
20:32:50 +0200 1254) csts, result);
b2a0eb1a0ac72 drivers/nvme/host/pci.c (Keith Busch 2017-06-07
20:32:50 +0200 1255) }
b2a0eb1a0ac72 drivers/nvme/host/pci.c (Keith Busch 2017-06-07
20:32:50 +0200 1256)
31c7c7d2c9f17 drivers/nvme/host/pci.c (Christoph Hellwig 2015-10-22
14:03:35 +0200 1257) static enum blk_eh_timer_return
nvme_timeout(struct request *req, bool reserved)
c30341dc3c436 drivers/block/nvme-core.c (Keith Busch 2013-12-10
13:10:38 -0700 1258) {
f4800d6d1548e drivers/nvme/host/pci.c (Christoph Hellwig 2015-11-28
15:43:10 +0100 1259) struct nvme_iod *iod =
blk_mq_rq_to_pdu(req);
Andy and Keith excuse me, but you wrote code which said to me that
"controller is down". Can you help me clarify what is really happening
here?
I can apply patches for verbose messages for understanding why block
layers depend on USB and audio devices.
My hardware:
# inxi -F
System: Host: fedora Kernel: 5.12.0-0.rc8.191.fc35.x86_64+debug
x86_64 bits: 64 Console: tty pts/0
Distro: Fedora release 35 (Rawhide)
Machine: Type: Desktop Mobo: ASUSTeK model: ROG STRIX X570-I GAMING
v: Rev X.0x serial: 190958552300672
UEFI: American Megatrends v: 3603 date: 03/20/2021
CPU: Info: 16-Core (2-Die) model: AMD Ryzen 9 3950X bits: 64
type: MT MCP MCM cache: L2: 8 MiB
Speed: 2056 MHz min/max: 2200/3500 MHz Core speeds (MHz):
1: 2056 2: 3598 3: 2056 4: 3598 5: 2056 6: 2056 7: 3600
8: 2057 9: 2056 10: 3599 11: 2056 12: 2398 13: 2057 14:
2198 15: 2198 16: 2200 17: 2200 18: 3593 19: 2056 20: 2054
21: 3599 22: 2055 23: 2056 24: 2398 25: 3600 26: 2056 27:
2197 28: 2200 29: 2199 30: 2201 31: 3606 32: 2056
Graphics: Device-1: Advanced Micro Devices [AMD/ATI] Navi 21 [Radeon
RX 6800/6800 XT / 6900 XT] driver: amdgpu v: kernel
Device-2: AVerMedia Live Streamer CAM 513 type: USB driver:
hid-generic,usbhid,uvcvideo
Display: server: X.org 1.20.11 driver: loaded: amdgpu note:
n/a (using device driver) tty: 238x53
Message: Advanced graphics data unavailable in console for root.
Audio: Device-1: Advanced Micro Devices [AMD/ATI] driver: snd_hda_intel
Device-2: Advanced Micro Devices [AMD] Starship/Matisse HD
Audio driver: snd_hda_intel
Device-3: Kingston HyperX Cloud Orbit S Hi-Res 2Ch type:
USB driver: hid-generic,snd-usb-audio,usbhid
Device-4: AVerMedia Live Streamer CAM 513 type: USB driver:
hid-generic,snd-usb-audio,usbhid
Device-5: Corsair CORSAIR HS60 HAPTIC Gaming Headset type:
USB driver: hid-generic,snd-usb-audio,usbhid
Sound Server-1: ALSA v: k5.12.0-0.rc8.191.fc35.x86_64+debug
running: yes
Sound Server-2: PipeWire v: 0.3.26 running: yes
Network: Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi
IF: wlp4s0 state: down mac: fe:0f:cb:73:b4:f0
Device-2: Intel I211 Gigabit Network driver: igb
IF: enp5s0 state: up speed: 1000 Mbps duplex: full mac:
a8:5e:45:50:a6:59
Bluetooth: Device-1: Intel AX200 Bluetooth type: USB driver: btusb
Report: This feature requires one of these tools:
hciconfig/bt-adapter
Drives: Local Storage: total: 16.81 TiB used: 5.71 TiB (33.9%)
ID-1: /dev/nvme0n1 vendor: Intel model: SSDPE21D480GA size:
447.13 GiB
ID-2: /dev/sda vendor: Western Digital model:
WUH721818ALE6L4 size: 16.37 TiB
Partition: ID-1: / size: 99.95 GiB used: 8.66 GiB (8.7%) fs: xfs dev:
/dev/nvme0n1p2
ID-2: /boot/efi size: 511 MiB used: 20.4 MiB (4.0%) fs:
vfat dev: /dev/nvme0n1p1
ID-3: /home size: 16.37 TiB used: 5.7 TiB (34.8%) fs: xfs
dev: /dev/sda1
Swap: ID-1: swap-1 type: partition size: 64 GiB used: 0 KiB
(0.0%) dev: /dev/nvme0n1p3
ID-2: swap-2 type: zram size: 8 GiB used: 0 KiB (0.0%) dev:
/dev/zram0
Sensors: System Temperatures: cpu: 51.2 C mobo: N/A gpu: amdgpu temp: 55.0 C
Fan Speeds (RPM): N/A gpu: amdgpu fan: 561
Info: Processes: 495 Uptime: 1m Memory: 62.63 GiB used: 1.75 GiB
(2.8%) Init: systemd runlevel: 5 Shell: Bash
inxi: 3.3.03
Full logs:
[1] https://pastebin.com/ndsqaj4X
[2] https://pastebin.com/J5wjipwN
[3] https://pastebin.com/ZvvcjMzg
--
Best Regards,
Mike Gavrilov.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2021-04-23 22:56 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-23 22:56 [bug][5.12-rc8] It sounds like madness but nvme controller is down when I plug at the same time 3.5 jack headphones and USB headset to MB Mikhail Gavrilov
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.