* [PATCH linux dev-5.10] ARM: dts: aspeed: Add TYAN S7106 BMC machine
@ 2021-09-07 20:52 Oskar Senft
2021-09-07 23:44 ` Oskar Senft
2021-09-08 1:14 ` Jeremy Kerr
0 siblings, 2 replies; 3+ messages in thread
From: Oskar Senft @ 2021-09-07 20:52 UTC (permalink / raw)
To: openbmc, joel; +Cc: Oskar Senft, Ed Tanous, Vijay Khemka, Jason Hargis
The TYAN S7106 is a server platform with an ASPEED AST2500 BMC.
Submitted to upstream in
https://lists.ozlabs.org/pipermail/linux-aspeed/2021-September/006326.html
Signed-off-by: Oskar Senft <osk@google.com>
---
arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts | 415 ++++++++++++++++++++
1 file changed, 415 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
diff --git a/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
new file mode 100644
index 000000000000..292bfb1a4bb2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
@@ -0,0 +1,415 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "Tyan S7106 BMC";
+ compatible = "tyan,s7106-bmc", "aspeed,ast2500";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ p2a_memory: region@987F0000 {
+ no-map;
+ reg = <0x987F0000 0x00010000>; /* 64KB */
+ };
+
+ vga_memory: framebuffer@9f000000 {
+ no-map;
+ reg = <0x9f000000 0x01000000>; /* 16M */
+ };
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>; /* 16M */
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ identify {
+ gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ heartbeat {
+ gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+ <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+ <&adc 12>, <&adc 13>, <&adc 14>;
+ };
+
+ iio-hwmon-battery {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 15>;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ label = "bmc";
+ status = "okay";
+ m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash@0 {
+ status = "okay";
+ label = "pnor";
+ m25p,fast-read;
+ };
+};
+
+&uart1 {
+ /* Rear RS-232 connector */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default>;
+};
+
+&uart2 {
+ /* RS-232 connector on header */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd2_default
+ &pinctrl_rxd2_default>;
+};
+
+&uart3 {
+ /* Alternative to vuart to internally connect (route) to uart1
+ * when vuart cannot be used due to BIOS limitations.
+ */
+ status = "okay";
+};
+
+&uart4 {
+ /* Alternative to vuart to internally connect (route) to the
+ * external port usually used by uart1 when vuart cannot be
+ * used due to BIOS limitations.
+ */
+ status = "okay";
+};
+
+&uart5 {
+ /* BMC "debug" (console) UART; connected to RS-232 connector
+ * on header; selectable via jumpers as alternative to uart2
+ */
+ status = "okay";
+};
+
+&vuart {
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+};
+
+&p2a {
+ status = "okay";
+ memory-region = <&p2a_memory>;
+};
+
+&lpc_snoop {
+ status = "okay";
+ snoop-ports = <0x80>;
+};
+
+&adc {
+ status = "okay";
+};
+
+&vhub {
+ status = "okay";
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default
+ &pinctrl_pwm1_default
+ &pinctrl_pwm3_default
+ &pinctrl_pwm4_default>;
+
+ /* CPU fan #0 */
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ /* CPU fan #1 */
+ fan@1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+
+ /* PWM group for chassis fans #1, #2, #3 and #4 */
+ fan@2 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan@3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+ };
+
+ fan@4 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+ };
+
+ fan@5 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+ };
+
+ /* PWM group for chassis fans #5 and #6 */
+ fan@6 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+ };
+
+ fan@7 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ /* Hardware monitor with temperature sensors */
+ nct7802@28 {
+ compatible = "nuvoton,nct7802";
+ reg = <0x28>;
+ };
+
+ /* Also connected to:
+ * - IPMB pin header
+ * - CPU #0 memory error LED @ 0x3A
+ * - CPU #1 memory error LED @ 0x3C
+ */
+};
+
+&i2c1 {
+ /* Directly connected to PCH SMBUS #0 */
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+
+ /* BMC EEPROM, incl. mainboard FRU */
+ eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+
+ /* Also connected to:
+ * - fan header
+ * - mini-SAS HD connector
+ * - SSATA SGPIO
+ * - via switch (BMC_SMB3_PCH_IE_SML3_EN, active low) to PCH SMBUS #3
+ */
+};
+
+&i2c3 {
+ status = "okay";
+
+ /* PSU1 FRU @ 0xA0 */
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+
+ /* PSU2 FRU @ 0xA2 */
+ eeprom@51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ };
+
+ /* PSU1 @ 0xB0 */
+ power-supply@58 {
+ compatible = "pmbus";
+ reg = <0x58>;
+ };
+
+ /* PSU2 @ 0xB2 */
+ power-supply@59 {
+ compatible = "pmbus";
+ reg = <0x59>;
+ };
+
+ /* Also connected to:
+ * - PCH SMBUS #1
+ */
+};
+
+&i2c4 {
+ status = "okay";
+
+ /* Connected to:
+ * - PCH SMBUS #2
+ */
+
+ /* Connected via switch to:
+ * - CPU #0 channels ABC VDDQ @ 0x80
+ * - CPU #0 channels DEF VDDQ @ 0x81
+ * - CPU #1 channels ABC VDDQ @ 0x82
+ * - CPU #1 channels DEF VDDQ @ 0x83
+ * - CPU #0 VCCIO & VMCP @ 0x52
+ * - CPU #1 VCCIO & VMCP @ 0x53
+ * - CPU #0 VCCIN @ 0xC0
+ * - CPU #0 VSA @ 0xC2
+ * - CPU #1 VCCIN @ 0xC4
+ * - CPU #1 VSA @ 0xC6
+ * - J110
+ */
+};
+
+&i2c5 {
+ status = "okay";
+
+ /* Connected via switch (PCH_BMC_SMB_SW_P) to:
+ * - mainboard FRU @ 0xAE
+ * - XDP connector
+ * - ME debug header
+ * - clock buffer @ 0xD8
+ * - i2c4 via switch (PCH_VR_SMBUS_SW_P; controlled by PCH)
+ * - PCH SMBUS
+ */
+};
+
+&i2c6 {
+ status = "okay";
+
+ /* Connected via switch (BMC_PE_SMB_EN_1_N) to
+ * bus mux (selector BMC_PE_SMB_SW_BIT[1..0]) to:
+ * - 0,0: PCIE slot 1, SMB #1
+ * - 0,1: PCIE slot 1, SMB #2
+ * - 1,0: PCIE slot 2, SMB #1
+ * - 1,1: PCIE slot 2, SMB #2
+ */
+
+ /* Connected via switch (BMC_PE_SMB_EN_2_N) to
+ * bus mux (selector BMC_PE_SMB_SW_BIT[1..0]) to:
+ * - 0,0: OCP0 (A) SMB
+ * - 0,1: OCP0 (C) SMB
+ * - 1,0: OCP1 (A) SMB
+ * - 1,1: NC
+ */
+};
+
+&i2c7 {
+ status = "okay";
+
+ /* Connected to:
+ * - PCH SMBUS #4
+ */
+};
+
+&i2c8 {
+ status = "okay";
+
+ /* Not connected */
+};
+
+&mac0 {
+ status = "okay";
+
+ use-ncsi;
+ no-hw-checksum;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&mac1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&ibt {
+ status = "okay";
+};
+
+&kcs1 {
+ status = "okay";
+ kcs_addr = <0xca8>;
+};
+
+&kcs3 {
+ status = "okay";
+ kcs_addr = <0xca2>;
+};
+
+&gfx {
+ status = "okay";
+ memory-region = <&gfx_memory>;
+};
+
+&gpio {
+ status = "okay";
+ gpio-line-names =
+ /*A0-A7*/ "","","IDLED_N","","","","","",
+ /*B0-B7*/ "","","","","","","","",
+ /*C0-C7*/ "","","","","ID_BUTTON","POST_COMPLETE","","",
+ /*D0-D7*/ "","","PS_PWROK","PLTRST_N","","","","",
+ /*E0-E7*/ "POWER_BUTTON","POWER_OUT","RESET_BUTTON","RESET_OUT",
+ "NMI_BUTTON","NMI_OUT","","HEARTBEAT_LED_N",
+ /*F0-F7*/ "","CLEAR_CMOS_N","","","IPMI_ALERT_LED_N","","","",
+ /*G0-G7*/ "BMC_PE_SMB_EN_1_N","BMC_PE_SMB_EN_2_N","","","","","","",
+ /*H0-H7*/ "","","","","","","","",
+ /*I0-I7*/ "","","","","","","","",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "","","","","","","","",
+ /*N0-N7*/ "","","","","","","","",
+ /*O0-O7*/ "","","","","","","","",
+ /*P0-P7*/ "","","","","","","","",
+ /*Q0-Q7*/ "","","","","BMC_PE_SMB_SW_BIT0","BMC_PE_SMB_SW_BIT1","","",
+ /*R0-R7*/ "","","","","","","","",
+ /*S0-S7*/ "","","","","","","","",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "","","","","","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","","","","","","","",
+ /*Z0-Z7*/ "","","","","","","","",
+ /*AA0-AA7*/ "","","","BMC_SMB3_PCH_IE_SML3_EN","","","","",
+ /*AB0-AB7*/ "","","","","","","","";
+};
--
2.33.0.309.g3052b89438-goog
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH linux dev-5.10] ARM: dts: aspeed: Add TYAN S7106 BMC machine
2021-09-07 20:52 [PATCH linux dev-5.10] ARM: dts: aspeed: Add TYAN S7106 BMC machine Oskar Senft
@ 2021-09-07 23:44 ` Oskar Senft
2021-09-08 1:14 ` Jeremy Kerr
1 sibling, 0 replies; 3+ messages in thread
From: Oskar Senft @ 2021-09-07 23:44 UTC (permalink / raw)
To: openbmc, joel; +Cc: Ed Tanous, Vijay Khemka, Jason Hargis
I'm working with Joel Stanley <joel@jms.id.au> on the review of the
upstream change, so this commit can be ignored for now. I'll re-send
as V2 as soon as the upstream change is complete.
Oskar.
On Tue, Sep 7, 2021 at 4:52 PM Oskar Senft <osk@google.com> wrote:
>
> The TYAN S7106 is a server platform with an ASPEED AST2500 BMC.
>
> Submitted to upstream in
> https://lists.ozlabs.org/pipermail/linux-aspeed/2021-September/006326.html
>
> Signed-off-by: Oskar Senft <osk@google.com>
> ---
> arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts | 415 ++++++++++++++++++++
> 1 file changed, 415 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
> new file mode 100644
> index 000000000000..292bfb1a4bb2
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
> @@ -0,0 +1,415 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/dts-v1/;
> +
> +#include "aspeed-g5.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +
> +/ {
> + model = "Tyan S7106 BMC";
> + compatible = "tyan,s7106-bmc", "aspeed,ast2500";
> +
> + chosen {
> + stdout-path = &uart5;
> + bootargs = "console=ttyS4,115200 earlyprintk";
> + };
> +
> + memory@80000000 {
> + device_type = "memory";
> + reg = <0x80000000 0x20000000>;
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + p2a_memory: region@987F0000 {
> + no-map;
> + reg = <0x987F0000 0x00010000>; /* 64KB */
> + };
> +
> + vga_memory: framebuffer@9f000000 {
> + no-map;
> + reg = <0x9f000000 0x01000000>; /* 16M */
> + };
> +
> + gfx_memory: framebuffer {
> + size = <0x01000000>; /* 16M */
> + alignment = <0x01000000>;
> + compatible = "shared-dma-pool";
> + reusable;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + identify {
> + gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
> + };
> +
> + heartbeat {
> + gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + iio-hwmon {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
> + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
> + <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
> + <&adc 12>, <&adc 13>, <&adc 14>;
> + };
> +
> + iio-hwmon-battery {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 15>;
> + };
> +};
> +
> +&fmc {
> + status = "okay";
> + flash@0 {
> + label = "bmc";
> + status = "okay";
> + m25p,fast-read;
> +#include "openbmc-flash-layout.dtsi"
> + };
> +};
> +
> +&spi1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi1_default>;
> +
> + flash@0 {
> + status = "okay";
> + label = "pnor";
> + m25p,fast-read;
> + };
> +};
> +
> +&uart1 {
> + /* Rear RS-232 connector */
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_txd1_default
> + &pinctrl_rxd1_default>;
> +};
> +
> +&uart2 {
> + /* RS-232 connector on header */
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_txd2_default
> + &pinctrl_rxd2_default>;
> +};
> +
> +&uart3 {
> + /* Alternative to vuart to internally connect (route) to uart1
> + * when vuart cannot be used due to BIOS limitations.
> + */
> + status = "okay";
> +};
> +
> +&uart4 {
> + /* Alternative to vuart to internally connect (route) to the
> + * external port usually used by uart1 when vuart cannot be
> + * used due to BIOS limitations.
> + */
> + status = "okay";
> +};
> +
> +&uart5 {
> + /* BMC "debug" (console) UART; connected to RS-232 connector
> + * on header; selectable via jumpers as alternative to uart2
> + */
> + status = "okay";
> +};
> +
> +&vuart {
> + status = "okay";
> +};
> +
> +&lpc_ctrl {
> + status = "okay";
> +};
> +
> +&p2a {
> + status = "okay";
> + memory-region = <&p2a_memory>;
> +};
> +
> +&lpc_snoop {
> + status = "okay";
> + snoop-ports = <0x80>;
> +};
> +
> +&adc {
> + status = "okay";
> +};
> +
> +&vhub {
> + status = "okay";
> +};
> +
> +&pwm_tacho {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm0_default
> + &pinctrl_pwm1_default
> + &pinctrl_pwm3_default
> + &pinctrl_pwm4_default>;
> +
> + /* CPU fan #0 */
> + fan@0 {
> + reg = <0x00>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x00>;
> + };
> +
> + /* CPU fan #1 */
> + fan@1 {
> + reg = <0x01>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x01>;
> + };
> +
> + /* PWM group for chassis fans #1, #2, #3 and #4 */
> + fan@2 {
> + reg = <0x03>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x02>;
> + };
> +
> + fan@3 {
> + reg = <0x03>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x03>;
> + };
> +
> + fan@4 {
> + reg = <0x03>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x04>;
> + };
> +
> + fan@5 {
> + reg = <0x03>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x05>;
> + };
> +
> + /* PWM group for chassis fans #5 and #6 */
> + fan@6 {
> + reg = <0x04>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x06>;
> + };
> +
> + fan@7 {
> + reg = <0x04>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x07>;
> + };
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + /* Hardware monitor with temperature sensors */
> + nct7802@28 {
> + compatible = "nuvoton,nct7802";
> + reg = <0x28>;
> + };
> +
> + /* Also connected to:
> + * - IPMB pin header
> + * - CPU #0 memory error LED @ 0x3A
> + * - CPU #1 memory error LED @ 0x3C
> + */
> +};
> +
> +&i2c1 {
> + /* Directly connected to PCH SMBUS #0 */
> + status = "okay";
> +};
> +
> +&i2c2 {
> + status = "okay";
> +
> + /* BMC EEPROM, incl. mainboard FRU */
> + eeprom@50 {
> + compatible = "atmel,24c256";
> + reg = <0x50>;
> + };
> +
> + /* Also connected to:
> + * - fan header
> + * - mini-SAS HD connector
> + * - SSATA SGPIO
> + * - via switch (BMC_SMB3_PCH_IE_SML3_EN, active low) to PCH SMBUS #3
> + */
> +};
> +
> +&i2c3 {
> + status = "okay";
> +
> + /* PSU1 FRU @ 0xA0 */
> + eeprom@50 {
> + compatible = "atmel,24c02";
> + reg = <0x50>;
> + };
> +
> + /* PSU2 FRU @ 0xA2 */
> + eeprom@51 {
> + compatible = "atmel,24c02";
> + reg = <0x51>;
> + };
> +
> + /* PSU1 @ 0xB0 */
> + power-supply@58 {
> + compatible = "pmbus";
> + reg = <0x58>;
> + };
> +
> + /* PSU2 @ 0xB2 */
> + power-supply@59 {
> + compatible = "pmbus";
> + reg = <0x59>;
> + };
> +
> + /* Also connected to:
> + * - PCH SMBUS #1
> + */
> +};
> +
> +&i2c4 {
> + status = "okay";
> +
> + /* Connected to:
> + * - PCH SMBUS #2
> + */
> +
> + /* Connected via switch to:
> + * - CPU #0 channels ABC VDDQ @ 0x80
> + * - CPU #0 channels DEF VDDQ @ 0x81
> + * - CPU #1 channels ABC VDDQ @ 0x82
> + * - CPU #1 channels DEF VDDQ @ 0x83
> + * - CPU #0 VCCIO & VMCP @ 0x52
> + * - CPU #1 VCCIO & VMCP @ 0x53
> + * - CPU #0 VCCIN @ 0xC0
> + * - CPU #0 VSA @ 0xC2
> + * - CPU #1 VCCIN @ 0xC4
> + * - CPU #1 VSA @ 0xC6
> + * - J110
> + */
> +};
> +
> +&i2c5 {
> + status = "okay";
> +
> + /* Connected via switch (PCH_BMC_SMB_SW_P) to:
> + * - mainboard FRU @ 0xAE
> + * - XDP connector
> + * - ME debug header
> + * - clock buffer @ 0xD8
> + * - i2c4 via switch (PCH_VR_SMBUS_SW_P; controlled by PCH)
> + * - PCH SMBUS
> + */
> +};
> +
> +&i2c6 {
> + status = "okay";
> +
> + /* Connected via switch (BMC_PE_SMB_EN_1_N) to
> + * bus mux (selector BMC_PE_SMB_SW_BIT[1..0]) to:
> + * - 0,0: PCIE slot 1, SMB #1
> + * - 0,1: PCIE slot 1, SMB #2
> + * - 1,0: PCIE slot 2, SMB #1
> + * - 1,1: PCIE slot 2, SMB #2
> + */
> +
> + /* Connected via switch (BMC_PE_SMB_EN_2_N) to
> + * bus mux (selector BMC_PE_SMB_SW_BIT[1..0]) to:
> + * - 0,0: OCP0 (A) SMB
> + * - 0,1: OCP0 (C) SMB
> + * - 1,0: OCP1 (A) SMB
> + * - 1,1: NC
> + */
> +};
> +
> +&i2c7 {
> + status = "okay";
> +
> + /* Connected to:
> + * - PCH SMBUS #4
> + */
> +};
> +
> +&i2c8 {
> + status = "okay";
> +
> + /* Not connected */
> +};
> +
> +&mac0 {
> + status = "okay";
> +
> + use-ncsi;
> + no-hw-checksum;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rmii1_default>;
> +};
> +
> +&mac1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
> +};
> +
> +&ibt {
> + status = "okay";
> +};
> +
> +&kcs1 {
> + status = "okay";
> + kcs_addr = <0xca8>;
> +};
> +
> +&kcs3 {
> + status = "okay";
> + kcs_addr = <0xca2>;
> +};
> +
> +&gfx {
> + status = "okay";
> + memory-region = <&gfx_memory>;
> +};
> +
> +&gpio {
> + status = "okay";
> + gpio-line-names =
> + /*A0-A7*/ "","","IDLED_N","","","","","",
> + /*B0-B7*/ "","","","","","","","",
> + /*C0-C7*/ "","","","","ID_BUTTON","POST_COMPLETE","","",
> + /*D0-D7*/ "","","PS_PWROK","PLTRST_N","","","","",
> + /*E0-E7*/ "POWER_BUTTON","POWER_OUT","RESET_BUTTON","RESET_OUT",
> + "NMI_BUTTON","NMI_OUT","","HEARTBEAT_LED_N",
> + /*F0-F7*/ "","CLEAR_CMOS_N","","","IPMI_ALERT_LED_N","","","",
> + /*G0-G7*/ "BMC_PE_SMB_EN_1_N","BMC_PE_SMB_EN_2_N","","","","","","",
> + /*H0-H7*/ "","","","","","","","",
> + /*I0-I7*/ "","","","","","","","",
> + /*J0-J7*/ "","","","","","","","",
> + /*K0-K7*/ "","","","","","","","",
> + /*L0-L7*/ "","","","","","","","",
> + /*M0-M7*/ "","","","","","","","",
> + /*N0-N7*/ "","","","","","","","",
> + /*O0-O7*/ "","","","","","","","",
> + /*P0-P7*/ "","","","","","","","",
> + /*Q0-Q7*/ "","","","","BMC_PE_SMB_SW_BIT0","BMC_PE_SMB_SW_BIT1","","",
> + /*R0-R7*/ "","","","","","","","",
> + /*S0-S7*/ "","","","","","","","",
> + /*T0-T7*/ "","","","","","","","",
> + /*U0-U7*/ "","","","","","","","",
> + /*V0-V7*/ "","","","","","","","",
> + /*W0-W7*/ "","","","","","","","",
> + /*X0-X7*/ "","","","","","","","",
> + /*Y0-Y7*/ "","","","","","","","",
> + /*Z0-Z7*/ "","","","","","","","",
> + /*AA0-AA7*/ "","","","BMC_SMB3_PCH_IE_SML3_EN","","","","",
> + /*AB0-AB7*/ "","","","","","","","";
> +};
> --
> 2.33.0.309.g3052b89438-goog
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH linux dev-5.10] ARM: dts: aspeed: Add TYAN S7106 BMC machine
2021-09-07 20:52 [PATCH linux dev-5.10] ARM: dts: aspeed: Add TYAN S7106 BMC machine Oskar Senft
2021-09-07 23:44 ` Oskar Senft
@ 2021-09-08 1:14 ` Jeremy Kerr
1 sibling, 0 replies; 3+ messages in thread
From: Jeremy Kerr @ 2021-09-08 1:14 UTC (permalink / raw)
To: Oskar Senft, openbmc, joel; +Cc: Ed Tanous, Vijay Khemka, Jason Hargis
Hi Oskar,
> The TYAN S7106 is a server platform with an ASPEED AST2500 BMC.
>
> Submitted to upstream in
> https://lists.ozlabs.org/pipermail/linux-aspeed/2021-
> September/006326.html
Pending Joel's comments there, all looks good to me.
In case it's useful to include, I also have the multiplexer on i2c6
defined in my dts:
+ i2cmux {
+ compatible = "i2c-mux-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-parent = <&i2c6>;
+ mux-gpios = <&gpio ASPEED_GPIO(Q,4) GPIO_ACTIVE_HIGH
+ &gpio ASPEED_GPIO(Q,5) GPIO_ACTIVE_HIGH
+ &gpio ASPEED_GPIO(G,0) GPIO_ACTIVE_LOW
+ &gpio ASPEED_GPIO(G,1) GPIO_ACTIVE_LOW>;
+
+ i2c_pcie_s1b1: i2c@4 {
+ reg = <0x4>;
+ };
+ i2c_pcie_s1b2: i2c@5 {
+ reg = <0x5>;
+ };
+ i2c_pcie_s2b1: i2c@6 {
+ reg = <0x6>;
+ };
+ i2c_pcie_s2b2: i2c@7 {
+ reg = <0x7>;
+ };
+
+ i2c_ocp0a: i2c@8 {
+ reg = <0x8>;
+ };
+ i2c_ocp0c: i2c@9 {
+ reg = <0x9>;
+ };
+ i2c_ocp1a: i2c@a {
+ reg = <0xa>;
+ };
+ };
- but I've only done light testing on that.
Regardless, if you CC me on v2, I'd be happy to add my ack.
Cheers,
Jeremy
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-09-08 1:15 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-07 20:52 [PATCH linux dev-5.10] ARM: dts: aspeed: Add TYAN S7106 BMC machine Oskar Senft
2021-09-07 23:44 ` Oskar Senft
2021-09-08 1:14 ` Jeremy Kerr
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.