* [Buildroot] new perl build issue @ 2012-11-04 17:02 Alexander Khryukin 2012-11-04 17:53 ` Thomas Petazzoni 2012-11-04 19:41 ` François Perrad 0 siblings, 2 replies; 13+ messages in thread From: Alexander Khryukin @ 2012-11-04 17:02 UTC (permalink / raw) To: buildroot Hi. I'm trying to build new perl package and get error http://pastie.org/5181814 FATAL: kernel too old The program compiled OK, but exited with status 1. You have a problem. Shall I abort Configure [y] Ok. Stopping Configure. Looks like perl package get kernel version string via uname or /proc 2.6.32-279.9.1.el6.x86_64 my kernel -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20121104/820319b0/attachment.html> ^ permalink raw reply [flat|nested] 13+ messages in thread
* [Buildroot] new perl build issue 2012-11-04 17:02 [Buildroot] new perl build issue Alexander Khryukin @ 2012-11-04 17:53 ` Thomas Petazzoni 2012-11-04 18:24 ` Bernd Kuhls 2012-11-04 19:41 ` François Perrad 1 sibling, 1 reply; 13+ messages in thread From: Thomas Petazzoni @ 2012-11-04 17:53 UTC (permalink / raw) To: buildroot Dear Alexander Khryukin, Thanks for your report. Fran?ois, would you mind looking into this? Thanks! Thomas On Sun, 4 Nov 2012 20:02:22 +0300, Alexander Khryukin wrote: > Hi. > I'm trying to build new perl package > and get error > http://pastie.org/5181814 > > > FATAL: kernel too old > The program compiled OK, but exited with status 1. > You have a problem. Shall I abort Configure [y] > Ok. Stopping Configure. > > Looks like perl package get kernel version string via uname or /proc > 2.6.32-279.9.1.el6.x86_64 my kernel -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com ^ permalink raw reply [flat|nested] 13+ messages in thread
* [Buildroot] new perl build issue 2012-11-04 17:53 ` Thomas Petazzoni @ 2012-11-04 18:24 ` Bernd Kuhls 0 siblings, 0 replies; 13+ messages in thread From: Bernd Kuhls @ 2012-11-04 18:24 UTC (permalink / raw) To: buildroot Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8 @public.gmane.org> wrote in news:20121104185301.0616b2f9 at skate: > Fran??ois, would you mind looking into this? Hi, @Francois: Could you also please have a look at my report? http://article.gmane.org/gmane.comp.lib.uclibc.buildroot/48229 I had some registration issues while sending the post via Gmane, so it arrived a day later than written, so maybe it went unnoticed. Kind regards, Bernd ^ permalink raw reply [flat|nested] 13+ messages in thread
* [Buildroot] new perl build issue 2012-11-04 17:02 [Buildroot] new perl build issue Alexander Khryukin 2012-11-04 17:53 ` Thomas Petazzoni @ 2012-11-04 19:41 ` François Perrad 2012-11-05 5:53 ` Bernd Kuhls 2012-11-05 6:53 ` Thomas Petazzoni 1 sibling, 2 replies; 13+ messages in thread From: François Perrad @ 2012-11-04 19:41 UTC (permalink / raw) To: buildroot 2012/11/4 Alexander Khryukin <alexander@mezon.ru>: > Hi. > I'm trying to build new perl package > and get error > http://pastie.org/5181814 > > > FATAL: kernel too old > The program compiled OK, but exited with status 1. > You have a problem. Shall I abort Configure [y] > Ok. Stopping Configure. > > Looks like perl package get kernel version string via uname or /proc > 2.6.32-279.9.1.el6.x86_64 my kernel > the message 'FATAL: kernel too old' seems to come from qemu. refering line number from http://pastie.org/5181814 a file 'try.c' containing line 74 & 75 is cross-compiled successfully into 'try' by the command line 79. the command line 80 fails to execute it with qemu. $ /home/fdkit/buildroot/output/build/perl-5.16.1/Cross/run-qemu-arm ./try 'Cross/run-qemu-arm' is a one line script which wraps 'qemu-arm'. this afternoon, Thomas has posted 3 patches for qemu (see http://patchwork.ozlabs.org/patch/197055/). Alexander, try to rebuild host-qemu with them. Fran?ois > _______________________________________________ > buildroot mailing list > buildroot at busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot ^ permalink raw reply [flat|nested] 13+ messages in thread
* [Buildroot] new perl build issue 2012-11-04 19:41 ` François Perrad @ 2012-11-05 5:53 ` Bernd Kuhls 2012-11-05 6:53 ` Thomas Petazzoni 1 sibling, 0 replies; 13+ messages in thread From: Bernd Kuhls @ 2012-11-05 5:53 UTC (permalink / raw) To: buildroot Fran?ois Perrad <francois.perrad@gadz.org> wrote in news:CAB0FRstkx1+Eg0WTv4eVJ+KPFX9RY2C8X4SaL0EDoBK0P642SQ at mail.gmail.com: > this afternoon, Thomas has posted 3 patches for qemu (see > http://patchwork.ozlabs.org/patch/197055/). Hi, I needed to add libglib2 to QEMU_DEPENDENCIES to get host-qemu compiled. Furthermore the patch did not fix my compile problem, the qemu still happens: qemu: Unsupported syscall: 240 Kind regards, Bernd ^ permalink raw reply [flat|nested] 13+ messages in thread
* [Buildroot] new perl build issue 2012-11-04 19:41 ` François Perrad 2012-11-05 5:53 ` Bernd Kuhls @ 2012-11-05 6:53 ` Thomas Petazzoni 2012-11-05 8:10 ` Alexander Khryukin 2012-11-05 14:24 ` François Perrad 1 sibling, 2 replies; 13+ messages in thread From: Thomas Petazzoni @ 2012-11-05 6:53 UTC (permalink / raw) To: buildroot On Sun, 4 Nov 2012 20:41:45 +0100, Fran?ois Perrad wrote: > this afternoon, Thomas has posted 3 patches for qemu (see > http://patchwork.ozlabs.org/patch/197055/). > Alexander, try to rebuild host-qemu with them. Unfortunately, none of those patches have a chance to fix Alexander's problem. My patches only fix missing dependencies. Also, could you have a look at http://autobuild.buildroot.org/ for perl build failures? It seems like Qemu doesn't start properly on some platforms, for some reason. Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com ^ permalink raw reply [flat|nested] 13+ messages in thread
* [Buildroot] new perl build issue 2012-11-05 6:53 ` Thomas Petazzoni @ 2012-11-05 8:10 ` Alexander Khryukin 2012-11-05 9:19 ` Alexander Khryukin 2012-11-05 14:24 ` François Perrad 1 sibling, 1 reply; 13+ messages in thread From: Alexander Khryukin @ 2012-11-05 8:10 UTC (permalink / raw) To: buildroot 2012/11/5 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> > > On Sun, 4 Nov 2012 20:41:45 +0100, Fran?ois Perrad wrote: > > > this afternoon, Thomas has posted 3 patches for qemu (see > > http://patchwork.ozlabs.org/patch/197055/). > > Alexander, try to rebuild host-qemu with them. > > Unfortunately, none of those patches have a chance to fix Alexander's > problem. My patches only fix missing dependencies. > > Also, could you have a look at http://autobuild.buildroot.org/ for perl > build failures? It seems like Qemu doesn't start properly on some > platforms, for some reason. > > Thomas > -- > Thomas Petazzoni, Free Electrons > Kernel, drivers, real-time and embedded Linux > development, consulting, training and support. > http://free-electrons.com > I applied your patch but looks it not helps me. http://pastie.org/5188031 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20121105/5b9893a8/attachment.html> ^ permalink raw reply [flat|nested] 13+ messages in thread
* [Buildroot] new perl build issue 2012-11-05 8:10 ` Alexander Khryukin @ 2012-11-05 9:19 ` Alexander Khryukin 2012-11-05 14:33 ` François Perrad 0 siblings, 1 reply; 13+ messages in thread From: Alexander Khryukin @ 2012-11-05 9:19 UTC (permalink / raw) To: buildroot 2012/11/5 Alexander Khryukin <alexander@mezon.ru> > > > 2012/11/5 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> > >> >> On Sun, 4 Nov 2012 20:41:45 +0100, Fran?ois Perrad wrote: >> >> > this afternoon, Thomas has posted 3 patches for qemu (see >> > http://patchwork.ozlabs.org/patch/197055/). >> > Alexander, try to rebuild host-qemu with them. >> >> Unfortunately, none of those patches have a chance to fix Alexander's >> problem. My patches only fix missing dependencies. >> >> Also, could you have a look at http://autobuild.buildroot.org/ for perl >> build failures? It seems like Qemu doesn't start properly on some >> platforms, for some reason. >> >> Thomas >> -- >> Thomas Petazzoni, Free Electrons >> Kernel, drivers, real-time and embedded Linux >> development, consulting, training and support. >> http://free-electrons.com >> > > > I applied your patch but looks it not helps me. > > http://pastie.org/5188031 > Also if i compile it by my default system gcc it's ok [fdkit at kvm-host UU]$ gcc try.c [fdkit at kvm-host UU]$ ls ./a.out ./a.out* [fdkit at kvm-host UU]$ ./a.out Ok -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20121105/6b672048/attachment.html> ^ permalink raw reply [flat|nested] 13+ messages in thread
* [Buildroot] new perl build issue 2012-11-05 9:19 ` Alexander Khryukin @ 2012-11-05 14:33 ` François Perrad 2012-11-06 20:51 ` Alexander Khryukin 0 siblings, 1 reply; 13+ messages in thread From: François Perrad @ 2012-11-05 14:33 UTC (permalink / raw) To: buildroot 2012/11/5 Alexander Khryukin <alexander@mezon.ru>: > > > 2012/11/5 Alexander Khryukin <alexander@mezon.ru> >> >> >> >> 2012/11/5 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> >>> >>> >>> On Sun, 4 Nov 2012 20:41:45 +0100, Fran?ois Perrad wrote: >>> >>> > this afternoon, Thomas has posted 3 patches for qemu (see >>> > http://patchwork.ozlabs.org/patch/197055/). >>> > Alexander, try to rebuild host-qemu with them. >>> >>> Unfortunately, none of those patches have a chance to fix Alexander's >>> problem. My patches only fix missing dependencies. >>> >>> Also, could you have a look at http://autobuild.buildroot.org/ for perl >>> build failures? It seems like Qemu doesn't start properly on some >>> platforms, for some reason. >>> >>> Thomas >>> -- >>> Thomas Petazzoni, Free Electrons >>> Kernel, drivers, real-time and embedded Linux >>> development, consulting, training and support. >>> http://free-electrons.com >> >> >> >> I applied your patch but looks it not helps me. >> >> http://pastie.org/5188031 > > > > Also if i compile it by my default system gcc it's ok > > > [fdkit at kvm-host UU]$ gcc try.c > [fdkit at kvm-host UU]$ ls ./a.out > ./a.out* > [fdkit at kvm-host UU]$ ./a.out > Ok > Alexander, the 'qemu-arm' built by Buildroot doesn't work properly. could you try this workaround ? 1) install a 'qemu-arm' with your distro package manager, $ apt-get install qemu-kvm-extras # or equivalent 2) apply this patch : --- a/package/perl/perl.mk +++ b/package/perl/perl.mk @@ -22,7 +22,7 @@ endif PERL_CONF_OPT = -des \ -Dusecrosscompile \ - -Dtargetrun=$(QEMU_USER) \ + -Dtargetrun=qemu-arm \ -Dqemulib=$(STAGING_DIR) \ -Dar="$(TARGET_AR)" \ -Dcc="$(TARGET_CC)" \ Fran?ois ^ permalink raw reply [flat|nested] 13+ messages in thread
* [Buildroot] new perl build issue 2012-11-05 14:33 ` François Perrad @ 2012-11-06 20:51 ` Alexander Khryukin 2012-11-07 9:53 ` Alexander Khryukin 0 siblings, 1 reply; 13+ messages in thread From: Alexander Khryukin @ 2012-11-06 20:51 UTC (permalink / raw) To: buildroot 2012/11/5 Fran?ois Perrad <francois.perrad@gadz.org> > 2012/11/5 Alexander Khryukin <alexander@mezon.ru>: > > > > > > 2012/11/5 Alexander Khryukin <alexander@mezon.ru> > >> > >> > >> > >> 2012/11/5 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> > >>> > >>> > >>> On Sun, 4 Nov 2012 20:41:45 +0100, Fran?ois Perrad wrote: > >>> > >>> > this afternoon, Thomas has posted 3 patches for qemu (see > >>> > http://patchwork.ozlabs.org/patch/197055/). > >>> > Alexander, try to rebuild host-qemu with them. > >>> > >>> Unfortunately, none of those patches have a chance to fix Alexander's > >>> problem. My patches only fix missing dependencies. > >>> > >>> Also, could you have a look at http://autobuild.buildroot.org/ for > perl > >>> build failures? It seems like Qemu doesn't start properly on some > >>> platforms, for some reason. > >>> > >>> Thomas > >>> -- > >>> Thomas Petazzoni, Free Electrons > >>> Kernel, drivers, real-time and embedded Linux > >>> development, consulting, training and support. > >>> http://free-electrons.com > >> > >> > >> > >> I applied your patch but looks it not helps me. > >> > >> http://pastie.org/5188031 > > > > > > > > Also if i compile it by my default system gcc it's ok > > > > > > [fdkit at kvm-host UU]$ gcc try.c > > [fdkit at kvm-host UU]$ ls ./a.out > > ./a.out* > > [fdkit at kvm-host UU]$ ./a.out > > Ok > > > > Alexander, > > the 'qemu-arm' built by Buildroot doesn't work properly. > could you try this workaround ? > 1) install a 'qemu-arm' with your distro package manager, > $ apt-get install qemu-kvm-extras # or equivalent > 2) apply this patch : > --- a/package/perl/perl.mk > +++ b/package/perl/perl.mk > @@ -22,7 +22,7 @@ endif > > PERL_CONF_OPT = -des \ > -Dusecrosscompile \ > - -Dtargetrun=$(QEMU_USER) \ > + -Dtargetrun=qemu-arm \ > -Dqemulib=$(STAGING_DIR) \ > -Dar="$(TARGET_AR)" \ > -Dcc="$(TARGET_CC)" \ > > Fran?ois > I migrated my build system to fresh linux installation with 3.5.1 kernel Linux localhost.localdomain 3.5.1-nrj-desktop-1mib #1 SMP PREEMPT Tue Aug 14 11:57:05 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux Applied your patch, and problem still here. http://pastie.org/5336882 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20121106/fa1dd9f9/attachment.html> ^ permalink raw reply [flat|nested] 13+ messages in thread
* [Buildroot] new perl build issue 2012-11-06 20:51 ` Alexander Khryukin @ 2012-11-07 9:53 ` Alexander Khryukin 2012-11-07 20:35 ` Dan Pattison 0 siblings, 1 reply; 13+ messages in thread From: Alexander Khryukin @ 2012-11-07 9:53 UTC (permalink / raw) To: buildroot 2012/11/7 Alexander Khryukin <alexander@mezon.ru> > > > 2012/11/5 Fran?ois Perrad <francois.perrad@gadz.org> > >> 2012/11/5 Alexander Khryukin <alexander@mezon.ru>: >> > >> > >> > 2012/11/5 Alexander Khryukin <alexander@mezon.ru> >> >> >> >> >> >> >> >> 2012/11/5 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> >> >>> >> >>> >> >>> On Sun, 4 Nov 2012 20:41:45 +0100, Fran?ois Perrad wrote: >> >>> >> >>> > this afternoon, Thomas has posted 3 patches for qemu (see >> >>> > http://patchwork.ozlabs.org/patch/197055/). >> >>> > Alexander, try to rebuild host-qemu with them. >> >>> >> >>> Unfortunately, none of those patches have a chance to fix Alexander's >> >>> problem. My patches only fix missing dependencies. >> >>> >> >>> Also, could you have a look at http://autobuild.buildroot.org/ for >> perl >> >>> build failures? It seems like Qemu doesn't start properly on some >> >>> platforms, for some reason. >> >>> >> >>> Thomas >> >>> -- >> >>> Thomas Petazzoni, Free Electrons >> >>> Kernel, drivers, real-time and embedded Linux >> >>> development, consulting, training and support. >> >>> http://free-electrons.com >> >> >> >> >> >> >> >> I applied your patch but looks it not helps me. >> >> >> >> http://pastie.org/5188031 >> > >> > >> > >> > Also if i compile it by my default system gcc it's ok >> > >> > >> > [fdkit at kvm-host UU]$ gcc try.c >> > [fdkit at kvm-host UU]$ ls ./a.out >> > ./a.out* >> > [fdkit at kvm-host UU]$ ./a.out >> > Ok >> > >> >> Alexander, >> >> the 'qemu-arm' built by Buildroot doesn't work properly. >> could you try this workaround ? >> 1) install a 'qemu-arm' with your distro package manager, >> $ apt-get install qemu-kvm-extras # or equivalent >> 2) apply this patch : >> --- a/package/perl/perl.mk >> +++ b/package/perl/perl.mk >> @@ -22,7 +22,7 @@ endif >> >> PERL_CONF_OPT = -des \ >> -Dusecrosscompile \ >> - -Dtargetrun=$(QEMU_USER) \ >> + -Dtargetrun=qemu-arm \ >> -Dqemulib=$(STAGING_DIR) \ >> -Dar="$(TARGET_AR)" \ >> -Dcc="$(TARGET_CC)" \ >> >> Fran?ois >> > > > I migrated my build system to fresh linux installation with 3.5.1 kernel > Linux localhost.localdomain 3.5.1-nrj-desktop-1mib #1 SMP PREEMPT Tue Aug > 14 11:57:05 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux > > Applied your patch, and problem still here. > > http://pastie.org/5336882 > > Bump! I don't know how to solve it. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20121107/531b60f2/attachment.html> ^ permalink raw reply [flat|nested] 13+ messages in thread
* [Buildroot] new perl build issue 2012-11-07 9:53 ` Alexander Khryukin @ 2012-11-07 20:35 ` Dan Pattison 0 siblings, 0 replies; 13+ messages in thread From: Dan Pattison @ 2012-11-07 20:35 UTC (permalink / raw) To: buildroot On 11/7/2012 1:53 AM, Alexander Khryukin wrote: > > > 2012/11/7 Alexander Khryukin <alexander@mezon.ru > <mailto:alexander@mezon.ru>> > > > > 2012/11/5 Fran?ois Perrad <francois.perrad@gadz.org > <mailto:francois.perrad@gadz.org>> > > 2012/11/5 Alexander Khryukin <alexander@mezon.ru > <mailto:alexander@mezon.ru>>: > > > > > > 2012/11/5 Alexander Khryukin <alexander@mezon.ru > <mailto:alexander@mezon.ru>> > >> > >> > >> > >> 2012/11/5 Thomas Petazzoni > <thomas.petazzoni@free-electrons.com > <mailto:thomas.petazzoni@free-electrons.com>> > >>> > >>> > >>> On Sun, 4 Nov 2012 20:41:45 +0100, Fran?ois Perrad wrote: > >>> > >>> > this afternoon, Thomas has posted 3 patches for qemu (see > >>> > http://patchwork.ozlabs.org/patch/197055/). > >>> > Alexander, try to rebuild host-qemu with them. > >>> > >>> Unfortunately, none of those patches have a chance to fix > Alexander's > >>> problem. My patches only fix missing dependencies. > >>> > >>> Also, could you have a look at > http://autobuild.buildroot.org/ for perl > >>> build failures? It seems like Qemu doesn't start properly > on some > >>> platforms, for some reason. > >>> > >>> Thomas > >>> -- > >>> Thomas Petazzoni, Free Electrons > >>> Kernel, drivers, real-time and embedded Linux > >>> development, consulting, training and support. > >>> http://free-electrons.com > >> > >> > >> > >> I applied your patch but looks it not helps me. > >> > >> http://pastie.org/5188031 > > > > > > > > Also if i compile it by my default system gcc it's ok > > > > > > [fdkit at kvm-host UU]$ gcc try.c > > [fdkit at kvm-host UU]$ ls ./a.out > > ./a.out* > > [fdkit at kvm-host UU]$ ./a.out > > Ok > > > > Alexander, > > the 'qemu-arm' built by Buildroot doesn't work properly. > could you try this workaround ? > 1) install a 'qemu-arm' with your distro package manager, > $ apt-get install qemu-kvm-extras # or equivalent > 2) apply this patch : > --- a/package/perl/perl.mk <http://perl.mk> > +++ b/package/perl/perl.mk <http://perl.mk> > @@ -22,7 +22,7 @@ endif > > PERL_CONF_OPT = -des \ > -Dusecrosscompile \ > - -Dtargetrun=$(QEMU_USER) \ > + -Dtargetrun=qemu-arm \ > -Dqemulib=$(STAGING_DIR) \ > -Dar="$(TARGET_AR)" \ > -Dcc="$(TARGET_CC)" \ > > Fran?ois > > > > I migrated my build system to fresh linux installation with 3.5.1 > kernel > Linux localhost.localdomain 3.5.1-nrj-desktop-1mib #1 SMP PREEMPT > Tue Aug 14 11:57:05 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux > > Applied your patch, and problem still here. > > http://pastie.org/5336882 > > > > > Bump! > I don't know how to solve it. > > > _______________________________________________ > buildroot mailing list > buildroot at busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot Hello, Like Bernd mentioned below. Using perlcross makes a successful build of perl. I tried this in buildroot for target arm (AT91SAM9G20) with success. Was able to run Hello World program and perl -V with no problem. The perlcross patch only works for perl-5.16.0 right now. I was thinking on adjusting it for perl-5.16.2. My .configure line is pasted below. I use old version of buildroot so you will need to edit the paths. I followed the instructions here: http://perlcross.berlios.de/ ./configure --target=arm-linux-uclibc \ --target-tools-prefix=/home/ethertek/rms200/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibcgnueabi- \ --prefix=/usr \ --sysroot=/home/ethertek/rms200/buildroot/build_arm/staging_dir/ <Hi, <maybe this can be of help:http://perlcross.berlios.de/ <Kind regards, Bernd Dan Pattison Ethertek Circuits -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20121107/0a901636/attachment-0001.html> ^ permalink raw reply [flat|nested] 13+ messages in thread
* [Buildroot] new perl build issue 2012-11-05 6:53 ` Thomas Petazzoni 2012-11-05 8:10 ` Alexander Khryukin @ 2012-11-05 14:24 ` François Perrad 1 sibling, 0 replies; 13+ messages in thread From: François Perrad @ 2012-11-05 14:24 UTC (permalink / raw) To: buildroot 2012/11/5 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>: > > On Sun, 4 Nov 2012 20:41:45 +0100, Fran?ois Perrad wrote: > >> this afternoon, Thomas has posted 3 patches for qemu (see >> http://patchwork.ozlabs.org/patch/197055/). >> Alexander, try to rebuild host-qemu with them. > > Unfortunately, none of those patches have a chance to fix Alexander's > problem. My patches only fix missing dependencies. > > Also, could you have a look at http://autobuild.buildroot.org/ for perl > build failures? It seems like Qemu doesn't start properly on some > platforms, for some reason. on autobuilder, at the first time to run Qemu, there is the same error : > I've tried to compile and run the following simple program: > > #include <stdio.h> > int main() { printf("Ok\n"); return(0); } > > I used the command: > > /home/peko/scratch/host/usr/bin/powerpc-linux-gcc -o try ... try.c ... -lc > /home/peko/scratch/build/perl-5.16.1/Cross/run-qemu-ppc ./try > > and I got the following output: > > Unable to reserve 0xf7000000 bytes of virtual address space for use > as guest address space (check your virtual memory ulimit setting > or reserve less using -R option) > The program compiled OK, but exited with status 1. > You have a problem. Shall I abort Configure [y] Qemu wants ~4GB of RAM for starting, it is really huge. Fran?ois > > Thomas > -- > Thomas Petazzoni, Free Electrons > Kernel, drivers, real-time and embedded Linux > development, consulting, training and support. > http://free-electrons.com ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2012-11-07 20:35 UTC | newest] Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2012-11-04 17:02 [Buildroot] new perl build issue Alexander Khryukin 2012-11-04 17:53 ` Thomas Petazzoni 2012-11-04 18:24 ` Bernd Kuhls 2012-11-04 19:41 ` François Perrad 2012-11-05 5:53 ` Bernd Kuhls 2012-11-05 6:53 ` Thomas Petazzoni 2012-11-05 8:10 ` Alexander Khryukin 2012-11-05 9:19 ` Alexander Khryukin 2012-11-05 14:33 ` François Perrad 2012-11-06 20:51 ` Alexander Khryukin 2012-11-07 9:53 ` Alexander Khryukin 2012-11-07 20:35 ` Dan Pattison 2012-11-05 14:24 ` François Perrad
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.