From: Javier Martinez Canillas <javier@dowhile0.org> To: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Tony Lindgren <tony@atomide.com>, "linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>, "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org> Subject: Re: OMAP display kconfig options changing Date: Tue, 29 Dec 2015 09:13:57 -0300 [thread overview] Message-ID: <CABxcv=n7kgHEq7yrAet2AZuQ15dzvcRMA3o-dE8r2ywdB_=+=w@mail.gmail.com> (raw) In-Reply-To: <56825F3E.5070602@ti.com> Hello Tomi, On Tue, Dec 29, 2015 at 7:23 AM, Tomi Valkeinen <tomi.valkeinen@ti.com> wrote: > Hi Javier, Tony, > > On 22/12/15 23:18, Javier Martinez Canillas wrote: > >>> But if the userspace is using any omapfb specific apps, then yes, update >>> is necessary. >>> >> >> Yes but these people should have a migration plan anyways since omapfb >> (and fbdev in general) is going away right? > > Well, I would guess most people don't know/care about that. > Fair enough. >>> Ok. I think it's then best that I just update the defconfig to enable >>> omapfb as modules, as it is currently. >>> >> >> In that case I think you should squash the defconfig changes with >> commit ("70ba4e05531f omapfb/displays: change CONFIG_DISPLAY_* to >> CONFIG_FB_OMAP2_*") to maintain bisectability. > > Here's the diff to change the defconfig to enable the same items as before: > > diff --git a/arch/arm/configs/omap2plus_defconfig > b/arch/arm/configs/omap2plus_defconfig > index c5e1943e5427..b9581f1f0536 100644 > --- a/arch/arm/configs/omap2plus_defconfig > +++ b/arch/arm/configs/omap2plus_defconfig > @@ -290,24 +290,23 @@ CONFIG_FB=y > CONFIG_FIRMWARE_EDID=y > CONFIG_FB_MODE_HELPERS=y > CONFIG_FB_TILEBLITTING=y > -CONFIG_OMAP2_DSS=m > -CONFIG_OMAP5_DSS_HDMI=y > -CONFIG_OMAP2_DSS_SDI=y > -CONFIG_OMAP2_DSS_DSI=y > +CONFIG_FB_OMAP5_DSS_HDMI=y > +CONFIG_FB_OMAP2_DSS_SDI=y > +CONFIG_FB_OMAP2_DSS_DSI=y > CONFIG_FB_OMAP2=m > -CONFIG_DISPLAY_ENCODER_TFP410=m > -CONFIG_DISPLAY_ENCODER_TPD12S015=m > -CONFIG_DISPLAY_CONNECTOR_DVI=m > -CONFIG_DISPLAY_CONNECTOR_HDMI=m > -CONFIG_DISPLAY_CONNECTOR_ANALOG_TV=m > -CONFIG_DISPLAY_PANEL_DPI=m > -CONFIG_DISPLAY_PANEL_DSI_CM=m > -CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=m > -CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02=m > -CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01=m > -CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1=m > -CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1=m > -CONFIG_DISPLAY_PANEL_NEC_NL8048HL11=m > +CONFIG_FB_OMAP2_ENCODER_TFP410=m > +CONFIG_FB_OMAP2_ENCODER_TPD12S015=m > +CONFIG_FB_OMAP2_CONNECTOR_DVI=m > +CONFIG_FB_OMAP2_CONNECTOR_HDMI=m > +CONFIG_FB_OMAP2_CONNECTOR_ANALOG_TV=m > +CONFIG_FB_OMAP2_PANEL_DPI=m > +CONFIG_FB_OMAP2_PANEL_DSI_CM=m > +CONFIG_FB_OMAP2_PANEL_SONY_ACX565AKM=m > +CONFIG_FB_OMAP2_PANEL_LGPHILIPS_LB035Q02=m > +CONFIG_FB_OMAP2_PANEL_SHARP_LS037V7DW01=m > +CONFIG_FB_OMAP2_PANEL_TPO_TD028TTEC1=m > +CONFIG_FB_OMAP2_PANEL_TPO_TD043MTEA1=m > +CONFIG_FB_OMAP2_PANEL_NEC_NL8048HL11=m > CONFIG_BACKLIGHT_LCD_SUPPORT=y > CONFIG_LCD_CLASS_DEVICE=y > CONFIG_LCD_PLATFORM=y > Cool, that's what I changed to test omapfb as well. I can't test your diff right now but looks correct to me. Best regards, Javier
WARNING: multiple messages have this Message-ID (diff)
From: javier@dowhile0.org (Javier Martinez Canillas) To: linux-arm-kernel@lists.infradead.org Subject: OMAP display kconfig options changing Date: Tue, 29 Dec 2015 09:13:57 -0300 [thread overview] Message-ID: <CABxcv=n7kgHEq7yrAet2AZuQ15dzvcRMA3o-dE8r2ywdB_=+=w@mail.gmail.com> (raw) In-Reply-To: <56825F3E.5070602@ti.com> Hello Tomi, On Tue, Dec 29, 2015 at 7:23 AM, Tomi Valkeinen <tomi.valkeinen@ti.com> wrote: > Hi Javier, Tony, > > On 22/12/15 23:18, Javier Martinez Canillas wrote: > >>> But if the userspace is using any omapfb specific apps, then yes, update >>> is necessary. >>> >> >> Yes but these people should have a migration plan anyways since omapfb >> (and fbdev in general) is going away right? > > Well, I would guess most people don't know/care about that. > Fair enough. >>> Ok. I think it's then best that I just update the defconfig to enable >>> omapfb as modules, as it is currently. >>> >> >> In that case I think you should squash the defconfig changes with >> commit ("70ba4e05531f omapfb/displays: change CONFIG_DISPLAY_* to >> CONFIG_FB_OMAP2_*") to maintain bisectability. > > Here's the diff to change the defconfig to enable the same items as before: > > diff --git a/arch/arm/configs/omap2plus_defconfig > b/arch/arm/configs/omap2plus_defconfig > index c5e1943e5427..b9581f1f0536 100644 > --- a/arch/arm/configs/omap2plus_defconfig > +++ b/arch/arm/configs/omap2plus_defconfig > @@ -290,24 +290,23 @@ CONFIG_FB=y > CONFIG_FIRMWARE_EDID=y > CONFIG_FB_MODE_HELPERS=y > CONFIG_FB_TILEBLITTING=y > -CONFIG_OMAP2_DSS=m > -CONFIG_OMAP5_DSS_HDMI=y > -CONFIG_OMAP2_DSS_SDI=y > -CONFIG_OMAP2_DSS_DSI=y > +CONFIG_FB_OMAP5_DSS_HDMI=y > +CONFIG_FB_OMAP2_DSS_SDI=y > +CONFIG_FB_OMAP2_DSS_DSI=y > CONFIG_FB_OMAP2=m > -CONFIG_DISPLAY_ENCODER_TFP410=m > -CONFIG_DISPLAY_ENCODER_TPD12S015=m > -CONFIG_DISPLAY_CONNECTOR_DVI=m > -CONFIG_DISPLAY_CONNECTOR_HDMI=m > -CONFIG_DISPLAY_CONNECTOR_ANALOG_TV=m > -CONFIG_DISPLAY_PANEL_DPI=m > -CONFIG_DISPLAY_PANEL_DSI_CM=m > -CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=m > -CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02=m > -CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01=m > -CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1=m > -CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1=m > -CONFIG_DISPLAY_PANEL_NEC_NL8048HL11=m > +CONFIG_FB_OMAP2_ENCODER_TFP410=m > +CONFIG_FB_OMAP2_ENCODER_TPD12S015=m > +CONFIG_FB_OMAP2_CONNECTOR_DVI=m > +CONFIG_FB_OMAP2_CONNECTOR_HDMI=m > +CONFIG_FB_OMAP2_CONNECTOR_ANALOG_TV=m > +CONFIG_FB_OMAP2_PANEL_DPI=m > +CONFIG_FB_OMAP2_PANEL_DSI_CM=m > +CONFIG_FB_OMAP2_PANEL_SONY_ACX565AKM=m > +CONFIG_FB_OMAP2_PANEL_LGPHILIPS_LB035Q02=m > +CONFIG_FB_OMAP2_PANEL_SHARP_LS037V7DW01=m > +CONFIG_FB_OMAP2_PANEL_TPO_TD028TTEC1=m > +CONFIG_FB_OMAP2_PANEL_TPO_TD043MTEA1=m > +CONFIG_FB_OMAP2_PANEL_NEC_NL8048HL11=m > CONFIG_BACKLIGHT_LCD_SUPPORT=y > CONFIG_LCD_CLASS_DEVICE=y > CONFIG_LCD_PLATFORM=y > Cool, that's what I changed to test omapfb as well. I can't test your diff right now but looks correct to me. Best regards, Javier
next prev parent reply other threads:[~2015-12-29 12:13 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-12-18 8:55 OMAP display kconfig options changing Tomi Valkeinen 2015-12-18 8:55 ` Tomi Valkeinen 2015-12-18 13:53 ` Tony Lindgren 2015-12-18 13:53 ` Tony Lindgren 2015-12-18 14:03 ` Adam Ford 2015-12-18 14:03 ` Adam Ford 2015-12-18 15:04 ` Tomi Valkeinen 2015-12-18 15:04 ` Tomi Valkeinen 2015-12-18 15:00 ` Tomi Valkeinen 2015-12-18 15:00 ` Tomi Valkeinen 2015-12-18 16:05 ` Tony Lindgren 2015-12-18 16:05 ` Tony Lindgren 2015-12-18 16:14 ` Tomi Valkeinen 2015-12-18 16:14 ` Tomi Valkeinen 2015-12-22 21:18 ` Javier Martinez Canillas 2015-12-22 21:18 ` Javier Martinez Canillas 2015-12-29 10:23 ` Tomi Valkeinen 2015-12-29 10:23 ` Tomi Valkeinen 2015-12-29 12:13 ` Javier Martinez Canillas [this message] 2015-12-29 12:13 ` Javier Martinez Canillas 2016-01-21 21:51 ` Tony Lindgren 2016-01-21 21:51 ` Tony Lindgren
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to='CABxcv=n7kgHEq7yrAet2AZuQ15dzvcRMA3o-dE8r2ywdB_=+=w@mail.gmail.com' \ --to=javier@dowhile0.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-omap@vger.kernel.org \ --cc=tomi.valkeinen@ti.com \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.