Have to delete "/var/lib/bluetooth" folder in order to get all service characteristics available

* Have to delete "/var/lib/bluetooth" folder in order to get all service characteristics available
@ 2021-03-17  7:36 Kenny Bian
  2021-03-17 18:15 ` Luiz Augusto von Dentz
  0 siblings, 1 reply; 5+ messages in thread
From: Kenny Bian @ 2021-03-17  7:36 UTC (permalink / raw)
  To: linux-bluetooth

In order to keep the pairing information, we carry over the
"/var/lib/bluetooth" folder from an older build to the new build in
the Linux system when doing firmware upgrade. This way, our end user
doesn't have to choose "Forget This Device" each time after the
firmware upgrade. Otherwise, our end user has to "Forget This Device"
and re-pair because the pairing info can't be found in the Linux
device. We also set the GATT cache as "no" in
"/etc/bluetooth/main.conf". Then the mobile app won't crash when there
is any "service changed" such as adding notification to some existing
characteristics.

We organize our characteristics under the services. There are 10
services on the Linux device. Each service has 5 to 10
characteristics. However, we found a new problem recently. The problem
is: the first 8 services are fine. But the last one or two services
only have the service UUID listed in nRF or our mobile app. There are
no characteristics showing up under these one or two services. This
caused our mobile app can't read the characteristics data under these
problematic services. I checked the nRF. It's the same thing. nRF only
shows the last one or two services with the service UUIDs. There are
no characteristics listed under those 2 services.

In order to fix this issue, we have to do these(let's call it "The Steps"):
- Remove the "/var/lib/bluetooth" folder from the Linux system
- Restart our BlueZ based service in Python in the Linux system
- Choose "Forget This Device" on the iPhone. After this operation, the
"/var/lib/bluetooth" is generated in the Linux device.
- Connect to the device from our mobile app or from nRF. We can see
all of the 10 services in the list. Each characteristic under the
service can be seen.
- We are able to read the data by using our mobile app or by using nRF

I compared the files in the "/var/lib/bluetooth" folder. As we
disabled the GATT cache, there is no "cache" folder. There are only 2
files in the folder. Here is the folder structure:
/var/lib/bluetooth:
    |
    +----00:11:22:33:44:55/
        |
        +----6C:92:11:87:11:25/
            |
            +----attributes
            +----info

I kept one copy of the files after the firmware upgrade. I also kept a
copy of the files after the folder was re-generated. I compared the
file "attributes" and "info". For the attributes, they are the same.
For the "info" file, there are only 3 differences:
[General]
Name=PhoneX
. . .

[SlaveLongTermKey]
Key=252256E19E26F3ED9FD0B99B7B5B0193
. . .

[LinkKey]
Key=1B593296571E2C48CF6952E60395E304
. . .

I don't think these differences could cause the issue. But the fact
is, if I delete the "/var/lib/bluetooth" folder and go thru "The
Steps" above, the problem will be gone. All of the services will have
their characteristics showing up in nRF. The data can be read from the
characteristics. This means the folder "/var/lib/bluetooth" is related
to the issue. But I don't know why.

Here is also another thing. I subscribed to the "PropertiesChanged"
signal. In the callback function "properties_changed", I print out the
"changed". Here is the code to subscribe the "PropertiesChanged":

        bus.add_signal_receiver(
            properties_changed,
            dbus_interface="org.freedesktop.DBus.Properties",
            signal_name="PropertiesChanged",
            arg0="org.bluez.Device1",
            path_keyword="path",
        )

If the folder "/var/lib/bluetooth" is removed and go thru "The Steps",
I saw the log like this:
dbus.Dictionary({dbus.String('UUIDs'):
dbus.Array([dbus.String('00000000-deca-fade-deca-deafdecacafe'),
dbus.String('00001000-0000-1000-8000-00805f9b34fb'),
dbus.String('0000110a-0000-1000-8000-00805f9b34fb'),
dbus.String('0000110c-0000-1000-8000-00805f9b34fb'),
dbus.String('0000110e-0000-1000-8000-00805f9b34fb'),
dbus.String('00001116-0000-1000-8000-00805f9b34fb'),
dbus.String('0000111f-0000-1000-8000-00805f9b34fb'),
dbus.String('0000112f-0000-1000-8000-00805f9b34fb'),
dbus.String('00001132-0000-1000-8000-00805f9b34fb'),
dbus.String('00001200-0000-1000-8000-00805f9b34fb'),
dbus.String('00001800-0000-1000-8000-00805f9b34fb'),
dbus.String('00001801-0000-1000-8000-00805f9b34fb'),
dbus.String('00001805-0000-1000-8000-00805f9b34fb'),
dbus.String('0000180a-0000-1000-8000-00805f9b34fb'),
dbus.String('0000180f-0000-1000-8000-00805f9b34fb'),
dbus.String('02030302-1d19-415f-86f2-22a2106a0a77'),
dbus.String('7905f431-b5ce-4e99-a40f-4b1e122d00d0'),
dbus.String('89d3502b-0f36-433a-8ef4-c502ad55f8dc'),
dbus.String('9fa480e0-4967-4542-9390-d343dc5d04ae'),
dbus.String('d0611e78-bbb4-4591-a5f8-487910ae4366')],
signature=dbus.Signature('s'), variant_level=1),
dbus.String('ServicesResolved'): dbus.Boolean(True, variant_level=1)},
signature=dbus.Signature('sv'))

If I check the log after the firmware is upgraded without deleting the
"/var/lib/bluetooth" folder, the log looks like this:
dbus.Dictionary({dbus.String('ServicesResolved'): dbus.Boolean(True,
variant_level=1)}, signature=dbus.Signature('sv'))

As we can see, they are different. Is it something to do with D-Bus?

We understand that if we don't carry over the "/var/lib/bluetooth"
folder, then there is no this issue. But our end user will have to
choose "Forget This Device" each time after the firmware is upgraded.
Otherwise, the end user can't connect to the Linux device because the
pairing info can't be found. Is there a way to fix this issue? Namely,
is there a way to keep the pairing info and also avoid this issue?

Thanks in advance!

^ permalink raw reply	[flat|nested] 5+ messages in thread