* [U-Boot] (xilinx-u-boot query) Trying to run FALCON mode on zynq-microzed board.
@ 2014-06-04 13:24 Uzair Zaidi
2014-06-05 10:57 ` Michal Simek
0 siblings, 1 reply; 3+ messages in thread
From: Uzair Zaidi @ 2014-06-04 13:24 UTC (permalink / raw)
To: u-boot
I am trying to run u-boot falcon mode on zynq-microzed board and i am
following README-falcon. There are two methods with spl export i.e. ATAGS
blob and FDT blob.
I am using FDT in spl export.
Is the DT blob (fdt) needs to get
prepard/patched for this board (zynq-microzed)?
If yes, when i run "run mtdargs addip2 addtty" command as given in the
README-falcon, i get following error:-
## Error: "mtdargs" not defined
is there any other option instead of "run mtdargs addip2 addtty" command or
it is mandatory?
And also i am getting confused about "fdt boardsetup" command, which is not
working.
^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot] (xilinx-u-boot query) Trying to run FALCON mode on zynq-microzed board.
2014-06-04 13:24 [U-Boot] (xilinx-u-boot query) Trying to run FALCON mode on zynq-microzed board Uzair Zaidi
@ 2014-06-05 10:57 ` Michal Simek
2014-06-05 11:10 ` Uzair Zaidi
0 siblings, 1 reply; 3+ messages in thread
From: Michal Simek @ 2014-06-05 10:57 UTC (permalink / raw)
To: u-boot
Hi Uzair,
On 06/04/2014 03:24 PM, Uzair Zaidi wrote:
> I am trying to run u-boot falcon mode on zynq-microzed board and i am
> following README-falcon. There are two methods with spl export i.e. ATAGS
> blob and FDT blob.
> I am using FDT in spl export.
>
> Is the DT blob (fdt) needs to get
> prepard/patched for this board (zynq-microzed)?
>
> If yes, when i run "run mtdargs addip2 addtty" command as given in the
> README-falcon, i get following error:-
>
> ## Error: "mtdargs" not defined
>
> is there any other option instead of "run mtdargs addip2 addtty" command or
> it is mandatory?
>
> And also i am getting confused about "fdt boardsetup" command, which is not
> working.
I am not using these commands that's why I can't help you.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140605/2b59fa67/attachment.pgp>
^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot] (xilinx-u-boot query) Trying to run FALCON mode on zynq-microzed board.
2014-06-05 10:57 ` Michal Simek
@ 2014-06-05 11:10 ` Uzair Zaidi
0 siblings, 0 replies; 3+ messages in thread
From: Uzair Zaidi @ 2014-06-05 11:10 UTC (permalink / raw)
To: u-boot
hello Michal,
Thankyou for your reply.
If you wanted to Falcon, how would you do it?
Is there any alternative to those commands ? Are the commands really
important?
On Thu, Jun 5, 2014 at 4:27 PM, Michal Simek <monstr@monstr.eu> wrote:
> Hi Uzair,
>
> On 06/04/2014 03:24 PM, Uzair Zaidi wrote:
> > I am trying to run u-boot falcon mode on zynq-microzed board and i am
> > following README-falcon. There are two methods with spl export i.e. ATAGS
> > blob and FDT blob.
> > I am using FDT in spl export.
> >
> > Is the DT blob (fdt) needs to get
> > prepard/patched for this board (zynq-microzed)?
> >
> > If yes, when i run "run mtdargs addip2 addtty" command as given in the
> > README-falcon, i get following error:-
> >
> > ## Error: "mtdargs" not defined
> >
> > is there any other option instead of "run mtdargs addip2 addtty" command
> or
> > it is mandatory?
> >
> > And also i am getting confused about "fdt boardsetup" command, which is
> not
> > working.
>
> I am not using these commands that's why I can't help you.
>
> Thanks,
> Michal
>
> --
> Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
> w: www.monstr.eu p: +42-0-721842854
> Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
> Maintainer of Linux kernel - Xilinx Zynq ARM architecture
> Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
>
>
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-06-05 11:10 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-06-04 13:24 [U-Boot] (xilinx-u-boot query) Trying to run FALCON mode on zynq-microzed board Uzair Zaidi
2014-06-05 10:57 ` Michal Simek
2014-06-05 11:10 ` Uzair Zaidi
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.