All of lore.kernel.org
 help / color / mirror / Atom feed
* [U-Boot] Moschip ethernet adapter is not seen as ethernet device
@ 2012-11-18 12:16 valdez valdez
  2012-11-19 20:01 ` valdez valdez
  0 siblings, 1 reply; 3+ messages in thread
From: valdez valdez @ 2012-11-18 12:16 UTC (permalink / raw)
  To: u-boot

Hello,

I tried use my USB ETH adapter. Following README files I addes into
beagle.h file (my board is beagleboard) this:

#define CONFIG_USB_HOST_ETHER    /* Enable USB Ethernet adapters */
#define CONFIG_USB_ETHER_ASIX    /* Asix, or whatever driver(s) you want */

#define CONFIG_CMD_NET
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP

#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_BOOTPATH

and into asix.c file this:

{ 0x9710, 0x7830, FLAG_TYPE_AX88172},

I based on what my host Linux showed to me:

Vendor specific,  USB Revision 2.0
 - Moschip Semiconductor UA0025C               6e003e8f
 - Class: Vendor specific
 - PacketSize: 64  Configurations: 1
 - Vendor: 0x9710  Product 0x7830 Version 1.0
   Configuration: 1
   - Interfaces: 1 Bus Powered Remote Wakeup 500mA
     Interface: 0
     - Alternate Setting 0, Endpoints: 3
     - Class Vendor specific
     - Endpoint 1 In Bulk MaxPacket 512
     - Endpoint 2 Out Bulk MaxPacket 512
     - Endpoint 3 In Interrupt MaxPacket 16 Interval 1ms

But U-Boot don't see it as Ethernet Device, it only recognize it in tree:

(Re)start USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 0 Ethernet Device(s) found
OMAP3 beagleboard.org # usb tree
USB device tree:
  1  Hub (480 Mb/s, 0mA)
  |  u-boot EHCI Host Controller
  |
  +-2  Vendor specific (480 Mb/s, 500mA)
       Moschip Semiconductor UA0025C               6e003e8f


Could you help me with this, please?

^ permalink raw reply	[flat|nested] 3+ messages in thread
* [U-Boot] Moschip ethernet adapter is not seen as ethernet device
  2012-11-18 12:16 [U-Boot] Moschip ethernet adapter is not seen as ethernet device valdez valdez
@ 2012-11-19 20:01 ` valdez valdez
  0 siblings, 0 replies; 3+ messages in thread
From: valdez valdez @ 2012-11-19 20:01 UTC (permalink / raw)
  To: u-boot

Sorry for duplication previous post.

If this configuration doesn't work, could you instruct how to write a
driver for this dongle?

2012/11/18 valdez valdez <valdez151@gmail.com>:
> Hello,
>
> I tried use my USB ETH adapter. Following README files I addes into
> beagle.h file (my board is beagleboard) this:
>
> #define CONFIG_USB_HOST_ETHER    /* Enable USB Ethernet adapters */
> #define CONFIG_USB_ETHER_ASIX    /* Asix, or whatever driver(s) you want */
>
> #define CONFIG_CMD_NET
> #define CONFIG_CMD_PING
> #define CONFIG_CMD_DHCP
>
> #define CONFIG_BOOTP_SUBNETMASK
> #define CONFIG_BOOTP_GATEWAY
> #define CONFIG_BOOTP_HOSTNAME
> #define CONFIG_BOOTP_BOOTPATH
>
> and into asix.c file this:
>
> { 0x9710, 0x7830, FLAG_TYPE_AX88172},
>
> I based on what my host Linux showed to me:
>
> Vendor specific,  USB Revision 2.0
>  - Moschip Semiconductor UA0025C               6e003e8f
>  - Class: Vendor specific
>  - PacketSize: 64  Configurations: 1
>  - Vendor: 0x9710  Product 0x7830 Version 1.0
>    Configuration: 1
>    - Interfaces: 1 Bus Powered Remote Wakeup 500mA
>      Interface: 0
>      - Alternate Setting 0, Endpoints: 3
>      - Class Vendor specific
>      - Endpoint 1 In Bulk MaxPacket 512
>      - Endpoint 2 Out Bulk MaxPacket 512
>      - Endpoint 3 In Interrupt MaxPacket 16 Interval 1ms
>
> But U-Boot don't see it as Ethernet Device, it only recognize it in tree:
>
> (Re)start USB...
> USB0:   USB EHCI 1.00
> scanning bus 0 for devices... 2 USB Device(s) found
>        scanning usb for storage devices... 0 Storage Device(s) found
>        scanning usb for ethernet devices... 0 Ethernet Device(s) found
> OMAP3 beagleboard.org # usb tree
> USB device tree:
>   1  Hub (480 Mb/s, 0mA)
>   |  u-boot EHCI Host Controller
>   |
>   +-2  Vendor specific (480 Mb/s, 500mA)
>        Moschip Semiconductor UA0025C               6e003e8f
>
>
> Could you help me with this, please?

^ permalink raw reply	[flat|nested] 3+ messages in thread
* [U-Boot] Moschip ethernet adapter is not seen as ethernet device
@ 2012-11-17 22:09 valdez valdez
  0 siblings, 0 replies; 3+ messages in thread
From: valdez valdez @ 2012-11-17 22:09 UTC (permalink / raw)
  To: u-boot

Hello,

I tried use my USB ETH adapter. Following README files I addes into
beagle.h file (my board is beagleboard) this:

#define CONFIG_USB_HOST_ETHER    /* Enable USB Ethernet adapters */
#define CONFIG_USB_ETHER_ASIX    /* Asix, or whatever driver(s) you want */

#define CONFIG_CMD_NET
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP

#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_BOOTPATH

and into asix.c file this:

{ 0x9710, 0x7830, FLAG_TYPE_AX88172},

I based on what my host Linux showed to me:

Vendor specific,  USB Revision 2.0
 - Moschip Semiconductor UA0025C               6e003e8f
 - Class: Vendor specific
 - PacketSize: 64  Configurations: 1
 - Vendor: 0x9710  Product 0x7830 Version 1.0
   Configuration: 1
   - Interfaces: 1 Bus Powered Remote Wakeup 500mA
     Interface: 0
     - Alternate Setting 0, Endpoints: 3
     - Class Vendor specific
     - Endpoint 1 In Bulk MaxPacket 512
     - Endpoint 2 Out Bulk MaxPacket 512
     - Endpoint 3 In Interrupt MaxPacket 16 Interval 1ms

But U-Boot don't see it as Ethernet Device, it only recognize it in tree:

(Re)start USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 0 Ethernet Device(s) found
OMAP3 beagleboard.org # usb tree
USB device tree:
  1  Hub (480 Mb/s, 0mA)
  |  u-boot EHCI Host Controller
  |
  +-2  Vendor specific (480 Mb/s, 500mA)
       Moschip Semiconductor UA0025C               6e003e8f


Could you help me with this, please?

^ permalink raw reply	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-11-19 20:01 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-11-18 12:16 [U-Boot] Moschip ethernet adapter is not seen as ethernet device valdez valdez
2012-11-19 20:01 ` valdez valdez
  -- strict thread matches above, loose matches on Subject: below --
2012-11-17 22:09 valdez valdez

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.