* [GIT PULL] ARM: bmc: devicetree changes for 5.13, v2
@ 2021-04-16 3:27 ` Joel Stanley
0 siblings, 0 replies; 8+ messages in thread
From: Joel Stanley @ 2021-04-16 3:27 UTC (permalink / raw)
To: SoC Team; +Cc: linux-aspeed, Linux ARM, Andrew Jeffery
Hello Soc maintainers,
Here are some fixes for the changes that have already been merged for v5.13.
I also merged some changes that came in later. If you would prefer to
not take them then I can send a pull with just the fixes.
The following changes since commit f0145db24e65f6cf13347a90ffb86e5ef2ff2ca2:
ARM: dts: aspeed: tiogapass: add hotplug controller (2021-04-16
12:28:38 +0930)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc.git
tags/bmc-5.13-devicetree-2
for you to fetch changes up to f0145db24e65f6cf13347a90ffb86e5ef2ff2ca2:
ARM: dts: aspeed: tiogapass: add hotplug controller (2021-04-16
12:28:38 +0930)
----------------------------------------------------------------
BMC device tree updates for 5.13, round two
- Fixes to the first pull request for Rainier
- Small changes for Rainier, EthanolX and Tiogapass
----------------------------------------------------------------
Eddie James (4):
ARM: dts: aspeed: Rainier: Fix PCA9552 on bus 8
ARM: dts: aspeed: Rainier: Fix humidity sensor bus address
ARM: dts: aspeed: Rainier 1S4U: Fix fan nodes
ARM: dts: aspeed: Rainier: Update to pass 2 hardware
Konstantin Aladyshev (1):
ARM: dts: aspeed: amd-ethanolx: Enable all used I2C busses
Paul Fertser (1):
ARM: dts: aspeed: tiogapass: add hotplug controller
^ permalink raw reply [flat|nested] 8+ messages in thread
* [GIT PULL] ARM: bmc: devicetree changes for 5.13, v2
@ 2021-04-16 3:27 ` Joel Stanley
0 siblings, 0 replies; 8+ messages in thread
From: Joel Stanley @ 2021-04-16 3:27 UTC (permalink / raw)
To: SoC Team; +Cc: linux-aspeed, Linux ARM, Andrew Jeffery
Hello Soc maintainers,
Here are some fixes for the changes that have already been merged for v5.13.
I also merged some changes that came in later. If you would prefer to
not take them then I can send a pull with just the fixes.
The following changes since commit f0145db24e65f6cf13347a90ffb86e5ef2ff2ca2:
ARM: dts: aspeed: tiogapass: add hotplug controller (2021-04-16
12:28:38 +0930)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc.git
tags/bmc-5.13-devicetree-2
for you to fetch changes up to f0145db24e65f6cf13347a90ffb86e5ef2ff2ca2:
ARM: dts: aspeed: tiogapass: add hotplug controller (2021-04-16
12:28:38 +0930)
----------------------------------------------------------------
BMC device tree updates for 5.13, round two
- Fixes to the first pull request for Rainier
- Small changes for Rainier, EthanolX and Tiogapass
----------------------------------------------------------------
Eddie James (4):
ARM: dts: aspeed: Rainier: Fix PCA9552 on bus 8
ARM: dts: aspeed: Rainier: Fix humidity sensor bus address
ARM: dts: aspeed: Rainier 1S4U: Fix fan nodes
ARM: dts: aspeed: Rainier: Update to pass 2 hardware
Konstantin Aladyshev (1):
ARM: dts: aspeed: amd-ethanolx: Enable all used I2C busses
Paul Fertser (1):
ARM: dts: aspeed: tiogapass: add hotplug controller
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [GIT PULL] ARM: bmc: devicetree changes for 5.13, v2
@ 2021-04-19 14:44 ` Arnd Bergmann
0 siblings, 0 replies; 8+ messages in thread
From: Arnd Bergmann @ 2021-04-19 14:44 UTC (permalink / raw)
To: Joel Stanley; +Cc: SoC Team, linux-aspeed, Linux ARM, Andrew Jeffery
On Fri, Apr 16, 2021 at 5:27 AM Joel Stanley <joel@jms.id.au> wrote:
>
> Hello Soc maintainers,
>
> Here are some fixes for the changes that have already been merged for v5.13.
>
> I also merged some changes that came in later. If you would prefer to
> not take them then I can send a pull with just the fixes.
>
> The following changes since commit f0145db24e65f6cf13347a90ffb86e5ef2ff2ca2:
>
> for you to fetch changes up to f0145db24e65f6cf13347a90ffb86e5ef2ff2ca2:
Hi Joel,
something about this pull request doesn't add up, and 'b4' refuses
to pull it since the 'since commit f0145db2' and 'up to f0145db2'
references refer to the same commit.
I assume this is just a copy-paste error on your end, but it would
be nice if you could double-check and resend the pull request
based on the ee33e2fb3d70 commit that I merged.
Arnd
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [GIT PULL] ARM: bmc: devicetree changes for 5.13, v2
@ 2021-04-19 14:44 ` Arnd Bergmann
0 siblings, 0 replies; 8+ messages in thread
From: Arnd Bergmann @ 2021-04-19 14:44 UTC (permalink / raw)
To: Joel Stanley; +Cc: SoC Team, linux-aspeed, Linux ARM, Andrew Jeffery
On Fri, Apr 16, 2021 at 5:27 AM Joel Stanley <joel@jms.id.au> wrote:
>
> Hello Soc maintainers,
>
> Here are some fixes for the changes that have already been merged for v5.13.
>
> I also merged some changes that came in later. If you would prefer to
> not take them then I can send a pull with just the fixes.
>
> The following changes since commit f0145db24e65f6cf13347a90ffb86e5ef2ff2ca2:
>
> for you to fetch changes up to f0145db24e65f6cf13347a90ffb86e5ef2ff2ca2:
Hi Joel,
something about this pull request doesn't add up, and 'b4' refuses
to pull it since the 'since commit f0145db2' and 'up to f0145db2'
references refer to the same commit.
I assume this is just a copy-paste error on your end, but it would
be nice if you could double-check and resend the pull request
based on the ee33e2fb3d70 commit that I merged.
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [GIT PULL] ARM: bmc: devicetree changes for 5.13, v2
@ 2021-04-20 7:11 ` Joel Stanley
0 siblings, 0 replies; 8+ messages in thread
From: Joel Stanley @ 2021-04-20 7:11 UTC (permalink / raw)
To: Arnd Bergmann; +Cc: SoC Team, linux-aspeed, Linux ARM, Andrew Jeffery
On Mon, 19 Apr 2021 at 14:44, Arnd Bergmann <arnd@arndb.de> wrote:
>
> On Fri, Apr 16, 2021 at 5:27 AM Joel Stanley <joel@jms.id.au> wrote:
> >
> > Hello Soc maintainers,
> >
> > Here are some fixes for the changes that have already been merged for v5.13.
> >
> > I also merged some changes that came in later. If you would prefer to
> > not take them then I can send a pull with just the fixes.
> >
> > The following changes since commit f0145db24e65f6cf13347a90ffb86e5ef2ff2ca2:
> >
> > for you to fetch changes up to f0145db24e65f6cf13347a90ffb86e5ef2ff2ca2:
>
> Hi Joel,
>
> something about this pull request doesn't add up, and 'b4' refuses
> to pull it since the 'since commit f0145db2' and 'up to f0145db2'
> references refer to the same commit.
>
> I assume this is just a copy-paste error on your end, but it would
> be nice if you could double-check and resend the pull request
> based on the ee33e2fb3d70 commit that I merged.
Nice catch. It looks I've generated pull requests incorrectly from
v5.5 onwards, and this is the first time we've noticed. My bash
history shows I started generating them like this:
git request-pull tag url tag
v5.4 was the first time I'd sent a second PR for the same branch, so
when it came to generating the next one ctrl+R'd myself into the wrong
syntax and continued doing so ever since.
I'll try sending this one again now.
Cheers,
Joel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [GIT PULL] ARM: bmc: devicetree changes for 5.13, v2
@ 2021-04-20 7:11 ` Joel Stanley
0 siblings, 0 replies; 8+ messages in thread
From: Joel Stanley @ 2021-04-20 7:11 UTC (permalink / raw)
To: Arnd Bergmann; +Cc: SoC Team, linux-aspeed, Linux ARM, Andrew Jeffery
On Mon, 19 Apr 2021 at 14:44, Arnd Bergmann <arnd@arndb.de> wrote:
>
> On Fri, Apr 16, 2021 at 5:27 AM Joel Stanley <joel@jms.id.au> wrote:
> >
> > Hello Soc maintainers,
> >
> > Here are some fixes for the changes that have already been merged for v5.13.
> >
> > I also merged some changes that came in later. If you would prefer to
> > not take them then I can send a pull with just the fixes.
> >
> > The following changes since commit f0145db24e65f6cf13347a90ffb86e5ef2ff2ca2:
> >
> > for you to fetch changes up to f0145db24e65f6cf13347a90ffb86e5ef2ff2ca2:
>
> Hi Joel,
>
> something about this pull request doesn't add up, and 'b4' refuses
> to pull it since the 'since commit f0145db2' and 'up to f0145db2'
> references refer to the same commit.
>
> I assume this is just a copy-paste error on your end, but it would
> be nice if you could double-check and resend the pull request
> based on the ee33e2fb3d70 commit that I merged.
Nice catch. It looks I've generated pull requests incorrectly from
v5.5 onwards, and this is the first time we've noticed. My bash
history shows I started generating them like this:
git request-pull tag url tag
v5.4 was the first time I'd sent a second PR for the same branch, so
when it came to generating the next one ctrl+R'd myself into the wrong
syntax and continued doing so ever since.
I'll try sending this one again now.
Cheers,
Joel
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [GIT PULL] ARM: bmc: devicetree changes for 5.13, v2
@ 2021-04-20 10:18 ` Arnd Bergmann
0 siblings, 0 replies; 8+ messages in thread
From: Arnd Bergmann @ 2021-04-20 10:18 UTC (permalink / raw)
To: Joel Stanley; +Cc: SoC Team, linux-aspeed, Linux ARM, Andrew Jeffery
On Tue, Apr 20, 2021 at 9:11 AM Joel Stanley <joel@jms.id.au> wrote:
>
> On Mon, 19 Apr 2021 at 14:44, Arnd Bergmann <arnd@arndb.de> wrote:
> >
> > On Fri, Apr 16, 2021 at 5:27 AM Joel Stanley <joel@jms.id.au> wrote:
> > >
> > > Hello Soc maintainers,
> > >
> > > Here are some fixes for the changes that have already been merged for v5.13.
> > >
> > > I also merged some changes that came in later. If you would prefer to
> > > not take them then I can send a pull with just the fixes.
> > >
> > > The following changes since commit f0145db24e65f6cf13347a90ffb86e5ef2ff2ca2:
> > >
> > > for you to fetch changes up to f0145db24e65f6cf13347a90ffb86e5ef2ff2ca2:
> >
> > Hi Joel,
> >
> > something about this pull request doesn't add up, and 'b4' refuses
> > to pull it since the 'since commit f0145db2' and 'up to f0145db2'
> > references refer to the same commit.
> >
> > I assume this is just a copy-paste error on your end, but it would
> > be nice if you could double-check and resend the pull request
> > based on the ee33e2fb3d70 commit that I merged.
>
> Nice catch. It looks I've generated pull requests incorrectly from
> v5.5 onwards, and this is the first time we've noticed. My bash
> history shows I started generating them like this:
>
> git request-pull tag url tag
Ah right. I'm surprised this resulted in the correct shortlog
and diffstat, but that clearly explains it.
> I'll try sending this one again now.
I only started using b4 recently, so I wouldn't have caught it in the past,
as I wasn't paying close attention to the commit hashes. I usually
tried to ensure that the contents match up with the description, and
that worked fine. I've had sporadic problems in the past with b4 and
it's possible that I just papered over it with a manual merge thinking
that I did something wrong instead of b4 pointing out an actual
problem.
Arnd
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [GIT PULL] ARM: bmc: devicetree changes for 5.13, v2
@ 2021-04-20 10:18 ` Arnd Bergmann
0 siblings, 0 replies; 8+ messages in thread
From: Arnd Bergmann @ 2021-04-20 10:18 UTC (permalink / raw)
To: Joel Stanley; +Cc: SoC Team, linux-aspeed, Linux ARM, Andrew Jeffery
On Tue, Apr 20, 2021 at 9:11 AM Joel Stanley <joel@jms.id.au> wrote:
>
> On Mon, 19 Apr 2021 at 14:44, Arnd Bergmann <arnd@arndb.de> wrote:
> >
> > On Fri, Apr 16, 2021 at 5:27 AM Joel Stanley <joel@jms.id.au> wrote:
> > >
> > > Hello Soc maintainers,
> > >
> > > Here are some fixes for the changes that have already been merged for v5.13.
> > >
> > > I also merged some changes that came in later. If you would prefer to
> > > not take them then I can send a pull with just the fixes.
> > >
> > > The following changes since commit f0145db24e65f6cf13347a90ffb86e5ef2ff2ca2:
> > >
> > > for you to fetch changes up to f0145db24e65f6cf13347a90ffb86e5ef2ff2ca2:
> >
> > Hi Joel,
> >
> > something about this pull request doesn't add up, and 'b4' refuses
> > to pull it since the 'since commit f0145db2' and 'up to f0145db2'
> > references refer to the same commit.
> >
> > I assume this is just a copy-paste error on your end, but it would
> > be nice if you could double-check and resend the pull request
> > based on the ee33e2fb3d70 commit that I merged.
>
> Nice catch. It looks I've generated pull requests incorrectly from
> v5.5 onwards, and this is the first time we've noticed. My bash
> history shows I started generating them like this:
>
> git request-pull tag url tag
Ah right. I'm surprised this resulted in the correct shortlog
and diffstat, but that clearly explains it.
> I'll try sending this one again now.
I only started using b4 recently, so I wouldn't have caught it in the past,
as I wasn't paying close attention to the commit hashes. I usually
tried to ensure that the contents match up with the description, and
that worked fine. I've had sporadic problems in the past with b4 and
it's possible that I just papered over it with a manual merge thinking
that I did something wrong instead of b4 pointing out an actual
problem.
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2021-04-20 10:22 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-16 3:27 [GIT PULL] ARM: bmc: devicetree changes for 5.13, v2 Joel Stanley
2021-04-16 3:27 ` Joel Stanley
2021-04-19 14:44 ` Arnd Bergmann
2021-04-19 14:44 ` Arnd Bergmann
2021-04-20 7:11 ` Joel Stanley
2021-04-20 7:11 ` Joel Stanley
2021-04-20 10:18 ` Arnd Bergmann
2021-04-20 10:18 ` Arnd Bergmann
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.