[PATCH] gpio/gpio-pl061: Covert to use devm_* functions

[PATCH] gpio/gpio-pl061: Covert to use devm_* functions

[Tobias Klauser]

Use the devm_* family of functions during probe to reduce the error
handling code footprint.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
---
 drivers/gpio/gpio-pl061.c |   59 ++++++++++++++++----------------------------
 1 files changed, 22 insertions(+), 37 deletions(-)

diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c
index b4b5da4..31d9c9e 100644
--- a/drivers/gpio/gpio-pl061.c
+++ b/drivers/gpio/gpio-pl061.c
@@ -216,39 +216,34 @@ static void __init pl061_init_gc(struct pl061_gpio *chip, int irq_base)
 			       IRQ_GC_INIT_NESTED_LOCK, IRQ_NOREQUEST, 0);
 }
 
-static int pl061_probe(struct amba_device *dev, const struct amba_id *id)
+static int pl061_probe(struct amba_device *adev, const struct amba_id *id)
 {
-	struct pl061_platform_data *pdata;
+	struct device *dev = &adev->dev;
+	struct pl061_platform_data *pdata = dev->platform_data;
 	struct pl061_gpio *chip;
 	int ret, irq, i;
 
-	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
 	if (chip == NULL)
 		return -ENOMEM;
 
-	pdata = dev->dev.platform_data;
 	if (pdata) {
 		chip->gc.base = pdata->gpio_base;
 		chip->irq_base = pdata->irq_base;
-	} else if (dev->dev.of_node) {
+	} else if (adev->dev.of_node) {
 		chip->gc.base = -1;
 		chip->irq_base = 0;
-	} else {
-		ret = -ENODEV;
-		goto free_mem;
-	}
+	} else
+		return -ENODEV;
 
-	if (!request_mem_region(dev->res.start,
-				resource_size(&dev->res), "pl061")) {
-		ret = -EBUSY;
-		goto free_mem;
-	}
+	if (!devm_request_mem_region(dev, adev->res.start,
+				resource_size(&adev->res), "pl061"))
+		return -EBUSY;
 
-	chip->base = ioremap(dev->res.start, resource_size(&dev->res));
-	if (chip->base == NULL) {
-		ret = -ENOMEM;
-		goto release_region;
-	}
+	chip->base = devm_ioremap(dev, adev->res.start,
+				resource_size(&adev->res));
+	if (chip->base == NULL)
+		return -ENOMEM;
 
 	spin_lock_init(&chip->lock);
 
@@ -258,13 +253,13 @@ static int pl061_probe(struct amba_device *dev, const struct amba_id *id)
 	chip->gc.set = pl061_set_value;
 	chip->gc.to_irq = pl061_to_irq;
 	chip->gc.ngpio = PL061_GPIO_NR;
-	chip->gc.label = dev_name(&dev->dev);
-	chip->gc.dev = &dev->dev;
+	chip->gc.label = dev_name(dev);
+	chip->gc.dev = dev;
 	chip->gc.owner = THIS_MODULE;
 
 	ret = gpiochip_add(&chip->gc);
 	if (ret)
-		goto iounmap;
+		return ret;
 
 	/*
 	 * irq_chip support
@@ -276,11 +271,10 @@ static int pl061_probe(struct amba_device *dev, const struct amba_id *id)
 	pl061_init_gc(chip, chip->irq_base);
 
 	writeb(0, chip->base + GPIOIE); /* disable irqs */
-	irq = dev->irq[0];
-	if (irq < 0) {
-		ret = -ENODEV;
-		goto iounmap;
-	}
+	irq = adev->irq[0];
+	if (irq < 0)
+		return -ENODEV;
+
 	irq_set_chained_handler(irq, pl061_irq_handler);
 	irq_set_handler_data(irq, chip);
 
@@ -294,18 +288,9 @@ static int pl061_probe(struct amba_device *dev, const struct amba_id *id)
 		}
 	}
 
-	amba_set_drvdata(dev, chip);
+	amba_set_drvdata(adev, chip);
 
 	return 0;
-
-iounmap:
-	iounmap(chip->base);
-release_region:
-	release_mem_region(dev->res.start, resource_size(&dev->res));
-free_mem:
-	kfree(chip);
-
-	return ret;
 }
 
 #ifdef CONFIG_PM
-- 
1.7.5.4

Re: [PATCH] gpio/gpio-pl061: Covert to use devm_* functions

[Linus Walleij]

On Fri, Oct 5, 2012 at 11:45 AM, Tobias Klauser <tklauser@distanz.ch> wrote:

> Use the devm_* family of functions during probe to reduce the error
> handling code footprint.
>
> Signed-off-by: Tobias Klauser <tklauser@distanz.ch>

Looks good, patch applied.

Yours,
Linus Walleij