All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v2 0/4] pinctrl: meson-gxbb: add a bunch more pins
@ 2016-05-26 21:24 ` Kevin Hilman
  0 siblings, 0 replies; 27+ messages in thread
From: Kevin Hilman @ 2016-05-26 21:24 UTC (permalink / raw)
  To: Linus Walleij, linux-gpio
  Cc: linux-amlogic, linux-arm-kernel, Carlo Caione, Victor Wan,
	Jerry Cao, Xing Wu

Add support for several more devices, both in the EE domain and in the
AO domain.  Also, add the pins to the corresponding DTS files.

Tested on odroid-c2 and Amlogic P200 boards, and verified with working
ethernet.

Changes since v1:
- dropped the rename of uart_ao -> uart_ao_a (will be done as follow-up)
- rebased on linus/master
- dropped DT from series (will be merged through arm-soc)

Kevin

Kevin Hilman (4):
  pinctrl: amlogic: gxbb: add UART_AO_B, I2C
  pinctrl: amlogic: gxbb: add EMMC and SD pins
  pinctrl: amlogic: gxbb: add more UART pins
  pinctrl: amlogic: gxbb: add ethernet pins

 drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 163 ++++++++++++++++++++++++++++-
 1 file changed, 162 insertions(+), 1 deletion(-)

-- 
2.7.4


^ permalink raw reply	[flat|nested] 27+ messages in thread
* [PATCH v2 0/4] pinctrl: meson-gxbb: add a bunch more pins
@ 2016-05-26 21:24 ` Kevin Hilman
  0 siblings, 0 replies; 27+ messages in thread
From: Kevin Hilman @ 2016-05-26 21:24 UTC (permalink / raw)
  To: linux-arm-kernel

Add support for several more devices, both in the EE domain and in the
AO domain.  Also, add the pins to the corresponding DTS files.

Tested on odroid-c2 and Amlogic P200 boards, and verified with working
ethernet.

Changes since v1:
- dropped the rename of uart_ao -> uart_ao_a (will be done as follow-up)
- rebased on linus/master
- dropped DT from series (will be merged through arm-soc)

Kevin

Kevin Hilman (4):
  pinctrl: amlogic: gxbb: add UART_AO_B, I2C
  pinctrl: amlogic: gxbb: add EMMC and SD pins
  pinctrl: amlogic: gxbb: add more UART pins
  pinctrl: amlogic: gxbb: add ethernet pins

 drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 163 ++++++++++++++++++++++++++++-
 1 file changed, 162 insertions(+), 1 deletion(-)

-- 
2.7.4

^ permalink raw reply	[flat|nested] 27+ messages in thread
* [PATCH v2 0/4] pinctrl: meson-gxbb: add a bunch more pins
@ 2016-05-26 21:24 ` Kevin Hilman
  0 siblings, 0 replies; 27+ messages in thread
From: Kevin Hilman @ 2016-05-26 21:24 UTC (permalink / raw)
  To: linus-amlogic

Add support for several more devices, both in the EE domain and in the
AO domain.  Also, add the pins to the corresponding DTS files.

Tested on odroid-c2 and Amlogic P200 boards, and verified with working
ethernet.

Changes since v1:
- dropped the rename of uart_ao -> uart_ao_a (will be done as follow-up)
- rebased on linus/master
- dropped DT from series (will be merged through arm-soc)

Kevin

Kevin Hilman (4):
  pinctrl: amlogic: gxbb: add UART_AO_B, I2C
  pinctrl: amlogic: gxbb: add EMMC and SD pins
  pinctrl: amlogic: gxbb: add more UART pins
  pinctrl: amlogic: gxbb: add ethernet pins

 drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 163 ++++++++++++++++++++++++++++-
 1 file changed, 162 insertions(+), 1 deletion(-)

-- 
2.7.4

^ permalink raw reply	[flat|nested] 27+ messages in thread
* [PATCH v2 1/4] pinctrl: amlogic: gxbb: add UART_AO_B, I2C
  2016-05-26 21:24 ` Kevin Hilman
  (?)
@ 2016-05-26 21:24   ` Kevin Hilman
  -1 siblings, 0 replies; 27+ messages in thread
From: Kevin Hilman @ 2016-05-26 21:24 UTC (permalink / raw)
  To: Linus Walleij, linux-gpio
  Cc: linux-amlogic, linux-arm-kernel, Carlo Caione, Victor Wan,
	Jerry Cao, Xing Wu

Add pins for some more AO domain devices: UART_AO_B and I2C master &
slave.

Acked-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
---
 drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 35 +++++++++++++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index eeabafbbf598..a188d9dae0f2 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -168,6 +168,16 @@ static const unsigned int uart_tx_ao_a_pins[]	= { PIN(GPIOAO_0, 0) };
 static const unsigned int uart_rx_ao_a_pins[]	= { PIN(GPIOAO_1, 0) };
 static const unsigned int uart_cts_ao_a_pins[]	= { PIN(GPIOAO_2, 0) };
 static const unsigned int uart_rts_ao_a_pins[]	= { PIN(GPIOAO_3, 0) };
+static const unsigned int uart_tx_ao_b_pins[]	= { PIN(GPIOAO_0, 0) };
+static const unsigned int uart_rx_ao_b_pins[]	= { PIN(GPIOAO_1, 0),
+						    PIN(GPIOAO_5, 0) };
+static const unsigned int uart_cts_ao_b_pins[]	= { PIN(GPIOAO_2, 0) };
+static const unsigned int uart_rts_ao_b_pins[]	= { PIN(GPIOAO_3, 0) };
+
+static const unsigned int i2c_sck_ao_pins[] = {PIN(GPIOAO_4, 0) };
+static const unsigned int i2c_sda_ao_pins[] = {PIN(GPIOAO_5, 0) };
+static const unsigned int i2c_slave_sck_ao_pins[] = {PIN(GPIOAO_4, 0) };
+static const unsigned int i2c_slave_sda_ao_pins[] = {PIN(GPIOAO_5, 0) };
 
 static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
 	GPIO_GROUP(GPIOZ_0, EE_OFF),
@@ -316,10 +326,18 @@ static struct meson_pmx_group meson_gxbb_aobus_groups[] = {
 	GPIO_GROUP(GPIOAO_13, 0),
 
 	/* bank AO */
+	GROUP(uart_tx_ao_b,	0,	26),
+	GROUP(uart_rx_ao_b,	0,	25),
 	GROUP(uart_tx_ao_a,	0,	12),
 	GROUP(uart_rx_ao_a,	0,	11),
 	GROUP(uart_cts_ao_a,	0,	10),
 	GROUP(uart_rts_ao_a,	0,	9),
+	GROUP(uart_cts_ao_b,	0,	8),
+	GROUP(uart_rts_ao_b,	0,	7),
+	GROUP(i2c_sck_ao,	0,	6),
+	GROUP(i2c_sda_ao,	0,	5),
+	GROUP(i2c_slave_sck_ao, 0,	2),
+	GROUP(i2c_slave_sda_ao, 0,	1),
 };
 
 static const char * const gpio_periphs_groups[] = {
@@ -366,7 +384,19 @@ static const char * const gpio_aobus_groups[] = {
 };
 
 static const char * const uart_ao_groups[] = {
-	"uart_tx_ao_a", "uart_rx_ao_a", "uart_cts_ao_a", "uart_rts_ao_a"
+	"uart_tx_ao_a", "uart_rx_ao_a", "uart_cts_ao_a", "uart_rts_ao_a",
+};
+
+static const char * const uart_ao_b_groups[] = {
+	"uart_tx_ao_b", "uart_rx_ao_b", "uart_cts_ao_b", "uart_rts_ao_b",
+};
+
+static const char * const i2c_ao_groups[] = {
+	"i2c_sdk_ao", "i2c_sda_ao",
+};
+
+static const char * const i2c_slave_ao_groups[] = {
+	"i2c_slave_sdk_ao", "i2c_slave_sda_ao",
 };
 
 static struct meson_pmx_func meson_gxbb_periphs_functions[] = {
@@ -376,6 +406,9 @@ static struct meson_pmx_func meson_gxbb_periphs_functions[] = {
 static struct meson_pmx_func meson_gxbb_aobus_functions[] = {
 	FUNCTION(gpio_aobus),
 	FUNCTION(uart_ao),
+	FUNCTION(uart_ao_b),
+	FUNCTION(i2c_ao),
+	FUNCTION(i2c_slave_ao),
 };
 
 static struct meson_bank meson_gxbb_periphs_banks[] = {
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 27+ messages in thread
* [PATCH v2 1/4] pinctrl: amlogic: gxbb: add UART_AO_B, I2C
@ 2016-05-26 21:24   ` Kevin Hilman
  0 siblings, 0 replies; 27+ messages in thread
From: Kevin Hilman @ 2016-05-26 21:24 UTC (permalink / raw)
  To: linux-arm-kernel

Add pins for some more AO domain devices: UART_AO_B and I2C master &
slave.

Acked-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
---
 drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 35 +++++++++++++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index eeabafbbf598..a188d9dae0f2 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -168,6 +168,16 @@ static const unsigned int uart_tx_ao_a_pins[]	= { PIN(GPIOAO_0, 0) };
 static const unsigned int uart_rx_ao_a_pins[]	= { PIN(GPIOAO_1, 0) };
 static const unsigned int uart_cts_ao_a_pins[]	= { PIN(GPIOAO_2, 0) };
 static const unsigned int uart_rts_ao_a_pins[]	= { PIN(GPIOAO_3, 0) };
+static const unsigned int uart_tx_ao_b_pins[]	= { PIN(GPIOAO_0, 0) };
+static const unsigned int uart_rx_ao_b_pins[]	= { PIN(GPIOAO_1, 0),
+						    PIN(GPIOAO_5, 0) };
+static const unsigned int uart_cts_ao_b_pins[]	= { PIN(GPIOAO_2, 0) };
+static const unsigned int uart_rts_ao_b_pins[]	= { PIN(GPIOAO_3, 0) };
+
+static const unsigned int i2c_sck_ao_pins[] = {PIN(GPIOAO_4, 0) };
+static const unsigned int i2c_sda_ao_pins[] = {PIN(GPIOAO_5, 0) };
+static const unsigned int i2c_slave_sck_ao_pins[] = {PIN(GPIOAO_4, 0) };
+static const unsigned int i2c_slave_sda_ao_pins[] = {PIN(GPIOAO_5, 0) };
 
 static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
 	GPIO_GROUP(GPIOZ_0, EE_OFF),
@@ -316,10 +326,18 @@ static struct meson_pmx_group meson_gxbb_aobus_groups[] = {
 	GPIO_GROUP(GPIOAO_13, 0),
 
 	/* bank AO */
+	GROUP(uart_tx_ao_b,	0,	26),
+	GROUP(uart_rx_ao_b,	0,	25),
 	GROUP(uart_tx_ao_a,	0,	12),
 	GROUP(uart_rx_ao_a,	0,	11),
 	GROUP(uart_cts_ao_a,	0,	10),
 	GROUP(uart_rts_ao_a,	0,	9),
+	GROUP(uart_cts_ao_b,	0,	8),
+	GROUP(uart_rts_ao_b,	0,	7),
+	GROUP(i2c_sck_ao,	0,	6),
+	GROUP(i2c_sda_ao,	0,	5),
+	GROUP(i2c_slave_sck_ao, 0,	2),
+	GROUP(i2c_slave_sda_ao, 0,	1),
 };
 
 static const char * const gpio_periphs_groups[] = {
@@ -366,7 +384,19 @@ static const char * const gpio_aobus_groups[] = {
 };
 
 static const char * const uart_ao_groups[] = {
-	"uart_tx_ao_a", "uart_rx_ao_a", "uart_cts_ao_a", "uart_rts_ao_a"
+	"uart_tx_ao_a", "uart_rx_ao_a", "uart_cts_ao_a", "uart_rts_ao_a",
+};
+
+static const char * const uart_ao_b_groups[] = {
+	"uart_tx_ao_b", "uart_rx_ao_b", "uart_cts_ao_b", "uart_rts_ao_b",
+};
+
+static const char * const i2c_ao_groups[] = {
+	"i2c_sdk_ao", "i2c_sda_ao",
+};
+
+static const char * const i2c_slave_ao_groups[] = {
+	"i2c_slave_sdk_ao", "i2c_slave_sda_ao",
 };
 
 static struct meson_pmx_func meson_gxbb_periphs_functions[] = {
@@ -376,6 +406,9 @@ static struct meson_pmx_func meson_gxbb_periphs_functions[] = {
 static struct meson_pmx_func meson_gxbb_aobus_functions[] = {
 	FUNCTION(gpio_aobus),
 	FUNCTION(uart_ao),
+	FUNCTION(uart_ao_b),
+	FUNCTION(i2c_ao),
+	FUNCTION(i2c_slave_ao),
 };
 
 static struct meson_bank meson_gxbb_periphs_banks[] = {
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 27+ messages in thread
* [PATCH v2 1/4] pinctrl: amlogic: gxbb: add UART_AO_B, I2C
@ 2016-05-26 21:24   ` Kevin Hilman
  0 siblings, 0 replies; 27+ messages in thread
From: Kevin Hilman @ 2016-05-26 21:24 UTC (permalink / raw)
  To: linus-amlogic

Add pins for some more AO domain devices: UART_AO_B and I2C master &
slave.

Acked-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
---
 drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 35 +++++++++++++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index eeabafbbf598..a188d9dae0f2 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -168,6 +168,16 @@ static const unsigned int uart_tx_ao_a_pins[]	= { PIN(GPIOAO_0, 0) };
 static const unsigned int uart_rx_ao_a_pins[]	= { PIN(GPIOAO_1, 0) };
 static const unsigned int uart_cts_ao_a_pins[]	= { PIN(GPIOAO_2, 0) };
 static const unsigned int uart_rts_ao_a_pins[]	= { PIN(GPIOAO_3, 0) };
+static const unsigned int uart_tx_ao_b_pins[]	= { PIN(GPIOAO_0, 0) };
+static const unsigned int uart_rx_ao_b_pins[]	= { PIN(GPIOAO_1, 0),
+						    PIN(GPIOAO_5, 0) };
+static const unsigned int uart_cts_ao_b_pins[]	= { PIN(GPIOAO_2, 0) };
+static const unsigned int uart_rts_ao_b_pins[]	= { PIN(GPIOAO_3, 0) };
+
+static const unsigned int i2c_sck_ao_pins[] = {PIN(GPIOAO_4, 0) };
+static const unsigned int i2c_sda_ao_pins[] = {PIN(GPIOAO_5, 0) };
+static const unsigned int i2c_slave_sck_ao_pins[] = {PIN(GPIOAO_4, 0) };
+static const unsigned int i2c_slave_sda_ao_pins[] = {PIN(GPIOAO_5, 0) };
 
 static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
 	GPIO_GROUP(GPIOZ_0, EE_OFF),
@@ -316,10 +326,18 @@ static struct meson_pmx_group meson_gxbb_aobus_groups[] = {
 	GPIO_GROUP(GPIOAO_13, 0),
 
 	/* bank AO */
+	GROUP(uart_tx_ao_b,	0,	26),
+	GROUP(uart_rx_ao_b,	0,	25),
 	GROUP(uart_tx_ao_a,	0,	12),
 	GROUP(uart_rx_ao_a,	0,	11),
 	GROUP(uart_cts_ao_a,	0,	10),
 	GROUP(uart_rts_ao_a,	0,	9),
+	GROUP(uart_cts_ao_b,	0,	8),
+	GROUP(uart_rts_ao_b,	0,	7),
+	GROUP(i2c_sck_ao,	0,	6),
+	GROUP(i2c_sda_ao,	0,	5),
+	GROUP(i2c_slave_sck_ao, 0,	2),
+	GROUP(i2c_slave_sda_ao, 0,	1),
 };
 
 static const char * const gpio_periphs_groups[] = {
@@ -366,7 +384,19 @@ static const char * const gpio_aobus_groups[] = {
 };
 
 static const char * const uart_ao_groups[] = {
-	"uart_tx_ao_a", "uart_rx_ao_a", "uart_cts_ao_a", "uart_rts_ao_a"
+	"uart_tx_ao_a", "uart_rx_ao_a", "uart_cts_ao_a", "uart_rts_ao_a",
+};
+
+static const char * const uart_ao_b_groups[] = {
+	"uart_tx_ao_b", "uart_rx_ao_b", "uart_cts_ao_b", "uart_rts_ao_b",
+};
+
+static const char * const i2c_ao_groups[] = {
+	"i2c_sdk_ao", "i2c_sda_ao",
+};
+
+static const char * const i2c_slave_ao_groups[] = {
+	"i2c_slave_sdk_ao", "i2c_slave_sda_ao",
 };
 
 static struct meson_pmx_func meson_gxbb_periphs_functions[] = {
@@ -376,6 +406,9 @@ static struct meson_pmx_func meson_gxbb_periphs_functions[] = {
 static struct meson_pmx_func meson_gxbb_aobus_functions[] = {
 	FUNCTION(gpio_aobus),
 	FUNCTION(uart_ao),
+	FUNCTION(uart_ao_b),
+	FUNCTION(i2c_ao),
+	FUNCTION(i2c_slave_ao),
 };
 
 static struct meson_bank meson_gxbb_periphs_banks[] = {
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 27+ messages in thread
* [PATCH v2 2/4] pinctrl: amlogic: gxbb: add EMMC and SD pins
  2016-05-26 21:24 ` Kevin Hilman
  (?)
@ 2016-05-26 21:24   ` Kevin Hilman
  -1 siblings, 0 replies; 27+ messages in thread
From: Kevin Hilman @ 2016-05-26 21:24 UTC (permalink / raw)
  To: Linus Walleij, linux-gpio
  Cc: linux-amlogic, linux-arm-kernel, Carlo Caione, Victor Wan,
	Jerry Cao, Xing Wu

Add EE domain pins for eMMC and SD card.

Acked-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
---
 drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 41 ++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index a188d9dae0f2..f0459f26c16c 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -147,6 +147,22 @@ static const struct pinctrl_pin_desc meson_gxbb_periphs_pins[] = {
 	MESON_PIN(GPIO_TEST_N, EE_OFF),
 };
 
+static const unsigned int emmc_nand_d07_pins[] = {
+	PIN(BOOT_0, EE_OFF), PIN(BOOT_1, EE_OFF), PIN(BOOT_2, EE_OFF),
+	PIN(BOOT_3, EE_OFF), PIN(BOOT_4, EE_OFF), PIN(BOOT_5, EE_OFF),
+	PIN(BOOT_6, EE_OFF), PIN(BOOT_7, EE_OFF),
+};
+static const unsigned int emmc_clk_pins[] = { PIN(BOOT_8, EE_OFF) };
+static const unsigned int emmc_cmd_pins[] = { PIN(BOOT_10, EE_OFF) };
+static const unsigned int emmc_ds_pins[] = { PIN(BOOT_15, EE_OFF) };
+
+static const unsigned int sdcard_d0_pins[] = { PIN(CARD_1, EE_OFF) };
+static const unsigned int sdcard_d1_pins[] = { PIN(CARD_0, EE_OFF) };
+static const unsigned int sdcard_d2_pins[] = { PIN(CARD_5, EE_OFF) };
+static const unsigned int sdcard_d3_pins[] = { PIN(CARD_4, EE_OFF) };
+static const unsigned int sdcard_cmd_pins[] = { PIN(CARD_3, EE_OFF) };
+static const unsigned int sdcard_clk_pins[] = { PIN(CARD_2, EE_OFF) };
+
 static const struct pinctrl_pin_desc meson_gxbb_aobus_pins[] = {
 	MESON_PIN(GPIOAO_0, 0),
 	MESON_PIN(GPIOAO_1, 0),
@@ -307,6 +323,20 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
 	GPIO_GROUP(GPIOCLK_3, EE_OFF),
 
 	GPIO_GROUP(GPIO_TEST_N, EE_OFF),
+
+	/* Bank BOOT */
+	GROUP(emmc_nand_d07,	4,	30),
+	GROUP(emmc_clk,		4,	18),
+	GROUP(emmc_cmd,		4,	19),
+	GROUP(emmc_ds,		4,	31),
+
+	/* Bank CARD */
+	GROUP(sdcard_d1,	2,	14),
+	GROUP(sdcard_d0,	2,	15),
+	GROUP(sdcard_d3,	2,	12),
+	GROUP(sdcard_d2,	2,	13),
+	GROUP(sdcard_cmd,	2,	10),
+	GROUP(sdcard_clk,	2,	11),
 };
 
 static struct meson_pmx_group meson_gxbb_aobus_groups[] = {
@@ -377,6 +407,15 @@ static const char * const gpio_periphs_groups[] = {
 	"GPIO_TEST_N",
 };
 
+static const char * const emmc_groups[] = {
+	"emmc_nand_d07", "emmc_clk", "emmc_cmd", "emmc_ds",
+};
+
+static const char * const sdcard_groups[] = {
+	"sdcard_d0", "sdcard_d1", "sdcard_d2", "sdcard_d3",
+	"sdcard_cmd", "sdcard_clk",
+};
+
 static const char * const gpio_aobus_groups[] = {
 	"GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3", "GPIOAO_4",
 	"GPIOAO_5", "GPIOAO_6", "GPIOAO_7", "GPIOAO_8", "GPIOAO_9",
@@ -401,6 +440,8 @@ static const char * const i2c_slave_ao_groups[] = {
 
 static struct meson_pmx_func meson_gxbb_periphs_functions[] = {
 	FUNCTION(gpio_periphs),
+	FUNCTION(emmc),
+	FUNCTION(sdcard),
 };
 
 static struct meson_pmx_func meson_gxbb_aobus_functions[] = {
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 27+ messages in thread
* [PATCH v2 2/4] pinctrl: amlogic: gxbb: add EMMC and SD pins
@ 2016-05-26 21:24   ` Kevin Hilman
  0 siblings, 0 replies; 27+ messages in thread
From: Kevin Hilman @ 2016-05-26 21:24 UTC (permalink / raw)
  To: linux-arm-kernel

Add EE domain pins for eMMC and SD card.

Acked-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
---
 drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 41 ++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index a188d9dae0f2..f0459f26c16c 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -147,6 +147,22 @@ static const struct pinctrl_pin_desc meson_gxbb_periphs_pins[] = {
 	MESON_PIN(GPIO_TEST_N, EE_OFF),
 };
 
+static const unsigned int emmc_nand_d07_pins[] = {
+	PIN(BOOT_0, EE_OFF), PIN(BOOT_1, EE_OFF), PIN(BOOT_2, EE_OFF),
+	PIN(BOOT_3, EE_OFF), PIN(BOOT_4, EE_OFF), PIN(BOOT_5, EE_OFF),
+	PIN(BOOT_6, EE_OFF), PIN(BOOT_7, EE_OFF),
+};
+static const unsigned int emmc_clk_pins[] = { PIN(BOOT_8, EE_OFF) };
+static const unsigned int emmc_cmd_pins[] = { PIN(BOOT_10, EE_OFF) };
+static const unsigned int emmc_ds_pins[] = { PIN(BOOT_15, EE_OFF) };
+
+static const unsigned int sdcard_d0_pins[] = { PIN(CARD_1, EE_OFF) };
+static const unsigned int sdcard_d1_pins[] = { PIN(CARD_0, EE_OFF) };
+static const unsigned int sdcard_d2_pins[] = { PIN(CARD_5, EE_OFF) };
+static const unsigned int sdcard_d3_pins[] = { PIN(CARD_4, EE_OFF) };
+static const unsigned int sdcard_cmd_pins[] = { PIN(CARD_3, EE_OFF) };
+static const unsigned int sdcard_clk_pins[] = { PIN(CARD_2, EE_OFF) };
+
 static const struct pinctrl_pin_desc meson_gxbb_aobus_pins[] = {
 	MESON_PIN(GPIOAO_0, 0),
 	MESON_PIN(GPIOAO_1, 0),
@@ -307,6 +323,20 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
 	GPIO_GROUP(GPIOCLK_3, EE_OFF),
 
 	GPIO_GROUP(GPIO_TEST_N, EE_OFF),
+
+	/* Bank BOOT */
+	GROUP(emmc_nand_d07,	4,	30),
+	GROUP(emmc_clk,		4,	18),
+	GROUP(emmc_cmd,		4,	19),
+	GROUP(emmc_ds,		4,	31),
+
+	/* Bank CARD */
+	GROUP(sdcard_d1,	2,	14),
+	GROUP(sdcard_d0,	2,	15),
+	GROUP(sdcard_d3,	2,	12),
+	GROUP(sdcard_d2,	2,	13),
+	GROUP(sdcard_cmd,	2,	10),
+	GROUP(sdcard_clk,	2,	11),
 };
 
 static struct meson_pmx_group meson_gxbb_aobus_groups[] = {
@@ -377,6 +407,15 @@ static const char * const gpio_periphs_groups[] = {
 	"GPIO_TEST_N",
 };
 
+static const char * const emmc_groups[] = {
+	"emmc_nand_d07", "emmc_clk", "emmc_cmd", "emmc_ds",
+};
+
+static const char * const sdcard_groups[] = {
+	"sdcard_d0", "sdcard_d1", "sdcard_d2", "sdcard_d3",
+	"sdcard_cmd", "sdcard_clk",
+};
+
 static const char * const gpio_aobus_groups[] = {
 	"GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3", "GPIOAO_4",
 	"GPIOAO_5", "GPIOAO_6", "GPIOAO_7", "GPIOAO_8", "GPIOAO_9",
@@ -401,6 +440,8 @@ static const char * const i2c_slave_ao_groups[] = {
 
 static struct meson_pmx_func meson_gxbb_periphs_functions[] = {
 	FUNCTION(gpio_periphs),
+	FUNCTION(emmc),
+	FUNCTION(sdcard),
 };
 
 static struct meson_pmx_func meson_gxbb_aobus_functions[] = {
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 27+ messages in thread
* [PATCH v2 2/4] pinctrl: amlogic: gxbb: add EMMC and SD pins
@ 2016-05-26 21:24   ` Kevin Hilman
  0 siblings, 0 replies; 27+ messages in thread
From: Kevin Hilman @ 2016-05-26 21:24 UTC (permalink / raw)
  To: linus-amlogic

Add EE domain pins for eMMC and SD card.

Acked-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
---
 drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 41 ++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index a188d9dae0f2..f0459f26c16c 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -147,6 +147,22 @@ static const struct pinctrl_pin_desc meson_gxbb_periphs_pins[] = {
 	MESON_PIN(GPIO_TEST_N, EE_OFF),
 };
 
+static const unsigned int emmc_nand_d07_pins[] = {
+	PIN(BOOT_0, EE_OFF), PIN(BOOT_1, EE_OFF), PIN(BOOT_2, EE_OFF),
+	PIN(BOOT_3, EE_OFF), PIN(BOOT_4, EE_OFF), PIN(BOOT_5, EE_OFF),
+	PIN(BOOT_6, EE_OFF), PIN(BOOT_7, EE_OFF),
+};
+static const unsigned int emmc_clk_pins[] = { PIN(BOOT_8, EE_OFF) };
+static const unsigned int emmc_cmd_pins[] = { PIN(BOOT_10, EE_OFF) };
+static const unsigned int emmc_ds_pins[] = { PIN(BOOT_15, EE_OFF) };
+
+static const unsigned int sdcard_d0_pins[] = { PIN(CARD_1, EE_OFF) };
+static const unsigned int sdcard_d1_pins[] = { PIN(CARD_0, EE_OFF) };
+static const unsigned int sdcard_d2_pins[] = { PIN(CARD_5, EE_OFF) };
+static const unsigned int sdcard_d3_pins[] = { PIN(CARD_4, EE_OFF) };
+static const unsigned int sdcard_cmd_pins[] = { PIN(CARD_3, EE_OFF) };
+static const unsigned int sdcard_clk_pins[] = { PIN(CARD_2, EE_OFF) };
+
 static const struct pinctrl_pin_desc meson_gxbb_aobus_pins[] = {
 	MESON_PIN(GPIOAO_0, 0),
 	MESON_PIN(GPIOAO_1, 0),
@@ -307,6 +323,20 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
 	GPIO_GROUP(GPIOCLK_3, EE_OFF),
 
 	GPIO_GROUP(GPIO_TEST_N, EE_OFF),
+
+	/* Bank BOOT */
+	GROUP(emmc_nand_d07,	4,	30),
+	GROUP(emmc_clk,		4,	18),
+	GROUP(emmc_cmd,		4,	19),
+	GROUP(emmc_ds,		4,	31),
+
+	/* Bank CARD */
+	GROUP(sdcard_d1,	2,	14),
+	GROUP(sdcard_d0,	2,	15),
+	GROUP(sdcard_d3,	2,	12),
+	GROUP(sdcard_d2,	2,	13),
+	GROUP(sdcard_cmd,	2,	10),
+	GROUP(sdcard_clk,	2,	11),
 };
 
 static struct meson_pmx_group meson_gxbb_aobus_groups[] = {
@@ -377,6 +407,15 @@ static const char * const gpio_periphs_groups[] = {
 	"GPIO_TEST_N",
 };
 
+static const char * const emmc_groups[] = {
+	"emmc_nand_d07", "emmc_clk", "emmc_cmd", "emmc_ds",
+};
+
+static const char * const sdcard_groups[] = {
+	"sdcard_d0", "sdcard_d1", "sdcard_d2", "sdcard_d3",
+	"sdcard_cmd", "sdcard_clk",
+};
+
 static const char * const gpio_aobus_groups[] = {
 	"GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3", "GPIOAO_4",
 	"GPIOAO_5", "GPIOAO_6", "GPIOAO_7", "GPIOAO_8", "GPIOAO_9",
@@ -401,6 +440,8 @@ static const char * const i2c_slave_ao_groups[] = {
 
 static struct meson_pmx_func meson_gxbb_periphs_functions[] = {
 	FUNCTION(gpio_periphs),
+	FUNCTION(emmc),
+	FUNCTION(sdcard),
 };
 
 static struct meson_pmx_func meson_gxbb_aobus_functions[] = {
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 27+ messages in thread
* [PATCH v2 3/4] pinctrl: amlogic: gxbb: add more UART pins
  2016-05-26 21:24 ` Kevin Hilman
  (?)
@ 2016-05-26 21:24   ` Kevin Hilman
  -1 siblings, 0 replies; 27+ messages in thread
From: Kevin Hilman @ 2016-05-26 21:24 UTC (permalink / raw)
  To: Linus Walleij, linux-gpio
  Cc: linux-amlogic, linux-arm-kernel, Carlo Caione, Victor Wan,
	Jerry Cao, Xing Wu

Add EE domain pins for UART A, B & C.

Acked-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
---
 drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 48 ++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index f0459f26c16c..b2ec5f8ada33 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -163,6 +163,21 @@ static const unsigned int sdcard_d3_pins[] = { PIN(CARD_4, EE_OFF) };
 static const unsigned int sdcard_cmd_pins[] = { PIN(CARD_3, EE_OFF) };
 static const unsigned int sdcard_clk_pins[] = { PIN(CARD_2, EE_OFF) };
 
+static const unsigned int uart_tx_a_pins[]	= { PIN(GPIOX_12, EE_OFF) };
+static const unsigned int uart_rx_a_pins[]	= { PIN(GPIOX_13, EE_OFF) };
+static const unsigned int uart_cts_a_pins[]	= { PIN(GPIOX_14, EE_OFF) };
+static const unsigned int uart_rts_a_pins[]	= { PIN(GPIOX_15, EE_OFF) };
+
+static const unsigned int uart_tx_b_pins[]	= { PIN(GPIODV_24, EE_OFF) };
+static const unsigned int uart_rx_b_pins[]	= { PIN(GPIODV_25, EE_OFF) };
+static const unsigned int uart_cts_b_pins[]	= { PIN(GPIODV_26, EE_OFF) };
+static const unsigned int uart_rts_b_pins[]	= { PIN(GPIODV_27, EE_OFF) };
+
+static const unsigned int uart_tx_c_pins[]	= { PIN(GPIOY_13, EE_OFF) };
+static const unsigned int uart_rx_c_pins[]	= { PIN(GPIOY_14, EE_OFF) };
+static const unsigned int uart_cts_c_pins[]	= { PIN(GPIOX_11, EE_OFF) };
+static const unsigned int uart_rts_c_pins[]	= { PIN(GPIOX_12, EE_OFF) };
+
 static const struct pinctrl_pin_desc meson_gxbb_aobus_pins[] = {
 	MESON_PIN(GPIOAO_0, 0),
 	MESON_PIN(GPIOAO_1, 0),
@@ -324,6 +339,24 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
 
 	GPIO_GROUP(GPIO_TEST_N, EE_OFF),
 
+	/* Bank X */
+	GROUP(uart_tx_a,	4,	13),
+	GROUP(uart_rx_a,	4,	12),
+	GROUP(uart_cts_a,	4,	11),
+	GROUP(uart_rts_a,	4,	10),
+
+	/* Bank Y */
+	GROUP(uart_cts_c,	1,	19),
+	GROUP(uart_rts_c,	1,	18),
+	GROUP(uart_tx_c,	1,	17),
+	GROUP(uart_rx_c,	1,	16),
+
+	/* Bank DV */
+	GROUP(uart_tx_b,	2,	29),
+	GROUP(uart_rx_b,	2,	28),
+	GROUP(uart_cts_b,	2,	27),
+	GROUP(uart_rts_b,	2,	26),
+
 	/* Bank BOOT */
 	GROUP(emmc_nand_d07,	4,	30),
 	GROUP(emmc_clk,		4,	18),
@@ -416,6 +449,18 @@ static const char * const sdcard_groups[] = {
 	"sdcard_cmd", "sdcard_clk",
 };
 
+static const char * const uart_a_groups[] = {
+	"uart_tx_a", "uart_rx_a", "uart_cts_a", "uart_rts_a",
+};
+
+static const char * const uart_b_groups[] = {
+	"uart_tx_b", "uart_rx_b", "uart_cts_b", "uart_rts_b",
+};
+
+static const char * const uart_c_groups[] = {
+	"uart_tx_c", "uart_rx_c", "uart_cts_c", "uart_rts_c",
+};
+
 static const char * const gpio_aobus_groups[] = {
 	"GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3", "GPIOAO_4",
 	"GPIOAO_5", "GPIOAO_6", "GPIOAO_7", "GPIOAO_8", "GPIOAO_9",
@@ -442,6 +487,9 @@ static struct meson_pmx_func meson_gxbb_periphs_functions[] = {
 	FUNCTION(gpio_periphs),
 	FUNCTION(emmc),
 	FUNCTION(sdcard),
+	FUNCTION(uart_a),
+	FUNCTION(uart_b),
+	FUNCTION(uart_c),
 };
 
 static struct meson_pmx_func meson_gxbb_aobus_functions[] = {
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 27+ messages in thread
* [PATCH v2 3/4] pinctrl: amlogic: gxbb: add more UART pins
@ 2016-05-26 21:24   ` Kevin Hilman
  0 siblings, 0 replies; 27+ messages in thread
From: Kevin Hilman @ 2016-05-26 21:24 UTC (permalink / raw)
  To: linux-arm-kernel

Add EE domain pins for UART A, B & C.

Acked-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
---
 drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 48 ++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index f0459f26c16c..b2ec5f8ada33 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -163,6 +163,21 @@ static const unsigned int sdcard_d3_pins[] = { PIN(CARD_4, EE_OFF) };
 static const unsigned int sdcard_cmd_pins[] = { PIN(CARD_3, EE_OFF) };
 static const unsigned int sdcard_clk_pins[] = { PIN(CARD_2, EE_OFF) };
 
+static const unsigned int uart_tx_a_pins[]	= { PIN(GPIOX_12, EE_OFF) };
+static const unsigned int uart_rx_a_pins[]	= { PIN(GPIOX_13, EE_OFF) };
+static const unsigned int uart_cts_a_pins[]	= { PIN(GPIOX_14, EE_OFF) };
+static const unsigned int uart_rts_a_pins[]	= { PIN(GPIOX_15, EE_OFF) };
+
+static const unsigned int uart_tx_b_pins[]	= { PIN(GPIODV_24, EE_OFF) };
+static const unsigned int uart_rx_b_pins[]	= { PIN(GPIODV_25, EE_OFF) };
+static const unsigned int uart_cts_b_pins[]	= { PIN(GPIODV_26, EE_OFF) };
+static const unsigned int uart_rts_b_pins[]	= { PIN(GPIODV_27, EE_OFF) };
+
+static const unsigned int uart_tx_c_pins[]	= { PIN(GPIOY_13, EE_OFF) };
+static const unsigned int uart_rx_c_pins[]	= { PIN(GPIOY_14, EE_OFF) };
+static const unsigned int uart_cts_c_pins[]	= { PIN(GPIOX_11, EE_OFF) };
+static const unsigned int uart_rts_c_pins[]	= { PIN(GPIOX_12, EE_OFF) };
+
 static const struct pinctrl_pin_desc meson_gxbb_aobus_pins[] = {
 	MESON_PIN(GPIOAO_0, 0),
 	MESON_PIN(GPIOAO_1, 0),
@@ -324,6 +339,24 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
 
 	GPIO_GROUP(GPIO_TEST_N, EE_OFF),
 
+	/* Bank X */
+	GROUP(uart_tx_a,	4,	13),
+	GROUP(uart_rx_a,	4,	12),
+	GROUP(uart_cts_a,	4,	11),
+	GROUP(uart_rts_a,	4,	10),
+
+	/* Bank Y */
+	GROUP(uart_cts_c,	1,	19),
+	GROUP(uart_rts_c,	1,	18),
+	GROUP(uart_tx_c,	1,	17),
+	GROUP(uart_rx_c,	1,	16),
+
+	/* Bank DV */
+	GROUP(uart_tx_b,	2,	29),
+	GROUP(uart_rx_b,	2,	28),
+	GROUP(uart_cts_b,	2,	27),
+	GROUP(uart_rts_b,	2,	26),
+
 	/* Bank BOOT */
 	GROUP(emmc_nand_d07,	4,	30),
 	GROUP(emmc_clk,		4,	18),
@@ -416,6 +449,18 @@ static const char * const sdcard_groups[] = {
 	"sdcard_cmd", "sdcard_clk",
 };
 
+static const char * const uart_a_groups[] = {
+	"uart_tx_a", "uart_rx_a", "uart_cts_a", "uart_rts_a",
+};
+
+static const char * const uart_b_groups[] = {
+	"uart_tx_b", "uart_rx_b", "uart_cts_b", "uart_rts_b",
+};
+
+static const char * const uart_c_groups[] = {
+	"uart_tx_c", "uart_rx_c", "uart_cts_c", "uart_rts_c",
+};
+
 static const char * const gpio_aobus_groups[] = {
 	"GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3", "GPIOAO_4",
 	"GPIOAO_5", "GPIOAO_6", "GPIOAO_7", "GPIOAO_8", "GPIOAO_9",
@@ -442,6 +487,9 @@ static struct meson_pmx_func meson_gxbb_periphs_functions[] = {
 	FUNCTION(gpio_periphs),
 	FUNCTION(emmc),
 	FUNCTION(sdcard),
+	FUNCTION(uart_a),
+	FUNCTION(uart_b),
+	FUNCTION(uart_c),
 };
 
 static struct meson_pmx_func meson_gxbb_aobus_functions[] = {
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 27+ messages in thread
* [PATCH v2 3/4] pinctrl: amlogic: gxbb: add more UART pins
@ 2016-05-26 21:24   ` Kevin Hilman
  0 siblings, 0 replies; 27+ messages in thread
From: Kevin Hilman @ 2016-05-26 21:24 UTC (permalink / raw)
  To: linus-amlogic

Add EE domain pins for UART A, B & C.

Acked-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
---
 drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 48 ++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index f0459f26c16c..b2ec5f8ada33 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -163,6 +163,21 @@ static const unsigned int sdcard_d3_pins[] = { PIN(CARD_4, EE_OFF) };
 static const unsigned int sdcard_cmd_pins[] = { PIN(CARD_3, EE_OFF) };
 static const unsigned int sdcard_clk_pins[] = { PIN(CARD_2, EE_OFF) };
 
+static const unsigned int uart_tx_a_pins[]	= { PIN(GPIOX_12, EE_OFF) };
+static const unsigned int uart_rx_a_pins[]	= { PIN(GPIOX_13, EE_OFF) };
+static const unsigned int uart_cts_a_pins[]	= { PIN(GPIOX_14, EE_OFF) };
+static const unsigned int uart_rts_a_pins[]	= { PIN(GPIOX_15, EE_OFF) };
+
+static const unsigned int uart_tx_b_pins[]	= { PIN(GPIODV_24, EE_OFF) };
+static const unsigned int uart_rx_b_pins[]	= { PIN(GPIODV_25, EE_OFF) };
+static const unsigned int uart_cts_b_pins[]	= { PIN(GPIODV_26, EE_OFF) };
+static const unsigned int uart_rts_b_pins[]	= { PIN(GPIODV_27, EE_OFF) };
+
+static const unsigned int uart_tx_c_pins[]	= { PIN(GPIOY_13, EE_OFF) };
+static const unsigned int uart_rx_c_pins[]	= { PIN(GPIOY_14, EE_OFF) };
+static const unsigned int uart_cts_c_pins[]	= { PIN(GPIOX_11, EE_OFF) };
+static const unsigned int uart_rts_c_pins[]	= { PIN(GPIOX_12, EE_OFF) };
+
 static const struct pinctrl_pin_desc meson_gxbb_aobus_pins[] = {
 	MESON_PIN(GPIOAO_0, 0),
 	MESON_PIN(GPIOAO_1, 0),
@@ -324,6 +339,24 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
 
 	GPIO_GROUP(GPIO_TEST_N, EE_OFF),
 
+	/* Bank X */
+	GROUP(uart_tx_a,	4,	13),
+	GROUP(uart_rx_a,	4,	12),
+	GROUP(uart_cts_a,	4,	11),
+	GROUP(uart_rts_a,	4,	10),
+
+	/* Bank Y */
+	GROUP(uart_cts_c,	1,	19),
+	GROUP(uart_rts_c,	1,	18),
+	GROUP(uart_tx_c,	1,	17),
+	GROUP(uart_rx_c,	1,	16),
+
+	/* Bank DV */
+	GROUP(uart_tx_b,	2,	29),
+	GROUP(uart_rx_b,	2,	28),
+	GROUP(uart_cts_b,	2,	27),
+	GROUP(uart_rts_b,	2,	26),
+
 	/* Bank BOOT */
 	GROUP(emmc_nand_d07,	4,	30),
 	GROUP(emmc_clk,		4,	18),
@@ -416,6 +449,18 @@ static const char * const sdcard_groups[] = {
 	"sdcard_cmd", "sdcard_clk",
 };
 
+static const char * const uart_a_groups[] = {
+	"uart_tx_a", "uart_rx_a", "uart_cts_a", "uart_rts_a",
+};
+
+static const char * const uart_b_groups[] = {
+	"uart_tx_b", "uart_rx_b", "uart_cts_b", "uart_rts_b",
+};
+
+static const char * const uart_c_groups[] = {
+	"uart_tx_c", "uart_rx_c", "uart_cts_c", "uart_rts_c",
+};
+
 static const char * const gpio_aobus_groups[] = {
 	"GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3", "GPIOAO_4",
 	"GPIOAO_5", "GPIOAO_6", "GPIOAO_7", "GPIOAO_8", "GPIOAO_9",
@@ -442,6 +487,9 @@ static struct meson_pmx_func meson_gxbb_periphs_functions[] = {
 	FUNCTION(gpio_periphs),
 	FUNCTION(emmc),
 	FUNCTION(sdcard),
+	FUNCTION(uart_a),
+	FUNCTION(uart_b),
+	FUNCTION(uart_c),
 };
 
 static struct meson_pmx_func meson_gxbb_aobus_functions[] = {
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 27+ messages in thread
* [PATCH v2 4/4] pinctrl: amlogic: gxbb: add ethernet pins
  2016-05-26 21:24 ` Kevin Hilman
  (?)
@ 2016-05-26 21:24   ` Kevin Hilman
  -1 siblings, 0 replies; 27+ messages in thread
From: Kevin Hilman @ 2016-05-26 21:24 UTC (permalink / raw)
  To: Linus Walleij, linux-gpio
  Cc: linux-amlogic, linux-arm-kernel, Carlo Caione, Victor Wan,
	Jerry Cao, Xing Wu

Add EE domain pins for ethernet interface.

Acked-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
---
 drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 39 ++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index b2ec5f8ada33..cb4d6ad30530 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -178,6 +178,21 @@ static const unsigned int uart_rx_c_pins[]	= { PIN(GPIOY_14, EE_OFF) };
 static const unsigned int uart_cts_c_pins[]	= { PIN(GPIOX_11, EE_OFF) };
 static const unsigned int uart_rts_c_pins[]	= { PIN(GPIOX_12, EE_OFF) };
 
+static const unsigned int eth_mdio_pins[]	= { PIN(GPIOZ_0, EE_OFF) };
+static const unsigned int eth_mdc_pins[]	= { PIN(GPIOZ_1, EE_OFF) };
+static const unsigned int eth_clk_rx_clk_pins[]	= { PIN(GPIOZ_2, EE_OFF) };
+static const unsigned int eth_rx_dv_pins[]	= { PIN(GPIOZ_3, EE_OFF) };
+static const unsigned int eth_rxd0_pins[]	= { PIN(GPIOZ_4, EE_OFF) };
+static const unsigned int eth_rxd1_pins[]	= { PIN(GPIOZ_5, EE_OFF) };
+static const unsigned int eth_rxd2_pins[]	= { PIN(GPIOZ_6, EE_OFF) };
+static const unsigned int eth_rxd3_pins[]	= { PIN(GPIOZ_7, EE_OFF) };
+static const unsigned int eth_rgmii_tx_clk_pins[] = { PIN(GPIOZ_8, EE_OFF) };
+static const unsigned int eth_tx_en_pins[]	= { PIN(GPIOZ_9, EE_OFF) };
+static const unsigned int eth_txd0_pins[]	= { PIN(GPIOZ_10, EE_OFF) };
+static const unsigned int eth_txd1_pins[]	= { PIN(GPIOZ_11, EE_OFF) };
+static const unsigned int eth_txd2_pins[]	= { PIN(GPIOZ_12, EE_OFF) };
+static const unsigned int eth_txd3_pins[]	= { PIN(GPIOZ_13, EE_OFF) };
+
 static const struct pinctrl_pin_desc meson_gxbb_aobus_pins[] = {
 	MESON_PIN(GPIOAO_0, 0),
 	MESON_PIN(GPIOAO_1, 0),
@@ -351,6 +366,22 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
 	GROUP(uart_tx_c,	1,	17),
 	GROUP(uart_rx_c,	1,	16),
 
+	/* Bank Z */
+	GROUP(eth_mdio,		6,	1),
+	GROUP(eth_mdc,		6,	0),
+	GROUP(eth_clk_rx_clk,	6,	13),
+	GROUP(eth_rx_dv,	6,	12),
+	GROUP(eth_rxd0,		6,	11),
+	GROUP(eth_rxd1,		6,	10),
+	GROUP(eth_rxd2,		6,	9),
+	GROUP(eth_rxd3,		6,	8),
+	GROUP(eth_rgmii_tx_clk,	6,	7),
+	GROUP(eth_tx_en,	6,	6),
+	GROUP(eth_txd0,		6,	5),
+	GROUP(eth_txd1,		6,	4),
+	GROUP(eth_txd2,		6,	3),
+	GROUP(eth_txd3,		6,	2),
+
 	/* Bank DV */
 	GROUP(uart_tx_b,	2,	29),
 	GROUP(uart_rx_b,	2,	28),
@@ -461,6 +492,13 @@ static const char * const uart_c_groups[] = {
 	"uart_tx_c", "uart_rx_c", "uart_cts_c", "uart_rts_c",
 };
 
+static const char * const eth_groups[] = {
+	"eth_mdio", "eth_mdc", "eth_clk_rx_clk", "eth_rx_dv",
+	"eth_rxd0", "eth_rxd1", "eth_rxd2", "eth_rxd3",
+	"eth_rgmii_tx_clk", "eth_tx_en",
+	"eth_txd0", "eth_txd1", "eth_txd2", "eth_txd3",
+};
+
 static const char * const gpio_aobus_groups[] = {
 	"GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3", "GPIOAO_4",
 	"GPIOAO_5", "GPIOAO_6", "GPIOAO_7", "GPIOAO_8", "GPIOAO_9",
@@ -490,6 +528,7 @@ static struct meson_pmx_func meson_gxbb_periphs_functions[] = {
 	FUNCTION(uart_a),
 	FUNCTION(uart_b),
 	FUNCTION(uart_c),
+	FUNCTION(eth),
 };
 
 static struct meson_pmx_func meson_gxbb_aobus_functions[] = {
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 27+ messages in thread
* [PATCH v2 4/4] pinctrl: amlogic: gxbb: add ethernet pins
@ 2016-05-26 21:24   ` Kevin Hilman
  0 siblings, 0 replies; 27+ messages in thread
From: Kevin Hilman @ 2016-05-26 21:24 UTC (permalink / raw)
  To: linux-arm-kernel

Add EE domain pins for ethernet interface.

Acked-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
---
 drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 39 ++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index b2ec5f8ada33..cb4d6ad30530 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -178,6 +178,21 @@ static const unsigned int uart_rx_c_pins[]	= { PIN(GPIOY_14, EE_OFF) };
 static const unsigned int uart_cts_c_pins[]	= { PIN(GPIOX_11, EE_OFF) };
 static const unsigned int uart_rts_c_pins[]	= { PIN(GPIOX_12, EE_OFF) };
 
+static const unsigned int eth_mdio_pins[]	= { PIN(GPIOZ_0, EE_OFF) };
+static const unsigned int eth_mdc_pins[]	= { PIN(GPIOZ_1, EE_OFF) };
+static const unsigned int eth_clk_rx_clk_pins[]	= { PIN(GPIOZ_2, EE_OFF) };
+static const unsigned int eth_rx_dv_pins[]	= { PIN(GPIOZ_3, EE_OFF) };
+static const unsigned int eth_rxd0_pins[]	= { PIN(GPIOZ_4, EE_OFF) };
+static const unsigned int eth_rxd1_pins[]	= { PIN(GPIOZ_5, EE_OFF) };
+static const unsigned int eth_rxd2_pins[]	= { PIN(GPIOZ_6, EE_OFF) };
+static const unsigned int eth_rxd3_pins[]	= { PIN(GPIOZ_7, EE_OFF) };
+static const unsigned int eth_rgmii_tx_clk_pins[] = { PIN(GPIOZ_8, EE_OFF) };
+static const unsigned int eth_tx_en_pins[]	= { PIN(GPIOZ_9, EE_OFF) };
+static const unsigned int eth_txd0_pins[]	= { PIN(GPIOZ_10, EE_OFF) };
+static const unsigned int eth_txd1_pins[]	= { PIN(GPIOZ_11, EE_OFF) };
+static const unsigned int eth_txd2_pins[]	= { PIN(GPIOZ_12, EE_OFF) };
+static const unsigned int eth_txd3_pins[]	= { PIN(GPIOZ_13, EE_OFF) };
+
 static const struct pinctrl_pin_desc meson_gxbb_aobus_pins[] = {
 	MESON_PIN(GPIOAO_0, 0),
 	MESON_PIN(GPIOAO_1, 0),
@@ -351,6 +366,22 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
 	GROUP(uart_tx_c,	1,	17),
 	GROUP(uart_rx_c,	1,	16),
 
+	/* Bank Z */
+	GROUP(eth_mdio,		6,	1),
+	GROUP(eth_mdc,		6,	0),
+	GROUP(eth_clk_rx_clk,	6,	13),
+	GROUP(eth_rx_dv,	6,	12),
+	GROUP(eth_rxd0,		6,	11),
+	GROUP(eth_rxd1,		6,	10),
+	GROUP(eth_rxd2,		6,	9),
+	GROUP(eth_rxd3,		6,	8),
+	GROUP(eth_rgmii_tx_clk,	6,	7),
+	GROUP(eth_tx_en,	6,	6),
+	GROUP(eth_txd0,		6,	5),
+	GROUP(eth_txd1,		6,	4),
+	GROUP(eth_txd2,		6,	3),
+	GROUP(eth_txd3,		6,	2),
+
 	/* Bank DV */
 	GROUP(uart_tx_b,	2,	29),
 	GROUP(uart_rx_b,	2,	28),
@@ -461,6 +492,13 @@ static const char * const uart_c_groups[] = {
 	"uart_tx_c", "uart_rx_c", "uart_cts_c", "uart_rts_c",
 };
 
+static const char * const eth_groups[] = {
+	"eth_mdio", "eth_mdc", "eth_clk_rx_clk", "eth_rx_dv",
+	"eth_rxd0", "eth_rxd1", "eth_rxd2", "eth_rxd3",
+	"eth_rgmii_tx_clk", "eth_tx_en",
+	"eth_txd0", "eth_txd1", "eth_txd2", "eth_txd3",
+};
+
 static const char * const gpio_aobus_groups[] = {
 	"GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3", "GPIOAO_4",
 	"GPIOAO_5", "GPIOAO_6", "GPIOAO_7", "GPIOAO_8", "GPIOAO_9",
@@ -490,6 +528,7 @@ static struct meson_pmx_func meson_gxbb_periphs_functions[] = {
 	FUNCTION(uart_a),
 	FUNCTION(uart_b),
 	FUNCTION(uart_c),
+	FUNCTION(eth),
 };
 
 static struct meson_pmx_func meson_gxbb_aobus_functions[] = {
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 27+ messages in thread
* [PATCH v2 4/4] pinctrl: amlogic: gxbb: add ethernet pins
@ 2016-05-26 21:24   ` Kevin Hilman
  0 siblings, 0 replies; 27+ messages in thread
From: Kevin Hilman @ 2016-05-26 21:24 UTC (permalink / raw)
  To: linus-amlogic

Add EE domain pins for ethernet interface.

Acked-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
---
 drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 39 ++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index b2ec5f8ada33..cb4d6ad30530 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -178,6 +178,21 @@ static const unsigned int uart_rx_c_pins[]	= { PIN(GPIOY_14, EE_OFF) };
 static const unsigned int uart_cts_c_pins[]	= { PIN(GPIOX_11, EE_OFF) };
 static const unsigned int uart_rts_c_pins[]	= { PIN(GPIOX_12, EE_OFF) };
 
+static const unsigned int eth_mdio_pins[]	= { PIN(GPIOZ_0, EE_OFF) };
+static const unsigned int eth_mdc_pins[]	= { PIN(GPIOZ_1, EE_OFF) };
+static const unsigned int eth_clk_rx_clk_pins[]	= { PIN(GPIOZ_2, EE_OFF) };
+static const unsigned int eth_rx_dv_pins[]	= { PIN(GPIOZ_3, EE_OFF) };
+static const unsigned int eth_rxd0_pins[]	= { PIN(GPIOZ_4, EE_OFF) };
+static const unsigned int eth_rxd1_pins[]	= { PIN(GPIOZ_5, EE_OFF) };
+static const unsigned int eth_rxd2_pins[]	= { PIN(GPIOZ_6, EE_OFF) };
+static const unsigned int eth_rxd3_pins[]	= { PIN(GPIOZ_7, EE_OFF) };
+static const unsigned int eth_rgmii_tx_clk_pins[] = { PIN(GPIOZ_8, EE_OFF) };
+static const unsigned int eth_tx_en_pins[]	= { PIN(GPIOZ_9, EE_OFF) };
+static const unsigned int eth_txd0_pins[]	= { PIN(GPIOZ_10, EE_OFF) };
+static const unsigned int eth_txd1_pins[]	= { PIN(GPIOZ_11, EE_OFF) };
+static const unsigned int eth_txd2_pins[]	= { PIN(GPIOZ_12, EE_OFF) };
+static const unsigned int eth_txd3_pins[]	= { PIN(GPIOZ_13, EE_OFF) };
+
 static const struct pinctrl_pin_desc meson_gxbb_aobus_pins[] = {
 	MESON_PIN(GPIOAO_0, 0),
 	MESON_PIN(GPIOAO_1, 0),
@@ -351,6 +366,22 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
 	GROUP(uart_tx_c,	1,	17),
 	GROUP(uart_rx_c,	1,	16),
 
+	/* Bank Z */
+	GROUP(eth_mdio,		6,	1),
+	GROUP(eth_mdc,		6,	0),
+	GROUP(eth_clk_rx_clk,	6,	13),
+	GROUP(eth_rx_dv,	6,	12),
+	GROUP(eth_rxd0,		6,	11),
+	GROUP(eth_rxd1,		6,	10),
+	GROUP(eth_rxd2,		6,	9),
+	GROUP(eth_rxd3,		6,	8),
+	GROUP(eth_rgmii_tx_clk,	6,	7),
+	GROUP(eth_tx_en,	6,	6),
+	GROUP(eth_txd0,		6,	5),
+	GROUP(eth_txd1,		6,	4),
+	GROUP(eth_txd2,		6,	3),
+	GROUP(eth_txd3,		6,	2),
+
 	/* Bank DV */
 	GROUP(uart_tx_b,	2,	29),
 	GROUP(uart_rx_b,	2,	28),
@@ -461,6 +492,13 @@ static const char * const uart_c_groups[] = {
 	"uart_tx_c", "uart_rx_c", "uart_cts_c", "uart_rts_c",
 };
 
+static const char * const eth_groups[] = {
+	"eth_mdio", "eth_mdc", "eth_clk_rx_clk", "eth_rx_dv",
+	"eth_rxd0", "eth_rxd1", "eth_rxd2", "eth_rxd3",
+	"eth_rgmii_tx_clk", "eth_tx_en",
+	"eth_txd0", "eth_txd1", "eth_txd2", "eth_txd3",
+};
+
 static const char * const gpio_aobus_groups[] = {
 	"GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3", "GPIOAO_4",
 	"GPIOAO_5", "GPIOAO_6", "GPIOAO_7", "GPIOAO_8", "GPIOAO_9",
@@ -490,6 +528,7 @@ static struct meson_pmx_func meson_gxbb_periphs_functions[] = {
 	FUNCTION(uart_a),
 	FUNCTION(uart_b),
 	FUNCTION(uart_c),
+	FUNCTION(eth),
 };
 
 static struct meson_pmx_func meson_gxbb_aobus_functions[] = {
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 27+ messages in thread
* Re: [PATCH v2 1/4] pinctrl: amlogic: gxbb: add UART_AO_B, I2C
  2016-05-26 21:24   ` Kevin Hilman
  (?)
@ 2016-05-31  8:35     ` Linus Walleij
  -1 siblings, 0 replies; 27+ messages in thread
From: Linus Walleij @ 2016-05-31  8:35 UTC (permalink / raw)
  To: Kevin Hilman
  Cc: linux-gpio, linux-amlogic, linux-arm-kernel, Carlo Caione,
	Victor Wan, Jerry Cao, Xing Wu

On Thu, May 26, 2016 at 11:24 PM, Kevin Hilman <khilman@baylibre.com> wrote:

> Add pins for some more AO domain devices: UART_AO_B and I2C master &
> slave.
>
> Acked-by: Carlo Caione <carlo@endlessm.com>
> Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Patch applied.

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 27+ messages in thread
* [PATCH v2 1/4] pinctrl: amlogic: gxbb: add UART_AO_B, I2C
@ 2016-05-31  8:35     ` Linus Walleij
  0 siblings, 0 replies; 27+ messages in thread
From: Linus Walleij @ 2016-05-31  8:35 UTC (permalink / raw)
  To: linux-arm-kernel

On Thu, May 26, 2016 at 11:24 PM, Kevin Hilman <khilman@baylibre.com> wrote:

> Add pins for some more AO domain devices: UART_AO_B and I2C master &
> slave.
>
> Acked-by: Carlo Caione <carlo@endlessm.com>
> Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Patch applied.

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 27+ messages in thread
* [PATCH v2 1/4] pinctrl: amlogic: gxbb: add UART_AO_B, I2C
@ 2016-05-31  8:35     ` Linus Walleij
  0 siblings, 0 replies; 27+ messages in thread
From: Linus Walleij @ 2016-05-31  8:35 UTC (permalink / raw)
  To: linus-amlogic

On Thu, May 26, 2016 at 11:24 PM, Kevin Hilman <khilman@baylibre.com> wrote:

> Add pins for some more AO domain devices: UART_AO_B and I2C master &
> slave.
>
> Acked-by: Carlo Caione <carlo@endlessm.com>
> Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Patch applied.

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 27+ messages in thread
* Re: [PATCH v2 2/4] pinctrl: amlogic: gxbb: add EMMC and SD pins
  2016-05-26 21:24   ` Kevin Hilman
  (?)
@ 2016-05-31  8:35     ` Linus Walleij
  -1 siblings, 0 replies; 27+ messages in thread
From: Linus Walleij @ 2016-05-31  8:35 UTC (permalink / raw)
  To: Kevin Hilman
  Cc: linux-gpio, linux-amlogic, linux-arm-kernel, Carlo Caione,
	Victor Wan, Jerry Cao, Xing Wu

On Thu, May 26, 2016 at 11:24 PM, Kevin Hilman <khilman@baylibre.com> wrote:

> Add EE domain pins for eMMC and SD card.
>
> Acked-by: Carlo Caione <carlo@endlessm.com>
> Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Patch applied.

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 27+ messages in thread
* [PATCH v2 2/4] pinctrl: amlogic: gxbb: add EMMC and SD pins
@ 2016-05-31  8:35     ` Linus Walleij
  0 siblings, 0 replies; 27+ messages in thread
From: Linus Walleij @ 2016-05-31  8:35 UTC (permalink / raw)
  To: linux-arm-kernel

On Thu, May 26, 2016 at 11:24 PM, Kevin Hilman <khilman@baylibre.com> wrote:

> Add EE domain pins for eMMC and SD card.
>
> Acked-by: Carlo Caione <carlo@endlessm.com>
> Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Patch applied.

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 27+ messages in thread
* [PATCH v2 2/4] pinctrl: amlogic: gxbb: add EMMC and SD pins
@ 2016-05-31  8:35     ` Linus Walleij
  0 siblings, 0 replies; 27+ messages in thread
From: Linus Walleij @ 2016-05-31  8:35 UTC (permalink / raw)
  To: linus-amlogic

On Thu, May 26, 2016 at 11:24 PM, Kevin Hilman <khilman@baylibre.com> wrote:

> Add EE domain pins for eMMC and SD card.
>
> Acked-by: Carlo Caione <carlo@endlessm.com>
> Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Patch applied.

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 27+ messages in thread
* Re: [PATCH v2 3/4] pinctrl: amlogic: gxbb: add more UART pins
  2016-05-26 21:24   ` Kevin Hilman
  (?)
@ 2016-05-31  8:36     ` Linus Walleij
  -1 siblings, 0 replies; 27+ messages in thread
From: Linus Walleij @ 2016-05-31  8:36 UTC (permalink / raw)
  To: Kevin Hilman
  Cc: linux-gpio, linux-amlogic, linux-arm-kernel, Carlo Caione,
	Victor Wan, Jerry Cao, Xing Wu

On Thu, May 26, 2016 at 11:24 PM, Kevin Hilman <khilman@baylibre.com> wrote:

> Add EE domain pins for UART A, B & C.
>
> Acked-by: Carlo Caione <carlo@endlessm.com>
> Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Patch applied.

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 27+ messages in thread
* [PATCH v2 3/4] pinctrl: amlogic: gxbb: add more UART pins
@ 2016-05-31  8:36     ` Linus Walleij
  0 siblings, 0 replies; 27+ messages in thread
From: Linus Walleij @ 2016-05-31  8:36 UTC (permalink / raw)
  To: linux-arm-kernel

On Thu, May 26, 2016 at 11:24 PM, Kevin Hilman <khilman@baylibre.com> wrote:

> Add EE domain pins for UART A, B & C.
>
> Acked-by: Carlo Caione <carlo@endlessm.com>
> Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Patch applied.

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 27+ messages in thread
* [PATCH v2 3/4] pinctrl: amlogic: gxbb: add more UART pins
@ 2016-05-31  8:36     ` Linus Walleij
  0 siblings, 0 replies; 27+ messages in thread
From: Linus Walleij @ 2016-05-31  8:36 UTC (permalink / raw)
  To: linus-amlogic

On Thu, May 26, 2016 at 11:24 PM, Kevin Hilman <khilman@baylibre.com> wrote:

> Add EE domain pins for UART A, B & C.
>
> Acked-by: Carlo Caione <carlo@endlessm.com>
> Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Patch applied.

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 27+ messages in thread
* Re: [PATCH v2 4/4] pinctrl: amlogic: gxbb: add ethernet pins
  2016-05-26 21:24   ` Kevin Hilman
  (?)
@ 2016-05-31  8:37     ` Linus Walleij
  -1 siblings, 0 replies; 27+ messages in thread
From: Linus Walleij @ 2016-05-31  8:37 UTC (permalink / raw)
  To: Kevin Hilman
  Cc: linux-gpio, linux-amlogic, linux-arm-kernel, Carlo Caione,
	Victor Wan, Jerry Cao, Xing Wu

On Thu, May 26, 2016 at 11:24 PM, Kevin Hilman <khilman@baylibre.com> wrote:

> Add EE domain pins for ethernet interface.
>
> Acked-by: Carlo Caione <carlo@endlessm.com>
> Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Patch applied.

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 27+ messages in thread
* [PATCH v2 4/4] pinctrl: amlogic: gxbb: add ethernet pins
@ 2016-05-31  8:37     ` Linus Walleij
  0 siblings, 0 replies; 27+ messages in thread
From: Linus Walleij @ 2016-05-31  8:37 UTC (permalink / raw)
  To: linux-arm-kernel

On Thu, May 26, 2016 at 11:24 PM, Kevin Hilman <khilman@baylibre.com> wrote:

> Add EE domain pins for ethernet interface.
>
> Acked-by: Carlo Caione <carlo@endlessm.com>
> Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Patch applied.

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 27+ messages in thread
* [PATCH v2 4/4] pinctrl: amlogic: gxbb: add ethernet pins
@ 2016-05-31  8:37     ` Linus Walleij
  0 siblings, 0 replies; 27+ messages in thread
From: Linus Walleij @ 2016-05-31  8:37 UTC (permalink / raw)
  To: linus-amlogic

On Thu, May 26, 2016 at 11:24 PM, Kevin Hilman <khilman@baylibre.com> wrote:

> Add EE domain pins for ethernet interface.
>
> Acked-by: Carlo Caione <carlo@endlessm.com>
> Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Patch applied.

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 27+ messages in thread
end of thread, other threads:[~2016-05-31  8:37 UTC | newest]

Thread overview: 27+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-05-26 21:24 [PATCH v2 0/4] pinctrl: meson-gxbb: add a bunch more pins Kevin Hilman
2016-05-26 21:24 ` Kevin Hilman
2016-05-26 21:24 ` Kevin Hilman
2016-05-26 21:24 ` [PATCH v2 1/4] pinctrl: amlogic: gxbb: add UART_AO_B, I2C Kevin Hilman
2016-05-26 21:24   ` Kevin Hilman
2016-05-26 21:24   ` Kevin Hilman
2016-05-31  8:35   ` Linus Walleij
2016-05-31  8:35     ` Linus Walleij
2016-05-31  8:35     ` Linus Walleij
2016-05-26 21:24 ` [PATCH v2 2/4] pinctrl: amlogic: gxbb: add EMMC and SD pins Kevin Hilman
2016-05-26 21:24   ` Kevin Hilman
2016-05-26 21:24   ` Kevin Hilman
2016-05-31  8:35   ` Linus Walleij
2016-05-31  8:35     ` Linus Walleij
2016-05-31  8:35     ` Linus Walleij
2016-05-26 21:24 ` [PATCH v2 3/4] pinctrl: amlogic: gxbb: add more UART pins Kevin Hilman
2016-05-26 21:24   ` Kevin Hilman
2016-05-26 21:24   ` Kevin Hilman
2016-05-31  8:36   ` Linus Walleij
2016-05-31  8:36     ` Linus Walleij
2016-05-31  8:36     ` Linus Walleij
2016-05-26 21:24 ` [PATCH v2 4/4] pinctrl: amlogic: gxbb: add ethernet pins Kevin Hilman
2016-05-26 21:24   ` Kevin Hilman
2016-05-26 21:24   ` Kevin Hilman
2016-05-31  8:37   ` Linus Walleij
2016-05-31  8:37     ` Linus Walleij
2016-05-31  8:37     ` Linus Walleij

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.