* [PATCH] gpio: (gpio-pca953x) move header to linux/platform_data/
@ 2013-07-31 20:57 ` Vivien Didelot
0 siblings, 0 replies; 22+ messages in thread
From: Vivien Didelot @ 2013-07-31 20:57 UTC (permalink / raw)
To: linux-gpio
Cc: Vivien Didelot, Linus Walleij, linux-arm-kernel, linux-kernel, kernel
This patch moves the pca953x.h header from include/linux/i2c to
include/linux/platform_data and updates existing support accordingly.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
---
arch/arm/mach-at91/board-snapper9260.c | 2 +-
arch/arm/mach-davinci/board-da850-evm.c | 2 +-
arch/arm/mach-ep93xx/vision_ep9307.c | 2 +-
arch/arm/mach-imx/mach-imx27_visstrim_m10.c | 2 +-
arch/arm/mach-imx/mach-mxt_td60.c | 2 +-
arch/arm/mach-ks8695/board-acs5k.c | 2 +-
arch/arm/mach-mmp/ttc_dkb.c | 2 +-
arch/arm/mach-omap2/board-am3517evm.c | 2 +-
arch/arm/mach-pxa/cm-x300.c | 2 +-
arch/arm/mach-pxa/em-x270.c | 2 +-
arch/arm/mach-pxa/pcm990-baseboard.c | 2 +-
arch/arm/mach-pxa/spitz.c | 2 +-
arch/arm/mach-pxa/zeus.c | 2 +-
arch/arm/mach-pxa/zylonite_pxa300.c | 2 +-
arch/arm/mach-s3c64xx/mach-crag6410.c | 2 +-
arch/x86/platform/mrst/mrst.c | 2 +-
drivers/gpio/gpio-pca953x.c | 2 +-
include/linux/i2c/pca953x.h | 30 -----------------------------
include/linux/platform_data/pca953x.h | 30 +++++++++++++++++++++++++++++
19 files changed, 47 insertions(+), 47 deletions(-)
delete mode 100644 include/linux/i2c/pca953x.h
create mode 100644 include/linux/platform_data/pca953x.h
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index 3aaa978..f1d49e9 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -26,7 +26,7 @@
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index bea6793..af6dafb 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -19,7 +19,7 @@
#include <linux/kernel.h>
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include <linux/input.h>
#include <linux/input/tps6507x-ts.h>
#include <linux/mfd/tps6507x.h>
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index 605956f..64f2e50 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -23,7 +23,7 @@
#include <linux/mtd/partitions.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/spi/mmc_spi.h>
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 29ac8ee6..97f9c62 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -26,7 +26,7 @@
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include <linux/input.h>
#include <linux/gpio.h>
#include <linux/delay.h>
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index a27faab..c918940 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -26,7 +26,7 @@
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <linux/gpio.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include "common.h"
#include "devices-imx27.h"
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
index 456d638..9f9c044 100644
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -20,7 +20,7 @@
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include <linux/i2c-gpio.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index 8483906..7022329 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -15,7 +15,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/onenand.h>
#include <linux/interrupt.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include <linux/gpio.h>
#include <linux/gpio-pxa.h>
#include <linux/mfd/88pm860x.h>
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index d63f14b..c7196a6 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -21,7 +21,7 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include <linux/can/platform/ti_hecc.h>
#include <linux/davinci_emac.h>
#include <linux/mmc/host.h>
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 8091aac..f942349 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -29,7 +29,7 @@
#include <linux/pwm_backlight.h>
#include <linux/i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/mfd/da903x.h>
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 3a3362f..8eb4e23 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -30,7 +30,7 @@
#include <linux/power_supply.h>
#include <linux/apm-emulation.h>
#include <linux/i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/regulator/userspace-consumer.h>
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 13e5b00..3133ba8 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -408,7 +408,7 @@ struct pxacamera_platform_data pcm990_pxacamera_platform_data = {
.mclk_10khz = 1000,
};
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
static struct pca953x_platform_data pca9536_data = {
.gpio_base = PXA_NR_BUILTIN_GPIO,
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 4c29173..0b11c1a 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -20,7 +20,7 @@
#include <linux/leds.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/spi/corgi_lcd.h>
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index f5d4364..126e4a8 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -26,7 +26,7 @@
#include <linux/mtd/physmap.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include <linux/apm-emulation.h>
#include <linux/can/platform/mcp251x.h>
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 86e59c0..869bce7 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -18,7 +18,7 @@
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include <linux/gpio.h>
#include <mach/pxa300.h>
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 8ad88ac..007fc53 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -30,7 +30,7 @@
#include <linux/basic_mmio_gpio.h>
#include <linux/spi/spi.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <video/platform_lcd.h>
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
index 47fe66f..3ca5957 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/mrst/mrst.c
@@ -20,7 +20,7 @@
#include <linux/intel_pmic_gpio.h>
#include <linux/spi/spi.h>
#include <linux/i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/platform_device.h>
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index 426c51d..8804aec 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -18,7 +18,7 @@
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include <linux/slab.h>
#ifdef CONFIG_OF_GPIO
#include <linux/of_platform.h>
diff --git a/include/linux/i2c/pca953x.h b/include/linux/i2c/pca953x.h
deleted file mode 100644
index 3c98dd4..0000000
--- a/include/linux/i2c/pca953x.h
+++ /dev/null
@@ -1,30 +0,0 @@
-#ifndef _LINUX_PCA953X_H
-#define _LINUX_PCA953X_H
-
-#include <linux/types.h>
-#include <linux/i2c.h>
-
-/* platform data for the PCA9539 16-bit I/O expander driver */
-
-struct pca953x_platform_data {
- /* number of the first GPIO */
- unsigned gpio_base;
-
- /* initial polarity inversion setting */
- u32 invert;
-
- /* interrupt base */
- int irq_base;
-
- void *context; /* param to setup/teardown */
-
- int (*setup)(struct i2c_client *client,
- unsigned gpio, unsigned ngpio,
- void *context);
- int (*teardown)(struct i2c_client *client,
- unsigned gpio, unsigned ngpio,
- void *context);
- const char *const *names;
-};
-
-#endif /* _LINUX_PCA953X_H */
diff --git a/include/linux/platform_data/pca953x.h b/include/linux/platform_data/pca953x.h
new file mode 100644
index 0000000..3c98dd4
--- /dev/null
+++ b/include/linux/platform_data/pca953x.h
@@ -0,0 +1,30 @@
+#ifndef _LINUX_PCA953X_H
+#define _LINUX_PCA953X_H
+
+#include <linux/types.h>
+#include <linux/i2c.h>
+
+/* platform data for the PCA9539 16-bit I/O expander driver */
+
+struct pca953x_platform_data {
+ /* number of the first GPIO */
+ unsigned gpio_base;
+
+ /* initial polarity inversion setting */
+ u32 invert;
+
+ /* interrupt base */
+ int irq_base;
+
+ void *context; /* param to setup/teardown */
+
+ int (*setup)(struct i2c_client *client,
+ unsigned gpio, unsigned ngpio,
+ void *context);
+ int (*teardown)(struct i2c_client *client,
+ unsigned gpio, unsigned ngpio,
+ void *context);
+ const char *const *names;
+};
+
+#endif /* _LINUX_PCA953X_H */
--
1.8.3.4
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH] gpio: (gpio-pca953x) move header to linux/platform_data/
@ 2013-07-31 20:57 ` Vivien Didelot
0 siblings, 0 replies; 22+ messages in thread
From: Vivien Didelot @ 2013-07-31 20:57 UTC (permalink / raw)
To: linux-arm-kernel
This patch moves the pca953x.h header from include/linux/i2c to
include/linux/platform_data and updates existing support accordingly.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
---
arch/arm/mach-at91/board-snapper9260.c | 2 +-
arch/arm/mach-davinci/board-da850-evm.c | 2 +-
arch/arm/mach-ep93xx/vision_ep9307.c | 2 +-
arch/arm/mach-imx/mach-imx27_visstrim_m10.c | 2 +-
arch/arm/mach-imx/mach-mxt_td60.c | 2 +-
arch/arm/mach-ks8695/board-acs5k.c | 2 +-
arch/arm/mach-mmp/ttc_dkb.c | 2 +-
arch/arm/mach-omap2/board-am3517evm.c | 2 +-
arch/arm/mach-pxa/cm-x300.c | 2 +-
arch/arm/mach-pxa/em-x270.c | 2 +-
arch/arm/mach-pxa/pcm990-baseboard.c | 2 +-
arch/arm/mach-pxa/spitz.c | 2 +-
arch/arm/mach-pxa/zeus.c | 2 +-
arch/arm/mach-pxa/zylonite_pxa300.c | 2 +-
arch/arm/mach-s3c64xx/mach-crag6410.c | 2 +-
arch/x86/platform/mrst/mrst.c | 2 +-
drivers/gpio/gpio-pca953x.c | 2 +-
include/linux/i2c/pca953x.h | 30 -----------------------------
include/linux/platform_data/pca953x.h | 30 +++++++++++++++++++++++++++++
19 files changed, 47 insertions(+), 47 deletions(-)
delete mode 100644 include/linux/i2c/pca953x.h
create mode 100644 include/linux/platform_data/pca953x.h
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index 3aaa978..f1d49e9 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -26,7 +26,7 @@
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index bea6793..af6dafb 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -19,7 +19,7 @@
#include <linux/kernel.h>
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include <linux/input.h>
#include <linux/input/tps6507x-ts.h>
#include <linux/mfd/tps6507x.h>
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index 605956f..64f2e50 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -23,7 +23,7 @@
#include <linux/mtd/partitions.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/spi/mmc_spi.h>
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 29ac8ee6..97f9c62 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -26,7 +26,7 @@
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include <linux/input.h>
#include <linux/gpio.h>
#include <linux/delay.h>
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index a27faab..c918940 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -26,7 +26,7 @@
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <linux/gpio.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include "common.h"
#include "devices-imx27.h"
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
index 456d638..9f9c044 100644
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -20,7 +20,7 @@
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include <linux/i2c-gpio.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index 8483906..7022329 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -15,7 +15,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/onenand.h>
#include <linux/interrupt.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include <linux/gpio.h>
#include <linux/gpio-pxa.h>
#include <linux/mfd/88pm860x.h>
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index d63f14b..c7196a6 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -21,7 +21,7 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include <linux/can/platform/ti_hecc.h>
#include <linux/davinci_emac.h>
#include <linux/mmc/host.h>
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 8091aac..f942349 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -29,7 +29,7 @@
#include <linux/pwm_backlight.h>
#include <linux/i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/mfd/da903x.h>
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 3a3362f..8eb4e23 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -30,7 +30,7 @@
#include <linux/power_supply.h>
#include <linux/apm-emulation.h>
#include <linux/i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/regulator/userspace-consumer.h>
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 13e5b00..3133ba8 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -408,7 +408,7 @@ struct pxacamera_platform_data pcm990_pxacamera_platform_data = {
.mclk_10khz = 1000,
};
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
static struct pca953x_platform_data pca9536_data = {
.gpio_base = PXA_NR_BUILTIN_GPIO,
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 4c29173..0b11c1a 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -20,7 +20,7 @@
#include <linux/leds.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/spi/corgi_lcd.h>
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index f5d4364..126e4a8 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -26,7 +26,7 @@
#include <linux/mtd/physmap.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include <linux/apm-emulation.h>
#include <linux/can/platform/mcp251x.h>
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 86e59c0..869bce7 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -18,7 +18,7 @@
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include <linux/gpio.h>
#include <mach/pxa300.h>
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 8ad88ac..007fc53 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -30,7 +30,7 @@
#include <linux/basic_mmio_gpio.h>
#include <linux/spi/spi.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <video/platform_lcd.h>
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
index 47fe66f..3ca5957 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/mrst/mrst.c
@@ -20,7 +20,7 @@
#include <linux/intel_pmic_gpio.h>
#include <linux/spi/spi.h>
#include <linux/i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/platform_device.h>
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index 426c51d..8804aec 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -18,7 +18,7 @@
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
#include <linux/slab.h>
#ifdef CONFIG_OF_GPIO
#include <linux/of_platform.h>
diff --git a/include/linux/i2c/pca953x.h b/include/linux/i2c/pca953x.h
deleted file mode 100644
index 3c98dd4..0000000
--- a/include/linux/i2c/pca953x.h
+++ /dev/null
@@ -1,30 +0,0 @@
-#ifndef _LINUX_PCA953X_H
-#define _LINUX_PCA953X_H
-
-#include <linux/types.h>
-#include <linux/i2c.h>
-
-/* platform data for the PCA9539 16-bit I/O expander driver */
-
-struct pca953x_platform_data {
- /* number of the first GPIO */
- unsigned gpio_base;
-
- /* initial polarity inversion setting */
- u32 invert;
-
- /* interrupt base */
- int irq_base;
-
- void *context; /* param to setup/teardown */
-
- int (*setup)(struct i2c_client *client,
- unsigned gpio, unsigned ngpio,
- void *context);
- int (*teardown)(struct i2c_client *client,
- unsigned gpio, unsigned ngpio,
- void *context);
- const char *const *names;
-};
-
-#endif /* _LINUX_PCA953X_H */
diff --git a/include/linux/platform_data/pca953x.h b/include/linux/platform_data/pca953x.h
new file mode 100644
index 0000000..3c98dd4
--- /dev/null
+++ b/include/linux/platform_data/pca953x.h
@@ -0,0 +1,30 @@
+#ifndef _LINUX_PCA953X_H
+#define _LINUX_PCA953X_H
+
+#include <linux/types.h>
+#include <linux/i2c.h>
+
+/* platform data for the PCA9539 16-bit I/O expander driver */
+
+struct pca953x_platform_data {
+ /* number of the first GPIO */
+ unsigned gpio_base;
+
+ /* initial polarity inversion setting */
+ u32 invert;
+
+ /* interrupt base */
+ int irq_base;
+
+ void *context; /* param to setup/teardown */
+
+ int (*setup)(struct i2c_client *client,
+ unsigned gpio, unsigned ngpio,
+ void *context);
+ int (*teardown)(struct i2c_client *client,
+ unsigned gpio, unsigned ngpio,
+ void *context);
+ const char *const *names;
+};
+
+#endif /* _LINUX_PCA953X_H */
--
1.8.3.4
^ permalink raw reply related [flat|nested] 22+ messages in thread
* RE: [PATCH] gpio: (gpio-pca953x) move header to linux/platform_data/
2013-07-31 20:57 ` Vivien Didelot
@ 2013-07-31 21:03 ` H Hartley Sweeten
-1 siblings, 0 replies; 22+ messages in thread
From: H Hartley Sweeten @ 2013-07-31 21:03 UTC (permalink / raw)
To: Vivien Didelot, linux-gpio
Cc: Linus Walleij, kernel, linux-kernel, linux-arm-kernel
On Wednesday, July 31, 2013 1:57 PM, Vivien Didelot wrote:
>
> This patch moves the pca953x.h header from include/linux/i2c to
> include/linux/platform_data and updates existing support accordingly.
>
> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
> ---
<snip>
arch/arm/mach-ep93xx/vision_ep9307.c | 2 +-
For the ep93xx change:
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Thanks
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH] gpio: (gpio-pca953x) move header to linux/platform_data/
@ 2013-07-31 21:03 ` H Hartley Sweeten
0 siblings, 0 replies; 22+ messages in thread
From: H Hartley Sweeten @ 2013-07-31 21:03 UTC (permalink / raw)
To: linux-arm-kernel
On Wednesday, July 31, 2013 1:57 PM, Vivien Didelot wrote:
>
> This patch moves the pca953x.h header from include/linux/i2c to
> include/linux/platform_data and updates existing support accordingly.
>
> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
> ---
<snip>
arch/arm/mach-ep93xx/vision_ep9307.c | 2 +-
For the ep93xx change:
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Thanks
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] gpio: (gpio-pca953x) move header to linux/platform_data/
2013-07-31 20:57 ` Vivien Didelot
(?)
@ 2013-08-16 13:34 ` Linus Walleij
-1 siblings, 0 replies; 22+ messages in thread
From: Linus Walleij @ 2013-08-16 13:34 UTC (permalink / raw)
To: Vivien Didelot; +Cc: linux-gpio, linux-arm-kernel, linux-kernel, kernel
On Wed, Jul 31, 2013 at 10:57 PM, Vivien Didelot
<vivien.didelot@savoirfairelinux.com> wrote:
> This patch moves the pca953x.h header from include/linux/i2c to
> include/linux/platform_data and updates existing support accordingly.
>
> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
On the concept:
Acked-by: Linus Walleij <linus.walleij@linaro.org>
But:
> drivers/gpio/gpio-pca953x.c | 2 +-
(...)
> diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
> index 426c51d..8804aec 100644
> --- a/drivers/gpio/gpio-pca953x.c
> +++ b/drivers/gpio/gpio-pca953x.c
> @@ -18,7 +18,7 @@
> #include <linux/irq.h>
> #include <linux/irqdomain.h>
> #include <linux/i2c.h>
> -#include <linux/i2c/pca953x.h>
> +#include <linux/platform_data/pca953x.h>
Why does the GPIO driver need platform data from the
I2C driver???
Can't this just be made to go away?
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] gpio: (gpio-pca953x) move header to linux/platform_data/
@ 2013-08-16 13:34 ` Linus Walleij
0 siblings, 0 replies; 22+ messages in thread
From: Linus Walleij @ 2013-08-16 13:34 UTC (permalink / raw)
To: Vivien Didelot; +Cc: linux-gpio, linux-arm-kernel, linux-kernel, kernel
On Wed, Jul 31, 2013 at 10:57 PM, Vivien Didelot
<vivien.didelot@savoirfairelinux.com> wrote:
> This patch moves the pca953x.h header from include/linux/i2c to
> include/linux/platform_data and updates existing support accordingly.
>
> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
On the concept:
Acked-by: Linus Walleij <linus.walleij@linaro.org>
But:
> drivers/gpio/gpio-pca953x.c | 2 +-
(...)
> diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
> index 426c51d..8804aec 100644
> --- a/drivers/gpio/gpio-pca953x.c
> +++ b/drivers/gpio/gpio-pca953x.c
> @@ -18,7 +18,7 @@
> #include <linux/irq.h>
> #include <linux/irqdomain.h>
> #include <linux/i2c.h>
> -#include <linux/i2c/pca953x.h>
> +#include <linux/platform_data/pca953x.h>
Why does the GPIO driver need platform data from the
I2C driver???
Can't this just be made to go away?
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH] gpio: (gpio-pca953x) move header to linux/platform_data/
@ 2013-08-16 13:34 ` Linus Walleij
0 siblings, 0 replies; 22+ messages in thread
From: Linus Walleij @ 2013-08-16 13:34 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jul 31, 2013 at 10:57 PM, Vivien Didelot
<vivien.didelot@savoirfairelinux.com> wrote:
> This patch moves the pca953x.h header from include/linux/i2c to
> include/linux/platform_data and updates existing support accordingly.
>
> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
On the concept:
Acked-by: Linus Walleij <linus.walleij@linaro.org>
But:
> drivers/gpio/gpio-pca953x.c | 2 +-
(...)
> diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
> index 426c51d..8804aec 100644
> --- a/drivers/gpio/gpio-pca953x.c
> +++ b/drivers/gpio/gpio-pca953x.c
> @@ -18,7 +18,7 @@
> #include <linux/irq.h>
> #include <linux/irqdomain.h>
> #include <linux/i2c.h>
> -#include <linux/i2c/pca953x.h>
> +#include <linux/platform_data/pca953x.h>
Why does the GPIO driver need platform data from the
I2C driver???
Can't this just be made to go away?
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] gpio: (gpio-pca953x) move header to linux/platform_data/
2013-08-16 13:34 ` Linus Walleij
@ 2013-08-16 15:02 ` Vivien Didelot
-1 siblings, 0 replies; 22+ messages in thread
From: Vivien Didelot @ 2013-08-16 15:02 UTC (permalink / raw)
To: Linus Walleij; +Cc: linux-gpio, linux-arm-kernel, linux-kernel, kernel
Hi Linus,
You wrote:
> But:
>
> > drivers/gpio/gpio-pca953x.c | 2 +-
> (...)
> > diff --git a/drivers/gpio/gpio-pca953x.c
> > b/drivers/gpio/gpio-pca953x.c
> > index 426c51d..8804aec 100644
> > --- a/drivers/gpio/gpio-pca953x.c
> > +++ b/drivers/gpio/gpio-pca953x.c
> > @@ -18,7 +18,7 @@
> > #include <linux/irq.h>
> > #include <linux/irqdomain.h>
> > #include <linux/i2c.h>
> > -#include <linux/i2c/pca953x.h>
> > +#include <linux/platform_data/pca953x.h>
>
> Why does the GPIO driver need platform data from the
> I2C driver???
>
> Can't this just be made to go away?
I didn't dig that much in the driver, but I cannot imagine
another way to pass, for instance, the setup callback.
What would be a good alternative for you?
Regards,
Vivien
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH] gpio: (gpio-pca953x) move header to linux/platform_data/
@ 2013-08-16 15:02 ` Vivien Didelot
0 siblings, 0 replies; 22+ messages in thread
From: Vivien Didelot @ 2013-08-16 15:02 UTC (permalink / raw)
To: linux-arm-kernel
Hi Linus,
You wrote:
> But:
>
> > drivers/gpio/gpio-pca953x.c | 2 +-
> (...)
> > diff --git a/drivers/gpio/gpio-pca953x.c
> > b/drivers/gpio/gpio-pca953x.c
> > index 426c51d..8804aec 100644
> > --- a/drivers/gpio/gpio-pca953x.c
> > +++ b/drivers/gpio/gpio-pca953x.c
> > @@ -18,7 +18,7 @@
> > #include <linux/irq.h>
> > #include <linux/irqdomain.h>
> > #include <linux/i2c.h>
> > -#include <linux/i2c/pca953x.h>
> > +#include <linux/platform_data/pca953x.h>
>
> Why does the GPIO driver need platform data from the
> I2C driver???
>
> Can't this just be made to go away?
I didn't dig that much in the driver, but I cannot imagine
another way to pass, for instance, the setup callback.
What would be a good alternative for you?
Regards,
Vivien
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] gpio: (gpio-pca953x) move header to linux/platform_data/
2013-08-16 15:02 ` Vivien Didelot
(?)
@ 2013-08-16 15:42 ` Linus Walleij
-1 siblings, 0 replies; 22+ messages in thread
From: Linus Walleij @ 2013-08-16 15:42 UTC (permalink / raw)
To: Vivien Didelot; +Cc: linux-gpio, linux-arm-kernel, linux-kernel, kernel
On Fri, Aug 16, 2013 at 5:02 PM, Vivien Didelot
<vivien.didelot@savoirfairelinux.com> wrote:
>> Why does the GPIO driver need platform data from the
>> I2C driver???
>>
>> Can't this just be made to go away?
>
> I didn't dig that much in the driver, but I cannot imagine
> another way to pass, for instance, the setup callback.
Hm so this is some combined platform data for I2C *and* GPIO?
Hmm ugly, but OK then.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] gpio: (gpio-pca953x) move header to linux/platform_data/
@ 2013-08-16 15:42 ` Linus Walleij
0 siblings, 0 replies; 22+ messages in thread
From: Linus Walleij @ 2013-08-16 15:42 UTC (permalink / raw)
To: Vivien Didelot; +Cc: linux-gpio, linux-arm-kernel, linux-kernel, kernel
On Fri, Aug 16, 2013 at 5:02 PM, Vivien Didelot
<vivien.didelot@savoirfairelinux.com> wrote:
>> Why does the GPIO driver need platform data from the
>> I2C driver???
>>
>> Can't this just be made to go away?
>
> I didn't dig that much in the driver, but I cannot imagine
> another way to pass, for instance, the setup callback.
Hm so this is some combined platform data for I2C *and* GPIO?
Hmm ugly, but OK then.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH] gpio: (gpio-pca953x) move header to linux/platform_data/
@ 2013-08-16 15:42 ` Linus Walleij
0 siblings, 0 replies; 22+ messages in thread
From: Linus Walleij @ 2013-08-16 15:42 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Aug 16, 2013 at 5:02 PM, Vivien Didelot
<vivien.didelot@savoirfairelinux.com> wrote:
>> Why does the GPIO driver need platform data from the
>> I2C driver???
>>
>> Can't this just be made to go away?
>
> I didn't dig that much in the driver, but I cannot imagine
> another way to pass, for instance, the setup callback.
Hm so this is some combined platform data for I2C *and* GPIO?
Hmm ugly, but OK then.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 22+ messages in thread
* RE: [PATCH] gpio: (gpio-pca953x) move header to linux/platform_data/
2013-08-16 15:02 ` Vivien Didelot
(?)
@ 2013-08-16 19:06 ` H Hartley Sweeten
-1 siblings, 0 replies; 22+ messages in thread
From: H Hartley Sweeten @ 2013-08-16 19:06 UTC (permalink / raw)
To: Vivien Didelot, Linus Walleij
Cc: linux-gpio, kernel, linux-kernel, linux-arm-kernel
On Friday, August 16, 2013 8:02 AM, Vivien Didelot wrote:
> Hi Linus,
>
> You wrote:
> > But:
>>
>>> drivers/gpio/gpio-pca953x.c | 2 +-
>> (...)
>>> diff --git a/drivers/gpio/gpio-pca953x.c
>>> b/drivers/gpio/gpio-pca953x.c
>>> index 426c51d..8804aec 100644
>>> --- a/drivers/gpio/gpio-pca953x.c
>>> +++ b/drivers/gpio/gpio-pca953x.c
>>> @@ -18,7 +18,7 @@
>>> #include <linux/irq.h>
>>> #include <linux/irqdomain.h>
>>> #include <linux/i2c.h>
>>> -#include <linux/i2c/pca953x.h>
>>> +#include <linux/platform_data/pca953x.h>
>>
>> Why does the GPIO driver need platform data from the
>> I2C driver???
>>
>> Can't this just be made to go away?
>
> I didn't dig that much in the driver, but I cannot imagine
> another way to pass, for instance, the setup callback.
>
> What would be a good alternative for you?
I think the confusion here is because the pca953x.h header was initially
placed in linux/i2c.
This device is an I2C connected GPIO expander. The pca953x.h header has
the information needed for the platform to hook up to the device. It doesn't
really expose the fact that it's an I2C driver.
Just by 2 cents...
Hartley
^ permalink raw reply [flat|nested] 22+ messages in thread
* RE: [PATCH] gpio: (gpio-pca953x) move header to linux/platform_data/
@ 2013-08-16 19:06 ` H Hartley Sweeten
0 siblings, 0 replies; 22+ messages in thread
From: H Hartley Sweeten @ 2013-08-16 19:06 UTC (permalink / raw)
To: Vivien Didelot, Linus Walleij
Cc: linux-gpio, kernel, linux-kernel, linux-arm-kernel
On Friday, August 16, 2013 8:02 AM, Vivien Didelot wrote:
> Hi Linus,
>
> You wrote:
> > But:
>>
>>> drivers/gpio/gpio-pca953x.c | 2 +-
>> (...)
>>> diff --git a/drivers/gpio/gpio-pca953x.c
>>> b/drivers/gpio/gpio-pca953x.c
>>> index 426c51d..8804aec 100644
>>> --- a/drivers/gpio/gpio-pca953x.c
>>> +++ b/drivers/gpio/gpio-pca953x.c
>>> @@ -18,7 +18,7 @@
>>> #include <linux/irq.h>
>>> #include <linux/irqdomain.h>
>>> #include <linux/i2c.h>
>>> -#include <linux/i2c/pca953x.h>
>>> +#include <linux/platform_data/pca953x.h>
>>
>> Why does the GPIO driver need platform data from the
>> I2C driver???
>>
>> Can't this just be made to go away?
>
> I didn't dig that much in the driver, but I cannot imagine
> another way to pass, for instance, the setup callback.
>
> What would be a good alternative for you?
I think the confusion here is because the pca953x.h header was initially
placed in linux/i2c.
This device is an I2C connected GPIO expander. The pca953x.h header has
the information needed for the platform to hook up to the device. It doesn't
really expose the fact that it's an I2C driver.
Just by 2 cents...
Hartley
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH] gpio: (gpio-pca953x) move header to linux/platform_data/
@ 2013-08-16 19:06 ` H Hartley Sweeten
0 siblings, 0 replies; 22+ messages in thread
From: H Hartley Sweeten @ 2013-08-16 19:06 UTC (permalink / raw)
To: linux-arm-kernel
On Friday, August 16, 2013 8:02 AM, Vivien Didelot wrote:
> Hi Linus,
>
> You wrote:
> > But:
>>
>>> drivers/gpio/gpio-pca953x.c | 2 +-
>> (...)
>>> diff --git a/drivers/gpio/gpio-pca953x.c
>>> b/drivers/gpio/gpio-pca953x.c
>>> index 426c51d..8804aec 100644
>>> --- a/drivers/gpio/gpio-pca953x.c
>>> +++ b/drivers/gpio/gpio-pca953x.c
>>> @@ -18,7 +18,7 @@
>>> #include <linux/irq.h>
>>> #include <linux/irqdomain.h>
>>> #include <linux/i2c.h>
>>> -#include <linux/i2c/pca953x.h>
>>> +#include <linux/platform_data/pca953x.h>
>>
>> Why does the GPIO driver need platform data from the
>> I2C driver???
>>
>> Can't this just be made to go away?
>
> I didn't dig that much in the driver, but I cannot imagine
> another way to pass, for instance, the setup callback.
>
> What would be a good alternative for you?
I think the confusion here is because the pca953x.h header was initially
placed in linux/i2c.
This device is an I2C connected GPIO expander. The pca953x.h header has
the information needed for the platform to hook up to the device. It doesn't
really expose the fact that it's an I2C driver.
Just by 2 cents...
Hartley
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] gpio: (gpio-pca953x) move header to linux/platform_data/
2013-08-16 19:06 ` H Hartley Sweeten
@ 2013-08-29 17:52 ` Vivien Didelot
-1 siblings, 0 replies; 22+ messages in thread
From: Vivien Didelot @ 2013-08-29 17:52 UTC (permalink / raw)
To: arm, Kevin Hilman, Olof Johansson
Cc: linux-gpio, kernel, linux-kernel, linux-arm-kernel,
Linus Walleij, H Hartley Sweeten
As this patch mainly touches arch/arm/*, Olof/Kevin, would you mind
applying it?
The first message in thread is here: https://lkml.org/lkml/2013/7/31/552
Here are the previous ACKs:
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Regards,
Vivien
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH] gpio: (gpio-pca953x) move header to linux/platform_data/
@ 2013-08-29 17:52 ` Vivien Didelot
0 siblings, 0 replies; 22+ messages in thread
From: Vivien Didelot @ 2013-08-29 17:52 UTC (permalink / raw)
To: linux-arm-kernel
As this patch mainly touches arch/arm/*, Olof/Kevin, would you mind
applying it?
The first message in thread is here: https://lkml.org/lkml/2013/7/31/552
Here are the previous ACKs:
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Regards,
Vivien
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] gpio: (gpio-pca953x) move header to linux/platform_data/
2013-08-29 17:52 ` Vivien Didelot
@ 2013-08-29 18:00 ` Olof Johansson
-1 siblings, 0 replies; 22+ messages in thread
From: Olof Johansson @ 2013-08-29 18:00 UTC (permalink / raw)
To: Vivien Didelot
Cc: arm, Kevin Hilman, linux-gpio, kernel, linux-kernel,
linux-arm-kernel, Linus Walleij, H Hartley Sweeten
On Thu, Aug 29, 2013 at 01:52:58PM -0400, Vivien Didelot wrote:
> As this patch mainly touches arch/arm/*, Olof/Kevin, would you mind
> applying it?
>
> The first message in thread is here: https://lkml.org/lkml/2013/7/31/552
> Here are the previous ACKs:
>
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Looks like i2c or gpio maintainers should be taking it, but since Linus acked
it instead of applied it, I guess we can take it. :)
I'll apply it to next/cleanup for 3.12 if you resend me the patch with the
acks. Thanks!
-Olof
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH] gpio: (gpio-pca953x) move header to linux/platform_data/
@ 2013-08-29 18:00 ` Olof Johansson
0 siblings, 0 replies; 22+ messages in thread
From: Olof Johansson @ 2013-08-29 18:00 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Aug 29, 2013 at 01:52:58PM -0400, Vivien Didelot wrote:
> As this patch mainly touches arch/arm/*, Olof/Kevin, would you mind
> applying it?
>
> The first message in thread is here: https://lkml.org/lkml/2013/7/31/552
> Here are the previous ACKs:
>
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Looks like i2c or gpio maintainers should be taking it, but since Linus acked
it instead of applied it, I guess we can take it. :)
I'll apply it to next/cleanup for 3.12 if you resend me the patch with the
acks. Thanks!
-Olof
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] gpio: (gpio-pca953x) move header to linux/platform_data/
2013-08-29 18:00 ` Olof Johansson
(?)
@ 2013-08-29 18:46 ` Linus Walleij
-1 siblings, 0 replies; 22+ messages in thread
From: Linus Walleij @ 2013-08-29 18:46 UTC (permalink / raw)
To: Olof Johansson
Cc: Vivien Didelot, arm, Kevin Hilman, linux-gpio, kernel,
linux-kernel, linux-arm-kernel, H Hartley Sweeten
On Thu, Aug 29, 2013 at 8:00 PM, Olof Johansson <olof@lixom.net> wrote:
> On Thu, Aug 29, 2013 at 01:52:58PM -0400, Vivien Didelot wrote:
>> As this patch mainly touches arch/arm/*, Olof/Kevin, would you mind
>> applying it?
>>
>> The first message in thread is here: https://lkml.org/lkml/2013/7/31/552
>> Here are the previous ACKs:
>>
>> Acked-by: Linus Walleij <linus.walleij@linaro.org>
>> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
>
> Looks like i2c or gpio maintainers should be taking it, but since Linus acked
> it instead of applied it, I guess we can take it. :)
>
> I'll apply it to next/cleanup for 3.12 if you resend me the patch with the
> acks. Thanks!
Thanks a lot Olof, I worried about all the hunks hitting the arch/arm/*
hierarchy, and not much is happening in drivers/gpio this cycle
so think it is better off in ARM SoC.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] gpio: (gpio-pca953x) move header to linux/platform_data/
@ 2013-08-29 18:46 ` Linus Walleij
0 siblings, 0 replies; 22+ messages in thread
From: Linus Walleij @ 2013-08-29 18:46 UTC (permalink / raw)
To: Olof Johansson
Cc: Vivien Didelot, arm, Kevin Hilman, linux-gpio, kernel,
linux-kernel, linux-arm-kernel, H Hartley Sweeten
On Thu, Aug 29, 2013 at 8:00 PM, Olof Johansson <olof@lixom.net> wrote:
> On Thu, Aug 29, 2013 at 01:52:58PM -0400, Vivien Didelot wrote:
>> As this patch mainly touches arch/arm/*, Olof/Kevin, would you mind
>> applying it?
>>
>> The first message in thread is here: https://lkml.org/lkml/2013/7/31/552
>> Here are the previous ACKs:
>>
>> Acked-by: Linus Walleij <linus.walleij@linaro.org>
>> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
>
> Looks like i2c or gpio maintainers should be taking it, but since Linus acked
> it instead of applied it, I guess we can take it. :)
>
> I'll apply it to next/cleanup for 3.12 if you resend me the patch with the
> acks. Thanks!
Thanks a lot Olof, I worried about all the hunks hitting the arch/arm/*
hierarchy, and not much is happening in drivers/gpio this cycle
so think it is better off in ARM SoC.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH] gpio: (gpio-pca953x) move header to linux/platform_data/
@ 2013-08-29 18:46 ` Linus Walleij
0 siblings, 0 replies; 22+ messages in thread
From: Linus Walleij @ 2013-08-29 18:46 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Aug 29, 2013 at 8:00 PM, Olof Johansson <olof@lixom.net> wrote:
> On Thu, Aug 29, 2013 at 01:52:58PM -0400, Vivien Didelot wrote:
>> As this patch mainly touches arch/arm/*, Olof/Kevin, would you mind
>> applying it?
>>
>> The first message in thread is here: https://lkml.org/lkml/2013/7/31/552
>> Here are the previous ACKs:
>>
>> Acked-by: Linus Walleij <linus.walleij@linaro.org>
>> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
>
> Looks like i2c or gpio maintainers should be taking it, but since Linus acked
> it instead of applied it, I guess we can take it. :)
>
> I'll apply it to next/cleanup for 3.12 if you resend me the patch with the
> acks. Thanks!
Thanks a lot Olof, I worried about all the hunks hitting the arch/arm/*
hierarchy, and not much is happening in drivers/gpio this cycle
so think it is better off in ARM SoC.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 22+ messages in thread
end of thread, other threads:[~2013-08-29 18:46 UTC | newest]
Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-07-31 20:57 [PATCH] gpio: (gpio-pca953x) move header to linux/platform_data/ Vivien Didelot
2013-07-31 20:57 ` Vivien Didelot
2013-07-31 21:03 ` H Hartley Sweeten
2013-07-31 21:03 ` H Hartley Sweeten
2013-08-16 13:34 ` Linus Walleij
2013-08-16 13:34 ` Linus Walleij
2013-08-16 13:34 ` Linus Walleij
2013-08-16 15:02 ` Vivien Didelot
2013-08-16 15:02 ` Vivien Didelot
2013-08-16 15:42 ` Linus Walleij
2013-08-16 15:42 ` Linus Walleij
2013-08-16 15:42 ` Linus Walleij
2013-08-16 19:06 ` H Hartley Sweeten
2013-08-16 19:06 ` H Hartley Sweeten
2013-08-16 19:06 ` H Hartley Sweeten
2013-08-29 17:52 ` Vivien Didelot
2013-08-29 17:52 ` Vivien Didelot
2013-08-29 18:00 ` Olof Johansson
2013-08-29 18:00 ` Olof Johansson
2013-08-29 18:46 ` Linus Walleij
2013-08-29 18:46 ` Linus Walleij
2013-08-29 18:46 ` Linus Walleij
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.