* [PATCH] arm: pxa: remove dead and obsolete IrDA initialization
@ 2021-12-29 18:48 ` Lukas Bulwahn
0 siblings, 0 replies; 6+ messages in thread
From: Lukas Bulwahn @ 2021-12-29 18:48 UTC (permalink / raw)
To: Daniel Mack, Haojian Zhuang, Robert Jarzmik, Russell King,
Philipp Zabel, Paul Parsons, Marek Vasut, Tomas Cech,
Sergey Lapin, linux-arm-kernel
Cc: kernel-janitors, linux-kernel, Lukas Bulwahn
Commit d64c2a76123f ("staging: irda: remove the irda network stack and
drivers") removes the Intel PXA2xx Internal FICP driver, and the config
PXA_FICP and the config IRDA.
Further, this removes any proper effect from the setup functions in the
file ./include/linux/platform_data/irda-pxaficp.h. So, delete all users
in arch/arm/mach-pxa/ and this header file.
Clean up radically various left-over of IRDA in the ./arch/arm/mach-pxa.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
---
arch/arm/mach-pxa/balloon3.c | 18 -----
arch/arm/mach-pxa/corgi.c | 10 ---
arch/arm/mach-pxa/devices.c | 42 ------------
arch/arm/mach-pxa/eseries.c | 8 ---
arch/arm/mach-pxa/hx4700.c | 11 ---
arch/arm/mach-pxa/include/mach/eseries-gpio.h | 3 -
arch/arm/mach-pxa/lpd270.c | 1 -
arch/arm/mach-pxa/lubbock.c | 22 ------
arch/arm/mach-pxa/magician.c | 12 ----
arch/arm/mach-pxa/mainstone.c | 27 --------
arch/arm/mach-pxa/palm27x.c | 16 -----
arch/arm/mach-pxa/palm27x.h | 6 --
arch/arm/mach-pxa/palmld.c | 2 -
arch/arm/mach-pxa/palmt5.c | 2 -
arch/arm/mach-pxa/palmtc.c | 19 ------
arch/arm/mach-pxa/palmte2.c | 9 ---
arch/arm/mach-pxa/palmtreo.c | 2 -
arch/arm/mach-pxa/palmtx.c | 2 -
arch/arm/mach-pxa/palmz72.c | 2 -
arch/arm/mach-pxa/poodle.c | 11 ---
arch/arm/mach-pxa/pxa2xx.c | 29 --------
arch/arm/mach-pxa/spitz.c | 23 -------
arch/arm/mach-pxa/tosa.c | 64 ------------------
arch/arm/mach-pxa/trizeps4.c | 67 -------------------
include/linux/platform_data/irda-pxaficp.h | 26 -------
25 files changed, 434 deletions(-)
delete mode 100644 include/linux/platform_data/irda-pxaficp.h
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 26140249c784..9cf9dca337e8 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -46,7 +46,6 @@
#include <linux/platform_data/mmc-pxamci.h>
#include "udc.h"
#include "pxa27x-udc.h"
-#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
#include "generic.h"
@@ -330,22 +329,6 @@ static void __init balloon3_udc_init(void)
static inline void balloon3_udc_init(void) {}
#endif
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
-static struct pxaficp_platform_data balloon3_ficp_platform_data = {
- .transceiver_cap = IR_FIRMODE | IR_SIRMODE | IR_OFF,
-};
-
-static void __init balloon3_irda_init(void)
-{
- pxa_set_ficp_info(&balloon3_ficp_platform_data);
-}
-#else
-static inline void balloon3_irda_init(void) {}
-#endif
-
/******************************************************************************
* USB Host
******************************************************************************/
@@ -780,7 +763,6 @@ static void __init balloon3_init(void)
pxa_set_stuart_info(NULL);
balloon3_i2c_init();
- balloon3_irda_init();
balloon3_lcd_init();
balloon3_leds_init();
balloon3_mmc_init();
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 593c7f793da5..7e9764911bf6 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -47,7 +47,6 @@
#include <asm/mach/irq.h>
#include "pxa25x.h"
-#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/mmc-pxamci.h>
#include "udc.h"
#include <mach/corgi.h>
@@ -508,14 +507,6 @@ static struct gpiod_lookup_table corgi_mci_gpio_table = {
},
};
-/*
- * Irda
- */
-static struct pxaficp_platform_data corgi_ficp_platform_data = {
- .gpio_pwdown = CORGI_GPIO_IR_ON,
- .transceiver_cap = IR_SIRMODE | IR_OFF,
-};
-
/*
* USB Device Controller
@@ -750,7 +741,6 @@ static void __init corgi_init(void)
pxa_set_udc_info(&udc_info);
gpiod_add_lookup_table(&corgi_mci_gpio_table);
pxa_set_mci_info(&corgi_mci_platform_data);
- pxa_set_ficp_info(&corgi_ficp_platform_data);
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(corgi_i2c_devices));
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 09b8495f3fd9..d475a934e8c3 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -14,7 +14,6 @@
#include <linux/platform_data/usb-pxa3xx-ulpi.h>
#include <linux/platform_data/video-pxafb.h>
#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include <mach/irqs.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <linux/platform_data/keypad-pxa27x.h>
@@ -376,47 +375,6 @@ struct platform_device pxa_device_asoc_platform = {
.id = -1,
};
-static u64 pxaficp_dmamask = ~(u32)0;
-
-static struct resource pxa_ir_resources[] = {
- [0] = {
- .start = IRQ_STUART,
- .end = IRQ_STUART,
- .flags = IORESOURCE_IRQ,
- },
- [1] = {
- .start = IRQ_ICP,
- .end = IRQ_ICP,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = 0x40800000,
- .end = 0x4080001b,
- .flags = IORESOURCE_MEM,
- },
- [4] = {
- .start = 0x40700000,
- .end = 0x40700023,
- .flags = IORESOURCE_MEM,
- },
-};
-
-struct platform_device pxa_device_ficp = {
- .name = "pxa2xx-ir",
- .id = -1,
- .num_resources = ARRAY_SIZE(pxa_ir_resources),
- .resource = pxa_ir_resources,
- .dev = {
- .dma_mask = &pxaficp_dmamask,
- .coherent_dma_mask = 0xffffffff,
- },
-};
-
-void __init pxa_set_ficp_info(struct pxaficp_platform_data *info)
-{
- pxa_register_device(&pxa_device_ficp, info);
-}
-
static struct resource pxa_rtc_resources[] = {
[0] = {
.start = 0x40900000,
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index f37c44b6139d..5631ab600ad6 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -37,7 +37,6 @@
#include <mach/audio.h>
#include <linux/platform_data/video-pxafb.h>
#include "udc.h"
-#include <linux/platform_data/irda-pxaficp.h>
#include "devices.h"
#include "generic.h"
@@ -67,11 +66,6 @@ static struct platform_device e7xx_gpio_vbus __maybe_unused = {
.id = -1,
};
-struct pxaficp_platform_data e7xx_ficp_platform_data = {
- .gpio_pwdown = GPIO_E7XX_IR_OFF,
- .transceiver_cap = IR_SIRMODE | IR_OFF,
-};
-
int eseries_tmio_enable(struct platform_device *dev)
{
/* Reset - bring SUSPEND high before PCLR */
@@ -542,7 +536,6 @@ static void __init e740_init(void)
gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
platform_add_devices(ARRAY_AND_SIZE(e740_devices));
pxa_set_ac97_info(NULL);
- pxa_set_ficp_info(&e7xx_ficp_platform_data);
}
MACHINE_START(E740, "Toshiba e740")
@@ -742,7 +735,6 @@ static void __init e750_init(void)
gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
platform_add_devices(ARRAY_AND_SIZE(e750_devices));
pxa_set_ac97_info(NULL);
- pxa_set_ficp_info(&e7xx_ficp_platform_data);
}
MACHINE_START(E750, "Toshiba e750")
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 1d4c5db54be2..1b4ff555c604 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -42,7 +42,6 @@
#include "pxa27x.h"
#include <mach/hx4700.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include <sound/ak4641.h>
#include <video/platform_lcd.h>
@@ -151,15 +150,6 @@ static unsigned long hx4700_pin_config[] __initdata = {
GPIO66_GPIO, /* nSDIO_IRQ */
};
-/*
- * IRDA
- */
-
-static struct pxaficp_platform_data ficp_info = {
- .gpio_pwdown = GPIO105_HX4700_nIR_ON,
- .transceiver_cap = IR_SIRMODE | IR_OFF,
-};
-
/*
* GPIO Keys
*/
@@ -891,7 +881,6 @@ static void __init hx4700_init(void)
platform_add_devices(devices, ARRAY_SIZE(devices));
pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup));
- pxa_set_ficp_info(&ficp_info);
pxa27x_set_i2c_power_info(NULL);
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info));
diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
index 5c645600d401..e38c7ee019f8 100644
--- a/arch/arm/mach-pxa/include/mach/eseries-gpio.h
+++ b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
@@ -38,9 +38,6 @@
#define GPIO_E800_PCMCIA_PWR0 20
#define GPIO_E800_PCMCIA_PWR1 73
-/* e7xx IrDA power control */
-#define GPIO_E7XX_IR_OFF 38
-
/* e740 audio control GPIOs */
#define GPIO_E740_WM9705_nAVDD2 16
#define GPIO_E740_MIC_ON 40
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 6fc40bc06910..f13ba9b9f83e 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -42,7 +42,6 @@
#include <mach/audio.h>
#include <linux/platform_data/video-pxafb.h>
#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/smemc.h>
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index e2411971422d..574897eae2a3 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -49,7 +49,6 @@
#include <mach/audio.h>
#include <mach/lubbock.h>
#include "udc.h"
-#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/video-pxafb.h>
#include <linux/platform_data/mmc-pxamci.h>
#include "pm.h"
@@ -455,26 +454,6 @@ static struct pxamci_platform_data lubbock_mci_platform_data = {
.exit = lubbock_mci_exit,
};
-static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- if (mode & IR_SIRMODE) {
- lubbock_set_misc_wr(BIT(4), 0);
- } else if (mode & IR_FIRMODE) {
- lubbock_set_misc_wr(BIT(4), BIT(4));
- }
- pxa2xx_transceiver_mode(dev, mode);
- local_irq_restore(flags);
-}
-
-static struct pxaficp_platform_data lubbock_ficp_platform_data = {
- .gpio_pwdown = -1,
- .transceiver_cap = IR_SIRMODE | IR_FIRMODE,
- .transceiver_mode = lubbock_irda_transceiver_mode,
-};
-
static void __init lubbock_init(void)
{
int flashboot = (LUB_CONF_SWITCHES & 1);
@@ -500,7 +479,6 @@ static void __init lubbock_init(void)
pxa_set_udc_info(&udc_info);
pxa_set_fb_info(NULL, &sharp_lm8v31);
pxa_set_mci_info(&lubbock_mci_platform_data);
- pxa_set_ficp_info(&lubbock_ficp_platform_data);
pxa_set_ac97_info(NULL);
lubbock_flash_data[0].width = lubbock_flash_data[1].width =
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index cd9fa465b9b2..4471855ffaff 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -38,7 +38,6 @@
#include <mach/magician.h>
#include <linux/platform_data/video-pxafb.h>
#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <linux/regulator/max1586.h>
@@ -123,16 +122,6 @@ static unsigned long magician_pin_config[] __initdata = {
GPIO115_GPIO, /* nPEN_IRQ */
};
-/*
- * IrDA
- */
-
-static struct pxaficp_platform_data magician_ficp_info = {
- .gpio_pwdown = GPIO83_MAGICIAN_nIR_EN,
- .transceiver_cap = IR_SIRMODE | IR_OFF,
- .gpio_pwdown_inverted = 0,
-};
-
/*
* GPIO Keys
*/
@@ -1001,7 +990,6 @@ static void __init magician_init(void)
pwm_add_table(magician_pwm_lookup, ARRAY_SIZE(magician_pwm_lookup));
- pxa_set_ficp_info(&magician_ficp_info);
pxa27x_set_i2c_power_info(&magician_i2c_power_info);
pxa_set_i2c_info(&i2c_info);
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index d237bd030238..603af99c660a 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -49,7 +49,6 @@
#include <mach/audio.h>
#include <linux/platform_data/video-pxafb.h>
#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/smemc.h>
@@ -360,31 +359,6 @@ static struct pxamci_platform_data mainstone_mci_platform_data = {
.exit = mainstone_mci_exit,
};
-static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- if (mode & IR_SIRMODE) {
- MST_MSCWR1 &= ~MST_MSCWR1_IRDA_FIR;
- } else if (mode & IR_FIRMODE) {
- MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR;
- }
- pxa2xx_transceiver_mode(dev, mode);
- if (mode & IR_OFF) {
- MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF;
- } else {
- MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_FULL;
- }
- local_irq_restore(flags);
-}
-
-static struct pxaficp_platform_data mainstone_ficp_platform_data = {
- .gpio_pwdown = -1,
- .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
- .transceiver_mode = mainstone_irda_transceiver_mode,
-};
-
static struct gpio_keys_button gpio_keys_button[] = {
[0] = {
.desc = "wakeup",
@@ -596,7 +570,6 @@ static void __init mainstone_init(void)
mainstone_backlight_register();
pxa_set_mci_info(&mainstone_mci_platform_data);
- pxa_set_ficp_info(&mainstone_ficp_platform_data);
pxa_set_ohci_info(&mainstone_ohci_platform_data);
pxa_set_i2c_info(NULL);
pxa_set_ac97_info(&mst_audio_ops);
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index 6230381a7ca0..9bb2f892d7a9 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -28,7 +28,6 @@
#include <mach/audio.h>
#include <linux/platform_data/mmc-pxamci.h>
#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include "udc.h"
#include <linux/platform_data/asoc-palm27x.h>
#include "palm27x.h"
@@ -189,21 +188,6 @@ void __init palm27x_udc_init(int vbus, int pullup, int vbus_inverted)
}
#endif
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
-static struct pxaficp_platform_data palm27x_ficp_platform_data = {
- .transceiver_cap = IR_SIRMODE | IR_OFF,
-};
-
-void __init palm27x_irda_init(int pwdn)
-{
- palm27x_ficp_platform_data.gpio_pwdown = pwdn;
- pxa_set_ficp_info(&palm27x_ficp_platform_data);
-}
-#endif
-
/******************************************************************************
* WM97xx audio, battery
******************************************************************************/
diff --git a/arch/arm/mach-pxa/palm27x.h b/arch/arm/mach-pxa/palm27x.h
index bd3075bbb3aa..7985a608db55 100644
--- a/arch/arm/mach-pxa/palm27x.h
+++ b/arch/arm/mach-pxa/palm27x.h
@@ -41,12 +41,6 @@ extern void __init palm27x_udc_init(int vbus, int pullup,
static inline void palm27x_udc_init(int vbus, int pullup, int vbus_inverted) {}
#endif
-#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
-extern void __init palm27x_irda_init(int pwdn);
-#else
-static inline void palm27x_irda_init(int pwdn) {}
-#endif
-
#if defined(CONFIG_TOUCHSCREEN_WM97XX) || \
defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE)
extern void __init palm27x_ac97_init(int minv, int maxv, int jack,
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 5f73716a77f0..8e780d1103e5 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -33,7 +33,6 @@
#include <mach/palmld.h>
#include <linux/platform_data/mmc-pxamci.h>
#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/keypad-pxa27x.h>
#include <linux/platform_data/asoc-palm27x.h>
#include "palm27x.h"
@@ -351,7 +350,6 @@ static void __init palmld_init(void)
palm27x_mmc_init(&palmld_mci_gpio_table);
palm27x_pm_init(PALMLD_STR_BASE);
palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
- palm27x_irda_init(GPIO_NR_PALMLD_IR_DISABLE);
palm27x_ac97_init(PALMLD_BAT_MIN_VOLTAGE, PALMLD_BAT_MAX_VOLTAGE,
GPIO_NR_PALMLD_EARPHONE_DETECT, 95);
palm27x_pwm_init(GPIO_NR_PALMLD_BL_POWER, GPIO_NR_PALMLD_LCD_POWER);
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 7c7cbb4e677e..858e805dd0b0 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -33,7 +33,6 @@
#include "palmt5.h"
#include <linux/platform_data/mmc-pxamci.h>
#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/keypad-pxa27x.h>
#include "udc.h"
#include <linux/platform_data/asoc-palm27x.h>
@@ -202,7 +201,6 @@ static void __init palmt5_init(void)
palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
palm27x_udc_init(GPIO_NR_PALMT5_USB_DETECT_N,
GPIO_NR_PALMT5_USB_PULLUP, 1);
- palm27x_irda_init(GPIO_NR_PALMT5_IR_DISABLE);
palm27x_ac97_init(PALMT5_BAT_MIN_VOLTAGE, PALMT5_BAT_MAX_VOLTAGE,
GPIO_NR_PALMT5_EARPHONE_DETECT, 95);
palm27x_pwm_init(GPIO_NR_PALMT5_BL_POWER, GPIO_NR_PALMT5_LCD_POWER);
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 455cb8ccaf26..6961bc61b485 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -33,7 +33,6 @@
#include <mach/palmtc.h>
#include <linux/platform_data/mmc-pxamci.h>
#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include "udc.h"
#include "generic.h"
@@ -211,23 +210,6 @@ static void __init palmtc_pwm_init(void)
static inline void palmtc_pwm_init(void) {}
#endif
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
-static struct pxaficp_platform_data palmtc_ficp_platform_data = {
- .gpio_pwdown = GPIO_NR_PALMTC_IR_DISABLE,
- .transceiver_cap = IR_SIRMODE | IR_OFF,
-};
-
-static void __init palmtc_irda_init(void)
-{
- pxa_set_ficp_info(&palmtc_ficp_platform_data);
-}
-#else
-static inline void palmtc_irda_init(void) {}
-#endif
-
/******************************************************************************
* Keyboard
******************************************************************************/
@@ -518,7 +500,6 @@ static void __init palmtc_init(void)
palmtc_mmc_init();
palmtc_keys_init();
palmtc_pwm_init();
- palmtc_irda_init();
palmtc_mkp_init();
palmtc_udc_init();
palmtc_ts_init();
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index a2b10db4aacc..1d8f47dc93f0 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -33,7 +33,6 @@
#include "palmte2.h"
#include <linux/platform_data/mmc-pxamci.h>
#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include "udc.h"
#include <linux/platform_data/asoc-palm27x.h>
@@ -188,14 +187,6 @@ static struct platform_device palmte2_backlight = {
},
};
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data palmte2_ficp_platform_data = {
- .gpio_pwdown = GPIO_NR_PALMTE2_IR_DISABLE,
- .transceiver_cap = IR_SIRMODE | IR_OFF,
-};
-
/******************************************************************************
* UDC
******************************************************************************/
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index 2bf0f7f3ea24..c31a0017d17f 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -33,7 +33,6 @@
#include "palmtreo.h"
#include <linux/platform_data/mmc-pxamci.h>
#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/keypad-pxa27x.h>
#include "udc.h"
#include <linux/platform_data/usb-ohci-pxa27x.h>
@@ -417,7 +416,6 @@ static void __init palmphone_common_init(void)
palm27x_pm_init(TREO_STR_BASE);
palm27x_lcd_init(GPIO_NR_TREO_BL_POWER, &palm_320x320_new_lcd_mode);
palm27x_udc_init(GPIO_NR_TREO_USB_DETECT, GPIO_NR_TREO_USB_PULLUP, 1);
- palm27x_irda_init(GPIO_NR_TREO_IR_EN);
palm27x_ac97_init(-1, -1, -1, 95);
palm27x_pwm_init(GPIO_NR_TREO_BL_POWER, -1);
palm27x_power_init(GPIO_NR_TREO_POWER_DETECT, -1);
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 07332c92c9f7..288e2bcf20c3 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -36,7 +36,6 @@
#include <mach/palmtx.h>
#include <linux/platform_data/mmc-pxamci.h>
#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/keypad-pxa27x.h>
#include "udc.h"
#include <linux/platform_data/asoc-palm27x.h>
@@ -357,7 +356,6 @@ static void __init palmtx_init(void)
palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
palm27x_udc_init(GPIO_NR_PALMTX_USB_DETECT_N,
GPIO_NR_PALMTX_USB_PULLUP, 1);
- palm27x_irda_init(GPIO_NR_PALMTX_IR_DISABLE);
palm27x_ac97_init(PALMTX_BAT_MIN_VOLTAGE, PALMTX_BAT_MAX_VOLTAGE,
GPIO_NR_PALMTX_EARPHONE_DETECT, 95);
palm27x_pwm_init(GPIO_NR_PALMTX_BL_POWER, GPIO_NR_PALMTX_LCD_POWER);
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index b4a5fe02a0af..a7dc9bc6186b 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -38,7 +38,6 @@
#include "palmz72.h"
#include <linux/platform_data/mmc-pxamci.h>
#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/keypad-pxa27x.h>
#include "udc.h"
#include <linux/platform_data/asoc-palm27x.h>
@@ -297,7 +296,6 @@ static void __init palmz72_init(void)
palm27x_lcd_init(-1, &palm_320x320_lcd_mode);
palm27x_udc_init(GPIO_NR_PALMZ72_USB_DETECT_N,
GPIO_NR_PALMZ72_USB_PULLUP, 0);
- palm27x_irda_init(GPIO_NR_PALMZ72_IR_DISABLE);
palm27x_ac97_init(PALMZ72_BAT_MIN_VOLTAGE, PALMZ72_BAT_MAX_VOLTAGE,
-1, 113);
palm27x_pwm_init(-1, -1);
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 3a4ecc3c8f8b..c4c8c3dc1e5b 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -42,7 +42,6 @@
#include "pxa25x.h"
#include <linux/platform_data/mmc-pxamci.h>
#include "udc.h"
-#include <linux/platform_data/irda-pxaficp.h>
#include <mach/poodle.h>
#include <linux/platform_data/video-pxafb.h>
@@ -299,15 +298,6 @@ static struct gpiod_lookup_table poodle_mci_gpio_table = {
},
};
-/*
- * Irda
- */
-static struct pxaficp_platform_data poodle_ficp_platform_data = {
- .gpio_pwdown = POODLE_GPIO_IR_ON,
- .transceiver_cap = IR_SIRMODE | IR_OFF,
-};
-
-
/*
* USB Device Controller
*/
@@ -446,7 +436,6 @@ static void __init poodle_init(void)
pxa_set_udc_info(&udc_info);
gpiod_add_lookup_table(&poodle_mci_gpio_table);
pxa_set_mci_info(&poodle_mci_platform_data);
- pxa_set_ficp_info(&poodle_ficp_platform_data);
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(poodle_i2c_devices));
poodle_init_spi();
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
index 2d26cd2afbf3..973b1fbde63e 100644
--- a/arch/arm/mach-pxa/pxa2xx.c
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -16,38 +16,9 @@
#include <mach/pxa2xx-regs.h>
#include "mfp-pxa25x.h"
#include <mach/reset.h>
-#include <linux/platform_data/irda-pxaficp.h>
void pxa2xx_clear_reset_status(unsigned int mask)
{
/* RESET_STATUS_* has a 1:1 mapping with RCSR */
RCSR = mask;
}
-
-static unsigned long pxa2xx_mfp_fir[] = {
- GPIO46_FICP_RXD,
- GPIO47_FICP_TXD,
-};
-
-static unsigned long pxa2xx_mfp_sir[] = {
- GPIO46_STUART_RXD,
- GPIO47_STUART_TXD,
-};
-
-static unsigned long pxa2xx_mfp_off[] = {
- GPIO46_GPIO | MFP_LPM_DRIVE_LOW,
- GPIO47_GPIO | MFP_LPM_DRIVE_LOW,
-};
-
-void pxa2xx_transceiver_mode(struct device *dev, int mode)
-{
- if (mode & IR_OFF) {
- pxa2xx_mfp_config(pxa2xx_mfp_off, ARRAY_SIZE(pxa2xx_mfp_off));
- } else if (mode & IR_SIRMODE) {
- pxa2xx_mfp_config(pxa2xx_mfp_sir, ARRAY_SIZE(pxa2xx_mfp_sir));
- } else if (mode & IR_FIRMODE) {
- pxa2xx_mfp_config(pxa2xx_mfp_fir, ARRAY_SIZE(pxa2xx_mfp_fir));
- } else
- BUG();
-}
-EXPORT_SYMBOL_GPL(pxa2xx_transceiver_mode);
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 371008e9bb02..8c4aef0cbd1f 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -40,7 +40,6 @@
#include "pxa27x.h"
#include "pxa27x-udc.h"
#include <mach/reset.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/mmc-pxamci.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <linux/platform_data/video-pxafb.h>
@@ -691,27 +690,6 @@ static void __init spitz_uhc_init(void)
static inline void spitz_uhc_init(void) {}
#endif
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-#if defined(CONFIG_PXA_FICP) || defined(CONFIG_PXA_FICP_MODULE)
-static struct pxaficp_platform_data spitz_ficp_platform_data = {
- .transceiver_cap = IR_SIRMODE | IR_OFF,
-};
-
-static void __init spitz_irda_init(void)
-{
- if (machine_is_akita())
- spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON;
- else
- spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
-
- pxa_set_ficp_info(&spitz_ficp_platform_data);
-}
-#else
-static inline void spitz_irda_init(void) {}
-#endif
-
/******************************************************************************
* Framebuffer
******************************************************************************/
@@ -1015,7 +993,6 @@ static void __init spitz_init(void)
spitz_leds_init();
spitz_mmc_init();
spitz_pcmcia_init();
- spitz_irda_init();
spitz_uhc_init();
spitz_lcd_init();
spitz_nor_init();
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 431709725d02..fe3393f1f50a 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -41,7 +41,6 @@
#include "pxa25x.h"
#include <mach/reset.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/mmc-pxamci.h>
#include "udc.h"
#include "tosa_bt.h"
@@ -304,68 +303,6 @@ static struct gpiod_lookup_table tosa_mci_gpio_table = {
},
};
-/*
- * Irda
- */
-static void tosa_irda_transceiver_mode(struct device *dev, int mode)
-{
- if (mode & IR_OFF) {
- gpio_set_value(TOSA_GPIO_IR_POWERDWN, 0);
- pxa2xx_transceiver_mode(dev, mode);
- gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
- } else {
- pxa2xx_transceiver_mode(dev, mode);
- gpio_set_value(TOSA_GPIO_IR_POWERDWN, 1);
- }
-}
-
-static int tosa_irda_startup(struct device *dev)
-{
- int ret;
-
- ret = gpio_request(TOSA_GPIO_IRDA_TX, "IrDA TX");
- if (ret)
- goto err_tx;
- ret = gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
- if (ret)
- goto err_tx_dir;
-
- ret = gpio_request(TOSA_GPIO_IR_POWERDWN, "IrDA powerdown");
- if (ret)
- goto err_pwr;
-
- ret = gpio_direction_output(TOSA_GPIO_IR_POWERDWN, 0);
- if (ret)
- goto err_pwr_dir;
-
- tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
-
- return 0;
-
-err_pwr_dir:
- gpio_free(TOSA_GPIO_IR_POWERDWN);
-err_pwr:
-err_tx_dir:
- gpio_free(TOSA_GPIO_IRDA_TX);
-err_tx:
- return ret;
-}
-
-static void tosa_irda_shutdown(struct device *dev)
-{
- tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
- gpio_free(TOSA_GPIO_IR_POWERDWN);
- gpio_free(TOSA_GPIO_IRDA_TX);
-}
-
-static struct pxaficp_platform_data tosa_ficp_platform_data = {
- .gpio_pwdown = -1,
- .transceiver_cap = IR_SIRMODE | IR_OFF,
- .transceiver_mode = tosa_irda_transceiver_mode,
- .startup = tosa_irda_startup,
- .shutdown = tosa_irda_shutdown,
-};
-
/*
* Tosa AC IN
*/
@@ -945,7 +882,6 @@ static void __init tosa_init(void)
gpiod_add_lookup_table(&tosa_mci_gpio_table);
pxa_set_mci_info(&tosa_mci_platform_data);
- pxa_set_ficp_info(&tosa_ficp_platform_data);
pxa_set_i2c_info(NULL);
pxa_set_ac97_info(NULL);
platform_scoop_config = &tosa_pcmcia_config;
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index f76f8be09554..4bd426b13515 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -44,18 +44,12 @@
#include <mach/audio.h>
#include <linux/platform_data/video-pxafb.h>
#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/smemc.h>
#include "generic.h"
#include "devices.h"
-/* comment out the following line if you want to use the
- * Standard UART from PXA for serial / irda transmission
- * and acivate it if you have status leds connected */
-#define STATUS_LEDS_ON_STUART_PINS 1
-
/*****************************************************************************
* MultiFunctionPins of CPU
*****************************************************************************/
@@ -94,13 +88,8 @@ static unsigned long trizeps4_pin_config[] __initdata = {
GPIO43_BTUART_TXD,
GPIO44_BTUART_CTS,
GPIO45_BTUART_RTS,
-#ifdef STATUS_LEDS_ON_STUART_PINS
GPIO46_GPIO,
GPIO47_GPIO,
-#else
- GPIO46_STUART_RXD,
- GPIO47_STUART_TXD,
-#endif
/* PCMCIA */
GPIO11_GPIO, /* TRIZEPS4_CD_IRQ */
GPIO13_GPIO, /* TRIZEPS4_READY_NINT */
@@ -233,7 +222,6 @@ static struct platform_device dm9000_device = {
* LED's on GPIO pins of PXA
****************************************************************************/
static struct gpio_led trizeps4_led[] = {
-#ifdef STATUS_LEDS_ON_STUART_PINS
{
.name = "led0:orange:heartbeat", /* */
.default_trigger = "heartbeat",
@@ -246,7 +234,6 @@ static struct gpio_led trizeps4_led[] = {
.gpio = GPIO_SYS_BUSY_LED,
.active_low = 1,
},
-#endif
};
static struct gpio_led_platform_data trizeps4_led_data = {
@@ -354,57 +341,6 @@ static struct pxamci_platform_data trizeps4_mci_platform_data = {
.setpower = NULL, /* power-switching not supported */
};
-/****************************************************************************
- * IRDA mode switching on stuart
- ****************************************************************************/
-#ifndef STATUS_LEDS_ON_STUART_PINS
-static short trizeps_conxs_ircr;
-
-static int trizeps4_irda_startup(struct device *dev)
-{
- trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
- IRCR_writew(trizeps_conxs_ircr);
- return 0;
-}
-
-static void trizeps4_irda_shutdown(struct device *dev)
-{
- trizeps_conxs_ircr |= ConXS_IRCR_SD;
- IRCR_writew(trizeps_conxs_ircr);
-}
-
-static void trizeps4_irda_transceiver_mode(struct device *dev, int mode)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- /* Switch mode */
- if (mode & IR_SIRMODE)
- trizeps_conxs_ircr &= ~ConXS_IRCR_MODE; /* Slow mode */
- else if (mode & IR_FIRMODE)
- trizeps_conxs_ircr |= ConXS_IRCR_MODE; /* Fast mode */
-
- /* Switch power */
- if (mode & IR_OFF)
- trizeps_conxs_ircr |= ConXS_IRCR_SD;
- else
- trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
-
- IRCR_writew(trizeps_conxs_ircr);
- local_irq_restore(flags);
-
- pxa2xx_transceiver_mode(dev, mode);
-}
-
-static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
- .gpio_pwdown = -1,
- .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
- .transceiver_mode = trizeps4_irda_transceiver_mode,
- .startup = trizeps4_irda_startup,
- .shutdown = trizeps4_irda_shutdown,
-};
-#endif
-
/****************************************************************************
* OHCI USB port
****************************************************************************/
@@ -516,9 +452,6 @@ static void __init trizeps4_init(void)
pxa_set_fb_info(NULL, &toshiba_lcd);
pxa_set_mci_info(&trizeps4_mci_platform_data);
-#ifndef STATUS_LEDS_ON_STUART_PINS
- pxa_set_ficp_info(&trizeps4_ficp_platform_data);
-#endif
pxa_set_ohci_info(&trizeps4_ohci_platform_data);
pxa_set_ac97_info(NULL);
pxa_set_i2c_info(NULL);
diff --git a/include/linux/platform_data/irda-pxaficp.h b/include/linux/platform_data/irda-pxaficp.h
deleted file mode 100644
index bd35ddcf3068..000000000000
--- a/include/linux/platform_data/irda-pxaficp.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef ASMARM_ARCH_IRDA_H
-#define ASMARM_ARCH_IRDA_H
-
-/* board specific transceiver capabilities */
-
-#define IR_OFF 1
-#define IR_SIRMODE 2
-#define IR_FIRMODE 4
-
-struct pxaficp_platform_data {
- int transceiver_cap;
- void (*transceiver_mode)(struct device *dev, int mode);
- int (*startup)(struct device *dev);
- void (*shutdown)(struct device *dev);
- int gpio_pwdown; /* powerdown GPIO for the IrDA chip */
- bool gpio_pwdown_inverted; /* gpio_pwdown is inverted */
-};
-
-extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);
-
-#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
-void pxa2xx_transceiver_mode(struct device *dev, int mode);
-#endif
-
-#endif
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH] arm: pxa: remove dead and obsolete IrDA initialization
@ 2021-12-29 18:48 ` Lukas Bulwahn
0 siblings, 0 replies; 6+ messages in thread
From: Lukas Bulwahn @ 2021-12-29 18:48 UTC (permalink / raw)
To: Daniel Mack, Haojian Zhuang, Robert Jarzmik, Russell King,
Philipp Zabel, Paul Parsons, Marek Vasut, Tomas Cech,
Sergey Lapin, linux-arm-kernel
Cc: kernel-janitors, linux-kernel, Lukas Bulwahn
Commit d64c2a76123f ("staging: irda: remove the irda network stack and
drivers") removes the Intel PXA2xx Internal FICP driver, and the config
PXA_FICP and the config IRDA.
Further, this removes any proper effect from the setup functions in the
file ./include/linux/platform_data/irda-pxaficp.h. So, delete all users
in arch/arm/mach-pxa/ and this header file.
Clean up radically various left-over of IRDA in the ./arch/arm/mach-pxa.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
---
arch/arm/mach-pxa/balloon3.c | 18 -----
arch/arm/mach-pxa/corgi.c | 10 ---
arch/arm/mach-pxa/devices.c | 42 ------------
arch/arm/mach-pxa/eseries.c | 8 ---
arch/arm/mach-pxa/hx4700.c | 11 ---
arch/arm/mach-pxa/include/mach/eseries-gpio.h | 3 -
arch/arm/mach-pxa/lpd270.c | 1 -
arch/arm/mach-pxa/lubbock.c | 22 ------
arch/arm/mach-pxa/magician.c | 12 ----
arch/arm/mach-pxa/mainstone.c | 27 --------
arch/arm/mach-pxa/palm27x.c | 16 -----
arch/arm/mach-pxa/palm27x.h | 6 --
arch/arm/mach-pxa/palmld.c | 2 -
arch/arm/mach-pxa/palmt5.c | 2 -
arch/arm/mach-pxa/palmtc.c | 19 ------
arch/arm/mach-pxa/palmte2.c | 9 ---
arch/arm/mach-pxa/palmtreo.c | 2 -
arch/arm/mach-pxa/palmtx.c | 2 -
arch/arm/mach-pxa/palmz72.c | 2 -
arch/arm/mach-pxa/poodle.c | 11 ---
arch/arm/mach-pxa/pxa2xx.c | 29 --------
arch/arm/mach-pxa/spitz.c | 23 -------
arch/arm/mach-pxa/tosa.c | 64 ------------------
arch/arm/mach-pxa/trizeps4.c | 67 -------------------
include/linux/platform_data/irda-pxaficp.h | 26 -------
25 files changed, 434 deletions(-)
delete mode 100644 include/linux/platform_data/irda-pxaficp.h
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 26140249c784..9cf9dca337e8 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -46,7 +46,6 @@
#include <linux/platform_data/mmc-pxamci.h>
#include "udc.h"
#include "pxa27x-udc.h"
-#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
#include "generic.h"
@@ -330,22 +329,6 @@ static void __init balloon3_udc_init(void)
static inline void balloon3_udc_init(void) {}
#endif
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
-static struct pxaficp_platform_data balloon3_ficp_platform_data = {
- .transceiver_cap = IR_FIRMODE | IR_SIRMODE | IR_OFF,
-};
-
-static void __init balloon3_irda_init(void)
-{
- pxa_set_ficp_info(&balloon3_ficp_platform_data);
-}
-#else
-static inline void balloon3_irda_init(void) {}
-#endif
-
/******************************************************************************
* USB Host
******************************************************************************/
@@ -780,7 +763,6 @@ static void __init balloon3_init(void)
pxa_set_stuart_info(NULL);
balloon3_i2c_init();
- balloon3_irda_init();
balloon3_lcd_init();
balloon3_leds_init();
balloon3_mmc_init();
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 593c7f793da5..7e9764911bf6 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -47,7 +47,6 @@
#include <asm/mach/irq.h>
#include "pxa25x.h"
-#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/mmc-pxamci.h>
#include "udc.h"
#include <mach/corgi.h>
@@ -508,14 +507,6 @@ static struct gpiod_lookup_table corgi_mci_gpio_table = {
},
};
-/*
- * Irda
- */
-static struct pxaficp_platform_data corgi_ficp_platform_data = {
- .gpio_pwdown = CORGI_GPIO_IR_ON,
- .transceiver_cap = IR_SIRMODE | IR_OFF,
-};
-
/*
* USB Device Controller
@@ -750,7 +741,6 @@ static void __init corgi_init(void)
pxa_set_udc_info(&udc_info);
gpiod_add_lookup_table(&corgi_mci_gpio_table);
pxa_set_mci_info(&corgi_mci_platform_data);
- pxa_set_ficp_info(&corgi_ficp_platform_data);
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(corgi_i2c_devices));
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 09b8495f3fd9..d475a934e8c3 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -14,7 +14,6 @@
#include <linux/platform_data/usb-pxa3xx-ulpi.h>
#include <linux/platform_data/video-pxafb.h>
#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include <mach/irqs.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <linux/platform_data/keypad-pxa27x.h>
@@ -376,47 +375,6 @@ struct platform_device pxa_device_asoc_platform = {
.id = -1,
};
-static u64 pxaficp_dmamask = ~(u32)0;
-
-static struct resource pxa_ir_resources[] = {
- [0] = {
- .start = IRQ_STUART,
- .end = IRQ_STUART,
- .flags = IORESOURCE_IRQ,
- },
- [1] = {
- .start = IRQ_ICP,
- .end = IRQ_ICP,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = 0x40800000,
- .end = 0x4080001b,
- .flags = IORESOURCE_MEM,
- },
- [4] = {
- .start = 0x40700000,
- .end = 0x40700023,
- .flags = IORESOURCE_MEM,
- },
-};
-
-struct platform_device pxa_device_ficp = {
- .name = "pxa2xx-ir",
- .id = -1,
- .num_resources = ARRAY_SIZE(pxa_ir_resources),
- .resource = pxa_ir_resources,
- .dev = {
- .dma_mask = &pxaficp_dmamask,
- .coherent_dma_mask = 0xffffffff,
- },
-};
-
-void __init pxa_set_ficp_info(struct pxaficp_platform_data *info)
-{
- pxa_register_device(&pxa_device_ficp, info);
-}
-
static struct resource pxa_rtc_resources[] = {
[0] = {
.start = 0x40900000,
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index f37c44b6139d..5631ab600ad6 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -37,7 +37,6 @@
#include <mach/audio.h>
#include <linux/platform_data/video-pxafb.h>
#include "udc.h"
-#include <linux/platform_data/irda-pxaficp.h>
#include "devices.h"
#include "generic.h"
@@ -67,11 +66,6 @@ static struct platform_device e7xx_gpio_vbus __maybe_unused = {
.id = -1,
};
-struct pxaficp_platform_data e7xx_ficp_platform_data = {
- .gpio_pwdown = GPIO_E7XX_IR_OFF,
- .transceiver_cap = IR_SIRMODE | IR_OFF,
-};
-
int eseries_tmio_enable(struct platform_device *dev)
{
/* Reset - bring SUSPEND high before PCLR */
@@ -542,7 +536,6 @@ static void __init e740_init(void)
gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
platform_add_devices(ARRAY_AND_SIZE(e740_devices));
pxa_set_ac97_info(NULL);
- pxa_set_ficp_info(&e7xx_ficp_platform_data);
}
MACHINE_START(E740, "Toshiba e740")
@@ -742,7 +735,6 @@ static void __init e750_init(void)
gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
platform_add_devices(ARRAY_AND_SIZE(e750_devices));
pxa_set_ac97_info(NULL);
- pxa_set_ficp_info(&e7xx_ficp_platform_data);
}
MACHINE_START(E750, "Toshiba e750")
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 1d4c5db54be2..1b4ff555c604 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -42,7 +42,6 @@
#include "pxa27x.h"
#include <mach/hx4700.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include <sound/ak4641.h>
#include <video/platform_lcd.h>
@@ -151,15 +150,6 @@ static unsigned long hx4700_pin_config[] __initdata = {
GPIO66_GPIO, /* nSDIO_IRQ */
};
-/*
- * IRDA
- */
-
-static struct pxaficp_platform_data ficp_info = {
- .gpio_pwdown = GPIO105_HX4700_nIR_ON,
- .transceiver_cap = IR_SIRMODE | IR_OFF,
-};
-
/*
* GPIO Keys
*/
@@ -891,7 +881,6 @@ static void __init hx4700_init(void)
platform_add_devices(devices, ARRAY_SIZE(devices));
pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup));
- pxa_set_ficp_info(&ficp_info);
pxa27x_set_i2c_power_info(NULL);
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info));
diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
index 5c645600d401..e38c7ee019f8 100644
--- a/arch/arm/mach-pxa/include/mach/eseries-gpio.h
+++ b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
@@ -38,9 +38,6 @@
#define GPIO_E800_PCMCIA_PWR0 20
#define GPIO_E800_PCMCIA_PWR1 73
-/* e7xx IrDA power control */
-#define GPIO_E7XX_IR_OFF 38
-
/* e740 audio control GPIOs */
#define GPIO_E740_WM9705_nAVDD2 16
#define GPIO_E740_MIC_ON 40
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 6fc40bc06910..f13ba9b9f83e 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -42,7 +42,6 @@
#include <mach/audio.h>
#include <linux/platform_data/video-pxafb.h>
#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/smemc.h>
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index e2411971422d..574897eae2a3 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -49,7 +49,6 @@
#include <mach/audio.h>
#include <mach/lubbock.h>
#include "udc.h"
-#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/video-pxafb.h>
#include <linux/platform_data/mmc-pxamci.h>
#include "pm.h"
@@ -455,26 +454,6 @@ static struct pxamci_platform_data lubbock_mci_platform_data = {
.exit = lubbock_mci_exit,
};
-static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- if (mode & IR_SIRMODE) {
- lubbock_set_misc_wr(BIT(4), 0);
- } else if (mode & IR_FIRMODE) {
- lubbock_set_misc_wr(BIT(4), BIT(4));
- }
- pxa2xx_transceiver_mode(dev, mode);
- local_irq_restore(flags);
-}
-
-static struct pxaficp_platform_data lubbock_ficp_platform_data = {
- .gpio_pwdown = -1,
- .transceiver_cap = IR_SIRMODE | IR_FIRMODE,
- .transceiver_mode = lubbock_irda_transceiver_mode,
-};
-
static void __init lubbock_init(void)
{
int flashboot = (LUB_CONF_SWITCHES & 1);
@@ -500,7 +479,6 @@ static void __init lubbock_init(void)
pxa_set_udc_info(&udc_info);
pxa_set_fb_info(NULL, &sharp_lm8v31);
pxa_set_mci_info(&lubbock_mci_platform_data);
- pxa_set_ficp_info(&lubbock_ficp_platform_data);
pxa_set_ac97_info(NULL);
lubbock_flash_data[0].width = lubbock_flash_data[1].width =
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index cd9fa465b9b2..4471855ffaff 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -38,7 +38,6 @@
#include <mach/magician.h>
#include <linux/platform_data/video-pxafb.h>
#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <linux/regulator/max1586.h>
@@ -123,16 +122,6 @@ static unsigned long magician_pin_config[] __initdata = {
GPIO115_GPIO, /* nPEN_IRQ */
};
-/*
- * IrDA
- */
-
-static struct pxaficp_platform_data magician_ficp_info = {
- .gpio_pwdown = GPIO83_MAGICIAN_nIR_EN,
- .transceiver_cap = IR_SIRMODE | IR_OFF,
- .gpio_pwdown_inverted = 0,
-};
-
/*
* GPIO Keys
*/
@@ -1001,7 +990,6 @@ static void __init magician_init(void)
pwm_add_table(magician_pwm_lookup, ARRAY_SIZE(magician_pwm_lookup));
- pxa_set_ficp_info(&magician_ficp_info);
pxa27x_set_i2c_power_info(&magician_i2c_power_info);
pxa_set_i2c_info(&i2c_info);
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index d237bd030238..603af99c660a 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -49,7 +49,6 @@
#include <mach/audio.h>
#include <linux/platform_data/video-pxafb.h>
#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/smemc.h>
@@ -360,31 +359,6 @@ static struct pxamci_platform_data mainstone_mci_platform_data = {
.exit = mainstone_mci_exit,
};
-static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- if (mode & IR_SIRMODE) {
- MST_MSCWR1 &= ~MST_MSCWR1_IRDA_FIR;
- } else if (mode & IR_FIRMODE) {
- MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR;
- }
- pxa2xx_transceiver_mode(dev, mode);
- if (mode & IR_OFF) {
- MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF;
- } else {
- MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_FULL;
- }
- local_irq_restore(flags);
-}
-
-static struct pxaficp_platform_data mainstone_ficp_platform_data = {
- .gpio_pwdown = -1,
- .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
- .transceiver_mode = mainstone_irda_transceiver_mode,
-};
-
static struct gpio_keys_button gpio_keys_button[] = {
[0] = {
.desc = "wakeup",
@@ -596,7 +570,6 @@ static void __init mainstone_init(void)
mainstone_backlight_register();
pxa_set_mci_info(&mainstone_mci_platform_data);
- pxa_set_ficp_info(&mainstone_ficp_platform_data);
pxa_set_ohci_info(&mainstone_ohci_platform_data);
pxa_set_i2c_info(NULL);
pxa_set_ac97_info(&mst_audio_ops);
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index 6230381a7ca0..9bb2f892d7a9 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -28,7 +28,6 @@
#include <mach/audio.h>
#include <linux/platform_data/mmc-pxamci.h>
#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include "udc.h"
#include <linux/platform_data/asoc-palm27x.h>
#include "palm27x.h"
@@ -189,21 +188,6 @@ void __init palm27x_udc_init(int vbus, int pullup, int vbus_inverted)
}
#endif
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
-static struct pxaficp_platform_data palm27x_ficp_platform_data = {
- .transceiver_cap = IR_SIRMODE | IR_OFF,
-};
-
-void __init palm27x_irda_init(int pwdn)
-{
- palm27x_ficp_platform_data.gpio_pwdown = pwdn;
- pxa_set_ficp_info(&palm27x_ficp_platform_data);
-}
-#endif
-
/******************************************************************************
* WM97xx audio, battery
******************************************************************************/
diff --git a/arch/arm/mach-pxa/palm27x.h b/arch/arm/mach-pxa/palm27x.h
index bd3075bbb3aa..7985a608db55 100644
--- a/arch/arm/mach-pxa/palm27x.h
+++ b/arch/arm/mach-pxa/palm27x.h
@@ -41,12 +41,6 @@ extern void __init palm27x_udc_init(int vbus, int pullup,
static inline void palm27x_udc_init(int vbus, int pullup, int vbus_inverted) {}
#endif
-#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
-extern void __init palm27x_irda_init(int pwdn);
-#else
-static inline void palm27x_irda_init(int pwdn) {}
-#endif
-
#if defined(CONFIG_TOUCHSCREEN_WM97XX) || \
defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE)
extern void __init palm27x_ac97_init(int minv, int maxv, int jack,
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 5f73716a77f0..8e780d1103e5 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -33,7 +33,6 @@
#include <mach/palmld.h>
#include <linux/platform_data/mmc-pxamci.h>
#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/keypad-pxa27x.h>
#include <linux/platform_data/asoc-palm27x.h>
#include "palm27x.h"
@@ -351,7 +350,6 @@ static void __init palmld_init(void)
palm27x_mmc_init(&palmld_mci_gpio_table);
palm27x_pm_init(PALMLD_STR_BASE);
palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
- palm27x_irda_init(GPIO_NR_PALMLD_IR_DISABLE);
palm27x_ac97_init(PALMLD_BAT_MIN_VOLTAGE, PALMLD_BAT_MAX_VOLTAGE,
GPIO_NR_PALMLD_EARPHONE_DETECT, 95);
palm27x_pwm_init(GPIO_NR_PALMLD_BL_POWER, GPIO_NR_PALMLD_LCD_POWER);
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 7c7cbb4e677e..858e805dd0b0 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -33,7 +33,6 @@
#include "palmt5.h"
#include <linux/platform_data/mmc-pxamci.h>
#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/keypad-pxa27x.h>
#include "udc.h"
#include <linux/platform_data/asoc-palm27x.h>
@@ -202,7 +201,6 @@ static void __init palmt5_init(void)
palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
palm27x_udc_init(GPIO_NR_PALMT5_USB_DETECT_N,
GPIO_NR_PALMT5_USB_PULLUP, 1);
- palm27x_irda_init(GPIO_NR_PALMT5_IR_DISABLE);
palm27x_ac97_init(PALMT5_BAT_MIN_VOLTAGE, PALMT5_BAT_MAX_VOLTAGE,
GPIO_NR_PALMT5_EARPHONE_DETECT, 95);
palm27x_pwm_init(GPIO_NR_PALMT5_BL_POWER, GPIO_NR_PALMT5_LCD_POWER);
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 455cb8ccaf26..6961bc61b485 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -33,7 +33,6 @@
#include <mach/palmtc.h>
#include <linux/platform_data/mmc-pxamci.h>
#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include "udc.h"
#include "generic.h"
@@ -211,23 +210,6 @@ static void __init palmtc_pwm_init(void)
static inline void palmtc_pwm_init(void) {}
#endif
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
-static struct pxaficp_platform_data palmtc_ficp_platform_data = {
- .gpio_pwdown = GPIO_NR_PALMTC_IR_DISABLE,
- .transceiver_cap = IR_SIRMODE | IR_OFF,
-};
-
-static void __init palmtc_irda_init(void)
-{
- pxa_set_ficp_info(&palmtc_ficp_platform_data);
-}
-#else
-static inline void palmtc_irda_init(void) {}
-#endif
-
/******************************************************************************
* Keyboard
******************************************************************************/
@@ -518,7 +500,6 @@ static void __init palmtc_init(void)
palmtc_mmc_init();
palmtc_keys_init();
palmtc_pwm_init();
- palmtc_irda_init();
palmtc_mkp_init();
palmtc_udc_init();
palmtc_ts_init();
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index a2b10db4aacc..1d8f47dc93f0 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -33,7 +33,6 @@
#include "palmte2.h"
#include <linux/platform_data/mmc-pxamci.h>
#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include "udc.h"
#include <linux/platform_data/asoc-palm27x.h>
@@ -188,14 +187,6 @@ static struct platform_device palmte2_backlight = {
},
};
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data palmte2_ficp_platform_data = {
- .gpio_pwdown = GPIO_NR_PALMTE2_IR_DISABLE,
- .transceiver_cap = IR_SIRMODE | IR_OFF,
-};
-
/******************************************************************************
* UDC
******************************************************************************/
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index 2bf0f7f3ea24..c31a0017d17f 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -33,7 +33,6 @@
#include "palmtreo.h"
#include <linux/platform_data/mmc-pxamci.h>
#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/keypad-pxa27x.h>
#include "udc.h"
#include <linux/platform_data/usb-ohci-pxa27x.h>
@@ -417,7 +416,6 @@ static void __init palmphone_common_init(void)
palm27x_pm_init(TREO_STR_BASE);
palm27x_lcd_init(GPIO_NR_TREO_BL_POWER, &palm_320x320_new_lcd_mode);
palm27x_udc_init(GPIO_NR_TREO_USB_DETECT, GPIO_NR_TREO_USB_PULLUP, 1);
- palm27x_irda_init(GPIO_NR_TREO_IR_EN);
palm27x_ac97_init(-1, -1, -1, 95);
palm27x_pwm_init(GPIO_NR_TREO_BL_POWER, -1);
palm27x_power_init(GPIO_NR_TREO_POWER_DETECT, -1);
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 07332c92c9f7..288e2bcf20c3 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -36,7 +36,6 @@
#include <mach/palmtx.h>
#include <linux/platform_data/mmc-pxamci.h>
#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/keypad-pxa27x.h>
#include "udc.h"
#include <linux/platform_data/asoc-palm27x.h>
@@ -357,7 +356,6 @@ static void __init palmtx_init(void)
palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
palm27x_udc_init(GPIO_NR_PALMTX_USB_DETECT_N,
GPIO_NR_PALMTX_USB_PULLUP, 1);
- palm27x_irda_init(GPIO_NR_PALMTX_IR_DISABLE);
palm27x_ac97_init(PALMTX_BAT_MIN_VOLTAGE, PALMTX_BAT_MAX_VOLTAGE,
GPIO_NR_PALMTX_EARPHONE_DETECT, 95);
palm27x_pwm_init(GPIO_NR_PALMTX_BL_POWER, GPIO_NR_PALMTX_LCD_POWER);
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index b4a5fe02a0af..a7dc9bc6186b 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -38,7 +38,6 @@
#include "palmz72.h"
#include <linux/platform_data/mmc-pxamci.h>
#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/keypad-pxa27x.h>
#include "udc.h"
#include <linux/platform_data/asoc-palm27x.h>
@@ -297,7 +296,6 @@ static void __init palmz72_init(void)
palm27x_lcd_init(-1, &palm_320x320_lcd_mode);
palm27x_udc_init(GPIO_NR_PALMZ72_USB_DETECT_N,
GPIO_NR_PALMZ72_USB_PULLUP, 0);
- palm27x_irda_init(GPIO_NR_PALMZ72_IR_DISABLE);
palm27x_ac97_init(PALMZ72_BAT_MIN_VOLTAGE, PALMZ72_BAT_MAX_VOLTAGE,
-1, 113);
palm27x_pwm_init(-1, -1);
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 3a4ecc3c8f8b..c4c8c3dc1e5b 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -42,7 +42,6 @@
#include "pxa25x.h"
#include <linux/platform_data/mmc-pxamci.h>
#include "udc.h"
-#include <linux/platform_data/irda-pxaficp.h>
#include <mach/poodle.h>
#include <linux/platform_data/video-pxafb.h>
@@ -299,15 +298,6 @@ static struct gpiod_lookup_table poodle_mci_gpio_table = {
},
};
-/*
- * Irda
- */
-static struct pxaficp_platform_data poodle_ficp_platform_data = {
- .gpio_pwdown = POODLE_GPIO_IR_ON,
- .transceiver_cap = IR_SIRMODE | IR_OFF,
-};
-
-
/*
* USB Device Controller
*/
@@ -446,7 +436,6 @@ static void __init poodle_init(void)
pxa_set_udc_info(&udc_info);
gpiod_add_lookup_table(&poodle_mci_gpio_table);
pxa_set_mci_info(&poodle_mci_platform_data);
- pxa_set_ficp_info(&poodle_ficp_platform_data);
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(poodle_i2c_devices));
poodle_init_spi();
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
index 2d26cd2afbf3..973b1fbde63e 100644
--- a/arch/arm/mach-pxa/pxa2xx.c
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -16,38 +16,9 @@
#include <mach/pxa2xx-regs.h>
#include "mfp-pxa25x.h"
#include <mach/reset.h>
-#include <linux/platform_data/irda-pxaficp.h>
void pxa2xx_clear_reset_status(unsigned int mask)
{
/* RESET_STATUS_* has a 1:1 mapping with RCSR */
RCSR = mask;
}
-
-static unsigned long pxa2xx_mfp_fir[] = {
- GPIO46_FICP_RXD,
- GPIO47_FICP_TXD,
-};
-
-static unsigned long pxa2xx_mfp_sir[] = {
- GPIO46_STUART_RXD,
- GPIO47_STUART_TXD,
-};
-
-static unsigned long pxa2xx_mfp_off[] = {
- GPIO46_GPIO | MFP_LPM_DRIVE_LOW,
- GPIO47_GPIO | MFP_LPM_DRIVE_LOW,
-};
-
-void pxa2xx_transceiver_mode(struct device *dev, int mode)
-{
- if (mode & IR_OFF) {
- pxa2xx_mfp_config(pxa2xx_mfp_off, ARRAY_SIZE(pxa2xx_mfp_off));
- } else if (mode & IR_SIRMODE) {
- pxa2xx_mfp_config(pxa2xx_mfp_sir, ARRAY_SIZE(pxa2xx_mfp_sir));
- } else if (mode & IR_FIRMODE) {
- pxa2xx_mfp_config(pxa2xx_mfp_fir, ARRAY_SIZE(pxa2xx_mfp_fir));
- } else
- BUG();
-}
-EXPORT_SYMBOL_GPL(pxa2xx_transceiver_mode);
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 371008e9bb02..8c4aef0cbd1f 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -40,7 +40,6 @@
#include "pxa27x.h"
#include "pxa27x-udc.h"
#include <mach/reset.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/mmc-pxamci.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <linux/platform_data/video-pxafb.h>
@@ -691,27 +690,6 @@ static void __init spitz_uhc_init(void)
static inline void spitz_uhc_init(void) {}
#endif
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-#if defined(CONFIG_PXA_FICP) || defined(CONFIG_PXA_FICP_MODULE)
-static struct pxaficp_platform_data spitz_ficp_platform_data = {
- .transceiver_cap = IR_SIRMODE | IR_OFF,
-};
-
-static void __init spitz_irda_init(void)
-{
- if (machine_is_akita())
- spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON;
- else
- spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
-
- pxa_set_ficp_info(&spitz_ficp_platform_data);
-}
-#else
-static inline void spitz_irda_init(void) {}
-#endif
-
/******************************************************************************
* Framebuffer
******************************************************************************/
@@ -1015,7 +993,6 @@ static void __init spitz_init(void)
spitz_leds_init();
spitz_mmc_init();
spitz_pcmcia_init();
- spitz_irda_init();
spitz_uhc_init();
spitz_lcd_init();
spitz_nor_init();
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 431709725d02..fe3393f1f50a 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -41,7 +41,6 @@
#include "pxa25x.h"
#include <mach/reset.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/mmc-pxamci.h>
#include "udc.h"
#include "tosa_bt.h"
@@ -304,68 +303,6 @@ static struct gpiod_lookup_table tosa_mci_gpio_table = {
},
};
-/*
- * Irda
- */
-static void tosa_irda_transceiver_mode(struct device *dev, int mode)
-{
- if (mode & IR_OFF) {
- gpio_set_value(TOSA_GPIO_IR_POWERDWN, 0);
- pxa2xx_transceiver_mode(dev, mode);
- gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
- } else {
- pxa2xx_transceiver_mode(dev, mode);
- gpio_set_value(TOSA_GPIO_IR_POWERDWN, 1);
- }
-}
-
-static int tosa_irda_startup(struct device *dev)
-{
- int ret;
-
- ret = gpio_request(TOSA_GPIO_IRDA_TX, "IrDA TX");
- if (ret)
- goto err_tx;
- ret = gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
- if (ret)
- goto err_tx_dir;
-
- ret = gpio_request(TOSA_GPIO_IR_POWERDWN, "IrDA powerdown");
- if (ret)
- goto err_pwr;
-
- ret = gpio_direction_output(TOSA_GPIO_IR_POWERDWN, 0);
- if (ret)
- goto err_pwr_dir;
-
- tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
-
- return 0;
-
-err_pwr_dir:
- gpio_free(TOSA_GPIO_IR_POWERDWN);
-err_pwr:
-err_tx_dir:
- gpio_free(TOSA_GPIO_IRDA_TX);
-err_tx:
- return ret;
-}
-
-static void tosa_irda_shutdown(struct device *dev)
-{
- tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
- gpio_free(TOSA_GPIO_IR_POWERDWN);
- gpio_free(TOSA_GPIO_IRDA_TX);
-}
-
-static struct pxaficp_platform_data tosa_ficp_platform_data = {
- .gpio_pwdown = -1,
- .transceiver_cap = IR_SIRMODE | IR_OFF,
- .transceiver_mode = tosa_irda_transceiver_mode,
- .startup = tosa_irda_startup,
- .shutdown = tosa_irda_shutdown,
-};
-
/*
* Tosa AC IN
*/
@@ -945,7 +882,6 @@ static void __init tosa_init(void)
gpiod_add_lookup_table(&tosa_mci_gpio_table);
pxa_set_mci_info(&tosa_mci_platform_data);
- pxa_set_ficp_info(&tosa_ficp_platform_data);
pxa_set_i2c_info(NULL);
pxa_set_ac97_info(NULL);
platform_scoop_config = &tosa_pcmcia_config;
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index f76f8be09554..4bd426b13515 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -44,18 +44,12 @@
#include <mach/audio.h>
#include <linux/platform_data/video-pxafb.h>
#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/smemc.h>
#include "generic.h"
#include "devices.h"
-/* comment out the following line if you want to use the
- * Standard UART from PXA for serial / irda transmission
- * and acivate it if you have status leds connected */
-#define STATUS_LEDS_ON_STUART_PINS 1
-
/*****************************************************************************
* MultiFunctionPins of CPU
*****************************************************************************/
@@ -94,13 +88,8 @@ static unsigned long trizeps4_pin_config[] __initdata = {
GPIO43_BTUART_TXD,
GPIO44_BTUART_CTS,
GPIO45_BTUART_RTS,
-#ifdef STATUS_LEDS_ON_STUART_PINS
GPIO46_GPIO,
GPIO47_GPIO,
-#else
- GPIO46_STUART_RXD,
- GPIO47_STUART_TXD,
-#endif
/* PCMCIA */
GPIO11_GPIO, /* TRIZEPS4_CD_IRQ */
GPIO13_GPIO, /* TRIZEPS4_READY_NINT */
@@ -233,7 +222,6 @@ static struct platform_device dm9000_device = {
* LED's on GPIO pins of PXA
****************************************************************************/
static struct gpio_led trizeps4_led[] = {
-#ifdef STATUS_LEDS_ON_STUART_PINS
{
.name = "led0:orange:heartbeat", /* */
.default_trigger = "heartbeat",
@@ -246,7 +234,6 @@ static struct gpio_led trizeps4_led[] = {
.gpio = GPIO_SYS_BUSY_LED,
.active_low = 1,
},
-#endif
};
static struct gpio_led_platform_data trizeps4_led_data = {
@@ -354,57 +341,6 @@ static struct pxamci_platform_data trizeps4_mci_platform_data = {
.setpower = NULL, /* power-switching not supported */
};
-/****************************************************************************
- * IRDA mode switching on stuart
- ****************************************************************************/
-#ifndef STATUS_LEDS_ON_STUART_PINS
-static short trizeps_conxs_ircr;
-
-static int trizeps4_irda_startup(struct device *dev)
-{
- trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
- IRCR_writew(trizeps_conxs_ircr);
- return 0;
-}
-
-static void trizeps4_irda_shutdown(struct device *dev)
-{
- trizeps_conxs_ircr |= ConXS_IRCR_SD;
- IRCR_writew(trizeps_conxs_ircr);
-}
-
-static void trizeps4_irda_transceiver_mode(struct device *dev, int mode)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- /* Switch mode */
- if (mode & IR_SIRMODE)
- trizeps_conxs_ircr &= ~ConXS_IRCR_MODE; /* Slow mode */
- else if (mode & IR_FIRMODE)
- trizeps_conxs_ircr |= ConXS_IRCR_MODE; /* Fast mode */
-
- /* Switch power */
- if (mode & IR_OFF)
- trizeps_conxs_ircr |= ConXS_IRCR_SD;
- else
- trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
-
- IRCR_writew(trizeps_conxs_ircr);
- local_irq_restore(flags);
-
- pxa2xx_transceiver_mode(dev, mode);
-}
-
-static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
- .gpio_pwdown = -1,
- .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
- .transceiver_mode = trizeps4_irda_transceiver_mode,
- .startup = trizeps4_irda_startup,
- .shutdown = trizeps4_irda_shutdown,
-};
-#endif
-
/****************************************************************************
* OHCI USB port
****************************************************************************/
@@ -516,9 +452,6 @@ static void __init trizeps4_init(void)
pxa_set_fb_info(NULL, &toshiba_lcd);
pxa_set_mci_info(&trizeps4_mci_platform_data);
-#ifndef STATUS_LEDS_ON_STUART_PINS
- pxa_set_ficp_info(&trizeps4_ficp_platform_data);
-#endif
pxa_set_ohci_info(&trizeps4_ohci_platform_data);
pxa_set_ac97_info(NULL);
pxa_set_i2c_info(NULL);
diff --git a/include/linux/platform_data/irda-pxaficp.h b/include/linux/platform_data/irda-pxaficp.h
deleted file mode 100644
index bd35ddcf3068..000000000000
--- a/include/linux/platform_data/irda-pxaficp.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef ASMARM_ARCH_IRDA_H
-#define ASMARM_ARCH_IRDA_H
-
-/* board specific transceiver capabilities */
-
-#define IR_OFF 1
-#define IR_SIRMODE 2
-#define IR_FIRMODE 4
-
-struct pxaficp_platform_data {
- int transceiver_cap;
- void (*transceiver_mode)(struct device *dev, int mode);
- int (*startup)(struct device *dev);
- void (*shutdown)(struct device *dev);
- int gpio_pwdown; /* powerdown GPIO for the IrDA chip */
- bool gpio_pwdown_inverted; /* gpio_pwdown is inverted */
-};
-
-extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);
-
-#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
-void pxa2xx_transceiver_mode(struct device *dev, int mode);
-#endif
-
-#endif
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] arm: pxa: remove dead and obsolete IrDA initialization
2021-12-29 18:48 ` Lukas Bulwahn
@ 2021-12-30 19:27 ` kernel test robot
-1 siblings, 0 replies; 6+ messages in thread
From: kernel test robot @ 2021-12-30 19:27 UTC (permalink / raw)
To: Lukas Bulwahn, Daniel Mack, Haojian Zhuang, Robert Jarzmik,
Russell King, Philipp Zabel, Paul Parsons, Marek Vasut,
Tomas Cech, Sergey Lapin, linux-arm-kernel
Cc: kbuild-all
Hi Lukas,
I love your patch! Yet something to improve:
[auto build test ERROR on soc/for-next]
[also build test ERROR on arm/for-next linus/master v5.16-rc7 next-20211224]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Lukas-Bulwahn/arm-pxa-remove-dead-and-obsolete-IrDA-initialization/20211230-025045
base: https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git for-next
config: arm-pxa_defconfig (https://download.01.org/0day-ci/archive/20211231/202112310355.45rFu4Q6-lkp@intel.com/config)
compiler: arm-linux-gnueabi-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/6f71d3b32457eecd17d8e4abec5584d0c0c60ce4
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Lukas-Bulwahn/arm-pxa-remove-dead-and-obsolete-IrDA-initialization/20211230-025045
git checkout 6f71d3b32457eecd17d8e4abec5584d0c0c60ce4
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=arm SHELL=/bin/bash
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
arch/arm/mach-pxa/palmte2.c: In function 'palmte2_init':
>> arch/arm/mach-pxa/palmte2.c:358:9: error: implicit declaration of function 'pxa_set_ficp_info'; did you mean 'pxa_set_i2c_info'? [-Werror=implicit-function-declaration]
358 | pxa_set_ficp_info(&palmte2_ficp_platform_data);
| ^~~~~~~~~~~~~~~~~
| pxa_set_i2c_info
>> arch/arm/mach-pxa/palmte2.c:358:28: error: 'palmte2_ficp_platform_data' undeclared (first use in this function); did you mean 'palmte2_mci_platform_data'?
358 | pxa_set_ficp_info(&palmte2_ficp_platform_data);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
| palmte2_mci_platform_data
arch/arm/mach-pxa/palmte2.c:358:28: note: each undeclared identifier is reported only once for each function it appears in
cc1: some warnings being treated as errors
vim +358 arch/arm/mach-pxa/palmte2.c
8c8aa5fa3060ab Marek Vasut 2009-03-24 344
54088bf50f31e5 Marek Vasut 2009-03-24 345 static void __init palmte2_init(void)
54088bf50f31e5 Marek Vasut 2009-03-24 346 {
54088bf50f31e5 Marek Vasut 2009-03-24 347 pxa2xx_mfp_config(ARRAY_AND_SIZE(palmte2_pin_config));
54088bf50f31e5 Marek Vasut 2009-03-24 348
cc155c6f2cc705 Russell King 2009-11-09 349 pxa_set_ffuart_info(NULL);
cc155c6f2cc705 Russell King 2009-11-09 350 pxa_set_btuart_info(NULL);
cc155c6f2cc705 Russell King 2009-11-09 351 pxa_set_stuart_info(NULL);
cc155c6f2cc705 Russell King 2009-11-09 352
4321e1a12b811c Russell King - ARM Linux 2011-02-15 353 pxa_set_fb_info(NULL, &palmte2_lcd_screen);
32d1544880aa87 Linus Walleij 2018-12-02 354 gpiod_add_lookup_table(&palmte2_mci_gpio_table);
54088bf50f31e5 Marek Vasut 2009-03-24 355 pxa_set_mci_info(&palmte2_mci_platform_data);
8c8aa5fa3060ab Marek Vasut 2009-03-24 356 palmte2_udc_init();
241cf473114fed Marek Vasut 2010-06-04 357 pxa_set_ac97_info(&palmte2_ac97_pdata);
8c8aa5fa3060ab Marek Vasut 2009-03-24 @358 pxa_set_ficp_info(&palmte2_ficp_platform_data);
54088bf50f31e5 Marek Vasut 2009-03-24 359
f5a3b55287dd57 Thierry Reding 2015-10-05 360 pwm_add_table(palmte2_pwm_lookup, ARRAY_SIZE(palmte2_pwm_lookup));
fdabc466f335bc Linus Walleij 2020-01-23 361 gpiod_add_lookup_table(&palmte2_udc_gpiod_table);
54088bf50f31e5 Marek Vasut 2009-03-24 362 platform_add_devices(devices, ARRAY_SIZE(devices));
54088bf50f31e5 Marek Vasut 2009-03-24 363 }
54088bf50f31e5 Marek Vasut 2009-03-24 364
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] arm: pxa: remove dead and obsolete IrDA initialization
@ 2021-12-30 19:27 ` kernel test robot
0 siblings, 0 replies; 6+ messages in thread
From: kernel test robot @ 2021-12-30 19:27 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 4521 bytes --]
Hi Lukas,
I love your patch! Yet something to improve:
[auto build test ERROR on soc/for-next]
[also build test ERROR on arm/for-next linus/master v5.16-rc7 next-20211224]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Lukas-Bulwahn/arm-pxa-remove-dead-and-obsolete-IrDA-initialization/20211230-025045
base: https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git for-next
config: arm-pxa_defconfig (https://download.01.org/0day-ci/archive/20211231/202112310355.45rFu4Q6-lkp(a)intel.com/config)
compiler: arm-linux-gnueabi-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/6f71d3b32457eecd17d8e4abec5584d0c0c60ce4
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Lukas-Bulwahn/arm-pxa-remove-dead-and-obsolete-IrDA-initialization/20211230-025045
git checkout 6f71d3b32457eecd17d8e4abec5584d0c0c60ce4
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=arm SHELL=/bin/bash
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
arch/arm/mach-pxa/palmte2.c: In function 'palmte2_init':
>> arch/arm/mach-pxa/palmte2.c:358:9: error: implicit declaration of function 'pxa_set_ficp_info'; did you mean 'pxa_set_i2c_info'? [-Werror=implicit-function-declaration]
358 | pxa_set_ficp_info(&palmte2_ficp_platform_data);
| ^~~~~~~~~~~~~~~~~
| pxa_set_i2c_info
>> arch/arm/mach-pxa/palmte2.c:358:28: error: 'palmte2_ficp_platform_data' undeclared (first use in this function); did you mean 'palmte2_mci_platform_data'?
358 | pxa_set_ficp_info(&palmte2_ficp_platform_data);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
| palmte2_mci_platform_data
arch/arm/mach-pxa/palmte2.c:358:28: note: each undeclared identifier is reported only once for each function it appears in
cc1: some warnings being treated as errors
vim +358 arch/arm/mach-pxa/palmte2.c
8c8aa5fa3060ab Marek Vasut 2009-03-24 344
54088bf50f31e5 Marek Vasut 2009-03-24 345 static void __init palmte2_init(void)
54088bf50f31e5 Marek Vasut 2009-03-24 346 {
54088bf50f31e5 Marek Vasut 2009-03-24 347 pxa2xx_mfp_config(ARRAY_AND_SIZE(palmte2_pin_config));
54088bf50f31e5 Marek Vasut 2009-03-24 348
cc155c6f2cc705 Russell King 2009-11-09 349 pxa_set_ffuart_info(NULL);
cc155c6f2cc705 Russell King 2009-11-09 350 pxa_set_btuart_info(NULL);
cc155c6f2cc705 Russell King 2009-11-09 351 pxa_set_stuart_info(NULL);
cc155c6f2cc705 Russell King 2009-11-09 352
4321e1a12b811c Russell King - ARM Linux 2011-02-15 353 pxa_set_fb_info(NULL, &palmte2_lcd_screen);
32d1544880aa87 Linus Walleij 2018-12-02 354 gpiod_add_lookup_table(&palmte2_mci_gpio_table);
54088bf50f31e5 Marek Vasut 2009-03-24 355 pxa_set_mci_info(&palmte2_mci_platform_data);
8c8aa5fa3060ab Marek Vasut 2009-03-24 356 palmte2_udc_init();
241cf473114fed Marek Vasut 2010-06-04 357 pxa_set_ac97_info(&palmte2_ac97_pdata);
8c8aa5fa3060ab Marek Vasut 2009-03-24 @358 pxa_set_ficp_info(&palmte2_ficp_platform_data);
54088bf50f31e5 Marek Vasut 2009-03-24 359
f5a3b55287dd57 Thierry Reding 2015-10-05 360 pwm_add_table(palmte2_pwm_lookup, ARRAY_SIZE(palmte2_pwm_lookup));
fdabc466f335bc Linus Walleij 2020-01-23 361 gpiod_add_lookup_table(&palmte2_udc_gpiod_table);
54088bf50f31e5 Marek Vasut 2009-03-24 362 platform_add_devices(devices, ARRAY_SIZE(devices));
54088bf50f31e5 Marek Vasut 2009-03-24 363 }
54088bf50f31e5 Marek Vasut 2009-03-24 364
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] arm: pxa: remove dead and obsolete IrDA initialization
2021-12-29 18:48 ` Lukas Bulwahn
@ 2022-01-03 12:05 ` Linus Walleij
-1 siblings, 0 replies; 6+ messages in thread
From: Linus Walleij @ 2022-01-03 12:05 UTC (permalink / raw)
To: Lukas Bulwahn
Cc: Daniel Mack, Haojian Zhuang, Robert Jarzmik, Russell King,
Philipp Zabel, Paul Parsons, Marek Vasut, Tomas Cech,
Sergey Lapin, linux-arm-kernel, kernel-janitors, linux-kernel
On Wed, Dec 29, 2021 at 7:51 PM Lukas Bulwahn <lukas.bulwahn@gmail.com> wrote:
> Commit d64c2a76123f ("staging: irda: remove the irda network stack and
> drivers") removes the Intel PXA2xx Internal FICP driver, and the config
> PXA_FICP and the config IRDA.
>
> Further, this removes any proper effect from the setup functions in the
> file ./include/linux/platform_data/irda-pxaficp.h. So, delete all users
> in arch/arm/mach-pxa/ and this header file.
>
> Clean up radically various left-over of IRDA in the ./arch/arm/mach-pxa.
>
> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
I see there is some noise from the kernel test robot about some missed
lines of code, but with this fixed:
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
IIUC the future for IrDA is in BPF for the people who want it, so if someone
wants this they need to go and fix it that way.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] arm: pxa: remove dead and obsolete IrDA initialization
@ 2022-01-03 12:05 ` Linus Walleij
0 siblings, 0 replies; 6+ messages in thread
From: Linus Walleij @ 2022-01-03 12:05 UTC (permalink / raw)
To: Lukas Bulwahn
Cc: Daniel Mack, Haojian Zhuang, Robert Jarzmik, Russell King,
Philipp Zabel, Paul Parsons, Marek Vasut, Tomas Cech,
Sergey Lapin, linux-arm-kernel, kernel-janitors, linux-kernel
On Wed, Dec 29, 2021 at 7:51 PM Lukas Bulwahn <lukas.bulwahn@gmail.com> wrote:
> Commit d64c2a76123f ("staging: irda: remove the irda network stack and
> drivers") removes the Intel PXA2xx Internal FICP driver, and the config
> PXA_FICP and the config IRDA.
>
> Further, this removes any proper effect from the setup functions in the
> file ./include/linux/platform_data/irda-pxaficp.h. So, delete all users
> in arch/arm/mach-pxa/ and this header file.
>
> Clean up radically various left-over of IRDA in the ./arch/arm/mach-pxa.
>
> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
I see there is some noise from the kernel test robot about some missed
lines of code, but with this fixed:
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
IIUC the future for IrDA is in BPF for the people who want it, so if someone
wants this they need to go and fix it that way.
Yours,
Linus Walleij
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-01-03 12:08 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-29 18:48 [PATCH] arm: pxa: remove dead and obsolete IrDA initialization Lukas Bulwahn
2021-12-29 18:48 ` Lukas Bulwahn
2021-12-30 19:27 ` kernel test robot
2021-12-30 19:27 ` kernel test robot
2022-01-03 12:05 ` Linus Walleij
2022-01-03 12:05 ` Linus Walleij
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.