All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH V2] pinctrl: qcom: Add msm8994 pinctrl driver
@ 2016-10-26 23:32 Michael Scott
  2016-10-27  1:09 ` Jeremy McNicoll
                   ` (3 more replies)
  0 siblings, 4 replies; 8+ messages in thread
From: Michael Scott @ 2016-10-26 23:32 UTC (permalink / raw)
  To: linux-gpio, linux-arm-msm, devicetree, linux-kernel
  Cc: Linus Walleij, Rob Herring, Mark Rutland, Andy Gross,
	David Brown, Bjorn Andersson, Joonwoo Park, Jeremy McNicoll,
	Michael Scott

Initial pinctrl driver for QCOM msm8994 platforms.

In order to continue the initial board support for QCOM msm8994/msm8992
presented in patches from Jeremy McNicoll <jeremymc@redhat.com>, let's put
a proper pinctrl driver in place.

Currently, the DT for these platforms uses the msm8x74 pinctrl driver to enable
basic UART.  Beyond the first few pins the rest are different enough to justify
it's own driver.

Note: This driver is also be used by QCOM's msm8992 platform as it's TLM block
is the same.

- Initial formatting and style was taken from the msm8x74 pinctrl driver added
  by Björn Andersson <bjorn.andersson@linaro.org>
- Data was then adjusted per QCOM MSM8994 documentation for Top Level Multiplexing
- Bindings documentation was based on qcom,msm8996-pinctrl.txt by
  Joonwoo Park <joonwoop@codeaurora.org> and then modified for msm8994 content

Signed-off-by: Michael Scott <michael.scott@linaro.org>
---

V1 -> V2: fixed missing FUNCTION(nav_pps) and removed 3 odd newlines between blsp_i2c4_groups and cci_timer0_groups

 .../bindings/pinctrl/qcom,msm8994-pinctrl.txt      |  175 +++
 drivers/pinctrl/qcom/Kconfig                       |    9 +
 drivers/pinctrl/qcom/Makefile                      |    1 +
 drivers/pinctrl/qcom/pinctrl-msm8994.c             | 1400 ++++++++++++++++++++
 4 files changed, 1585 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt
 create mode 100644 drivers/pinctrl/qcom/pinctrl-msm8994.c

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt
new file mode 100644
index 0000000..e390087b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt
@@ -0,0 +1,175 @@
+Qualcomm MSM8994 TLMM block
+
+This binding describes the Top Level Mode Multiplexer block found in the
+MSM8994 platform.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be "qcom,msm8994-pinctrl"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: the base address and size of the TLMM register space.
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should specify the TLMM summary IRQ.
+
+- interrupt-controller:
+	Usage: required
+	Value type: <none>
+	Definition: identifies this node as an interrupt controller
+
+- #interrupt-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 2. Specifying the pin number and flags, as defined
+		    in <dt-bindings/interrupt-controller/irq.h>
+
+- gpio-controller:
+	Usage: required
+	Value type: <none>
+	Definition: identifies this node as a gpio controller
+
+- #gpio-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 2. Specifying the pin number and flags, as defined
+		    in <dt-bindings/gpio/gpio.h>
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+
+PIN CONFIGURATION NODES:
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+- pins:
+	Usage: required
+	Value type: <string-array>
+	Definition: List of gpio pins affected by the properties specified in
+		    this subnode.
+
+		    Valid pins are:
+		      gpio0-gpio145
+		        Supports mux, bias and drive-strength
+
+		      sdc1_clk, sdc1_cmd, sdc1_data sdc1_rclk, sdc2_clk,
+		      sdc2_cmd, sdc2_data
+		        Supports bias and drive-strength
+
+- function:
+	Usage: required
+	Value type: <string>
+	Definition: Specify the alternative function to be configured for the
+		    specified pins. Functions are only valid for gpio pins.
+		    Valid values are:
+
+		    audio_ref_clk,  blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5,
+		    blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_i2c9, blsp_i2c10, blsp_i2c11,
+		    blsp_i2c12, blsp_spi1, blsp_spi1_cs1, blsp_spi1_cs2, blsp_spi1_cs3,
+		    blsp_spi2, blsp_spi2_cs1, blsp_spi2_cs2, blsp_spi2_cs3, blsp_spi3,
+		    blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, blsp_spi8, blsp_spi9,
+		    blsp_spi10, blsp_spi10_cs1, blsp_spi10_cs2, blsp_spi10_cs3, blsp_spi11,
+		    blsp_spi12, blsp_uart1, blsp_uart2, blsp_uart3, blsp_uart4, blsp_uart5,
+		    blsp_uart6, blsp_uart7, blsp_uart8, blsp_uart9, blsp_uart10, blsp_uart11,
+		    blsp_uart12, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5,
+		    blsp_uim6, blsp_uim7, blsp_uim8, blsp_uim9, blsp_uim10, blsp_uim11,
+		    blsp_uim12, blsp11_i2c_scl_b, blsp11_i2c_sda_b, blsp11_uart_rx_b,
+		    blsp11_uart_tx_b, cam_mclk0, cam_mclk1, cam_mclk2, cam_mclk3,
+		    cci_async_in0, cci_async_in1, cci_async_in2, cci_i2c0, cci_i2c1,
+		    cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, gcc_gp_clk1,
+		    gcc_gp_clk2, gcc_gp_clk3, gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk,
+		    gp1_clk, gps_tx, grfc, gsm_tx, hdmi_cec, hdmi_ddc, hdmi_hpd, mdp_vsync,
+		    mss_lte, nav_pps, nav_tsync, qdss_cti_trig_in_a, qdss_cti_trig_in_b,
+		    qdss_cti_trig_in_c, qdss_cti_trig_in_d, qdss_cti_trig_out_a,
+		    qdss_cti_trig_out_b, qdss_cti_trig_out_c, qdss_cti_trig_out_d,
+		    qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
+		    qdss_tracedata_a, qdss_tracedata_b, qua_mi2s, pci_e0, pci_e1, pri_mi2s,
+		    rffe1, rffe2, rffe3, rffe4, rffe5, rffe6, rffe7, sdc4, sec_mi2s, slimbus,
+		    spkr_mi2s, ter_mi2s, tsif1, tsif2, uim_batt_alarm, uim1, uim2, uim3, uim4,
+		    gpio
+
+- bias-disable:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configued as no pull.
+
+- bias-pull-down:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configued as pull down.
+
+- bias-pull-up:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configued as pull up.
+
+- output-high:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in output mode, driven
+		    high.
+		    Not valid for sdc pins.
+
+- output-low:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in output mode, driven
+		    low.
+		    Not valid for sdc pins.
+
+- drive-strength:
+	Usage: optional
+	Value type: <u32>
+	Definition: Selects the drive strength for the specified pins, in mA.
+		    Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
+
+Example:
+
+	msmgpio: pinctrl@fd510000 {
+		compatible = "qcom,msm8994-pinctrl";
+		reg = <0xfd510000 0x4000>;
+		interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		blsp1_uart2_default: blsp1_uart2_default {
+			pinmux {
+				pins = "gpio4", "gpio5";
+				function = "blsp_uart2";
+			};
+			pinconf {
+				pins = "gpio4", "gpio5";
+				drive-strength = <16>;
+				bias-disable;
+			};
+		};
+	};
diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index 93ef268..3ebdc01 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -79,6 +79,15 @@ config PINCTRL_MSM8916
 	  This is the pinctrl, pinmux, pinconf and gpiolib driver for the
 	  Qualcomm TLMM block found on the Qualcomm 8916 platform.
 
+config PINCTRL_MSM8994
+	tristate "Qualcomm 8994 pin controller driver"
+	depends on GPIOLIB && OF
+	select PINCTRL_MSM
+	help
+	  This is the pinctrl, pinmux, pinconf and gpiolib driver for the
+	  Qualcomm TLMM block found in the Qualcomm 8994 platform. The
+	  Qualcomm 8992 platform is also supported by this driver.
+
 config PINCTRL_MSM8996
 	tristate "Qualcomm MSM8996 pin controller driver"
 	depends on GPIOLIB && OF
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
index 8319e11..ab47764 100644
--- a/drivers/pinctrl/qcom/Makefile
+++ b/drivers/pinctrl/qcom/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_PINCTRL_MSM8660)	+= pinctrl-msm8660.o
 obj-$(CONFIG_PINCTRL_MSM8960)	+= pinctrl-msm8960.o
 obj-$(CONFIG_PINCTRL_MSM8X74)	+= pinctrl-msm8x74.o
 obj-$(CONFIG_PINCTRL_MSM8916)	+= pinctrl-msm8916.o
+obj-$(CONFIG_PINCTRL_MSM8994)   += pinctrl-msm8994.o
 obj-$(CONFIG_PINCTRL_MSM8996)   += pinctrl-msm8996.o
 obj-$(CONFIG_PINCTRL_QDF2XXX)	+= pinctrl-qdf2xxx.o
 obj-$(CONFIG_PINCTRL_MDM9615)	+= pinctrl-mdm9615.o
diff --git a/drivers/pinctrl/qcom/pinctrl-msm8994.c b/drivers/pinctrl/qcom/pinctrl-msm8994.c
new file mode 100644
index 0000000..556eec8
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-msm8994.c
@@ -0,0 +1,1400 @@
+/*
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-msm.h"
+
+#define FUNCTION(fname)					\
+	[MSM_MUX_##fname] = {				\
+		.name = #fname,				\
+		.groups = fname##_groups,		\
+		.ngroups = ARRAY_SIZE(fname##_groups),	\
+	}
+
+#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7, f8, f9, f10, f11)	\
+	{						\
+		.name = "gpio" #id,			\
+		.pins = gpio##id##_pins,		\
+		.npins = ARRAY_SIZE(gpio##id##_pins),	\
+		.funcs = (int[]){			\
+			MSM_MUX_gpio,			\
+			MSM_MUX_##f1,			\
+			MSM_MUX_##f2,			\
+			MSM_MUX_##f3,			\
+			MSM_MUX_##f4,			\
+			MSM_MUX_##f5,			\
+			MSM_MUX_##f6,			\
+			MSM_MUX_##f7,			\
+			MSM_MUX_##f8,			\
+			MSM_MUX_##f9,			\
+			MSM_MUX_##f10,			\
+			MSM_MUX_##f11			\
+		},					\
+		.nfuncs = 12,				\
+		.ctl_reg = 0x1000 + 0x10 * id,		\
+		.io_reg = 0x1004 + 0x10 * id,		\
+		.intr_cfg_reg = 0x1008 + 0x10 * id,	\
+		.intr_status_reg = 0x100c + 0x10 * id,	\
+		.intr_target_reg = 0x1008 + 0x10 * id,	\
+		.mux_bit = 2,				\
+		.pull_bit = 0,				\
+		.drv_bit = 6,				\
+		.oe_bit = 9,				\
+		.in_bit = 0,				\
+		.out_bit = 1,				\
+		.intr_enable_bit = 0,			\
+		.intr_status_bit = 0,			\
+		.intr_target_bit = 5,			\
+		.intr_target_kpss_val = 4,		\
+		.intr_raw_status_bit = 4,		\
+		.intr_polarity_bit = 1,			\
+		.intr_detection_bit = 2,		\
+		.intr_detection_width = 2,		\
+	}
+
+#define SDC_PINGROUP(pg_name, ctl, pull, drv)		\
+	{						\
+		.name = #pg_name,			\
+		.pins = pg_name##_pins,			\
+		.npins = ARRAY_SIZE(pg_name##_pins),	\
+		.ctl_reg = ctl,				\
+		.io_reg = 0,				\
+		.intr_cfg_reg = 0,			\
+		.intr_status_reg = 0,			\
+		.intr_target_reg = 0,			\
+		.mux_bit = -1,				\
+		.pull_bit = pull,			\
+		.drv_bit = drv,				\
+		.oe_bit = -1,				\
+		.in_bit = -1,				\
+		.out_bit = -1,				\
+		.intr_enable_bit = -1,			\
+		.intr_status_bit = -1,			\
+		.intr_target_bit = -1,			\
+		.intr_target_kpss_val = -1,		\
+		.intr_raw_status_bit = -1,		\
+		.intr_polarity_bit = -1,		\
+		.intr_detection_bit = -1,		\
+		.intr_detection_width = -1,		\
+	}
+static const struct pinctrl_pin_desc msm8994_pins[] = {
+	PINCTRL_PIN(0, "GPIO_0"),
+	PINCTRL_PIN(1, "GPIO_1"),
+	PINCTRL_PIN(2, "GPIO_2"),
+	PINCTRL_PIN(3, "GPIO_3"),
+	PINCTRL_PIN(4, "GPIO_4"),
+	PINCTRL_PIN(5, "GPIO_5"),
+	PINCTRL_PIN(6, "GPIO_6"),
+	PINCTRL_PIN(7, "GPIO_7"),
+	PINCTRL_PIN(8, "GPIO_8"),
+	PINCTRL_PIN(9, "GPIO_9"),
+	PINCTRL_PIN(10, "GPIO_10"),
+	PINCTRL_PIN(11, "GPIO_11"),
+	PINCTRL_PIN(12, "GPIO_12"),
+	PINCTRL_PIN(13, "GPIO_13"),
+	PINCTRL_PIN(14, "GPIO_14"),
+	PINCTRL_PIN(15, "GPIO_15"),
+	PINCTRL_PIN(16, "GPIO_16"),
+	PINCTRL_PIN(17, "GPIO_17"),
+	PINCTRL_PIN(18, "GPIO_18"),
+	PINCTRL_PIN(19, "GPIO_19"),
+	PINCTRL_PIN(20, "GPIO_20"),
+	PINCTRL_PIN(21, "GPIO_21"),
+	PINCTRL_PIN(22, "GPIO_22"),
+	PINCTRL_PIN(23, "GPIO_23"),
+	PINCTRL_PIN(24, "GPIO_24"),
+	PINCTRL_PIN(25, "GPIO_25"),
+	PINCTRL_PIN(26, "GPIO_26"),
+	PINCTRL_PIN(27, "GPIO_27"),
+	PINCTRL_PIN(28, "GPIO_28"),
+	PINCTRL_PIN(29, "GPIO_29"),
+	PINCTRL_PIN(30, "GPIO_30"),
+	PINCTRL_PIN(31, "GPIO_31"),
+	PINCTRL_PIN(32, "GPIO_32"),
+	PINCTRL_PIN(33, "GPIO_33"),
+	PINCTRL_PIN(34, "GPIO_34"),
+	PINCTRL_PIN(35, "GPIO_35"),
+	PINCTRL_PIN(36, "GPIO_36"),
+	PINCTRL_PIN(37, "GPIO_37"),
+	PINCTRL_PIN(38, "GPIO_38"),
+	PINCTRL_PIN(39, "GPIO_39"),
+	PINCTRL_PIN(40, "GPIO_40"),
+	PINCTRL_PIN(41, "GPIO_41"),
+	PINCTRL_PIN(42, "GPIO_42"),
+	PINCTRL_PIN(43, "GPIO_43"),
+	PINCTRL_PIN(44, "GPIO_44"),
+	PINCTRL_PIN(45, "GPIO_45"),
+	PINCTRL_PIN(46, "GPIO_46"),
+	PINCTRL_PIN(47, "GPIO_47"),
+	PINCTRL_PIN(48, "GPIO_48"),
+	PINCTRL_PIN(49, "GPIO_49"),
+	PINCTRL_PIN(50, "GPIO_50"),
+	PINCTRL_PIN(51, "GPIO_51"),
+	PINCTRL_PIN(52, "GPIO_52"),
+	PINCTRL_PIN(53, "GPIO_53"),
+	PINCTRL_PIN(54, "GPIO_54"),
+	PINCTRL_PIN(55, "GPIO_55"),
+	PINCTRL_PIN(56, "GPIO_56"),
+	PINCTRL_PIN(57, "GPIO_57"),
+	PINCTRL_PIN(58, "GPIO_58"),
+	PINCTRL_PIN(59, "GPIO_59"),
+	PINCTRL_PIN(60, "GPIO_60"),
+	PINCTRL_PIN(61, "GPIO_61"),
+	PINCTRL_PIN(62, "GPIO_62"),
+	PINCTRL_PIN(63, "GPIO_63"),
+	PINCTRL_PIN(64, "GPIO_64"),
+	PINCTRL_PIN(65, "GPIO_65"),
+	PINCTRL_PIN(66, "GPIO_66"),
+	PINCTRL_PIN(67, "GPIO_67"),
+	PINCTRL_PIN(68, "GPIO_68"),
+	PINCTRL_PIN(69, "GPIO_69"),
+	PINCTRL_PIN(70, "GPIO_70"),
+	PINCTRL_PIN(71, "GPIO_71"),
+	PINCTRL_PIN(72, "GPIO_72"),
+	PINCTRL_PIN(73, "GPIO_73"),
+	PINCTRL_PIN(74, "GPIO_74"),
+	PINCTRL_PIN(75, "GPIO_75"),
+	PINCTRL_PIN(76, "GPIO_76"),
+	PINCTRL_PIN(77, "GPIO_77"),
+	PINCTRL_PIN(78, "GPIO_78"),
+	PINCTRL_PIN(79, "GPIO_79"),
+	PINCTRL_PIN(80, "GPIO_80"),
+	PINCTRL_PIN(81, "GPIO_81"),
+	PINCTRL_PIN(82, "GPIO_82"),
+	PINCTRL_PIN(83, "GPIO_83"),
+	PINCTRL_PIN(84, "GPIO_84"),
+	PINCTRL_PIN(85, "GPIO_85"),
+	PINCTRL_PIN(86, "GPIO_86"),
+	PINCTRL_PIN(87, "GPIO_87"),
+	PINCTRL_PIN(88, "GPIO_88"),
+	PINCTRL_PIN(89, "GPIO_89"),
+	PINCTRL_PIN(90, "GPIO_90"),
+	PINCTRL_PIN(91, "GPIO_91"),
+	PINCTRL_PIN(92, "GPIO_92"),
+	PINCTRL_PIN(93, "GPIO_93"),
+	PINCTRL_PIN(94, "GPIO_94"),
+	PINCTRL_PIN(95, "GPIO_95"),
+	PINCTRL_PIN(96, "GPIO_96"),
+	PINCTRL_PIN(97, "GPIO_97"),
+	PINCTRL_PIN(98, "GPIO_98"),
+	PINCTRL_PIN(99, "GPIO_99"),
+	PINCTRL_PIN(100, "GPIO_100"),
+	PINCTRL_PIN(101, "GPIO_101"),
+	PINCTRL_PIN(102, "GPIO_102"),
+	PINCTRL_PIN(103, "GPIO_103"),
+	PINCTRL_PIN(104, "GPIO_104"),
+	PINCTRL_PIN(105, "GPIO_105"),
+	PINCTRL_PIN(106, "GPIO_106"),
+	PINCTRL_PIN(107, "GPIO_107"),
+	PINCTRL_PIN(108, "GPIO_108"),
+	PINCTRL_PIN(109, "GPIO_109"),
+	PINCTRL_PIN(110, "GPIO_110"),
+	PINCTRL_PIN(111, "GPIO_111"),
+	PINCTRL_PIN(112, "GPIO_112"),
+	PINCTRL_PIN(113, "GPIO_113"),
+	PINCTRL_PIN(114, "GPIO_114"),
+	PINCTRL_PIN(115, "GPIO_115"),
+	PINCTRL_PIN(116, "GPIO_116"),
+	PINCTRL_PIN(117, "GPIO_117"),
+	PINCTRL_PIN(118, "GPIO_118"),
+	PINCTRL_PIN(119, "GPIO_119"),
+	PINCTRL_PIN(120, "GPIO_120"),
+	PINCTRL_PIN(121, "GPIO_121"),
+	PINCTRL_PIN(122, "GPIO_122"),
+	PINCTRL_PIN(123, "GPIO_123"),
+	PINCTRL_PIN(124, "GPIO_124"),
+	PINCTRL_PIN(125, "GPIO_125"),
+	PINCTRL_PIN(126, "GPIO_126"),
+	PINCTRL_PIN(127, "GPIO_127"),
+	PINCTRL_PIN(128, "GPIO_128"),
+	PINCTRL_PIN(129, "GPIO_129"),
+	PINCTRL_PIN(130, "GPIO_130"),
+	PINCTRL_PIN(131, "GPIO_131"),
+	PINCTRL_PIN(132, "GPIO_132"),
+	PINCTRL_PIN(133, "GPIO_133"),
+	PINCTRL_PIN(134, "GPIO_134"),
+	PINCTRL_PIN(135, "GPIO_135"),
+	PINCTRL_PIN(136, "GPIO_136"),
+	PINCTRL_PIN(137, "GPIO_137"),
+	PINCTRL_PIN(138, "GPIO_138"),
+	PINCTRL_PIN(139, "GPIO_139"),
+	PINCTRL_PIN(140, "GPIO_140"),
+	PINCTRL_PIN(141, "GPIO_141"),
+	PINCTRL_PIN(142, "GPIO_142"),
+	PINCTRL_PIN(143, "GPIO_143"),
+	PINCTRL_PIN(144, "GPIO_144"),
+	PINCTRL_PIN(145, "GPIO_145"),
+	PINCTRL_PIN(146, "SDC1_RCLK"),
+	PINCTRL_PIN(147, "SDC1_CLK"),
+	PINCTRL_PIN(148, "SDC1_CMD"),
+	PINCTRL_PIN(149, "SDC1_DATA"),
+	PINCTRL_PIN(150, "SDC2_CLK"),
+	PINCTRL_PIN(151, "SDC2_CMD"),
+	PINCTRL_PIN(152, "SDC2_DATA"),
+	PINCTRL_PIN(153, "SDC3_CLK"),
+	PINCTRL_PIN(154, "SDC3_CMD"),
+	PINCTRL_PIN(155, "SDC3_DATA"),
+};
+
+#define DECLARE_MSM_GPIO_PINS(pin) \
+	static const unsigned int gpio##pin##_pins[] = { pin }
+DECLARE_MSM_GPIO_PINS(0);
+DECLARE_MSM_GPIO_PINS(1);
+DECLARE_MSM_GPIO_PINS(2);
+DECLARE_MSM_GPIO_PINS(3);
+DECLARE_MSM_GPIO_PINS(4);
+DECLARE_MSM_GPIO_PINS(5);
+DECLARE_MSM_GPIO_PINS(6);
+DECLARE_MSM_GPIO_PINS(7);
+DECLARE_MSM_GPIO_PINS(8);
+DECLARE_MSM_GPIO_PINS(9);
+DECLARE_MSM_GPIO_PINS(10);
+DECLARE_MSM_GPIO_PINS(11);
+DECLARE_MSM_GPIO_PINS(12);
+DECLARE_MSM_GPIO_PINS(13);
+DECLARE_MSM_GPIO_PINS(14);
+DECLARE_MSM_GPIO_PINS(15);
+DECLARE_MSM_GPIO_PINS(16);
+DECLARE_MSM_GPIO_PINS(17);
+DECLARE_MSM_GPIO_PINS(18);
+DECLARE_MSM_GPIO_PINS(19);
+DECLARE_MSM_GPIO_PINS(20);
+DECLARE_MSM_GPIO_PINS(21);
+DECLARE_MSM_GPIO_PINS(22);
+DECLARE_MSM_GPIO_PINS(23);
+DECLARE_MSM_GPIO_PINS(24);
+DECLARE_MSM_GPIO_PINS(25);
+DECLARE_MSM_GPIO_PINS(26);
+DECLARE_MSM_GPIO_PINS(27);
+DECLARE_MSM_GPIO_PINS(28);
+DECLARE_MSM_GPIO_PINS(29);
+DECLARE_MSM_GPIO_PINS(30);
+DECLARE_MSM_GPIO_PINS(31);
+DECLARE_MSM_GPIO_PINS(32);
+DECLARE_MSM_GPIO_PINS(33);
+DECLARE_MSM_GPIO_PINS(34);
+DECLARE_MSM_GPIO_PINS(35);
+DECLARE_MSM_GPIO_PINS(36);
+DECLARE_MSM_GPIO_PINS(37);
+DECLARE_MSM_GPIO_PINS(38);
+DECLARE_MSM_GPIO_PINS(39);
+DECLARE_MSM_GPIO_PINS(40);
+DECLARE_MSM_GPIO_PINS(41);
+DECLARE_MSM_GPIO_PINS(42);
+DECLARE_MSM_GPIO_PINS(43);
+DECLARE_MSM_GPIO_PINS(44);
+DECLARE_MSM_GPIO_PINS(45);
+DECLARE_MSM_GPIO_PINS(46);
+DECLARE_MSM_GPIO_PINS(47);
+DECLARE_MSM_GPIO_PINS(48);
+DECLARE_MSM_GPIO_PINS(49);
+DECLARE_MSM_GPIO_PINS(50);
+DECLARE_MSM_GPIO_PINS(51);
+DECLARE_MSM_GPIO_PINS(52);
+DECLARE_MSM_GPIO_PINS(53);
+DECLARE_MSM_GPIO_PINS(54);
+DECLARE_MSM_GPIO_PINS(55);
+DECLARE_MSM_GPIO_PINS(56);
+DECLARE_MSM_GPIO_PINS(57);
+DECLARE_MSM_GPIO_PINS(58);
+DECLARE_MSM_GPIO_PINS(59);
+DECLARE_MSM_GPIO_PINS(60);
+DECLARE_MSM_GPIO_PINS(61);
+DECLARE_MSM_GPIO_PINS(62);
+DECLARE_MSM_GPIO_PINS(63);
+DECLARE_MSM_GPIO_PINS(64);
+DECLARE_MSM_GPIO_PINS(65);
+DECLARE_MSM_GPIO_PINS(66);
+DECLARE_MSM_GPIO_PINS(67);
+DECLARE_MSM_GPIO_PINS(68);
+DECLARE_MSM_GPIO_PINS(69);
+DECLARE_MSM_GPIO_PINS(70);
+DECLARE_MSM_GPIO_PINS(71);
+DECLARE_MSM_GPIO_PINS(72);
+DECLARE_MSM_GPIO_PINS(73);
+DECLARE_MSM_GPIO_PINS(74);
+DECLARE_MSM_GPIO_PINS(75);
+DECLARE_MSM_GPIO_PINS(76);
+DECLARE_MSM_GPIO_PINS(77);
+DECLARE_MSM_GPIO_PINS(78);
+DECLARE_MSM_GPIO_PINS(79);
+DECLARE_MSM_GPIO_PINS(80);
+DECLARE_MSM_GPIO_PINS(81);
+DECLARE_MSM_GPIO_PINS(82);
+DECLARE_MSM_GPIO_PINS(83);
+DECLARE_MSM_GPIO_PINS(84);
+DECLARE_MSM_GPIO_PINS(85);
+DECLARE_MSM_GPIO_PINS(86);
+DECLARE_MSM_GPIO_PINS(87);
+DECLARE_MSM_GPIO_PINS(88);
+DECLARE_MSM_GPIO_PINS(89);
+DECLARE_MSM_GPIO_PINS(90);
+DECLARE_MSM_GPIO_PINS(91);
+DECLARE_MSM_GPIO_PINS(92);
+DECLARE_MSM_GPIO_PINS(93);
+DECLARE_MSM_GPIO_PINS(94);
+DECLARE_MSM_GPIO_PINS(95);
+DECLARE_MSM_GPIO_PINS(96);
+DECLARE_MSM_GPIO_PINS(97);
+DECLARE_MSM_GPIO_PINS(98);
+DECLARE_MSM_GPIO_PINS(99);
+DECLARE_MSM_GPIO_PINS(100);
+DECLARE_MSM_GPIO_PINS(101);
+DECLARE_MSM_GPIO_PINS(102);
+DECLARE_MSM_GPIO_PINS(103);
+DECLARE_MSM_GPIO_PINS(104);
+DECLARE_MSM_GPIO_PINS(105);
+DECLARE_MSM_GPIO_PINS(106);
+DECLARE_MSM_GPIO_PINS(107);
+DECLARE_MSM_GPIO_PINS(108);
+DECLARE_MSM_GPIO_PINS(109);
+DECLARE_MSM_GPIO_PINS(110);
+DECLARE_MSM_GPIO_PINS(111);
+DECLARE_MSM_GPIO_PINS(112);
+DECLARE_MSM_GPIO_PINS(113);
+DECLARE_MSM_GPIO_PINS(114);
+DECLARE_MSM_GPIO_PINS(115);
+DECLARE_MSM_GPIO_PINS(116);
+DECLARE_MSM_GPIO_PINS(117);
+DECLARE_MSM_GPIO_PINS(118);
+DECLARE_MSM_GPIO_PINS(119);
+DECLARE_MSM_GPIO_PINS(120);
+DECLARE_MSM_GPIO_PINS(121);
+DECLARE_MSM_GPIO_PINS(122);
+DECLARE_MSM_GPIO_PINS(123);
+DECLARE_MSM_GPIO_PINS(124);
+DECLARE_MSM_GPIO_PINS(125);
+DECLARE_MSM_GPIO_PINS(126);
+DECLARE_MSM_GPIO_PINS(127);
+DECLARE_MSM_GPIO_PINS(128);
+DECLARE_MSM_GPIO_PINS(129);
+DECLARE_MSM_GPIO_PINS(130);
+DECLARE_MSM_GPIO_PINS(131);
+DECLARE_MSM_GPIO_PINS(132);
+DECLARE_MSM_GPIO_PINS(133);
+DECLARE_MSM_GPIO_PINS(134);
+DECLARE_MSM_GPIO_PINS(135);
+DECLARE_MSM_GPIO_PINS(136);
+DECLARE_MSM_GPIO_PINS(137);
+DECLARE_MSM_GPIO_PINS(138);
+DECLARE_MSM_GPIO_PINS(139);
+DECLARE_MSM_GPIO_PINS(140);
+DECLARE_MSM_GPIO_PINS(141);
+DECLARE_MSM_GPIO_PINS(142);
+DECLARE_MSM_GPIO_PINS(143);
+DECLARE_MSM_GPIO_PINS(144);
+DECLARE_MSM_GPIO_PINS(145);
+
+static const unsigned int sdc1_rclk_pins[] = { 146 };
+static const unsigned int sdc1_clk_pins[] = { 147 };
+static const unsigned int sdc1_cmd_pins[] = { 148 };
+static const unsigned int sdc1_data_pins[] = { 149 };
+static const unsigned int sdc2_clk_pins[] = { 150 };
+static const unsigned int sdc2_cmd_pins[] = { 151 };
+static const unsigned int sdc2_data_pins[] = { 152 };
+static const unsigned int sdc3_clk_pins[] = { 153 };
+static const unsigned int sdc3_cmd_pins[] = { 154 };
+static const unsigned int sdc3_data_pins[] = { 155 };
+
+enum msm8994_functions {
+	MSM_MUX_audio_ref_clk,
+	MSM_MUX_blsp_i2c1,
+	MSM_MUX_blsp_i2c2,
+	MSM_MUX_blsp_i2c3,
+	MSM_MUX_blsp_i2c4,
+	MSM_MUX_blsp_i2c5,
+	MSM_MUX_blsp_i2c6,
+	MSM_MUX_blsp_i2c7,
+	MSM_MUX_blsp_i2c8,
+	MSM_MUX_blsp_i2c9,
+	MSM_MUX_blsp_i2c10,
+	MSM_MUX_blsp_i2c11,
+	MSM_MUX_blsp_i2c12,
+	MSM_MUX_blsp_spi1,
+	MSM_MUX_blsp_spi1_cs1,
+	MSM_MUX_blsp_spi1_cs2,
+	MSM_MUX_blsp_spi1_cs3,
+	MSM_MUX_blsp_spi2,
+	MSM_MUX_blsp_spi2_cs1,
+	MSM_MUX_blsp_spi2_cs2,
+	MSM_MUX_blsp_spi2_cs3,
+	MSM_MUX_blsp_spi3,
+	MSM_MUX_blsp_spi4,
+	MSM_MUX_blsp_spi5,
+	MSM_MUX_blsp_spi6,
+	MSM_MUX_blsp_spi7,
+	MSM_MUX_blsp_spi8,
+	MSM_MUX_blsp_spi9,
+	MSM_MUX_blsp_spi10,
+	MSM_MUX_blsp_spi10_cs1,
+	MSM_MUX_blsp_spi10_cs2,
+	MSM_MUX_blsp_spi10_cs3,
+	MSM_MUX_blsp_spi11,
+	MSM_MUX_blsp_spi12,
+	MSM_MUX_blsp_uart1,
+	MSM_MUX_blsp_uart2,
+	MSM_MUX_blsp_uart3,
+	MSM_MUX_blsp_uart4,
+	MSM_MUX_blsp_uart5,
+	MSM_MUX_blsp_uart6,
+	MSM_MUX_blsp_uart7,
+	MSM_MUX_blsp_uart8,
+	MSM_MUX_blsp_uart9,
+	MSM_MUX_blsp_uart10,
+	MSM_MUX_blsp_uart11,
+	MSM_MUX_blsp_uart12,
+	MSM_MUX_blsp_uim1,
+	MSM_MUX_blsp_uim2,
+	MSM_MUX_blsp_uim3,
+	MSM_MUX_blsp_uim4,
+	MSM_MUX_blsp_uim5,
+	MSM_MUX_blsp_uim6,
+	MSM_MUX_blsp_uim7,
+	MSM_MUX_blsp_uim8,
+	MSM_MUX_blsp_uim9,
+	MSM_MUX_blsp_uim10,
+	MSM_MUX_blsp_uim11,
+	MSM_MUX_blsp_uim12,
+	MSM_MUX_blsp11_i2c_scl_b,
+	MSM_MUX_blsp11_i2c_sda_b,
+	MSM_MUX_blsp11_uart_rx_b,
+	MSM_MUX_blsp11_uart_tx_b,
+	MSM_MUX_cam_mclk0,
+	MSM_MUX_cam_mclk1,
+	MSM_MUX_cam_mclk2,
+	MSM_MUX_cam_mclk3,
+	MSM_MUX_cci_async_in0,
+	MSM_MUX_cci_async_in1,
+	MSM_MUX_cci_async_in2,
+	MSM_MUX_cci_i2c0,
+	MSM_MUX_cci_i2c1,
+	MSM_MUX_cci_timer0,
+	MSM_MUX_cci_timer1,
+	MSM_MUX_cci_timer2,
+	MSM_MUX_cci_timer3,
+	MSM_MUX_cci_timer4,
+	MSM_MUX_gcc_gp_clk1,
+	MSM_MUX_gcc_gp_clk2,
+	MSM_MUX_gcc_gp_clk3,
+	MSM_MUX_gp_mn,
+	MSM_MUX_gp_pdm0,
+	MSM_MUX_gp_pdm1,
+	MSM_MUX_gp_pdm2,
+	MSM_MUX_gp0_clk,
+	MSM_MUX_gp1_clk,
+	MSM_MUX_gps_tx,
+	MSM_MUX_grfc,
+	MSM_MUX_gsm_tx,
+	MSM_MUX_hdmi_cec,
+	MSM_MUX_hdmi_ddc,
+	MSM_MUX_hdmi_hpd,
+	MSM_MUX_mdp_vsync,
+	MSM_MUX_mss_lte,
+	MSM_MUX_nav_pps,
+	MSM_MUX_nav_tsync,
+	MSM_MUX_qdss_cti_trig_in_a,
+	MSM_MUX_qdss_cti_trig_in_b,
+	MSM_MUX_qdss_cti_trig_in_c,
+	MSM_MUX_qdss_cti_trig_in_d,
+	MSM_MUX_qdss_cti_trig_out_a,
+	MSM_MUX_qdss_cti_trig_out_b,
+	MSM_MUX_qdss_cti_trig_out_c,
+	MSM_MUX_qdss_cti_trig_out_d,
+	MSM_MUX_qdss_traceclk_a,
+	MSM_MUX_qdss_traceclk_b,
+	MSM_MUX_qdss_tracectl_a,
+	MSM_MUX_qdss_tracectl_b,
+	MSM_MUX_qdss_tracedata_a,
+	MSM_MUX_qdss_tracedata_b,
+	MSM_MUX_qua_mi2s,
+	MSM_MUX_pci_e0,
+	MSM_MUX_pci_e1,
+	MSM_MUX_pri_mi2s,
+	MSM_MUX_rffe1,
+	MSM_MUX_rffe2,
+	MSM_MUX_rffe3,
+	MSM_MUX_rffe4,
+	MSM_MUX_rffe5,
+	MSM_MUX_rffe6,
+	MSM_MUX_rffe7,
+	MSM_MUX_sdc4,
+	MSM_MUX_sec_mi2s,
+	MSM_MUX_slimbus,
+	MSM_MUX_spkr_mi2s,
+	MSM_MUX_ter_mi2s,
+	MSM_MUX_tsif1,
+	MSM_MUX_tsif2,
+	MSM_MUX_uim1,
+	MSM_MUX_uim2,
+	MSM_MUX_uim3,
+	MSM_MUX_uim4,
+	MSM_MUX_uim_batt_alarm,
+	MSM_MUX_gpio,
+	MSM_MUX_NA,
+};
+
+static const char * const gpio_groups[] = {
+	"gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7",
+	"gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14",
+	"gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21",
+	"gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28",
+	"gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
+	"gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
+	"gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49",
+	"gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56",
+	"gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63",
+	"gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69", "gpio70",
+	"gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76", "gpio77",
+	"gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", "gpio84",
+	"gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90", "gpio91",
+	"gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97", "gpio98",
+	"gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104",
+	"gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110",
+	"gpio111", "gpio112", "gpio113", "gpio114", "gpio115", "gpio116",
+	"gpio117", "gpio118", "gpio119", "gpio120", "gpio121", "gpio122",
+	"gpio123", "gpio124", "gpio125", "gpio126", "gpio127", "gpio128",
+	"gpio129", "gpio130", "gpio131", "gpio132", "gpio133", "gpio134",
+	"gpio135", "gpio136", "gpio137", "gpio138", "gpio139", "gpio140",
+	"gpio141", "gpio142", "gpio143", "gpio144", "gpio145",
+};
+
+static const char * const blsp_spi1_groups[] = {
+	"gpio0", "gpio1", "gpio2", "gpio3"
+};
+static const char * const blsp_uart1_groups[] = {
+	"gpio0", "gpio1", "gpio2", "gpio3"
+};
+static const char * const blsp_uim1_groups[] = {
+	"gpio0", "gpio1"
+};
+static const char * const blsp_i2c1_groups[] = {
+	"gpio2", "gpio3"
+};
+static const char * const blsp_spi2_groups[] = {
+	"gpio4", "gpio5", "gpio6", "gpio7"
+};
+static const char * const blsp_uart2_groups[] = {
+	"gpio4", "gpio5", "gpio6", "gpio7"
+};
+static const char * const blsp_uim2_groups[] = {
+	"gpio4", "gpio5"
+};
+static const char * const qdss_cti_trig_out_b_groups[] = {
+	"gpio4",
+};
+static const char * const qdss_cti_trig_in_b_groups[] = {
+	"gpio5",
+};
+static const char * const blsp_i2c2_groups[] = {
+	"gpio6", "gpio7"
+};
+static const char * const blsp_spi3_groups[] = {
+	"gpio8", "gpio9", "gpio10", "gpio11"
+};
+static const char * const blsp_uart3_groups[] = {
+	"gpio8", "gpio9", "gpio10", "gpio11"
+};
+static const char * const blsp_uim3_groups[] = {
+	"gpio8", "gpio9"
+};
+static const char * const blsp_spi1_cs1_groups[] = {
+	"gpio8"
+};
+static const char * const blsp_spi1_cs2_groups[] = {
+	"gpio9", "gpio11"
+};
+static const char * const mdp_vsync_groups[] = {
+	"gpio10", "gpio11", "gpio12"
+};
+static const char * const blsp_i2c3_groups[] = {
+	"gpio10", "gpio11"
+};
+static const char * const blsp_spi1_cs3_groups[] = {
+	"gpio10"
+};
+static const char * const qdss_tracedata_b_groups[] = {
+	"gpio13", "gpio14", "gpio15", "gpio16", "gpio17", "gpio18",
+	"gpio19", "gpio21", "gpio22", "gpio23", "gpio25", "gpio26",
+	"gpio57", "gpio58", "gpio92", "gpio93",
+};
+static const char * const cam_mclk0_groups[] = {
+	"gpio13"
+};
+static const char * const cam_mclk1_groups[] = {
+	"gpio14"
+};
+static const char * const cam_mclk2_groups[] = {
+	"gpio15"
+};
+static const char * const cam_mclk3_groups[] = {
+	"gpio16"
+};
+static const char * const cci_i2c0_groups[] = {
+	"gpio17", "gpio18"
+};
+static const char * const blsp_spi4_groups[] = {
+	"gpio17", "gpio18", "gpio19", "gpio20"
+};
+static const char * const blsp_uart4_groups[] = {
+	"gpio17", "gpio18", "gpio19", "gpio20"
+};
+static const char * const blsp_uim4_groups[] = {
+	"gpio17", "gpio18"
+};
+static const char * const cci_i2c1_groups[] = {
+	"gpio19", "gpio20"
+};
+static const char * const blsp_i2c4_groups[] = {
+	"gpio19", "gpio20"
+};
+static const char * const cci_timer0_groups[] = {
+	"gpio21"
+};
+static const char * const blsp_spi5_groups[] = {
+	"gpio21", "gpio22", "gpio23", "gpio24"
+};
+static const char * const blsp_uart5_groups[] = {
+	"gpio21", "gpio22", "gpio23", "gpio24"
+};
+static const char * const blsp_uim5_groups[] = {
+	"gpio21", "gpio22"
+};
+static const char * const cci_timer1_groups[] = {
+	"gpio22"
+};
+static const char * const cci_timer2_groups[] = {
+	"gpio23"
+};
+static const char * const blsp_i2c5_groups[] = {
+	"gpio23", "gpio24"
+};
+static const char * const cci_timer3_groups[] = {
+	"gpio24"
+};
+static const char * const cci_async_in1_groups[] = {
+	"gpio24"
+};
+static const char * const cci_timer4_groups[] = {
+	"gpio25"
+};
+static const char * const cci_async_in2_groups[] = {
+	"gpio25"
+};
+static const char * const blsp_spi6_groups[] = {
+	"gpio25", "gpio26", "gpio27", "gpio28"
+};
+static const char * const blsp_uart6_groups[] = {
+	"gpio25", "gpio26", "gpio27", "gpio28"
+};
+static const char * const blsp_uim6_groups[] = {
+	"gpio25", "gpio26"
+};
+static const char * const cci_async_in0_groups[] = {
+	"gpio26"
+};
+static const char * const gp0_clk_groups[] = {
+	"gpio26"
+};
+static const char * const gp1_clk_groups[] = {
+	"gpio27", "gpio57", "gpio78"
+};
+static const char * const blsp_i2c6_groups[] = {
+	"gpio27", "gpio28"
+};
+static const char * const qdss_tracectl_a_groups[] = {
+	"gpio27",
+};
+static const char * const qdss_traceclk_a_groups[] = {
+	"gpio28",
+};
+static const char * const gp_mn_groups[] = {
+	"gpio29"
+};
+static const char * const hdmi_cec_groups[] = {
+	"gpio31"
+};
+static const char * const hdmi_ddc_groups[] = {
+	"gpio32", "gpio33"
+};
+static const char * const hdmi_hpd_groups[] = {
+	"gpio34"
+};
+static const char * const uim3_groups[] = {
+	"gpio35", "gpio36", "gpio37", "gpio38"
+};
+static const char * const pci_e1_groups[] = {
+	"gpio35", "gpio36",
+};
+static const char * const blsp_spi7_groups[] = {
+	"gpio41", "gpio42", "gpio43", "gpio44"
+};
+static const char * const blsp_uart7_groups[] = {
+	"gpio41", "gpio42", "gpio43", "gpio44"
+};
+static const char * const blsp_uim7_groups[] = {
+	"gpio41", "gpio42"
+};
+static const char * const qdss_cti_trig_out_c_groups[] = {
+	"gpio41",
+};
+static const char * const qdss_cti_trig_in_c_groups[] = {
+	"gpio42",
+};
+static const char * const blsp_i2c7_groups[] = {
+	"gpio43", "gpio44"
+};
+static const char * const blsp_spi8_groups[] = {
+	"gpio45", "gpio46", "gpio47", "gpio48"
+};
+static const char * const blsp_uart8_groups[] = {
+	"gpio45", "gpio46", "gpio47", "gpio48"
+};
+static const char * const blsp_uim8_groups[] = {
+	"gpio45", "gpio46"
+};
+static const char * const blsp_i2c8_groups[] = {
+	"gpio47", "gpio48"
+};
+static const char * const blsp_spi10_cs1_groups[] = {
+	"gpio47", "gpio67"
+};
+static const char * const blsp_spi10_cs2_groups[] = {
+	"gpio48", "gpio68"
+};
+static const char * const uim2_groups[] = {
+	"gpio49", "gpio50", "gpio51", "gpio52"
+};
+static const char * const blsp_spi9_groups[] = {
+	"gpio49", "gpio50", "gpio51", "gpio52"
+};
+static const char * const blsp_uart9_groups[] = {
+	"gpio49", "gpio50", "gpio51", "gpio52"
+};
+static const char * const blsp_uim9_groups[] = {
+	"gpio49", "gpio50"
+};
+static const char * const blsp_i2c9_groups[] = {
+	"gpio51", "gpio52"
+};
+static const char * const pci_e0_groups[] = {
+	"gpio53", "gpio54",
+};
+static const char * const uim4_groups[] = {
+	"gpio53", "gpio54", "gpio55", "gpio56"
+};
+static const char * const blsp_spi10_groups[] = {
+	"gpio53", "gpio54", "gpio55", "gpio56"
+};
+static const char * const blsp_uart10_groups[] = {
+	"gpio53", "gpio54", "gpio55", "gpio56"
+};
+static const char * const blsp_uim10_groups[] = {
+	"gpio53", "gpio54"
+};
+static const char * const qdss_tracedata_a_groups[] = {
+	"gpio53", "gpio54", "gpio63", "gpio64", "gpio65",
+	"gpio66", "gpio67", "gpio74", "gpio75", "gpio76",
+	"gpio77", "gpio85", "gpio86", "gpio87", "gpio89",
+	"gpio90"
+};
+static const char * const gp_pdm0_groups[] = {
+	"gpio54", "gpio95"
+};
+static const char * const blsp_i2c10_groups[] = {
+	"gpio55", "gpio56"
+};
+static const char * const qdss_cti_trig_in_a_groups[] = {
+	"gpio55",
+};
+static const char * const qdss_cti_trig_out_a_groups[] = {
+	"gpio56",
+};
+static const char * const qua_mi2s_groups[] = {
+	"gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63",
+};
+static const char * const gcc_gp_clk1_groups[] = {
+	"gpio57", "gpio78"
+};
+static const char * const gcc_gp_clk2_groups[] = {
+	"gpio58", "gpio81"
+};
+static const char * const gcc_gp_clk3_groups[] = {
+	"gpio59", "gpio82"
+};
+static const char * const blsp_spi2_cs1_groups[] = {
+	"gpio62"
+};
+static const char * const blsp_spi2_cs2_groups[] = {
+	"gpio63"
+};
+static const char * const gp_pdm2_groups[] = {
+	"gpio63", "gpio79"
+};
+static const char * const pri_mi2s_groups[] = {
+	"gpio64", "gpio65", "gpio66", "gpio67", "gpio68"
+};
+static const char * const blsp_spi2_cs3_groups[] = {
+	"gpio66"
+};
+static const char * const spkr_mi2s_groups[] = {
+	"gpio69", "gpio70", "gpio71", "gpio72"
+};
+static const char * const audio_ref_clk_groups[] = {
+	"gpio69"
+};
+static const char * const slimbus_groups[] = {
+	"gpio70", "gpio71"
+};
+static const char * const ter_mi2s_groups[] = {
+	"gpio73", "gpio74", "gpio75", "gpio76", "gpio77"
+};
+static const char * const gp_pdm1_groups[] = {
+	"gpio74", "gpio86"
+};
+static const char * const sec_mi2s_groups[] = {
+	"gpio78", "gpio79", "gpio80", "gpio81", "gpio82"
+};
+static const char * const blsp_spi11_groups[] = {
+	"gpio81", "gpio82", "gpio83", "gpio84"
+};
+static const char * const blsp_uart11_groups[] = {
+	"gpio81", "gpio82", "gpio83", "gpio84"
+};
+static const char * const blsp_uim11_groups[] = {
+	"gpio81", "gpio82"
+};
+static const char * const blsp_i2c11_groups[] = {
+	"gpio83", "gpio84"
+};
+static const char * const blsp_uart12_groups[] = {
+	"gpio85", "gpio86", "gpio87", "gpio88"
+};
+static const char * const blsp_uim12_groups[] = {
+	"gpio85", "gpio86"
+};
+static const char * const blsp_i2c12_groups[] = {
+	"gpio87", "gpio88"
+};
+static const char * const blsp_spi12_groups[] = {
+	"gpio85", "gpio86", "gpio87", "gpio88"
+};
+static const char * const tsif1_groups[] = {
+	"gpio89", "gpio90", "gpio91", "gpio110", "gpio111"
+};
+static const char * const blsp_spi10_cs3_groups[] = {
+	"gpio90"
+};
+static const char * const sdc4_groups[] = {
+	"gpio91", "gpio92", "gpio93", "gpio94", "gpio95", "gpio96"
+};
+static const char * const qdss_traceclk_b_groups[] = {
+	"gpio91",
+};
+static const char * const tsif2_groups[] = {
+	"gpio92", "gpio93", "gpio94", "gpio95", "gpio96"
+};
+static const char * const qdss_tracectl_b_groups[] = {
+	"gpio94",
+};
+static const char * const qdss_cti_trig_out_d_groups[] = {
+	"gpio95",
+};
+static const char * const qdss_cti_trig_in_d_groups[] = {
+	"gpio96",
+};
+static const char * const uim1_groups[] = {
+	"gpio97", "gpio98", "gpio99", "gpio100"
+};
+static const char * const uim_batt_alarm_groups[] = {
+	"gpio101"
+};
+static const char * const blsp11_uart_tx_b_groups[] = {
+	"gpio111"
+};
+static const char * const blsp11_uart_rx_b_groups[] = {
+	"gpio112"
+};
+static const char * const blsp11_i2c_sda_b_groups[] = {
+	"gpio113"
+};
+static const char * const blsp11_i2c_scl_b_groups[] = {
+	"gpio114"
+};
+static const char * const grfc_groups[] = {
+	"gpio115", "gpio116", "gpio117", "gpio118", "gpio119", "gpio120",
+	"gpio121", "gpio122", "gpio123", "gpio124", "gpio125", "gpio126",
+	"gpio127", "gpio128", "gpio129", "gpio133"
+};
+static const char * const rffe6_groups[] = {
+	"gpio115", "gpio116"
+};
+static const char * const rffe7_groups[] = {
+	"gpio117", "gpio118"
+};
+static const char * const gsm_tx_groups[] = {
+	"gpio126", "gpio131", "gpio132", "gpio133"
+};
+static const char * const nav_tsync_groups[] = {
+	"gpio127"
+};
+static const char * const nav_pps_groups[] = {
+	"gpio127"
+};
+static const char * const gps_tx_groups[] = {
+	"gpio130"
+};
+static const char * const mss_lte_groups[] = {
+	"gpio134", "gpio135"
+};
+static const char * const rffe1_groups[] = {
+	"gpio136", "gpio137"
+};
+static const char * const rffe2_groups[] = {
+	"gpio138", "gpio139"
+};
+static const char * const rffe3_groups[] = {
+	"gpio140", "gpio141"
+};
+static const char * const rffe4_groups[] = {
+	"gpio142", "gpio143"
+};
+static const char * const rffe5_groups[] = {
+	"gpio144", "gpio145"
+};
+
+static const struct msm_function msm8994_functions[] = {
+	FUNCTION(audio_ref_clk),
+	FUNCTION(blsp_i2c1),
+	FUNCTION(blsp_i2c2),
+	FUNCTION(blsp_i2c3),
+	FUNCTION(blsp_i2c4),
+	FUNCTION(blsp_i2c5),
+	FUNCTION(blsp_i2c6),
+	FUNCTION(blsp_i2c7),
+	FUNCTION(blsp_i2c8),
+	FUNCTION(blsp_i2c9),
+	FUNCTION(blsp_i2c10),
+	FUNCTION(blsp_i2c11),
+	FUNCTION(blsp_i2c12),
+	FUNCTION(blsp_spi1),
+	FUNCTION(blsp_spi1_cs1),
+	FUNCTION(blsp_spi1_cs2),
+	FUNCTION(blsp_spi1_cs3),
+	FUNCTION(blsp_spi2),
+	FUNCTION(blsp_spi2_cs1),
+	FUNCTION(blsp_spi2_cs2),
+	FUNCTION(blsp_spi2_cs3),
+	FUNCTION(blsp_spi3),
+	FUNCTION(blsp_spi4),
+	FUNCTION(blsp_spi5),
+	FUNCTION(blsp_spi6),
+	FUNCTION(blsp_spi7),
+	FUNCTION(blsp_spi8),
+	FUNCTION(blsp_spi9),
+	FUNCTION(blsp_spi10),
+	FUNCTION(blsp_spi10_cs1),
+	FUNCTION(blsp_spi10_cs2),
+	FUNCTION(blsp_spi10_cs3),
+	FUNCTION(blsp_spi11),
+	FUNCTION(blsp_spi12),
+	FUNCTION(blsp_uart1),
+	FUNCTION(blsp_uart2),
+	FUNCTION(blsp_uart3),
+	FUNCTION(blsp_uart4),
+	FUNCTION(blsp_uart5),
+	FUNCTION(blsp_uart6),
+	FUNCTION(blsp_uart7),
+	FUNCTION(blsp_uart8),
+	FUNCTION(blsp_uart9),
+	FUNCTION(blsp_uart10),
+	FUNCTION(blsp_uart11),
+	FUNCTION(blsp_uart12),
+	FUNCTION(blsp_uim1),
+	FUNCTION(blsp_uim2),
+	FUNCTION(blsp_uim3),
+	FUNCTION(blsp_uim4),
+	FUNCTION(blsp_uim5),
+	FUNCTION(blsp_uim6),
+	FUNCTION(blsp_uim7),
+	FUNCTION(blsp_uim8),
+	FUNCTION(blsp_uim9),
+	FUNCTION(blsp_uim10),
+	FUNCTION(blsp_uim11),
+	FUNCTION(blsp_uim12),
+	FUNCTION(blsp11_i2c_scl_b),
+	FUNCTION(blsp11_i2c_sda_b),
+	FUNCTION(blsp11_uart_rx_b),
+	FUNCTION(blsp11_uart_tx_b),
+	FUNCTION(cam_mclk0),
+	FUNCTION(cam_mclk1),
+	FUNCTION(cam_mclk2),
+	FUNCTION(cam_mclk3),
+	FUNCTION(cci_async_in0),
+	FUNCTION(cci_async_in1),
+	FUNCTION(cci_async_in2),
+	FUNCTION(cci_i2c0),
+	FUNCTION(cci_i2c1),
+	FUNCTION(cci_timer0),
+	FUNCTION(cci_timer1),
+	FUNCTION(cci_timer2),
+	FUNCTION(cci_timer3),
+	FUNCTION(cci_timer4),
+	FUNCTION(gcc_gp_clk1),
+	FUNCTION(gcc_gp_clk2),
+	FUNCTION(gcc_gp_clk3),
+	FUNCTION(gp_mn),
+	FUNCTION(gp_pdm0),
+	FUNCTION(gp_pdm1),
+	FUNCTION(gp_pdm2),
+	FUNCTION(gp0_clk),
+	FUNCTION(gp1_clk),
+	FUNCTION(gps_tx),
+	FUNCTION(grfc),
+	FUNCTION(gsm_tx),
+	FUNCTION(hdmi_cec),
+	FUNCTION(hdmi_ddc),
+	FUNCTION(hdmi_hpd),
+	FUNCTION(mdp_vsync),
+	FUNCTION(mss_lte),
+	FUNCTION(nav_pps),
+	FUNCTION(nav_tsync),
+	FUNCTION(qdss_cti_trig_in_a),
+	FUNCTION(qdss_cti_trig_in_b),
+	FUNCTION(qdss_cti_trig_in_c),
+	FUNCTION(qdss_cti_trig_in_d),
+	FUNCTION(qdss_cti_trig_out_a),
+	FUNCTION(qdss_cti_trig_out_b),
+	FUNCTION(qdss_cti_trig_out_c),
+	FUNCTION(qdss_cti_trig_out_d),
+	FUNCTION(qdss_traceclk_a),
+	FUNCTION(qdss_traceclk_b),
+	FUNCTION(qdss_tracectl_a),
+	FUNCTION(qdss_tracectl_b),
+	FUNCTION(qdss_tracedata_a),
+	FUNCTION(qdss_tracedata_b),
+	FUNCTION(qua_mi2s),
+	FUNCTION(pci_e0),
+	FUNCTION(pci_e1),
+	FUNCTION(pri_mi2s),
+	FUNCTION(rffe1),
+	FUNCTION(rffe2),
+	FUNCTION(rffe3),
+	FUNCTION(rffe4),
+	FUNCTION(rffe5),
+	FUNCTION(rffe6),
+	FUNCTION(rffe7),
+	FUNCTION(sdc4),
+	FUNCTION(sec_mi2s),
+	FUNCTION(slimbus),
+	FUNCTION(spkr_mi2s),
+	FUNCTION(ter_mi2s),
+	FUNCTION(tsif1),
+	FUNCTION(tsif2),
+	FUNCTION(uim_batt_alarm),
+	FUNCTION(uim1),
+	FUNCTION(uim2),
+	FUNCTION(uim3),
+	FUNCTION(uim4),
+	FUNCTION(gpio),
+};
+
+static const struct msm_pingroup msm8994_groups[] = {
+	PINGROUP(0,   blsp_spi1, blsp_uart1, blsp_uim1, NA, NA, NA, NA, NA, NA,
+		 NA, NA),
+	PINGROUP(1,   blsp_spi1, blsp_uart1, blsp_uim1, NA, NA, NA, NA, NA, NA,
+		 NA, NA),
+	PINGROUP(2,   blsp_spi1, blsp_uart1, blsp_i2c1, NA, NA, NA, NA, NA, NA,
+		 NA, NA),
+	PINGROUP(3,   blsp_spi1, blsp_uart1, blsp_i2c1, NA, NA, NA, NA, NA, NA,
+		 NA, NA),
+	PINGROUP(4,   blsp_spi2, blsp_uart2, blsp_uim2, qdss_cti_trig_out_b,
+		 NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(5,   blsp_spi2, blsp_uart2, blsp_uim2, qdss_cti_trig_in_b, NA,
+		 NA, NA, NA, NA, NA, NA),
+	PINGROUP(6,   blsp_spi2, blsp_uart2, blsp_i2c2, NA, NA, NA, NA, NA, NA,
+		 NA, NA),
+	PINGROUP(7,   blsp_spi2, blsp_uart2, blsp_i2c2, NA, NA, NA, NA, NA, NA,
+		 NA, NA),
+	PINGROUP(8,   blsp_spi3, blsp_uart3, blsp_uim3, blsp_spi1_cs1, NA, NA,
+		 NA, NA, NA, NA, NA),
+	PINGROUP(9,   blsp_spi3, blsp_uart3, blsp_uim3, blsp_spi1_cs2, NA, NA,
+		 NA, NA, NA, NA, NA),
+	PINGROUP(10,  mdp_vsync, blsp_spi3, blsp_uart3, blsp_i2c3,
+		 blsp_spi1_cs3, NA, NA, NA, NA, NA, NA),
+	PINGROUP(11,  mdp_vsync, blsp_spi3, blsp_uart3, blsp_i2c3,
+		 blsp_spi1_cs2, NA, NA, NA, NA, NA, NA),
+	PINGROUP(12,  mdp_vsync, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(13,  cam_mclk0, NA, NA, qdss_tracedata_b, NA, NA, NA, NA, NA,
+		 NA, NA),
+	PINGROUP(14,  cam_mclk1, NA, NA, qdss_tracedata_b, NA, NA, NA, NA, NA,
+		 NA, NA),
+	PINGROUP(15,  cam_mclk2, NA, qdss_tracedata_b, NA, NA, NA, NA, NA, NA,
+		 NA, NA),
+	PINGROUP(16,  cam_mclk3, NA, qdss_tracedata_b, NA, NA, NA, NA, NA, NA,
+		 NA, NA),
+	PINGROUP(17,  cci_i2c0, blsp_spi4, blsp_uart4, blsp_uim4, NA,
+		 qdss_tracedata_b, NA, NA, NA, NA, NA),
+	PINGROUP(18,  cci_i2c0, blsp_spi4, blsp_uart4, blsp_uim4, NA,
+		 qdss_tracedata_b, NA, NA, NA, NA, NA),
+	PINGROUP(19,  cci_i2c1, blsp_spi4, blsp_uart4, blsp_i2c4, NA,
+		 qdss_tracedata_b, NA, NA, NA, NA, NA),
+	PINGROUP(20,  cci_i2c1, blsp_spi4, blsp_uart4, blsp_i2c4, NA, NA, NA,
+		 NA, NA, NA, NA),
+	PINGROUP(21,  cci_timer0, blsp_spi5, blsp_uart5, blsp_uim5, NA,
+		 qdss_tracedata_b, NA, NA, NA, NA, NA),
+	PINGROUP(22,  cci_timer1, blsp_spi5, blsp_uart5, blsp_uim5, NA,
+		 qdss_tracedata_b, NA, NA, NA, NA, NA),
+	PINGROUP(23,  cci_timer2, blsp_spi5, blsp_uart5, blsp_i2c5, NA, NA,
+		 qdss_tracedata_b, NA, NA, NA, NA),
+	PINGROUP(24,  cci_timer3, cci_async_in1, blsp_spi5, blsp_uart5,
+		 blsp_i2c5, NA, NA, NA, NA, NA, NA),
+	PINGROUP(25,  cci_timer4, cci_async_in2, blsp_spi6, blsp_uart6,
+		 blsp_uim6, NA, NA, qdss_tracedata_b, NA, NA, NA),
+	PINGROUP(26,  cci_async_in0, blsp_spi6, blsp_uart6, blsp_uim6, gp0_clk,
+		 NA, qdss_tracedata_b, NA, NA, NA, NA),
+	PINGROUP(27,  blsp_spi6, blsp_uart6, blsp_i2c6, gp1_clk,
+		 qdss_tracectl_a, NA, NA, NA, NA, NA, NA),
+	PINGROUP(28,  blsp_spi6, blsp_uart6, blsp_i2c6, qdss_traceclk_a, NA,
+		 NA, NA, NA, NA, NA, NA),
+	PINGROUP(29,  gp_mn, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(30,  NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(31,  hdmi_cec, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(32,  hdmi_ddc, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(33,  hdmi_ddc, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(34,  hdmi_hpd, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(35,  uim3, pci_e1, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(36,  uim3, pci_e1, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(37,  uim3, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(38,  uim3, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(39,  NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(40,  NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(41,  blsp_spi7, blsp_uart7, blsp_uim7, qdss_cti_trig_out_c,
+		 NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(42,  blsp_spi7, blsp_uart7, blsp_uim7, qdss_cti_trig_in_c, NA,
+		 NA, NA, NA, NA, NA, NA),
+	PINGROUP(43,  blsp_spi7, blsp_uart7, blsp_i2c7, NA, NA, NA, NA, NA, NA,
+		 NA, NA),
+	PINGROUP(44,  blsp_spi7, blsp_uart7, blsp_i2c7, NA, NA, NA, NA, NA, NA,
+		 NA, NA),
+	PINGROUP(45,  blsp_spi8, blsp_uart8, blsp_uim8, NA, NA, NA, NA, NA, NA,
+		 NA, NA),
+	PINGROUP(46,  blsp_spi8, blsp_uart8, blsp_uim8, NA, NA, NA, NA, NA, NA,
+		 NA, NA),
+	PINGROUP(47,  blsp_spi8, blsp_uart8, blsp_i2c8, blsp_spi10_cs1, NA, NA,
+		 NA, NA, NA, NA, NA),
+	PINGROUP(48,  blsp_spi8, blsp_uart8, blsp_i2c8, blsp_spi10_cs2, NA, NA,
+		 NA, NA, NA, NA, NA),
+	PINGROUP(49,  uim2, blsp_spi9, blsp_uart9, blsp_uim9, NA, NA, NA, NA,
+		 NA, NA, NA),
+	PINGROUP(50,  uim2, blsp_spi9, blsp_uart9, blsp_uim9, NA, NA, NA, NA,
+		 NA, NA, NA),
+	PINGROUP(51,  uim2, blsp_spi9, blsp_uart9, blsp_i2c9, NA, NA, NA, NA,
+		 NA, NA, NA),
+	PINGROUP(52,  uim2, blsp_spi9, blsp_uart9, blsp_i2c9, NA, NA, NA, NA,
+		 NA, NA, NA),
+	PINGROUP(53,  uim4, pci_e0, blsp_spi10, blsp_uart10, blsp_uim10, NA,
+		 NA, NA, NA, qdss_tracedata_a, NA),
+	PINGROUP(54,  uim4, pci_e0, blsp_spi10, blsp_uart10, blsp_uim10,
+		 gp_pdm0, NA, NA, NA, NA, qdss_tracedata_a),
+	PINGROUP(55,  uim4, blsp_spi10, blsp_uart10, blsp_i2c10, NA, NA, NA,
+		 NA, NA, qdss_cti_trig_in_a, NA),
+	PINGROUP(56,  uim4, blsp_spi10, blsp_uart10, blsp_i2c10, NA, NA, NA,
+		 NA, qdss_cti_trig_out_a, NA, NA),
+	PINGROUP(57,  qua_mi2s, gcc_gp_clk1, NA, NA, NA, NA, qdss_tracedata_b,
+		 NA, NA, NA, NA),
+	PINGROUP(58,  qua_mi2s, gcc_gp_clk2, NA, NA, NA, NA, qdss_tracedata_b,
+		 NA, NA, NA, NA),
+	PINGROUP(59,  qua_mi2s, gcc_gp_clk3, NA, NA, NA, NA, NA, NA, NA, NA,
+		 NA),
+	PINGROUP(60,  qua_mi2s, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(61,  qua_mi2s, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(62,  qua_mi2s, blsp_spi2_cs1, NA, NA, NA, NA, NA, NA, NA, NA,
+		 NA),
+	PINGROUP(63,  qua_mi2s, blsp_spi2_cs2, gp_pdm2, NA, NA, NA, NA, NA,
+		 qdss_tracedata_a, NA, NA),
+	PINGROUP(64,  pri_mi2s, NA, NA, NA, NA, NA, qdss_tracedata_a, NA, NA,
+		 NA, NA),
+	PINGROUP(65,  pri_mi2s, NA, NA, NA, NA, NA, qdss_tracedata_a, NA, NA,
+		 NA, NA),
+	PINGROUP(66,  pri_mi2s, blsp_spi2_cs3, NA, NA, NA, NA, NA,
+		 qdss_tracedata_a, NA, NA, NA),
+	PINGROUP(67,  pri_mi2s, blsp_spi10_cs1, NA, NA, NA, NA, NA,
+		 qdss_tracedata_a, NA, NA, NA),
+	PINGROUP(68,  pri_mi2s, blsp_spi10_cs2, NA, NA, NA, NA, NA, NA, NA, NA,
+		 NA),
+	PINGROUP(69,  spkr_mi2s, audio_ref_clk, NA, NA, NA, NA, NA, NA, NA, NA,
+		 NA),
+	PINGROUP(70,  slimbus, spkr_mi2s, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(71,  slimbus, spkr_mi2s, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(72,  spkr_mi2s, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(73,  ter_mi2s, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(74,  ter_mi2s, gp_pdm1, NA, NA, NA, NA, NA, qdss_tracedata_a,
+		 NA, NA, NA),
+	PINGROUP(75,  ter_mi2s, NA, NA, NA, NA, qdss_tracedata_a, NA, NA, NA,
+		 NA, NA),
+	PINGROUP(76,  ter_mi2s, NA, NA, NA, NA, qdss_tracedata_a, NA, NA, NA,
+		 NA, NA),
+	PINGROUP(77,  ter_mi2s, NA, NA, NA, NA, qdss_tracedata_a, NA, NA, NA,
+		 NA, NA),
+	PINGROUP(78,  sec_mi2s, gcc_gp_clk1, NA, NA, NA, NA, NA, NA, NA, NA,
+		 NA),
+	PINGROUP(79,  sec_mi2s, gp_pdm2, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(80,  sec_mi2s, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(81,  sec_mi2s, blsp_spi11, blsp_uart11, blsp_uim11,
+		 gcc_gp_clk2, NA, NA, NA, NA, NA, NA),
+	PINGROUP(82,  sec_mi2s, blsp_spi11, blsp_uart11, blsp_uim11,
+		 gcc_gp_clk3, NA, NA, NA, NA, NA, NA),
+	PINGROUP(83,  blsp_spi11, blsp_uart11, blsp_i2c11, NA, NA, NA, NA, NA,
+		 NA, NA, NA),
+	PINGROUP(84,  blsp_spi11, blsp_uart11, blsp_i2c11, NA, NA, NA, NA, NA,
+		 NA, NA, NA),
+	PINGROUP(85,  blsp_spi12, blsp_uart12, blsp_uim12, NA, NA,
+		 qdss_tracedata_a, NA, NA, NA, NA, NA),
+	PINGROUP(86,  blsp_spi12, blsp_uart12, blsp_uim12, gp_pdm1, NA,
+		 qdss_tracedata_a, NA, NA, NA, NA, NA),
+	PINGROUP(87,  blsp_spi12, blsp_uart12, blsp_i2c12, NA,
+		 qdss_tracedata_a, NA, NA, NA, NA, NA, NA),
+	PINGROUP(88,  blsp_spi12, blsp_uart12, blsp_i2c12, NA, NA, NA, NA, NA,
+		 NA, NA, NA),
+	PINGROUP(89,  tsif1, NA, qdss_tracedata_a, NA, NA, NA, NA, NA, NA, NA,
+		 NA),
+	PINGROUP(90,  tsif1, blsp_spi10_cs3, qdss_tracedata_a, NA, NA, NA, NA,
+		 NA, NA, NA, NA),
+	PINGROUP(91,  tsif1, sdc4, NA, NA, NA, NA, qdss_traceclk_b, NA, NA, NA,
+		 NA),
+	PINGROUP(92,  tsif2, sdc4, NA, NA, qdss_tracedata_b, NA, NA, NA, NA,
+		 NA, NA),
+	PINGROUP(93,  tsif2, sdc4, NA, NA, NA, NA, qdss_tracedata_b, NA, NA,
+		 NA, NA),
+	PINGROUP(94,  tsif2, sdc4, NA, NA, NA, NA, qdss_tracectl_b, NA, NA, NA,
+		 NA),
+	PINGROUP(95,  tsif2, sdc4, gp_pdm0, NA, NA, NA, qdss_cti_trig_out_d,
+		 NA, NA, NA, NA),
+	PINGROUP(96,  tsif2, sdc4, qdss_cti_trig_in_d, NA, NA, NA, NA, NA, NA,
+		 NA, NA),
+	PINGROUP(97,  uim1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(98,  uim1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(99,  uim1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(100, uim1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(101, uim_batt_alarm, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(102, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(103, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(104, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(105, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(106, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(107, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(108, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(109, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(110, tsif1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(111, tsif1, blsp11_uart_tx_b, NA, NA, NA, NA, NA, NA, NA, NA,
+		 NA),
+	PINGROUP(112, blsp11_uart_rx_b, NA, NA, NA, NA, NA, NA, NA, NA, NA,
+		 NA),
+	PINGROUP(113, blsp11_i2c_sda_b, NA, NA, NA, NA, NA, NA, NA, NA, NA,
+		 NA),
+	PINGROUP(114, blsp11_i2c_scl_b, NA, NA, NA, NA, NA, NA, NA, NA, NA,
+		 NA),
+	PINGROUP(115, grfc, rffe6, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(116, grfc, rffe6, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(117, grfc, rffe7, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(118, grfc, rffe7, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(119, grfc, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(120, grfc, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(121, grfc, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(122, grfc, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(123, grfc, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(124, grfc, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(125, grfc, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(126, grfc, gsm_tx, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(127, grfc, nav_tsync, nav_pps, NA, NA, NA, NA, NA, NA, NA,
+		 NA),
+	PINGROUP(128, NA, grfc, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(129, grfc, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(130, gps_tx, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(131, gsm_tx, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(132, gsm_tx, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(133, gsm_tx, grfc, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(134, mss_lte, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(135, mss_lte, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(136, rffe1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(137, rffe1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(138, rffe2, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(139, rffe2, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(140, rffe3, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(141, rffe3, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(142, rffe4, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(143, rffe4, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(144, rffe5, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(145, rffe5, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	SDC_PINGROUP(sdc1_rclk, 0x2044, 15, 0),
+	SDC_PINGROUP(sdc1_clk, 0x2044, 13, 6),
+	SDC_PINGROUP(sdc1_cmd, 0x2044, 11, 3),
+	SDC_PINGROUP(sdc1_data, 0x2044, 9, 0),
+	SDC_PINGROUP(sdc2_clk, 0x2048, 14, 6),
+	SDC_PINGROUP(sdc2_cmd, 0x2048, 11, 3),
+	SDC_PINGROUP(sdc2_data, 0x2048, 9, 0),
+	SDC_PINGROUP(sdc3_clk, 0x206c, 14, 6),
+	SDC_PINGROUP(sdc3_cmd, 0x206c, 11, 3),
+	SDC_PINGROUP(sdc3_data, 0x206c, 9, 0),
+};
+
+#define NUM_GPIO_PINGROUPS 146
+
+static const struct msm_pinctrl_soc_data msm8994_pinctrl = {
+	.pins = msm8994_pins,
+	.npins = ARRAY_SIZE(msm8994_pins),
+	.functions = msm8994_functions,
+	.nfunctions = ARRAY_SIZE(msm8994_functions),
+	.groups = msm8994_groups,
+	.ngroups = ARRAY_SIZE(msm8994_groups),
+	.ngpios = NUM_GPIO_PINGROUPS,
+};
+
+static int msm8994_pinctrl_probe(struct platform_device *pdev)
+{
+	return msm_pinctrl_probe(pdev, &msm8994_pinctrl);
+}
+
+static const struct of_device_id msm8994_pinctrl_of_match[] = {
+	{ .compatible = "qcom,msm8994-pinctrl", },
+	{ },
+};
+
+static struct platform_driver msm8994_pinctrl_driver = {
+	.driver = {
+		.name = "msm8994-pinctrl",
+		.of_match_table = msm8994_pinctrl_of_match,
+	},
+	.probe = msm8994_pinctrl_probe,
+	.remove = msm_pinctrl_remove,
+};
+
+static int __init msm8994_pinctrl_init(void)
+{
+	return platform_driver_register(&msm8994_pinctrl_driver);
+}
+arch_initcall(msm8994_pinctrl_init);
+
+static void __exit msm8994_pinctrl_exit(void)
+{
+	platform_driver_unregister(&msm8994_pinctrl_driver);
+}
+module_exit(msm8994_pinctrl_exit);
+
+MODULE_DESCRIPTION("Qualcomm MSM8994 pinctrl driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, msm8994_pinctrl_of_match);
-- 
2.9.3

^ permalink raw reply related	[flat|nested] 8+ messages in thread

* Re: [PATCH V2] pinctrl: qcom: Add msm8994 pinctrl driver
  2016-10-26 23:32 [PATCH V2] pinctrl: qcom: Add msm8994 pinctrl driver Michael Scott
@ 2016-10-27  1:09 ` Jeremy McNicoll
  2016-10-29  8:27 ` Linus Walleij
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 8+ messages in thread
From: Jeremy McNicoll @ 2016-10-27  1:09 UTC (permalink / raw)
  To: Michael Scott, linux-gpio, linux-arm-msm, devicetree, linux-kernel
  Cc: Linus Walleij, Rob Herring, Mark Rutland, Andy Gross,
	David Brown, Bjorn Andersson, Joonwoo Park, Jeremy McNicoll

On 2016-10-26 4:32 PM, Michael Scott wrote:
> Initial pinctrl driver for QCOM msm8994 platforms.
>
> In order to continue the initial board support for QCOM msm8994/msm8992
> presented in patches from Jeremy McNicoll <jeremymc@redhat.com>, let's put
> a proper pinctrl driver in place.
>
> Currently, the DT for these platforms uses the msm8x74 pinctrl driver to enable
> basic UART.  Beyond the first few pins the rest are different enough to justify
> it's own driver.
>
> Note: This driver is also be used by QCOM's msm8992 platform as it's TLM block
> is the same.
>
> - Initial formatting and style was taken from the msm8x74 pinctrl driver added
>   by Björn Andersson <bjorn.andersson@linaro.org>
> - Data was then adjusted per QCOM MSM8994 documentation for Top Level Multiplexing
> - Bindings documentation was based on qcom,msm8996-pinctrl.txt by
>   Joonwoo Park <joonwoop@codeaurora.org> and then modified for msm8994 content
>
> Signed-off-by: Michael Scott <michael.scott@linaro.org>
> ---
>
> V1 -> V2: fixed missing FUNCTION(nav_pps) and removed 3 odd newlines between blsp_i2c4_groups and cci_timer0_groups
>

This version still boots fine on the msm8992 with my latest changes.


Tested-by: Jeremy McNicoll <jeremymc@redhat.com>

-jeremy

>  .../bindings/pinctrl/qcom,msm8994-pinctrl.txt      |  175 +++
>  drivers/pinctrl/qcom/Kconfig                       |    9 +
>  drivers/pinctrl/qcom/Makefile                      |    1 +
>  drivers/pinctrl/qcom/pinctrl-msm8994.c             | 1400 ++++++++++++++++++++
>  4 files changed, 1585 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt
>  create mode 100644 drivers/pinctrl/qcom/pinctrl-msm8994.c
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt
> new file mode 100644
> index 0000000..e390087b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt
> @@ -0,0 +1,175 @@
> +Qualcomm MSM8994 TLMM block
> +
> +This binding describes the Top Level Mode Multiplexer block found in the
> +MSM8994 platform.
> +
> +- compatible:
> +	Usage: required
> +	Value type: <string>
> +	Definition: must be "qcom,msm8994-pinctrl"
> +
> +- reg:
> +	Usage: required
> +	Value type: <prop-encoded-array>
> +	Definition: the base address and size of the TLMM register space.
> +
> +- interrupts:
> +	Usage: required
> +	Value type: <prop-encoded-array>
> +	Definition: should specify the TLMM summary IRQ.
> +
> +- interrupt-controller:
> +	Usage: required
> +	Value type: <none>
> +	Definition: identifies this node as an interrupt controller
> +
> +- #interrupt-cells:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: must be 2. Specifying the pin number and flags, as defined
> +		    in <dt-bindings/interrupt-controller/irq.h>
> +
> +- gpio-controller:
> +	Usage: required
> +	Value type: <none>
> +	Definition: identifies this node as a gpio controller
> +
> +- #gpio-cells:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: must be 2. Specifying the pin number and flags, as defined
> +		    in <dt-bindings/gpio/gpio.h>
> +
> +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
> +a general description of GPIO and interrupt bindings.
> +
> +Please refer to pinctrl-bindings.txt in this directory for details of the
> +common pinctrl bindings used by client devices, including the meaning of the
> +phrase "pin configuration node".
> +
> +The pin configuration nodes act as a container for an arbitrary number of
> +subnodes. Each of these subnodes represents some desired configuration for a
> +pin, a group, or a list of pins or groups. This configuration can include the
> +mux function to select on those pin(s)/group(s), and various pin configuration
> +parameters, such as pull-up, drive strength, etc.
> +
> +
> +PIN CONFIGURATION NODES:
> +
> +The name of each subnode is not important; all subnodes should be enumerated
> +and processed purely based on their content.
> +
> +Each subnode only affects those parameters that are explicitly listed. In
> +other words, a subnode that lists a mux function but no pin configuration
> +parameters implies no information about any pin configuration parameters.
> +Similarly, a pin subnode that describes a pullup parameter implies no
> +information about e.g. the mux function.
> +
> +
> +The following generic properties as defined in pinctrl-bindings.txt are valid
> +to specify in a pin configuration subnode:
> +
> +- pins:
> +	Usage: required
> +	Value type: <string-array>
> +	Definition: List of gpio pins affected by the properties specified in
> +		    this subnode.
> +
> +		    Valid pins are:
> +		      gpio0-gpio145
> +		        Supports mux, bias and drive-strength
> +
> +		      sdc1_clk, sdc1_cmd, sdc1_data sdc1_rclk, sdc2_clk,
> +		      sdc2_cmd, sdc2_data
> +		        Supports bias and drive-strength
> +
> +- function:
> +	Usage: required
> +	Value type: <string>
> +	Definition: Specify the alternative function to be configured for the
> +		    specified pins. Functions are only valid for gpio pins.
> +		    Valid values are:
> +
> +		    audio_ref_clk,  blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5,
> +		    blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_i2c9, blsp_i2c10, blsp_i2c11,
> +		    blsp_i2c12, blsp_spi1, blsp_spi1_cs1, blsp_spi1_cs2, blsp_spi1_cs3,
> +		    blsp_spi2, blsp_spi2_cs1, blsp_spi2_cs2, blsp_spi2_cs3, blsp_spi3,
> +		    blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, blsp_spi8, blsp_spi9,
> +		    blsp_spi10, blsp_spi10_cs1, blsp_spi10_cs2, blsp_spi10_cs3, blsp_spi11,
> +		    blsp_spi12, blsp_uart1, blsp_uart2, blsp_uart3, blsp_uart4, blsp_uart5,
> +		    blsp_uart6, blsp_uart7, blsp_uart8, blsp_uart9, blsp_uart10, blsp_uart11,
> +		    blsp_uart12, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5,
> +		    blsp_uim6, blsp_uim7, blsp_uim8, blsp_uim9, blsp_uim10, blsp_uim11,
> +		    blsp_uim12, blsp11_i2c_scl_b, blsp11_i2c_sda_b, blsp11_uart_rx_b,
> +		    blsp11_uart_tx_b, cam_mclk0, cam_mclk1, cam_mclk2, cam_mclk3,
> +		    cci_async_in0, cci_async_in1, cci_async_in2, cci_i2c0, cci_i2c1,
> +		    cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, gcc_gp_clk1,
> +		    gcc_gp_clk2, gcc_gp_clk3, gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk,
> +		    gp1_clk, gps_tx, grfc, gsm_tx, hdmi_cec, hdmi_ddc, hdmi_hpd, mdp_vsync,
> +		    mss_lte, nav_pps, nav_tsync, qdss_cti_trig_in_a, qdss_cti_trig_in_b,
> +		    qdss_cti_trig_in_c, qdss_cti_trig_in_d, qdss_cti_trig_out_a,
> +		    qdss_cti_trig_out_b, qdss_cti_trig_out_c, qdss_cti_trig_out_d,
> +		    qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
> +		    qdss_tracedata_a, qdss_tracedata_b, qua_mi2s, pci_e0, pci_e1, pri_mi2s,
> +		    rffe1, rffe2, rffe3, rffe4, rffe5, rffe6, rffe7, sdc4, sec_mi2s, slimbus,
> +		    spkr_mi2s, ter_mi2s, tsif1, tsif2, uim_batt_alarm, uim1, uim2, uim3, uim4,
> +		    gpio
> +
> +- bias-disable:
> +	Usage: optional
> +	Value type: <none>
> +	Definition: The specified pins should be configued as no pull.
> +
> +- bias-pull-down:
> +	Usage: optional
> +	Value type: <none>
> +	Definition: The specified pins should be configued as pull down.
> +
> +- bias-pull-up:
> +	Usage: optional
> +	Value type: <none>
> +	Definition: The specified pins should be configued as pull up.
> +
> +- output-high:
> +	Usage: optional
> +	Value type: <none>
> +	Definition: The specified pins are configured in output mode, driven
> +		    high.
> +		    Not valid for sdc pins.
> +
> +- output-low:
> +	Usage: optional
> +	Value type: <none>
> +	Definition: The specified pins are configured in output mode, driven
> +		    low.
> +		    Not valid for sdc pins.
> +
> +- drive-strength:
> +	Usage: optional
> +	Value type: <u32>
> +	Definition: Selects the drive strength for the specified pins, in mA.
> +		    Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
> +
> +Example:
> +
> +	msmgpio: pinctrl@fd510000 {
> +		compatible = "qcom,msm8994-pinctrl";
> +		reg = <0xfd510000 0x4000>;
> +		interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +
> +		blsp1_uart2_default: blsp1_uart2_default {
> +			pinmux {
> +				pins = "gpio4", "gpio5";
> +				function = "blsp_uart2";
> +			};
> +			pinconf {
> +				pins = "gpio4", "gpio5";
> +				drive-strength = <16>;
> +				bias-disable;
> +			};
> +		};
> +	};
> diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
> index 93ef268..3ebdc01 100644
> --- a/drivers/pinctrl/qcom/Kconfig
> +++ b/drivers/pinctrl/qcom/Kconfig
> @@ -79,6 +79,15 @@ config PINCTRL_MSM8916
>  	  This is the pinctrl, pinmux, pinconf and gpiolib driver for the
>  	  Qualcomm TLMM block found on the Qualcomm 8916 platform.
>
> +config PINCTRL_MSM8994
> +	tristate "Qualcomm 8994 pin controller driver"
> +	depends on GPIOLIB && OF
> +	select PINCTRL_MSM
> +	help
> +	  This is the pinctrl, pinmux, pinconf and gpiolib driver for the
> +	  Qualcomm TLMM block found in the Qualcomm 8994 platform. The
> +	  Qualcomm 8992 platform is also supported by this driver.
> +
>  config PINCTRL_MSM8996
>  	tristate "Qualcomm MSM8996 pin controller driver"
>  	depends on GPIOLIB && OF
> diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
> index 8319e11..ab47764 100644
> --- a/drivers/pinctrl/qcom/Makefile
> +++ b/drivers/pinctrl/qcom/Makefile
> @@ -8,6 +8,7 @@ obj-$(CONFIG_PINCTRL_MSM8660)	+= pinctrl-msm8660.o
>  obj-$(CONFIG_PINCTRL_MSM8960)	+= pinctrl-msm8960.o
>  obj-$(CONFIG_PINCTRL_MSM8X74)	+= pinctrl-msm8x74.o
>  obj-$(CONFIG_PINCTRL_MSM8916)	+= pinctrl-msm8916.o
> +obj-$(CONFIG_PINCTRL_MSM8994)   += pinctrl-msm8994.o
>  obj-$(CONFIG_PINCTRL_MSM8996)   += pinctrl-msm8996.o
>  obj-$(CONFIG_PINCTRL_QDF2XXX)	+= pinctrl-qdf2xxx.o
>  obj-$(CONFIG_PINCTRL_MDM9615)	+= pinctrl-mdm9615.o
> diff --git a/drivers/pinctrl/qcom/pinctrl-msm8994.c b/drivers/pinctrl/qcom/pinctrl-msm8994.c
> new file mode 100644
> index 0000000..556eec8
> --- /dev/null
> +++ b/drivers/pinctrl/qcom/pinctrl-msm8994.c
> @@ -0,0 +1,1400 @@
> +/*
> + * Copyright (c) 2016, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pinctrl/pinctrl.h>
> +
> +#include "pinctrl-msm.h"
> +
> +#define FUNCTION(fname)					\
> +	[MSM_MUX_##fname] = {				\
> +		.name = #fname,				\
> +		.groups = fname##_groups,		\
> +		.ngroups = ARRAY_SIZE(fname##_groups),	\
> +	}
> +
> +#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7, f8, f9, f10, f11)	\
> +	{						\
> +		.name = "gpio" #id,			\
> +		.pins = gpio##id##_pins,		\
> +		.npins = ARRAY_SIZE(gpio##id##_pins),	\
> +		.funcs = (int[]){			\
> +			MSM_MUX_gpio,			\
> +			MSM_MUX_##f1,			\
> +			MSM_MUX_##f2,			\
> +			MSM_MUX_##f3,			\
> +			MSM_MUX_##f4,			\
> +			MSM_MUX_##f5,			\
> +			MSM_MUX_##f6,			\
> +			MSM_MUX_##f7,			\
> +			MSM_MUX_##f8,			\
> +			MSM_MUX_##f9,			\
> +			MSM_MUX_##f10,			\
> +			MSM_MUX_##f11			\
> +		},					\
> +		.nfuncs = 12,				\
> +		.ctl_reg = 0x1000 + 0x10 * id,		\
> +		.io_reg = 0x1004 + 0x10 * id,		\
> +		.intr_cfg_reg = 0x1008 + 0x10 * id,	\
> +		.intr_status_reg = 0x100c + 0x10 * id,	\
> +		.intr_target_reg = 0x1008 + 0x10 * id,	\
> +		.mux_bit = 2,				\
> +		.pull_bit = 0,				\
> +		.drv_bit = 6,				\
> +		.oe_bit = 9,				\
> +		.in_bit = 0,				\
> +		.out_bit = 1,				\
> +		.intr_enable_bit = 0,			\
> +		.intr_status_bit = 0,			\
> +		.intr_target_bit = 5,			\
> +		.intr_target_kpss_val = 4,		\
> +		.intr_raw_status_bit = 4,		\
> +		.intr_polarity_bit = 1,			\
> +		.intr_detection_bit = 2,		\
> +		.intr_detection_width = 2,		\
> +	}
> +
> +#define SDC_PINGROUP(pg_name, ctl, pull, drv)		\
> +	{						\
> +		.name = #pg_name,			\
> +		.pins = pg_name##_pins,			\
> +		.npins = ARRAY_SIZE(pg_name##_pins),	\
> +		.ctl_reg = ctl,				\
> +		.io_reg = 0,				\
> +		.intr_cfg_reg = 0,			\
> +		.intr_status_reg = 0,			\
> +		.intr_target_reg = 0,			\
> +		.mux_bit = -1,				\
> +		.pull_bit = pull,			\
> +		.drv_bit = drv,				\
> +		.oe_bit = -1,				\
> +		.in_bit = -1,				\
> +		.out_bit = -1,				\
> +		.intr_enable_bit = -1,			\
> +		.intr_status_bit = -1,			\
> +		.intr_target_bit = -1,			\
> +		.intr_target_kpss_val = -1,		\
> +		.intr_raw_status_bit = -1,		\
> +		.intr_polarity_bit = -1,		\
> +		.intr_detection_bit = -1,		\
> +		.intr_detection_width = -1,		\
> +	}
> +static const struct pinctrl_pin_desc msm8994_pins[] = {
> +	PINCTRL_PIN(0, "GPIO_0"),
> +	PINCTRL_PIN(1, "GPIO_1"),
> +	PINCTRL_PIN(2, "GPIO_2"),
> +	PINCTRL_PIN(3, "GPIO_3"),
> +	PINCTRL_PIN(4, "GPIO_4"),
> +	PINCTRL_PIN(5, "GPIO_5"),
> +	PINCTRL_PIN(6, "GPIO_6"),
> +	PINCTRL_PIN(7, "GPIO_7"),
> +	PINCTRL_PIN(8, "GPIO_8"),
> +	PINCTRL_PIN(9, "GPIO_9"),
> +	PINCTRL_PIN(10, "GPIO_10"),
> +	PINCTRL_PIN(11, "GPIO_11"),
> +	PINCTRL_PIN(12, "GPIO_12"),
> +	PINCTRL_PIN(13, "GPIO_13"),
> +	PINCTRL_PIN(14, "GPIO_14"),
> +	PINCTRL_PIN(15, "GPIO_15"),
> +	PINCTRL_PIN(16, "GPIO_16"),
> +	PINCTRL_PIN(17, "GPIO_17"),
> +	PINCTRL_PIN(18, "GPIO_18"),
> +	PINCTRL_PIN(19, "GPIO_19"),
> +	PINCTRL_PIN(20, "GPIO_20"),
> +	PINCTRL_PIN(21, "GPIO_21"),
> +	PINCTRL_PIN(22, "GPIO_22"),
> +	PINCTRL_PIN(23, "GPIO_23"),
> +	PINCTRL_PIN(24, "GPIO_24"),
> +	PINCTRL_PIN(25, "GPIO_25"),
> +	PINCTRL_PIN(26, "GPIO_26"),
> +	PINCTRL_PIN(27, "GPIO_27"),
> +	PINCTRL_PIN(28, "GPIO_28"),
> +	PINCTRL_PIN(29, "GPIO_29"),
> +	PINCTRL_PIN(30, "GPIO_30"),
> +	PINCTRL_PIN(31, "GPIO_31"),
> +	PINCTRL_PIN(32, "GPIO_32"),
> +	PINCTRL_PIN(33, "GPIO_33"),
> +	PINCTRL_PIN(34, "GPIO_34"),
> +	PINCTRL_PIN(35, "GPIO_35"),
> +	PINCTRL_PIN(36, "GPIO_36"),
> +	PINCTRL_PIN(37, "GPIO_37"),
> +	PINCTRL_PIN(38, "GPIO_38"),
> +	PINCTRL_PIN(39, "GPIO_39"),
> +	PINCTRL_PIN(40, "GPIO_40"),
> +	PINCTRL_PIN(41, "GPIO_41"),
> +	PINCTRL_PIN(42, "GPIO_42"),
> +	PINCTRL_PIN(43, "GPIO_43"),
> +	PINCTRL_PIN(44, "GPIO_44"),
> +	PINCTRL_PIN(45, "GPIO_45"),
> +	PINCTRL_PIN(46, "GPIO_46"),
> +	PINCTRL_PIN(47, "GPIO_47"),
> +	PINCTRL_PIN(48, "GPIO_48"),
> +	PINCTRL_PIN(49, "GPIO_49"),
> +	PINCTRL_PIN(50, "GPIO_50"),
> +	PINCTRL_PIN(51, "GPIO_51"),
> +	PINCTRL_PIN(52, "GPIO_52"),
> +	PINCTRL_PIN(53, "GPIO_53"),
> +	PINCTRL_PIN(54, "GPIO_54"),
> +	PINCTRL_PIN(55, "GPIO_55"),
> +	PINCTRL_PIN(56, "GPIO_56"),
> +	PINCTRL_PIN(57, "GPIO_57"),
> +	PINCTRL_PIN(58, "GPIO_58"),
> +	PINCTRL_PIN(59, "GPIO_59"),
> +	PINCTRL_PIN(60, "GPIO_60"),
> +	PINCTRL_PIN(61, "GPIO_61"),
> +	PINCTRL_PIN(62, "GPIO_62"),
> +	PINCTRL_PIN(63, "GPIO_63"),
> +	PINCTRL_PIN(64, "GPIO_64"),
> +	PINCTRL_PIN(65, "GPIO_65"),
> +	PINCTRL_PIN(66, "GPIO_66"),
> +	PINCTRL_PIN(67, "GPIO_67"),
> +	PINCTRL_PIN(68, "GPIO_68"),
> +	PINCTRL_PIN(69, "GPIO_69"),
> +	PINCTRL_PIN(70, "GPIO_70"),
> +	PINCTRL_PIN(71, "GPIO_71"),
> +	PINCTRL_PIN(72, "GPIO_72"),
> +	PINCTRL_PIN(73, "GPIO_73"),
> +	PINCTRL_PIN(74, "GPIO_74"),
> +	PINCTRL_PIN(75, "GPIO_75"),
> +	PINCTRL_PIN(76, "GPIO_76"),
> +	PINCTRL_PIN(77, "GPIO_77"),
> +	PINCTRL_PIN(78, "GPIO_78"),
> +	PINCTRL_PIN(79, "GPIO_79"),
> +	PINCTRL_PIN(80, "GPIO_80"),
> +	PINCTRL_PIN(81, "GPIO_81"),
> +	PINCTRL_PIN(82, "GPIO_82"),
> +	PINCTRL_PIN(83, "GPIO_83"),
> +	PINCTRL_PIN(84, "GPIO_84"),
> +	PINCTRL_PIN(85, "GPIO_85"),
> +	PINCTRL_PIN(86, "GPIO_86"),
> +	PINCTRL_PIN(87, "GPIO_87"),
> +	PINCTRL_PIN(88, "GPIO_88"),
> +	PINCTRL_PIN(89, "GPIO_89"),
> +	PINCTRL_PIN(90, "GPIO_90"),
> +	PINCTRL_PIN(91, "GPIO_91"),
> +	PINCTRL_PIN(92, "GPIO_92"),
> +	PINCTRL_PIN(93, "GPIO_93"),
> +	PINCTRL_PIN(94, "GPIO_94"),
> +	PINCTRL_PIN(95, "GPIO_95"),
> +	PINCTRL_PIN(96, "GPIO_96"),
> +	PINCTRL_PIN(97, "GPIO_97"),
> +	PINCTRL_PIN(98, "GPIO_98"),
> +	PINCTRL_PIN(99, "GPIO_99"),
> +	PINCTRL_PIN(100, "GPIO_100"),
> +	PINCTRL_PIN(101, "GPIO_101"),
> +	PINCTRL_PIN(102, "GPIO_102"),
> +	PINCTRL_PIN(103, "GPIO_103"),
> +	PINCTRL_PIN(104, "GPIO_104"),
> +	PINCTRL_PIN(105, "GPIO_105"),
> +	PINCTRL_PIN(106, "GPIO_106"),
> +	PINCTRL_PIN(107, "GPIO_107"),
> +	PINCTRL_PIN(108, "GPIO_108"),
> +	PINCTRL_PIN(109, "GPIO_109"),
> +	PINCTRL_PIN(110, "GPIO_110"),
> +	PINCTRL_PIN(111, "GPIO_111"),
> +	PINCTRL_PIN(112, "GPIO_112"),
> +	PINCTRL_PIN(113, "GPIO_113"),
> +	PINCTRL_PIN(114, "GPIO_114"),
> +	PINCTRL_PIN(115, "GPIO_115"),
> +	PINCTRL_PIN(116, "GPIO_116"),
> +	PINCTRL_PIN(117, "GPIO_117"),
> +	PINCTRL_PIN(118, "GPIO_118"),
> +	PINCTRL_PIN(119, "GPIO_119"),
> +	PINCTRL_PIN(120, "GPIO_120"),
> +	PINCTRL_PIN(121, "GPIO_121"),
> +	PINCTRL_PIN(122, "GPIO_122"),
> +	PINCTRL_PIN(123, "GPIO_123"),
> +	PINCTRL_PIN(124, "GPIO_124"),
> +	PINCTRL_PIN(125, "GPIO_125"),
> +	PINCTRL_PIN(126, "GPIO_126"),
> +	PINCTRL_PIN(127, "GPIO_127"),
> +	PINCTRL_PIN(128, "GPIO_128"),
> +	PINCTRL_PIN(129, "GPIO_129"),
> +	PINCTRL_PIN(130, "GPIO_130"),
> +	PINCTRL_PIN(131, "GPIO_131"),
> +	PINCTRL_PIN(132, "GPIO_132"),
> +	PINCTRL_PIN(133, "GPIO_133"),
> +	PINCTRL_PIN(134, "GPIO_134"),
> +	PINCTRL_PIN(135, "GPIO_135"),
> +	PINCTRL_PIN(136, "GPIO_136"),
> +	PINCTRL_PIN(137, "GPIO_137"),
> +	PINCTRL_PIN(138, "GPIO_138"),
> +	PINCTRL_PIN(139, "GPIO_139"),
> +	PINCTRL_PIN(140, "GPIO_140"),
> +	PINCTRL_PIN(141, "GPIO_141"),
> +	PINCTRL_PIN(142, "GPIO_142"),
> +	PINCTRL_PIN(143, "GPIO_143"),
> +	PINCTRL_PIN(144, "GPIO_144"),
> +	PINCTRL_PIN(145, "GPIO_145"),
> +	PINCTRL_PIN(146, "SDC1_RCLK"),
> +	PINCTRL_PIN(147, "SDC1_CLK"),
> +	PINCTRL_PIN(148, "SDC1_CMD"),
> +	PINCTRL_PIN(149, "SDC1_DATA"),
> +	PINCTRL_PIN(150, "SDC2_CLK"),
> +	PINCTRL_PIN(151, "SDC2_CMD"),
> +	PINCTRL_PIN(152, "SDC2_DATA"),
> +	PINCTRL_PIN(153, "SDC3_CLK"),
> +	PINCTRL_PIN(154, "SDC3_CMD"),
> +	PINCTRL_PIN(155, "SDC3_DATA"),
> +};
> +
> +#define DECLARE_MSM_GPIO_PINS(pin) \
> +	static const unsigned int gpio##pin##_pins[] = { pin }
> +DECLARE_MSM_GPIO_PINS(0);
> +DECLARE_MSM_GPIO_PINS(1);
> +DECLARE_MSM_GPIO_PINS(2);
> +DECLARE_MSM_GPIO_PINS(3);
> +DECLARE_MSM_GPIO_PINS(4);
> +DECLARE_MSM_GPIO_PINS(5);
> +DECLARE_MSM_GPIO_PINS(6);
> +DECLARE_MSM_GPIO_PINS(7);
> +DECLARE_MSM_GPIO_PINS(8);
> +DECLARE_MSM_GPIO_PINS(9);
> +DECLARE_MSM_GPIO_PINS(10);
> +DECLARE_MSM_GPIO_PINS(11);
> +DECLARE_MSM_GPIO_PINS(12);
> +DECLARE_MSM_GPIO_PINS(13);
> +DECLARE_MSM_GPIO_PINS(14);
> +DECLARE_MSM_GPIO_PINS(15);
> +DECLARE_MSM_GPIO_PINS(16);
> +DECLARE_MSM_GPIO_PINS(17);
> +DECLARE_MSM_GPIO_PINS(18);
> +DECLARE_MSM_GPIO_PINS(19);
> +DECLARE_MSM_GPIO_PINS(20);
> +DECLARE_MSM_GPIO_PINS(21);
> +DECLARE_MSM_GPIO_PINS(22);
> +DECLARE_MSM_GPIO_PINS(23);
> +DECLARE_MSM_GPIO_PINS(24);
> +DECLARE_MSM_GPIO_PINS(25);
> +DECLARE_MSM_GPIO_PINS(26);
> +DECLARE_MSM_GPIO_PINS(27);
> +DECLARE_MSM_GPIO_PINS(28);
> +DECLARE_MSM_GPIO_PINS(29);
> +DECLARE_MSM_GPIO_PINS(30);
> +DECLARE_MSM_GPIO_PINS(31);
> +DECLARE_MSM_GPIO_PINS(32);
> +DECLARE_MSM_GPIO_PINS(33);
> +DECLARE_MSM_GPIO_PINS(34);
> +DECLARE_MSM_GPIO_PINS(35);
> +DECLARE_MSM_GPIO_PINS(36);
> +DECLARE_MSM_GPIO_PINS(37);
> +DECLARE_MSM_GPIO_PINS(38);
> +DECLARE_MSM_GPIO_PINS(39);
> +DECLARE_MSM_GPIO_PINS(40);
> +DECLARE_MSM_GPIO_PINS(41);
> +DECLARE_MSM_GPIO_PINS(42);
> +DECLARE_MSM_GPIO_PINS(43);
> +DECLARE_MSM_GPIO_PINS(44);
> +DECLARE_MSM_GPIO_PINS(45);
> +DECLARE_MSM_GPIO_PINS(46);
> +DECLARE_MSM_GPIO_PINS(47);
> +DECLARE_MSM_GPIO_PINS(48);
> +DECLARE_MSM_GPIO_PINS(49);
> +DECLARE_MSM_GPIO_PINS(50);
> +DECLARE_MSM_GPIO_PINS(51);
> +DECLARE_MSM_GPIO_PINS(52);
> +DECLARE_MSM_GPIO_PINS(53);
> +DECLARE_MSM_GPIO_PINS(54);
> +DECLARE_MSM_GPIO_PINS(55);
> +DECLARE_MSM_GPIO_PINS(56);
> +DECLARE_MSM_GPIO_PINS(57);
> +DECLARE_MSM_GPIO_PINS(58);
> +DECLARE_MSM_GPIO_PINS(59);
> +DECLARE_MSM_GPIO_PINS(60);
> +DECLARE_MSM_GPIO_PINS(61);
> +DECLARE_MSM_GPIO_PINS(62);
> +DECLARE_MSM_GPIO_PINS(63);
> +DECLARE_MSM_GPIO_PINS(64);
> +DECLARE_MSM_GPIO_PINS(65);
> +DECLARE_MSM_GPIO_PINS(66);
> +DECLARE_MSM_GPIO_PINS(67);
> +DECLARE_MSM_GPIO_PINS(68);
> +DECLARE_MSM_GPIO_PINS(69);
> +DECLARE_MSM_GPIO_PINS(70);
> +DECLARE_MSM_GPIO_PINS(71);
> +DECLARE_MSM_GPIO_PINS(72);
> +DECLARE_MSM_GPIO_PINS(73);
> +DECLARE_MSM_GPIO_PINS(74);
> +DECLARE_MSM_GPIO_PINS(75);
> +DECLARE_MSM_GPIO_PINS(76);
> +DECLARE_MSM_GPIO_PINS(77);
> +DECLARE_MSM_GPIO_PINS(78);
> +DECLARE_MSM_GPIO_PINS(79);
> +DECLARE_MSM_GPIO_PINS(80);
> +DECLARE_MSM_GPIO_PINS(81);
> +DECLARE_MSM_GPIO_PINS(82);
> +DECLARE_MSM_GPIO_PINS(83);
> +DECLARE_MSM_GPIO_PINS(84);
> +DECLARE_MSM_GPIO_PINS(85);
> +DECLARE_MSM_GPIO_PINS(86);
> +DECLARE_MSM_GPIO_PINS(87);
> +DECLARE_MSM_GPIO_PINS(88);
> +DECLARE_MSM_GPIO_PINS(89);
> +DECLARE_MSM_GPIO_PINS(90);
> +DECLARE_MSM_GPIO_PINS(91);
> +DECLARE_MSM_GPIO_PINS(92);
> +DECLARE_MSM_GPIO_PINS(93);
> +DECLARE_MSM_GPIO_PINS(94);
> +DECLARE_MSM_GPIO_PINS(95);
> +DECLARE_MSM_GPIO_PINS(96);
> +DECLARE_MSM_GPIO_PINS(97);
> +DECLARE_MSM_GPIO_PINS(98);
> +DECLARE_MSM_GPIO_PINS(99);
> +DECLARE_MSM_GPIO_PINS(100);
> +DECLARE_MSM_GPIO_PINS(101);
> +DECLARE_MSM_GPIO_PINS(102);
> +DECLARE_MSM_GPIO_PINS(103);
> +DECLARE_MSM_GPIO_PINS(104);
> +DECLARE_MSM_GPIO_PINS(105);
> +DECLARE_MSM_GPIO_PINS(106);
> +DECLARE_MSM_GPIO_PINS(107);
> +DECLARE_MSM_GPIO_PINS(108);
> +DECLARE_MSM_GPIO_PINS(109);
> +DECLARE_MSM_GPIO_PINS(110);
> +DECLARE_MSM_GPIO_PINS(111);
> +DECLARE_MSM_GPIO_PINS(112);
> +DECLARE_MSM_GPIO_PINS(113);
> +DECLARE_MSM_GPIO_PINS(114);
> +DECLARE_MSM_GPIO_PINS(115);
> +DECLARE_MSM_GPIO_PINS(116);
> +DECLARE_MSM_GPIO_PINS(117);
> +DECLARE_MSM_GPIO_PINS(118);
> +DECLARE_MSM_GPIO_PINS(119);
> +DECLARE_MSM_GPIO_PINS(120);
> +DECLARE_MSM_GPIO_PINS(121);
> +DECLARE_MSM_GPIO_PINS(122);
> +DECLARE_MSM_GPIO_PINS(123);
> +DECLARE_MSM_GPIO_PINS(124);
> +DECLARE_MSM_GPIO_PINS(125);
> +DECLARE_MSM_GPIO_PINS(126);
> +DECLARE_MSM_GPIO_PINS(127);
> +DECLARE_MSM_GPIO_PINS(128);
> +DECLARE_MSM_GPIO_PINS(129);
> +DECLARE_MSM_GPIO_PINS(130);
> +DECLARE_MSM_GPIO_PINS(131);
> +DECLARE_MSM_GPIO_PINS(132);
> +DECLARE_MSM_GPIO_PINS(133);
> +DECLARE_MSM_GPIO_PINS(134);
> +DECLARE_MSM_GPIO_PINS(135);
> +DECLARE_MSM_GPIO_PINS(136);
> +DECLARE_MSM_GPIO_PINS(137);
> +DECLARE_MSM_GPIO_PINS(138);
> +DECLARE_MSM_GPIO_PINS(139);
> +DECLARE_MSM_GPIO_PINS(140);
> +DECLARE_MSM_GPIO_PINS(141);
> +DECLARE_MSM_GPIO_PINS(142);
> +DECLARE_MSM_GPIO_PINS(143);
> +DECLARE_MSM_GPIO_PINS(144);
> +DECLARE_MSM_GPIO_PINS(145);
> +
> +static const unsigned int sdc1_rclk_pins[] = { 146 };
> +static const unsigned int sdc1_clk_pins[] = { 147 };
> +static const unsigned int sdc1_cmd_pins[] = { 148 };
> +static const unsigned int sdc1_data_pins[] = { 149 };
> +static const unsigned int sdc2_clk_pins[] = { 150 };
> +static const unsigned int sdc2_cmd_pins[] = { 151 };
> +static const unsigned int sdc2_data_pins[] = { 152 };
> +static const unsigned int sdc3_clk_pins[] = { 153 };
> +static const unsigned int sdc3_cmd_pins[] = { 154 };
> +static const unsigned int sdc3_data_pins[] = { 155 };
> +
> +enum msm8994_functions {
> +	MSM_MUX_audio_ref_clk,
> +	MSM_MUX_blsp_i2c1,
> +	MSM_MUX_blsp_i2c2,
> +	MSM_MUX_blsp_i2c3,
> +	MSM_MUX_blsp_i2c4,
> +	MSM_MUX_blsp_i2c5,
> +	MSM_MUX_blsp_i2c6,
> +	MSM_MUX_blsp_i2c7,
> +	MSM_MUX_blsp_i2c8,
> +	MSM_MUX_blsp_i2c9,
> +	MSM_MUX_blsp_i2c10,
> +	MSM_MUX_blsp_i2c11,
> +	MSM_MUX_blsp_i2c12,
> +	MSM_MUX_blsp_spi1,
> +	MSM_MUX_blsp_spi1_cs1,
> +	MSM_MUX_blsp_spi1_cs2,
> +	MSM_MUX_blsp_spi1_cs3,
> +	MSM_MUX_blsp_spi2,
> +	MSM_MUX_blsp_spi2_cs1,
> +	MSM_MUX_blsp_spi2_cs2,
> +	MSM_MUX_blsp_spi2_cs3,
> +	MSM_MUX_blsp_spi3,
> +	MSM_MUX_blsp_spi4,
> +	MSM_MUX_blsp_spi5,
> +	MSM_MUX_blsp_spi6,
> +	MSM_MUX_blsp_spi7,
> +	MSM_MUX_blsp_spi8,
> +	MSM_MUX_blsp_spi9,
> +	MSM_MUX_blsp_spi10,
> +	MSM_MUX_blsp_spi10_cs1,
> +	MSM_MUX_blsp_spi10_cs2,
> +	MSM_MUX_blsp_spi10_cs3,
> +	MSM_MUX_blsp_spi11,
> +	MSM_MUX_blsp_spi12,
> +	MSM_MUX_blsp_uart1,
> +	MSM_MUX_blsp_uart2,
> +	MSM_MUX_blsp_uart3,
> +	MSM_MUX_blsp_uart4,
> +	MSM_MUX_blsp_uart5,
> +	MSM_MUX_blsp_uart6,
> +	MSM_MUX_blsp_uart7,
> +	MSM_MUX_blsp_uart8,
> +	MSM_MUX_blsp_uart9,
> +	MSM_MUX_blsp_uart10,
> +	MSM_MUX_blsp_uart11,
> +	MSM_MUX_blsp_uart12,
> +	MSM_MUX_blsp_uim1,
> +	MSM_MUX_blsp_uim2,
> +	MSM_MUX_blsp_uim3,
> +	MSM_MUX_blsp_uim4,
> +	MSM_MUX_blsp_uim5,
> +	MSM_MUX_blsp_uim6,
> +	MSM_MUX_blsp_uim7,
> +	MSM_MUX_blsp_uim8,
> +	MSM_MUX_blsp_uim9,
> +	MSM_MUX_blsp_uim10,
> +	MSM_MUX_blsp_uim11,
> +	MSM_MUX_blsp_uim12,
> +	MSM_MUX_blsp11_i2c_scl_b,
> +	MSM_MUX_blsp11_i2c_sda_b,
> +	MSM_MUX_blsp11_uart_rx_b,
> +	MSM_MUX_blsp11_uart_tx_b,
> +	MSM_MUX_cam_mclk0,
> +	MSM_MUX_cam_mclk1,
> +	MSM_MUX_cam_mclk2,
> +	MSM_MUX_cam_mclk3,
> +	MSM_MUX_cci_async_in0,
> +	MSM_MUX_cci_async_in1,
> +	MSM_MUX_cci_async_in2,
> +	MSM_MUX_cci_i2c0,
> +	MSM_MUX_cci_i2c1,
> +	MSM_MUX_cci_timer0,
> +	MSM_MUX_cci_timer1,
> +	MSM_MUX_cci_timer2,
> +	MSM_MUX_cci_timer3,
> +	MSM_MUX_cci_timer4,
> +	MSM_MUX_gcc_gp_clk1,
> +	MSM_MUX_gcc_gp_clk2,
> +	MSM_MUX_gcc_gp_clk3,
> +	MSM_MUX_gp_mn,
> +	MSM_MUX_gp_pdm0,
> +	MSM_MUX_gp_pdm1,
> +	MSM_MUX_gp_pdm2,
> +	MSM_MUX_gp0_clk,
> +	MSM_MUX_gp1_clk,
> +	MSM_MUX_gps_tx,
> +	MSM_MUX_grfc,
> +	MSM_MUX_gsm_tx,
> +	MSM_MUX_hdmi_cec,
> +	MSM_MUX_hdmi_ddc,
> +	MSM_MUX_hdmi_hpd,
> +	MSM_MUX_mdp_vsync,
> +	MSM_MUX_mss_lte,
> +	MSM_MUX_nav_pps,
> +	MSM_MUX_nav_tsync,
> +	MSM_MUX_qdss_cti_trig_in_a,
> +	MSM_MUX_qdss_cti_trig_in_b,
> +	MSM_MUX_qdss_cti_trig_in_c,
> +	MSM_MUX_qdss_cti_trig_in_d,
> +	MSM_MUX_qdss_cti_trig_out_a,
> +	MSM_MUX_qdss_cti_trig_out_b,
> +	MSM_MUX_qdss_cti_trig_out_c,
> +	MSM_MUX_qdss_cti_trig_out_d,
> +	MSM_MUX_qdss_traceclk_a,
> +	MSM_MUX_qdss_traceclk_b,
> +	MSM_MUX_qdss_tracectl_a,
> +	MSM_MUX_qdss_tracectl_b,
> +	MSM_MUX_qdss_tracedata_a,
> +	MSM_MUX_qdss_tracedata_b,
> +	MSM_MUX_qua_mi2s,
> +	MSM_MUX_pci_e0,
> +	MSM_MUX_pci_e1,
> +	MSM_MUX_pri_mi2s,
> +	MSM_MUX_rffe1,
> +	MSM_MUX_rffe2,
> +	MSM_MUX_rffe3,
> +	MSM_MUX_rffe4,
> +	MSM_MUX_rffe5,
> +	MSM_MUX_rffe6,
> +	MSM_MUX_rffe7,
> +	MSM_MUX_sdc4,
> +	MSM_MUX_sec_mi2s,
> +	MSM_MUX_slimbus,
> +	MSM_MUX_spkr_mi2s,
> +	MSM_MUX_ter_mi2s,
> +	MSM_MUX_tsif1,
> +	MSM_MUX_tsif2,
> +	MSM_MUX_uim1,
> +	MSM_MUX_uim2,
> +	MSM_MUX_uim3,
> +	MSM_MUX_uim4,
> +	MSM_MUX_uim_batt_alarm,
> +	MSM_MUX_gpio,
> +	MSM_MUX_NA,
> +};
> +
> +static const char * const gpio_groups[] = {
> +	"gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7",
> +	"gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14",
> +	"gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21",
> +	"gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28",
> +	"gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
> +	"gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
> +	"gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49",
> +	"gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56",
> +	"gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63",
> +	"gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69", "gpio70",
> +	"gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76", "gpio77",
> +	"gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", "gpio84",
> +	"gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90", "gpio91",
> +	"gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97", "gpio98",
> +	"gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104",
> +	"gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110",
> +	"gpio111", "gpio112", "gpio113", "gpio114", "gpio115", "gpio116",
> +	"gpio117", "gpio118", "gpio119", "gpio120", "gpio121", "gpio122",
> +	"gpio123", "gpio124", "gpio125", "gpio126", "gpio127", "gpio128",
> +	"gpio129", "gpio130", "gpio131", "gpio132", "gpio133", "gpio134",
> +	"gpio135", "gpio136", "gpio137", "gpio138", "gpio139", "gpio140",
> +	"gpio141", "gpio142", "gpio143", "gpio144", "gpio145",
> +};
> +
> +static const char * const blsp_spi1_groups[] = {
> +	"gpio0", "gpio1", "gpio2", "gpio3"
> +};
> +static const char * const blsp_uart1_groups[] = {
> +	"gpio0", "gpio1", "gpio2", "gpio3"
> +};
> +static const char * const blsp_uim1_groups[] = {
> +	"gpio0", "gpio1"
> +};
> +static const char * const blsp_i2c1_groups[] = {
> +	"gpio2", "gpio3"
> +};
> +static const char * const blsp_spi2_groups[] = {
> +	"gpio4", "gpio5", "gpio6", "gpio7"
> +};
> +static const char * const blsp_uart2_groups[] = {
> +	"gpio4", "gpio5", "gpio6", "gpio7"
> +};
> +static const char * const blsp_uim2_groups[] = {
> +	"gpio4", "gpio5"
> +};
> +static const char * const qdss_cti_trig_out_b_groups[] = {
> +	"gpio4",
> +};
> +static const char * const qdss_cti_trig_in_b_groups[] = {
> +	"gpio5",
> +};
> +static const char * const blsp_i2c2_groups[] = {
> +	"gpio6", "gpio7"
> +};
> +static const char * const blsp_spi3_groups[] = {
> +	"gpio8", "gpio9", "gpio10", "gpio11"
> +};
> +static const char * const blsp_uart3_groups[] = {
> +	"gpio8", "gpio9", "gpio10", "gpio11"
> +};
> +static const char * const blsp_uim3_groups[] = {
> +	"gpio8", "gpio9"
> +};
> +static const char * const blsp_spi1_cs1_groups[] = {
> +	"gpio8"
> +};
> +static const char * const blsp_spi1_cs2_groups[] = {
> +	"gpio9", "gpio11"
> +};
> +static const char * const mdp_vsync_groups[] = {
> +	"gpio10", "gpio11", "gpio12"
> +};
> +static const char * const blsp_i2c3_groups[] = {
> +	"gpio10", "gpio11"
> +};
> +static const char * const blsp_spi1_cs3_groups[] = {
> +	"gpio10"
> +};
> +static const char * const qdss_tracedata_b_groups[] = {
> +	"gpio13", "gpio14", "gpio15", "gpio16", "gpio17", "gpio18",
> +	"gpio19", "gpio21", "gpio22", "gpio23", "gpio25", "gpio26",
> +	"gpio57", "gpio58", "gpio92", "gpio93",
> +};
> +static const char * const cam_mclk0_groups[] = {
> +	"gpio13"
> +};
> +static const char * const cam_mclk1_groups[] = {
> +	"gpio14"
> +};
> +static const char * const cam_mclk2_groups[] = {
> +	"gpio15"
> +};
> +static const char * const cam_mclk3_groups[] = {
> +	"gpio16"
> +};
> +static const char * const cci_i2c0_groups[] = {
> +	"gpio17", "gpio18"
> +};
> +static const char * const blsp_spi4_groups[] = {
> +	"gpio17", "gpio18", "gpio19", "gpio20"
> +};
> +static const char * const blsp_uart4_groups[] = {
> +	"gpio17", "gpio18", "gpio19", "gpio20"
> +};
> +static const char * const blsp_uim4_groups[] = {
> +	"gpio17", "gpio18"
> +};
> +static const char * const cci_i2c1_groups[] = {
> +	"gpio19", "gpio20"
> +};
> +static const char * const blsp_i2c4_groups[] = {
> +	"gpio19", "gpio20"
> +};
> +static const char * const cci_timer0_groups[] = {
> +	"gpio21"
> +};
> +static const char * const blsp_spi5_groups[] = {
> +	"gpio21", "gpio22", "gpio23", "gpio24"
> +};
> +static const char * const blsp_uart5_groups[] = {
> +	"gpio21", "gpio22", "gpio23", "gpio24"
> +};
> +static const char * const blsp_uim5_groups[] = {
> +	"gpio21", "gpio22"
> +};
> +static const char * const cci_timer1_groups[] = {
> +	"gpio22"
> +};
> +static const char * const cci_timer2_groups[] = {
> +	"gpio23"
> +};
> +static const char * const blsp_i2c5_groups[] = {
> +	"gpio23", "gpio24"
> +};
> +static const char * const cci_timer3_groups[] = {
> +	"gpio24"
> +};
> +static const char * const cci_async_in1_groups[] = {
> +	"gpio24"
> +};
> +static const char * const cci_timer4_groups[] = {
> +	"gpio25"
> +};
> +static const char * const cci_async_in2_groups[] = {
> +	"gpio25"
> +};
> +static const char * const blsp_spi6_groups[] = {
> +	"gpio25", "gpio26", "gpio27", "gpio28"
> +};
> +static const char * const blsp_uart6_groups[] = {
> +	"gpio25", "gpio26", "gpio27", "gpio28"
> +};
> +static const char * const blsp_uim6_groups[] = {
> +	"gpio25", "gpio26"
> +};
> +static const char * const cci_async_in0_groups[] = {
> +	"gpio26"
> +};
> +static const char * const gp0_clk_groups[] = {
> +	"gpio26"
> +};
> +static const char * const gp1_clk_groups[] = {
> +	"gpio27", "gpio57", "gpio78"
> +};
> +static const char * const blsp_i2c6_groups[] = {
> +	"gpio27", "gpio28"
> +};
> +static const char * const qdss_tracectl_a_groups[] = {
> +	"gpio27",
> +};
> +static const char * const qdss_traceclk_a_groups[] = {
> +	"gpio28",
> +};
> +static const char * const gp_mn_groups[] = {
> +	"gpio29"
> +};
> +static const char * const hdmi_cec_groups[] = {
> +	"gpio31"
> +};
> +static const char * const hdmi_ddc_groups[] = {
> +	"gpio32", "gpio33"
> +};
> +static const char * const hdmi_hpd_groups[] = {
> +	"gpio34"
> +};
> +static const char * const uim3_groups[] = {
> +	"gpio35", "gpio36", "gpio37", "gpio38"
> +};
> +static const char * const pci_e1_groups[] = {
> +	"gpio35", "gpio36",
> +};
> +static const char * const blsp_spi7_groups[] = {
> +	"gpio41", "gpio42", "gpio43", "gpio44"
> +};
> +static const char * const blsp_uart7_groups[] = {
> +	"gpio41", "gpio42", "gpio43", "gpio44"
> +};
> +static const char * const blsp_uim7_groups[] = {
> +	"gpio41", "gpio42"
> +};
> +static const char * const qdss_cti_trig_out_c_groups[] = {
> +	"gpio41",
> +};
> +static const char * const qdss_cti_trig_in_c_groups[] = {
> +	"gpio42",
> +};
> +static const char * const blsp_i2c7_groups[] = {
> +	"gpio43", "gpio44"
> +};
> +static const char * const blsp_spi8_groups[] = {
> +	"gpio45", "gpio46", "gpio47", "gpio48"
> +};
> +static const char * const blsp_uart8_groups[] = {
> +	"gpio45", "gpio46", "gpio47", "gpio48"
> +};
> +static const char * const blsp_uim8_groups[] = {
> +	"gpio45", "gpio46"
> +};
> +static const char * const blsp_i2c8_groups[] = {
> +	"gpio47", "gpio48"
> +};
> +static const char * const blsp_spi10_cs1_groups[] = {
> +	"gpio47", "gpio67"
> +};
> +static const char * const blsp_spi10_cs2_groups[] = {
> +	"gpio48", "gpio68"
> +};
> +static const char * const uim2_groups[] = {
> +	"gpio49", "gpio50", "gpio51", "gpio52"
> +};
> +static const char * const blsp_spi9_groups[] = {
> +	"gpio49", "gpio50", "gpio51", "gpio52"
> +};
> +static const char * const blsp_uart9_groups[] = {
> +	"gpio49", "gpio50", "gpio51", "gpio52"
> +};
> +static const char * const blsp_uim9_groups[] = {
> +	"gpio49", "gpio50"
> +};
> +static const char * const blsp_i2c9_groups[] = {
> +	"gpio51", "gpio52"
> +};
> +static const char * const pci_e0_groups[] = {
> +	"gpio53", "gpio54",
> +};
> +static const char * const uim4_groups[] = {
> +	"gpio53", "gpio54", "gpio55", "gpio56"
> +};
> +static const char * const blsp_spi10_groups[] = {
> +	"gpio53", "gpio54", "gpio55", "gpio56"
> +};
> +static const char * const blsp_uart10_groups[] = {
> +	"gpio53", "gpio54", "gpio55", "gpio56"
> +};
> +static const char * const blsp_uim10_groups[] = {
> +	"gpio53", "gpio54"
> +};
> +static const char * const qdss_tracedata_a_groups[] = {
> +	"gpio53", "gpio54", "gpio63", "gpio64", "gpio65",
> +	"gpio66", "gpio67", "gpio74", "gpio75", "gpio76",
> +	"gpio77", "gpio85", "gpio86", "gpio87", "gpio89",
> +	"gpio90"
> +};
> +static const char * const gp_pdm0_groups[] = {
> +	"gpio54", "gpio95"
> +};
> +static const char * const blsp_i2c10_groups[] = {
> +	"gpio55", "gpio56"
> +};
> +static const char * const qdss_cti_trig_in_a_groups[] = {
> +	"gpio55",
> +};
> +static const char * const qdss_cti_trig_out_a_groups[] = {
> +	"gpio56",
> +};
> +static const char * const qua_mi2s_groups[] = {
> +	"gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63",
> +};
> +static const char * const gcc_gp_clk1_groups[] = {
> +	"gpio57", "gpio78"
> +};
> +static const char * const gcc_gp_clk2_groups[] = {
> +	"gpio58", "gpio81"
> +};
> +static const char * const gcc_gp_clk3_groups[] = {
> +	"gpio59", "gpio82"
> +};
> +static const char * const blsp_spi2_cs1_groups[] = {
> +	"gpio62"
> +};
> +static const char * const blsp_spi2_cs2_groups[] = {
> +	"gpio63"
> +};
> +static const char * const gp_pdm2_groups[] = {
> +	"gpio63", "gpio79"
> +};
> +static const char * const pri_mi2s_groups[] = {
> +	"gpio64", "gpio65", "gpio66", "gpio67", "gpio68"
> +};
> +static const char * const blsp_spi2_cs3_groups[] = {
> +	"gpio66"
> +};
> +static const char * const spkr_mi2s_groups[] = {
> +	"gpio69", "gpio70", "gpio71", "gpio72"
> +};
> +static const char * const audio_ref_clk_groups[] = {
> +	"gpio69"
> +};
> +static const char * const slimbus_groups[] = {
> +	"gpio70", "gpio71"
> +};
> +static const char * const ter_mi2s_groups[] = {
> +	"gpio73", "gpio74", "gpio75", "gpio76", "gpio77"
> +};
> +static const char * const gp_pdm1_groups[] = {
> +	"gpio74", "gpio86"
> +};
> +static const char * const sec_mi2s_groups[] = {
> +	"gpio78", "gpio79", "gpio80", "gpio81", "gpio82"
> +};
> +static const char * const blsp_spi11_groups[] = {
> +	"gpio81", "gpio82", "gpio83", "gpio84"
> +};
> +static const char * const blsp_uart11_groups[] = {
> +	"gpio81", "gpio82", "gpio83", "gpio84"
> +};
> +static const char * const blsp_uim11_groups[] = {
> +	"gpio81", "gpio82"
> +};
> +static const char * const blsp_i2c11_groups[] = {
> +	"gpio83", "gpio84"
> +};
> +static const char * const blsp_uart12_groups[] = {
> +	"gpio85", "gpio86", "gpio87", "gpio88"
> +};
> +static const char * const blsp_uim12_groups[] = {
> +	"gpio85", "gpio86"
> +};
> +static const char * const blsp_i2c12_groups[] = {
> +	"gpio87", "gpio88"
> +};
> +static const char * const blsp_spi12_groups[] = {
> +	"gpio85", "gpio86", "gpio87", "gpio88"
> +};
> +static const char * const tsif1_groups[] = {
> +	"gpio89", "gpio90", "gpio91", "gpio110", "gpio111"
> +};
> +static const char * const blsp_spi10_cs3_groups[] = {
> +	"gpio90"
> +};
> +static const char * const sdc4_groups[] = {
> +	"gpio91", "gpio92", "gpio93", "gpio94", "gpio95", "gpio96"
> +};
> +static const char * const qdss_traceclk_b_groups[] = {
> +	"gpio91",
> +};
> +static const char * const tsif2_groups[] = {
> +	"gpio92", "gpio93", "gpio94", "gpio95", "gpio96"
> +};
> +static const char * const qdss_tracectl_b_groups[] = {
> +	"gpio94",
> +};
> +static const char * const qdss_cti_trig_out_d_groups[] = {
> +	"gpio95",
> +};
> +static const char * const qdss_cti_trig_in_d_groups[] = {
> +	"gpio96",
> +};
> +static const char * const uim1_groups[] = {
> +	"gpio97", "gpio98", "gpio99", "gpio100"
> +};
> +static const char * const uim_batt_alarm_groups[] = {
> +	"gpio101"
> +};
> +static const char * const blsp11_uart_tx_b_groups[] = {
> +	"gpio111"
> +};
> +static const char * const blsp11_uart_rx_b_groups[] = {
> +	"gpio112"
> +};
> +static const char * const blsp11_i2c_sda_b_groups[] = {
> +	"gpio113"
> +};
> +static const char * const blsp11_i2c_scl_b_groups[] = {
> +	"gpio114"
> +};
> +static const char * const grfc_groups[] = {
> +	"gpio115", "gpio116", "gpio117", "gpio118", "gpio119", "gpio120",
> +	"gpio121", "gpio122", "gpio123", "gpio124", "gpio125", "gpio126",
> +	"gpio127", "gpio128", "gpio129", "gpio133"
> +};
> +static const char * const rffe6_groups[] = {
> +	"gpio115", "gpio116"
> +};
> +static const char * const rffe7_groups[] = {
> +	"gpio117", "gpio118"
> +};
> +static const char * const gsm_tx_groups[] = {
> +	"gpio126", "gpio131", "gpio132", "gpio133"
> +};
> +static const char * const nav_tsync_groups[] = {
> +	"gpio127"
> +};
> +static const char * const nav_pps_groups[] = {
> +	"gpio127"
> +};
> +static const char * const gps_tx_groups[] = {
> +	"gpio130"
> +};
> +static const char * const mss_lte_groups[] = {
> +	"gpio134", "gpio135"
> +};
> +static const char * const rffe1_groups[] = {
> +	"gpio136", "gpio137"
> +};
> +static const char * const rffe2_groups[] = {
> +	"gpio138", "gpio139"
> +};
> +static const char * const rffe3_groups[] = {
> +	"gpio140", "gpio141"
> +};
> +static const char * const rffe4_groups[] = {
> +	"gpio142", "gpio143"
> +};
> +static const char * const rffe5_groups[] = {
> +	"gpio144", "gpio145"
> +};
> +
> +static const struct msm_function msm8994_functions[] = {
> +	FUNCTION(audio_ref_clk),
> +	FUNCTION(blsp_i2c1),
> +	FUNCTION(blsp_i2c2),
> +	FUNCTION(blsp_i2c3),
> +	FUNCTION(blsp_i2c4),
> +	FUNCTION(blsp_i2c5),
> +	FUNCTION(blsp_i2c6),
> +	FUNCTION(blsp_i2c7),
> +	FUNCTION(blsp_i2c8),
> +	FUNCTION(blsp_i2c9),
> +	FUNCTION(blsp_i2c10),
> +	FUNCTION(blsp_i2c11),
> +	FUNCTION(blsp_i2c12),
> +	FUNCTION(blsp_spi1),
> +	FUNCTION(blsp_spi1_cs1),
> +	FUNCTION(blsp_spi1_cs2),
> +	FUNCTION(blsp_spi1_cs3),
> +	FUNCTION(blsp_spi2),
> +	FUNCTION(blsp_spi2_cs1),
> +	FUNCTION(blsp_spi2_cs2),
> +	FUNCTION(blsp_spi2_cs3),
> +	FUNCTION(blsp_spi3),
> +	FUNCTION(blsp_spi4),
> +	FUNCTION(blsp_spi5),
> +	FUNCTION(blsp_spi6),
> +	FUNCTION(blsp_spi7),
> +	FUNCTION(blsp_spi8),
> +	FUNCTION(blsp_spi9),
> +	FUNCTION(blsp_spi10),
> +	FUNCTION(blsp_spi10_cs1),
> +	FUNCTION(blsp_spi10_cs2),
> +	FUNCTION(blsp_spi10_cs3),
> +	FUNCTION(blsp_spi11),
> +	FUNCTION(blsp_spi12),
> +	FUNCTION(blsp_uart1),
> +	FUNCTION(blsp_uart2),
> +	FUNCTION(blsp_uart3),
> +	FUNCTION(blsp_uart4),
> +	FUNCTION(blsp_uart5),
> +	FUNCTION(blsp_uart6),
> +	FUNCTION(blsp_uart7),
> +	FUNCTION(blsp_uart8),
> +	FUNCTION(blsp_uart9),
> +	FUNCTION(blsp_uart10),
> +	FUNCTION(blsp_uart11),
> +	FUNCTION(blsp_uart12),
> +	FUNCTION(blsp_uim1),
> +	FUNCTION(blsp_uim2),
> +	FUNCTION(blsp_uim3),
> +	FUNCTION(blsp_uim4),
> +	FUNCTION(blsp_uim5),
> +	FUNCTION(blsp_uim6),
> +	FUNCTION(blsp_uim7),
> +	FUNCTION(blsp_uim8),
> +	FUNCTION(blsp_uim9),
> +	FUNCTION(blsp_uim10),
> +	FUNCTION(blsp_uim11),
> +	FUNCTION(blsp_uim12),
> +	FUNCTION(blsp11_i2c_scl_b),
> +	FUNCTION(blsp11_i2c_sda_b),
> +	FUNCTION(blsp11_uart_rx_b),
> +	FUNCTION(blsp11_uart_tx_b),
> +	FUNCTION(cam_mclk0),
> +	FUNCTION(cam_mclk1),
> +	FUNCTION(cam_mclk2),
> +	FUNCTION(cam_mclk3),
> +	FUNCTION(cci_async_in0),
> +	FUNCTION(cci_async_in1),
> +	FUNCTION(cci_async_in2),
> +	FUNCTION(cci_i2c0),
> +	FUNCTION(cci_i2c1),
> +	FUNCTION(cci_timer0),
> +	FUNCTION(cci_timer1),
> +	FUNCTION(cci_timer2),
> +	FUNCTION(cci_timer3),
> +	FUNCTION(cci_timer4),
> +	FUNCTION(gcc_gp_clk1),
> +	FUNCTION(gcc_gp_clk2),
> +	FUNCTION(gcc_gp_clk3),
> +	FUNCTION(gp_mn),
> +	FUNCTION(gp_pdm0),
> +	FUNCTION(gp_pdm1),
> +	FUNCTION(gp_pdm2),
> +	FUNCTION(gp0_clk),
> +	FUNCTION(gp1_clk),
> +	FUNCTION(gps_tx),
> +	FUNCTION(grfc),
> +	FUNCTION(gsm_tx),
> +	FUNCTION(hdmi_cec),
> +	FUNCTION(hdmi_ddc),
> +	FUNCTION(hdmi_hpd),
> +	FUNCTION(mdp_vsync),
> +	FUNCTION(mss_lte),
> +	FUNCTION(nav_pps),
> +	FUNCTION(nav_tsync),
> +	FUNCTION(qdss_cti_trig_in_a),
> +	FUNCTION(qdss_cti_trig_in_b),
> +	FUNCTION(qdss_cti_trig_in_c),
> +	FUNCTION(qdss_cti_trig_in_d),
> +	FUNCTION(qdss_cti_trig_out_a),
> +	FUNCTION(qdss_cti_trig_out_b),
> +	FUNCTION(qdss_cti_trig_out_c),
> +	FUNCTION(qdss_cti_trig_out_d),
> +	FUNCTION(qdss_traceclk_a),
> +	FUNCTION(qdss_traceclk_b),
> +	FUNCTION(qdss_tracectl_a),
> +	FUNCTION(qdss_tracectl_b),
> +	FUNCTION(qdss_tracedata_a),
> +	FUNCTION(qdss_tracedata_b),
> +	FUNCTION(qua_mi2s),
> +	FUNCTION(pci_e0),
> +	FUNCTION(pci_e1),
> +	FUNCTION(pri_mi2s),
> +	FUNCTION(rffe1),
> +	FUNCTION(rffe2),
> +	FUNCTION(rffe3),
> +	FUNCTION(rffe4),
> +	FUNCTION(rffe5),
> +	FUNCTION(rffe6),
> +	FUNCTION(rffe7),
> +	FUNCTION(sdc4),
> +	FUNCTION(sec_mi2s),
> +	FUNCTION(slimbus),
> +	FUNCTION(spkr_mi2s),
> +	FUNCTION(ter_mi2s),
> +	FUNCTION(tsif1),
> +	FUNCTION(tsif2),
> +	FUNCTION(uim_batt_alarm),
> +	FUNCTION(uim1),
> +	FUNCTION(uim2),
> +	FUNCTION(uim3),
> +	FUNCTION(uim4),
> +	FUNCTION(gpio),
> +};
> +
> +static const struct msm_pingroup msm8994_groups[] = {
> +	PINGROUP(0,   blsp_spi1, blsp_uart1, blsp_uim1, NA, NA, NA, NA, NA, NA,
> +		 NA, NA),
> +	PINGROUP(1,   blsp_spi1, blsp_uart1, blsp_uim1, NA, NA, NA, NA, NA, NA,
> +		 NA, NA),
> +	PINGROUP(2,   blsp_spi1, blsp_uart1, blsp_i2c1, NA, NA, NA, NA, NA, NA,
> +		 NA, NA),
> +	PINGROUP(3,   blsp_spi1, blsp_uart1, blsp_i2c1, NA, NA, NA, NA, NA, NA,
> +		 NA, NA),
> +	PINGROUP(4,   blsp_spi2, blsp_uart2, blsp_uim2, qdss_cti_trig_out_b,
> +		 NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(5,   blsp_spi2, blsp_uart2, blsp_uim2, qdss_cti_trig_in_b, NA,
> +		 NA, NA, NA, NA, NA, NA),
> +	PINGROUP(6,   blsp_spi2, blsp_uart2, blsp_i2c2, NA, NA, NA, NA, NA, NA,
> +		 NA, NA),
> +	PINGROUP(7,   blsp_spi2, blsp_uart2, blsp_i2c2, NA, NA, NA, NA, NA, NA,
> +		 NA, NA),
> +	PINGROUP(8,   blsp_spi3, blsp_uart3, blsp_uim3, blsp_spi1_cs1, NA, NA,
> +		 NA, NA, NA, NA, NA),
> +	PINGROUP(9,   blsp_spi3, blsp_uart3, blsp_uim3, blsp_spi1_cs2, NA, NA,
> +		 NA, NA, NA, NA, NA),
> +	PINGROUP(10,  mdp_vsync, blsp_spi3, blsp_uart3, blsp_i2c3,
> +		 blsp_spi1_cs3, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(11,  mdp_vsync, blsp_spi3, blsp_uart3, blsp_i2c3,
> +		 blsp_spi1_cs2, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(12,  mdp_vsync, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(13,  cam_mclk0, NA, NA, qdss_tracedata_b, NA, NA, NA, NA, NA,
> +		 NA, NA),
> +	PINGROUP(14,  cam_mclk1, NA, NA, qdss_tracedata_b, NA, NA, NA, NA, NA,
> +		 NA, NA),
> +	PINGROUP(15,  cam_mclk2, NA, qdss_tracedata_b, NA, NA, NA, NA, NA, NA,
> +		 NA, NA),
> +	PINGROUP(16,  cam_mclk3, NA, qdss_tracedata_b, NA, NA, NA, NA, NA, NA,
> +		 NA, NA),
> +	PINGROUP(17,  cci_i2c0, blsp_spi4, blsp_uart4, blsp_uim4, NA,
> +		 qdss_tracedata_b, NA, NA, NA, NA, NA),
> +	PINGROUP(18,  cci_i2c0, blsp_spi4, blsp_uart4, blsp_uim4, NA,
> +		 qdss_tracedata_b, NA, NA, NA, NA, NA),
> +	PINGROUP(19,  cci_i2c1, blsp_spi4, blsp_uart4, blsp_i2c4, NA,
> +		 qdss_tracedata_b, NA, NA, NA, NA, NA),
> +	PINGROUP(20,  cci_i2c1, blsp_spi4, blsp_uart4, blsp_i2c4, NA, NA, NA,
> +		 NA, NA, NA, NA),
> +	PINGROUP(21,  cci_timer0, blsp_spi5, blsp_uart5, blsp_uim5, NA,
> +		 qdss_tracedata_b, NA, NA, NA, NA, NA),
> +	PINGROUP(22,  cci_timer1, blsp_spi5, blsp_uart5, blsp_uim5, NA,
> +		 qdss_tracedata_b, NA, NA, NA, NA, NA),
> +	PINGROUP(23,  cci_timer2, blsp_spi5, blsp_uart5, blsp_i2c5, NA, NA,
> +		 qdss_tracedata_b, NA, NA, NA, NA),
> +	PINGROUP(24,  cci_timer3, cci_async_in1, blsp_spi5, blsp_uart5,
> +		 blsp_i2c5, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(25,  cci_timer4, cci_async_in2, blsp_spi6, blsp_uart6,
> +		 blsp_uim6, NA, NA, qdss_tracedata_b, NA, NA, NA),
> +	PINGROUP(26,  cci_async_in0, blsp_spi6, blsp_uart6, blsp_uim6, gp0_clk,
> +		 NA, qdss_tracedata_b, NA, NA, NA, NA),
> +	PINGROUP(27,  blsp_spi6, blsp_uart6, blsp_i2c6, gp1_clk,
> +		 qdss_tracectl_a, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(28,  blsp_spi6, blsp_uart6, blsp_i2c6, qdss_traceclk_a, NA,
> +		 NA, NA, NA, NA, NA, NA),
> +	PINGROUP(29,  gp_mn, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(30,  NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(31,  hdmi_cec, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(32,  hdmi_ddc, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(33,  hdmi_ddc, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(34,  hdmi_hpd, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(35,  uim3, pci_e1, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(36,  uim3, pci_e1, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(37,  uim3, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(38,  uim3, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(39,  NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(40,  NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(41,  blsp_spi7, blsp_uart7, blsp_uim7, qdss_cti_trig_out_c,
> +		 NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(42,  blsp_spi7, blsp_uart7, blsp_uim7, qdss_cti_trig_in_c, NA,
> +		 NA, NA, NA, NA, NA, NA),
> +	PINGROUP(43,  blsp_spi7, blsp_uart7, blsp_i2c7, NA, NA, NA, NA, NA, NA,
> +		 NA, NA),
> +	PINGROUP(44,  blsp_spi7, blsp_uart7, blsp_i2c7, NA, NA, NA, NA, NA, NA,
> +		 NA, NA),
> +	PINGROUP(45,  blsp_spi8, blsp_uart8, blsp_uim8, NA, NA, NA, NA, NA, NA,
> +		 NA, NA),
> +	PINGROUP(46,  blsp_spi8, blsp_uart8, blsp_uim8, NA, NA, NA, NA, NA, NA,
> +		 NA, NA),
> +	PINGROUP(47,  blsp_spi8, blsp_uart8, blsp_i2c8, blsp_spi10_cs1, NA, NA,
> +		 NA, NA, NA, NA, NA),
> +	PINGROUP(48,  blsp_spi8, blsp_uart8, blsp_i2c8, blsp_spi10_cs2, NA, NA,
> +		 NA, NA, NA, NA, NA),
> +	PINGROUP(49,  uim2, blsp_spi9, blsp_uart9, blsp_uim9, NA, NA, NA, NA,
> +		 NA, NA, NA),
> +	PINGROUP(50,  uim2, blsp_spi9, blsp_uart9, blsp_uim9, NA, NA, NA, NA,
> +		 NA, NA, NA),
> +	PINGROUP(51,  uim2, blsp_spi9, blsp_uart9, blsp_i2c9, NA, NA, NA, NA,
> +		 NA, NA, NA),
> +	PINGROUP(52,  uim2, blsp_spi9, blsp_uart9, blsp_i2c9, NA, NA, NA, NA,
> +		 NA, NA, NA),
> +	PINGROUP(53,  uim4, pci_e0, blsp_spi10, blsp_uart10, blsp_uim10, NA,
> +		 NA, NA, NA, qdss_tracedata_a, NA),
> +	PINGROUP(54,  uim4, pci_e0, blsp_spi10, blsp_uart10, blsp_uim10,
> +		 gp_pdm0, NA, NA, NA, NA, qdss_tracedata_a),
> +	PINGROUP(55,  uim4, blsp_spi10, blsp_uart10, blsp_i2c10, NA, NA, NA,
> +		 NA, NA, qdss_cti_trig_in_a, NA),
> +	PINGROUP(56,  uim4, blsp_spi10, blsp_uart10, blsp_i2c10, NA, NA, NA,
> +		 NA, qdss_cti_trig_out_a, NA, NA),
> +	PINGROUP(57,  qua_mi2s, gcc_gp_clk1, NA, NA, NA, NA, qdss_tracedata_b,
> +		 NA, NA, NA, NA),
> +	PINGROUP(58,  qua_mi2s, gcc_gp_clk2, NA, NA, NA, NA, qdss_tracedata_b,
> +		 NA, NA, NA, NA),
> +	PINGROUP(59,  qua_mi2s, gcc_gp_clk3, NA, NA, NA, NA, NA, NA, NA, NA,
> +		 NA),
> +	PINGROUP(60,  qua_mi2s, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(61,  qua_mi2s, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(62,  qua_mi2s, blsp_spi2_cs1, NA, NA, NA, NA, NA, NA, NA, NA,
> +		 NA),
> +	PINGROUP(63,  qua_mi2s, blsp_spi2_cs2, gp_pdm2, NA, NA, NA, NA, NA,
> +		 qdss_tracedata_a, NA, NA),
> +	PINGROUP(64,  pri_mi2s, NA, NA, NA, NA, NA, qdss_tracedata_a, NA, NA,
> +		 NA, NA),
> +	PINGROUP(65,  pri_mi2s, NA, NA, NA, NA, NA, qdss_tracedata_a, NA, NA,
> +		 NA, NA),
> +	PINGROUP(66,  pri_mi2s, blsp_spi2_cs3, NA, NA, NA, NA, NA,
> +		 qdss_tracedata_a, NA, NA, NA),
> +	PINGROUP(67,  pri_mi2s, blsp_spi10_cs1, NA, NA, NA, NA, NA,
> +		 qdss_tracedata_a, NA, NA, NA),
> +	PINGROUP(68,  pri_mi2s, blsp_spi10_cs2, NA, NA, NA, NA, NA, NA, NA, NA,
> +		 NA),
> +	PINGROUP(69,  spkr_mi2s, audio_ref_clk, NA, NA, NA, NA, NA, NA, NA, NA,
> +		 NA),
> +	PINGROUP(70,  slimbus, spkr_mi2s, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(71,  slimbus, spkr_mi2s, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(72,  spkr_mi2s, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(73,  ter_mi2s, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(74,  ter_mi2s, gp_pdm1, NA, NA, NA, NA, NA, qdss_tracedata_a,
> +		 NA, NA, NA),
> +	PINGROUP(75,  ter_mi2s, NA, NA, NA, NA, qdss_tracedata_a, NA, NA, NA,
> +		 NA, NA),
> +	PINGROUP(76,  ter_mi2s, NA, NA, NA, NA, qdss_tracedata_a, NA, NA, NA,
> +		 NA, NA),
> +	PINGROUP(77,  ter_mi2s, NA, NA, NA, NA, qdss_tracedata_a, NA, NA, NA,
> +		 NA, NA),
> +	PINGROUP(78,  sec_mi2s, gcc_gp_clk1, NA, NA, NA, NA, NA, NA, NA, NA,
> +		 NA),
> +	PINGROUP(79,  sec_mi2s, gp_pdm2, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(80,  sec_mi2s, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(81,  sec_mi2s, blsp_spi11, blsp_uart11, blsp_uim11,
> +		 gcc_gp_clk2, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(82,  sec_mi2s, blsp_spi11, blsp_uart11, blsp_uim11,
> +		 gcc_gp_clk3, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(83,  blsp_spi11, blsp_uart11, blsp_i2c11, NA, NA, NA, NA, NA,
> +		 NA, NA, NA),
> +	PINGROUP(84,  blsp_spi11, blsp_uart11, blsp_i2c11, NA, NA, NA, NA, NA,
> +		 NA, NA, NA),
> +	PINGROUP(85,  blsp_spi12, blsp_uart12, blsp_uim12, NA, NA,
> +		 qdss_tracedata_a, NA, NA, NA, NA, NA),
> +	PINGROUP(86,  blsp_spi12, blsp_uart12, blsp_uim12, gp_pdm1, NA,
> +		 qdss_tracedata_a, NA, NA, NA, NA, NA),
> +	PINGROUP(87,  blsp_spi12, blsp_uart12, blsp_i2c12, NA,
> +		 qdss_tracedata_a, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(88,  blsp_spi12, blsp_uart12, blsp_i2c12, NA, NA, NA, NA, NA,
> +		 NA, NA, NA),
> +	PINGROUP(89,  tsif1, NA, qdss_tracedata_a, NA, NA, NA, NA, NA, NA, NA,
> +		 NA),
> +	PINGROUP(90,  tsif1, blsp_spi10_cs3, qdss_tracedata_a, NA, NA, NA, NA,
> +		 NA, NA, NA, NA),
> +	PINGROUP(91,  tsif1, sdc4, NA, NA, NA, NA, qdss_traceclk_b, NA, NA, NA,
> +		 NA),
> +	PINGROUP(92,  tsif2, sdc4, NA, NA, qdss_tracedata_b, NA, NA, NA, NA,
> +		 NA, NA),
> +	PINGROUP(93,  tsif2, sdc4, NA, NA, NA, NA, qdss_tracedata_b, NA, NA,
> +		 NA, NA),
> +	PINGROUP(94,  tsif2, sdc4, NA, NA, NA, NA, qdss_tracectl_b, NA, NA, NA,
> +		 NA),
> +	PINGROUP(95,  tsif2, sdc4, gp_pdm0, NA, NA, NA, qdss_cti_trig_out_d,
> +		 NA, NA, NA, NA),
> +	PINGROUP(96,  tsif2, sdc4, qdss_cti_trig_in_d, NA, NA, NA, NA, NA, NA,
> +		 NA, NA),
> +	PINGROUP(97,  uim1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(98,  uim1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(99,  uim1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(100, uim1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(101, uim_batt_alarm, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(102, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(103, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(104, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(105, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(106, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(107, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(108, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(109, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(110, tsif1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(111, tsif1, blsp11_uart_tx_b, NA, NA, NA, NA, NA, NA, NA, NA,
> +		 NA),
> +	PINGROUP(112, blsp11_uart_rx_b, NA, NA, NA, NA, NA, NA, NA, NA, NA,
> +		 NA),
> +	PINGROUP(113, blsp11_i2c_sda_b, NA, NA, NA, NA, NA, NA, NA, NA, NA,
> +		 NA),
> +	PINGROUP(114, blsp11_i2c_scl_b, NA, NA, NA, NA, NA, NA, NA, NA, NA,
> +		 NA),
> +	PINGROUP(115, grfc, rffe6, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(116, grfc, rffe6, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(117, grfc, rffe7, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(118, grfc, rffe7, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(119, grfc, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(120, grfc, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(121, grfc, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(122, grfc, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(123, grfc, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(124, grfc, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(125, grfc, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(126, grfc, gsm_tx, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(127, grfc, nav_tsync, nav_pps, NA, NA, NA, NA, NA, NA, NA,
> +		 NA),
> +	PINGROUP(128, NA, grfc, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(129, grfc, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(130, gps_tx, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(131, gsm_tx, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(132, gsm_tx, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(133, gsm_tx, grfc, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(134, mss_lte, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(135, mss_lte, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(136, rffe1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(137, rffe1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(138, rffe2, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(139, rffe2, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(140, rffe3, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(141, rffe3, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(142, rffe4, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(143, rffe4, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(144, rffe5, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	PINGROUP(145, rffe5, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +	SDC_PINGROUP(sdc1_rclk, 0x2044, 15, 0),
> +	SDC_PINGROUP(sdc1_clk, 0x2044, 13, 6),
> +	SDC_PINGROUP(sdc1_cmd, 0x2044, 11, 3),
> +	SDC_PINGROUP(sdc1_data, 0x2044, 9, 0),
> +	SDC_PINGROUP(sdc2_clk, 0x2048, 14, 6),
> +	SDC_PINGROUP(sdc2_cmd, 0x2048, 11, 3),
> +	SDC_PINGROUP(sdc2_data, 0x2048, 9, 0),
> +	SDC_PINGROUP(sdc3_clk, 0x206c, 14, 6),
> +	SDC_PINGROUP(sdc3_cmd, 0x206c, 11, 3),
> +	SDC_PINGROUP(sdc3_data, 0x206c, 9, 0),
> +};
> +
> +#define NUM_GPIO_PINGROUPS 146
> +
> +static const struct msm_pinctrl_soc_data msm8994_pinctrl = {
> +	.pins = msm8994_pins,
> +	.npins = ARRAY_SIZE(msm8994_pins),
> +	.functions = msm8994_functions,
> +	.nfunctions = ARRAY_SIZE(msm8994_functions),
> +	.groups = msm8994_groups,
> +	.ngroups = ARRAY_SIZE(msm8994_groups),
> +	.ngpios = NUM_GPIO_PINGROUPS,
> +};
> +
> +static int msm8994_pinctrl_probe(struct platform_device *pdev)
> +{
> +	return msm_pinctrl_probe(pdev, &msm8994_pinctrl);
> +}
> +
> +static const struct of_device_id msm8994_pinctrl_of_match[] = {
> +	{ .compatible = "qcom,msm8994-pinctrl", },
> +	{ },
> +};
> +
> +static struct platform_driver msm8994_pinctrl_driver = {
> +	.driver = {
> +		.name = "msm8994-pinctrl",
> +		.of_match_table = msm8994_pinctrl_of_match,
> +	},
> +	.probe = msm8994_pinctrl_probe,
> +	.remove = msm_pinctrl_remove,
> +};
> +
> +static int __init msm8994_pinctrl_init(void)
> +{
> +	return platform_driver_register(&msm8994_pinctrl_driver);
> +}
> +arch_initcall(msm8994_pinctrl_init);
> +
> +static void __exit msm8994_pinctrl_exit(void)
> +{
> +	platform_driver_unregister(&msm8994_pinctrl_driver);
> +}
> +module_exit(msm8994_pinctrl_exit);
> +
> +MODULE_DESCRIPTION("Qualcomm MSM8994 pinctrl driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DEVICE_TABLE(of, msm8994_pinctrl_of_match);
>


^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH V2] pinctrl: qcom: Add msm8994 pinctrl driver
  2016-10-26 23:32 [PATCH V2] pinctrl: qcom: Add msm8994 pinctrl driver Michael Scott
  2016-10-27  1:09 ` Jeremy McNicoll
@ 2016-10-29  8:27 ` Linus Walleij
  2016-10-29 16:26   ` Michael Scott
  2016-10-29 16:32   ` Michael Scott
  2016-10-29 18:06 ` Bjorn Andersson
  2016-10-31  4:40 ` Rob Herring
  3 siblings, 2 replies; 8+ messages in thread
From: Linus Walleij @ 2016-10-29  8:27 UTC (permalink / raw)
  To: Michael Scott, Bjorn Andersson
  Cc: linux-gpio, linux-arm-msm, devicetree, linux-kernel, Rob Herring,
	Mark Rutland, Andy Gross, David Brown, Joonwoo Park,
	Jeremy McNicoll

On Thu, Oct 27, 2016 at 1:32 AM, Michael Scott <michael.scott@linaro.org> wrote:

> Initial pinctrl driver for QCOM msm8994 platforms.
>
> In order to continue the initial board support for QCOM msm8994/msm8992
> presented in patches from Jeremy McNicoll <jeremymc@redhat.com>, let's put
> a proper pinctrl driver in place.
>
> Currently, the DT for these platforms uses the msm8x74 pinctrl driver to enable
> basic UART.  Beyond the first few pins the rest are different enough to justify
> it's own driver.
>
> Note: This driver is also be used by QCOM's msm8992 platform as it's TLM block
> is the same.
>
> - Initial formatting and style was taken from the msm8x74 pinctrl driver added
>   by Björn Andersson <bjorn.andersson@linaro.org>
> - Data was then adjusted per QCOM MSM8994 documentation for Top Level Multiplexing
> - Bindings documentation was based on qcom,msm8996-pinctrl.txt by
>   Joonwoo Park <joonwoop@codeaurora.org> and then modified for msm8994 content
>
> Signed-off-by: Michael Scott <michael.scott@linaro.org>
> ---
>
> V1 -> V2: fixed missing FUNCTION(nav_pps) and removed 3 odd newlines between blsp_i2c4_groups and cci_timer0_groups

Looks fine to me, just like the other Qcom drivers.

I just want Björn Andersson's ACK before merging, Björn?

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH V2] pinctrl: qcom: Add msm8994 pinctrl driver
  2016-10-29  8:27 ` Linus Walleij
@ 2016-10-29 16:26   ` Michael Scott
  2016-10-29 16:32   ` Michael Scott
  1 sibling, 0 replies; 8+ messages in thread
From: Michael Scott @ 2016-10-29 16:26 UTC (permalink / raw)
  To: Linus Walleij
  Cc: Mark Rutland, linux-gpio, David Brown, Andy Gross,
	Bjorn Andersson, Rob Herring, devicetree, Joonwoo Park,
	Jeremy McNicoll, linux-arm-msm, linux-kernel, Stephen Boyd

[-- Attachment #1: Type: text/plain, Size: 1926 bytes --]

On Oct 29, 2016 1:27 AM, "Linus Walleij" <linus.walleij@linaro.org> wrote:
>
> On Thu, Oct 27, 2016 at 1:32 AM, Michael Scott <michael.scott@linaro.org>
wrote:
>
> > Initial pinctrl driver for QCOM msm8994 platforms.
> >
> > In order to continue the initial board support for QCOM msm8994/msm8992
> > presented in patches from Jeremy McNicoll <jeremymc@redhat.com>, let's
put
> > a proper pinctrl driver in place.
> >
> > Currently, the DT for these platforms uses the msm8x74 pinctrl driver
to enable
> > basic UART.  Beyond the first few pins the rest are different enough to
justify
> > it's own driver.
> >
> > Note: This driver is also be used by QCOM's msm8992 platform as it's
TLM block
> > is the same.
> >
> > - Initial formatting and style was taken from the msm8x74 pinctrl
driver added
> >   by Björn Andersson <bjorn.andersson@linaro.org>
> > - Data was then adjusted per QCOM MSM8994 documentation for Top Level
Multiplexing
> > - Bindings documentation was based on qcom,msm8996-pinctrl.txt by
> >   Joonwoo Park <joonwoop@codeaurora.org> and then modified for msm8994
content
> >
> > Signed-off-by: Michael Scott <michael.scott@linaro.org>
> > ---
> >
> > V1 -> V2: fixed missing FUNCTION(nav_pps) and removed 3 odd newlines
between blsp_i2c4_groups and cci_timer0_groups
>
> Looks fine to me, just like the other Qcom drivers.
>
> I just want Björn Andersson's ACK before merging, Björn?

FYI: I asked Stephen if he could find someone else with tech docs to do a
data review.  This may or may not happen depending on the internal interest
level and/or current work load.  It will probably take a week or so to get
sorted out.

Worst case is no extra set of eyes on the data, and as issues are found we
can fix them in follow up patches.  The driver works for the current
msm8994 patches submitted by Jeremy.

Michael Scott

>
> Yours,
> Linus Walleij

[-- Attachment #2: Type: text/html, Size: 2657 bytes --]

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH V2] pinctrl: qcom: Add msm8994 pinctrl driver
  2016-10-29  8:27 ` Linus Walleij
  2016-10-29 16:26   ` Michael Scott
@ 2016-10-29 16:32   ` Michael Scott
  1 sibling, 0 replies; 8+ messages in thread
From: Michael Scott @ 2016-10-29 16:32 UTC (permalink / raw)
  To: Linus Walleij, Bjorn Andersson
  Cc: linux-gpio, linux-arm-msm, devicetree, linux-kernel, Rob Herring,
	Mark Rutland, Andy Gross, David Brown, Joonwoo Park,
	Jeremy McNicoll, Stephen Boyd

Resending: The mailing lists bounced due me being silly and replying on 
my phone.

Please reply to this email instead of the last one.

On 10/29/2016 01:27 AM, Linus Walleij wrote:
> On Thu, Oct 27, 2016 at 1:32 AM, Michael Scott <michael.scott@linaro.org> wrote:
>
>> Initial pinctrl driver for QCOM msm8994 platforms.
>>
>> In order to continue the initial board support for QCOM msm8994/msm8992
>> presented in patches from Jeremy McNicoll <jeremymc@redhat.com>, let's put
>> a proper pinctrl driver in place.
>>
>> Currently, the DT for these platforms uses the msm8x74 pinctrl driver to enable
>> basic UART.  Beyond the first few pins the rest are different enough to justify
>> it's own driver.
>>
>> Note: This driver is also be used by QCOM's msm8992 platform as it's TLM block
>> is the same.
>>
>> - Initial formatting and style was taken from the msm8x74 pinctrl driver added
>>    by Björn Andersson <bjorn.andersson@linaro.org>
>> - Data was then adjusted per QCOM MSM8994 documentation for Top Level Multiplexing
>> - Bindings documentation was based on qcom,msm8996-pinctrl.txt by
>>    Joonwoo Park <joonwoop@codeaurora.org> and then modified for msm8994 content
>>
>> Signed-off-by: Michael Scott <michael.scott@linaro.org>
>> ---
>>
>> V1 -> V2: fixed missing FUNCTION(nav_pps) and removed 3 odd newlines between blsp_i2c4_groups and cci_timer0_groups
> Looks fine to me, just like the other Qcom drivers.
>
> I just want Björn Andersson's ACK before merging, Björn?

FYI: I asked Stephen if he could find someone else with tech docs to do 
a data review.  This may or may not happen depending on the internal 
interest level and/or current work load.  It will probably take a week 
or so to get sorted out.

Worst case is no extra set of eyes on the data, and as issues are found 
we can fix them in follow up patches.  The driver works for the current 
msm8994 patches submitted by Jeremy.

Michael Scott

>
> Yours,
> Linus Walleij

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH V2] pinctrl: qcom: Add msm8994 pinctrl driver
  2016-10-26 23:32 [PATCH V2] pinctrl: qcom: Add msm8994 pinctrl driver Michael Scott
  2016-10-27  1:09 ` Jeremy McNicoll
  2016-10-29  8:27 ` Linus Walleij
@ 2016-10-29 18:06 ` Bjorn Andersson
  2016-10-31  8:33   ` Linus Walleij
  2016-10-31  4:40 ` Rob Herring
  3 siblings, 1 reply; 8+ messages in thread
From: Bjorn Andersson @ 2016-10-29 18:06 UTC (permalink / raw)
  To: Michael Scott
  Cc: linux-gpio, linux-arm-msm, devicetree, linux-kernel,
	Linus Walleij, Rob Herring, Mark Rutland, Andy Gross,
	David Brown, Joonwoo Park, Jeremy McNicoll

On Wed 26 Oct 16:32 PDT 2016, Michael Scott wrote:

> Initial pinctrl driver for QCOM msm8994 platforms.
> 
> In order to continue the initial board support for QCOM msm8994/msm8992
> presented in patches from Jeremy McNicoll <jeremymc@redhat.com>, let's put
> a proper pinctrl driver in place.
> 
> Currently, the DT for these platforms uses the msm8x74 pinctrl driver to enable
> basic UART.  Beyond the first few pins the rest are different enough to justify
> it's own driver.
> 
> Note: This driver is also be used by QCOM's msm8992 platform as it's TLM block
> is the same.
> 

I'm not up to speed on the 8992/8994 story, but please add a
"qcom,msm8992-pinctrl" compatible to the list as well.

> - Initial formatting and style was taken from the msm8x74 pinctrl driver added
>   by Björn Andersson <bjorn.andersson@linaro.org>
> - Data was then adjusted per QCOM MSM8994 documentation for Top Level Multiplexing

I think this is good enough. It looks reasonable and you based it on the
data sheet. Any fixes to the tables can be added incrementally.

> - Bindings documentation was based on qcom,msm8996-pinctrl.txt by
>   Joonwoo Park <joonwoop@codeaurora.org> and then modified for msm8994 content
> 
> Signed-off-by: Michael Scott <michael.scott@linaro.org>

Please add the compatible and you have my

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH V2] pinctrl: qcom: Add msm8994 pinctrl driver
  2016-10-26 23:32 [PATCH V2] pinctrl: qcom: Add msm8994 pinctrl driver Michael Scott
                   ` (2 preceding siblings ...)
  2016-10-29 18:06 ` Bjorn Andersson
@ 2016-10-31  4:40 ` Rob Herring
  3 siblings, 0 replies; 8+ messages in thread
From: Rob Herring @ 2016-10-31  4:40 UTC (permalink / raw)
  To: Michael Scott
  Cc: linux-gpio, linux-arm-msm, devicetree, linux-kernel,
	Linus Walleij, Mark Rutland, Andy Gross, David Brown,
	Bjorn Andersson, Joonwoo Park, Jeremy McNicoll

On Wed, Oct 26, 2016 at 04:32:28PM -0700, Michael Scott wrote:
> Initial pinctrl driver for QCOM msm8994 platforms.
> 
> In order to continue the initial board support for QCOM msm8994/msm8992
> presented in patches from Jeremy McNicoll <jeremymc@redhat.com>, let's put
> a proper pinctrl driver in place.
> 
> Currently, the DT for these platforms uses the msm8x74 pinctrl driver to enable
> basic UART.  Beyond the first few pins the rest are different enough to justify
> it's own driver.
> 
> Note: This driver is also be used by QCOM's msm8992 platform as it's TLM block
> is the same.
> 
> - Initial formatting and style was taken from the msm8x74 pinctrl driver added
>   by Björn Andersson <bjorn.andersson@linaro.org>
> - Data was then adjusted per QCOM MSM8994 documentation for Top Level Multiplexing
> - Bindings documentation was based on qcom,msm8996-pinctrl.txt by
>   Joonwoo Park <joonwoop@codeaurora.org> and then modified for msm8994 content
> 
> Signed-off-by: Michael Scott <michael.scott@linaro.org>
> ---
> 
> V1 -> V2: fixed missing FUNCTION(nav_pps) and removed 3 odd newlines between blsp_i2c4_groups and cci_timer0_groups
> 
>  .../bindings/pinctrl/qcom,msm8994-pinctrl.txt      |  175 +++

Acked-by: Rob Herring <robh@kernel.org>

>  drivers/pinctrl/qcom/Kconfig                       |    9 +
>  drivers/pinctrl/qcom/Makefile                      |    1 +
>  drivers/pinctrl/qcom/pinctrl-msm8994.c             | 1400 ++++++++++++++++++++
>  4 files changed, 1585 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt
>  create mode 100644 drivers/pinctrl/qcom/pinctrl-msm8994.c

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH V2] pinctrl: qcom: Add msm8994 pinctrl driver
  2016-10-29 18:06 ` Bjorn Andersson
@ 2016-10-31  8:33   ` Linus Walleij
  0 siblings, 0 replies; 8+ messages in thread
From: Linus Walleij @ 2016-10-31  8:33 UTC (permalink / raw)
  To: Bjorn Andersson
  Cc: Michael Scott, linux-gpio, linux-arm-msm, devicetree,
	linux-kernel, Rob Herring, Mark Rutland, Andy Gross, David Brown,
	Joonwoo Park, Jeremy McNicoll

On Sat, Oct 29, 2016 at 8:06 PM, Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:

> Please add the compatible and you have my
>
> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Michael, please add this compatible, add the ACKs and resend and I'll
queue the patch.

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2016-10-31  8:33 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-10-26 23:32 [PATCH V2] pinctrl: qcom: Add msm8994 pinctrl driver Michael Scott
2016-10-27  1:09 ` Jeremy McNicoll
2016-10-29  8:27 ` Linus Walleij
2016-10-29 16:26   ` Michael Scott
2016-10-29 16:32   ` Michael Scott
2016-10-29 18:06 ` Bjorn Andersson
2016-10-31  8:33   ` Linus Walleij
2016-10-31  4:40 ` Rob Herring

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.