From: Linus Walleij <linus.walleij@linaro.org>
To: Vladimir Zapolskiy <vz@mleia.com>
Cc: "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"open list:DRM PANEL DRIVERS" <dri-devel@lists.freedesktop.org>,
Wolfram Sang <wsa@the-dreams.de>,
"open list:GPIO SUBSYSTEM" <linux-gpio@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Sandeep_Jain@mentor.com, Mark Vasut <marek.vasut@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Lee Jones <lee.jones@linaro.org>,
Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>,
linux-media@vger.kernel.org
Subject: Re: [PATCH 1/7] dt-bindings: mfd: ds90ux9xx: add description of TI DS90Ux9xx ICs
Date: Wed, 10 Oct 2018 10:41:38 +0200 [thread overview]
Message-ID: <CACRpkdb9Lwshpt+haJur_7ESOD50t=8PE-ct-UO5yJFRfrM6Lw@mail.gmail.com> (raw)
In-Reply-To: <20181008211205.2900-2-vz@mleia.com>
On Mon, Oct 8, 2018 at 11:12 PM Vladimir Zapolskiy <vz@mleia.com> wrote:
> From: Sandeep Jain <Sandeep_Jain@mentor.com>
(...)
> +- ti,pixel-clock-edge : Selects Pixel Clock Edge.
> + Possible values are "<1>" or "<0>".
> + If "ti,pixel-clock-edge" is High <1>, output data is strobed on the
> + Rising edge of the PCLK. If ti,pixel-clock-edge is Low <0>, data is
> + strobed on the Falling edge of the PCLK.
> + If "ti,pixel-clock-edge" is not mentioned, the pixel clock edge
> + value is not touched and given by hardware pin strapping.
Please use the existing binding in
Documentation/devicetree/bindings/display/panel/display-timing.txt
for this: pixelclk-active = [<0>|<1>];
Please reference the above document in your binding.
Yours,
Linus Walleij
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
WARNING: multiple messages have this Message-ID (diff)
From: Linus Walleij <linus.walleij@linaro.org>
To: Vladimir Zapolskiy <vz@mleia.com>
Cc: Lee Jones <lee.jones@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Vasut <marek.vasut@gmail.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Wolfram Sang <wsa@the-dreams.de>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"open list:GPIO SUBSYSTEM" <linux-gpio@vger.kernel.org>,
linux-media@vger.kernel.org,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Sandeep_Jain@mentor.com,
Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>,
"open list:DRM PANEL DRIVERS" <dri-devel@lists.freedesktop.org>
Subject: Re: [PATCH 1/7] dt-bindings: mfd: ds90ux9xx: add description of TI DS90Ux9xx ICs
Date: Wed, 10 Oct 2018 10:41:38 +0200 [thread overview]
Message-ID: <CACRpkdb9Lwshpt+haJur_7ESOD50t=8PE-ct-UO5yJFRfrM6Lw@mail.gmail.com> (raw)
In-Reply-To: <20181008211205.2900-2-vz@mleia.com>
On Mon, Oct 8, 2018 at 11:12 PM Vladimir Zapolskiy <vz@mleia.com> wrote:
> From: Sandeep Jain <Sandeep_Jain@mentor.com>
(...)
> +- ti,pixel-clock-edge : Selects Pixel Clock Edge.
> + Possible values are "<1>" or "<0>".
> + If "ti,pixel-clock-edge" is High <1>, output data is strobed on the
> + Rising edge of the PCLK. If ti,pixel-clock-edge is Low <0>, data is
> + strobed on the Falling edge of the PCLK.
> + If "ti,pixel-clock-edge" is not mentioned, the pixel clock edge
> + value is not touched and given by hardware pin strapping.
Please use the existing binding in
Documentation/devicetree/bindings/display/panel/display-timing.txt
for this: pixelclk-active = [<0>|<1>];
Please reference the above document in your binding.
Yours,
Linus Walleij
WARNING: multiple messages have this Message-ID (diff)
From: Linus Walleij <linus.walleij@linaro.org>
To: Vladimir Zapolskiy <vz@mleia.com>
Cc: Lee Jones <lee.jones@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Vasut <marek.vasut@gmail.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Wolfram Sang <wsa@the-dreams.de>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"open list:GPIO SUBSYSTEM" <linux-gpio@vger.kernel.org>,
linux-media@vger.kernel.org,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Sandeep_Jain@mentor.com,
Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>,
"open list:DRM PANEL DRIVERS" <dri-devel@lists.freedesktop.org>
Subject: Re: [PATCH 1/7] dt-bindings: mfd: ds90ux9xx: add description of TI DS90Ux9xx ICs
Date: Wed, 10 Oct 2018 10:41:38 +0200 [thread overview]
Message-ID: <CACRpkdb9Lwshpt+haJur_7ESOD50t=8PE-ct-UO5yJFRfrM6Lw@mail.gmail.com> (raw)
In-Reply-To: <20181008211205.2900-2-vz@mleia.com>
On Mon, Oct 8, 2018 at 11:12 PM Vladimir Zapolskiy <vz@mleia.com> wrote:
> From: Sandeep Jain <Sandeep_Jain@mentor.com>
(...)
> +- ti,pixel-clock-edge : Selects Pixel Clock Edge.
> + Possible values are "<1>" or "<0>".
> + If "ti,pixel-clock-edge" is High <1>, output data is strobed on the
> + Rising edge of the PCLK. If ti,pixel-clock-edge is Low <0>, data is
> + strobed on the Falling edge of the PCLK.
> + If "ti,pixel-clock-edge" is not mentioned, the pixel clock edge
> + value is not touched and given by hardware pin strapping.
Please use the existing binding in
Documentation/devicetree/bindings/display/panel/display-timing.txt
for this: pixelclk-active = [<0>|<1>];
Please reference the above document in your binding.
Yours,
Linus Walleij
next prev parent reply other threads:[~2018-10-10 8:41 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-08 21:11 [PATCH 0/7] mfd/pinctrl: add initial support of TI DS90Ux9xx ICs Vladimir Zapolskiy
2018-10-08 21:11 ` [PATCH 1/7] dt-bindings: mfd: ds90ux9xx: add description " Vladimir Zapolskiy
2018-10-09 0:13 ` Marek Vasut
2018-10-09 11:11 ` Vladimir Zapolskiy
2018-10-09 20:55 ` Vladimir Zapolskiy
2018-10-09 21:03 ` Marek Vasut
2018-10-10 8:41 ` Linus Walleij [this message]
2018-10-10 8:41 ` Linus Walleij
2018-10-10 8:41 ` Linus Walleij
2018-10-12 11:44 ` Laurent Pinchart
2018-10-13 14:28 ` Vladimir Zapolskiy
2018-10-13 14:28 ` Vladimir Zapolskiy
2018-10-16 12:30 ` Laurent Pinchart
2018-10-30 16:43 ` Luca Ceresoli
2018-10-30 23:40 ` Vladimir Zapolskiy
2018-10-08 21:12 ` [PATCH 2/7] dt-bindings: mfd: ds90ux9xx: add description of TI DS90Ux9xx I2C bridge Vladimir Zapolskiy
2018-10-12 11:54 ` Laurent Pinchart
2018-10-12 11:54 ` Laurent Pinchart
2018-10-30 16:43 ` Luca Ceresoli
2018-10-31 20:12 ` Vladimir Zapolskiy
2018-11-03 21:00 ` Luca Ceresoli
2018-11-03 22:07 ` Vladimir Zapolskiy
2018-10-08 21:12 ` [PATCH 3/7] dt-bindings: pinctrl: ds90ux9xx: add description of TI DS90Ux9xx pinmux Vladimir Zapolskiy
2018-10-10 8:45 ` Linus Walleij
2018-10-10 8:45 ` Linus Walleij
2018-10-17 15:02 ` Rob Herring
2018-10-17 15:02 ` Rob Herring
2018-10-12 12:01 ` Laurent Pinchart
2018-10-13 13:47 ` Vladimir Zapolskiy
2018-10-13 13:47 ` Vladimir Zapolskiy
2018-10-16 12:48 ` Laurent Pinchart
2018-10-30 16:44 ` Luca Ceresoli
2018-10-31 20:31 ` Vladimir Zapolskiy
2018-10-08 21:12 ` [PATCH 4/7] mfd: ds90ux9xx: add TI DS90Ux9xx de-/serializer MFD driver Vladimir Zapolskiy
2018-10-09 4:08 ` kbuild test robot
2018-10-09 11:14 ` Vladimir Zapolskiy
2018-10-12 6:03 ` Lee Jones
2018-10-12 7:41 ` Vladimir Zapolskiy
2018-10-12 7:41 ` Vladimir Zapolskiy
2018-10-12 8:39 ` Lee Jones
2018-10-12 9:20 ` Kieran Bingham
2018-10-12 10:58 ` Vladimir Zapolskiy
2018-10-12 10:58 ` Vladimir Zapolskiy
2018-10-12 11:34 ` Lee Jones
2018-10-12 14:13 ` Vladimir Zapolskiy
2018-10-12 14:25 ` Lee Jones
2018-10-12 11:47 ` Kieran Bingham
2018-10-12 13:01 ` Laurent Pinchart
2018-10-12 13:59 ` Vladimir Zapolskiy
2018-10-16 13:08 ` Laurent Pinchart
2018-10-23 8:16 ` Vladimir Zapolskiy
2018-10-30 16:44 ` Luca Ceresoli
2018-10-13 15:10 ` Vladimir Zapolskiy
2018-10-13 15:10 ` Vladimir Zapolskiy
2018-10-16 13:12 ` Laurent Pinchart
2018-10-16 18:32 ` Vladimir Zapolskiy
2018-10-13 12:33 ` Vladimir Zapolskiy
2018-10-13 12:33 ` Vladimir Zapolskiy
2018-10-12 11:24 ` Vladimir Zapolskiy
2018-10-12 11:24 ` Vladimir Zapolskiy
2018-10-12 11:43 ` Lee Jones
2018-10-12 14:23 ` Vladimir Zapolskiy
2018-10-12 13:07 ` Laurent Pinchart
2018-10-08 21:12 ` [PATCH 5/7] mfd: ds90ux9xx: add I2C bridge/alias and link connection driver Vladimir Zapolskiy
2018-10-12 6:04 ` Lee Jones
2018-10-12 7:32 ` Vladimir Zapolskiy
2018-10-12 7:32 ` Vladimir Zapolskiy
2018-10-12 9:03 ` Lee Jones
2018-10-12 13:12 ` Laurent Pinchart
2018-10-12 13:12 ` Laurent Pinchart
2018-10-12 14:36 ` Vladimir Zapolskiy
2018-10-16 14:06 ` Laurent Pinchart
2018-10-08 21:12 ` [PATCH 6/7] pinctrl: ds90ux9xx: add TI DS90Ux9xx pinmux and GPIO controller driver Vladimir Zapolskiy
2018-10-10 9:04 ` Linus Walleij
2018-10-10 9:04 ` Linus Walleij
2018-10-08 21:12 ` [PATCH 7/7] MAINTAINERS: add entry for TI DS90Ux9xx FPD-Link III drivers Vladimir Zapolskiy
2018-10-12 11:34 ` [PATCH 0/7] mfd/pinctrl: add initial support of TI DS90Ux9xx ICs Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CACRpkdb9Lwshpt+haJur_7ESOD50t=8PE-ct-UO5yJFRfrM6Lw@mail.gmail.com' \
--to=linus.walleij@linaro.org \
--cc=Sandeep_Jain@mentor.com \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=lee.jones@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=marek.vasut@gmail.com \
--cc=robh+dt@kernel.org \
--cc=vladimir_zapolskiy@mentor.com \
--cc=vz@mleia.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.