From: Daniel Mack <zonque@gmail.com>
To: Kristian Amlie <kristian@amlie.name>
Cc: alsa-devel@alsa-project.org
Subject: Re: How to add a new MIDI device to the usbaudio driver
Date: Tue, 23 Aug 2011 10:43:52 +0200 [thread overview]
Message-ID: <CACTFLAP0gMjSShp59Gn1q+aXzPMNGMH05ze_p5S0sEsYwum9JA@mail.gmail.com> (raw)
In-Reply-To: <4E53585D.9050004@amlie.name>
On Tue, Aug 23, 2011 at 9:35 AM, Kristian Amlie <kristian@amlie.name> wrote:
> On 08/22/11 13:49, Daniel Mack wrote:
>> It doesn't seem to be using a standard MIDI interface, but there's a
>> chance that it accepts raw MIDI byte streams. Can you check the patch
>> below?
>
> With that patch, the device shows up, but aseqdump does not report any
> MIDI events after connecting to it.
>
> The Windows drivers are called "USB Serial Converter" and "USB Serial
> Port", so maybe it's all wrapped in a different protocol. Does that name
> ring a bell?
That's possible, and it should be easy to support these type of
devices in ALSA. However, some logic is neccessary to configure the
hardware to its correct baud rate and hardware protocol. The easiest
way to determine the setup sequence is certainly to sniff the Windows
driver communication with some tool like usbsnoop. Can you give that a
try?
Daniel
next prev parent reply other threads:[~2011-08-23 8:43 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-22 10:52 How to add a new MIDI device to the usbaudio driver Kristian Amlie
2011-08-22 10:54 ` Daniel Mack
2011-08-22 11:40 ` Kristian Amlie
2011-08-22 11:49 ` Daniel Mack
2011-08-23 7:35 ` Kristian Amlie
2011-08-23 8:43 ` Daniel Mack [this message]
2011-08-23 9:03 ` Paul Menzel
2011-08-23 9:22 ` Daniel Mack
2011-08-23 9:42 ` Kristian Amlie
2011-08-23 10:02 ` Paul Menzel
2011-08-27 10:38 ` Kristian Amlie
2011-08-23 9:38 ` Clemens Ladisch
2011-08-23 9:42 ` Daniel Mack
2011-08-23 10:07 ` Kristian Amlie
2011-08-23 10:16 ` Daniel Mack
2011-08-23 11:57 ` Kristian Amlie
2011-08-23 12:20 ` Daniel Mack
2011-08-23 13:12 ` Kristian Amlie
2011-08-23 13:16 ` Daniel Mack
2011-08-23 13:28 ` Kristian Amlie
2011-08-23 13:44 ` Daniel Mack
2011-08-24 8:09 ` Kristian Amlie
2011-08-24 8:32 ` Daniel Mack
2011-08-24 10:14 ` Kristian Amlie
2011-08-24 10:29 ` Daniel Mack
2011-08-24 13:14 ` Kristian Amlie
2011-08-24 13:18 ` Daniel Mack
2011-08-24 19:51 ` Clemens Ladisch
2011-08-25 11:28 ` Kristian Amlie
2011-08-25 11:35 ` [PATCH] Added support for Starr Labs USB MIDI devices Kristian Amlie
2011-08-25 12:20 ` Daniel Mack
2011-08-25 13:40 ` Kristian Amlie
2011-08-26 11:24 ` Clemens Ladisch
2011-08-25 12:38 ` How to add a new MIDI device to the usbaudio driver Daniel Mack
2011-08-24 11:44 ` Clemens Ladisch
2011-08-24 12:05 ` Daniel Mack
2011-08-24 13:19 ` Kristian Amlie
2011-08-24 16:01 ` Clemens Ladisch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CACTFLAP0gMjSShp59Gn1q+aXzPMNGMH05ze_p5S0sEsYwum9JA@mail.gmail.com \
--to=zonque@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=kristian@amlie.name \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.