* [LTP] LTP Ipv6_lib failures
@ 2017-06-23 6:25 ankit gupta
2017-06-26 5:28 ` [LTP] Fwd: " ankit gupta
2017-06-26 8:49 ` [LTP] " Petr Vorel
0 siblings, 2 replies; 5+ messages in thread
From: ankit gupta @ 2017-06-23 6:25 UTC (permalink / raw)
To: ltp
Hi All,
I am executing the LTP(20160126) tests for one of my board, and in it
Ipv6_lib is failing. below is the tests results and logs.
Test Start Time: Thu Jun 22 18:22:27 2017
-----------------------------------------
Testcase Result Exit Value
-------- ------ ----------
in6_01 PASS 0
in6_02 FAIL 4
getaddrinfo_01 FAIL 1
asapi_01 FAIL 2
asapi_02 FAIL 2
asapi_03 FAIL 2
-----------------------------------------------
Total Tests: 6
Total Skipped Tests: 0
Total Failures: 5
Kernel Version: 4.1.29-4.1-1.0.x-imx-dms-ba16+g8eaed11
Machine Architecture: armv7l
Hostname: Development-board
In this* getaddrinfo_01* is passing after I make entry of my host name in
/etc/hosts file, but rest 4 tests are still failing. I did not find any
failure reason in LTP bugs list.
Please see the attachment for individual tests execution logs and let me
know if something else is required from my side?
Thanks & Regards,
Ankit Gupta
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linux.it/pipermail/ltp/attachments/20170623/64b4662d/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ipv6_lib_console_logs
Type: application/octet-stream
Size: 11131 bytes
Desc: not available
URL: <http://lists.linux.it/pipermail/ltp/attachments/20170623/64b4662d/attachment.obj>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [LTP] Fwd: LTP Ipv6_lib failures
2017-06-23 6:25 [LTP] LTP Ipv6_lib failures ankit gupta
@ 2017-06-26 5:28 ` ankit gupta
2017-06-26 8:49 ` [LTP] " Petr Vorel
1 sibling, 0 replies; 5+ messages in thread
From: ankit gupta @ 2017-06-26 5:28 UTC (permalink / raw)
To: ltp-list
[-- Attachment #1.1: Type: text/plain, Size: 1144 bytes --]
Hi All,
I am executing the LTP(20160126) tests for one of my board, and in it
Ipv6_lib is failing. below is the tests results and logs.
Test Start Time: Thu Jun 22 18:22:27 2017
-----------------------------------------
Testcase Result Exit Value
-------- ------ ----------
in6_01 PASS 0
in6_02 FAIL 4
getaddrinfo_01 FAIL 1
asapi_01 FAIL 2
asapi_02 FAIL 2
asapi_03 FAIL 2
-----------------------------------------------
Total Tests: 6
Total Skipped Tests: 0
Total Failures: 5
Kernel Version: 4.1.29-4.1-1.0.x-imx-dms-ba16+g8eaed11
Machine Architecture: armv7l
Hostname: Development-board
In this* getaddrinfo_01* is passing after I make entry of my host name in
/etc/hosts file, but rest 4 tests are still failing. I did not find any
failure reason in LTP bugs list.
Please see the attachment for individual tests execution logs and let me
know if something else is required from my side?
Thanks & Regards,
Ankit Gupta
[-- Attachment #1.2: Type: text/html, Size: 1745 bytes --]
[-- Attachment #2: ipv6_lib_console_logs --]
[-- Type: application/octet-stream, Size: 11131 bytes --]
INFO: creating /opt/ltp/results directory
Checking for required user/group ids
'nobody' user id and group found.
'bin' user id and group found.
'daemon' user id and group found.
Users group found.
Sys group found.
Required users/groups exist.
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
/etc/issue:
ELO OS distribution based on Yocto 2.1.1
Linux Development-Board 4.1.29-4.1-1.0.x-imx-dms-ba16+g8eaed11 #1 SMP PREEMPT Wed May 31 17:55:26 IST 2017 armv7l armv7l armv7l GNU/Linux
Gnu C gcc (GCC) 5.3.0
Gnu make 4.1
util-linux linux 2.27.1
mount linux 2.27.1 (libmount 2.27.0: assert, debug)
modutils directory
e2fsprogs 1.43-WIP
Linux C Library > libc.2.23
Dynamic linker (ldd) 2.23
Linux C++ Library 6.0.21
Procps 3.3.11
iproute2 iproute2-ss160111
Kbd 69:
Sh-utils 8.25
Modules Loaded cdc_ether usbnet cdc_acm usbhid usb_storage evbug ci_hdrc_imx ci_hdrc ehci_hcd usbmisc_imx usbcore mxc_dcic usb_common galcore
free reports:
total used free shared buff/cache available
Mem: 2068488 159204 1872520 4284 36764 1884744
Swap: 0 0 0
/proc/cpuinfo
processor : 0
model name : ARMv7 Processor rev 10 (v7l)
BogoMIPS : 7.54
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpd32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
processor : 1
model name : ARMv7 Processor rev 10 (v7l)
BogoMIPS : 7.54
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpd32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : Freescale i.MX6 Quad/DualLite (Device Tree)
Revision : 0000
Serial : 0000000000000000
no big block device was specified on commandline.
Tests which require a big block device are disabled.
You can specify it with option -z
COMMAND: /opt/ltp/bin/ltp-pan -e -S -a 30228 -n 30228 -p -f /tmp/ltp-xBHcJGMj6t/alltests -l /opt/ltp/results/ipv6_lib_logs -C /opt/ltp/output/LTP_RUN_ON-ipv6_lib_logs.failed -T /opt/ltp/output/LTP_RUN_ON-ipv6_lib_logs.tconf
LOG File: /opt/ltp/results/ipv6_lib_logs
FAILED COMMAND File: /opt/ltp/output/LTP_RUN_ON-ipv6_lib_logs.failed
TCONF COMMAND File: /opt/ltp/output/LTP_RUN_ON-ipv6_lib_logs.tconf
Running tests.......
<<<test_start>>>
tag=in6_01 stime=1498240236
cmdline="in6_01"
contacts=""
analysis=exit
<<<test_output>>>
in6_01 0 TINFO : type of in6.s6_addr[0] is uint8_t
in6_01 1 TPASS : sizeof(in6.s6_addr) == 16
in6_01 2 TPASS : all sockaddr_in6 fields present and correct
in6_01 0 TINFO : IN6ADDR_ANY_INIT present
in6_01 0 TINFO : in6addr_any present and correct
in6_01 0 TINFO : IN6ADDR_LOOPBACK_INIT present
in6_01 0 TINFO : in6addr_loopback present and correct
in6_01 0 TINFO : in6addr_loopback in network byte order
in6_01 3 TPASS : global in6 definitions tests succeed
in6_01 0 TINFO : IN6_IS_ADDR_V4MAPPED("2002::1") 0
in6_01 0 TINFO : IN6_IS_ADDR_V4MAPPED("::ffff:10.0.0.1") 1
in6_01 0 TINFO : IN6_IS_ADDR_V4MAPPED("::fffe:10.0.0.1") 0
in6_01 0 TINFO : IN6_IS_ADDR_V4MAPPED("::7fff:10.0.0.1") 0
in6_01 0 TINFO : IN6_IS_ADDR_V4MAPPED("0:0:0:0:0:0:ffff:0a001") 0
in6_01 0 TINFO : IN6_IS_ADDR_V4MAPPED("0:0:1:0:0:0:ffff:0a001") 0
in6_01 4 TPASS : IN6_IS_ADDR_V4MAPPED tests succeed
in6_01 0 TINFO : "2002::1" is AF_INET6
in6_01 0 TINFO : "10.0.0.1" is AF_INET
in6_01 0 TINFO : "::ffff:10.0.0.1" is AF_INET6
in6_01 0 TINFO : "::1" is AF_INET6
in6_01 0 TINFO : "::" is AF_INET6
in6_01 5 TPASS : sockaddr_storage tests succeed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=in6_02 stime=1498240236
cmdline="in6_02"
contacts=""
analysis=exit
<<<test_output>>>
in6_02 0 TINFO : get interface name from LHOST_IFACES var
in6_02 0 TWARN : in6_02.c:264: LHOST_IFACES not defined, default to eth0
in6_02 0 TINFO : if_nametoindex("lo") 1
in6_02 0 TINFO : if_nametoindex("eth0") 2
in6_02 0 TINFO : if_nametoindex("hoser75") 0
in6_02 0 TINFO : if_nametoindex("6") 0
in6_02 1 TPASS : if_nametoindex() tests succeed
in6_02 0 TINFO : if_indextoname(0) returns NULL
in6_02 0 TINFO : if_indextoname(1) returns "lo"
in6_02 0 TINFO : if_indextoname(2) returns "eth0"
in6_02 0 TINFO : if_indextoname(3) returns "sit0"
in6_02 0 TINFO : if_indextoname(4) returns NULL
in6_02 0 TINFO : if_indextoname(5) returns NULL
in6_02 0 TINFO : if_indextoname(6) returns NULL
in6_02 0 TINFO : if_indextoname(7) returns NULL
in6_02 0 TINFO : if_indextoname(8) returns NULL
in6_02 0 TINFO : if_indextoname(9) returns NULL
in6_02 0 TINFO : if_indextoname(1804289383) returns NULL
in6_02 0 TINFO : if_indextoname(846930886) returns NULL
in6_02 0 TINFO : if_indextoname(1681692777) returns NULL
in6_02 0 TINFO : if_indextoname(1714636915) returns NULL
in6_02 0 TINFO : if_indextoname(1957747793) returns NULL
in6_02 0 TINFO : if_indextoname(424238335) returns NULL
in6_02 0 TINFO : if_indextoname(719885386) returns NULL
in6_02 0 TINFO : if_indextoname(1649760492) returns NULL
in6_02 0 TINFO : if_indextoname(596516649) returns NULL
in6_02 0 TINFO : if_indextoname(1189641421) returns NULL
in6_02 2 TPASS : if_indextoname() tests succeed
in6_02 0 TINFO : if_nameindex idx 1 name "lo"
in6_02 0 TINFO : if_nameindex idx 2 name "eth0"
in6_02 0 TINFO : if_nameindex idx 3 name "sit0"
in6_02 0 TINFO : if_freenameindex passed 4096 iterations
in6_02 3 TPASS : if_nameindex() tests succeed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=4 corefile=no
cutime=3 cstime=36
<<<test_end>>>
<<<test_start>>>
tag=getaddrinfo_01 stime=1498240236
cmdline="getaddrinfo_01"
contacts=""
analysis=exit
<<<test_output>>>
getaddrinfo_01 1 TPASS : getaddrinfo IPv4 basic lookup
getaddrinfo_01 2 TPASS : getaddrinfo IPv4 canonical name
getaddrinfo_01 3 TPASS : getaddrinfo IPv4 host+service
getaddrinfo_01 4 TPASS : getaddrinfo IPv4 host+service PASSIVE
getaddrinfo_01 5 TPASS : getaddrinfo IPv4 AI_NUMERICHOST w/ hostname
getaddrinfo_01 6 TPASS : getaddrinfo IPv4 0+service, PASSIVE
getaddrinfo_01 7 TPASS : getaddrinfo IPv4 0+service
getaddrinfo_01 8 TPASS : getaddrinfo IPv4 host+service, AI_NUMERICSERV
getaddrinfo_01 9 TPASS : getaddrinfo IPv4 SOCK_STREAM/IPPROTO_UDP hints
getaddrinfo_01 10 TPASS : getaddrinfo IPv4 socktype 0,513
getaddrinfo_01 11 TPASS : getaddrinfo IPv4 AI_V4MAPPED
getaddrinfo_01 12 TPASS : getaddrinfo IPv6 basic lookup
getaddrinfo_01 13 TPASS : getaddrinfo IPv6 canonical name
getaddrinfo_01 14 TPASS : getaddrinfo IPv6 host+service
getaddrinfo_01 15 TPASS : getaddrinfo IPv6 host+service PASSIVE
getaddrinfo_01 16 TPASS : getaddrinfo IPv6 AI_NUMERICHOST w/ hostname
getaddrinfo_01 17 TPASS : getaddrinfo IPv6 0+service, PASSIVE
getaddrinfo_01 18 TPASS : getaddrinfo IPv6 0+service
getaddrinfo_01 19 TPASS : getaddrinfo IPv6 host+service, AI_NUMERICSERV
getaddrinfo_01 20 TPASS : getaddrinfo IPv6 SOCK_STREAM/IPPROTO_UDP hints
getaddrinfo_01 21 TPASS : getaddrinfo IPv6 socktype 0,513
getaddrinfo_01 22 TPASS : getaddrinfo IPv6 AI_V4MAPPED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=asapi_01 stime=1498240236
cmdline="asapi_01"
contacts=""
analysis=exit
<<<test_output>>>
asapi_04 1 TPASS : IN6_ARE_ADDR_EQUAL
asapi_04 2 TPASS : "hopopt" protocols entry
asapi_04 3 TPASS : "ipv6" protocols entry
asapi_04 4 TPASS : "ipv6-route" protocols entry
asapi_04 5 TPASS : "ipv6-frag" protocols entry
asapi_04 6 TPASS : "esp" protocols entry
asapi_04 7 TPASS : "ah" protocols entry
asapi_04 8 TPASS : "ipv6-icmp" protocols entry
asapi_04 9 TPASS : "ipv6-nonxt" protocols entry
asapi_04 10 TPASS : "ipv6-opts" protocols entry
asapi_04 11 TBROK : safe_net.c:162: asapi_01.c:369: connect(7, 127.0.0.1:49266, 16) failed: errno=ENETUNREACH(101): Network is unreachable
asapi_04 12 TBROK : safe_net.c:162: Remaining cases broken
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=2 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=asapi_02 stime=1498240236
cmdline="asapi_02"
contacts=""
analysis=exit
<<<test_output>>>
asapi_05 1 TBROK : asapi_02.c:110: ICMP6_FILTER_SETPASS s 20 f 20: sendto failed: errno=EADDRNOTAVAIL(99): Cannot assign requested address
asapi_05 2 TBROK : asapi_02.c:110: ICMP6_FILTER_SETPASS s 20 f 21: sendto failed: errno=EADDRNOTAVAIL(99): Cannot assign requested address
asapi_05 3 TBROK : asapi_02.c:110: ICMP6_FILTER_SETBLOCK s 20 f 20: sendto failed: errno=EADDRNOTAVAIL(99): Cannot assign requested address
asapi_05 4 TBROK : asapi_02.c:110: ICMP6_FILTER_SETBLOCK s 20 f 21: sendto failed: errno=EADDRNOTAVAIL(99): Cannot assign requested address
asapi_05 5 TBROK : asapi_02.c:110: ICMP6_FILTER_PASSALL s 20: sendto failed: errno=EADDRNOTAVAIL(99): Cannot assign requested address
asapi_05 6 TBROK : asapi_02.c:110: ICMP6_FILTER_PASSALL s 20: sendto failed: errno=EADDRNOTAVAIL(99): Cannot assign requested address
asapi_05 7 TBROK : asapi_02.c:110: ICMP6_FILTER_BLOCKALL s 20: sendto failed: errno=EADDRNOTAVAIL(99): Cannot assign requested address
asapi_05 8 TBROK : asapi_02.c:110: ICMP6_FILTER_BLOCKALL s 20: sendto failed: errno=EADDRNOTAVAIL(99): Cannot assign requested address
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=2 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=asapi_03 stime=1498240236
cmdline="asapi_03"
contacts=""
analysis=exit
<<<test_output>>>
asapi_06 1 TBROK : safe_net.c:116: asapi_03.c:261: bind(6, ::1, 28) failed: errno=EADDRNOTAVAIL(99): Cannot assign requested address
asapi_06 2 TBROK : safe_net.c:116: Remaining cases broken
incrementing stop
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=2 corefile=no
cutime=0 cstime=0
<<<test_end>>>
INFO: ltp-pan reported some tests FAIL
LTP Version: 20160126
###############################################################
Done executing testcases.
LTP Version: 20160126
###############################################################
[-- Attachment #3: Type: text/plain, Size: 202 bytes --]
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
[-- Attachment #4: Type: text/plain, Size: 155 bytes --]
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list
^ permalink raw reply [flat|nested] 5+ messages in thread
* [LTP] LTP Ipv6_lib failures
2017-06-23 6:25 [LTP] LTP Ipv6_lib failures ankit gupta
2017-06-26 5:28 ` [LTP] Fwd: " ankit gupta
@ 2017-06-26 8:49 ` Petr Vorel
2017-06-26 8:57 ` ankit gupta
1 sibling, 1 reply; 5+ messages in thread
From: Petr Vorel @ 2017-06-26 8:49 UTC (permalink / raw)
To: ltp
Hi Ankit,
> Hi All,
> I am executing the LTP(20160126) tests for one of my board, and in it
> Ipv6_lib is failing. below is the tests results and logs.
> Test Start Time: Thu Jun 22 18:22:27 2017
> -----------------------------------------
> Testcase Result Exit Value
> -------- ------ ----------
> in6_01 PASS 0
> in6_02 FAIL 4
> getaddrinfo_01 FAIL 1
> asapi_01 FAIL 2
> asapi_02 FAIL 2
> asapi_03 FAIL 2
> -----------------------------------------------
> Total Tests: 6
> Total Skipped Tests: 0
> Total Failures: 5
> Kernel Version: 4.1.29-4.1-1.0.x-imx-dms-ba16+g8eaed11
> Machine Architecture: armv7l
> Hostname: Development-board
> In this* getaddrinfo_01* is passing after I make entry of my host name in
> /etc/hosts file, but rest 4 tests are still failing. I did not find any
> failure reason in LTP bugs list.
> Please see the attachment for individual tests execution logs and let me
> know if something else is required from my side?
> Thanks & Regards,
> Ankit Gupta
Could you try it with latest release 20170516 and (optionally) with current master?
Do you use buildroot, yocto, something else or compile manually?
Kind regards,
Petr
^ permalink raw reply [flat|nested] 5+ messages in thread
* [LTP] LTP Ipv6_lib failures
2017-06-26 8:49 ` [LTP] " Petr Vorel
@ 2017-06-26 8:57 ` ankit gupta
2017-06-26 10:46 ` Petr Vorel
0 siblings, 1 reply; 5+ messages in thread
From: ankit gupta @ 2017-06-26 8:57 UTC (permalink / raw)
To: ltp
Hi Petr,
I couldn't try it with latest version.
I used Yocto poky Distro version 1.8.1 to build my image.
Is there some issue with LTP(20160126) version for ipv6_lib testsuite?
Thanks & Regards,
Ankit
On Mon, Jun 26, 2017 at 2:19 PM, Petr Vorel <pvorel@suse.cz> wrote:
> Hi Ankit,
>
> > Hi All,
>
> > I am executing the LTP(20160126) tests for one of my board, and in it
> > Ipv6_lib is failing. below is the tests results and logs.
>
> > Test Start Time: Thu Jun 22 18:22:27 2017
> > -----------------------------------------
> > Testcase Result Exit Value
> > -------- ------ ----------
> > in6_01 PASS 0
> > in6_02 FAIL 4
> > getaddrinfo_01 FAIL 1
> > asapi_01 FAIL 2
> > asapi_02 FAIL 2
> > asapi_03 FAIL 2
>
> > -----------------------------------------------
> > Total Tests: 6
> > Total Skipped Tests: 0
> > Total Failures: 5
> > Kernel Version: 4.1.29-4.1-1.0.x-imx-dms-ba16+g8eaed11
> > Machine Architecture: armv7l
> > Hostname: Development-board
>
>
> > In this* getaddrinfo_01* is passing after I make entry of my host name in
> > /etc/hosts file, but rest 4 tests are still failing. I did not find any
> > failure reason in LTP bugs list.
>
> > Please see the attachment for individual tests execution logs and let me
> > know if something else is required from my side?
>
> > Thanks & Regards,
> > Ankit Gupta
>
> Could you try it with latest release 20170516 and (optionally) with
> current master?
> Do you use buildroot, yocto, something else or compile manually?
>
>
> Kind regards,
> Petr
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linux.it/pipermail/ltp/attachments/20170626/6ea838e7/attachment.html>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [LTP] LTP Ipv6_lib failures
2017-06-26 8:57 ` ankit gupta
@ 2017-06-26 10:46 ` Petr Vorel
0 siblings, 0 replies; 5+ messages in thread
From: Petr Vorel @ 2017-06-26 10:46 UTC (permalink / raw)
To: ltp
Hi Ankit,
> Hi Petr,
> I couldn't try it with latest version.
> I used Yocto poky Distro version 1.8.1 to build my image.
> Is there some issue with LTP(20160126) version for ipv6_lib testsuite?
> Thanks & Regards,
> Ankit
Your log shows:
asapi_04 11 TBROK : safe_net.c:162: asapi_01.c:369: connect(7, 127.0.0.1:49266, 16) failed: errno=ENETUNREACH(101): Network is unreachable
Do you have correct settings? These commands should reveal it:
ping -c 2 $IPV4_NETWORK.$LHOST_IPV4_HOST
ping -c 2 $IPV4_NETWORK.$RHOST_IPV4_HOST
ping6 -c 2 $IPV6_NETWORK:$LHOST_IPV6_HOST
ping6 -c 2 $IPV6_NETWORK:$RHOST_IPV6_HOST
If ping works,could you please post the command you use for running tests? I'd also appreciate to know
environment variables (run: env) and kernel configuration (run: sysctl -a). This also
helps me to indicate whether you use RSH, SSH or network namespaces for testing.
For networking tests it's preferred to run $LTPROOT/testscripts/network.sh
There is some network related doc:
https://github.com/linux-test-project/ltp/tree/master/testcases/network#ltp-network-tests
https://github.com/linux-test-project/ltp/blob/master/INSTALL
https://github.com/linux-test-project/ltp/blob/master/doc/namespaces-helper-tools.txt
What a shame you cannot use poky Pyro 2.3, or compile newest LTP release.
Although source code in testcases/network/lib6/ haven't changed (except some minor
cleanup), there have been other fixes in LTP tree which may affect the test.
BTW Poky 1.8.1 is tagged as released in 2015-11-06 [1], but upgrade to 20160126 was done in
2016-02-12 [2]. Aren't you using version 1.8.2? (released 2016-05-27 [3])
[1] http://git.yoctoproject.org/cgit/cgit.cgi/poky/tag/?id=yocto-1.8.1
[2] http://git.yoctoproject.org/cgit/cgit.cgi/poky/commit/?id=b5b8003a0b99fb591f2e2a0a5ed74e60a120dc87
[3] http://git.yoctoproject.org/cgit/cgit.cgi/poky/tag/?id=yocto-1.8.2
Kind regards,
Petr
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2017-06-26 10:46 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-06-23 6:25 [LTP] LTP Ipv6_lib failures ankit gupta
2017-06-26 5:28 ` [LTP] Fwd: " ankit gupta
2017-06-26 8:49 ` [LTP] " Petr Vorel
2017-06-26 8:57 ` ankit gupta
2017-06-26 10:46 ` Petr Vorel
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.