* b43 bcm43228 and linux 3.18.3
@ 2015-01-17 17:59 Vasiliy Tolstov
2015-01-19 12:20 ` Vasiliy Tolstov
0 siblings, 1 reply; 12+ messages in thread
From: Vasiliy Tolstov @ 2015-01-17 17:59 UTC (permalink / raw)
To: linux-wireless
Hi all. I have 3.18.3 kernel and bcm43228, firstly all works fine, but
after connection with my zyxel router i can't ping it ip (after 1-2
min). Connection worked fin, but nothing transmitted =(.
I'm try to disable qos, but this not helps, i'm try to enable
verbose=3, but in dmesg nothing interesting. Time after time b43
driver moved from 5Ghz to 2.4Ghz to 5Ghz and so.
How can i debug this issue? I'm realy love free opensource drivers.
Thanks
--
Vasiliy Tolstov,
e-mail: v.tolstov@selfip.ru
jabber: vase@selfip.ru
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: b43 bcm43228 and linux 3.18.3
2015-01-17 17:59 b43 bcm43228 and linux 3.18.3 Vasiliy Tolstov
@ 2015-01-19 12:20 ` Vasiliy Tolstov
2015-01-19 15:45 ` Arend van Spriel
0 siblings, 1 reply; 12+ messages in thread
From: Vasiliy Tolstov @ 2015-01-19 12:20 UTC (permalink / raw)
To: Vasiliy Tolstov; +Cc: linux-wireless
Anybody can helps me debug this?
2015-01-17 20:59 GMT+03:00 Vasiliy Tolstov <v.tolstov@selfip.ru>:
> Hi all. I have 3.18.3 kernel and bcm43228, firstly all works fine, but
> after connection with my zyxel router i can't ping it ip (after 1-2
> min). Connection worked fin, but nothing transmitted =(.
> I'm try to disable qos, but this not helps, i'm try to enable
> verbose=3, but in dmesg nothing interesting. Time after time b43
> driver moved from 5Ghz to 2.4Ghz to 5Ghz and so.
> How can i debug this issue? I'm realy love free opensource drivers.
> Thanks
>
> --
> Vasiliy Tolstov,
> e-mail: v.tolstov@selfip.ru
> jabber: vase@selfip.ru
--
Vasiliy Tolstov,
e-mail: v.tolstov@selfip.ru
jabber: vase@selfip.ru
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: b43 bcm43228 and linux 3.18.3
2015-01-19 12:20 ` Vasiliy Tolstov
@ 2015-01-19 15:45 ` Arend van Spriel
0 siblings, 0 replies; 12+ messages in thread
From: Arend van Spriel @ 2015-01-19 15:45 UTC (permalink / raw)
To: Vasiliy Tolstov; +Cc: linux-wireless, b43-dev
+ b43-dev@lists.infradead.org
On 01/19/15 13:20, Vasiliy Tolstov wrote:
> Anybody can helps me debug this?
>
> 2015-01-17 20:59 GMT+03:00 Vasiliy Tolstov<v.tolstov@selfip.ru>:
>> Hi all. I have 3.18.3 kernel and bcm43228, firstly all works fine, but
>> after connection with my zyxel router i can't ping it ip (after 1-2
>> min). Connection worked fin, but nothing transmitted =(.
>> I'm try to disable qos, but this not helps, i'm try to enable
>> verbose=3, but in dmesg nothing interesting. Time after time b43
>> driver moved from 5Ghz to 2.4Ghz to 5Ghz and so.
What do you mean by "moved from 5Ghz to 2.4Ghz..". You mean it is
roaming between the two bands? Anyway, there is a b43 specific mailing
list which I added.
Regards,
Arend
>> How can i debug this issue? I'm realy love free opensource drivers.
>> Thanks
>>
>> --
>> Vasiliy Tolstov,
>> e-mail: v.tolstov@selfip.ru
>> jabber: vase@selfip.ru
>
>
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* b43 bcm43228 and linux 3.18.3
@ 2015-01-19 15:45 ` Arend van Spriel
0 siblings, 0 replies; 12+ messages in thread
From: Arend van Spriel @ 2015-01-19 15:45 UTC (permalink / raw)
To: Vasiliy Tolstov; +Cc: linux-wireless, b43-dev
+ b43-dev at lists.infradead.org
On 01/19/15 13:20, Vasiliy Tolstov wrote:
> Anybody can helps me debug this?
>
> 2015-01-17 20:59 GMT+03:00 Vasiliy Tolstov<v.tolstov@selfip.ru>:
>> Hi all. I have 3.18.3 kernel and bcm43228, firstly all works fine, but
>> after connection with my zyxel router i can't ping it ip (after 1-2
>> min). Connection worked fin, but nothing transmitted =(.
>> I'm try to disable qos, but this not helps, i'm try to enable
>> verbose=3, but in dmesg nothing interesting. Time after time b43
>> driver moved from 5Ghz to 2.4Ghz to 5Ghz and so.
What do you mean by "moved from 5Ghz to 2.4Ghz..". You mean it is
roaming between the two bands? Anyway, there is a b43 specific mailing
list which I added.
Regards,
Arend
>> How can i debug this issue? I'm realy love free opensource drivers.
>> Thanks
>>
>> --
>> Vasiliy Tolstov,
>> e-mail: v.tolstov at selfip.ru
>> jabber: vase at selfip.ru
>
>
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: b43 bcm43228 and linux 3.18.3
2015-01-19 15:45 ` Arend van Spriel
@ 2015-01-20 10:24 ` Vasiliy Tolstov
-1 siblings, 0 replies; 12+ messages in thread
From: Vasiliy Tolstov @ 2015-01-20 10:24 UTC (permalink / raw)
To: Arend van Spriel; +Cc: linux-wireless, b43-dev
2015-01-19 18:45 GMT+03:00 Arend van Spriel <arend@broadcom.com>:
> What do you mean by "moved from 5Ghz to 2.4Ghz..". You mean it is roaming
> between the two bands?
Yes, i have zyxel keenetic start that supports b/g/n
> Anyway, there is a b43 specific mailing list which I
> added.
Thanks. I don't know about this list.
--
Vasiliy Tolstov,
e-mail: v.tolstov@selfip.ru
jabber: vase@selfip.ru
^ permalink raw reply [flat|nested] 12+ messages in thread
* b43 bcm43228 and linux 3.18.3
@ 2015-01-20 10:24 ` Vasiliy Tolstov
0 siblings, 0 replies; 12+ messages in thread
From: Vasiliy Tolstov @ 2015-01-20 10:24 UTC (permalink / raw)
To: Arend van Spriel; +Cc: linux-wireless, b43-dev
2015-01-19 18:45 GMT+03:00 Arend van Spriel <arend@broadcom.com>:
> What do you mean by "moved from 5Ghz to 2.4Ghz..". You mean it is roaming
> between the two bands?
Yes, i have zyxel keenetic start that supports b/g/n
> Anyway, there is a b43 specific mailing list which I
> added.
Thanks. I don't know about this list.
--
Vasiliy Tolstov,
e-mail: v.tolstov at selfip.ru
jabber: vase at selfip.ru
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: b43 bcm43228 and linux 3.18.3
2015-01-20 10:24 ` Vasiliy Tolstov
@ 2015-01-20 10:31 ` Arend van Spriel
-1 siblings, 0 replies; 12+ messages in thread
From: Arend van Spriel @ 2015-01-20 10:31 UTC (permalink / raw)
To: Vasiliy Tolstov; +Cc: linux-wireless, b43-dev
On 01/20/15 11:24, Vasiliy Tolstov wrote:
> 2015-01-19 18:45 GMT+03:00 Arend van Spriel<arend@broadcom.com>:
>> What do you mean by "moved from 5Ghz to 2.4Ghz..". You mean it is roaming
>> between the two bands?
>
> Yes, i have zyxel keenetic start that supports b/g/n
'b/g' is in 2.4G band. 'n' is in both 2.4G and 5G band. Assume it can do
'a' as well. Anyway, does that router let you specify the SSID for both
2.4G and 5G. Are you using same SSID for both?
Regards,
Arend
>> Anyway, there is a b43 specific mailing list which I
>> added.
>
>
> Thanks. I don't know about this list.
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* b43 bcm43228 and linux 3.18.3
@ 2015-01-20 10:31 ` Arend van Spriel
0 siblings, 0 replies; 12+ messages in thread
From: Arend van Spriel @ 2015-01-20 10:31 UTC (permalink / raw)
To: Vasiliy Tolstov; +Cc: linux-wireless, b43-dev
On 01/20/15 11:24, Vasiliy Tolstov wrote:
> 2015-01-19 18:45 GMT+03:00 Arend van Spriel<arend@broadcom.com>:
>> What do you mean by "moved from 5Ghz to 2.4Ghz..". You mean it is roaming
>> between the two bands?
>
> Yes, i have zyxel keenetic start that supports b/g/n
'b/g' is in 2.4G band. 'n' is in both 2.4G and 5G band. Assume it can do
'a' as well. Anyway, does that router let you specify the SSID for both
2.4G and 5G. Are you using same SSID for both?
Regards,
Arend
>> Anyway, there is a b43 specific mailing list which I
>> added.
>
>
> Thanks. I don't know about this list.
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: b43 bcm43228 and linux 3.18.3
2015-01-20 10:31 ` Arend van Spriel
@ 2015-01-20 10:48 ` Vasiliy Tolstov
-1 siblings, 0 replies; 12+ messages in thread
From: Vasiliy Tolstov @ 2015-01-20 10:48 UTC (permalink / raw)
To: Arend van Spriel; +Cc: linux-wireless, b43-dev
2015-01-20 13:31 GMT+03:00 Arend van Spriel <arend@broadcom.com>:
> 'b/g' is in 2.4G band. 'n' is in both 2.4G and 5G band. Assume it can do 'a'
> as well. Anyway, does that router let you specify the SSID for both 2.4G and
> 5G. Are you using same SSID for both?
As i see i can't specify different SSID for 2.4G and 5G (only one ssid
available). Does it possible to not roam between bands in b43 driver?
--
Vasiliy Tolstov,
e-mail: v.tolstov@selfip.ru
jabber: vase@selfip.ru
^ permalink raw reply [flat|nested] 12+ messages in thread
* b43 bcm43228 and linux 3.18.3
@ 2015-01-20 10:48 ` Vasiliy Tolstov
0 siblings, 0 replies; 12+ messages in thread
From: Vasiliy Tolstov @ 2015-01-20 10:48 UTC (permalink / raw)
To: Arend van Spriel; +Cc: linux-wireless, b43-dev
2015-01-20 13:31 GMT+03:00 Arend van Spriel <arend@broadcom.com>:
> 'b/g' is in 2.4G band. 'n' is in both 2.4G and 5G band. Assume it can do 'a'
> as well. Anyway, does that router let you specify the SSID for both 2.4G and
> 5G. Are you using same SSID for both?
As i see i can't specify different SSID for 2.4G and 5G (only one ssid
available). Does it possible to not roam between bands in b43 driver?
--
Vasiliy Tolstov,
e-mail: v.tolstov at selfip.ru
jabber: vase at selfip.ru
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: b43 bcm43228 and linux 3.18.3
2015-01-20 10:48 ` Vasiliy Tolstov
@ 2015-02-22 21:31 ` Vasiliy Tolstov
-1 siblings, 0 replies; 12+ messages in thread
From: Vasiliy Tolstov @ 2015-02-22 21:31 UTC (permalink / raw)
To: Vasiliy Tolstov; +Cc: Arend van Spriel, linux-wireless, b43-dev
I'm switch to 3.19 kernel, now debug info contains:
[ 286.557369] b43-phy0 ERROR: PHY transmission error
[ 286.557551] b43-phy0 ERROR: PHY transmission error
[ 290.412335] b43-phy0 ERROR: PHY transmission error
[ 303.809876] b43-phy0 debug: Switching to 5 GHz band
[ 303.957855] b43-phy0 debug: Switching to 2.4 GHz band
[ 304.296705] b43-phy0 debug: Switching to 5 GHz band
[ 304.444641] b43-phy0 debug: Switching to 2.4 GHz band
[ 304.784427] b43-phy0 debug: Switching to 5 GHz band
[ 304.932492] b43-phy0 debug: Switching to 2.4 GHz band
[ 305.273372] b43-phy0 debug: Switching to 5 GHz band
[ 305.424327] b43-phy0 debug: Switching to 2.4 GHz band
and i have sometimes stuck in tcp/udp transmissions.
2015-01-20 13:48 GMT+03:00 Vasiliy Tolstov <v.tolstov@selfip.ru>:
> 2015-01-20 13:31 GMT+03:00 Arend van Spriel <arend@broadcom.com>:
>> 'b/g' is in 2.4G band. 'n' is in both 2.4G and 5G band. Assume it can do 'a'
>> as well. Anyway, does that router let you specify the SSID for both 2.4G and
>> 5G. Are you using same SSID for both?
>
>
> As i see i can't specify different SSID for 2.4G and 5G (only one ssid
> available). Does it possible to not roam between bands in b43 driver?
>
> --
> Vasiliy Tolstov,
> e-mail: v.tolstov@selfip.ru
> jabber: vase@selfip.ru
--
Vasiliy Tolstov,
e-mail: v.tolstov@selfip.ru
jabber: vase@selfip.ru
^ permalink raw reply [flat|nested] 12+ messages in thread
* b43 bcm43228 and linux 3.18.3
@ 2015-02-22 21:31 ` Vasiliy Tolstov
0 siblings, 0 replies; 12+ messages in thread
From: Vasiliy Tolstov @ 2015-02-22 21:31 UTC (permalink / raw)
To: Vasiliy Tolstov; +Cc: Arend van Spriel, linux-wireless, b43-dev
I'm switch to 3.19 kernel, now debug info contains:
[ 286.557369] b43-phy0 ERROR: PHY transmission error
[ 286.557551] b43-phy0 ERROR: PHY transmission error
[ 290.412335] b43-phy0 ERROR: PHY transmission error
[ 303.809876] b43-phy0 debug: Switching to 5 GHz band
[ 303.957855] b43-phy0 debug: Switching to 2.4 GHz band
[ 304.296705] b43-phy0 debug: Switching to 5 GHz band
[ 304.444641] b43-phy0 debug: Switching to 2.4 GHz band
[ 304.784427] b43-phy0 debug: Switching to 5 GHz band
[ 304.932492] b43-phy0 debug: Switching to 2.4 GHz band
[ 305.273372] b43-phy0 debug: Switching to 5 GHz band
[ 305.424327] b43-phy0 debug: Switching to 2.4 GHz band
and i have sometimes stuck in tcp/udp transmissions.
2015-01-20 13:48 GMT+03:00 Vasiliy Tolstov <v.tolstov@selfip.ru>:
> 2015-01-20 13:31 GMT+03:00 Arend van Spriel <arend@broadcom.com>:
>> 'b/g' is in 2.4G band. 'n' is in both 2.4G and 5G band. Assume it can do 'a'
>> as well. Anyway, does that router let you specify the SSID for both 2.4G and
>> 5G. Are you using same SSID for both?
>
>
> As i see i can't specify different SSID for 2.4G and 5G (only one ssid
> available). Does it possible to not roam between bands in b43 driver?
>
> --
> Vasiliy Tolstov,
> e-mail: v.tolstov at selfip.ru
> jabber: vase at selfip.ru
--
Vasiliy Tolstov,
e-mail: v.tolstov at selfip.ru
jabber: vase at selfip.ru
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2015-02-22 21:31 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-01-17 17:59 b43 bcm43228 and linux 3.18.3 Vasiliy Tolstov
2015-01-19 12:20 ` Vasiliy Tolstov
2015-01-19 15:45 ` Arend van Spriel
2015-01-19 15:45 ` Arend van Spriel
2015-01-20 10:24 ` Vasiliy Tolstov
2015-01-20 10:24 ` Vasiliy Tolstov
2015-01-20 10:31 ` Arend van Spriel
2015-01-20 10:31 ` Arend van Spriel
2015-01-20 10:48 ` Vasiliy Tolstov
2015-01-20 10:48 ` Vasiliy Tolstov
2015-02-22 21:31 ` Vasiliy Tolstov
2015-02-22 21:31 ` Vasiliy Tolstov
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.