* [PATCH] ARM: BCM5301X: Fix NAND ECC parameters for Linksys Panamera
@ 2018-03-10 17:12 ` Vivek Unune
0 siblings, 0 replies; 22+ messages in thread
From: Vivek Unune @ 2018-03-10 17:12 UTC (permalink / raw)
To: florian.fainelli, hauke, zajec5, jonmason,
bcm-kernel-feedback-list, robh+dt, mark.rutland, linux
Cc: linux-arm-kernel, devicetree, linux-kernel, Vivek Unune
Using BCH8 gives ecc errors and makes the router unsuable.
Switching to BCH1 fixes these errors.
Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
---
arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
index b6750f70dffb..ea1b3f5eff29 100644
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -7,7 +7,7 @@
/dts-v1/;
#include "bcm47094.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include "bcm5301x-nand-cs0-bch1.dtsi"
/ {
compatible = "linksys,panamera", "brcm,bcm47094", "brcm,bcm4708";
--
2.11.0
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH] ARM: BCM5301X: Fix NAND ECC parameters for Linksys Panamera
@ 2018-03-10 17:12 ` Vivek Unune
0 siblings, 0 replies; 22+ messages in thread
From: Vivek Unune @ 2018-03-10 17:12 UTC (permalink / raw)
To: linux-arm-kernel
Using BCH8 gives ecc errors and makes the router unsuable.
Switching to BCH1 fixes these errors.
Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
---
arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
index b6750f70dffb..ea1b3f5eff29 100644
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -7,7 +7,7 @@
/dts-v1/;
#include "bcm47094.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include "bcm5301x-nand-cs0-bch1.dtsi"
/ {
compatible = "linksys,panamera", "brcm,bcm47094", "brcm,bcm4708";
--
2.11.0
^ permalink raw reply related [flat|nested] 22+ messages in thread
* Re: [PATCH] ARM: BCM5301X: Fix NAND ECC parameters for Linksys Panamera
2018-03-10 17:12 ` Vivek Unune
@ 2018-03-10 21:41 ` Rafał Miłecki
-1 siblings, 0 replies; 22+ messages in thread
From: Rafał Miłecki @ 2018-03-10 21:41 UTC (permalink / raw)
To: Vivek Unune
Cc: florian.fainelli, Hauke Mehrtens, Jon Mason,
bcm-kernel-feedback-list, Rob Herring, Mark Rutland,
Russell King, linux-arm-kernel, devicetree,
Linux Kernel Mailing List
On 10 March 2018 at 18:12, Vivek Unune <npcomplete13@gmail.com> wrote:
> Using BCH8 gives ecc errors and makes the router unsuable.
> Switching to BCH1 fixes these errors.
Can you provide CFE's log messages starting with
"Decompressing...done" and up to the "Press Ctrl+C to stop in CFE"
please? I'd like to see what NAND info CFE prints there.
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH] ARM: BCM5301X: Fix NAND ECC parameters for Linksys Panamera
@ 2018-03-10 21:41 ` Rafał Miłecki
0 siblings, 0 replies; 22+ messages in thread
From: Rafał Miłecki @ 2018-03-10 21:41 UTC (permalink / raw)
To: linux-arm-kernel
On 10 March 2018 at 18:12, Vivek Unune <npcomplete13@gmail.com> wrote:
> Using BCH8 gives ecc errors and makes the router unsuable.
> Switching to BCH1 fixes these errors.
Can you provide CFE's log messages starting with
"Decompressing...done" and up to the "Press Ctrl+C to stop in CFE"
please? I'd like to see what NAND info CFE prints there.
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] ARM: BCM5301X: Fix NAND ECC parameters for Linksys Panamera
2018-03-10 21:41 ` Rafał Miłecki
@ 2018-03-11 10:03 ` Vivek Unune
-1 siblings, 0 replies; 22+ messages in thread
From: Vivek Unune @ 2018-03-11 10:03 UTC (permalink / raw)
To: Rafał Miłecki
Cc: florian.fainelli, Hauke Mehrtens, Jon Mason,
bcm-kernel-feedback-list, Rob Herring, Mark Rutland,
Russell King, linux-arm-kernel, devicetree,
Linux Kernel Mailing List
Hi Rafał,
On Sat, Mar 10, 2018 at 10:41:04PM +0100, Rafał Miłecki wrote:
> On 10 March 2018 at 18:12, Vivek Unune <npcomplete13@gmail.com> wrote:
> > Using BCH8 gives ecc errors and makes the router unsuable.
> > Switching to BCH1 fixes these errors.
>
> Can you provide CFE's log messages starting with
> "Decompressing...done" and up to the "Press Ctrl+C to stop in CFE"
> please? I'd like to see what NAND info CFE prints there.
See below. It does say BCH-8, however I can't get it to work.
CFE log:
Decompressing...done
Found a Toshiba NAND flash:
Total size: 128MB
Block size: 128KB
Page Size: 2048B
OOB Size: 64B
Sector size: 512B
Spare size: 16B
ECC level: 8 (8-bit)
Device ID: 0x98 0xf1 0x80 0x15 0xf2 0x16
find_devinfo: devinfo block found at 0x00180000!
Press Ctrl+C to stop in CFE
Thanks,
Vivek
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH] ARM: BCM5301X: Fix NAND ECC parameters for Linksys Panamera
@ 2018-03-11 10:03 ` Vivek Unune
0 siblings, 0 replies; 22+ messages in thread
From: Vivek Unune @ 2018-03-11 10:03 UTC (permalink / raw)
To: linux-arm-kernel
Hi Rafa?,
On Sat, Mar 10, 2018 at 10:41:04PM +0100, Rafa? Mi?ecki wrote:
> On 10 March 2018 at 18:12, Vivek Unune <npcomplete13@gmail.com> wrote:
> > Using BCH8 gives ecc errors and makes the router unsuable.
> > Switching to BCH1 fixes these errors.
>
> Can you provide CFE's log messages starting with
> "Decompressing...done" and up to the "Press Ctrl+C to stop in CFE"
> please? I'd like to see what NAND info CFE prints there.
See below. It does say BCH-8, however I can't get it to work.
CFE log:
Decompressing...done
Found a Toshiba NAND flash:
Total size: 128MB
Block size: 128KB
Page Size: 2048B
OOB Size: 64B
Sector size: 512B
Spare size: 16B
ECC level: 8 (8-bit)
Device ID: 0x98 0xf1 0x80 0x15 0xf2 0x16
find_devinfo: devinfo block found at 0x00180000!
Press Ctrl+C to stop in CFE
Thanks,
Vivek
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] ARM: BCM5301X: Fix NAND ECC parameters for Linksys Panamera
2018-03-11 10:03 ` Vivek Unune
@ 2018-03-12 22:52 ` Florian Fainelli
-1 siblings, 0 replies; 22+ messages in thread
From: Florian Fainelli @ 2018-03-12 22:52 UTC (permalink / raw)
To: Vivek Unune, Rafał Miłecki
Cc: Hauke Mehrtens, Jon Mason, bcm-kernel-feedback-list, Rob Herring,
Mark Rutland, Russell King, linux-arm-kernel, devicetree,
Linux Kernel Mailing List
On 03/11/2018 03:03 AM, Vivek Unune wrote:
> Hi Rafał,
>
> On Sat, Mar 10, 2018 at 10:41:04PM +0100, Rafał Miłecki wrote:
>> On 10 March 2018 at 18:12, Vivek Unune <npcomplete13@gmail.com> wrote:
>>> Using BCH8 gives ecc errors and makes the router unsuable.
>>> Switching to BCH1 fixes these errors.
>>
>> Can you provide CFE's log messages starting with
>> "Decompressing...done" and up to the "Press Ctrl+C to stop in CFE"
>> please? I'd like to see what NAND info CFE prints there.
>
> See below. It does say BCH-8, however I can't get it to work.
>
> CFE log:
>
> Decompressing...done
> Found a Toshiba NAND flash:
> Total size: 128MB
> Block size: 128KB
> Page Size: 2048B
> OOB Size: 64B
> Sector size: 512B
> Spare size: 16B
> ECC level: 8 (8-bit)
> Device ID: 0x98 0xf1 0x80 0x15 0xf2 0x16
> find_devinfo: devinfo block found at 0x00180000!
>
> Press Ctrl+C to stop in CFE
What kind of error are you getting in Linux with BCH-8?
--
--
Florian
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH] ARM: BCM5301X: Fix NAND ECC parameters for Linksys Panamera
@ 2018-03-12 22:52 ` Florian Fainelli
0 siblings, 0 replies; 22+ messages in thread
From: Florian Fainelli @ 2018-03-12 22:52 UTC (permalink / raw)
To: linux-arm-kernel
On 03/11/2018 03:03 AM, Vivek Unune wrote:
> Hi Rafa?,
>
> On Sat, Mar 10, 2018 at 10:41:04PM +0100, Rafa? Mi?ecki wrote:
>> On 10 March 2018 at 18:12, Vivek Unune <npcomplete13@gmail.com> wrote:
>>> Using BCH8 gives ecc errors and makes the router unsuable.
>>> Switching to BCH1 fixes these errors.
>>
>> Can you provide CFE's log messages starting with
>> "Decompressing...done" and up to the "Press Ctrl+C to stop in CFE"
>> please? I'd like to see what NAND info CFE prints there.
>
> See below. It does say BCH-8, however I can't get it to work.
>
> CFE log:
>
> Decompressing...done
> Found a Toshiba NAND flash:
> Total size: 128MB
> Block size: 128KB
> Page Size: 2048B
> OOB Size: 64B
> Sector size: 512B
> Spare size: 16B
> ECC level: 8 (8-bit)
> Device ID: 0x98 0xf1 0x80 0x15 0xf2 0x16
> find_devinfo: devinfo block found at 0x00180000!
>
> Press Ctrl+C to stop in CFE
What kind of error are you getting in Linux with BCH-8?
--
--
Florian
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] ARM: BCM5301X: Fix NAND ECC parameters for Linksys Panamera
2018-03-12 22:52 ` Florian Fainelli
@ 2018-03-13 1:02 ` Vivek Unune
-1 siblings, 0 replies; 22+ messages in thread
From: Vivek Unune @ 2018-03-13 1:02 UTC (permalink / raw)
To: Florian Fainelli
Cc: Rafał Miłecki, Hauke Mehrtens, Jon Mason,
bcm-kernel-feedback-list, Rob Herring, Mark Rutland,
Russell King, linux-arm-kernel, devicetree,
Linux Kernel Mailing List
Hi Florian,
On Mon, Mar 12, 2018 at 03:52:27PM -0700, Florian Fainelli wrote:
> On 03/11/2018 03:03 AM, Vivek Unune wrote:
> > Hi Rafał,
> >
> > On Sat, Mar 10, 2018 at 10:41:04PM +0100, Rafał Miłecki wrote:
> >> On 10 March 2018 at 18:12, Vivek Unune <npcomplete13@gmail.com> wrote:
> >>> Using BCH8 gives ecc errors and makes the router unsuable.
> >>> Switching to BCH1 fixes these errors.
> >>
> >> Can you provide CFE's log messages starting with
> >> "Decompressing...done" and up to the "Press Ctrl+C to stop in CFE"
> >> please? I'd like to see what NAND info CFE prints there.
> >
> > See below. It does say BCH-8, however I can't get it to work.
> >
> > CFE log:
> >
> > Decompressing...done
> > Found a Toshiba NAND flash:
> > Total size: 128MB
> > Block size: 128KB
> > Page Size: 2048B
> > OOB Size: 64B
> > Sector size: 512B
> > Spare size: 16B
> > ECC level: 8 (8-bit)
> > Device ID: 0x98 0xf1 0x80 0x15 0xf2 0x16
> > find_devinfo: devinfo block found at 0x00180000!
> >
> > Press Ctrl+C to stop in CFE
>
> What kind of error are you getting in Linux with BCH-8?
See below:
[ 12.941850] Generic PHY dsa-1.0:03: attached PHY driver [Generic PHY] (mii_bus:phy_addr=dsa-1.0:03, irq=POLL)
[ 12.991851] Generic PHY dsa-1.0:04: attached PHY driver [Generic PHY] (mii_bus:phy_addr=dsa-1.0:04, irq=POLL)
[ 13.032404] UBI: auto-attach mtd5
[ 13.035731] ubi0: attaching mtd5
[ 13.115701] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 113:0, read only 64 bytes, retry
[ 13.127630] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 113:0, read only 64 bytes, retry
[ 13.139524] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 113:0, read only 64 bytes, retry
[ 13.151419] ubi0 error: 0xc037ca08: error -74 (ECC error) while reading 64 bytes from PEB 113:0, read 64 bytes
[ 13.161448] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.14.25 #0
[ 13.167460] Hardware name: BCM5301X
[ 13.170951] Backtrace:
[ 13.173398] Function entered at [<c0105ccc>] from [<c0105fb4>]
[ 13.179240] r7:00000000 r6:60000013 r5:00000000 r4:c081d988
[ 13.184903] Function entered at [<c0105f9c>] from [<c04f29a8>]
[ 13.190744] Function entered at [<c04f2918>] from [<c037ca0c>]
[ 13.196586] r7:00000000 r6:00000040 r5:c7954000 r4:ffffffb6
[ 13.202251] Function entered at [<c037c7dc>] from [<c037cd1c>]
[ 13.208095] r10:00000000 r9:00000040 r8:00000071 r7:c7954000 r6:c7979000 r5:c7036180
[ 13.215941] r4:c7b72900
[ 13.218475] Function entered at [<c037cca4>] from [<c0381c5c>]
[ 13.224318] r10:00000000 r9:c7979800 r8:c7954000 r7:c7979000 r6:00000071 r5:c7036180
[ 13.232157] r4:c7b72900
[ 13.234690] Function entered at [<c0381a84>] from [<c0376d74>]
[ 13.240534] r10:c7954040 r9:00000840 r8:c702e400 r7:00000000 r6:c702e400 r5:c7954000
[ 13.248381] r4:fffff800
[ 13.250914] Function entered at [<c0376720>] from [<c0717b9c>]
[ 13.256759] r10:c0813a88 r9:c0651c18 r8:c0651bec r7:c084ff48 r6:c081e440 r5:c7823ea4
[ 13.264605] r4:c702e400
[ 13.267139] Function entered at [<c0717954>] from [<c0101a8c>]
[ 13.272983] r10:c072e83c r9:c07366b8 r8:c0717954 r7:c072e838 r6:c081e440 r5:00000000
[ 13.280830] r4:c0803c08
[ 13.283363] Function entered at [<c01019dc>] from [<c0700e38>]
[ 13.289206] r9:c07366b8 r8:c0700594 r7:c072e838 r6:c081e440 r5:c081e440 r4:00000008
[ 13.296958] Function entered at [<c0700cf8>] from [<c0506adc>]
[ 13.302802] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0506acc
[ 13.310641] r4:00000000
[ 13.313175] Function entered at [<c0506acc>] from [<c0102788>]
[ 13.319015] r5:c0506acc r4:00000000
[ 13.323289] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 114:0, read only 64 bytes, retry
[ 13.335178] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 114:0, read only 64 bytes, retry
[ 13.347066] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 114:0, read only 64 bytes, retry
[ 13.358956] ubi0 error: 0xc037ca08: error -74 (ECC error) while reading 64 bytes from PEB 114:0, read 64 bytes
[ 13.368989] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.14.25 #0
[ 13.375007] Hardware name: BCM5301X
[ 13.378496] Backtrace:
[ 13.380943] Function entered at [<c0105ccc>] from [<c0105fb4>]
[ 13.386787] r7:00000000 r6:60000013 r5:00000000 r4:c081d988
[ 13.392450] Function entered at [<c0105f9c>] from [<c04f29a8>]
[ 13.398291] Function entered at [<c04f2918>] from [<c037ca0c>]
[ 13.404133] r7:00000000 r6:00000040 r5:c7954000 r4:ffffffb6
[ 13.409797] Function entered at [<c037c7dc>] from [<c037cd1c>]
[ 13.415641] r10:00000000 r9:00000040 r8:00000072 r7:c7954000 r6:c7979000 r5:c7036180
[ 13.423488] r4:c7b72900
[ 13.426021] Function entered at [<c037cca4>] from [<c0381c5c>]
[ 13.431865] r10:00000000 r9:c7979800 r8:c7954000 r7:c7979000 r6:00000072 r5:c7036180
[ 13.439704] r4:c7b72900
[ 13.442237] Function entered at [<c0381a84>] from [<c0376d74>]
[ 13.448081] r10:c7954040 r9:00000840 r8:c702e400 r7:00000000 r6:c702e400 r5:c7954000
[ 13.455928] r4:fffff800
[ 13.458461] Function entered at [<c0376720>] from [<c0717b9c>]
[ 13.464305] r10:c0813a88 r9:c0651c18 r8:c0651bec r7:c084ff48 r6:c081e440 r5:c7823ea4
[ 13.472152] r4:c702e400
[ 13.474685] Function entered at [<c0717954>] from [<c0101a8c>]
[ 13.480529] r10:c072e83c r9:c07366b8 r8:c0717954 r7:c072e838 r6:c081e440 r5:00000000
[ 13.488376] r4:c0803c08
[ 13.490909] Function entered at [<c01019dc>] from [<c0700e38>]
[ 13.496754] r9:c07366b8 r8:c0700594 r7:c072e838 r6:c081e440 r5:c081e440 r4:00000008
[ 13.504514] Function entered at [<c0700cf8>] from [<c0506adc>]
[ 13.510358] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0506acc
[ 13.518197] r4:00000000
[ 13.520730] Function entered at [<c0506acc>] from [<c0102788>]
[ 13.526570] r5:c0506acc r4:00000000
[ 13.530863] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read only 64 bytes, retry
[ 13.542763] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read only 64 bytes, retry
[ 13.554659] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read only 64 bytes, retry
[ 13.566548] ubi0 error: 0xc037ca08: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read 64 bytes
[ 13.576574] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.25 #0
[ 13.582589] Hardware name: BCM5301X
[ 13.586078] Backtrace:
[ 13.588526] Function entered at [<c0105ccc>] from [<c0105fb4>]
[ 13.594368] r7:00000000 r6:60000013 r5:00000000 r4:c081d988
[ 13.600032] Function entered at [<c0105f9c>] from [<c04f29a8>]
[ 13.605872] Function entered at [<c04f2918>] from [<c037ca0c>]
[ 13.611714] r7:00000000 r6:00000040 r5:c7954000 r4:ffffffb6
[ 13.617378] Function entered at [<c037c7dc>] from [<c037cd1c>]
[ 13.623223] r10:00000000 r9:00000040 r8:00000073 r7:c7954000 r6:c7979000 r5:c7036180
[ 13.631071] r4:c7b72900
[ 13.633604] Function entered at [<c037cca4>] from [<c0381c5c>]
[ 13.639447] r10:00000000 r9:c7979800 r8:c7954000 r7:c7979000 r6:00000073 r5:c7036180
[ 13.647286] r4:c7b72900
[ 13.649819] Function entered at [<c0381a84>] from [<c0376d74>]
[ 13.655663] r10:c7954040 r9:00000840 r8:c702e400 r7:00000000 r6:c702e400 r5:c7954000
[ 13.663510] r4:fffff800
[ 13.666042] Function entered at [<c0376720>] from [<c0717b9c>]
[ 13.671886] r10:c0813a88 r9:c0651c18 r8:c0651bec r7:c084ff48 r6:c081e440 r5:c7823ea4
[ 13.679725] r4:c702e400
[ 13.682258] Function entered at [<c0717954>] from [<c0101a8c>]
[ 13.688103] r10:c072e83c r9:c07366b8 r8:c0717954 r7:c072e838 r6:c081e440 r5:00000000
[ 13.695949] r4:c0803c08
[ 13.698482] Function entered at [<c01019dc>] from [<c0700e38>]
[ 13.704327] r9:c07366b8 r8:c0700594 r7:c072e838 r6:c081e440 r5:c081e440 r4:00000008
[ 13.712087] Function entered at [<c0700cf8>] from [<c0506adc>]
[ 13.717930] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0506acc
[ 13.725769] r4:00000000
[ 13.728303] Function entered at [<c0506acc>] from [<c0102788>]
[ 13.734144] r5:c0506acc r4:00000000
[ 13.738425] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 116:0, read only 64 bytes, retry
[ 13.750319] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 116:0, read only 64 bytes, retry
[ 13.762213] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 116:0, read only 64 bytes, retry
[ 13.774103] ubi0 error: 0xc037ca08: error -74 (ECC error) while reading 64 bytes from PEB 116:0, read 64 bytes
[ 13.784130] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.25 #0
Thanks,
Vivek
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH] ARM: BCM5301X: Fix NAND ECC parameters for Linksys Panamera
@ 2018-03-13 1:02 ` Vivek Unune
0 siblings, 0 replies; 22+ messages in thread
From: Vivek Unune @ 2018-03-13 1:02 UTC (permalink / raw)
To: linux-arm-kernel
Hi Florian,
On Mon, Mar 12, 2018 at 03:52:27PM -0700, Florian Fainelli wrote:
> On 03/11/2018 03:03 AM, Vivek Unune wrote:
> > Hi Rafa?,
> >
> > On Sat, Mar 10, 2018 at 10:41:04PM +0100, Rafa? Mi?ecki wrote:
> >> On 10 March 2018 at 18:12, Vivek Unune <npcomplete13@gmail.com> wrote:
> >>> Using BCH8 gives ecc errors and makes the router unsuable.
> >>> Switching to BCH1 fixes these errors.
> >>
> >> Can you provide CFE's log messages starting with
> >> "Decompressing...done" and up to the "Press Ctrl+C to stop in CFE"
> >> please? I'd like to see what NAND info CFE prints there.
> >
> > See below. It does say BCH-8, however I can't get it to work.
> >
> > CFE log:
> >
> > Decompressing...done
> > Found a Toshiba NAND flash:
> > Total size: 128MB
> > Block size: 128KB
> > Page Size: 2048B
> > OOB Size: 64B
> > Sector size: 512B
> > Spare size: 16B
> > ECC level: 8 (8-bit)
> > Device ID: 0x98 0xf1 0x80 0x15 0xf2 0x16
> > find_devinfo: devinfo block found at 0x00180000!
> >
> > Press Ctrl+C to stop in CFE
>
> What kind of error are you getting in Linux with BCH-8?
See below:
[ 12.941850] Generic PHY dsa-1.0:03: attached PHY driver [Generic PHY] (mii_bus:phy_addr=dsa-1.0:03, irq=POLL)
[ 12.991851] Generic PHY dsa-1.0:04: attached PHY driver [Generic PHY] (mii_bus:phy_addr=dsa-1.0:04, irq=POLL)
[ 13.032404] UBI: auto-attach mtd5
[ 13.035731] ubi0: attaching mtd5
[ 13.115701] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 113:0, read only 64 bytes, retry
[ 13.127630] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 113:0, read only 64 bytes, retry
[ 13.139524] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 113:0, read only 64 bytes, retry
[ 13.151419] ubi0 error: 0xc037ca08: error -74 (ECC error) while reading 64 bytes from PEB 113:0, read 64 bytes
[ 13.161448] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.14.25 #0
[ 13.167460] Hardware name: BCM5301X
[ 13.170951] Backtrace:
[ 13.173398] Function entered at [<c0105ccc>] from [<c0105fb4>]
[ 13.179240] r7:00000000 r6:60000013 r5:00000000 r4:c081d988
[ 13.184903] Function entered at [<c0105f9c>] from [<c04f29a8>]
[ 13.190744] Function entered at [<c04f2918>] from [<c037ca0c>]
[ 13.196586] r7:00000000 r6:00000040 r5:c7954000 r4:ffffffb6
[ 13.202251] Function entered at [<c037c7dc>] from [<c037cd1c>]
[ 13.208095] r10:00000000 r9:00000040 r8:00000071 r7:c7954000 r6:c7979000 r5:c7036180
[ 13.215941] r4:c7b72900
[ 13.218475] Function entered at [<c037cca4>] from [<c0381c5c>]
[ 13.224318] r10:00000000 r9:c7979800 r8:c7954000 r7:c7979000 r6:00000071 r5:c7036180
[ 13.232157] r4:c7b72900
[ 13.234690] Function entered at [<c0381a84>] from [<c0376d74>]
[ 13.240534] r10:c7954040 r9:00000840 r8:c702e400 r7:00000000 r6:c702e400 r5:c7954000
[ 13.248381] r4:fffff800
[ 13.250914] Function entered at [<c0376720>] from [<c0717b9c>]
[ 13.256759] r10:c0813a88 r9:c0651c18 r8:c0651bec r7:c084ff48 r6:c081e440 r5:c7823ea4
[ 13.264605] r4:c702e400
[ 13.267139] Function entered at [<c0717954>] from [<c0101a8c>]
[ 13.272983] r10:c072e83c r9:c07366b8 r8:c0717954 r7:c072e838 r6:c081e440 r5:00000000
[ 13.280830] r4:c0803c08
[ 13.283363] Function entered at [<c01019dc>] from [<c0700e38>]
[ 13.289206] r9:c07366b8 r8:c0700594 r7:c072e838 r6:c081e440 r5:c081e440 r4:00000008
[ 13.296958] Function entered at [<c0700cf8>] from [<c0506adc>]
[ 13.302802] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0506acc
[ 13.310641] r4:00000000
[ 13.313175] Function entered at [<c0506acc>] from [<c0102788>]
[ 13.319015] r5:c0506acc r4:00000000
[ 13.323289] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 114:0, read only 64 bytes, retry
[ 13.335178] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 114:0, read only 64 bytes, retry
[ 13.347066] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 114:0, read only 64 bytes, retry
[ 13.358956] ubi0 error: 0xc037ca08: error -74 (ECC error) while reading 64 bytes from PEB 114:0, read 64 bytes
[ 13.368989] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.14.25 #0
[ 13.375007] Hardware name: BCM5301X
[ 13.378496] Backtrace:
[ 13.380943] Function entered at [<c0105ccc>] from [<c0105fb4>]
[ 13.386787] r7:00000000 r6:60000013 r5:00000000 r4:c081d988
[ 13.392450] Function entered at [<c0105f9c>] from [<c04f29a8>]
[ 13.398291] Function entered at [<c04f2918>] from [<c037ca0c>]
[ 13.404133] r7:00000000 r6:00000040 r5:c7954000 r4:ffffffb6
[ 13.409797] Function entered at [<c037c7dc>] from [<c037cd1c>]
[ 13.415641] r10:00000000 r9:00000040 r8:00000072 r7:c7954000 r6:c7979000 r5:c7036180
[ 13.423488] r4:c7b72900
[ 13.426021] Function entered at [<c037cca4>] from [<c0381c5c>]
[ 13.431865] r10:00000000 r9:c7979800 r8:c7954000 r7:c7979000 r6:00000072 r5:c7036180
[ 13.439704] r4:c7b72900
[ 13.442237] Function entered at [<c0381a84>] from [<c0376d74>]
[ 13.448081] r10:c7954040 r9:00000840 r8:c702e400 r7:00000000 r6:c702e400 r5:c7954000
[ 13.455928] r4:fffff800
[ 13.458461] Function entered at [<c0376720>] from [<c0717b9c>]
[ 13.464305] r10:c0813a88 r9:c0651c18 r8:c0651bec r7:c084ff48 r6:c081e440 r5:c7823ea4
[ 13.472152] r4:c702e400
[ 13.474685] Function entered at [<c0717954>] from [<c0101a8c>]
[ 13.480529] r10:c072e83c r9:c07366b8 r8:c0717954 r7:c072e838 r6:c081e440 r5:00000000
[ 13.488376] r4:c0803c08
[ 13.490909] Function entered at [<c01019dc>] from [<c0700e38>]
[ 13.496754] r9:c07366b8 r8:c0700594 r7:c072e838 r6:c081e440 r5:c081e440 r4:00000008
[ 13.504514] Function entered at [<c0700cf8>] from [<c0506adc>]
[ 13.510358] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0506acc
[ 13.518197] r4:00000000
[ 13.520730] Function entered at [<c0506acc>] from [<c0102788>]
[ 13.526570] r5:c0506acc r4:00000000
[ 13.530863] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read only 64 bytes, retry
[ 13.542763] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read only 64 bytes, retry
[ 13.554659] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read only 64 bytes, retry
[ 13.566548] ubi0 error: 0xc037ca08: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read 64 bytes
[ 13.576574] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.25 #0
[ 13.582589] Hardware name: BCM5301X
[ 13.586078] Backtrace:
[ 13.588526] Function entered at [<c0105ccc>] from [<c0105fb4>]
[ 13.594368] r7:00000000 r6:60000013 r5:00000000 r4:c081d988
[ 13.600032] Function entered at [<c0105f9c>] from [<c04f29a8>]
[ 13.605872] Function entered at [<c04f2918>] from [<c037ca0c>]
[ 13.611714] r7:00000000 r6:00000040 r5:c7954000 r4:ffffffb6
[ 13.617378] Function entered at [<c037c7dc>] from [<c037cd1c>]
[ 13.623223] r10:00000000 r9:00000040 r8:00000073 r7:c7954000 r6:c7979000 r5:c7036180
[ 13.631071] r4:c7b72900
[ 13.633604] Function entered at [<c037cca4>] from [<c0381c5c>]
[ 13.639447] r10:00000000 r9:c7979800 r8:c7954000 r7:c7979000 r6:00000073 r5:c7036180
[ 13.647286] r4:c7b72900
[ 13.649819] Function entered at [<c0381a84>] from [<c0376d74>]
[ 13.655663] r10:c7954040 r9:00000840 r8:c702e400 r7:00000000 r6:c702e400 r5:c7954000
[ 13.663510] r4:fffff800
[ 13.666042] Function entered at [<c0376720>] from [<c0717b9c>]
[ 13.671886] r10:c0813a88 r9:c0651c18 r8:c0651bec r7:c084ff48 r6:c081e440 r5:c7823ea4
[ 13.679725] r4:c702e400
[ 13.682258] Function entered at [<c0717954>] from [<c0101a8c>]
[ 13.688103] r10:c072e83c r9:c07366b8 r8:c0717954 r7:c072e838 r6:c081e440 r5:00000000
[ 13.695949] r4:c0803c08
[ 13.698482] Function entered at [<c01019dc>] from [<c0700e38>]
[ 13.704327] r9:c07366b8 r8:c0700594 r7:c072e838 r6:c081e440 r5:c081e440 r4:00000008
[ 13.712087] Function entered at [<c0700cf8>] from [<c0506adc>]
[ 13.717930] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0506acc
[ 13.725769] r4:00000000
[ 13.728303] Function entered at [<c0506acc>] from [<c0102788>]
[ 13.734144] r5:c0506acc r4:00000000
[ 13.738425] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 116:0, read only 64 bytes, retry
[ 13.750319] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 116:0, read only 64 bytes, retry
[ 13.762213] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 116:0, read only 64 bytes, retry
[ 13.774103] ubi0 error: 0xc037ca08: error -74 (ECC error) while reading 64 bytes from PEB 116:0, read 64 bytes
[ 13.784130] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.25 #0
Thanks,
Vivek
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] ARM: BCM5301X: Fix NAND ECC parameters for Linksys Panamera
2018-03-11 10:03 ` Vivek Unune
@ 2018-04-25 8:51 ` Rafał Miłecki
-1 siblings, 0 replies; 22+ messages in thread
From: Rafał Miłecki @ 2018-04-25 8:51 UTC (permalink / raw)
To: Vivek Unune
Cc: florian.fainelli, Hauke Mehrtens, Jon Mason,
bcm-kernel-feedback-list, Rob Herring, Mark Rutland,
Russell King, linux-arm-kernel, devicetree,
Linux Kernel Mailing List
On 11 March 2018 at 11:03, Vivek Unune <npcomplete13@gmail.com> wrote:
> Hi Rafał,
>
> On Sat, Mar 10, 2018 at 10:41:04PM +0100, Rafał Miłecki wrote:
>> On 10 March 2018 at 18:12, Vivek Unune <npcomplete13@gmail.com> wrote:
>> > Using BCH8 gives ecc errors and makes the router unsuable.
>> > Switching to BCH1 fixes these errors.
>>
>> Can you provide CFE's log messages starting with
>> "Decompressing...done" and up to the "Press Ctrl+C to stop in CFE"
>> please? I'd like to see what NAND info CFE prints there.
>
> See below. It does say BCH-8, however I can't get it to work.
>
> CFE log:
>
> Decompressing...done
> Found a Toshiba NAND flash:
> Total size: 128MB
> Block size: 128KB
> Page Size: 2048B
> OOB Size: 64B
> Sector size: 512B
> Spare size: 16B
> ECC level: 8 (8-bit)
> Device ID: 0x98 0xf1 0x80 0x15 0xf2 0x16
> find_devinfo: devinfo block found at 0x00180000!
>
> Press Ctrl+C to stop in CFE
This means that:
1) Default mode for your NAND controller is BCH8 (setup at hw level)
2) CFE uses BCH8 when programming flash with provided firmware
For maximum compatibility DTS should describe ECC as using BCH8 and
Linux should use BCH8.
I spent whole day yesterday experimenting with BCM47094 and NAND
controller to understand your case better.
As crazy as it sounds, my NAND controller working in BCH4 mode is
reading flash data programmed using BCH8 perfectly fine! I was testing
& verifying that behavior multiple times for hours. It really works.
I noticed that on my BCM47094 board with CFE working in BCH8:
1) Flashing firmware with CFE results in using BCH8 (expected)
2) Linux with NAND controller in BCH4 can read flash data (unexpected!)
3) Writing flash data results in using BCH4
Above write test proves that NAND controller is really setup into BCH4
mode correctly. How is it possible it reads flash data programmed
using BCH8 is out of my imagination.
Long story short I believe your patch is wrong. DTS should describe
hardware and by default this board uses BCH8 (and so the bootloader).
Current DTS is correct.
As it happens your patch doesn't break anything directly because of
unexpected NAND controller behavior. It's just a matter of "luck"
though due to some weird hardware behavior.
--
Rafał
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH] ARM: BCM5301X: Fix NAND ECC parameters for Linksys Panamera
@ 2018-04-25 8:51 ` Rafał Miłecki
0 siblings, 0 replies; 22+ messages in thread
From: Rafał Miłecki @ 2018-04-25 8:51 UTC (permalink / raw)
To: linux-arm-kernel
On 11 March 2018 at 11:03, Vivek Unune <npcomplete13@gmail.com> wrote:
> Hi Rafa?,
>
> On Sat, Mar 10, 2018 at 10:41:04PM +0100, Rafa? Mi?ecki wrote:
>> On 10 March 2018 at 18:12, Vivek Unune <npcomplete13@gmail.com> wrote:
>> > Using BCH8 gives ecc errors and makes the router unsuable.
>> > Switching to BCH1 fixes these errors.
>>
>> Can you provide CFE's log messages starting with
>> "Decompressing...done" and up to the "Press Ctrl+C to stop in CFE"
>> please? I'd like to see what NAND info CFE prints there.
>
> See below. It does say BCH-8, however I can't get it to work.
>
> CFE log:
>
> Decompressing...done
> Found a Toshiba NAND flash:
> Total size: 128MB
> Block size: 128KB
> Page Size: 2048B
> OOB Size: 64B
> Sector size: 512B
> Spare size: 16B
> ECC level: 8 (8-bit)
> Device ID: 0x98 0xf1 0x80 0x15 0xf2 0x16
> find_devinfo: devinfo block found at 0x00180000!
>
> Press Ctrl+C to stop in CFE
This means that:
1) Default mode for your NAND controller is BCH8 (setup at hw level)
2) CFE uses BCH8 when programming flash with provided firmware
For maximum compatibility DTS should describe ECC as using BCH8 and
Linux should use BCH8.
I spent whole day yesterday experimenting with BCM47094 and NAND
controller to understand your case better.
As crazy as it sounds, my NAND controller working in BCH4 mode is
reading flash data programmed using BCH8 perfectly fine! I was testing
& verifying that behavior multiple times for hours. It really works.
I noticed that on my BCM47094 board with CFE working in BCH8:
1) Flashing firmware with CFE results in using BCH8 (expected)
2) Linux with NAND controller in BCH4 can read flash data (unexpected!)
3) Writing flash data results in using BCH4
Above write test proves that NAND controller is really setup into BCH4
mode correctly. How is it possible it reads flash data programmed
using BCH8 is out of my imagination.
Long story short I believe your patch is wrong. DTS should describe
hardware and by default this board uses BCH8 (and so the bootloader).
Current DTS is correct.
As it happens your patch doesn't break anything directly because of
unexpected NAND controller behavior. It's just a matter of "luck"
though due to some weird hardware behavior.
--
Rafa?
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] ARM: BCM5301X: Fix NAND ECC parameters for Linksys Panamera
2018-03-13 1:02 ` Vivek Unune
(?)
@ 2018-04-25 9:02 ` Rafał Miłecki
-1 siblings, 0 replies; 22+ messages in thread
From: Rafał Miłecki @ 2018-04-25 9:02 UTC (permalink / raw)
To: Vivek Unune, Florian Fainelli
Cc: Hauke Mehrtens, Jon Mason, bcm-kernel-feedback-list, Rob Herring,
Mark Rutland, Russell King, linux-arm-kernel, devicetree,
Linux Kernel Mailing List
On 13.03.2018 02:02, Vivek Unune wrote:
> On Mon, Mar 12, 2018 at 03:52:27PM -0700, Florian Fainelli wrote:
>> On 03/11/2018 03:03 AM, Vivek Unune wrote:
>>> Hi Rafał,
>>>
>>> On Sat, Mar 10, 2018 at 10:41:04PM +0100, Rafał Miłecki wrote:
>>>> On 10 March 2018 at 18:12, Vivek Unune <npcomplete13@gmail.com> wrote:
>>>>> Using BCH8 gives ecc errors and makes the router unsuable.
>>>>> Switching to BCH1 fixes these errors.
>>>>
>>>> Can you provide CFE's log messages starting with
>>>> "Decompressing...done" and up to the "Press Ctrl+C to stop in CFE"
>>>> please? I'd like to see what NAND info CFE prints there.
>>>
>>> See below. It does say BCH-8, however I can't get it to work.
>>>
>>> CFE log:
>>>
>>> Decompressing...done
>>> Found a Toshiba NAND flash:
>>> Total size: 128MB
>>> Block size: 128KB
>>> Page Size: 2048B
>>> OOB Size: 64B
>>> Sector size: 512B
>>> Spare size: 16B
>>> ECC level: 8 (8-bit)
>>> Device ID: 0x98 0xf1 0x80 0x15 0xf2 0x16
>>> find_devinfo: devinfo block found at 0x00180000!
>>>
>>> Press Ctrl+C to stop in CFE
>>
>> What kind of error are you getting in Linux with BCH-8?
>
> See below:
>
> [ 12.941850] Generic PHY dsa-1.0:03: attached PHY driver [Generic PHY] (mii_bus:phy_addr=dsa-1.0:03, irq=POLL)
> [ 12.991851] Generic PHY dsa-1.0:04: attached PHY driver [Generic PHY] (mii_bus:phy_addr=dsa-1.0:04, irq=POLL)
> [ 13.032404] UBI: auto-attach mtd5
> [ 13.035731] ubi0: attaching mtd5
> [ 13.115701] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 113:0, read only 64 bytes, retry
> [ 13.127630] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 113:0, read only 64 bytes, retry
> [ 13.139524] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 113:0, read only 64 bytes, retry
> [ 13.151419] ubi0 error: 0xc037ca08: error -74 (ECC error) while reading 64 bytes from PEB 113:0, read 64 bytes
> [ 13.161448] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.14.25 #0
> [ 13.167460] Hardware name: BCM5301X
> [ 13.170951] Backtrace:
> [ 13.173398] Function entered at [<c0105ccc>] from [<c0105fb4>]
> [ 13.179240] r7:00000000 r6:60000013 r5:00000000 r4:c081d988
> [ 13.184903] Function entered at [<c0105f9c>] from [<c04f29a8>]
> [ 13.190744] Function entered at [<c04f2918>] from [<c037ca0c>]
> [ 13.196586] r7:00000000 r6:00000040 r5:c7954000 r4:ffffffb6
> [ 13.202251] Function entered at [<c037c7dc>] from [<c037cd1c>]
> [ 13.208095] r10:00000000 r9:00000040 r8:00000071 r7:c7954000 r6:c7979000 r5:c7036180
> [ 13.215941] r4:c7b72900
> [ 13.218475] Function entered at [<c037cca4>] from [<c0381c5c>]
> [ 13.224318] r10:00000000 r9:c7979800 r8:c7954000 r7:c7979000 r6:00000071 r5:c7036180
> [ 13.232157] r4:c7b72900
> [ 13.234690] Function entered at [<c0381a84>] from [<c0376d74>]
> [ 13.240534] r10:c7954040 r9:00000840 r8:c702e400 r7:00000000 r6:c702e400 r5:c7954000
> [ 13.248381] r4:fffff800
> [ 13.250914] Function entered at [<c0376720>] from [<c0717b9c>]
> [ 13.256759] r10:c0813a88 r9:c0651c18 r8:c0651bec r7:c084ff48 r6:c081e440 r5:c7823ea4
> [ 13.264605] r4:c702e400
> [ 13.267139] Function entered at [<c0717954>] from [<c0101a8c>]
> [ 13.272983] r10:c072e83c r9:c07366b8 r8:c0717954 r7:c072e838 r6:c081e440 r5:00000000
> [ 13.280830] r4:c0803c08
> [ 13.283363] Function entered at [<c01019dc>] from [<c0700e38>]
> [ 13.289206] r9:c07366b8 r8:c0700594 r7:c072e838 r6:c081e440 r5:c081e440 r4:00000008
> [ 13.296958] Function entered at [<c0700cf8>] from [<c0506adc>]
> [ 13.302802] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0506acc
> [ 13.310641] r4:00000000
> [ 13.313175] Function entered at [<c0506acc>] from [<c0102788>]
> [ 13.319015] r5:c0506acc r4:00000000
> [ 13.323289] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 114:0, read only 64 bytes, retry
> [ 13.335178] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 114:0, read only 64 bytes, retry
> [ 13.347066] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 114:0, read only 64 bytes, retry
> [ 13.358956] ubi0 error: 0xc037ca08: error -74 (ECC error) while reading 64 bytes from PEB 114:0, read 64 bytes
> [ 13.368989] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.14.25 #0
> [ 13.375007] Hardware name: BCM5301X
> [ 13.378496] Backtrace:
> [ 13.380943] Function entered at [<c0105ccc>] from [<c0105fb4>]
> [ 13.386787] r7:00000000 r6:60000013 r5:00000000 r4:c081d988
> [ 13.392450] Function entered at [<c0105f9c>] from [<c04f29a8>]
> [ 13.398291] Function entered at [<c04f2918>] from [<c037ca0c>]
> [ 13.404133] r7:00000000 r6:00000040 r5:c7954000 r4:ffffffb6
> [ 13.409797] Function entered at [<c037c7dc>] from [<c037cd1c>]
> [ 13.415641] r10:00000000 r9:00000040 r8:00000072 r7:c7954000 r6:c7979000 r5:c7036180
> [ 13.423488] r4:c7b72900
> [ 13.426021] Function entered at [<c037cca4>] from [<c0381c5c>]
> [ 13.431865] r10:00000000 r9:c7979800 r8:c7954000 r7:c7979000 r6:00000072 r5:c7036180
> [ 13.439704] r4:c7b72900
> [ 13.442237] Function entered at [<c0381a84>] from [<c0376d74>]
> [ 13.448081] r10:c7954040 r9:00000840 r8:c702e400 r7:00000000 r6:c702e400 r5:c7954000
> [ 13.455928] r4:fffff800
> [ 13.458461] Function entered at [<c0376720>] from [<c0717b9c>]
> [ 13.464305] r10:c0813a88 r9:c0651c18 r8:c0651bec r7:c084ff48 r6:c081e440 r5:c7823ea4
> [ 13.472152] r4:c702e400
> [ 13.474685] Function entered at [<c0717954>] from [<c0101a8c>]
> [ 13.480529] r10:c072e83c r9:c07366b8 r8:c0717954 r7:c072e838 r6:c081e440 r5:00000000
> [ 13.488376] r4:c0803c08
> [ 13.490909] Function entered at [<c01019dc>] from [<c0700e38>]
> [ 13.496754] r9:c07366b8 r8:c0700594 r7:c072e838 r6:c081e440 r5:c081e440 r4:00000008
> [ 13.504514] Function entered at [<c0700cf8>] from [<c0506adc>]
> [ 13.510358] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0506acc
> [ 13.518197] r4:00000000
> [ 13.520730] Function entered at [<c0506acc>] from [<c0102788>]
> [ 13.526570] r5:c0506acc r4:00000000
> [ 13.530863] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read only 64 bytes, retry
> [ 13.542763] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read only 64 bytes, retry
> [ 13.554659] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read only 64 bytes, retry
> [ 13.566548] ubi0 error: 0xc037ca08: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read 64 bytes
> [ 13.576574] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.25 #0
> [ 13.582589] Hardware name: BCM5301X
> [ 13.586078] Backtrace:
> [ 13.588526] Function entered at [<c0105ccc>] from [<c0105fb4>]
> [ 13.594368] r7:00000000 r6:60000013 r5:00000000 r4:c081d988
> [ 13.600032] Function entered at [<c0105f9c>] from [<c04f29a8>]
> [ 13.605872] Function entered at [<c04f2918>] from [<c037ca0c>]
> [ 13.611714] r7:00000000 r6:00000040 r5:c7954000 r4:ffffffb6
> [ 13.617378] Function entered at [<c037c7dc>] from [<c037cd1c>]
> [ 13.623223] r10:00000000 r9:00000040 r8:00000073 r7:c7954000 r6:c7979000 r5:c7036180
> [ 13.631071] r4:c7b72900
> [ 13.633604] Function entered at [<c037cca4>] from [<c0381c5c>]
> [ 13.639447] r10:00000000 r9:c7979800 r8:c7954000 r7:c7979000 r6:00000073 r5:c7036180
> [ 13.647286] r4:c7b72900
> [ 13.649819] Function entered at [<c0381a84>] from [<c0376d74>]
> [ 13.655663] r10:c7954040 r9:00000840 r8:c702e400 r7:00000000 r6:c702e400 r5:c7954000
> [ 13.663510] r4:fffff800
> [ 13.666042] Function entered at [<c0376720>] from [<c0717b9c>]
> [ 13.671886] r10:c0813a88 r9:c0651c18 r8:c0651bec r7:c084ff48 r6:c081e440 r5:c7823ea4
> [ 13.679725] r4:c702e400
> [ 13.682258] Function entered at [<c0717954>] from [<c0101a8c>]
> [ 13.688103] r10:c072e83c r9:c07366b8 r8:c0717954 r7:c072e838 r6:c081e440 r5:00000000
> [ 13.695949] r4:c0803c08
> [ 13.698482] Function entered at [<c01019dc>] from [<c0700e38>]
> [ 13.704327] r9:c07366b8 r8:c0700594 r7:c072e838 r6:c081e440 r5:c081e440 r4:00000008
> [ 13.712087] Function entered at [<c0700cf8>] from [<c0506adc>]
> [ 13.717930] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0506acc
> [ 13.725769] r4:00000000
> [ 13.728303] Function entered at [<c0506acc>] from [<c0102788>]
> [ 13.734144] r5:c0506acc r4:00000000
> [ 13.738425] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 116:0, read only 64 bytes, retry
> [ 13.750319] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 116:0, read only 64 bytes, retry
> [ 13.762213] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 116:0, read only 64 bytes, retry
> [ 13.774103] ubi0 error: 0xc037ca08: error -74 (ECC error) while reading 64 bytes from PEB 116:0, read 64 bytes
> [ 13.784130] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.25 #0
This is expected if you previously were using firmware programming flash
in non-BCH8 mode. The main reason for what you're seeing is that when
flashing image with CFE it doesn't erase all NAND pages.
If previously you were using firmware programming flash in BCH1 mode, it
means that after flashing firmware using BCH8 you'll end up with mess in
ECC.
Part of NAND flash programmed by CFE will use BCH8.
Part of NAND flash that remained from previous fw will use BCH1.
Linux will fail to read part of NAND flash from prev installation.
The cleanest solution: erase all NAND content of firmware partition
before flashing firmware using BCH8.
The easiest solution: ignore all these "error -74 (ECC error) while
reading" errors (they may last for few minutes!). I believe UBI should
simply recreate all pages it couldn't access and once you wait long
enough, all your NAND flash will be using BCH8.
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] ARM: BCM5301X: Fix NAND ECC parameters for Linksys Panamera
@ 2018-04-25 9:02 ` Rafał Miłecki
0 siblings, 0 replies; 22+ messages in thread
From: Rafał Miłecki @ 2018-04-25 9:02 UTC (permalink / raw)
To: Vivek Unune, Florian Fainelli
Cc: Mark Rutland, devicetree, Jon Mason, Hauke Mehrtens,
Russell King, Linux Kernel Mailing List, Rob Herring,
bcm-kernel-feedback-list, linux-arm-kernel
On 13.03.2018 02:02, Vivek Unune wrote:
> On Mon, Mar 12, 2018 at 03:52:27PM -0700, Florian Fainelli wrote:
>> On 03/11/2018 03:03 AM, Vivek Unune wrote:
>>> Hi Rafał,
>>>
>>> On Sat, Mar 10, 2018 at 10:41:04PM +0100, Rafał Miłecki wrote:
>>>> On 10 March 2018 at 18:12, Vivek Unune <npcomplete13@gmail.com> wrote:
>>>>> Using BCH8 gives ecc errors and makes the router unsuable.
>>>>> Switching to BCH1 fixes these errors.
>>>>
>>>> Can you provide CFE's log messages starting with
>>>> "Decompressing...done" and up to the "Press Ctrl+C to stop in CFE"
>>>> please? I'd like to see what NAND info CFE prints there.
>>>
>>> See below. It does say BCH-8, however I can't get it to work.
>>>
>>> CFE log:
>>>
>>> Decompressing...done
>>> Found a Toshiba NAND flash:
>>> Total size: 128MB
>>> Block size: 128KB
>>> Page Size: 2048B
>>> OOB Size: 64B
>>> Sector size: 512B
>>> Spare size: 16B
>>> ECC level: 8 (8-bit)
>>> Device ID: 0x98 0xf1 0x80 0x15 0xf2 0x16
>>> find_devinfo: devinfo block found at 0x00180000!
>>>
>>> Press Ctrl+C to stop in CFE
>>
>> What kind of error are you getting in Linux with BCH-8?
>
> See below:
>
> [ 12.941850] Generic PHY dsa-1.0:03: attached PHY driver [Generic PHY] (mii_bus:phy_addr=dsa-1.0:03, irq=POLL)
> [ 12.991851] Generic PHY dsa-1.0:04: attached PHY driver [Generic PHY] (mii_bus:phy_addr=dsa-1.0:04, irq=POLL)
> [ 13.032404] UBI: auto-attach mtd5
> [ 13.035731] ubi0: attaching mtd5
> [ 13.115701] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 113:0, read only 64 bytes, retry
> [ 13.127630] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 113:0, read only 64 bytes, retry
> [ 13.139524] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 113:0, read only 64 bytes, retry
> [ 13.151419] ubi0 error: 0xc037ca08: error -74 (ECC error) while reading 64 bytes from PEB 113:0, read 64 bytes
> [ 13.161448] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.14.25 #0
> [ 13.167460] Hardware name: BCM5301X
> [ 13.170951] Backtrace:
> [ 13.173398] Function entered at [<c0105ccc>] from [<c0105fb4>]
> [ 13.179240] r7:00000000 r6:60000013 r5:00000000 r4:c081d988
> [ 13.184903] Function entered at [<c0105f9c>] from [<c04f29a8>]
> [ 13.190744] Function entered at [<c04f2918>] from [<c037ca0c>]
> [ 13.196586] r7:00000000 r6:00000040 r5:c7954000 r4:ffffffb6
> [ 13.202251] Function entered at [<c037c7dc>] from [<c037cd1c>]
> [ 13.208095] r10:00000000 r9:00000040 r8:00000071 r7:c7954000 r6:c7979000 r5:c7036180
> [ 13.215941] r4:c7b72900
> [ 13.218475] Function entered at [<c037cca4>] from [<c0381c5c>]
> [ 13.224318] r10:00000000 r9:c7979800 r8:c7954000 r7:c7979000 r6:00000071 r5:c7036180
> [ 13.232157] r4:c7b72900
> [ 13.234690] Function entered at [<c0381a84>] from [<c0376d74>]
> [ 13.240534] r10:c7954040 r9:00000840 r8:c702e400 r7:00000000 r6:c702e400 r5:c7954000
> [ 13.248381] r4:fffff800
> [ 13.250914] Function entered at [<c0376720>] from [<c0717b9c>]
> [ 13.256759] r10:c0813a88 r9:c0651c18 r8:c0651bec r7:c084ff48 r6:c081e440 r5:c7823ea4
> [ 13.264605] r4:c702e400
> [ 13.267139] Function entered at [<c0717954>] from [<c0101a8c>]
> [ 13.272983] r10:c072e83c r9:c07366b8 r8:c0717954 r7:c072e838 r6:c081e440 r5:00000000
> [ 13.280830] r4:c0803c08
> [ 13.283363] Function entered at [<c01019dc>] from [<c0700e38>]
> [ 13.289206] r9:c07366b8 r8:c0700594 r7:c072e838 r6:c081e440 r5:c081e440 r4:00000008
> [ 13.296958] Function entered at [<c0700cf8>] from [<c0506adc>]
> [ 13.302802] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0506acc
> [ 13.310641] r4:00000000
> [ 13.313175] Function entered at [<c0506acc>] from [<c0102788>]
> [ 13.319015] r5:c0506acc r4:00000000
> [ 13.323289] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 114:0, read only 64 bytes, retry
> [ 13.335178] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 114:0, read only 64 bytes, retry
> [ 13.347066] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 114:0, read only 64 bytes, retry
> [ 13.358956] ubi0 error: 0xc037ca08: error -74 (ECC error) while reading 64 bytes from PEB 114:0, read 64 bytes
> [ 13.368989] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.14.25 #0
> [ 13.375007] Hardware name: BCM5301X
> [ 13.378496] Backtrace:
> [ 13.380943] Function entered at [<c0105ccc>] from [<c0105fb4>]
> [ 13.386787] r7:00000000 r6:60000013 r5:00000000 r4:c081d988
> [ 13.392450] Function entered at [<c0105f9c>] from [<c04f29a8>]
> [ 13.398291] Function entered at [<c04f2918>] from [<c037ca0c>]
> [ 13.404133] r7:00000000 r6:00000040 r5:c7954000 r4:ffffffb6
> [ 13.409797] Function entered at [<c037c7dc>] from [<c037cd1c>]
> [ 13.415641] r10:00000000 r9:00000040 r8:00000072 r7:c7954000 r6:c7979000 r5:c7036180
> [ 13.423488] r4:c7b72900
> [ 13.426021] Function entered at [<c037cca4>] from [<c0381c5c>]
> [ 13.431865] r10:00000000 r9:c7979800 r8:c7954000 r7:c7979000 r6:00000072 r5:c7036180
> [ 13.439704] r4:c7b72900
> [ 13.442237] Function entered at [<c0381a84>] from [<c0376d74>]
> [ 13.448081] r10:c7954040 r9:00000840 r8:c702e400 r7:00000000 r6:c702e400 r5:c7954000
> [ 13.455928] r4:fffff800
> [ 13.458461] Function entered at [<c0376720>] from [<c0717b9c>]
> [ 13.464305] r10:c0813a88 r9:c0651c18 r8:c0651bec r7:c084ff48 r6:c081e440 r5:c7823ea4
> [ 13.472152] r4:c702e400
> [ 13.474685] Function entered at [<c0717954>] from [<c0101a8c>]
> [ 13.480529] r10:c072e83c r9:c07366b8 r8:c0717954 r7:c072e838 r6:c081e440 r5:00000000
> [ 13.488376] r4:c0803c08
> [ 13.490909] Function entered at [<c01019dc>] from [<c0700e38>]
> [ 13.496754] r9:c07366b8 r8:c0700594 r7:c072e838 r6:c081e440 r5:c081e440 r4:00000008
> [ 13.504514] Function entered at [<c0700cf8>] from [<c0506adc>]
> [ 13.510358] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0506acc
> [ 13.518197] r4:00000000
> [ 13.520730] Function entered at [<c0506acc>] from [<c0102788>]
> [ 13.526570] r5:c0506acc r4:00000000
> [ 13.530863] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read only 64 bytes, retry
> [ 13.542763] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read only 64 bytes, retry
> [ 13.554659] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read only 64 bytes, retry
> [ 13.566548] ubi0 error: 0xc037ca08: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read 64 bytes
> [ 13.576574] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.25 #0
> [ 13.582589] Hardware name: BCM5301X
> [ 13.586078] Backtrace:
> [ 13.588526] Function entered at [<c0105ccc>] from [<c0105fb4>]
> [ 13.594368] r7:00000000 r6:60000013 r5:00000000 r4:c081d988
> [ 13.600032] Function entered at [<c0105f9c>] from [<c04f29a8>]
> [ 13.605872] Function entered at [<c04f2918>] from [<c037ca0c>]
> [ 13.611714] r7:00000000 r6:00000040 r5:c7954000 r4:ffffffb6
> [ 13.617378] Function entered at [<c037c7dc>] from [<c037cd1c>]
> [ 13.623223] r10:00000000 r9:00000040 r8:00000073 r7:c7954000 r6:c7979000 r5:c7036180
> [ 13.631071] r4:c7b72900
> [ 13.633604] Function entered at [<c037cca4>] from [<c0381c5c>]
> [ 13.639447] r10:00000000 r9:c7979800 r8:c7954000 r7:c7979000 r6:00000073 r5:c7036180
> [ 13.647286] r4:c7b72900
> [ 13.649819] Function entered at [<c0381a84>] from [<c0376d74>]
> [ 13.655663] r10:c7954040 r9:00000840 r8:c702e400 r7:00000000 r6:c702e400 r5:c7954000
> [ 13.663510] r4:fffff800
> [ 13.666042] Function entered at [<c0376720>] from [<c0717b9c>]
> [ 13.671886] r10:c0813a88 r9:c0651c18 r8:c0651bec r7:c084ff48 r6:c081e440 r5:c7823ea4
> [ 13.679725] r4:c702e400
> [ 13.682258] Function entered at [<c0717954>] from [<c0101a8c>]
> [ 13.688103] r10:c072e83c r9:c07366b8 r8:c0717954 r7:c072e838 r6:c081e440 r5:00000000
> [ 13.695949] r4:c0803c08
> [ 13.698482] Function entered at [<c01019dc>] from [<c0700e38>]
> [ 13.704327] r9:c07366b8 r8:c0700594 r7:c072e838 r6:c081e440 r5:c081e440 r4:00000008
> [ 13.712087] Function entered at [<c0700cf8>] from [<c0506adc>]
> [ 13.717930] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0506acc
> [ 13.725769] r4:00000000
> [ 13.728303] Function entered at [<c0506acc>] from [<c0102788>]
> [ 13.734144] r5:c0506acc r4:00000000
> [ 13.738425] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 116:0, read only 64 bytes, retry
> [ 13.750319] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 116:0, read only 64 bytes, retry
> [ 13.762213] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 116:0, read only 64 bytes, retry
> [ 13.774103] ubi0 error: 0xc037ca08: error -74 (ECC error) while reading 64 bytes from PEB 116:0, read 64 bytes
> [ 13.784130] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.25 #0
This is expected if you previously were using firmware programming flash
in non-BCH8 mode. The main reason for what you're seeing is that when
flashing image with CFE it doesn't erase all NAND pages.
If previously you were using firmware programming flash in BCH1 mode, it
means that after flashing firmware using BCH8 you'll end up with mess in
ECC.
Part of NAND flash programmed by CFE will use BCH8.
Part of NAND flash that remained from previous fw will use BCH1.
Linux will fail to read part of NAND flash from prev installation.
The cleanest solution: erase all NAND content of firmware partition
before flashing firmware using BCH8.
The easiest solution: ignore all these "error -74 (ECC error) while
reading" errors (they may last for few minutes!). I believe UBI should
simply recreate all pages it couldn't access and once you wait long
enough, all your NAND flash will be using BCH8.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH] ARM: BCM5301X: Fix NAND ECC parameters for Linksys Panamera
@ 2018-04-25 9:02 ` Rafał Miłecki
0 siblings, 0 replies; 22+ messages in thread
From: Rafał Miłecki @ 2018-04-25 9:02 UTC (permalink / raw)
To: linux-arm-kernel
On 13.03.2018 02:02, Vivek Unune wrote:
> On Mon, Mar 12, 2018 at 03:52:27PM -0700, Florian Fainelli wrote:
>> On 03/11/2018 03:03 AM, Vivek Unune wrote:
>>> Hi Rafa?,
>>>
>>> On Sat, Mar 10, 2018 at 10:41:04PM +0100, Rafa? Mi?ecki wrote:
>>>> On 10 March 2018 at 18:12, Vivek Unune <npcomplete13@gmail.com> wrote:
>>>>> Using BCH8 gives ecc errors and makes the router unsuable.
>>>>> Switching to BCH1 fixes these errors.
>>>>
>>>> Can you provide CFE's log messages starting with
>>>> "Decompressing...done" and up to the "Press Ctrl+C to stop in CFE"
>>>> please? I'd like to see what NAND info CFE prints there.
>>>
>>> See below. It does say BCH-8, however I can't get it to work.
>>>
>>> CFE log:
>>>
>>> Decompressing...done
>>> Found a Toshiba NAND flash:
>>> Total size: 128MB
>>> Block size: 128KB
>>> Page Size: 2048B
>>> OOB Size: 64B
>>> Sector size: 512B
>>> Spare size: 16B
>>> ECC level: 8 (8-bit)
>>> Device ID: 0x98 0xf1 0x80 0x15 0xf2 0x16
>>> find_devinfo: devinfo block found at 0x00180000!
>>>
>>> Press Ctrl+C to stop in CFE
>>
>> What kind of error are you getting in Linux with BCH-8?
>
> See below:
>
> [ 12.941850] Generic PHY dsa-1.0:03: attached PHY driver [Generic PHY] (mii_bus:phy_addr=dsa-1.0:03, irq=POLL)
> [ 12.991851] Generic PHY dsa-1.0:04: attached PHY driver [Generic PHY] (mii_bus:phy_addr=dsa-1.0:04, irq=POLL)
> [ 13.032404] UBI: auto-attach mtd5
> [ 13.035731] ubi0: attaching mtd5
> [ 13.115701] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 113:0, read only 64 bytes, retry
> [ 13.127630] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 113:0, read only 64 bytes, retry
> [ 13.139524] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 113:0, read only 64 bytes, retry
> [ 13.151419] ubi0 error: 0xc037ca08: error -74 (ECC error) while reading 64 bytes from PEB 113:0, read 64 bytes
> [ 13.161448] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.14.25 #0
> [ 13.167460] Hardware name: BCM5301X
> [ 13.170951] Backtrace:
> [ 13.173398] Function entered at [<c0105ccc>] from [<c0105fb4>]
> [ 13.179240] r7:00000000 r6:60000013 r5:00000000 r4:c081d988
> [ 13.184903] Function entered at [<c0105f9c>] from [<c04f29a8>]
> [ 13.190744] Function entered at [<c04f2918>] from [<c037ca0c>]
> [ 13.196586] r7:00000000 r6:00000040 r5:c7954000 r4:ffffffb6
> [ 13.202251] Function entered at [<c037c7dc>] from [<c037cd1c>]
> [ 13.208095] r10:00000000 r9:00000040 r8:00000071 r7:c7954000 r6:c7979000 r5:c7036180
> [ 13.215941] r4:c7b72900
> [ 13.218475] Function entered at [<c037cca4>] from [<c0381c5c>]
> [ 13.224318] r10:00000000 r9:c7979800 r8:c7954000 r7:c7979000 r6:00000071 r5:c7036180
> [ 13.232157] r4:c7b72900
> [ 13.234690] Function entered at [<c0381a84>] from [<c0376d74>]
> [ 13.240534] r10:c7954040 r9:00000840 r8:c702e400 r7:00000000 r6:c702e400 r5:c7954000
> [ 13.248381] r4:fffff800
> [ 13.250914] Function entered at [<c0376720>] from [<c0717b9c>]
> [ 13.256759] r10:c0813a88 r9:c0651c18 r8:c0651bec r7:c084ff48 r6:c081e440 r5:c7823ea4
> [ 13.264605] r4:c702e400
> [ 13.267139] Function entered at [<c0717954>] from [<c0101a8c>]
> [ 13.272983] r10:c072e83c r9:c07366b8 r8:c0717954 r7:c072e838 r6:c081e440 r5:00000000
> [ 13.280830] r4:c0803c08
> [ 13.283363] Function entered at [<c01019dc>] from [<c0700e38>]
> [ 13.289206] r9:c07366b8 r8:c0700594 r7:c072e838 r6:c081e440 r5:c081e440 r4:00000008
> [ 13.296958] Function entered at [<c0700cf8>] from [<c0506adc>]
> [ 13.302802] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0506acc
> [ 13.310641] r4:00000000
> [ 13.313175] Function entered at [<c0506acc>] from [<c0102788>]
> [ 13.319015] r5:c0506acc r4:00000000
> [ 13.323289] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 114:0, read only 64 bytes, retry
> [ 13.335178] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 114:0, read only 64 bytes, retry
> [ 13.347066] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 114:0, read only 64 bytes, retry
> [ 13.358956] ubi0 error: 0xc037ca08: error -74 (ECC error) while reading 64 bytes from PEB 114:0, read 64 bytes
> [ 13.368989] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.14.25 #0
> [ 13.375007] Hardware name: BCM5301X
> [ 13.378496] Backtrace:
> [ 13.380943] Function entered at [<c0105ccc>] from [<c0105fb4>]
> [ 13.386787] r7:00000000 r6:60000013 r5:00000000 r4:c081d988
> [ 13.392450] Function entered at [<c0105f9c>] from [<c04f29a8>]
> [ 13.398291] Function entered at [<c04f2918>] from [<c037ca0c>]
> [ 13.404133] r7:00000000 r6:00000040 r5:c7954000 r4:ffffffb6
> [ 13.409797] Function entered at [<c037c7dc>] from [<c037cd1c>]
> [ 13.415641] r10:00000000 r9:00000040 r8:00000072 r7:c7954000 r6:c7979000 r5:c7036180
> [ 13.423488] r4:c7b72900
> [ 13.426021] Function entered at [<c037cca4>] from [<c0381c5c>]
> [ 13.431865] r10:00000000 r9:c7979800 r8:c7954000 r7:c7979000 r6:00000072 r5:c7036180
> [ 13.439704] r4:c7b72900
> [ 13.442237] Function entered at [<c0381a84>] from [<c0376d74>]
> [ 13.448081] r10:c7954040 r9:00000840 r8:c702e400 r7:00000000 r6:c702e400 r5:c7954000
> [ 13.455928] r4:fffff800
> [ 13.458461] Function entered at [<c0376720>] from [<c0717b9c>]
> [ 13.464305] r10:c0813a88 r9:c0651c18 r8:c0651bec r7:c084ff48 r6:c081e440 r5:c7823ea4
> [ 13.472152] r4:c702e400
> [ 13.474685] Function entered at [<c0717954>] from [<c0101a8c>]
> [ 13.480529] r10:c072e83c r9:c07366b8 r8:c0717954 r7:c072e838 r6:c081e440 r5:00000000
> [ 13.488376] r4:c0803c08
> [ 13.490909] Function entered at [<c01019dc>] from [<c0700e38>]
> [ 13.496754] r9:c07366b8 r8:c0700594 r7:c072e838 r6:c081e440 r5:c081e440 r4:00000008
> [ 13.504514] Function entered at [<c0700cf8>] from [<c0506adc>]
> [ 13.510358] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0506acc
> [ 13.518197] r4:00000000
> [ 13.520730] Function entered at [<c0506acc>] from [<c0102788>]
> [ 13.526570] r5:c0506acc r4:00000000
> [ 13.530863] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read only 64 bytes, retry
> [ 13.542763] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read only 64 bytes, retry
> [ 13.554659] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read only 64 bytes, retry
> [ 13.566548] ubi0 error: 0xc037ca08: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read 64 bytes
> [ 13.576574] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.25 #0
> [ 13.582589] Hardware name: BCM5301X
> [ 13.586078] Backtrace:
> [ 13.588526] Function entered at [<c0105ccc>] from [<c0105fb4>]
> [ 13.594368] r7:00000000 r6:60000013 r5:00000000 r4:c081d988
> [ 13.600032] Function entered at [<c0105f9c>] from [<c04f29a8>]
> [ 13.605872] Function entered at [<c04f2918>] from [<c037ca0c>]
> [ 13.611714] r7:00000000 r6:00000040 r5:c7954000 r4:ffffffb6
> [ 13.617378] Function entered at [<c037c7dc>] from [<c037cd1c>]
> [ 13.623223] r10:00000000 r9:00000040 r8:00000073 r7:c7954000 r6:c7979000 r5:c7036180
> [ 13.631071] r4:c7b72900
> [ 13.633604] Function entered at [<c037cca4>] from [<c0381c5c>]
> [ 13.639447] r10:00000000 r9:c7979800 r8:c7954000 r7:c7979000 r6:00000073 r5:c7036180
> [ 13.647286] r4:c7b72900
> [ 13.649819] Function entered at [<c0381a84>] from [<c0376d74>]
> [ 13.655663] r10:c7954040 r9:00000840 r8:c702e400 r7:00000000 r6:c702e400 r5:c7954000
> [ 13.663510] r4:fffff800
> [ 13.666042] Function entered at [<c0376720>] from [<c0717b9c>]
> [ 13.671886] r10:c0813a88 r9:c0651c18 r8:c0651bec r7:c084ff48 r6:c081e440 r5:c7823ea4
> [ 13.679725] r4:c702e400
> [ 13.682258] Function entered at [<c0717954>] from [<c0101a8c>]
> [ 13.688103] r10:c072e83c r9:c07366b8 r8:c0717954 r7:c072e838 r6:c081e440 r5:00000000
> [ 13.695949] r4:c0803c08
> [ 13.698482] Function entered at [<c01019dc>] from [<c0700e38>]
> [ 13.704327] r9:c07366b8 r8:c0700594 r7:c072e838 r6:c081e440 r5:c081e440 r4:00000008
> [ 13.712087] Function entered at [<c0700cf8>] from [<c0506adc>]
> [ 13.717930] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0506acc
> [ 13.725769] r4:00000000
> [ 13.728303] Function entered at [<c0506acc>] from [<c0102788>]
> [ 13.734144] r5:c0506acc r4:00000000
> [ 13.738425] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 116:0, read only 64 bytes, retry
> [ 13.750319] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 116:0, read only 64 bytes, retry
> [ 13.762213] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 116:0, read only 64 bytes, retry
> [ 13.774103] ubi0 error: 0xc037ca08: error -74 (ECC error) while reading 64 bytes from PEB 116:0, read 64 bytes
> [ 13.784130] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.25 #0
This is expected if you previously were using firmware programming flash
in non-BCH8 mode. The main reason for what you're seeing is that when
flashing image with CFE it doesn't erase all NAND pages.
If previously you were using firmware programming flash in BCH1 mode, it
means that after flashing firmware using BCH8 you'll end up with mess in
ECC.
Part of NAND flash programmed by CFE will use BCH8.
Part of NAND flash that remained from previous fw will use BCH1.
Linux will fail to read part of NAND flash from prev installation.
The cleanest solution: erase all NAND content of firmware partition
before flashing firmware using BCH8.
The easiest solution: ignore all these "error -74 (ECC error) while
reading" errors (they may last for few minutes!). I believe UBI should
simply recreate all pages it couldn't access and once you wait long
enough, all your NAND flash will be using BCH8.
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] ARM: BCM5301X: Fix NAND ECC parameters for Linksys Panamera
2018-04-25 9:02 ` Rafał Miłecki
(?)
@ 2018-04-27 14:05 ` Vivek Unune
-1 siblings, 0 replies; 22+ messages in thread
From: Vivek Unune @ 2018-04-27 14:05 UTC (permalink / raw)
To: Rafał Miłecki
Cc: Florian Fainelli, Hauke Mehrtens, Jon Mason,
bcm-kernel-feedback-list, Rob Herring, Mark Rutland,
Russell King, linux-arm-kernel, devicetree,
Linux Kernel Mailing List
On Wed, Apr 25, 2018 at 11:02:04AM +0200, Rafał Miłecki wrote:
> > [ 13.530863] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read only 64 bytes, retry
> > [ 13.542763] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read only 64 bytes, retry
> > [ 13.554659] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read only 64 bytes, retry
> > [ 13.566548] ubi0 error: 0xc037ca08: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read 64 bytes
> > [ 13.576574] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.25 #0
> > [ 13.582589] Hardware name: BCM5301X
> > [ 13.586078] Backtrace:
> > [ 13.588526] Function entered at [<c0105ccc>] from [<c0105fb4>]
> > [ 13.594368] r7:00000000 r6:60000013 r5:00000000 r4:c081d988
> > [ 13.600032] Function entered at [<c0105f9c>] from [<c04f29a8>]
> > [ 13.605872] Function entered at [<c04f2918>] from [<c037ca0c>]
> > [ 13.611714] r7:00000000 r6:00000040 r5:c7954000 r4:ffffffb6
> > [ 13.617378] Function entered at [<c037c7dc>] from [<c037cd1c>]
> > [ 13.623223] r10:00000000 r9:00000040 r8:00000073 r7:c7954000 r6:c7979000 r5:c7036180
> > [ 13.631071] r4:c7b72900
> > [ 13.633604] Function entered at [<c037cca4>] from [<c0381c5c>]
> > [ 13.639447] r10:00000000 r9:c7979800 r8:c7954000 r7:c7979000 r6:00000073 r5:c7036180
> > [ 13.647286] r4:c7b72900
> > [ 13.649819] Function entered at [<c0381a84>] from [<c0376d74>]
> > [ 13.655663] r10:c7954040 r9:00000840 r8:c702e400 r7:00000000 r6:c702e400 r5:c7954000
> > [ 13.663510] r4:fffff800
> > [ 13.666042] Function entered at [<c0376720>] from [<c0717b9c>]
> > [ 13.671886] r10:c0813a88 r9:c0651c18 r8:c0651bec r7:c084ff48 r6:c081e440 r5:c7823ea4
> > [ 13.679725] r4:c702e400
> > [ 13.682258] Function entered at [<c0717954>] from [<c0101a8c>]
> > [ 13.688103] r10:c072e83c r9:c07366b8 r8:c0717954 r7:c072e838 r6:c081e440 r5:00000000
> > [ 13.695949] r4:c0803c08
> > [ 13.698482] Function entered at [<c01019dc>] from [<c0700e38>]
> > [ 13.704327] r9:c07366b8 r8:c0700594 r7:c072e838 r6:c081e440 r5:c081e440 r4:00000008
> > [ 13.712087] Function entered at [<c0700cf8>] from [<c0506adc>]
> > [ 13.717930] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0506acc
> > [ 13.725769] r4:00000000
> > [ 13.728303] Function entered at [<c0506acc>] from [<c0102788>]
> > [ 13.734144] r5:c0506acc r4:00000000
>
> This is expected if you previously were using firmware programming flash
> in non-BCH8 mode. The main reason for what you're seeing is that when
> flashing image with CFE it doesn't erase all NAND pages.
>
> If previously you were using firmware programming flash in BCH1 mode, it
> means that after flashing firmware using BCH8 you'll end up with mess in
> ECC.
>
> Part of NAND flash programmed by CFE will use BCH8.
> Part of NAND flash that remained from previous fw will use BCH1.
> Linux will fail to read part of NAND flash from prev installation.
>
> The cleanest solution: erase all NAND content of firmware partition
> before flashing firmware using BCH8.
>
> The easiest solution: ignore all these "error -74 (ECC error) while
> reading" errors (they may last for few minutes!). I believe UBI should
> simply recreate all pages it couldn't access and once you wait long
> enough, all your NAND flash will be using BCH8.
Let me build the firmware with BCH-8 and wait it out. I'll report back my
results.
Thanks,
Vivek
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] ARM: BCM5301X: Fix NAND ECC parameters for Linksys Panamera
@ 2018-04-27 14:05 ` Vivek Unune
0 siblings, 0 replies; 22+ messages in thread
From: Vivek Unune @ 2018-04-27 14:05 UTC (permalink / raw)
To: Rafał Miłecki
Cc: Mark Rutland, devicetree, Florian Fainelli, Jon Mason,
Hauke Mehrtens, Russell King, Linux Kernel Mailing List,
Rob Herring, bcm-kernel-feedback-list, linux-arm-kernel
On Wed, Apr 25, 2018 at 11:02:04AM +0200, Rafał Miłecki wrote:
> > [ 13.530863] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read only 64 bytes, retry
> > [ 13.542763] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read only 64 bytes, retry
> > [ 13.554659] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read only 64 bytes, retry
> > [ 13.566548] ubi0 error: 0xc037ca08: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read 64 bytes
> > [ 13.576574] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.25 #0
> > [ 13.582589] Hardware name: BCM5301X
> > [ 13.586078] Backtrace:
> > [ 13.588526] Function entered at [<c0105ccc>] from [<c0105fb4>]
> > [ 13.594368] r7:00000000 r6:60000013 r5:00000000 r4:c081d988
> > [ 13.600032] Function entered at [<c0105f9c>] from [<c04f29a8>]
> > [ 13.605872] Function entered at [<c04f2918>] from [<c037ca0c>]
> > [ 13.611714] r7:00000000 r6:00000040 r5:c7954000 r4:ffffffb6
> > [ 13.617378] Function entered at [<c037c7dc>] from [<c037cd1c>]
> > [ 13.623223] r10:00000000 r9:00000040 r8:00000073 r7:c7954000 r6:c7979000 r5:c7036180
> > [ 13.631071] r4:c7b72900
> > [ 13.633604] Function entered at [<c037cca4>] from [<c0381c5c>]
> > [ 13.639447] r10:00000000 r9:c7979800 r8:c7954000 r7:c7979000 r6:00000073 r5:c7036180
> > [ 13.647286] r4:c7b72900
> > [ 13.649819] Function entered at [<c0381a84>] from [<c0376d74>]
> > [ 13.655663] r10:c7954040 r9:00000840 r8:c702e400 r7:00000000 r6:c702e400 r5:c7954000
> > [ 13.663510] r4:fffff800
> > [ 13.666042] Function entered at [<c0376720>] from [<c0717b9c>]
> > [ 13.671886] r10:c0813a88 r9:c0651c18 r8:c0651bec r7:c084ff48 r6:c081e440 r5:c7823ea4
> > [ 13.679725] r4:c702e400
> > [ 13.682258] Function entered at [<c0717954>] from [<c0101a8c>]
> > [ 13.688103] r10:c072e83c r9:c07366b8 r8:c0717954 r7:c072e838 r6:c081e440 r5:00000000
> > [ 13.695949] r4:c0803c08
> > [ 13.698482] Function entered at [<c01019dc>] from [<c0700e38>]
> > [ 13.704327] r9:c07366b8 r8:c0700594 r7:c072e838 r6:c081e440 r5:c081e440 r4:00000008
> > [ 13.712087] Function entered at [<c0700cf8>] from [<c0506adc>]
> > [ 13.717930] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0506acc
> > [ 13.725769] r4:00000000
> > [ 13.728303] Function entered at [<c0506acc>] from [<c0102788>]
> > [ 13.734144] r5:c0506acc r4:00000000
>
> This is expected if you previously were using firmware programming flash
> in non-BCH8 mode. The main reason for what you're seeing is that when
> flashing image with CFE it doesn't erase all NAND pages.
>
> If previously you were using firmware programming flash in BCH1 mode, it
> means that after flashing firmware using BCH8 you'll end up with mess in
> ECC.
>
> Part of NAND flash programmed by CFE will use BCH8.
> Part of NAND flash that remained from previous fw will use BCH1.
> Linux will fail to read part of NAND flash from prev installation.
>
> The cleanest solution: erase all NAND content of firmware partition
> before flashing firmware using BCH8.
>
> The easiest solution: ignore all these "error -74 (ECC error) while
> reading" errors (they may last for few minutes!). I believe UBI should
> simply recreate all pages it couldn't access and once you wait long
> enough, all your NAND flash will be using BCH8.
Let me build the firmware with BCH-8 and wait it out. I'll report back my
results.
Thanks,
Vivek
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH] ARM: BCM5301X: Fix NAND ECC parameters for Linksys Panamera
@ 2018-04-27 14:05 ` Vivek Unune
0 siblings, 0 replies; 22+ messages in thread
From: Vivek Unune @ 2018-04-27 14:05 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Apr 25, 2018 at 11:02:04AM +0200, Rafa? Mi?ecki wrote:
> > [ 13.530863] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read only 64 bytes, retry
> > [ 13.542763] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read only 64 bytes, retry
> > [ 13.554659] ubi0 warning: 0xc037c9e4: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read only 64 bytes, retry
> > [ 13.566548] ubi0 error: 0xc037ca08: error -74 (ECC error) while reading 64 bytes from PEB 115:0, read 64 bytes
> > [ 13.576574] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.25 #0
> > [ 13.582589] Hardware name: BCM5301X
> > [ 13.586078] Backtrace:
> > [ 13.588526] Function entered at [<c0105ccc>] from [<c0105fb4>]
> > [ 13.594368] r7:00000000 r6:60000013 r5:00000000 r4:c081d988
> > [ 13.600032] Function entered at [<c0105f9c>] from [<c04f29a8>]
> > [ 13.605872] Function entered at [<c04f2918>] from [<c037ca0c>]
> > [ 13.611714] r7:00000000 r6:00000040 r5:c7954000 r4:ffffffb6
> > [ 13.617378] Function entered at [<c037c7dc>] from [<c037cd1c>]
> > [ 13.623223] r10:00000000 r9:00000040 r8:00000073 r7:c7954000 r6:c7979000 r5:c7036180
> > [ 13.631071] r4:c7b72900
> > [ 13.633604] Function entered at [<c037cca4>] from [<c0381c5c>]
> > [ 13.639447] r10:00000000 r9:c7979800 r8:c7954000 r7:c7979000 r6:00000073 r5:c7036180
> > [ 13.647286] r4:c7b72900
> > [ 13.649819] Function entered at [<c0381a84>] from [<c0376d74>]
> > [ 13.655663] r10:c7954040 r9:00000840 r8:c702e400 r7:00000000 r6:c702e400 r5:c7954000
> > [ 13.663510] r4:fffff800
> > [ 13.666042] Function entered at [<c0376720>] from [<c0717b9c>]
> > [ 13.671886] r10:c0813a88 r9:c0651c18 r8:c0651bec r7:c084ff48 r6:c081e440 r5:c7823ea4
> > [ 13.679725] r4:c702e400
> > [ 13.682258] Function entered at [<c0717954>] from [<c0101a8c>]
> > [ 13.688103] r10:c072e83c r9:c07366b8 r8:c0717954 r7:c072e838 r6:c081e440 r5:00000000
> > [ 13.695949] r4:c0803c08
> > [ 13.698482] Function entered at [<c01019dc>] from [<c0700e38>]
> > [ 13.704327] r9:c07366b8 r8:c0700594 r7:c072e838 r6:c081e440 r5:c081e440 r4:00000008
> > [ 13.712087] Function entered at [<c0700cf8>] from [<c0506adc>]
> > [ 13.717930] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0506acc
> > [ 13.725769] r4:00000000
> > [ 13.728303] Function entered at [<c0506acc>] from [<c0102788>]
> > [ 13.734144] r5:c0506acc r4:00000000
>
> This is expected if you previously were using firmware programming flash
> in non-BCH8 mode. The main reason for what you're seeing is that when
> flashing image with CFE it doesn't erase all NAND pages.
>
> If previously you were using firmware programming flash in BCH1 mode, it
> means that after flashing firmware using BCH8 you'll end up with mess in
> ECC.
>
> Part of NAND flash programmed by CFE will use BCH8.
> Part of NAND flash that remained from previous fw will use BCH1.
> Linux will fail to read part of NAND flash from prev installation.
>
> The cleanest solution: erase all NAND content of firmware partition
> before flashing firmware using BCH8.
>
> The easiest solution: ignore all these "error -74 (ECC error) while
> reading" errors (they may last for few minutes!). I believe UBI should
> simply recreate all pages it couldn't access and once you wait long
> enough, all your NAND flash will be using BCH8.
Let me build the firmware with BCH-8 and wait it out. I'll report back my
results.
Thanks,
Vivek
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] ARM: BCM5301X: Fix NAND ECC parameters for Linksys Panamera
2018-04-27 14:05 ` Vivek Unune
@ 2018-04-28 4:19 ` Vivek Unune
-1 siblings, 0 replies; 22+ messages in thread
From: Vivek Unune @ 2018-04-28 4:19 UTC (permalink / raw)
To: Rafał Miłecki
Cc: Florian Fainelli, Hauke Mehrtens, Jon Mason,
bcm-kernel-feedback-list, Rob Herring, Mark Rutland,
Russell King, linux-arm-kernel, devicetree,
Linux Kernel Mailing List
On Fri, Apr 27, 2018 at 10:05 AM, Vivek Unune <npcomplete13@gmail.com> wrote:
> On Wed, Apr 25, 2018 at 11:02:04AM +0200, Rafał Miłecki wrote:
>>
>> The easiest solution: ignore all these "error -74 (ECC error) while
>> reading" errors (they may last for few minutes!). I believe UBI should
>> simply recreate all pages it couldn't access and once you wait long
>> enough, all your NAND flash will be using BCH8.
>
> Let me build the firmware with BCH-8 and wait it out. I'll report back my
> results.
I can confirm that BCH-8 indeed works after letting it run through those
ECC errors.
Thanks!
Vivek
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH] ARM: BCM5301X: Fix NAND ECC parameters for Linksys Panamera
@ 2018-04-28 4:19 ` Vivek Unune
0 siblings, 0 replies; 22+ messages in thread
From: Vivek Unune @ 2018-04-28 4:19 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Apr 27, 2018 at 10:05 AM, Vivek Unune <npcomplete13@gmail.com> wrote:
> On Wed, Apr 25, 2018 at 11:02:04AM +0200, Rafa? Mi?ecki wrote:
>>
>> The easiest solution: ignore all these "error -74 (ECC error) while
>> reading" errors (they may last for few minutes!). I believe UBI should
>> simply recreate all pages it couldn't access and once you wait long
>> enough, all your NAND flash will be using BCH8.
>
> Let me build the firmware with BCH-8 and wait it out. I'll report back my
> results.
I can confirm that BCH-8 indeed works after letting it run through those
ECC errors.
Thanks!
Vivek
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH] ARM: BCM5301X: Fix NAND ECC parameters for Linksys Panamera
2018-04-28 4:19 ` Vivek Unune
@ 2018-04-28 6:44 ` Rafał Miłecki
-1 siblings, 0 replies; 22+ messages in thread
From: Rafał Miłecki @ 2018-04-28 6:44 UTC (permalink / raw)
To: Vivek Unune
Cc: Florian Fainelli, Hauke Mehrtens, Jon Mason,
bcm-kernel-feedback-list, Rob Herring, Mark Rutland,
Russell King, linux-arm-kernel, devicetree,
Linux Kernel Mailing List
On 28 April 2018 at 06:19, Vivek Unune <npcomplete13@gmail.com> wrote:
> On Fri, Apr 27, 2018 at 10:05 AM, Vivek Unune <npcomplete13@gmail.com> wrote:
>> On Wed, Apr 25, 2018 at 11:02:04AM +0200, Rafał Miłecki wrote:
>>>
>>> The easiest solution: ignore all these "error -74 (ECC error) while
>>> reading" errors (they may last for few minutes!). I believe UBI should
>>> simply recreate all pages it couldn't access and once you wait long
>>> enough, all your NAND flash will be using BCH8.
>>
>> Let me build the firmware with BCH-8 and wait it out. I'll report back my
>> results.
>
> I can confirm that BCH-8 indeed works after letting it run through those
> ECC errors.
>
> Thanks!
Great, thanks! That controller behavior (reading BCH8 fine while
working in BCH4 mode) is really confusing.
--
Rafał
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH] ARM: BCM5301X: Fix NAND ECC parameters for Linksys Panamera
@ 2018-04-28 6:44 ` Rafał Miłecki
0 siblings, 0 replies; 22+ messages in thread
From: Rafał Miłecki @ 2018-04-28 6:44 UTC (permalink / raw)
To: linux-arm-kernel
On 28 April 2018 at 06:19, Vivek Unune <npcomplete13@gmail.com> wrote:
> On Fri, Apr 27, 2018 at 10:05 AM, Vivek Unune <npcomplete13@gmail.com> wrote:
>> On Wed, Apr 25, 2018 at 11:02:04AM +0200, Rafa? Mi?ecki wrote:
>>>
>>> The easiest solution: ignore all these "error -74 (ECC error) while
>>> reading" errors (they may last for few minutes!). I believe UBI should
>>> simply recreate all pages it couldn't access and once you wait long
>>> enough, all your NAND flash will be using BCH8.
>>
>> Let me build the firmware with BCH-8 and wait it out. I'll report back my
>> results.
>
> I can confirm that BCH-8 indeed works after letting it run through those
> ECC errors.
>
> Thanks!
Great, thanks! That controller behavior (reading BCH8 fine while
working in BCH4 mode) is really confusing.
--
Rafa?
^ permalink raw reply [flat|nested] 22+ messages in thread
end of thread, other threads:[~2018-04-28 6:44 UTC | newest]
Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-03-10 17:12 [PATCH] ARM: BCM5301X: Fix NAND ECC parameters for Linksys Panamera Vivek Unune
2018-03-10 17:12 ` Vivek Unune
2018-03-10 21:41 ` Rafał Miłecki
2018-03-10 21:41 ` Rafał Miłecki
2018-03-11 10:03 ` Vivek Unune
2018-03-11 10:03 ` Vivek Unune
2018-03-12 22:52 ` Florian Fainelli
2018-03-12 22:52 ` Florian Fainelli
2018-03-13 1:02 ` Vivek Unune
2018-03-13 1:02 ` Vivek Unune
2018-04-25 9:02 ` Rafał Miłecki
2018-04-25 9:02 ` Rafał Miłecki
2018-04-25 9:02 ` Rafał Miłecki
2018-04-27 14:05 ` Vivek Unune
2018-04-27 14:05 ` Vivek Unune
2018-04-27 14:05 ` Vivek Unune
2018-04-28 4:19 ` Vivek Unune
2018-04-28 4:19 ` Vivek Unune
2018-04-28 6:44 ` Rafał Miłecki
2018-04-28 6:44 ` Rafał Miłecki
2018-04-25 8:51 ` Rafał Miłecki
2018-04-25 8:51 ` Rafał Miłecki
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.