* [ath9k-devel] ath9k disconnects (ath: Failed to stop TX DMA!)
@ 2011-12-17 14:34 Mieszko Ślusarczyk
2011-12-18 10:36 ` Adrian Chadd
0 siblings, 1 reply; 4+ messages in thread
From: Mieszko Ślusarczyk @ 2011-12-17 14:34 UTC (permalink / raw)
To: ath9k-devel
Hi,
I'm having problems with TP-LINK TL-WN851ND,
after 3-5 minutes of "heavy" load (hostapd offers 130mbit/s, physically I get ~7.1MBytes/s) I get:
`
Dec 15 15:15:40 spitfire-ipfire1 kernel: ath: Failed to stop TX DMA!
Dec 15 15:15:40 spitfire-ipfire1 kernel: ath: Failed to stop TX DMA!
Dec 15 15:15:40 spitfire-ipfire1 kernel: ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026040
Dec 15 15:15:40 spitfire-ipfire1 kernel: ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
Dec 15 15:15:40 spitfire-ipfire1 kernel: ath: Failed to stop TX DMA!
Dec 15 15:15:40 spitfire-ipfire1 kernel: ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006040
Dec 15 15:15:40 spitfire-ipfire1 kernel: ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
and so on.
Ive tried compat-wireless 3.1.1-1 and 3.2_rc1-1
lspci
00:14.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (rev 01)
lspci -n
Code:
00:14.0 0280: 168c:002d (rev 01)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20111217/8153d0e7/attachment.htm
^ permalink raw reply [flat|nested] 4+ messages in thread
* [ath9k-devel] ath9k disconnects (ath: Failed to stop TX DMA!)
2011-12-17 14:34 [ath9k-devel] ath9k disconnects (ath: Failed to stop TX DMA!) Mieszko Ślusarczyk
@ 2011-12-18 10:36 ` Adrian Chadd
2011-12-19 13:15 ` Mohammed Shafi
0 siblings, 1 reply; 4+ messages in thread
From: Adrian Chadd @ 2011-12-18 10:36 UTC (permalink / raw)
To: ath9k-devel
Can you try a previous kernel + compat wireless version? say something
2.6.30ish?
(Just in case this is a regression.)
Adrian
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20111218/656f6a73/attachment.htm
^ permalink raw reply [flat|nested] 4+ messages in thread
* [ath9k-devel] ath9k disconnects (ath: Failed to stop TX DMA!)
2011-12-18 10:36 ` Adrian Chadd
@ 2011-12-19 13:15 ` Mohammed Shafi
0 siblings, 0 replies; 4+ messages in thread
From: Mohammed Shafi @ 2011-12-19 13:15 UTC (permalink / raw)
To: ath9k-devel
2011/12/18 Adrian Chadd <adrian@freebsd.org>:
> Can you try a previous kernel + compat wireless version? say something
> 2.6.30ish?
may we should try
http://linuxwireless.org/en/users/Download/stable/#compat-wireless_2.6.39_stable_releases
>
> (Just in case this is a regression.)
>
>
> Adrian
>
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel at lists.ath9k.org
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>
--
shafi
^ permalink raw reply [flat|nested] 4+ messages in thread
* [ath9k-devel] ath9k disconnects (ath: Failed to stop TX DMA!)
@ 2011-12-17 14:50 Mieszko Ślusarczyk
0 siblings, 0 replies; 4+ messages in thread
From: Mieszko Ślusarczyk @ 2011-12-17 14:50 UTC (permalink / raw)
To: ath9k-devel
Hi,
I'm having problems with TP-LINK TL-WN851ND,
after 3-5 minutes of "heavy" load (hostapd offers 130mbit/s, physically I get ~7.1MBytes/s) I get:
`
Dec 15 15:15:40 spitfire-ipfire1 kernel: ath: Failed to stop TX DMA!
Dec 15 15:15:40 spitfire-ipfire1 kernel: ath: Failed to stop TX DMA!
Dec 15 15:15:40 spitfire-ipfire1 kernel: ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026040
Dec 15 15:15:40 spitfire-ipfire1 kernel: ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
Dec 15 15:15:40 spitfire-ipfire1 kernel: ath: Failed to stop TX DMA!
Dec 15 15:15:40 spitfire-ipfire1 kernel: ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006040
Dec 15 15:15:40 spitfire-ipfire1 kernel: ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
and so on.
Ive tried compat-wireless 3.1.1-1 and 3.2_rc1-1
lspci
00:14.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (rev 01)
lspci -n
Code:
00:14.0 0280: 168c:002d (rev 01)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20111217/d81b1e68/attachment.htm
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2011-12-19 13:15 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-12-17 14:34 [ath9k-devel] ath9k disconnects (ath: Failed to stop TX DMA!) Mieszko Ślusarczyk
2011-12-18 10:36 ` Adrian Chadd
2011-12-19 13:15 ` Mohammed Shafi
2011-12-17 14:50 Mieszko Ślusarczyk
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.