* Mesh mode in ath10k
@ 2015-03-14 19:09 Dani Camps
2015-03-17 11:09 ` Bob Copeland
0 siblings, 1 reply; 2+ messages in thread
From: Dani Camps @ 2015-03-14 19:09 UTC (permalink / raw)
To: linux-wireless
Dear all,
Has anyone tested mesh mode (802.11s) with ath10k? Any feedback about
potential problems encountered and hints to resolve them is
appreciated.
Best Regards
Daniel
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Mesh mode in ath10k
2015-03-14 19:09 Mesh mode in ath10k Dani Camps
@ 2015-03-17 11:09 ` Bob Copeland
0 siblings, 0 replies; 2+ messages in thread
From: Bob Copeland @ 2015-03-17 11:09 UTC (permalink / raw)
To: Dani Camps; +Cc: linux-wireless
On Sat, Mar 14, 2015 at 08:09:27PM +0100, Dani Camps wrote:
> Dear all,
>
> Has anyone tested mesh mode (802.11s) with ath10k? Any feedback about
> potential problems encountered and hints to resolve them is
> appreciated.
Hi Dani,
I've spent a little bit of time on it (on the order of an hour or two),
so far without success.
I can get the device to beacon with mesh beacons but have some sort
of issue adding stations and haven't had a chance to debug it. You
will at least need the raw mode patches from here:
http://lists.infradead.org/pipermail/ath10k/2014-September/003206.html
--
Bob Copeland %% http://bobcopeland.com/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2015-03-17 11:09 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-03-14 19:09 Mesh mode in ath10k Dani Camps
2015-03-17 11:09 ` Bob Copeland
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.