All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v2] arm: dts: zynq: Add MicroZed board support
@ 2016-09-22 13:21 ` Jagan Teki
  0 siblings, 0 replies; 18+ messages in thread
From: Jagan Teki @ 2016-09-22 13:21 UTC (permalink / raw)
  To: linux-arm-kernel
  Cc: devicetree, linux-kernel, Jagan Teki, Soren Brinkmann, Michal Simek

From: Jagan Teki <jteki@openedev.com>

Added basic dts support for MicroZed board.

- UART
- SDHCI
- Ethernet

Cc: Soren Brinkmann <soren.brinkmann@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
---
Changes for v2:
	- Add SDHCI
	- Add Ethernet

 arch/arm/boot/dts/Makefile          |  1 +
 arch/arm/boot/dts/zynq-microzed.dts | 95 +++++++++++++++++++++++++++++++++++++
 2 files changed, 96 insertions(+)
 create mode 100644 arch/arm/boot/dts/zynq-microzed.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index faacd52..4d7b858 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
 	wm8750-apc8750.dtb \
 	wm8850-w70v2.dtb
 dtb-$(CONFIG_ARCH_ZYNQ) += \
+	zynq-microzed.dtb \
 	zynq-parallella.dtb \
 	zynq-zc702.dtb \
 	zynq-zc706.dtb \
diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
new file mode 100644
index 0000000..9e64496
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-microzed.dts
@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2015 Jagan Teki <jteki@openedev.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq MicroZED Development Board";
+	compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+};
+
+&pinctrl0 {
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO29", "MIO31", "MIO36";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
+			       "MIO35", "MIO37", "MIO38", "MIO39";
+			bias-disable;
+		};
+	};
+};
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [PATCH v2] arm: dts: zynq: Add MicroZed board support
@ 2016-09-22 13:21 ` Jagan Teki
  0 siblings, 0 replies; 18+ messages in thread
From: Jagan Teki @ 2016-09-22 13:21 UTC (permalink / raw)
  To: linux-arm-kernel

From: Jagan Teki <jteki@openedev.com>

Added basic dts support for MicroZed board.

- UART
- SDHCI
- Ethernet

Cc: Soren Brinkmann <soren.brinkmann@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
---
Changes for v2:
	- Add SDHCI
	- Add Ethernet

 arch/arm/boot/dts/Makefile          |  1 +
 arch/arm/boot/dts/zynq-microzed.dts | 95 +++++++++++++++++++++++++++++++++++++
 2 files changed, 96 insertions(+)
 create mode 100644 arch/arm/boot/dts/zynq-microzed.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index faacd52..4d7b858 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
 	wm8750-apc8750.dtb \
 	wm8850-w70v2.dtb
 dtb-$(CONFIG_ARCH_ZYNQ) += \
+	zynq-microzed.dtb \
 	zynq-parallella.dtb \
 	zynq-zc702.dtb \
 	zynq-zc706.dtb \
diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
new file mode 100644
index 0000000..9e64496
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-microzed.dts
@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2015 Jagan Teki <jteki@openedev.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq MicroZED Development Board";
+	compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy at 0 {
+		reg = <0>;
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+};
+
+&pinctrl0 {
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO29", "MIO31", "MIO36";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
+			       "MIO35", "MIO37", "MIO38", "MIO39";
+			bias-disable;
+		};
+	};
+};
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 18+ messages in thread
* Re: [PATCH v2] arm: dts: zynq: Add MicroZed board support
  2016-09-22 13:21 ` Jagan Teki
  (?)
@ 2016-09-22 20:59   ` Sören Brinkmann
  -1 siblings, 0 replies; 18+ messages in thread
From: Sören Brinkmann @ 2016-09-22 20:59 UTC (permalink / raw)
  To: Jagan Teki
  Cc: linux-arm-kernel, devicetree, linux-kernel, Jagan Teki, Michal Simek

On Thu, 2016-09-22 at 18:51:29 +0530, Jagan Teki wrote:
> From: Jagan Teki <jteki@openedev.com>
> 
> Added basic dts support for MicroZed board.
> 
> - UART
> - SDHCI
> - Ethernet
> 
> Cc: Soren Brinkmann <soren.brinkmann@xilinx.com>
> Cc: Michal Simek <michal.simek@xilinx.com>
> Signed-off-by: Jagan Teki <jteki@openedev.com>
> ---
> Changes for v2:
> 	- Add SDHCI
> 	- Add Ethernet
> 
>  arch/arm/boot/dts/Makefile          |  1 +
>  arch/arm/boot/dts/zynq-microzed.dts | 95 +++++++++++++++++++++++++++++++++++++
>  2 files changed, 96 insertions(+)
>  create mode 100644 arch/arm/boot/dts/zynq-microzed.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index faacd52..4d7b858 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
>  	wm8750-apc8750.dtb \
>  	wm8850-w70v2.dtb
>  dtb-$(CONFIG_ARCH_ZYNQ) += \
> +	zynq-microzed.dtb \
>  	zynq-parallella.dtb \
>  	zynq-zc702.dtb \
>  	zynq-zc706.dtb \
> diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
> new file mode 100644
> index 0000000..9e64496
> --- /dev/null
> +++ b/arch/arm/boot/dts/zynq-microzed.dts
> @@ -0,0 +1,95 @@
> +/*
> + * Copyright (C) 2015 Jagan Teki <jteki@openedev.com>
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +/dts-v1/;
> +/include/ "zynq-7000.dtsi"
> +
> +/ {
> +	model = "Zynq MicroZED Development Board";
> +	compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000";
> +
> +	aliases {
> +		ethernet0 = &gem0;
> +		serial0 = &uart1;
> +	};
> +
> +	memory {
> +		device_type = "memory";
> +		reg = <0x0 0x40000000>;
> +	};
> +
> +	chosen {
> +		bootargs = "earlycon";
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	usb_phy0: phy0 {
> +		compatible = "usb-nop-xceiv";
> +		#phy-cells = <0>;
> +	};
> +};
> +
> +&clkc {
> +	ps-clk-frequency = <33333333>;
> +};
> +
> +&gem0 {
> +	status = "okay";
> +	phy-mode = "rgmii-id";
> +	phy-handle = <&ethernet_phy>;
> +
> +	ethernet_phy: ethernet-phy@0 {
> +		reg = <0>;
> +	};
> +};
> +
> +&sdhci0 {
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	status = "okay";
> +};
> +
> +&usb0 {
> +	status = "okay";
> +	dr_mode = "host";
> +	usb-phy = <&usb_phy0>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usb0_default>;
> +};
> +
> +&pinctrl0 {
> +	pinctrl_usb0_default: usb0-default {
> +		mux {
> +			groups = "usb0_0_grp";
> +			function = "usb0";
> +		};
> +
> +		conf {
> +			groups = "usb0_0_grp";
> +			slew-rate = <0>;
> +			io-standard = <1>;
> +		};
> +
> +		conf-rx {
> +			pins = "MIO29", "MIO31", "MIO36";
> +			bias-high-impedance;
> +		};
> +
> +		conf-tx {
> +			pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
> +			       "MIO35", "MIO37", "MIO38", "MIO39";
> +			bias-disable;
> +		};
> +	};
> +};

I guess it's not strictly required, but shouldn't there be pinctrl
descriptions for all devices?

	Sören

^ permalink raw reply	[flat|nested] 18+ messages in thread
* Re: [PATCH v2] arm: dts: zynq: Add MicroZed board support
@ 2016-09-22 20:59   ` Sören Brinkmann
  0 siblings, 0 replies; 18+ messages in thread
From: Sören Brinkmann @ 2016-09-22 20:59 UTC (permalink / raw)
  To: Jagan Teki
  Cc: Jagan Teki, devicetree, linux-kernel, linux-arm-kernel, Michal Simek

On Thu, 2016-09-22 at 18:51:29 +0530, Jagan Teki wrote:
> From: Jagan Teki <jteki@openedev.com>
> 
> Added basic dts support for MicroZed board.
> 
> - UART
> - SDHCI
> - Ethernet
> 
> Cc: Soren Brinkmann <soren.brinkmann@xilinx.com>
> Cc: Michal Simek <michal.simek@xilinx.com>
> Signed-off-by: Jagan Teki <jteki@openedev.com>
> ---
> Changes for v2:
> 	- Add SDHCI
> 	- Add Ethernet
> 
>  arch/arm/boot/dts/Makefile          |  1 +
>  arch/arm/boot/dts/zynq-microzed.dts | 95 +++++++++++++++++++++++++++++++++++++
>  2 files changed, 96 insertions(+)
>  create mode 100644 arch/arm/boot/dts/zynq-microzed.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index faacd52..4d7b858 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
>  	wm8750-apc8750.dtb \
>  	wm8850-w70v2.dtb
>  dtb-$(CONFIG_ARCH_ZYNQ) += \
> +	zynq-microzed.dtb \
>  	zynq-parallella.dtb \
>  	zynq-zc702.dtb \
>  	zynq-zc706.dtb \
> diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
> new file mode 100644
> index 0000000..9e64496
> --- /dev/null
> +++ b/arch/arm/boot/dts/zynq-microzed.dts
> @@ -0,0 +1,95 @@
> +/*
> + * Copyright (C) 2015 Jagan Teki <jteki@openedev.com>
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +/dts-v1/;
> +/include/ "zynq-7000.dtsi"
> +
> +/ {
> +	model = "Zynq MicroZED Development Board";
> +	compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000";
> +
> +	aliases {
> +		ethernet0 = &gem0;
> +		serial0 = &uart1;
> +	};
> +
> +	memory {
> +		device_type = "memory";
> +		reg = <0x0 0x40000000>;
> +	};
> +
> +	chosen {
> +		bootargs = "earlycon";
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	usb_phy0: phy0 {
> +		compatible = "usb-nop-xceiv";
> +		#phy-cells = <0>;
> +	};
> +};
> +
> +&clkc {
> +	ps-clk-frequency = <33333333>;
> +};
> +
> +&gem0 {
> +	status = "okay";
> +	phy-mode = "rgmii-id";
> +	phy-handle = <&ethernet_phy>;
> +
> +	ethernet_phy: ethernet-phy@0 {
> +		reg = <0>;
> +	};
> +};
> +
> +&sdhci0 {
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	status = "okay";
> +};
> +
> +&usb0 {
> +	status = "okay";
> +	dr_mode = "host";
> +	usb-phy = <&usb_phy0>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usb0_default>;
> +};
> +
> +&pinctrl0 {
> +	pinctrl_usb0_default: usb0-default {
> +		mux {
> +			groups = "usb0_0_grp";
> +			function = "usb0";
> +		};
> +
> +		conf {
> +			groups = "usb0_0_grp";
> +			slew-rate = <0>;
> +			io-standard = <1>;
> +		};
> +
> +		conf-rx {
> +			pins = "MIO29", "MIO31", "MIO36";
> +			bias-high-impedance;
> +		};
> +
> +		conf-tx {
> +			pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
> +			       "MIO35", "MIO37", "MIO38", "MIO39";
> +			bias-disable;
> +		};
> +	};
> +};

I guess it's not strictly required, but shouldn't there be pinctrl
descriptions for all devices?

	Sören

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 18+ messages in thread
* [PATCH v2] arm: dts: zynq: Add MicroZed board support
@ 2016-09-22 20:59   ` Sören Brinkmann
  0 siblings, 0 replies; 18+ messages in thread
From: Sören Brinkmann @ 2016-09-22 20:59 UTC (permalink / raw)
  To: linux-arm-kernel

On Thu, 2016-09-22 at 18:51:29 +0530, Jagan Teki wrote:
> From: Jagan Teki <jteki@openedev.com>
> 
> Added basic dts support for MicroZed board.
> 
> - UART
> - SDHCI
> - Ethernet
> 
> Cc: Soren Brinkmann <soren.brinkmann@xilinx.com>
> Cc: Michal Simek <michal.simek@xilinx.com>
> Signed-off-by: Jagan Teki <jteki@openedev.com>
> ---
> Changes for v2:
> 	- Add SDHCI
> 	- Add Ethernet
> 
>  arch/arm/boot/dts/Makefile          |  1 +
>  arch/arm/boot/dts/zynq-microzed.dts | 95 +++++++++++++++++++++++++++++++++++++
>  2 files changed, 96 insertions(+)
>  create mode 100644 arch/arm/boot/dts/zynq-microzed.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index faacd52..4d7b858 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
>  	wm8750-apc8750.dtb \
>  	wm8850-w70v2.dtb
>  dtb-$(CONFIG_ARCH_ZYNQ) += \
> +	zynq-microzed.dtb \
>  	zynq-parallella.dtb \
>  	zynq-zc702.dtb \
>  	zynq-zc706.dtb \
> diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
> new file mode 100644
> index 0000000..9e64496
> --- /dev/null
> +++ b/arch/arm/boot/dts/zynq-microzed.dts
> @@ -0,0 +1,95 @@
> +/*
> + * Copyright (C) 2015 Jagan Teki <jteki@openedev.com>
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +/dts-v1/;
> +/include/ "zynq-7000.dtsi"
> +
> +/ {
> +	model = "Zynq MicroZED Development Board";
> +	compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000";
> +
> +	aliases {
> +		ethernet0 = &gem0;
> +		serial0 = &uart1;
> +	};
> +
> +	memory {
> +		device_type = "memory";
> +		reg = <0x0 0x40000000>;
> +	};
> +
> +	chosen {
> +		bootargs = "earlycon";
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	usb_phy0: phy0 {
> +		compatible = "usb-nop-xceiv";
> +		#phy-cells = <0>;
> +	};
> +};
> +
> +&clkc {
> +	ps-clk-frequency = <33333333>;
> +};
> +
> +&gem0 {
> +	status = "okay";
> +	phy-mode = "rgmii-id";
> +	phy-handle = <&ethernet_phy>;
> +
> +	ethernet_phy: ethernet-phy at 0 {
> +		reg = <0>;
> +	};
> +};
> +
> +&sdhci0 {
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	status = "okay";
> +};
> +
> +&usb0 {
> +	status = "okay";
> +	dr_mode = "host";
> +	usb-phy = <&usb_phy0>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usb0_default>;
> +};
> +
> +&pinctrl0 {
> +	pinctrl_usb0_default: usb0-default {
> +		mux {
> +			groups = "usb0_0_grp";
> +			function = "usb0";
> +		};
> +
> +		conf {
> +			groups = "usb0_0_grp";
> +			slew-rate = <0>;
> +			io-standard = <1>;
> +		};
> +
> +		conf-rx {
> +			pins = "MIO29", "MIO31", "MIO36";
> +			bias-high-impedance;
> +		};
> +
> +		conf-tx {
> +			pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
> +			       "MIO35", "MIO37", "MIO38", "MIO39";
> +			bias-disable;
> +		};
> +	};
> +};

I guess it's not strictly required, but shouldn't there be pinctrl
descriptions for all devices?

	S?ren

^ permalink raw reply	[flat|nested] 18+ messages in thread
* Re: [PATCH v2] arm: dts: zynq: Add MicroZed board support
  2016-09-22 20:59   ` Sören Brinkmann
  (?)
@ 2016-09-23  6:03     ` Michal Simek
  -1 siblings, 0 replies; 18+ messages in thread
From: Michal Simek @ 2016-09-23  6:03 UTC (permalink / raw)
  To: Sören Brinkmann, Jagan Teki
  Cc: linux-arm-kernel, devicetree, linux-kernel, Jagan Teki, Michal Simek

On 22.9.2016 22:59, Sören Brinkmann wrote:
> On Thu, 2016-09-22 at 18:51:29 +0530, Jagan Teki wrote:
>> From: Jagan Teki <jteki@openedev.com>
>>
>> Added basic dts support for MicroZed board.
>>
>> - UART
>> - SDHCI
>> - Ethernet
>>
>> Cc: Soren Brinkmann <soren.brinkmann@xilinx.com>
>> Cc: Michal Simek <michal.simek@xilinx.com>
>> Signed-off-by: Jagan Teki <jteki@openedev.com>
>> ---
>> Changes for v2:
>> 	- Add SDHCI
>> 	- Add Ethernet
>>
>>  arch/arm/boot/dts/Makefile          |  1 +
>>  arch/arm/boot/dts/zynq-microzed.dts | 95 +++++++++++++++++++++++++++++++++++++
>>  2 files changed, 96 insertions(+)
>>  create mode 100644 arch/arm/boot/dts/zynq-microzed.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index faacd52..4d7b858 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
>>  	wm8750-apc8750.dtb \
>>  	wm8850-w70v2.dtb
>>  dtb-$(CONFIG_ARCH_ZYNQ) += \
>> +	zynq-microzed.dtb \
>>  	zynq-parallella.dtb \
>>  	zynq-zc702.dtb \
>>  	zynq-zc706.dtb \
>> diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
>> new file mode 100644
>> index 0000000..9e64496
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/zynq-microzed.dts
>> @@ -0,0 +1,95 @@
>> +/*
>> + * Copyright (C) 2015 Jagan Teki <jteki@openedev.com>


Did you created only yourself without copying part of this from others?
There is dts in u-boot which I believe you are aware of.

Thanks,
Michal

^ permalink raw reply	[flat|nested] 18+ messages in thread
* Re: [PATCH v2] arm: dts: zynq: Add MicroZed board support
@ 2016-09-23  6:03     ` Michal Simek
  0 siblings, 0 replies; 18+ messages in thread
From: Michal Simek @ 2016-09-23  6:03 UTC (permalink / raw)
  To: Sören Brinkmann, Jagan Teki
  Cc: Jagan Teki, devicetree, linux-kernel, linux-arm-kernel, Michal Simek

On 22.9.2016 22:59, Sören Brinkmann wrote:
> On Thu, 2016-09-22 at 18:51:29 +0530, Jagan Teki wrote:
>> From: Jagan Teki <jteki@openedev.com>
>>
>> Added basic dts support for MicroZed board.
>>
>> - UART
>> - SDHCI
>> - Ethernet
>>
>> Cc: Soren Brinkmann <soren.brinkmann@xilinx.com>
>> Cc: Michal Simek <michal.simek@xilinx.com>
>> Signed-off-by: Jagan Teki <jteki@openedev.com>
>> ---
>> Changes for v2:
>> 	- Add SDHCI
>> 	- Add Ethernet
>>
>>  arch/arm/boot/dts/Makefile          |  1 +
>>  arch/arm/boot/dts/zynq-microzed.dts | 95 +++++++++++++++++++++++++++++++++++++
>>  2 files changed, 96 insertions(+)
>>  create mode 100644 arch/arm/boot/dts/zynq-microzed.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index faacd52..4d7b858 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
>>  	wm8750-apc8750.dtb \
>>  	wm8850-w70v2.dtb
>>  dtb-$(CONFIG_ARCH_ZYNQ) += \
>> +	zynq-microzed.dtb \
>>  	zynq-parallella.dtb \
>>  	zynq-zc702.dtb \
>>  	zynq-zc706.dtb \
>> diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
>> new file mode 100644
>> index 0000000..9e64496
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/zynq-microzed.dts
>> @@ -0,0 +1,95 @@
>> +/*
>> + * Copyright (C) 2015 Jagan Teki <jteki@openedev.com>


Did you created only yourself without copying part of this from others?
There is dts in u-boot which I believe you are aware of.

Thanks,
Michal

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 18+ messages in thread
* [PATCH v2] arm: dts: zynq: Add MicroZed board support
@ 2016-09-23  6:03     ` Michal Simek
  0 siblings, 0 replies; 18+ messages in thread
From: Michal Simek @ 2016-09-23  6:03 UTC (permalink / raw)
  To: linux-arm-kernel

On 22.9.2016 22:59, S?ren Brinkmann wrote:
> On Thu, 2016-09-22 at 18:51:29 +0530, Jagan Teki wrote:
>> From: Jagan Teki <jteki@openedev.com>
>>
>> Added basic dts support for MicroZed board.
>>
>> - UART
>> - SDHCI
>> - Ethernet
>>
>> Cc: Soren Brinkmann <soren.brinkmann@xilinx.com>
>> Cc: Michal Simek <michal.simek@xilinx.com>
>> Signed-off-by: Jagan Teki <jteki@openedev.com>
>> ---
>> Changes for v2:
>> 	- Add SDHCI
>> 	- Add Ethernet
>>
>>  arch/arm/boot/dts/Makefile          |  1 +
>>  arch/arm/boot/dts/zynq-microzed.dts | 95 +++++++++++++++++++++++++++++++++++++
>>  2 files changed, 96 insertions(+)
>>  create mode 100644 arch/arm/boot/dts/zynq-microzed.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index faacd52..4d7b858 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
>>  	wm8750-apc8750.dtb \
>>  	wm8850-w70v2.dtb
>>  dtb-$(CONFIG_ARCH_ZYNQ) += \
>> +	zynq-microzed.dtb \
>>  	zynq-parallella.dtb \
>>  	zynq-zc702.dtb \
>>  	zynq-zc706.dtb \
>> diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
>> new file mode 100644
>> index 0000000..9e64496
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/zynq-microzed.dts
>> @@ -0,0 +1,95 @@
>> +/*
>> + * Copyright (C) 2015 Jagan Teki <jteki@openedev.com>


Did you created only yourself without copying part of this from others?
There is dts in u-boot which I believe you are aware of.

Thanks,
Michal

^ permalink raw reply	[flat|nested] 18+ messages in thread
* Re: [PATCH v2] arm: dts: zynq: Add MicroZed board support
@ 2016-09-23  7:39       ` Jagan Teki
  0 siblings, 0 replies; 18+ messages in thread
From: Jagan Teki @ 2016-09-23  7:39 UTC (permalink / raw)
  To: Michal Simek
  Cc: Sören Brinkmann, linux-arm-kernel, devicetree, linux-kernel

On Fri, Sep 23, 2016 at 11:33 AM, Michal Simek <michal.simek@xilinx.com> wrote:
> On 22.9.2016 22:59, Sören Brinkmann wrote:
>> On Thu, 2016-09-22 at 18:51:29 +0530, Jagan Teki wrote:
>>> From: Jagan Teki <jteki@openedev.com>
>>>
>>> Added basic dts support for MicroZed board.
>>>
>>> - UART
>>> - SDHCI
>>> - Ethernet
>>>
>>> Cc: Soren Brinkmann <soren.brinkmann@xilinx.com>
>>> Cc: Michal Simek <michal.simek@xilinx.com>
>>> Signed-off-by: Jagan Teki <jteki@openedev.com>
>>> ---
>>> Changes for v2:
>>>      - Add SDHCI
>>>      - Add Ethernet
>>>
>>>  arch/arm/boot/dts/Makefile          |  1 +
>>>  arch/arm/boot/dts/zynq-microzed.dts | 95 +++++++++++++++++++++++++++++++++++++
>>>  2 files changed, 96 insertions(+)
>>>  create mode 100644 arch/arm/boot/dts/zynq-microzed.dts
>>>
>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>>> index faacd52..4d7b858 100644
>>> --- a/arch/arm/boot/dts/Makefile
>>> +++ b/arch/arm/boot/dts/Makefile
>>> @@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
>>>      wm8750-apc8750.dtb \
>>>      wm8850-w70v2.dtb
>>>  dtb-$(CONFIG_ARCH_ZYNQ) += \
>>> +    zynq-microzed.dtb \
>>>      zynq-parallella.dtb \
>>>      zynq-zc702.dtb \
>>>      zynq-zc706.dtb \
>>> diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
>>> new file mode 100644
>>> index 0000000..9e64496
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/zynq-microzed.dts
>>> @@ -0,0 +1,95 @@
>>> +/*
>>> + * Copyright (C) 2015 Jagan Teki <jteki@openedev.com>
>
>
> Did you created only yourself without copying part of this from others?
> There is dts in u-boot which I believe you are aware of.

I sent the initial one few months back so at that time, I was created
and now I just added USB and Ethernet with the reference of zc702
board.

thanks!
-- 
Jagan.

^ permalink raw reply	[flat|nested] 18+ messages in thread
* Re: [PATCH v2] arm: dts: zynq: Add MicroZed board support
@ 2016-09-23  7:39       ` Jagan Teki
  0 siblings, 0 replies; 18+ messages in thread
From: Jagan Teki @ 2016-09-23  7:39 UTC (permalink / raw)
  To: Michal Simek
  Cc: Sören Brinkmann,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA

On Fri, Sep 23, 2016 at 11:33 AM, Michal Simek <michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org> wrote:
> On 22.9.2016 22:59, Sören Brinkmann wrote:
>> On Thu, 2016-09-22 at 18:51:29 +0530, Jagan Teki wrote:
>>> From: Jagan Teki <jteki-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>
>>>
>>> Added basic dts support for MicroZed board.
>>>
>>> - UART
>>> - SDHCI
>>> - Ethernet
>>>
>>> Cc: Soren Brinkmann <soren.brinkmann-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
>>> Cc: Michal Simek <michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
>>> Signed-off-by: Jagan Teki <jteki-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>
>>> ---
>>> Changes for v2:
>>>      - Add SDHCI
>>>      - Add Ethernet
>>>
>>>  arch/arm/boot/dts/Makefile          |  1 +
>>>  arch/arm/boot/dts/zynq-microzed.dts | 95 +++++++++++++++++++++++++++++++++++++
>>>  2 files changed, 96 insertions(+)
>>>  create mode 100644 arch/arm/boot/dts/zynq-microzed.dts
>>>
>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>>> index faacd52..4d7b858 100644
>>> --- a/arch/arm/boot/dts/Makefile
>>> +++ b/arch/arm/boot/dts/Makefile
>>> @@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
>>>      wm8750-apc8750.dtb \
>>>      wm8850-w70v2.dtb
>>>  dtb-$(CONFIG_ARCH_ZYNQ) += \
>>> +    zynq-microzed.dtb \
>>>      zynq-parallella.dtb \
>>>      zynq-zc702.dtb \
>>>      zynq-zc706.dtb \
>>> diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
>>> new file mode 100644
>>> index 0000000..9e64496
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/zynq-microzed.dts
>>> @@ -0,0 +1,95 @@
>>> +/*
>>> + * Copyright (C) 2015 Jagan Teki <jteki-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>
>
>
> Did you created only yourself without copying part of this from others?
> There is dts in u-boot which I believe you are aware of.

I sent the initial one few months back so at that time, I was created
and now I just added USB and Ethernet with the reference of zc702
board.

thanks!
-- 
Jagan.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 18+ messages in thread
* [PATCH v2] arm: dts: zynq: Add MicroZed board support
@ 2016-09-23  7:39       ` Jagan Teki
  0 siblings, 0 replies; 18+ messages in thread
From: Jagan Teki @ 2016-09-23  7:39 UTC (permalink / raw)
  To: linux-arm-kernel

On Fri, Sep 23, 2016 at 11:33 AM, Michal Simek <michal.simek@xilinx.com> wrote:
> On 22.9.2016 22:59, S?ren Brinkmann wrote:
>> On Thu, 2016-09-22 at 18:51:29 +0530, Jagan Teki wrote:
>>> From: Jagan Teki <jteki@openedev.com>
>>>
>>> Added basic dts support for MicroZed board.
>>>
>>> - UART
>>> - SDHCI
>>> - Ethernet
>>>
>>> Cc: Soren Brinkmann <soren.brinkmann@xilinx.com>
>>> Cc: Michal Simek <michal.simek@xilinx.com>
>>> Signed-off-by: Jagan Teki <jteki@openedev.com>
>>> ---
>>> Changes for v2:
>>>      - Add SDHCI
>>>      - Add Ethernet
>>>
>>>  arch/arm/boot/dts/Makefile          |  1 +
>>>  arch/arm/boot/dts/zynq-microzed.dts | 95 +++++++++++++++++++++++++++++++++++++
>>>  2 files changed, 96 insertions(+)
>>>  create mode 100644 arch/arm/boot/dts/zynq-microzed.dts
>>>
>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>>> index faacd52..4d7b858 100644
>>> --- a/arch/arm/boot/dts/Makefile
>>> +++ b/arch/arm/boot/dts/Makefile
>>> @@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
>>>      wm8750-apc8750.dtb \
>>>      wm8850-w70v2.dtb
>>>  dtb-$(CONFIG_ARCH_ZYNQ) += \
>>> +    zynq-microzed.dtb \
>>>      zynq-parallella.dtb \
>>>      zynq-zc702.dtb \
>>>      zynq-zc706.dtb \
>>> diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
>>> new file mode 100644
>>> index 0000000..9e64496
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/zynq-microzed.dts
>>> @@ -0,0 +1,95 @@
>>> +/*
>>> + * Copyright (C) 2015 Jagan Teki <jteki@openedev.com>
>
>
> Did you created only yourself without copying part of this from others?
> There is dts in u-boot which I believe you are aware of.

I sent the initial one few months back so at that time, I was created
and now I just added USB and Ethernet with the reference of zc702
board.

thanks!
-- 
Jagan.

^ permalink raw reply	[flat|nested] 18+ messages in thread
* Re: [PATCH v2] arm: dts: zynq: Add MicroZed board support
  2016-09-23  7:39       ` Jagan Teki
  (?)
@ 2016-09-23  8:37         ` Michal Simek
  -1 siblings, 0 replies; 18+ messages in thread
From: Michal Simek @ 2016-09-23  8:37 UTC (permalink / raw)
  To: Jagan Teki, Michal Simek
  Cc: Sören Brinkmann, linux-arm-kernel, devicetree, linux-kernel

On 23.9.2016 09:39, Jagan Teki wrote:
> On Fri, Sep 23, 2016 at 11:33 AM, Michal Simek <michal.simek@xilinx.com> wrote:
>> On 22.9.2016 22:59, Sören Brinkmann wrote:
>>> On Thu, 2016-09-22 at 18:51:29 +0530, Jagan Teki wrote:
>>>> From: Jagan Teki <jteki@openedev.com>
>>>>
>>>> Added basic dts support for MicroZed board.
>>>>
>>>> - UART
>>>> - SDHCI
>>>> - Ethernet
>>>>
>>>> Cc: Soren Brinkmann <soren.brinkmann@xilinx.com>
>>>> Cc: Michal Simek <michal.simek@xilinx.com>
>>>> Signed-off-by: Jagan Teki <jteki@openedev.com>
>>>> ---
>>>> Changes for v2:
>>>>      - Add SDHCI
>>>>      - Add Ethernet
>>>>
>>>>  arch/arm/boot/dts/Makefile          |  1 +
>>>>  arch/arm/boot/dts/zynq-microzed.dts | 95 +++++++++++++++++++++++++++++++++++++
>>>>  2 files changed, 96 insertions(+)
>>>>  create mode 100644 arch/arm/boot/dts/zynq-microzed.dts
>>>>
>>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>>>> index faacd52..4d7b858 100644
>>>> --- a/arch/arm/boot/dts/Makefile
>>>> +++ b/arch/arm/boot/dts/Makefile
>>>> @@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
>>>>      wm8750-apc8750.dtb \
>>>>      wm8850-w70v2.dtb
>>>>  dtb-$(CONFIG_ARCH_ZYNQ) += \
>>>> +    zynq-microzed.dtb \
>>>>      zynq-parallella.dtb \
>>>>      zynq-zc702.dtb \
>>>>      zynq-zc706.dtb \
>>>> diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
>>>> new file mode 100644
>>>> index 0000000..9e64496
>>>> --- /dev/null
>>>> +++ b/arch/arm/boot/dts/zynq-microzed.dts
>>>> @@ -0,0 +1,95 @@
>>>> +/*
>>>> + * Copyright (C) 2015 Jagan Teki <jteki@openedev.com>
>>
>>
>> Did you created only yourself without copying part of this from others?
>> There is dts in u-boot which I believe you are aware of.
> 
> I sent the initial one few months back so at that time, I was created
> and now I just added USB and Ethernet with the reference of zc702
> board.

Can you send me a link to that post? I didn't find it.
Anyway you should keep Xilinx copyright there.

Thanks,
Michal

^ permalink raw reply	[flat|nested] 18+ messages in thread
* Re: [PATCH v2] arm: dts: zynq: Add MicroZed board support
@ 2016-09-23  8:37         ` Michal Simek
  0 siblings, 0 replies; 18+ messages in thread
From: Michal Simek @ 2016-09-23  8:37 UTC (permalink / raw)
  To: Jagan Teki, Michal Simek
  Cc: devicetree, linux-arm-kernel, Sören Brinkmann, linux-kernel

On 23.9.2016 09:39, Jagan Teki wrote:
> On Fri, Sep 23, 2016 at 11:33 AM, Michal Simek <michal.simek@xilinx.com> wrote:
>> On 22.9.2016 22:59, Sören Brinkmann wrote:
>>> On Thu, 2016-09-22 at 18:51:29 +0530, Jagan Teki wrote:
>>>> From: Jagan Teki <jteki@openedev.com>
>>>>
>>>> Added basic dts support for MicroZed board.
>>>>
>>>> - UART
>>>> - SDHCI
>>>> - Ethernet
>>>>
>>>> Cc: Soren Brinkmann <soren.brinkmann@xilinx.com>
>>>> Cc: Michal Simek <michal.simek@xilinx.com>
>>>> Signed-off-by: Jagan Teki <jteki@openedev.com>
>>>> ---
>>>> Changes for v2:
>>>>      - Add SDHCI
>>>>      - Add Ethernet
>>>>
>>>>  arch/arm/boot/dts/Makefile          |  1 +
>>>>  arch/arm/boot/dts/zynq-microzed.dts | 95 +++++++++++++++++++++++++++++++++++++
>>>>  2 files changed, 96 insertions(+)
>>>>  create mode 100644 arch/arm/boot/dts/zynq-microzed.dts
>>>>
>>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>>>> index faacd52..4d7b858 100644
>>>> --- a/arch/arm/boot/dts/Makefile
>>>> +++ b/arch/arm/boot/dts/Makefile
>>>> @@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
>>>>      wm8750-apc8750.dtb \
>>>>      wm8850-w70v2.dtb
>>>>  dtb-$(CONFIG_ARCH_ZYNQ) += \
>>>> +    zynq-microzed.dtb \
>>>>      zynq-parallella.dtb \
>>>>      zynq-zc702.dtb \
>>>>      zynq-zc706.dtb \
>>>> diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
>>>> new file mode 100644
>>>> index 0000000..9e64496
>>>> --- /dev/null
>>>> +++ b/arch/arm/boot/dts/zynq-microzed.dts
>>>> @@ -0,0 +1,95 @@
>>>> +/*
>>>> + * Copyright (C) 2015 Jagan Teki <jteki@openedev.com>
>>
>>
>> Did you created only yourself without copying part of this from others?
>> There is dts in u-boot which I believe you are aware of.
> 
> I sent the initial one few months back so at that time, I was created
> and now I just added USB and Ethernet with the reference of zc702
> board.

Can you send me a link to that post? I didn't find it.
Anyway you should keep Xilinx copyright there.

Thanks,
Michal



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 18+ messages in thread
* [PATCH v2] arm: dts: zynq: Add MicroZed board support
@ 2016-09-23  8:37         ` Michal Simek
  0 siblings, 0 replies; 18+ messages in thread
From: Michal Simek @ 2016-09-23  8:37 UTC (permalink / raw)
  To: linux-arm-kernel

On 23.9.2016 09:39, Jagan Teki wrote:
> On Fri, Sep 23, 2016 at 11:33 AM, Michal Simek <michal.simek@xilinx.com> wrote:
>> On 22.9.2016 22:59, S?ren Brinkmann wrote:
>>> On Thu, 2016-09-22 at 18:51:29 +0530, Jagan Teki wrote:
>>>> From: Jagan Teki <jteki@openedev.com>
>>>>
>>>> Added basic dts support for MicroZed board.
>>>>
>>>> - UART
>>>> - SDHCI
>>>> - Ethernet
>>>>
>>>> Cc: Soren Brinkmann <soren.brinkmann@xilinx.com>
>>>> Cc: Michal Simek <michal.simek@xilinx.com>
>>>> Signed-off-by: Jagan Teki <jteki@openedev.com>
>>>> ---
>>>> Changes for v2:
>>>>      - Add SDHCI
>>>>      - Add Ethernet
>>>>
>>>>  arch/arm/boot/dts/Makefile          |  1 +
>>>>  arch/arm/boot/dts/zynq-microzed.dts | 95 +++++++++++++++++++++++++++++++++++++
>>>>  2 files changed, 96 insertions(+)
>>>>  create mode 100644 arch/arm/boot/dts/zynq-microzed.dts
>>>>
>>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>>>> index faacd52..4d7b858 100644
>>>> --- a/arch/arm/boot/dts/Makefile
>>>> +++ b/arch/arm/boot/dts/Makefile
>>>> @@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
>>>>      wm8750-apc8750.dtb \
>>>>      wm8850-w70v2.dtb
>>>>  dtb-$(CONFIG_ARCH_ZYNQ) += \
>>>> +    zynq-microzed.dtb \
>>>>      zynq-parallella.dtb \
>>>>      zynq-zc702.dtb \
>>>>      zynq-zc706.dtb \
>>>> diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
>>>> new file mode 100644
>>>> index 0000000..9e64496
>>>> --- /dev/null
>>>> +++ b/arch/arm/boot/dts/zynq-microzed.dts
>>>> @@ -0,0 +1,95 @@
>>>> +/*
>>>> + * Copyright (C) 2015 Jagan Teki <jteki@openedev.com>
>>
>>
>> Did you created only yourself without copying part of this from others?
>> There is dts in u-boot which I believe you are aware of.
> 
> I sent the initial one few months back so at that time, I was created
> and now I just added USB and Ethernet with the reference of zc702
> board.

Can you send me a link to that post? I didn't find it.
Anyway you should keep Xilinx copyright there.

Thanks,
Michal

^ permalink raw reply	[flat|nested] 18+ messages in thread
* Re: [PATCH v2] arm: dts: zynq: Add MicroZed board support
  2016-09-23  8:37         ` Michal Simek
@ 2016-09-23  8:42           ` Jagan Teki
  -1 siblings, 0 replies; 18+ messages in thread
From: Jagan Teki @ 2016-09-23  8:42 UTC (permalink / raw)
  To: Michal Simek
  Cc: Sören Brinkmann, linux-arm-kernel, devicetree, linux-kernel

On Fri, Sep 23, 2016 at 2:07 PM, Michal Simek <michal.simek@xilinx.com> wrote:
> On 23.9.2016 09:39, Jagan Teki wrote:
>> On Fri, Sep 23, 2016 at 11:33 AM, Michal Simek <michal.simek@xilinx.com> wrote:
>>> On 22.9.2016 22:59, Sören Brinkmann wrote:
>>>> On Thu, 2016-09-22 at 18:51:29 +0530, Jagan Teki wrote:
>>>>> From: Jagan Teki <jteki@openedev.com>
>>>>>
>>>>> Added basic dts support for MicroZed board.
>>>>>
>>>>> - UART
>>>>> - SDHCI
>>>>> - Ethernet
>>>>>
>>>>> Cc: Soren Brinkmann <soren.brinkmann@xilinx.com>
>>>>> Cc: Michal Simek <michal.simek@xilinx.com>
>>>>> Signed-off-by: Jagan Teki <jteki@openedev.com>
>>>>> ---
>>>>> Changes for v2:
>>>>>      - Add SDHCI
>>>>>      - Add Ethernet
>>>>>
>>>>>  arch/arm/boot/dts/Makefile          |  1 +
>>>>>  arch/arm/boot/dts/zynq-microzed.dts | 95 +++++++++++++++++++++++++++++++++++++
>>>>>  2 files changed, 96 insertions(+)
>>>>>  create mode 100644 arch/arm/boot/dts/zynq-microzed.dts
>>>>>
>>>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>>>>> index faacd52..4d7b858 100644
>>>>> --- a/arch/arm/boot/dts/Makefile
>>>>> +++ b/arch/arm/boot/dts/Makefile
>>>>> @@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
>>>>>      wm8750-apc8750.dtb \
>>>>>      wm8850-w70v2.dtb
>>>>>  dtb-$(CONFIG_ARCH_ZYNQ) += \
>>>>> +    zynq-microzed.dtb \
>>>>>      zynq-parallella.dtb \
>>>>>      zynq-zc702.dtb \
>>>>>      zynq-zc706.dtb \
>>>>> diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
>>>>> new file mode 100644
>>>>> index 0000000..9e64496
>>>>> --- /dev/null
>>>>> +++ b/arch/arm/boot/dts/zynq-microzed.dts
>>>>> @@ -0,0 +1,95 @@
>>>>> +/*
>>>>> + * Copyright (C) 2015 Jagan Teki <jteki@openedev.com>
>>>
>>>
>>> Did you created only yourself without copying part of this from others?
>>> There is dts in u-boot which I believe you are aware of.
>>
>> I sent the initial one few months back so at that time, I was created
>> and now I just added USB and Ethernet with the reference of zc702
>> board.
>
> Can you send me a link to that post? I didn't find it.

Here is the link [1]

> Anyway you should keep Xilinx copyright there.

OK then will append Xilinx as well.

[1] http://lkml.iu.edu/hypermail/linux/kernel/1601.1/03236.html

thanks!
-- 
Jagan.

^ permalink raw reply	[flat|nested] 18+ messages in thread
* [PATCH v2] arm: dts: zynq: Add MicroZed board support
@ 2016-09-23  8:42           ` Jagan Teki
  0 siblings, 0 replies; 18+ messages in thread
From: Jagan Teki @ 2016-09-23  8:42 UTC (permalink / raw)
  To: linux-arm-kernel

On Fri, Sep 23, 2016 at 2:07 PM, Michal Simek <michal.simek@xilinx.com> wrote:
> On 23.9.2016 09:39, Jagan Teki wrote:
>> On Fri, Sep 23, 2016 at 11:33 AM, Michal Simek <michal.simek@xilinx.com> wrote:
>>> On 22.9.2016 22:59, S?ren Brinkmann wrote:
>>>> On Thu, 2016-09-22 at 18:51:29 +0530, Jagan Teki wrote:
>>>>> From: Jagan Teki <jteki@openedev.com>
>>>>>
>>>>> Added basic dts support for MicroZed board.
>>>>>
>>>>> - UART
>>>>> - SDHCI
>>>>> - Ethernet
>>>>>
>>>>> Cc: Soren Brinkmann <soren.brinkmann@xilinx.com>
>>>>> Cc: Michal Simek <michal.simek@xilinx.com>
>>>>> Signed-off-by: Jagan Teki <jteki@openedev.com>
>>>>> ---
>>>>> Changes for v2:
>>>>>      - Add SDHCI
>>>>>      - Add Ethernet
>>>>>
>>>>>  arch/arm/boot/dts/Makefile          |  1 +
>>>>>  arch/arm/boot/dts/zynq-microzed.dts | 95 +++++++++++++++++++++++++++++++++++++
>>>>>  2 files changed, 96 insertions(+)
>>>>>  create mode 100644 arch/arm/boot/dts/zynq-microzed.dts
>>>>>
>>>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>>>>> index faacd52..4d7b858 100644
>>>>> --- a/arch/arm/boot/dts/Makefile
>>>>> +++ b/arch/arm/boot/dts/Makefile
>>>>> @@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
>>>>>      wm8750-apc8750.dtb \
>>>>>      wm8850-w70v2.dtb
>>>>>  dtb-$(CONFIG_ARCH_ZYNQ) += \
>>>>> +    zynq-microzed.dtb \
>>>>>      zynq-parallella.dtb \
>>>>>      zynq-zc702.dtb \
>>>>>      zynq-zc706.dtb \
>>>>> diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
>>>>> new file mode 100644
>>>>> index 0000000..9e64496
>>>>> --- /dev/null
>>>>> +++ b/arch/arm/boot/dts/zynq-microzed.dts
>>>>> @@ -0,0 +1,95 @@
>>>>> +/*
>>>>> + * Copyright (C) 2015 Jagan Teki <jteki@openedev.com>
>>>
>>>
>>> Did you created only yourself without copying part of this from others?
>>> There is dts in u-boot which I believe you are aware of.
>>
>> I sent the initial one few months back so at that time, I was created
>> and now I just added USB and Ethernet with the reference of zc702
>> board.
>
> Can you send me a link to that post? I didn't find it.

Here is the link [1]

> Anyway you should keep Xilinx copyright there.

OK then will append Xilinx as well.

[1] http://lkml.iu.edu/hypermail/linux/kernel/1601.1/03236.html

thanks!
-- 
Jagan.

^ permalink raw reply	[flat|nested] 18+ messages in thread
* Re: [PATCH v2] arm: dts: zynq: Add MicroZed board support
  2016-09-23  8:42           ` Jagan Teki
@ 2016-09-23  8:54             ` Michal Simek
  -1 siblings, 0 replies; 18+ messages in thread
From: Michal Simek @ 2016-09-23  8:54 UTC (permalink / raw)
  To: Jagan Teki, Michal Simek
  Cc: Sören Brinkmann, linux-arm-kernel, devicetree, linux-kernel

On 23.9.2016 10:42, Jagan Teki wrote:
> On Fri, Sep 23, 2016 at 2:07 PM, Michal Simek <michal.simek@xilinx.com> wrote:
>> On 23.9.2016 09:39, Jagan Teki wrote:
>>> On Fri, Sep 23, 2016 at 11:33 AM, Michal Simek <michal.simek@xilinx.com> wrote:
>>>> On 22.9.2016 22:59, Sören Brinkmann wrote:
>>>>> On Thu, 2016-09-22 at 18:51:29 +0530, Jagan Teki wrote:
>>>>>> From: Jagan Teki <jteki@openedev.com>
>>>>>>
>>>>>> Added basic dts support for MicroZed board.
>>>>>>
>>>>>> - UART
>>>>>> - SDHCI
>>>>>> - Ethernet
>>>>>>
>>>>>> Cc: Soren Brinkmann <soren.brinkmann@xilinx.com>
>>>>>> Cc: Michal Simek <michal.simek@xilinx.com>
>>>>>> Signed-off-by: Jagan Teki <jteki@openedev.com>
>>>>>> ---
>>>>>> Changes for v2:
>>>>>>      - Add SDHCI
>>>>>>      - Add Ethernet
>>>>>>
>>>>>>  arch/arm/boot/dts/Makefile          |  1 +
>>>>>>  arch/arm/boot/dts/zynq-microzed.dts | 95 +++++++++++++++++++++++++++++++++++++
>>>>>>  2 files changed, 96 insertions(+)
>>>>>>  create mode 100644 arch/arm/boot/dts/zynq-microzed.dts
>>>>>>
>>>>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>>>>>> index faacd52..4d7b858 100644
>>>>>> --- a/arch/arm/boot/dts/Makefile
>>>>>> +++ b/arch/arm/boot/dts/Makefile
>>>>>> @@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
>>>>>>      wm8750-apc8750.dtb \
>>>>>>      wm8850-w70v2.dtb
>>>>>>  dtb-$(CONFIG_ARCH_ZYNQ) += \
>>>>>> +    zynq-microzed.dtb \
>>>>>>      zynq-parallella.dtb \
>>>>>>      zynq-zc702.dtb \
>>>>>>      zynq-zc706.dtb \
>>>>>> diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
>>>>>> new file mode 100644
>>>>>> index 0000000..9e64496
>>>>>> --- /dev/null
>>>>>> +++ b/arch/arm/boot/dts/zynq-microzed.dts
>>>>>> @@ -0,0 +1,95 @@
>>>>>> +/*
>>>>>> + * Copyright (C) 2015 Jagan Teki <jteki@openedev.com>
>>>>
>>>>
>>>> Did you created only yourself without copying part of this from others?
>>>> There is dts in u-boot which I believe you are aware of.
>>>
>>> I sent the initial one few months back so at that time, I was created
>>> and now I just added USB and Ethernet with the reference of zc702
>>> board.
>>
>> Can you send me a link to that post? I didn't find it.
> 
> Here is the link [1]
> 
>> Anyway you should keep Xilinx copyright there.
> 
> OK then will append Xilinx as well.
> 
> [1] http://lkml.iu.edu/hypermail/linux/kernel/1601.1/03236.html

ok. It was lkml and devicetree not arm mailing list that's why I didn't
find it.

Thanks,
Michal

^ permalink raw reply	[flat|nested] 18+ messages in thread
* [PATCH v2] arm: dts: zynq: Add MicroZed board support
@ 2016-09-23  8:54             ` Michal Simek
  0 siblings, 0 replies; 18+ messages in thread
From: Michal Simek @ 2016-09-23  8:54 UTC (permalink / raw)
  To: linux-arm-kernel

On 23.9.2016 10:42, Jagan Teki wrote:
> On Fri, Sep 23, 2016 at 2:07 PM, Michal Simek <michal.simek@xilinx.com> wrote:
>> On 23.9.2016 09:39, Jagan Teki wrote:
>>> On Fri, Sep 23, 2016 at 11:33 AM, Michal Simek <michal.simek@xilinx.com> wrote:
>>>> On 22.9.2016 22:59, S?ren Brinkmann wrote:
>>>>> On Thu, 2016-09-22 at 18:51:29 +0530, Jagan Teki wrote:
>>>>>> From: Jagan Teki <jteki@openedev.com>
>>>>>>
>>>>>> Added basic dts support for MicroZed board.
>>>>>>
>>>>>> - UART
>>>>>> - SDHCI
>>>>>> - Ethernet
>>>>>>
>>>>>> Cc: Soren Brinkmann <soren.brinkmann@xilinx.com>
>>>>>> Cc: Michal Simek <michal.simek@xilinx.com>
>>>>>> Signed-off-by: Jagan Teki <jteki@openedev.com>
>>>>>> ---
>>>>>> Changes for v2:
>>>>>>      - Add SDHCI
>>>>>>      - Add Ethernet
>>>>>>
>>>>>>  arch/arm/boot/dts/Makefile          |  1 +
>>>>>>  arch/arm/boot/dts/zynq-microzed.dts | 95 +++++++++++++++++++++++++++++++++++++
>>>>>>  2 files changed, 96 insertions(+)
>>>>>>  create mode 100644 arch/arm/boot/dts/zynq-microzed.dts
>>>>>>
>>>>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>>>>>> index faacd52..4d7b858 100644
>>>>>> --- a/arch/arm/boot/dts/Makefile
>>>>>> +++ b/arch/arm/boot/dts/Makefile
>>>>>> @@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
>>>>>>      wm8750-apc8750.dtb \
>>>>>>      wm8850-w70v2.dtb
>>>>>>  dtb-$(CONFIG_ARCH_ZYNQ) += \
>>>>>> +    zynq-microzed.dtb \
>>>>>>      zynq-parallella.dtb \
>>>>>>      zynq-zc702.dtb \
>>>>>>      zynq-zc706.dtb \
>>>>>> diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
>>>>>> new file mode 100644
>>>>>> index 0000000..9e64496
>>>>>> --- /dev/null
>>>>>> +++ b/arch/arm/boot/dts/zynq-microzed.dts
>>>>>> @@ -0,0 +1,95 @@
>>>>>> +/*
>>>>>> + * Copyright (C) 2015 Jagan Teki <jteki@openedev.com>
>>>>
>>>>
>>>> Did you created only yourself without copying part of this from others?
>>>> There is dts in u-boot which I believe you are aware of.
>>>
>>> I sent the initial one few months back so at that time, I was created
>>> and now I just added USB and Ethernet with the reference of zc702
>>> board.
>>
>> Can you send me a link to that post? I didn't find it.
> 
> Here is the link [1]
> 
>> Anyway you should keep Xilinx copyright there.
> 
> OK then will append Xilinx as well.
> 
> [1] http://lkml.iu.edu/hypermail/linux/kernel/1601.1/03236.html

ok. It was lkml and devicetree not arm mailing list that's why I didn't
find it.

Thanks,
Michal

^ permalink raw reply	[flat|nested] 18+ messages in thread
end of thread, other threads:[~2016-09-23  8:54 UTC | newest]

Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-09-22 13:21 [PATCH v2] arm: dts: zynq: Add MicroZed board support Jagan Teki
2016-09-22 13:21 ` Jagan Teki
2016-09-22 20:59 ` Sören Brinkmann
2016-09-22 20:59   ` Sören Brinkmann
2016-09-22 20:59   ` Sören Brinkmann
2016-09-23  6:03   ` Michal Simek
2016-09-23  6:03     ` Michal Simek
2016-09-23  6:03     ` Michal Simek
2016-09-23  7:39     ` Jagan Teki
2016-09-23  7:39       ` Jagan Teki
2016-09-23  7:39       ` Jagan Teki
2016-09-23  8:37       ` Michal Simek
2016-09-23  8:37         ` Michal Simek
2016-09-23  8:37         ` Michal Simek
2016-09-23  8:42         ` Jagan Teki
2016-09-23  8:42           ` Jagan Teki
2016-09-23  8:54           ` Michal Simek
2016-09-23  8:54             ` Michal Simek

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.