All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v7 0/5] ARM: dts: imx6q: Add Engicam i.CoreM6 dts
@ 2016-10-14  9:27 ` Jagan Teki
  0 siblings, 0 replies; 32+ messages in thread
From: Jagan Teki @ 2016-10-14  9:27 UTC (permalink / raw)
  To: Shawn Guo
  Cc: linux-arm-kernel, devicetree, linux-kernel, Matteo Lisi,
	Michael Trimarchi, Jagan Teki

This is series add dts support for Engicam I.Core M6 qdl modules. just
rebased on top of linux-next of previous set[1].

[1] http://www.spinics.net/lists/kernel/msg2358233.html

Jagan Teki (5):
  ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support
  ARM: dts: imx6q: Add Engicam i.CoreM6 DualLite/Solo initial support
  ARM: dts: imx6qdl-icore: Add usbhost support
  ARM: dts: imx6qdl-icore: Add usbotg support
  ARM: dts: imx6qdl-icore: Add FEC support

 arch/arm/boot/dts/Makefile           |   2 +
 arch/arm/boot/dts/imx6dl-icore.dts   |  59 ++++++++
 arch/arm/boot/dts/imx6q-icore.dts    |  59 ++++++++
 arch/arm/boot/dts/imx6qdl-icore.dtsi | 271 +++++++++++++++++++++++++++++++++++
 4 files changed, 391 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6dl-icore.dts
 create mode 100644 arch/arm/boot/dts/imx6q-icore.dts
 create mode 100644 arch/arm/boot/dts/imx6qdl-icore.dtsi

-- 
2.7.4

^ permalink raw reply	[flat|nested] 32+ messages in thread
* [PATCH v7 0/5] ARM: dts: imx6q: Add Engicam i.CoreM6 dts
@ 2016-10-14  9:27 ` Jagan Teki
  0 siblings, 0 replies; 32+ messages in thread
From: Jagan Teki @ 2016-10-14  9:27 UTC (permalink / raw)
  To: Shawn Guo
  Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA, Matteo Lisi,
	Michael Trimarchi, Jagan Teki

This is series add dts support for Engicam I.Core M6 qdl modules. just
rebased on top of linux-next of previous set[1].

[1] http://www.spinics.net/lists/kernel/msg2358233.html

Jagan Teki (5):
  ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support
  ARM: dts: imx6q: Add Engicam i.CoreM6 DualLite/Solo initial support
  ARM: dts: imx6qdl-icore: Add usbhost support
  ARM: dts: imx6qdl-icore: Add usbotg support
  ARM: dts: imx6qdl-icore: Add FEC support

 arch/arm/boot/dts/Makefile           |   2 +
 arch/arm/boot/dts/imx6dl-icore.dts   |  59 ++++++++
 arch/arm/boot/dts/imx6q-icore.dts    |  59 ++++++++
 arch/arm/boot/dts/imx6qdl-icore.dtsi | 271 +++++++++++++++++++++++++++++++++++
 4 files changed, 391 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6dl-icore.dts
 create mode 100644 arch/arm/boot/dts/imx6q-icore.dts
 create mode 100644 arch/arm/boot/dts/imx6qdl-icore.dtsi

-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 32+ messages in thread
* [PATCH v7 0/5] ARM: dts: imx6q: Add Engicam i.CoreM6 dts
@ 2016-10-14  9:27 ` Jagan Teki
  0 siblings, 0 replies; 32+ messages in thread
From: Jagan Teki @ 2016-10-14  9:27 UTC (permalink / raw)
  To: linux-arm-kernel

This is series add dts support for Engicam I.Core M6 qdl modules. just
rebased on top of linux-next of previous set[1].

[1] http://www.spinics.net/lists/kernel/msg2358233.html

Jagan Teki (5):
  ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support
  ARM: dts: imx6q: Add Engicam i.CoreM6 DualLite/Solo initial support
  ARM: dts: imx6qdl-icore: Add usbhost support
  ARM: dts: imx6qdl-icore: Add usbotg support
  ARM: dts: imx6qdl-icore: Add FEC support

 arch/arm/boot/dts/Makefile           |   2 +
 arch/arm/boot/dts/imx6dl-icore.dts   |  59 ++++++++
 arch/arm/boot/dts/imx6q-icore.dts    |  59 ++++++++
 arch/arm/boot/dts/imx6qdl-icore.dtsi | 271 +++++++++++++++++++++++++++++++++++
 4 files changed, 391 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6dl-icore.dts
 create mode 100644 arch/arm/boot/dts/imx6q-icore.dts
 create mode 100644 arch/arm/boot/dts/imx6qdl-icore.dtsi

-- 
2.7.4

^ permalink raw reply	[flat|nested] 32+ messages in thread
* [PATCH v7 1/5] ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support
@ 2016-10-14  9:27   ` Jagan Teki
  0 siblings, 0 replies; 32+ messages in thread
From: Jagan Teki @ 2016-10-14  9:27 UTC (permalink / raw)
  To: Shawn Guo
  Cc: linux-arm-kernel, devicetree, linux-kernel, Matteo Lisi,
	Michael Trimarchi, Jagan Teki, Sascha Hauer, Fabio Estevam

From: Jagan Teki <jagan@amarulasolutions.com>

i.CoreM6 Quad/Dual modules are system on module solutions manufactured
by Engicam with following characteristics:
CPU           NXP i.MX6 DQ, 800MHz
RAM           1GB, 32, 64 bit, DDR3-800/1066
NAND          SLC,512MB
Power supply  Single 5V
MAX LCD RES   FULLHD

and more info at
http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q

Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v7:
        - none
Changes for v6:
        - none
Changes for v5:
        - removed fsl,legacy-bch-geometry property from gpmi node
Changes for v4:
        - new patch
Changes for v3:
        - Use compatible as engicam,imx6-icore instead of fsl,imx6-icore
        - Update IOMUX value for can1 and can2 nodes
        - Added reg_3p3v for can1 and can2 nodes
Changes for v2:
        - s/oaky/okay/g

 arch/arm/boot/dts/Makefile           |   1 +
 arch/arm/boot/dts/imx6q-icore.dts    |  59 +++++++++++
 arch/arm/boot/dts/imx6qdl-icore.dtsi | 196 +++++++++++++++++++++++++++++++++++
 3 files changed, 256 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6q-icore.dts
 create mode 100644 arch/arm/boot/dts/imx6qdl-icore.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index befcd26..89a3eea 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -381,6 +381,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-gw553x.dtb \
 	imx6q-h100.dtb \
 	imx6q-hummingboard.dtb \
+	imx6q-icore.dtb \
 	imx6q-icore-rqs.dtb \
 	imx6q-marsboard.dtb \
 	imx6q-nitrogen6x.dtb \
diff --git a/arch/arm/boot/dts/imx6q-icore.dts b/arch/arm/boot/dts/imx6q-icore.dts
new file mode 100644
index 0000000..025f543
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-icore.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 Quad/Dual Starter Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6q";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
new file mode 100644
index 0000000..f424cd5
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -0,0 +1,196 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3p3v>;
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_3p3v>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b020
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b020
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpmi-nand {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS      0x00b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL  0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x130b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17070
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10070
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17070
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17070
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17070
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17070
+		>;
+	};
+};
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 32+ messages in thread
* [PATCH v7 1/5] ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support
@ 2016-10-14  9:27   ` Jagan Teki
  0 siblings, 0 replies; 32+ messages in thread
From: Jagan Teki @ 2016-10-14  9:27 UTC (permalink / raw)
  To: Shawn Guo
  Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA, Matteo Lisi,
	Michael Trimarchi, Jagan Teki, Sascha Hauer, Fabio Estevam

From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>

i.CoreM6 Quad/Dual modules are system on module solutions manufactured
by Engicam with following characteristics:
CPU           NXP i.MX6 DQ, 800MHz
RAM           1GB, 32, 64 bit, DDR3-800/1066
NAND          SLC,512MB
Power supply  Single 5V
MAX LCD RES   FULLHD

and more info at
http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q

Cc: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>
Cc: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Matteo Lisi <matteo.lisi-4s7YQHO/iPVBDgjK7y7TUQ@public.gmane.org>
Cc: Michael Trimarchi <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
Changes for v7:
        - none
Changes for v6:
        - none
Changes for v5:
        - removed fsl,legacy-bch-geometry property from gpmi node
Changes for v4:
        - new patch
Changes for v3:
        - Use compatible as engicam,imx6-icore instead of fsl,imx6-icore
        - Update IOMUX value for can1 and can2 nodes
        - Added reg_3p3v for can1 and can2 nodes
Changes for v2:
        - s/oaky/okay/g

 arch/arm/boot/dts/Makefile           |   1 +
 arch/arm/boot/dts/imx6q-icore.dts    |  59 +++++++++++
 arch/arm/boot/dts/imx6qdl-icore.dtsi | 196 +++++++++++++++++++++++++++++++++++
 3 files changed, 256 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6q-icore.dts
 create mode 100644 arch/arm/boot/dts/imx6qdl-icore.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index befcd26..89a3eea 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -381,6 +381,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-gw553x.dtb \
 	imx6q-h100.dtb \
 	imx6q-hummingboard.dtb \
+	imx6q-icore.dtb \
 	imx6q-icore-rqs.dtb \
 	imx6q-marsboard.dtb \
 	imx6q-nitrogen6x.dtb \
diff --git a/arch/arm/boot/dts/imx6q-icore.dts b/arch/arm/boot/dts/imx6q-icore.dts
new file mode 100644
index 0000000..025f543
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-icore.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 Quad/Dual Starter Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6q";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
new file mode 100644
index 0000000..f424cd5
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -0,0 +1,196 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3p3v>;
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_3p3v>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b020
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b020
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpmi-nand {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS      0x00b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL  0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x130b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17070
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10070
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17070
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17070
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17070
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17070
+		>;
+	};
+};
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 32+ messages in thread
* [PATCH v7 1/5] ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support
@ 2016-10-14  9:27   ` Jagan Teki
  0 siblings, 0 replies; 32+ messages in thread
From: Jagan Teki @ 2016-10-14  9:27 UTC (permalink / raw)
  To: linux-arm-kernel

From: Jagan Teki <jagan@amarulasolutions.com>

i.CoreM6 Quad/Dual modules are system on module solutions manufactured
by Engicam with following characteristics:
CPU           NXP i.MX6 DQ, 800MHz
RAM           1GB, 32, 64 bit, DDR3-800/1066
NAND          SLC,512MB
Power supply  Single 5V
MAX LCD RES   FULLHD

and more info at
http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q

Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v7:
        - none
Changes for v6:
        - none
Changes for v5:
        - removed fsl,legacy-bch-geometry property from gpmi node
Changes for v4:
        - new patch
Changes for v3:
        - Use compatible as engicam,imx6-icore instead of fsl,imx6-icore
        - Update IOMUX value for can1 and can2 nodes
        - Added reg_3p3v for can1 and can2 nodes
Changes for v2:
        - s/oaky/okay/g

 arch/arm/boot/dts/Makefile           |   1 +
 arch/arm/boot/dts/imx6q-icore.dts    |  59 +++++++++++
 arch/arm/boot/dts/imx6qdl-icore.dtsi | 196 +++++++++++++++++++++++++++++++++++
 3 files changed, 256 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6q-icore.dts
 create mode 100644 arch/arm/boot/dts/imx6qdl-icore.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index befcd26..89a3eea 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -381,6 +381,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-gw553x.dtb \
 	imx6q-h100.dtb \
 	imx6q-hummingboard.dtb \
+	imx6q-icore.dtb \
 	imx6q-icore-rqs.dtb \
 	imx6q-marsboard.dtb \
 	imx6q-nitrogen6x.dtb \
diff --git a/arch/arm/boot/dts/imx6q-icore.dts b/arch/arm/boot/dts/imx6q-icore.dts
new file mode 100644
index 0000000..025f543
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-icore.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 Quad/Dual Starter Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6q";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
new file mode 100644
index 0000000..f424cd5
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -0,0 +1,196 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3p3v>;
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_3p3v>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b020
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b020
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpmi-nand {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS      0x00b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL  0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x130b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17070
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10070
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17070
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17070
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17070
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17070
+		>;
+	};
+};
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 32+ messages in thread
* [PATCH v7 2/5] ARM: dts: imx6q: Add Engicam i.CoreM6 DualLite/Solo initial support
@ 2016-10-14  9:27   ` Jagan Teki
  0 siblings, 0 replies; 32+ messages in thread
From: Jagan Teki @ 2016-10-14  9:27 UTC (permalink / raw)
  To: Shawn Guo
  Cc: linux-arm-kernel, devicetree, linux-kernel, Matteo Lisi,
	Michael Trimarchi, Jagan Teki, Sascha Hauer, Fabio Estevam

From: Jagan Teki <jagan@amarulasolutions.com>

i.CoreM6 DualLite/Solo modules are system on module solutions manufactured
by Engicam with following characteristics:
CPU           NXP i.MX6 DL, 800MHz
RAM           1GB, 32, 64 bit, DDR3-800/1066
NAND          SLC,512MB
Power supply  Single 5V
MAX LCD RES   FULLHD

and more info at
http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q

Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v7:
        - none
Changes for v6:
        - none
Changes for v5:
        - none
Changes for v4:
        - new patch
Changes for v3:
        - Use compatible as engicam,imx6-icore instead of fsl,imx6-icore
Changes for v2:
        - s/oaky/okay/g

 arch/arm/boot/dts/Makefile         |  1 +
 arch/arm/boot/dts/imx6dl-icore.dts | 59 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 60 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6dl-icore.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 89a3eea..8f8b14b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -340,6 +340,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-gw552x.dtb \
 	imx6dl-gw553x.dtb \
 	imx6dl-hummingboard.dtb \
+	imx6dl-icore.dtb \
 	imx6dl-nit6xlite.dtb \
 	imx6dl-nitrogen6x.dtb \
 	imx6dl-phytec-pbab01.dtb \
diff --git a/arch/arm/boot/dts/imx6dl-icore.dts b/arch/arm/boot/dts/imx6dl-icore.dts
new file mode 100644
index 0000000..aec332c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-icore.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 DualLite/Solo Starter Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6dl";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 32+ messages in thread
* [PATCH v7 2/5] ARM: dts: imx6q: Add Engicam i.CoreM6 DualLite/Solo initial support
@ 2016-10-14  9:27   ` Jagan Teki
  0 siblings, 0 replies; 32+ messages in thread
From: Jagan Teki @ 2016-10-14  9:27 UTC (permalink / raw)
  To: Shawn Guo
  Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA, Matteo Lisi,
	Michael Trimarchi, Jagan Teki, Sascha Hauer, Fabio Estevam

From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>

i.CoreM6 DualLite/Solo modules are system on module solutions manufactured
by Engicam with following characteristics:
CPU           NXP i.MX6 DL, 800MHz
RAM           1GB, 32, 64 bit, DDR3-800/1066
NAND          SLC,512MB
Power supply  Single 5V
MAX LCD RES   FULLHD

and more info at
http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q

Cc: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>
Cc: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Matteo Lisi <matteo.lisi-4s7YQHO/iPVBDgjK7y7TUQ@public.gmane.org>
Cc: Michael Trimarchi <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
Changes for v7:
        - none
Changes for v6:
        - none
Changes for v5:
        - none
Changes for v4:
        - new patch
Changes for v3:
        - Use compatible as engicam,imx6-icore instead of fsl,imx6-icore
Changes for v2:
        - s/oaky/okay/g

 arch/arm/boot/dts/Makefile         |  1 +
 arch/arm/boot/dts/imx6dl-icore.dts | 59 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 60 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6dl-icore.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 89a3eea..8f8b14b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -340,6 +340,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-gw552x.dtb \
 	imx6dl-gw553x.dtb \
 	imx6dl-hummingboard.dtb \
+	imx6dl-icore.dtb \
 	imx6dl-nit6xlite.dtb \
 	imx6dl-nitrogen6x.dtb \
 	imx6dl-phytec-pbab01.dtb \
diff --git a/arch/arm/boot/dts/imx6dl-icore.dts b/arch/arm/boot/dts/imx6dl-icore.dts
new file mode 100644
index 0000000..aec332c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-icore.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 DualLite/Solo Starter Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6dl";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 32+ messages in thread
* [PATCH v7 2/5] ARM: dts: imx6q: Add Engicam i.CoreM6 DualLite/Solo initial support
@ 2016-10-14  9:27   ` Jagan Teki
  0 siblings, 0 replies; 32+ messages in thread
From: Jagan Teki @ 2016-10-14  9:27 UTC (permalink / raw)
  To: linux-arm-kernel

From: Jagan Teki <jagan@amarulasolutions.com>

i.CoreM6 DualLite/Solo modules are system on module solutions manufactured
by Engicam with following characteristics:
CPU           NXP i.MX6 DL, 800MHz
RAM           1GB, 32, 64 bit, DDR3-800/1066
NAND          SLC,512MB
Power supply  Single 5V
MAX LCD RES   FULLHD

and more info at
http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q

Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v7:
        - none
Changes for v6:
        - none
Changes for v5:
        - none
Changes for v4:
        - new patch
Changes for v3:
        - Use compatible as engicam,imx6-icore instead of fsl,imx6-icore
Changes for v2:
        - s/oaky/okay/g

 arch/arm/boot/dts/Makefile         |  1 +
 arch/arm/boot/dts/imx6dl-icore.dts | 59 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 60 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6dl-icore.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 89a3eea..8f8b14b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -340,6 +340,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-gw552x.dtb \
 	imx6dl-gw553x.dtb \
 	imx6dl-hummingboard.dtb \
+	imx6dl-icore.dtb \
 	imx6dl-nit6xlite.dtb \
 	imx6dl-nitrogen6x.dtb \
 	imx6dl-phytec-pbab01.dtb \
diff --git a/arch/arm/boot/dts/imx6dl-icore.dts b/arch/arm/boot/dts/imx6dl-icore.dts
new file mode 100644
index 0000000..aec332c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-icore.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 DualLite/Solo Starter Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6dl";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 32+ messages in thread
* [PATCH v7 3/5] ARM: dts: imx6qdl-icore: Add usbhost support
  2016-10-14  9:27 ` Jagan Teki
@ 2016-10-14  9:27   ` Jagan Teki
  -1 siblings, 0 replies; 32+ messages in thread
From: Jagan Teki @ 2016-10-14  9:27 UTC (permalink / raw)
  To: Shawn Guo
  Cc: linux-arm-kernel, devicetree, linux-kernel, Matteo Lisi,
	Michael Trimarchi, Jagan Teki, Sascha Hauer, Fabio Estevam

From: Jagan Teki <jagan@amarulasolutions.com>

Add usbhost support for Engicam i.CoreM6 dql modules.

Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v7:
        - none
Changes for v6:
        - none
Changes for v5:
        - none
Changes for v4:
        - new patch

 arch/arm/boot/dts/imx6qdl-icore.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index f424cd5..ffec879 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -56,6 +56,15 @@
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	reg_usb_h1_vbus: usb_h1_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &can1 {
@@ -109,6 +118,12 @@
 	status = "okay";
 };
 
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	disable-over-current;
+	status = "okay";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 32+ messages in thread
* [PATCH v7 3/5] ARM: dts: imx6qdl-icore: Add usbhost support
@ 2016-10-14  9:27   ` Jagan Teki
  0 siblings, 0 replies; 32+ messages in thread
From: Jagan Teki @ 2016-10-14  9:27 UTC (permalink / raw)
  To: linux-arm-kernel

From: Jagan Teki <jagan@amarulasolutions.com>

Add usbhost support for Engicam i.CoreM6 dql modules.

Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v7:
        - none
Changes for v6:
        - none
Changes for v5:
        - none
Changes for v4:
        - new patch

 arch/arm/boot/dts/imx6qdl-icore.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index f424cd5..ffec879 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -56,6 +56,15 @@
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	reg_usb_h1_vbus: usb_h1_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &can1 {
@@ -109,6 +118,12 @@
 	status = "okay";
 };
 
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	disable-over-current;
+	status = "okay";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 32+ messages in thread
* [PATCH v7 4/5] ARM: dts: imx6qdl-icore: Add usbotg support
  2016-10-14  9:27 ` Jagan Teki
@ 2016-10-14  9:27   ` Jagan Teki
  -1 siblings, 0 replies; 32+ messages in thread
From: Jagan Teki @ 2016-10-14  9:27 UTC (permalink / raw)
  To: Shawn Guo
  Cc: linux-arm-kernel, devicetree, linux-kernel, Matteo Lisi,
	Michael Trimarchi, Jagan Teki, Sascha Hauer, Fabio Estevam

From: Jagan Teki <jagan@amarulasolutions.com>

Add usbotg support for Engicam i.CoreM6 dql modules.

Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v7:
        - none
Changes for v6:
        - none
Changes for v5:
        - none
Changes for v4:
        - new patch

 arch/arm/boot/dts/imx6qdl-icore.dtsi | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index ffec879..4e79858 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -65,6 +65,15 @@
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	reg_usb_otg_vbus: usb_otg_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &can1 {
@@ -124,6 +133,14 @@
 	status = "okay";
 };
 
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
@@ -198,6 +215,12 @@
 		>;
 	};
 
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+		>;
+	};
+
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17070
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 32+ messages in thread
* [PATCH v7 4/5] ARM: dts: imx6qdl-icore: Add usbotg support
@ 2016-10-14  9:27   ` Jagan Teki
  0 siblings, 0 replies; 32+ messages in thread
From: Jagan Teki @ 2016-10-14  9:27 UTC (permalink / raw)
  To: linux-arm-kernel

From: Jagan Teki <jagan@amarulasolutions.com>

Add usbotg support for Engicam i.CoreM6 dql modules.

Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v7:
        - none
Changes for v6:
        - none
Changes for v5:
        - none
Changes for v4:
        - new patch

 arch/arm/boot/dts/imx6qdl-icore.dtsi | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index ffec879..4e79858 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -65,6 +65,15 @@
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	reg_usb_otg_vbus: usb_otg_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &can1 {
@@ -124,6 +133,14 @@
 	status = "okay";
 };
 
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
@@ -198,6 +215,12 @@
 		>;
 	};
 
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+		>;
+	};
+
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17070
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 32+ messages in thread
* [PATCH v7 5/5] ARM: dts: imx6qdl-icore: Add FEC support
@ 2016-10-14  9:27   ` Jagan Teki
  0 siblings, 0 replies; 32+ messages in thread
From: Jagan Teki @ 2016-10-14  9:27 UTC (permalink / raw)
  To: Shawn Guo
  Cc: linux-arm-kernel, devicetree, linux-kernel, Matteo Lisi,
	Michael Trimarchi, Jagan Teki, Sascha Hauer, Fabio Estevam

From: Jagan Teki <jagan@amarulasolutions.com>

Add FEC support for Engicam i.CoreM6 dql modules.

Observed similar 'eth0: link is not ready' issue which was
discussed in [1] due rmii mode with external ref_clk, so added
clock node along with the properties mentioned by Shawn in [2]

FEC link log:
------------
$ ifconfig eth0 up
[   27.905187] SMSC LAN8710/LAN8720 2188000.ethernet:00: attached PHY driver
               [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=2188000.ethernet:00, irq=-1)
[   27.918982] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[1] https://patchwork.kernel.org/patch/3491061/
[2] https://patchwork.kernel.org/patch/3490511/

Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v7:
        - none
Changes for v6:
        - none
Changes for v5:
        - new patch

 arch/arm/boot/dts/imx6qdl-icore.dtsi | 37 ++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index 4e79858..972f48f 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -48,6 +48,18 @@
 		reg = <0x10000000 0x80000000>;
 	};
 
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmii_clk: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;  /* 25MHz for example */
+		};
+	};
+
 	reg_3p3v: regulator-3p3v {
 		compatible = "regulator-fixed";
 		regulator-name = "3P3V";
@@ -93,6 +105,15 @@
 	assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
 };
 
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	clocks = <&clks 117>, <&clks 117>, <&rmii_clk>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
 &gpmi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpmi_nand>;
@@ -150,6 +171,22 @@
 };
 
 &iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b0b1
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b0
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+		>;
+	};
+
 	pinctrl_flexcan1: flexcan1grp {
 		fsl,pins = <
 			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 32+ messages in thread
* [PATCH v7 5/5] ARM: dts: imx6qdl-icore: Add FEC support
@ 2016-10-14  9:27   ` Jagan Teki
  0 siblings, 0 replies; 32+ messages in thread
From: Jagan Teki @ 2016-10-14  9:27 UTC (permalink / raw)
  To: Shawn Guo
  Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA, Matteo Lisi,
	Michael Trimarchi, Jagan Teki, Sascha Hauer, Fabio Estevam

From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>

Add FEC support for Engicam i.CoreM6 dql modules.

Observed similar 'eth0: link is not ready' issue which was
discussed in [1] due rmii mode with external ref_clk, so added
clock node along with the properties mentioned by Shawn in [2]

FEC link log:
------------
$ ifconfig eth0 up
[   27.905187] SMSC LAN8710/LAN8720 2188000.ethernet:00: attached PHY driver
               [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=2188000.ethernet:00, irq=-1)
[   27.918982] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[1] https://patchwork.kernel.org/patch/3491061/
[2] https://patchwork.kernel.org/patch/3490511/

Cc: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>
Cc: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Matteo Lisi <matteo.lisi-4s7YQHO/iPVBDgjK7y7TUQ@public.gmane.org>
Cc: Michael Trimarchi <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
Changes for v7:
        - none
Changes for v6:
        - none
Changes for v5:
        - new patch

 arch/arm/boot/dts/imx6qdl-icore.dtsi | 37 ++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index 4e79858..972f48f 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -48,6 +48,18 @@
 		reg = <0x10000000 0x80000000>;
 	};
 
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmii_clk: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;  /* 25MHz for example */
+		};
+	};
+
 	reg_3p3v: regulator-3p3v {
 		compatible = "regulator-fixed";
 		regulator-name = "3P3V";
@@ -93,6 +105,15 @@
 	assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
 };
 
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	clocks = <&clks 117>, <&clks 117>, <&rmii_clk>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
 &gpmi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpmi_nand>;
@@ -150,6 +171,22 @@
 };
 
 &iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b0b1
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b0
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+		>;
+	};
+
 	pinctrl_flexcan1: flexcan1grp {
 		fsl,pins = <
 			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 32+ messages in thread
* [PATCH v7 5/5] ARM: dts: imx6qdl-icore: Add FEC support
@ 2016-10-14  9:27   ` Jagan Teki
  0 siblings, 0 replies; 32+ messages in thread
From: Jagan Teki @ 2016-10-14  9:27 UTC (permalink / raw)
  To: linux-arm-kernel

From: Jagan Teki <jagan@amarulasolutions.com>

Add FEC support for Engicam i.CoreM6 dql modules.

Observed similar 'eth0: link is not ready' issue which was
discussed in [1] due rmii mode with external ref_clk, so added
clock node along with the properties mentioned by Shawn in [2]

FEC link log:
------------
$ ifconfig eth0 up
[   27.905187] SMSC LAN8710/LAN8720 2188000.ethernet:00: attached PHY driver
               [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=2188000.ethernet:00, irq=-1)
[   27.918982] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[1] https://patchwork.kernel.org/patch/3491061/
[2] https://patchwork.kernel.org/patch/3490511/

Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v7:
        - none
Changes for v6:
        - none
Changes for v5:
        - new patch

 arch/arm/boot/dts/imx6qdl-icore.dtsi | 37 ++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index 4e79858..972f48f 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -48,6 +48,18 @@
 		reg = <0x10000000 0x80000000>;
 	};
 
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmii_clk: clock at 0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;  /* 25MHz for example */
+		};
+	};
+
 	reg_3p3v: regulator-3p3v {
 		compatible = "regulator-fixed";
 		regulator-name = "3P3V";
@@ -93,6 +105,15 @@
 	assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
 };
 
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	clocks = <&clks 117>, <&clks 117>, <&rmii_clk>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
 &gpmi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpmi_nand>;
@@ -150,6 +171,22 @@
 };
 
 &iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b0b1
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b0
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+		>;
+	};
+
 	pinctrl_flexcan1: flexcan1grp {
 		fsl,pins = <
 			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 32+ messages in thread
* Re: [PATCH v7 0/5] ARM: dts: imx6q: Add Engicam i.CoreM6 dts
  2016-10-14  9:27 ` Jagan Teki
  (?)
@ 2016-10-18 12:00   ` Jagan Teki
  -1 siblings, 0 replies; 32+ messages in thread
From: Jagan Teki @ 2016-10-18 12:00 UTC (permalink / raw)
  To: Shawn Guo
  Cc: linux-arm-kernel, devicetree, linux-kernel, Matteo Lisi,
	Michael Trimarchi, Jagan Teki

Hi Shawn,

On Fri, Oct 14, 2016 at 2:57 PM, Jagan Teki <jteki@openedev.com> wrote:
> This is series add dts support for Engicam I.Core M6 qdl modules. just
> rebased on top of linux-next of previous set[1].
>
> [1] http://www.spinics.net/lists/kernel/msg2358233.html
>
> Jagan Teki (5):
>   ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support
>   ARM: dts: imx6q: Add Engicam i.CoreM6 DualLite/Solo initial support
>   ARM: dts: imx6qdl-icore: Add usbhost support
>   ARM: dts: imx6qdl-icore: Add usbotg support
>   ARM: dts: imx6qdl-icore: Add FEC support
>
>  arch/arm/boot/dts/Makefile           |   2 +
>  arch/arm/boot/dts/imx6dl-icore.dts   |  59 ++++++++
>  arch/arm/boot/dts/imx6q-icore.dts    |  59 ++++++++
>  arch/arm/boot/dts/imx6qdl-icore.dtsi | 271 +++++++++++++++++++++++++++++++++++
>  4 files changed, 391 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6dl-icore.dts
>  create mode 100644 arch/arm/boot/dts/imx6q-icore.dts
>  create mode 100644 arch/arm/boot/dts/imx6qdl-icore.dtsi

Can you pick this series?

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.

^ permalink raw reply	[flat|nested] 32+ messages in thread
* Re: [PATCH v7 0/5] ARM: dts: imx6q: Add Engicam i.CoreM6 dts
@ 2016-10-18 12:00   ` Jagan Teki
  0 siblings, 0 replies; 32+ messages in thread
From: Jagan Teki @ 2016-10-18 12:00 UTC (permalink / raw)
  To: Shawn Guo
  Cc: devicetree, Matteo Lisi, linux-kernel, Jagan Teki,
	Michael Trimarchi, linux-arm-kernel

Hi Shawn,

On Fri, Oct 14, 2016 at 2:57 PM, Jagan Teki <jteki@openedev.com> wrote:
> This is series add dts support for Engicam I.Core M6 qdl modules. just
> rebased on top of linux-next of previous set[1].
>
> [1] http://www.spinics.net/lists/kernel/msg2358233.html
>
> Jagan Teki (5):
>   ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support
>   ARM: dts: imx6q: Add Engicam i.CoreM6 DualLite/Solo initial support
>   ARM: dts: imx6qdl-icore: Add usbhost support
>   ARM: dts: imx6qdl-icore: Add usbotg support
>   ARM: dts: imx6qdl-icore: Add FEC support
>
>  arch/arm/boot/dts/Makefile           |   2 +
>  arch/arm/boot/dts/imx6dl-icore.dts   |  59 ++++++++
>  arch/arm/boot/dts/imx6q-icore.dts    |  59 ++++++++
>  arch/arm/boot/dts/imx6qdl-icore.dtsi | 271 +++++++++++++++++++++++++++++++++++
>  4 files changed, 391 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6dl-icore.dts
>  create mode 100644 arch/arm/boot/dts/imx6q-icore.dts
>  create mode 100644 arch/arm/boot/dts/imx6qdl-icore.dtsi

Can you pick this series?

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.

^ permalink raw reply	[flat|nested] 32+ messages in thread
* [PATCH v7 0/5] ARM: dts: imx6q: Add Engicam i.CoreM6 dts
@ 2016-10-18 12:00   ` Jagan Teki
  0 siblings, 0 replies; 32+ messages in thread
From: Jagan Teki @ 2016-10-18 12:00 UTC (permalink / raw)
  To: linux-arm-kernel

Hi Shawn,

On Fri, Oct 14, 2016 at 2:57 PM, Jagan Teki <jteki@openedev.com> wrote:
> This is series add dts support for Engicam I.Core M6 qdl modules. just
> rebased on top of linux-next of previous set[1].
>
> [1] http://www.spinics.net/lists/kernel/msg2358233.html
>
> Jagan Teki (5):
>   ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support
>   ARM: dts: imx6q: Add Engicam i.CoreM6 DualLite/Solo initial support
>   ARM: dts: imx6qdl-icore: Add usbhost support
>   ARM: dts: imx6qdl-icore: Add usbotg support
>   ARM: dts: imx6qdl-icore: Add FEC support
>
>  arch/arm/boot/dts/Makefile           |   2 +
>  arch/arm/boot/dts/imx6dl-icore.dts   |  59 ++++++++
>  arch/arm/boot/dts/imx6q-icore.dts    |  59 ++++++++
>  arch/arm/boot/dts/imx6qdl-icore.dtsi | 271 +++++++++++++++++++++++++++++++++++
>  4 files changed, 391 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6dl-icore.dts
>  create mode 100644 arch/arm/boot/dts/imx6q-icore.dts
>  create mode 100644 arch/arm/boot/dts/imx6qdl-icore.dtsi

Can you pick this series?

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.

^ permalink raw reply	[flat|nested] 32+ messages in thread
* Re: [PATCH v7 3/5] ARM: dts: imx6qdl-icore: Add usbhost support
  2016-10-14  9:27   ` Jagan Teki
@ 2016-10-21  1:21     ` Shawn Guo
  -1 siblings, 0 replies; 32+ messages in thread
From: Shawn Guo @ 2016-10-21  1:21 UTC (permalink / raw)
  To: Jagan Teki
  Cc: linux-arm-kernel, devicetree, linux-kernel, Matteo Lisi,
	Michael Trimarchi, Jagan Teki, Sascha Hauer, Fabio Estevam

On Fri, Oct 14, 2016 at 02:57:21PM +0530, Jagan Teki wrote:
> From: Jagan Teki <jagan@amarulasolutions.com>
> 
> Add usbhost support for Engicam i.CoreM6 dql modules.
> 
> Cc: Sascha Hauer <kernel@pengutronix.de>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Matteo Lisi <matteo.lisi@engicam.com>
> Cc: Michael Trimarchi <michael@amarulasolutions.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v7:
>         - none
> Changes for v6:
>         - none
> Changes for v5:
>         - none
> Changes for v4:
>         - new patch
> 
>  arch/arm/boot/dts/imx6qdl-icore.dtsi | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
> index f424cd5..ffec879 100644
> --- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
> @@ -56,6 +56,15 @@
>  		regulator-boot-on;
>  		regulator-always-on;
>  	};
> +
> +	reg_usb_h1_vbus: usb_h1_vbus {

Hyphen instead of underscore should be used in node name.  Also please
name fixed regulator in the following schema:

        reg_xxx: regulator-xxx {
                ...
        };

Shawn

> +		compatible = "regulator-fixed";
> +		regulator-name = "usb_h1_vbus";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +	};
>  };
>  
>  &can1 {
> @@ -109,6 +118,12 @@
>  	status = "okay";
>  };
>  
> +&usbh1 {
> +	vbus-supply = <&reg_usb_h1_vbus>;
> +	disable-over-current;
> +	status = "okay";
> +};
> +
>  &usdhc1 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_usdhc1>;
> -- 
> 2.7.4
> 

^ permalink raw reply	[flat|nested] 32+ messages in thread
* [PATCH v7 3/5] ARM: dts: imx6qdl-icore: Add usbhost support
@ 2016-10-21  1:21     ` Shawn Guo
  0 siblings, 0 replies; 32+ messages in thread
From: Shawn Guo @ 2016-10-21  1:21 UTC (permalink / raw)
  To: linux-arm-kernel

On Fri, Oct 14, 2016 at 02:57:21PM +0530, Jagan Teki wrote:
> From: Jagan Teki <jagan@amarulasolutions.com>
> 
> Add usbhost support for Engicam i.CoreM6 dql modules.
> 
> Cc: Sascha Hauer <kernel@pengutronix.de>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Matteo Lisi <matteo.lisi@engicam.com>
> Cc: Michael Trimarchi <michael@amarulasolutions.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v7:
>         - none
> Changes for v6:
>         - none
> Changes for v5:
>         - none
> Changes for v4:
>         - new patch
> 
>  arch/arm/boot/dts/imx6qdl-icore.dtsi | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
> index f424cd5..ffec879 100644
> --- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
> @@ -56,6 +56,15 @@
>  		regulator-boot-on;
>  		regulator-always-on;
>  	};
> +
> +	reg_usb_h1_vbus: usb_h1_vbus {

Hyphen instead of underscore should be used in node name.  Also please
name fixed regulator in the following schema:

        reg_xxx: regulator-xxx {
                ...
        };

Shawn

> +		compatible = "regulator-fixed";
> +		regulator-name = "usb_h1_vbus";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +	};
>  };
>  
>  &can1 {
> @@ -109,6 +118,12 @@
>  	status = "okay";
>  };
>  
> +&usbh1 {
> +	vbus-supply = <&reg_usb_h1_vbus>;
> +	disable-over-current;
> +	status = "okay";
> +};
> +
>  &usdhc1 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_usdhc1>;
> -- 
> 2.7.4
> 

^ permalink raw reply	[flat|nested] 32+ messages in thread
* Re: [PATCH v7 4/5] ARM: dts: imx6qdl-icore: Add usbotg support
@ 2016-10-21  1:25     ` Shawn Guo
  0 siblings, 0 replies; 32+ messages in thread
From: Shawn Guo @ 2016-10-21  1:25 UTC (permalink / raw)
  To: Jagan Teki
  Cc: linux-arm-kernel, devicetree, linux-kernel, Matteo Lisi,
	Michael Trimarchi, Jagan Teki, Sascha Hauer, Fabio Estevam

On Fri, Oct 14, 2016 at 02:57:22PM +0530, Jagan Teki wrote:
> From: Jagan Teki <jagan@amarulasolutions.com>
> 
> Add usbotg support for Engicam i.CoreM6 dql modules.
> 
> Cc: Sascha Hauer <kernel@pengutronix.de>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Matteo Lisi <matteo.lisi@engicam.com>
> Cc: Michael Trimarchi <michael@amarulasolutions.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v7:
>         - none
> Changes for v6:
>         - none
> Changes for v5:
>         - none
> Changes for v4:
>         - new patch
> 
>  arch/arm/boot/dts/imx6qdl-icore.dtsi | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
> index ffec879..4e79858 100644
> --- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
> @@ -65,6 +65,15 @@
>  		regulator-boot-on;
>  		regulator-always-on;
>  	};
> +
> +	reg_usb_otg_vbus: usb_otg_vbus {

Same as host patch, please fix the node name.

Shawn

> +		compatible = "regulator-fixed";
> +		regulator-name = "usb_otg_vbus";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +	};
>  };
>  
>  &can1 {
> @@ -124,6 +133,14 @@
>  	status = "okay";
>  };
>  
> +&usbotg {
> +	vbus-supply = <&reg_usb_otg_vbus>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usbotg>;
> +	disable-over-current;
> +	status = "okay";
> +};
> +
>  &usdhc1 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_usdhc1>;
> @@ -198,6 +215,12 @@
>  		>;
>  	};
>  
> +	pinctrl_usbotg: usbotggrp {
> +		fsl,pins = <
> +			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
> +		>;
> +	};
> +
>  	pinctrl_usdhc1: usdhc1grp {
>  		fsl,pins = <
>  			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17070
> -- 
> 2.7.4
> 

^ permalink raw reply	[flat|nested] 32+ messages in thread
* Re: [PATCH v7 4/5] ARM: dts: imx6qdl-icore: Add usbotg support
@ 2016-10-21  1:25     ` Shawn Guo
  0 siblings, 0 replies; 32+ messages in thread
From: Shawn Guo @ 2016-10-21  1:25 UTC (permalink / raw)
  To: Jagan Teki
  Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA, Matteo Lisi,
	Michael Trimarchi, Jagan Teki, Sascha Hauer, Fabio Estevam

On Fri, Oct 14, 2016 at 02:57:22PM +0530, Jagan Teki wrote:
> From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
> 
> Add usbotg support for Engicam i.CoreM6 dql modules.
> 
> Cc: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
> Cc: Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>
> Cc: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Cc: Matteo Lisi <matteo.lisi-4s7YQHO/iPVBDgjK7y7TUQ@public.gmane.org>
> Cc: Michael Trimarchi <michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
> Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
> ---
> Changes for v7:
>         - none
> Changes for v6:
>         - none
> Changes for v5:
>         - none
> Changes for v4:
>         - new patch
> 
>  arch/arm/boot/dts/imx6qdl-icore.dtsi | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
> index ffec879..4e79858 100644
> --- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
> @@ -65,6 +65,15 @@
>  		regulator-boot-on;
>  		regulator-always-on;
>  	};
> +
> +	reg_usb_otg_vbus: usb_otg_vbus {

Same as host patch, please fix the node name.

Shawn

> +		compatible = "regulator-fixed";
> +		regulator-name = "usb_otg_vbus";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +	};
>  };
>  
>  &can1 {
> @@ -124,6 +133,14 @@
>  	status = "okay";
>  };
>  
> +&usbotg {
> +	vbus-supply = <&reg_usb_otg_vbus>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usbotg>;
> +	disable-over-current;
> +	status = "okay";
> +};
> +
>  &usdhc1 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_usdhc1>;
> @@ -198,6 +215,12 @@
>  		>;
>  	};
>  
> +	pinctrl_usbotg: usbotggrp {
> +		fsl,pins = <
> +			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
> +		>;
> +	};
> +
>  	pinctrl_usdhc1: usdhc1grp {
>  		fsl,pins = <
>  			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17070
> -- 
> 2.7.4
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 32+ messages in thread
* [PATCH v7 4/5] ARM: dts: imx6qdl-icore: Add usbotg support
@ 2016-10-21  1:25     ` Shawn Guo
  0 siblings, 0 replies; 32+ messages in thread
From: Shawn Guo @ 2016-10-21  1:25 UTC (permalink / raw)
  To: linux-arm-kernel

On Fri, Oct 14, 2016 at 02:57:22PM +0530, Jagan Teki wrote:
> From: Jagan Teki <jagan@amarulasolutions.com>
> 
> Add usbotg support for Engicam i.CoreM6 dql modules.
> 
> Cc: Sascha Hauer <kernel@pengutronix.de>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Matteo Lisi <matteo.lisi@engicam.com>
> Cc: Michael Trimarchi <michael@amarulasolutions.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v7:
>         - none
> Changes for v6:
>         - none
> Changes for v5:
>         - none
> Changes for v4:
>         - new patch
> 
>  arch/arm/boot/dts/imx6qdl-icore.dtsi | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
> index ffec879..4e79858 100644
> --- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
> @@ -65,6 +65,15 @@
>  		regulator-boot-on;
>  		regulator-always-on;
>  	};
> +
> +	reg_usb_otg_vbus: usb_otg_vbus {

Same as host patch, please fix the node name.

Shawn

> +		compatible = "regulator-fixed";
> +		regulator-name = "usb_otg_vbus";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +	};
>  };
>  
>  &can1 {
> @@ -124,6 +133,14 @@
>  	status = "okay";
>  };
>  
> +&usbotg {
> +	vbus-supply = <&reg_usb_otg_vbus>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usbotg>;
> +	disable-over-current;
> +	status = "okay";
> +};
> +
>  &usdhc1 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_usdhc1>;
> @@ -198,6 +215,12 @@
>  		>;
>  	};
>  
> +	pinctrl_usbotg: usbotggrp {
> +		fsl,pins = <
> +			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
> +		>;
> +	};
> +
>  	pinctrl_usdhc1: usdhc1grp {
>  		fsl,pins = <
>  			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17070
> -- 
> 2.7.4
> 

^ permalink raw reply	[flat|nested] 32+ messages in thread
* Re: [PATCH v7 5/5] ARM: dts: imx6qdl-icore: Add FEC support
  2016-10-14  9:27   ` Jagan Teki
@ 2016-10-21  1:31     ` Shawn Guo
  -1 siblings, 0 replies; 32+ messages in thread
From: Shawn Guo @ 2016-10-21  1:31 UTC (permalink / raw)
  To: Jagan Teki
  Cc: linux-arm-kernel, devicetree, linux-kernel, Matteo Lisi,
	Michael Trimarchi, Jagan Teki, Sascha Hauer, Fabio Estevam

On Fri, Oct 14, 2016 at 02:57:23PM +0530, Jagan Teki wrote:
> From: Jagan Teki <jagan@amarulasolutions.com>
> 
> Add FEC support for Engicam i.CoreM6 dql modules.
> 
> Observed similar 'eth0: link is not ready' issue which was
> discussed in [1] due rmii mode with external ref_clk, so added
> clock node along with the properties mentioned by Shawn in [2]
> 
> FEC link log:
> ------------
> $ ifconfig eth0 up
> [   27.905187] SMSC LAN8710/LAN8720 2188000.ethernet:00: attached PHY driver
>                [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=2188000.ethernet:00, irq=-1)
> [   27.918982] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> 
> [1] https://patchwork.kernel.org/patch/3491061/
> [2] https://patchwork.kernel.org/patch/3490511/
> 
> Cc: Sascha Hauer <kernel@pengutronix.de>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Matteo Lisi <matteo.lisi@engicam.com>
> Cc: Michael Trimarchi <michael@amarulasolutions.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v7:
>         - none
> Changes for v6:
>         - none
> Changes for v5:
>         - new patch
> 
>  arch/arm/boot/dts/imx6qdl-icore.dtsi | 37 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 37 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
> index 4e79858..972f48f 100644
> --- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
> @@ -48,6 +48,18 @@
>  		reg = <0x10000000 0x80000000>;
>  	};
>  
> +	clocks {
> +		#address-cells = <1>;
> +		#size-cells = <0>;

DT maintainers do not like this container node.  So please, just like
fix regulator node, put the fixed clock directly under root and give the
node an unique name like clock-xxx.

> +
> +		rmii_clk: clock@0 {
> +			compatible = "fixed-clock";
> +			reg = <0>;
> +			#clock-cells = <0>;
> +			clock-frequency = <25000000>;  /* 25MHz for example */
> +		};
> +	};
> +
>  	reg_3p3v: regulator-3p3v {
>  		compatible = "regulator-fixed";
>  		regulator-name = "3P3V";
> @@ -93,6 +105,15 @@
>  	assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
>  };
>  
> +&fec {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_enet>;
> +	phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
> +	clocks = <&clks 117>, <&clks 117>, <&rmii_clk>;

s/117/IMX6QDL_CLK_ENET

Shawn

> +	phy-mode = "rmii";
> +	status = "okay";
> +};
> +
>  &gpmi {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_gpmi_nand>;
> @@ -150,6 +171,22 @@
>  };
>  
>  &iomuxc {
> +	pinctrl_enet: enetgrp {
> +		fsl,pins = <
> +			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
> +			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b0b1
> +			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
> +			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
> +			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
> +			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
> +			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
> +			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
> +			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
> +			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b0
> +			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
> +		>;
> +	};
> +
>  	pinctrl_flexcan1: flexcan1grp {
>  		fsl,pins = <
>  			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020
> -- 
> 2.7.4
> 

^ permalink raw reply	[flat|nested] 32+ messages in thread
* [PATCH v7 5/5] ARM: dts: imx6qdl-icore: Add FEC support
@ 2016-10-21  1:31     ` Shawn Guo
  0 siblings, 0 replies; 32+ messages in thread
From: Shawn Guo @ 2016-10-21  1:31 UTC (permalink / raw)
  To: linux-arm-kernel

On Fri, Oct 14, 2016 at 02:57:23PM +0530, Jagan Teki wrote:
> From: Jagan Teki <jagan@amarulasolutions.com>
> 
> Add FEC support for Engicam i.CoreM6 dql modules.
> 
> Observed similar 'eth0: link is not ready' issue which was
> discussed in [1] due rmii mode with external ref_clk, so added
> clock node along with the properties mentioned by Shawn in [2]
> 
> FEC link log:
> ------------
> $ ifconfig eth0 up
> [   27.905187] SMSC LAN8710/LAN8720 2188000.ethernet:00: attached PHY driver
>                [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=2188000.ethernet:00, irq=-1)
> [   27.918982] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> 
> [1] https://patchwork.kernel.org/patch/3491061/
> [2] https://patchwork.kernel.org/patch/3490511/
> 
> Cc: Sascha Hauer <kernel@pengutronix.de>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Matteo Lisi <matteo.lisi@engicam.com>
> Cc: Michael Trimarchi <michael@amarulasolutions.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v7:
>         - none
> Changes for v6:
>         - none
> Changes for v5:
>         - new patch
> 
>  arch/arm/boot/dts/imx6qdl-icore.dtsi | 37 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 37 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
> index 4e79858..972f48f 100644
> --- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
> @@ -48,6 +48,18 @@
>  		reg = <0x10000000 0x80000000>;
>  	};
>  
> +	clocks {
> +		#address-cells = <1>;
> +		#size-cells = <0>;

DT maintainers do not like this container node.  So please, just like
fix regulator node, put the fixed clock directly under root and give the
node an unique name like clock-xxx.

> +
> +		rmii_clk: clock at 0 {
> +			compatible = "fixed-clock";
> +			reg = <0>;
> +			#clock-cells = <0>;
> +			clock-frequency = <25000000>;  /* 25MHz for example */
> +		};
> +	};
> +
>  	reg_3p3v: regulator-3p3v {
>  		compatible = "regulator-fixed";
>  		regulator-name = "3P3V";
> @@ -93,6 +105,15 @@
>  	assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
>  };
>  
> +&fec {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_enet>;
> +	phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
> +	clocks = <&clks 117>, <&clks 117>, <&rmii_clk>;

s/117/IMX6QDL_CLK_ENET

Shawn

> +	phy-mode = "rmii";
> +	status = "okay";
> +};
> +
>  &gpmi {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_gpmi_nand>;
> @@ -150,6 +171,22 @@
>  };
>  
>  &iomuxc {
> +	pinctrl_enet: enetgrp {
> +		fsl,pins = <
> +			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
> +			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b0b1
> +			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
> +			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
> +			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
> +			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
> +			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
> +			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
> +			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
> +			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b0
> +			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
> +		>;
> +	};
> +
>  	pinctrl_flexcan1: flexcan1grp {
>  		fsl,pins = <
>  			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020
> -- 
> 2.7.4
> 

^ permalink raw reply	[flat|nested] 32+ messages in thread
* Re: [PATCH v7 0/5] ARM: dts: imx6q: Add Engicam i.CoreM6 dts
  2016-10-18 12:00   ` Jagan Teki
  (?)
@ 2016-10-21  1:35     ` Shawn Guo
  -1 siblings, 0 replies; 32+ messages in thread
From: Shawn Guo @ 2016-10-21  1:35 UTC (permalink / raw)
  To: Jagan Teki
  Cc: devicetree, Matteo Lisi, linux-kernel, Jagan Teki,
	Michael Trimarchi, linux-arm-kernel

On Tue, Oct 18, 2016 at 05:30:28PM +0530, Jagan Teki wrote:
> Hi Shawn,
> 
> On Fri, Oct 14, 2016 at 2:57 PM, Jagan Teki <jteki@openedev.com> wrote:
> > This is series add dts support for Engicam I.Core M6 qdl modules. just
> > rebased on top of linux-next of previous set[1].
> >
> > [1] http://www.spinics.net/lists/kernel/msg2358233.html
> >
> > Jagan Teki (5):
> >   ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support
> >   ARM: dts: imx6q: Add Engicam i.CoreM6 DualLite/Solo initial support
> >   ARM: dts: imx6qdl-icore: Add usbhost support
> >   ARM: dts: imx6qdl-icore: Add usbotg support
> >   ARM: dts: imx6qdl-icore: Add FEC support
> >
> >  arch/arm/boot/dts/Makefile           |   2 +
> >  arch/arm/boot/dts/imx6dl-icore.dts   |  59 ++++++++
> >  arch/arm/boot/dts/imx6q-icore.dts    |  59 ++++++++
> >  arch/arm/boot/dts/imx6qdl-icore.dtsi | 271 +++++++++++++++++++++++++++++++++++
> >  4 files changed, 391 insertions(+)
> >  create mode 100644 arch/arm/boot/dts/imx6dl-icore.dts
> >  create mode 100644 arch/arm/boot/dts/imx6q-icore.dts
> >  create mode 100644 arch/arm/boot/dts/imx6qdl-icore.dtsi
> 
> Can you pick this series?

Sorry for the delay.  The first two patches look good, and I had a
couple of small comments on the other 3.  Also, for the initial board
support submission like this, you do not need to split it per device
support.  That said, please squash the series into one patch when
resending.

Shawn

^ permalink raw reply	[flat|nested] 32+ messages in thread
* Re: [PATCH v7 0/5] ARM: dts: imx6q: Add Engicam i.CoreM6 dts
@ 2016-10-21  1:35     ` Shawn Guo
  0 siblings, 0 replies; 32+ messages in thread
From: Shawn Guo @ 2016-10-21  1:35 UTC (permalink / raw)
  To: Jagan Teki
  Cc: devicetree, Matteo Lisi, linux-kernel, Jagan Teki,
	Michael Trimarchi, linux-arm-kernel

On Tue, Oct 18, 2016 at 05:30:28PM +0530, Jagan Teki wrote:
> Hi Shawn,
> 
> On Fri, Oct 14, 2016 at 2:57 PM, Jagan Teki <jteki@openedev.com> wrote:
> > This is series add dts support for Engicam I.Core M6 qdl modules. just
> > rebased on top of linux-next of previous set[1].
> >
> > [1] http://www.spinics.net/lists/kernel/msg2358233.html
> >
> > Jagan Teki (5):
> >   ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support
> >   ARM: dts: imx6q: Add Engicam i.CoreM6 DualLite/Solo initial support
> >   ARM: dts: imx6qdl-icore: Add usbhost support
> >   ARM: dts: imx6qdl-icore: Add usbotg support
> >   ARM: dts: imx6qdl-icore: Add FEC support
> >
> >  arch/arm/boot/dts/Makefile           |   2 +
> >  arch/arm/boot/dts/imx6dl-icore.dts   |  59 ++++++++
> >  arch/arm/boot/dts/imx6q-icore.dts    |  59 ++++++++
> >  arch/arm/boot/dts/imx6qdl-icore.dtsi | 271 +++++++++++++++++++++++++++++++++++
> >  4 files changed, 391 insertions(+)
> >  create mode 100644 arch/arm/boot/dts/imx6dl-icore.dts
> >  create mode 100644 arch/arm/boot/dts/imx6q-icore.dts
> >  create mode 100644 arch/arm/boot/dts/imx6qdl-icore.dtsi
> 
> Can you pick this series?

Sorry for the delay.  The first two patches look good, and I had a
couple of small comments on the other 3.  Also, for the initial board
support submission like this, you do not need to split it per device
support.  That said, please squash the series into one patch when
resending.

Shawn

^ permalink raw reply	[flat|nested] 32+ messages in thread
* [PATCH v7 0/5] ARM: dts: imx6q: Add Engicam i.CoreM6 dts
@ 2016-10-21  1:35     ` Shawn Guo
  0 siblings, 0 replies; 32+ messages in thread
From: Shawn Guo @ 2016-10-21  1:35 UTC (permalink / raw)
  To: linux-arm-kernel

On Tue, Oct 18, 2016 at 05:30:28PM +0530, Jagan Teki wrote:
> Hi Shawn,
> 
> On Fri, Oct 14, 2016 at 2:57 PM, Jagan Teki <jteki@openedev.com> wrote:
> > This is series add dts support for Engicam I.Core M6 qdl modules. just
> > rebased on top of linux-next of previous set[1].
> >
> > [1] http://www.spinics.net/lists/kernel/msg2358233.html
> >
> > Jagan Teki (5):
> >   ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support
> >   ARM: dts: imx6q: Add Engicam i.CoreM6 DualLite/Solo initial support
> >   ARM: dts: imx6qdl-icore: Add usbhost support
> >   ARM: dts: imx6qdl-icore: Add usbotg support
> >   ARM: dts: imx6qdl-icore: Add FEC support
> >
> >  arch/arm/boot/dts/Makefile           |   2 +
> >  arch/arm/boot/dts/imx6dl-icore.dts   |  59 ++++++++
> >  arch/arm/boot/dts/imx6q-icore.dts    |  59 ++++++++
> >  arch/arm/boot/dts/imx6qdl-icore.dtsi | 271 +++++++++++++++++++++++++++++++++++
> >  4 files changed, 391 insertions(+)
> >  create mode 100644 arch/arm/boot/dts/imx6dl-icore.dts
> >  create mode 100644 arch/arm/boot/dts/imx6q-icore.dts
> >  create mode 100644 arch/arm/boot/dts/imx6qdl-icore.dtsi
> 
> Can you pick this series?

Sorry for the delay.  The first two patches look good, and I had a
couple of small comments on the other 3.  Also, for the initial board
support submission like this, you do not need to split it per device
support.  That said, please squash the series into one patch when
resending.

Shawn

^ permalink raw reply	[flat|nested] 32+ messages in thread
* Re: [PATCH v7 0/5] ARM: dts: imx6q: Add Engicam i.CoreM6 dts
  2016-10-21  1:35     ` Shawn Guo
  (?)
@ 2016-10-21  7:55       ` Jagan Teki
  -1 siblings, 0 replies; 32+ messages in thread
From: Jagan Teki @ 2016-10-21  7:55 UTC (permalink / raw)
  To: Shawn Guo
  Cc: devicetree, Matteo Lisi, linux-kernel, Michael Trimarchi,
	linux-arm-kernel

On Fri, Oct 21, 2016 at 7:05 AM, Shawn Guo <shawnguo@kernel.org> wrote:
> On Tue, Oct 18, 2016 at 05:30:28PM +0530, Jagan Teki wrote:
>> Hi Shawn,
>>
>> On Fri, Oct 14, 2016 at 2:57 PM, Jagan Teki <jteki@openedev.com> wrote:
>> > This is series add dts support for Engicam I.Core M6 qdl modules. just
>> > rebased on top of linux-next of previous set[1].
>> >
>> > [1] http://www.spinics.net/lists/kernel/msg2358233.html
>> >
>> > Jagan Teki (5):
>> >   ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support
>> >   ARM: dts: imx6q: Add Engicam i.CoreM6 DualLite/Solo initial support
>> >   ARM: dts: imx6qdl-icore: Add usbhost support
>> >   ARM: dts: imx6qdl-icore: Add usbotg support
>> >   ARM: dts: imx6qdl-icore: Add FEC support
>> >
>> >  arch/arm/boot/dts/Makefile           |   2 +
>> >  arch/arm/boot/dts/imx6dl-icore.dts   |  59 ++++++++
>> >  arch/arm/boot/dts/imx6q-icore.dts    |  59 ++++++++
>> >  arch/arm/boot/dts/imx6qdl-icore.dtsi | 271 +++++++++++++++++++++++++++++++++++
>> >  4 files changed, 391 insertions(+)
>> >  create mode 100644 arch/arm/boot/dts/imx6dl-icore.dts
>> >  create mode 100644 arch/arm/boot/dts/imx6q-icore.dts
>> >  create mode 100644 arch/arm/boot/dts/imx6qdl-icore.dtsi
>>
>> Can you pick this series?
>
> Sorry for the delay.  The first two patches look good, and I had a
> couple of small comments on the other 3.  Also, for the initial board
> support submission like this, you do not need to split it per device
> support.  That said, please squash the series into one patch when
> resending.

Sent v8 by squash the usb host and otg with first patch and second and
third one keep separated as one is new board dts and other one though
it is FEC support it also have a rmii_clk addition which is kind of
new compared to other qdl dtsi files. So please let me know if have
any more comments.

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.

^ permalink raw reply	[flat|nested] 32+ messages in thread
* Re: [PATCH v7 0/5] ARM: dts: imx6q: Add Engicam i.CoreM6 dts
@ 2016-10-21  7:55       ` Jagan Teki
  0 siblings, 0 replies; 32+ messages in thread
From: Jagan Teki @ 2016-10-21  7:55 UTC (permalink / raw)
  To: Shawn Guo
  Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, Matteo Lisi,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA, Michael Trimarchi,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r

On Fri, Oct 21, 2016 at 7:05 AM, Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote:
> On Tue, Oct 18, 2016 at 05:30:28PM +0530, Jagan Teki wrote:
>> Hi Shawn,
>>
>> On Fri, Oct 14, 2016 at 2:57 PM, Jagan Teki <jteki-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org> wrote:
>> > This is series add dts support for Engicam I.Core M6 qdl modules. just
>> > rebased on top of linux-next of previous set[1].
>> >
>> > [1] http://www.spinics.net/lists/kernel/msg2358233.html
>> >
>> > Jagan Teki (5):
>> >   ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support
>> >   ARM: dts: imx6q: Add Engicam i.CoreM6 DualLite/Solo initial support
>> >   ARM: dts: imx6qdl-icore: Add usbhost support
>> >   ARM: dts: imx6qdl-icore: Add usbotg support
>> >   ARM: dts: imx6qdl-icore: Add FEC support
>> >
>> >  arch/arm/boot/dts/Makefile           |   2 +
>> >  arch/arm/boot/dts/imx6dl-icore.dts   |  59 ++++++++
>> >  arch/arm/boot/dts/imx6q-icore.dts    |  59 ++++++++
>> >  arch/arm/boot/dts/imx6qdl-icore.dtsi | 271 +++++++++++++++++++++++++++++++++++
>> >  4 files changed, 391 insertions(+)
>> >  create mode 100644 arch/arm/boot/dts/imx6dl-icore.dts
>> >  create mode 100644 arch/arm/boot/dts/imx6q-icore.dts
>> >  create mode 100644 arch/arm/boot/dts/imx6qdl-icore.dtsi
>>
>> Can you pick this series?
>
> Sorry for the delay.  The first two patches look good, and I had a
> couple of small comments on the other 3.  Also, for the initial board
> support submission like this, you do not need to split it per device
> support.  That said, please squash the series into one patch when
> resending.

Sent v8 by squash the usb host and otg with first patch and second and
third one keep separated as one is new board dts and other one though
it is FEC support it also have a rmii_clk addition which is kind of
new compared to other qdl dtsi files. So please let me know if have
any more comments.

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 32+ messages in thread
* [PATCH v7 0/5] ARM: dts: imx6q: Add Engicam i.CoreM6 dts
@ 2016-10-21  7:55       ` Jagan Teki
  0 siblings, 0 replies; 32+ messages in thread
From: Jagan Teki @ 2016-10-21  7:55 UTC (permalink / raw)
  To: linux-arm-kernel

On Fri, Oct 21, 2016 at 7:05 AM, Shawn Guo <shawnguo@kernel.org> wrote:
> On Tue, Oct 18, 2016 at 05:30:28PM +0530, Jagan Teki wrote:
>> Hi Shawn,
>>
>> On Fri, Oct 14, 2016 at 2:57 PM, Jagan Teki <jteki@openedev.com> wrote:
>> > This is series add dts support for Engicam I.Core M6 qdl modules. just
>> > rebased on top of linux-next of previous set[1].
>> >
>> > [1] http://www.spinics.net/lists/kernel/msg2358233.html
>> >
>> > Jagan Teki (5):
>> >   ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support
>> >   ARM: dts: imx6q: Add Engicam i.CoreM6 DualLite/Solo initial support
>> >   ARM: dts: imx6qdl-icore: Add usbhost support
>> >   ARM: dts: imx6qdl-icore: Add usbotg support
>> >   ARM: dts: imx6qdl-icore: Add FEC support
>> >
>> >  arch/arm/boot/dts/Makefile           |   2 +
>> >  arch/arm/boot/dts/imx6dl-icore.dts   |  59 ++++++++
>> >  arch/arm/boot/dts/imx6q-icore.dts    |  59 ++++++++
>> >  arch/arm/boot/dts/imx6qdl-icore.dtsi | 271 +++++++++++++++++++++++++++++++++++
>> >  4 files changed, 391 insertions(+)
>> >  create mode 100644 arch/arm/boot/dts/imx6dl-icore.dts
>> >  create mode 100644 arch/arm/boot/dts/imx6q-icore.dts
>> >  create mode 100644 arch/arm/boot/dts/imx6qdl-icore.dtsi
>>
>> Can you pick this series?
>
> Sorry for the delay.  The first two patches look good, and I had a
> couple of small comments on the other 3.  Also, for the initial board
> support submission like this, you do not need to split it per device
> support.  That said, please squash the series into one patch when
> resending.

Sent v8 by squash the usb host and otg with first patch and second and
third one keep separated as one is new board dts and other one though
it is FEC support it also have a rmii_clk addition which is kind of
new compared to other qdl dtsi files. So please let me know if have
any more comments.

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.

^ permalink raw reply	[flat|nested] 32+ messages in thread
end of thread, other threads:[~2016-10-21  7:55 UTC | newest]

Thread overview: 32+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-10-14  9:27 [PATCH v7 0/5] ARM: dts: imx6q: Add Engicam i.CoreM6 dts Jagan Teki
2016-10-14  9:27 ` Jagan Teki
2016-10-14  9:27 ` Jagan Teki
2016-10-14  9:27 ` [PATCH v7 1/5] ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support Jagan Teki
2016-10-14  9:27   ` Jagan Teki
2016-10-14  9:27   ` Jagan Teki
2016-10-14  9:27 ` [PATCH v7 2/5] ARM: dts: imx6q: Add Engicam i.CoreM6 DualLite/Solo " Jagan Teki
2016-10-14  9:27   ` Jagan Teki
2016-10-14  9:27   ` Jagan Teki
2016-10-14  9:27 ` [PATCH v7 3/5] ARM: dts: imx6qdl-icore: Add usbhost support Jagan Teki
2016-10-14  9:27   ` Jagan Teki
2016-10-21  1:21   ` Shawn Guo
2016-10-21  1:21     ` Shawn Guo
2016-10-14  9:27 ` [PATCH v7 4/5] ARM: dts: imx6qdl-icore: Add usbotg support Jagan Teki
2016-10-14  9:27   ` Jagan Teki
2016-10-21  1:25   ` Shawn Guo
2016-10-21  1:25     ` Shawn Guo
2016-10-21  1:25     ` Shawn Guo
2016-10-14  9:27 ` [PATCH v7 5/5] ARM: dts: imx6qdl-icore: Add FEC support Jagan Teki
2016-10-14  9:27   ` Jagan Teki
2016-10-14  9:27   ` Jagan Teki
2016-10-21  1:31   ` Shawn Guo
2016-10-21  1:31     ` Shawn Guo
2016-10-18 12:00 ` [PATCH v7 0/5] ARM: dts: imx6q: Add Engicam i.CoreM6 dts Jagan Teki
2016-10-18 12:00   ` Jagan Teki
2016-10-18 12:00   ` Jagan Teki
2016-10-21  1:35   ` Shawn Guo
2016-10-21  1:35     ` Shawn Guo
2016-10-21  1:35     ` Shawn Guo
2016-10-21  7:55     ` Jagan Teki
2016-10-21  7:55       ` Jagan Teki
2016-10-21  7:55       ` Jagan Teki

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.