* [RESEND PATCH v6 0/2] ARM: hip04: add GPIO support @ 2015-03-25 6:57 ` Zhou Wang 0 siblings, 0 replies; 10+ messages in thread From: Zhou Wang @ 2015-03-25 6:57 UTC (permalink / raw) To: Haojian Zhuang, Wei Xu, Linus Walleij, Alexandre Courbot, Arnd Bergmann, Olof Johansson, Russell King Cc: linux-arm-kernel, linux-gpio, devicetree, liguozhu, Zhou Wang This series add the support for the GPIOs of Hisilicon Soc hip04. Hip04 uses synopsis' GPIO IP, and we use the dwapb GPIO driver here. This series add the corresponding dts. The default value of ARCH_NR_GPIOS is used to find gpio base here. Now this patchset is based on v4.0-rc5 Change in v6: - Change E-mail address in signed-off-by to "wangzhou1@hisilicon.com" Change in v5: - Base on v3.19-rc1 - Just use default value of ARCH_NR_GPIOS to find gpio base. Remove the new added patch(3/4) in v4. Change in v4: - Delete "default 128 if ARCH_HIP04" in arch/arm/Kconfig - add a new patch to support find GPIO base number in increasing order - add gpio-number-forward property in snps gpio binding doc Change in v3: - Move CONFIG_GPIO_DWAPB to hisi_defconfig - Add CONFIG_GPIOLIB, CONFIG_GPIO_SYSFS in hisi_defconfig Change in v2: - Add select GPIO_DWAPB in arch/arm/mach-hisi/Kconfig Link for v4: - http://www.spinics.net/lists/arm-kernel/msg383883.html Link for v3: - http://www.spinics.net/lists/devicetree/msg60324.html Zhou Wang (2): ARM: hip04: add GPIO configure in hisi_defconfig ARM: dts: hip04: add GPIO pieces arch/arm/boot/dts/hip04.dtsi | 75 +++++++++++++++++++++++++++++++++++++++++ arch/arm/configs/hisi_defconfig | 1 + 2 files changed, 76 insertions(+) -- 1.9.1 ^ permalink raw reply [flat|nested] 10+ messages in thread
* [RESEND PATCH v6 0/2] ARM: hip04: add GPIO support @ 2015-03-25 6:57 ` Zhou Wang 0 siblings, 0 replies; 10+ messages in thread From: Zhou Wang @ 2015-03-25 6:57 UTC (permalink / raw) To: linux-arm-kernel This series add the support for the GPIOs of Hisilicon Soc hip04. Hip04 uses synopsis' GPIO IP, and we use the dwapb GPIO driver here. This series add the corresponding dts. The default value of ARCH_NR_GPIOS is used to find gpio base here. Now this patchset is based on v4.0-rc5 Change in v6: - Change E-mail address in signed-off-by to "wangzhou1 at hisilicon.com" Change in v5: - Base on v3.19-rc1 - Just use default value of ARCH_NR_GPIOS to find gpio base. Remove the new added patch(3/4) in v4. Change in v4: - Delete "default 128 if ARCH_HIP04" in arch/arm/Kconfig - add a new patch to support find GPIO base number in increasing order - add gpio-number-forward property in snps gpio binding doc Change in v3: - Move CONFIG_GPIO_DWAPB to hisi_defconfig - Add CONFIG_GPIOLIB, CONFIG_GPIO_SYSFS in hisi_defconfig Change in v2: - Add select GPIO_DWAPB in arch/arm/mach-hisi/Kconfig Link for v4: - http://www.spinics.net/lists/arm-kernel/msg383883.html Link for v3: - http://www.spinics.net/lists/devicetree/msg60324.html Zhou Wang (2): ARM: hip04: add GPIO configure in hisi_defconfig ARM: dts: hip04: add GPIO pieces arch/arm/boot/dts/hip04.dtsi | 75 +++++++++++++++++++++++++++++++++++++++++ arch/arm/configs/hisi_defconfig | 1 + 2 files changed, 76 insertions(+) -- 1.9.1 ^ permalink raw reply [flat|nested] 10+ messages in thread
* [RESEND PATCH v6 1/2] ARM: hip04: add GPIO configure in hisi_defconfig 2015-03-25 6:57 ` Zhou Wang @ 2015-03-25 6:57 ` Zhou Wang -1 siblings, 0 replies; 10+ messages in thread From: Zhou Wang @ 2015-03-25 6:57 UTC (permalink / raw) To: Haojian Zhuang, Wei Xu, Linus Walleij, Alexandre Courbot, Arnd Bergmann, Olof Johansson, Russell King Cc: linux-arm-kernel, linux-gpio, devicetree, liguozhu, Zhou Wang, Zhou Wang From: Zhou Wang <wangzhou.bry@gmail.com> The GPIO controller of Hisilicon hip04 Soc uses the IP from Sysnopsis, gpio-dwapb.c can be reused to support this GPIO controller. This patch adds related configure item in hisi_defconfig. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> --- arch/arm/configs/hisi_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/hisi_defconfig b/arch/arm/configs/hisi_defconfig index c34da58..e7bf486 100644 --- a/arch/arm/configs/hisi_defconfig +++ b/arch/arm/configs/hisi_defconfig @@ -51,6 +51,7 @@ CONFIG_GPIO_SYSFS=y CONFIG_GPIOLIB=y CONFIG_GPIO_GENERIC_PLATFORM=y CONFIG_REGULATOR_GPIO=y +CONFIG_GPIO_DWAPB=y CONFIG_MFD_SYSCON=y CONFIG_POWER_RESET_SYSCON=y CONFIG_DRM=y -- 1.9.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [RESEND PATCH v6 1/2] ARM: hip04: add GPIO configure in hisi_defconfig @ 2015-03-25 6:57 ` Zhou Wang 0 siblings, 0 replies; 10+ messages in thread From: Zhou Wang @ 2015-03-25 6:57 UTC (permalink / raw) To: linux-arm-kernel From: Zhou Wang <wangzhou.bry@gmail.com> The GPIO controller of Hisilicon hip04 Soc uses the IP from Sysnopsis, gpio-dwapb.c can be reused to support this GPIO controller. This patch adds related configure item in hisi_defconfig. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> --- arch/arm/configs/hisi_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/hisi_defconfig b/arch/arm/configs/hisi_defconfig index c34da58..e7bf486 100644 --- a/arch/arm/configs/hisi_defconfig +++ b/arch/arm/configs/hisi_defconfig @@ -51,6 +51,7 @@ CONFIG_GPIO_SYSFS=y CONFIG_GPIOLIB=y CONFIG_GPIO_GENERIC_PLATFORM=y CONFIG_REGULATOR_GPIO=y +CONFIG_GPIO_DWAPB=y CONFIG_MFD_SYSCON=y CONFIG_POWER_RESET_SYSCON=y CONFIG_DRM=y -- 1.9.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
[parent not found: <1427266665-226718-1-git-send-email-wangzhou1-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>]
* [RESEND PATCH v6 2/2] ARM: dts: hip04: add GPIO pieces 2015-03-25 6:57 ` Zhou Wang @ 2015-03-25 6:57 ` Zhou Wang -1 siblings, 0 replies; 10+ messages in thread From: Zhou Wang @ 2015-03-25 6:57 UTC (permalink / raw) To: Haojian Zhuang, Wei Xu, Linus Walleij, Alexandre Courbot, Arnd Bergmann, Olof Johansson, Russell King Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-gpio-u79uwXL29TY76Z2rM5mHXA, devicetree-u79uwXL29TY76Z2rM5mHXA, liguozhu-C8/M+/jPZTeaMJb+Lgu22Q, Zhou Wang, Zhou Wang From: Zhou Wang <wangzhou.bry-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Hisilicon Soc hip04 has four GPIO controllers, each one has 32 GPIOs and can be configured to be an interrupt controller.The GPIO controllers are compatible with the snps,dw-apb-gpio driver. This patch add the corresponding device tree nodes. Acked-by: Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Signed-off-by: Zhou Wang <wangzhou1-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org> --- arch/arm/boot/dts/hip04.dtsi | 75 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 75 insertions(+) diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi index 2388145..267942a 100644 --- a/arch/arm/boot/dts/hip04.dtsi +++ b/arch/arm/boot/dts/hip04.dtsi @@ -269,6 +269,81 @@ interrupts = <0 372 4>; }; + gpio@4003000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0x4003000 0x1000>; + + gpio3: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 392 4>; + }; + }; + + gpio@4002000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0x4002000 0x1000>; + + gpio2: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 391 4>; + }; + }; + + gpio@4001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0x4001000 0x1000>; + + gpio1: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 390 4>; + }; + }; + + gpio@4000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0x4000000 0x1000>; + + gpio0: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 389 4>; + }; + }; }; etb@0,e3c42000 { -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [RESEND PATCH v6 2/2] ARM: dts: hip04: add GPIO pieces @ 2015-03-25 6:57 ` Zhou Wang 0 siblings, 0 replies; 10+ messages in thread From: Zhou Wang @ 2015-03-25 6:57 UTC (permalink / raw) To: linux-arm-kernel From: Zhou Wang <wangzhou.bry@gmail.com> Hisilicon Soc hip04 has four GPIO controllers, each one has 32 GPIOs and can be configured to be an interrupt controller.The GPIO controllers are compatible with the snps,dw-apb-gpio driver. This patch add the corresponding device tree nodes. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> --- arch/arm/boot/dts/hip04.dtsi | 75 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 75 insertions(+) diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi index 2388145..267942a 100644 --- a/arch/arm/boot/dts/hip04.dtsi +++ b/arch/arm/boot/dts/hip04.dtsi @@ -269,6 +269,81 @@ interrupts = <0 372 4>; }; + gpio at 4003000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0x4003000 0x1000>; + + gpio3: gpio-controller at 0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 392 4>; + }; + }; + + gpio at 4002000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0x4002000 0x1000>; + + gpio2: gpio-controller at 0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 391 4>; + }; + }; + + gpio at 4001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0x4001000 0x1000>; + + gpio1: gpio-controller at 0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 390 4>; + }; + }; + + gpio at 4000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0x4000000 0x1000>; + + gpio0: gpio-controller at 0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 389 4>; + }; + }; }; etb at 0,e3c42000 { -- 1.9.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [RESEND PATCH v6 0/2] ARM: hip04: add GPIO support 2015-03-25 6:57 ` Zhou Wang @ 2015-03-25 7:02 ` Haojian Zhuang -1 siblings, 0 replies; 10+ messages in thread From: Haojian Zhuang @ 2015-03-25 7:02 UTC (permalink / raw) To: Zhou Wang Cc: Wei Xu, Linus Walleij, Alexandre Courbot, Arnd Bergmann, Olof Johansson, Russell King, linux-arm-kernel, linux-gpio, devicetree, Liguozhu (Kenneth) On 25 March 2015 at 14:57, Zhou Wang <wangzhou1@hisilicon.com> wrote: > This series add the support for the GPIOs of Hisilicon Soc hip04. Hip04 uses > synopsis' GPIO IP, and we use the dwapb GPIO driver here. This series add the > corresponding dts. The default value of ARCH_NR_GPIOS is used to find gpio > base here. > > Now this patchset is based on v4.0-rc5 > > Change in v6: > - Change E-mail address in signed-off-by to "wangzhou1@hisilicon.com" > Change in v5: > - Base on v3.19-rc1 > - Just use default value of ARCH_NR_GPIOS to find gpio base. Remove the new > added patch(3/4) in v4. > Change in v4: > - Delete "default 128 if ARCH_HIP04" in arch/arm/Kconfig > - add a new patch to support find GPIO base number in increasing order > - add gpio-number-forward property in snps gpio binding doc > Change in v3: > - Move CONFIG_GPIO_DWAPB to hisi_defconfig > - Add CONFIG_GPIOLIB, CONFIG_GPIO_SYSFS in hisi_defconfig > Change in v2: > - Add select GPIO_DWAPB in arch/arm/mach-hisi/Kconfig > > Link for v4: > - http://www.spinics.net/lists/arm-kernel/msg383883.html > Link for v3: > - http://www.spinics.net/lists/devicetree/msg60324.html > > > Zhou Wang (2): > ARM: hip04: add GPIO configure in hisi_defconfig > ARM: dts: hip04: add GPIO pieces > > arch/arm/boot/dts/hip04.dtsi | 75 +++++++++++++++++++++++++++++++++++++++++ > arch/arm/configs/hisi_defconfig | 1 + > 2 files changed, 76 insertions(+) > > -- > 1.9.1 > Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org> ^ permalink raw reply [flat|nested] 10+ messages in thread
* [RESEND PATCH v6 0/2] ARM: hip04: add GPIO support @ 2015-03-25 7:02 ` Haojian Zhuang 0 siblings, 0 replies; 10+ messages in thread From: Haojian Zhuang @ 2015-03-25 7:02 UTC (permalink / raw) To: linux-arm-kernel On 25 March 2015 at 14:57, Zhou Wang <wangzhou1@hisilicon.com> wrote: > This series add the support for the GPIOs of Hisilicon Soc hip04. Hip04 uses > synopsis' GPIO IP, and we use the dwapb GPIO driver here. This series add the > corresponding dts. The default value of ARCH_NR_GPIOS is used to find gpio > base here. > > Now this patchset is based on v4.0-rc5 > > Change in v6: > - Change E-mail address in signed-off-by to "wangzhou1 at hisilicon.com" > Change in v5: > - Base on v3.19-rc1 > - Just use default value of ARCH_NR_GPIOS to find gpio base. Remove the new > added patch(3/4) in v4. > Change in v4: > - Delete "default 128 if ARCH_HIP04" in arch/arm/Kconfig > - add a new patch to support find GPIO base number in increasing order > - add gpio-number-forward property in snps gpio binding doc > Change in v3: > - Move CONFIG_GPIO_DWAPB to hisi_defconfig > - Add CONFIG_GPIOLIB, CONFIG_GPIO_SYSFS in hisi_defconfig > Change in v2: > - Add select GPIO_DWAPB in arch/arm/mach-hisi/Kconfig > > Link for v4: > - http://www.spinics.net/lists/arm-kernel/msg383883.html > Link for v3: > - http://www.spinics.net/lists/devicetree/msg60324.html > > > Zhou Wang (2): > ARM: hip04: add GPIO configure in hisi_defconfig > ARM: dts: hip04: add GPIO pieces > > arch/arm/boot/dts/hip04.dtsi | 75 +++++++++++++++++++++++++++++++++++++++++ > arch/arm/configs/hisi_defconfig | 1 + > 2 files changed, 76 insertions(+) > > -- > 1.9.1 > Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org> ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [RESEND PATCH v6 0/2] ARM: hip04: add GPIO support 2015-03-25 7:02 ` Haojian Zhuang @ 2015-03-25 9:35 ` Zhou Wang -1 siblings, 0 replies; 10+ messages in thread From: Zhou Wang @ 2015-03-25 9:35 UTC (permalink / raw) To: Haojian Zhuang Cc: Wei Xu, Linus Walleij, Alexandre Courbot, Arnd Bergmann, Olof Johansson, Russell King, linux-arm-kernel, linux-gpio, devicetree, Liguozhu (Kenneth) On 2015/3/25 15:02, Haojian Zhuang wrote: > On 25 March 2015 at 14:57, Zhou Wang <wangzhou1@hisilicon.com> wrote: >> This series add the support for the GPIOs of Hisilicon Soc hip04. Hip04 uses >> synopsis' GPIO IP, and we use the dwapb GPIO driver here. This series add the >> corresponding dts. The default value of ARCH_NR_GPIOS is used to find gpio >> base here. >> >> Now this patchset is based on v4.0-rc5 >> >> Change in v6: >> - Change E-mail address in signed-off-by to "wangzhou1@hisilicon.com" >> Change in v5: >> - Base on v3.19-rc1 >> - Just use default value of ARCH_NR_GPIOS to find gpio base. Remove the new >> added patch(3/4) in v4. >> Change in v4: >> - Delete "default 128 if ARCH_HIP04" in arch/arm/Kconfig >> - add a new patch to support find GPIO base number in increasing order >> - add gpio-number-forward property in snps gpio binding doc >> Change in v3: >> - Move CONFIG_GPIO_DWAPB to hisi_defconfig >> - Add CONFIG_GPIOLIB, CONFIG_GPIO_SYSFS in hisi_defconfig >> Change in v2: >> - Add select GPIO_DWAPB in arch/arm/mach-hisi/Kconfig >> >> Link for v4: >> - http://www.spinics.net/lists/arm-kernel/msg383883.html >> Link for v3: >> - http://www.spinics.net/lists/devicetree/msg60324.html >> >> >> Zhou Wang (2): >> ARM: hip04: add GPIO configure in hisi_defconfig >> ARM: dts: hip04: add GPIO pieces >> >> arch/arm/boot/dts/hip04.dtsi | 75 +++++++++++++++++++++++++++++++++++++++++ >> arch/arm/configs/hisi_defconfig | 1 + >> 2 files changed, 76 insertions(+) >> >> -- >> 1.9.1 >> > Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org> > > . > Thanks! Zhou Wang ^ permalink raw reply [flat|nested] 10+ messages in thread
* [RESEND PATCH v6 0/2] ARM: hip04: add GPIO support @ 2015-03-25 9:35 ` Zhou Wang 0 siblings, 0 replies; 10+ messages in thread From: Zhou Wang @ 2015-03-25 9:35 UTC (permalink / raw) To: linux-arm-kernel On 2015/3/25 15:02, Haojian Zhuang wrote: > On 25 March 2015 at 14:57, Zhou Wang <wangzhou1@hisilicon.com> wrote: >> This series add the support for the GPIOs of Hisilicon Soc hip04. Hip04 uses >> synopsis' GPIO IP, and we use the dwapb GPIO driver here. This series add the >> corresponding dts. The default value of ARCH_NR_GPIOS is used to find gpio >> base here. >> >> Now this patchset is based on v4.0-rc5 >> >> Change in v6: >> - Change E-mail address in signed-off-by to "wangzhou1 at hisilicon.com" >> Change in v5: >> - Base on v3.19-rc1 >> - Just use default value of ARCH_NR_GPIOS to find gpio base. Remove the new >> added patch(3/4) in v4. >> Change in v4: >> - Delete "default 128 if ARCH_HIP04" in arch/arm/Kconfig >> - add a new patch to support find GPIO base number in increasing order >> - add gpio-number-forward property in snps gpio binding doc >> Change in v3: >> - Move CONFIG_GPIO_DWAPB to hisi_defconfig >> - Add CONFIG_GPIOLIB, CONFIG_GPIO_SYSFS in hisi_defconfig >> Change in v2: >> - Add select GPIO_DWAPB in arch/arm/mach-hisi/Kconfig >> >> Link for v4: >> - http://www.spinics.net/lists/arm-kernel/msg383883.html >> Link for v3: >> - http://www.spinics.net/lists/devicetree/msg60324.html >> >> >> Zhou Wang (2): >> ARM: hip04: add GPIO configure in hisi_defconfig >> ARM: dts: hip04: add GPIO pieces >> >> arch/arm/boot/dts/hip04.dtsi | 75 +++++++++++++++++++++++++++++++++++++++++ >> arch/arm/configs/hisi_defconfig | 1 + >> 2 files changed, 76 insertions(+) >> >> -- >> 1.9.1 >> > Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org> > > . > Thanks! Zhou Wang ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2015-03-25 9:35 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-03-25 6:57 [RESEND PATCH v6 0/2] ARM: hip04: add GPIO support Zhou Wang
2015-03-25 6:57 ` Zhou Wang
2015-03-25 6:57 ` [RESEND PATCH v6 1/2] ARM: hip04: add GPIO configure in hisi_defconfig Zhou Wang
2015-03-25 6:57 ` Zhou Wang
[not found] ` <1427266665-226718-1-git-send-email-wangzhou1-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
2015-03-25 6:57 ` [RESEND PATCH v6 2/2] ARM: dts: hip04: add GPIO pieces Zhou Wang
2015-03-25 6:57 ` Zhou Wang
2015-03-25 7:02 ` [RESEND PATCH v6 0/2] ARM: hip04: add GPIO support Haojian Zhuang
2015-03-25 7:02 ` Haojian Zhuang
2015-03-25 9:35 ` Zhou Wang
2015-03-25 9:35 ` Zhou Wang
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.