All of lore.kernel.org
 help / color / mirror / Atom feed
From: Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: Zhou Wang <wangzhou1-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
Cc: Wei Xu <xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>,
	Brian Norris
	<computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>,
	"linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org"
	<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
	linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	"devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
	<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	"Liguozhu (Kenneth)"
	<liguozhu-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
Subject: Re: [RESEND PATCH v3] mtd: hisilicon: add device tree node for NAND controller
Date: Thu, 26 Mar 2015 10:13:29 +0800	[thread overview]
Message-ID: <CAD6h2NQr_Z600vC+7RRuLgoGvV4MCXz8TAd4C5eCnqbA0ZdPWw@mail.gmail.com> (raw)
In-Reply-To: <1427267091-227474-1-git-send-email-wangzhou1-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>

On 25 March 2015 at 15:04, Zhou Wang <wangzhou1-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org> wrote:
> This patch adds dts support for NAND flash controller of Hisilicon Soc Hip04.
> Now it is based on v4.0-rc5
>
> Changes in v3:
> - Change E-mail address in signed-off-by to "wangzhou1-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org"
> Changes in v2:
> - Base on v3.19-rc1
> - Use nand-ecc-strength, nand-ecc-step-size to replace hisi,nand-ecc-bits
> Changes in v1:
> - Move partition and other board related information into board dts file:
>   hip04-d01.dts
>
> Signed-off-by: Zhou Wang <wangzhou1-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
> ---
>  arch/arm/boot/dts/hip04-d01.dts | 27 +++++++++++++++++++++++++++
>  arch/arm/boot/dts/hip04.dtsi    |  7 +++++++
>  2 files changed, 34 insertions(+)
>
> diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts
> index 40a9e33..ba04dd5 100644
> --- a/arch/arm/boot/dts/hip04-d01.dts
> +++ b/arch/arm/boot/dts/hip04-d01.dts
> @@ -28,5 +28,32 @@
>                 uart0: uart@4007000 {
>                         status = "ok";
>                 };
> +
> +               nand: nand@4020000 {
> +                       nand-bus-width = <8>;
> +                       nand-ecc-mode = "hw";
> +                       nand-ecc-strength = <16>;
> +                       nand-ecc-step-size = <1024>;
> +
> +                       partition@0 {
> +                               label = "nand_text";
> +                               reg = <0x00000000 0x00400000>;
> +                       };
> +
> +                       partition@00400000 {
> +                               label = "nand_monitor";
> +                               reg = <0x00400000 0x00400000>;
> +                       };
> +
> +                       partition@00800000 {
> +                               label = "nand_kernel";
> +                               reg = <0x00800000 0x00800000>;
> +                       };
> +
> +                       partition@01000000 {
> +                               label = "nand_fs";
> +                               reg = <0x01000000 0x1f000000>;
> +                       };
> +               };
>         };
>  };
> diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
> index 2388145..ac32fce 100644
> --- a/arch/arm/boot/dts/hip04.dtsi
> +++ b/arch/arm/boot/dts/hip04.dtsi
> @@ -269,6 +269,13 @@
>                         interrupts = <0 372 4>;
>                 };
>
> +               nand: nand@4020000 {
> +                       compatible = "hisilicon,504-nfc";
> +                       reg = <0x4020000 0x10000>, <0x5000000 0x1000>;
> +                       interrupts = <0 379 4>;
> +                       #address-cells = <1>;
> +                       #size-cells = <1>;
> +               };
>         };
>
>         etb@0,e3c42000 {
> --
> 1.9.1
>

Acked-by: Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: Haojian Zhuang <haojian.zhuang@linaro.org>
To: Zhou Wang <wangzhou1@hisilicon.com>
Cc: "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	Arnd Bergmann <arnd@arndb.de>, Wei Xu <xuwei5@hisilicon.com>,
	linux-mtd@lists.infradead.org,
	Brian Norris <computersforpeace@gmail.com>,
	"Liguozhu \(Kenneth\)" <liguozhu@hisilicon.com>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [RESEND PATCH v3] mtd: hisilicon: add device tree node for NAND controller
Date: Thu, 26 Mar 2015 10:13:29 +0800	[thread overview]
Message-ID: <CAD6h2NQr_Z600vC+7RRuLgoGvV4MCXz8TAd4C5eCnqbA0ZdPWw@mail.gmail.com> (raw)
In-Reply-To: <1427267091-227474-1-git-send-email-wangzhou1@hisilicon.com>

On 25 March 2015 at 15:04, Zhou Wang <wangzhou1@hisilicon.com> wrote:
> This patch adds dts support for NAND flash controller of Hisilicon Soc Hip04.
> Now it is based on v4.0-rc5
>
> Changes in v3:
> - Change E-mail address in signed-off-by to "wangzhou1@hisilicon.com"
> Changes in v2:
> - Base on v3.19-rc1
> - Use nand-ecc-strength, nand-ecc-step-size to replace hisi,nand-ecc-bits
> Changes in v1:
> - Move partition and other board related information into board dts file:
>   hip04-d01.dts
>
> Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
> ---
>  arch/arm/boot/dts/hip04-d01.dts | 27 +++++++++++++++++++++++++++
>  arch/arm/boot/dts/hip04.dtsi    |  7 +++++++
>  2 files changed, 34 insertions(+)
>
> diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts
> index 40a9e33..ba04dd5 100644
> --- a/arch/arm/boot/dts/hip04-d01.dts
> +++ b/arch/arm/boot/dts/hip04-d01.dts
> @@ -28,5 +28,32 @@
>                 uart0: uart@4007000 {
>                         status = "ok";
>                 };
> +
> +               nand: nand@4020000 {
> +                       nand-bus-width = <8>;
> +                       nand-ecc-mode = "hw";
> +                       nand-ecc-strength = <16>;
> +                       nand-ecc-step-size = <1024>;
> +
> +                       partition@0 {
> +                               label = "nand_text";
> +                               reg = <0x00000000 0x00400000>;
> +                       };
> +
> +                       partition@00400000 {
> +                               label = "nand_monitor";
> +                               reg = <0x00400000 0x00400000>;
> +                       };
> +
> +                       partition@00800000 {
> +                               label = "nand_kernel";
> +                               reg = <0x00800000 0x00800000>;
> +                       };
> +
> +                       partition@01000000 {
> +                               label = "nand_fs";
> +                               reg = <0x01000000 0x1f000000>;
> +                       };
> +               };
>         };
>  };
> diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
> index 2388145..ac32fce 100644
> --- a/arch/arm/boot/dts/hip04.dtsi
> +++ b/arch/arm/boot/dts/hip04.dtsi
> @@ -269,6 +269,13 @@
>                         interrupts = <0 372 4>;
>                 };
>
> +               nand: nand@4020000 {
> +                       compatible = "hisilicon,504-nfc";
> +                       reg = <0x4020000 0x10000>, <0x5000000 0x1000>;
> +                       interrupts = <0 379 4>;
> +                       #address-cells = <1>;
> +                       #size-cells = <1>;
> +               };
>         };
>
>         etb@0,e3c42000 {
> --
> 1.9.1
>

Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org>

WARNING: multiple messages have this Message-ID (diff)
From: haojian.zhuang@linaro.org (Haojian Zhuang)
To: linux-arm-kernel@lists.infradead.org
Subject: [RESEND PATCH v3] mtd: hisilicon: add device tree node for NAND controller
Date: Thu, 26 Mar 2015 10:13:29 +0800	[thread overview]
Message-ID: <CAD6h2NQr_Z600vC+7RRuLgoGvV4MCXz8TAd4C5eCnqbA0ZdPWw@mail.gmail.com> (raw)
In-Reply-To: <1427267091-227474-1-git-send-email-wangzhou1@hisilicon.com>

On 25 March 2015 at 15:04, Zhou Wang <wangzhou1@hisilicon.com> wrote:
> This patch adds dts support for NAND flash controller of Hisilicon Soc Hip04.
> Now it is based on v4.0-rc5
>
> Changes in v3:
> - Change E-mail address in signed-off-by to "wangzhou1 at hisilicon.com"
> Changes in v2:
> - Base on v3.19-rc1
> - Use nand-ecc-strength, nand-ecc-step-size to replace hisi,nand-ecc-bits
> Changes in v1:
> - Move partition and other board related information into board dts file:
>   hip04-d01.dts
>
> Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
> ---
>  arch/arm/boot/dts/hip04-d01.dts | 27 +++++++++++++++++++++++++++
>  arch/arm/boot/dts/hip04.dtsi    |  7 +++++++
>  2 files changed, 34 insertions(+)
>
> diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts
> index 40a9e33..ba04dd5 100644
> --- a/arch/arm/boot/dts/hip04-d01.dts
> +++ b/arch/arm/boot/dts/hip04-d01.dts
> @@ -28,5 +28,32 @@
>                 uart0: uart at 4007000 {
>                         status = "ok";
>                 };
> +
> +               nand: nand at 4020000 {
> +                       nand-bus-width = <8>;
> +                       nand-ecc-mode = "hw";
> +                       nand-ecc-strength = <16>;
> +                       nand-ecc-step-size = <1024>;
> +
> +                       partition at 0 {
> +                               label = "nand_text";
> +                               reg = <0x00000000 0x00400000>;
> +                       };
> +
> +                       partition at 00400000 {
> +                               label = "nand_monitor";
> +                               reg = <0x00400000 0x00400000>;
> +                       };
> +
> +                       partition at 00800000 {
> +                               label = "nand_kernel";
> +                               reg = <0x00800000 0x00800000>;
> +                       };
> +
> +                       partition at 01000000 {
> +                               label = "nand_fs";
> +                               reg = <0x01000000 0x1f000000>;
> +                       };
> +               };
>         };
>  };
> diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
> index 2388145..ac32fce 100644
> --- a/arch/arm/boot/dts/hip04.dtsi
> +++ b/arch/arm/boot/dts/hip04.dtsi
> @@ -269,6 +269,13 @@
>                         interrupts = <0 372 4>;
>                 };
>
> +               nand: nand at 4020000 {
> +                       compatible = "hisilicon,504-nfc";
> +                       reg = <0x4020000 0x10000>, <0x5000000 0x1000>;
> +                       interrupts = <0 379 4>;
> +                       #address-cells = <1>;
> +                       #size-cells = <1>;
> +               };
>         };
>
>         etb at 0,e3c42000 {
> --
> 1.9.1
>

Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org>

  parent reply	other threads:[~2015-03-26  2:13 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-25  7:04 [RESEND PATCH v3] mtd: hisilicon: add device tree node for NAND controller Zhou Wang
2015-03-25  7:04 ` Zhou Wang
2015-03-25  7:04 ` Zhou Wang
     [not found] ` <1427267091-227474-1-git-send-email-wangzhou1-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
2015-03-26  2:13   ` Haojian Zhuang [this message]
2015-03-26  2:13     ` Haojian Zhuang
2015-03-26  2:13     ` Haojian Zhuang
     [not found]     ` <CAD6h2NQr_Z600vC+7RRuLgoGvV4MCXz8TAd4C5eCnqbA0ZdPWw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-03-26  4:53       ` Zhou Wang
2015-03-26  4:53         ` Zhou Wang
2015-03-26  4:53         ` Zhou Wang
2015-03-27 17:35   ` Brian Norris
2015-03-27 17:35     ` Brian Norris
2015-03-27 17:35     ` Brian Norris
2015-03-28  7:00     ` Zhou Wang
2015-03-28  7:00       ` Zhou Wang
2015-03-28  7:00       ` Zhou Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAD6h2NQr_Z600vC+7RRuLgoGvV4MCXz8TAd4C5eCnqbA0ZdPWw@mail.gmail.com \
    --to=haojian.zhuang-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
    --cc=arnd-r2nGTMty4D4@public.gmane.org \
    --cc=computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=liguozhu-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=wangzhou1-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
    --cc=xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.