[PATCH] arm64: dts: sc7180: Add clock controller nodes

[PATCH] arm64: dts: sc7180: Add clock controller nodes

[Taniya Das]

Add the display, video & graphics clock controller nodes supported on
SC7180.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 3676bfd..3bb7b65 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -931,6 +931,18 @@
 			};
 		};

+		gpucc: clock-controller@5090000 {
+			compatible = "qcom,sc7180-gpucc";
+			reg = <0 0x05090000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo", "gpll0_main", "gpll0_div";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		qspi: spi@88dc000 {
 			compatible = "qcom,qspi-v1";
 			reg = <0 0x088dc000 0 0x600>;
@@ -1043,6 +1055,27 @@
 			};
 		};

+		videocc: clock-controller@ab00000 {
+			compatible = "qcom,sc7180-videocc";
+			reg = <0 0x0ab00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "bi_tcxo";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sc7180-dispcc";
+			reg = <0 0x0af00000 0 0x200000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_DISP_GPLL0_CLK_SRC>;
+			clock-names = "bi_tcxo", "gpll0";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sc7180-pdc", "qcom,pdc";
 			reg = <0 0x0b220000 0 0x30000>;
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.

Re: [PATCH] arm64: dts: sc7180: Add clock controller nodes

[Doug Anderson]

Hi,

On Fri, Dec 27, 2019 at 12:38 AM Taniya Das <tdas@codeaurora.org> wrote:
>
> Add the display, video & graphics clock controller nodes supported on
> SC7180.
>
> Signed-off-by: Taniya Das <tdas@codeaurora.org>
> ---
>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 33 +++++++++++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)

Can you add these to your patch?

#include <dt-bindings/clock/qcom,dispcc-sc7180.h>
#include <dt-bindings/clock/qcom,gpucc-sc7180.h>

...otherwise the first user of each of the clocks will need to add the
#include and depending on what order patches landed things can get
weird.  I think it's cleaner to assume that there will soon be a user
and proactively add the #includes.

NOTE: at least one user of your patch can be found at
<https://lore.kernel.org/r/1579621928-18619-1-git-send-email-harigovi@codeaurora.org>.
They don't add the #includes which means they don't compile atop your
patch.


> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 3676bfd..3bb7b65 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -931,6 +931,18 @@
>                         };
>                 };
>
> +               gpucc: clock-controller@5090000 {
> +                       compatible = "qcom,sc7180-gpucc";
> +                       reg = <0 0x05090000 0 0x9000>;
> +                       clocks = <&rpmhcc RPMH_CXO_CLK>,
> +                                <&gcc GCC_GPU_GPLL0_CLK_SRC>,
> +                                <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
> +                       clock-names = "bi_tcxo", "gpll0_main", "gpll0_div";
> +                       #clock-cells = <1>;
> +                       #reset-cells = <1>;
> +                       #power-domain-cells = <1>;
> +               };
> +
>                 qspi: spi@88dc000 {
>                         compatible = "qcom,qspi-v1";
>                         reg = <0 0x088dc000 0 0x600>;
> @@ -1043,6 +1055,27 @@
>                         };
>                 };
>
> +               videocc: clock-controller@ab00000 {
> +                       compatible = "qcom,sc7180-videocc";
> +                       reg = <0 0x0ab00000 0 0x10000>;
> +                       clocks = <&rpmhcc RPMH_CXO_CLK>;
> +                       clock-names = "bi_tcxo";
> +                       #clock-cells = <1>;
> +                       #reset-cells = <1>;
> +                       #power-domain-cells = <1>;
> +               };
> +
> +               dispcc: clock-controller@af00000 {
> +                       compatible = "qcom,sc7180-dispcc";
> +                       reg = <0 0x0af00000 0 0x200000>;
> +                       clocks = <&rpmhcc RPMH_CXO_CLK>,
> +                                <&gcc GCC_DISP_GPLL0_CLK_SRC>;
> +                       clock-names = "bi_tcxo", "gpll0";

The above doesn't match your code unless I'm missing a patch
somewhere.  Specifically I find that if I use your dts patch together
with the upstream code I get a nice crash at bootup.  I tracked it
down to the fact that the code uses the name "gcc_disp_gpll0_clk_src"
but your dts uses the name "gpll0".  Specifically this bit of code:

static const struct clk_parent_data disp_cc_parent_data_3[] = {
        { .fw_name = "bi_tcxo" },
        { .hw = &disp_cc_pll0.clkr.hw },
        { .fw_name = "gcc_disp_gpll0_clk_src" },
        { .hw = &disp_cc_pll0_out_even.clkr.hw },
        { .fw_name = "core_bi_pll_test_se", .name = "core_bi_pll_test_se" },
};

static const struct clk_parent_data disp_cc_parent_data_4[] = {
        { .fw_name = "bi_tcxo" },
        { .fw_name = "gcc_disp_gpll0_clk_src" },
        { .fw_name = "core_bi_pll_test_se", .name = "core_bi_pll_test_se" },
};

If I either change the code to use "gpll0" or change your dts to use
"gcc_disp_gpll0_clk_src" I can avoid the crash.

I believe there is a similar problem with the gpucc with
"gcc_gpu_gpll0_div_clk_src" / "gpll0_div".


-Doug

Re: [PATCH] arm64: dts: sc7180: Add clock controller nodes

[Doug Anderson]

Hi,

On Wed, Jan 22, 2020 at 4:46 PM Doug Anderson <dianders@chromium.org> wrote:
>
> Hi,
>
> On Fri, Dec 27, 2019 at 12:38 AM Taniya Das <tdas@codeaurora.org> wrote:
> >
> > Add the display, video & graphics clock controller nodes supported on
> > SC7180.
> >
> > Signed-off-by: Taniya Das <tdas@codeaurora.org>
> > ---
> >  arch/arm64/boot/dts/qcom/sc7180.dtsi | 33 +++++++++++++++++++++++++++++++++
> >  1 file changed, 33 insertions(+)
>
> Can you add these to your patch?
>
> #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
> #include <dt-bindings/clock/qcom,gpucc-sc7180.h>
>
> ...otherwise the first user of each of the clocks will need to add the
> #include and depending on what order patches landed things can get
> weird.  I think it's cleaner to assume that there will soon be a user
> and proactively add the #includes.
>
> NOTE: at least one user of your patch can be found at
> <https://lore.kernel.org/r/1579621928-18619-1-git-send-email-harigovi@codeaurora.org>.
> They don't add the #includes which means they don't compile atop your
> patch.

Breadcrumbs that I addressed my own feedback because I wanted to
include Taniya's patch atop my series.  See:

https://lore.kernel.org/r/20200124144154.v2.10.I1a4b93fb005791e29a9dcf288fc8bd459a555a59@changeid

-Doug