* [PATCH v3] arm64: dts: sc7180: Move venus node to the correct position
@ 2020-02-27 17:26 Matthias Kaehlcke
2020-02-27 18:19 ` Doug Anderson
0 siblings, 1 reply; 2+ messages in thread
From: Matthias Kaehlcke @ 2020-02-27 17:26 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Rob Herring, Mark Rutland, Dikshita Agarwal
Cc: linux-arm-msm, Douglas Anderson, linux-kernel, devicetree,
Matthias Kaehlcke
Per convention device nodes for SC7180 should be ordered by address.
This is currently not the case for the venus node, move it to the
correct position.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
---
Changes in v3:
- actually insert the venus node after usb@a6f8800 and not just
pretend to do it
Changes in v2:
- insert the venus node *after* the usb@a6f8800 node, not before
arch/arm64/boot/dts/qcom/sc7180.dtsi | 52 ++++++++++++++--------------
1 file changed, 26 insertions(+), 26 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 253274d5f04cb..31bf210f2e0b1 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1376,6 +1376,32 @@ usb_1_dwc3: dwc3@a600000 {
};
};
+ venus: video-codec@aa00000 {
+ compatible = "qcom,sc7180-venus";
+ reg = <0 0x0aa00000 0 0xff000>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&videocc VENUS_GDSC>,
+ <&videocc VCODEC0_GDSC>;
+ power-domain-names = "venus", "vcodec0";
+ clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
+ <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+ <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
+ <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
+ <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
+ clock-names = "core", "iface", "bus",
+ "vcodec0_core", "vcodec0_bus";
+ iommus = <&apps_smmu 0x0c00 0x60>;
+ memory-region = <&venus_mem>;
+
+ video-decoder {
+ compatible = "venus-decoder";
+ };
+
+ video-encoder {
+ compatible = "venus-encoder";
+ };
+ };
+
videocc: clock-controller@ab00000 {
compatible = "qcom,sc7180-videocc";
reg = <0 0x0ab00000 0 0x10000>;
@@ -1538,32 +1564,6 @@ dispcc: clock-controller@af00000 {
#power-domain-cells = <1>;
};
- venus: video-codec@aa00000 {
- compatible = "qcom,sc7180-venus";
- reg = <0 0x0aa00000 0 0xff000>;
- interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&videocc VENUS_GDSC>,
- <&videocc VCODEC0_GDSC>;
- power-domain-names = "venus", "vcodec0";
- clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
- <&videocc VIDEO_CC_VENUS_AHB_CLK>,
- <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
- <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
- <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
- clock-names = "core", "iface", "bus",
- "vcodec0_core", "vcodec0_bus";
- iommus = <&apps_smmu 0x0c00 0x60>;
- memory-region = <&venus_mem>;
-
- video-decoder {
- compatible = "venus-decoder";
- };
-
- video-encoder {
- compatible = "venus-encoder";
- };
- };
-
pdc: interrupt-controller@b220000 {
compatible = "qcom,sc7180-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>;
--
2.25.1.481.gfbce0eb801-goog
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v3] arm64: dts: sc7180: Move venus node to the correct position
2020-02-27 17:26 [PATCH v3] arm64: dts: sc7180: Move venus node to the correct position Matthias Kaehlcke
@ 2020-02-27 18:19 ` Doug Anderson
0 siblings, 0 replies; 2+ messages in thread
From: Doug Anderson @ 2020-02-27 18:19 UTC (permalink / raw)
To: Matthias Kaehlcke
Cc: Andy Gross, Bjorn Andersson, Rob Herring, Mark Rutland,
Dikshita Agarwal, linux-arm-msm, LKML,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
Hi,
On Thu, Feb 27, 2020 at 9:26 AM Matthias Kaehlcke <mka@chromium.org> wrote:
>
> Per convention device nodes for SC7180 should be ordered by address.
> This is currently not the case for the venus node, move it to the
> correct position.
>
> Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
> ---
>
> Changes in v3:
> - actually insert the venus node after usb@a6f8800 and not just
> pretend to do it
>
> Changes in v2:
> - insert the venus node *after* the usb@a6f8800 node, not before
>
> arch/arm64/boot/dts/qcom/sc7180.dtsi | 52 ++++++++++++++--------------
> 1 file changed, 26 insertions(+), 26 deletions(-)
Reviewed-by: Douglas Anderson <dianders@chromium.org>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-02-27 18:19 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-27 17:26 [PATCH v3] arm64: dts: sc7180: Move venus node to the correct position Matthias Kaehlcke
2020-02-27 18:19 ` Doug Anderson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.