From: Daniel Smith <viscous.liquid@gmail.com> To: 李刚 <gang.li@watchdata.com> Cc: linux-wireless@vger.kernel.org, Ath9k Devel List <ath9k-devel@lists.ath9k.org> Subject: Re: Question about IEEE80211_TX_CTL_NO_ACK in ath_9k Date: Mon, 19 Dec 2011 08:43:17 -0500 [thread overview] Message-ID: <CADGLRPmkbTp-azGJ2=CJum=Y8Mrf7fTbaE9Oi8Om+DQyu7d9uA@mail.gmail.com> (raw) In-Reply-To: <20111219125052.3B5A42005C@mail.watchdata.com.cn> 2011/12/19 李刚 <gang.li@watchdata.com>: > > Hi, Daniel, Thanks you ! > > Sorry, I didn't make it clear! My 9280 is an USB card, so the related code > is htc_drv_*.c. No worries, I just was not aware of any USB devices with the 9280 in it and the ath9k_htc "supported chips" are the 9271 and 7010. > I have seen these codes in tx.c, and at first I thought it should work, but > does not. So will assume you dealt with this then. I have not done a lot of delving into the ath9k_htc code myself and I am not familiar with interfacing with the chips via USB. Normally with a 9280 where the tx ctrl descriptors are DMA'ed in I just need to make sure that bit 24 of the third tx ctrl descriptor is set to 1. I did a cursory look at how a frame is handed from kernel down to hardware and the hardware control is done through flags set on a struct tx_frame_hdr. I looked at the flags defined for ath9k_htc and I see no sign of a flag to control ACK's. So I think this has to be punted to one of the Atheros guys or someone with the spec sheets that can say if there is a bit in the flags field to turn off ACK. Sorry I couldn't be much more help. Daniel
WARNING: multiple messages have this Message-ID (diff)
From: Daniel Smith <viscous.liquid@gmail.com> To: ath9k-devel@lists.ath9k.org Subject: [ath9k-devel] Question about IEEE80211_TX_CTL_NO_ACK in ath_9k Date: Mon, 19 Dec 2011 08:43:17 -0500 [thread overview] Message-ID: <CADGLRPmkbTp-azGJ2=CJum=Y8Mrf7fTbaE9Oi8Om+DQyu7d9uA@mail.gmail.com> (raw) In-Reply-To: <20111219125052.3B5A42005C@mail.watchdata.com.cn> 2011/12/19 ?? <gang.li@watchdata.com>: > > Hi, Daniel, Thanks you ! > > Sorry, I didn't make it clear! My 9280 is an USB card, so the related code > is htc_drv_*.c. No worries, I just was not aware of any USB devices with the 9280 in it and the ath9k_htc "supported chips" are the 9271 and 7010. > I have seen these codes in tx.c, and at first I thought it should work, but > does not. So will assume you dealt with this then. I have not done a lot of delving into the ath9k_htc code myself and I am not familiar with interfacing with the chips via USB. Normally with a 9280 where the tx ctrl descriptors are DMA'ed in I just need to make sure that bit 24 of the third tx ctrl descriptor is set to 1. I did a cursory look at how a frame is handed from kernel down to hardware and the hardware control is done through flags set on a struct tx_frame_hdr. I looked at the flags defined for ath9k_htc and I see no sign of a flag to control ACK's. So I think this has to be punted to one of the Atheros guys or someone with the spec sheets that can say if there is a bit in the flags field to turn off ACK. Sorry I couldn't be much more help. Daniel
next prev parent reply other threads:[~2011-12-19 13:43 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2011-12-17 23:18 Question about TCP Checksum errors Larry Finger 2011-12-17 23:43 ` Eric Dumazet 2011-12-19 11:38 ` Question about IEEE80211_TX_CTL_NO_ACK in ath_9k 李刚 2011-12-19 12:33 ` Mohammed Shafi 2011-12-19 13:03 ` 李刚 2011-12-19 12:33 ` Daniel Smith 2011-12-19 13:00 ` 李刚 2011-12-19 13:43 ` Daniel Smith [this message] 2011-12-19 13:43 ` [ath9k-devel] " Daniel Smith 2011-12-30 8:15 ` Question: ieee80211_rx called twice after one ieee80211_subif_start_xmit call 李刚 2011-12-30 8:15 ` [ath9k-devel] " 李刚 2011-12-30 9:30 ` Adrian Chadd 2011-12-30 9:30 ` [ath9k-devel] " Adrian Chadd 2011-12-30 11:13 ` [ath9k-devel] 答复: " 李刚 2012-01-07 2:11 ` Question about duration of data frame in ath9k_htc 李刚 2012-01-07 2:11 ` [ath9k-devel] " 李刚 2012-01-07 5:31 ` Sujith Manoharan 2012-01-07 5:31 ` [ath9k-devel] " Sujith Manoharan 2011-12-19 13:07 ` Question about IEEE80211_TX_CTL_NO_ACK in ath_9k Helmut Schaa 2011-12-19 14:42 ` Sujith 2011-12-20 5:39 ` 李刚 2011-12-20 15:24 ` Sujith
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to='CADGLRPmkbTp-azGJ2=CJum=Y8Mrf7fTbaE9Oi8Om+DQyu7d9uA@mail.gmail.com' \ --to=viscous.liquid@gmail.com \ --cc=ath9k-devel@lists.ath9k.org \ --cc=gang.li@watchdata.com \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.