All of lore.kernel.org
 help / color / mirror / Atom feed
* BCM4352 Broadcom support
@ 2022-11-25 19:51 Ioannis Barkas
  0 siblings, 0 replies; only message in thread
From: Ioannis Barkas @ 2022-11-25 19:51 UTC (permalink / raw)
  To: linux-wireless

Hello,

I have tested a hybrid laptop device which is actually a tablet(YOGA 3
Pro-1370) and has a BCM Wi-Fi.

On Ubuntu boot I get:
[    2.294215] bcma-pci-bridge 0000:01:00.0: bus0: Found chip with id
0x4352, rev 0x03 and package 0x00
[    2.294263] bcma-pci-bridge 0000:01:00.0: bus0: Core 0 found:
ChipCommon (manuf 0x4BF, id 0x800, rev 0x2B, class 0x0)
[    2.294290] bcma-pci-bridge 0000:01:00.0: bus0: Core 1 found: IEEE
802.11 (manuf 0x4BF, id 0x812, rev 0x2A, class 0x0)
[    2.294348] bcma-pci-bridge 0000:01:00.0: bus0: Core 2 found: ARM
CR4 (manuf 0x4BF, id 0x83E, rev 0x02, class 0x0)
[    2.294398] bcma-pci-bridge 0000:01:00.0: bus0: Core 3 found: PCIe
Gen2 (manuf 0x4BF, id 0x83C, rev 0x01, class 0x0)
[    2.294424] bcma-pci-bridge 0000:01:00.0: bus0: Core 4 found: USB
2.0 Device (manuf 0x4BF, id 0x81A, rev 0x11, class 0x0)
[    2.332079] cryptd: max_cpu_qlen set to 1000
[    2.350696] bcma: Unsupported SPROM revision: 11
[    2.350760] bcma-pci-bridge 0000:01:00.0: bus0: Invalid SPROM read
from the PCIe card, trying to use fallback SPROM
[    2.350764] bcma-pci-bridge 0000:01:00.0: bus0: Using fallback
SPROM failed (err -2)
[    2.350767] bcma-pci-bridge 0000:01:00.0: bus0: No SPROM available
[    2.353785] bcma-pci-bridge 0000:01:00.0: bus0: Bus registered
[   34.766808] b43-phy0: Broadcom 4352 WLAN found (core revision 42)
[   34.787320] bcma-pci-bridge 0000:01:00.0: bus0: HT force timeout
[   34.930930] bcma-pci-bridge 0000:01:00.0: bus0: PLL enable timeout
[   34.930980] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 12, Type
11 (AC), Revision 1)
[   34.931036] b43: probe of bcma0:1 failed with error -95
[   34.931136] Broadcom 43xx driver loaded [ Features: PNL ]

This is the device:
01:00.0 Network controller [0280]: Broadcom Inc. and subsidiaries
BCM4352 802.11ac Wireless Network Adapter [14e4:43b1] (rev 03)
    Subsystem: Lenovo BCM4352 802.11ac Wireless Network Adapter [17aa:0623]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 18
    Region 0: Memory at c1200000 (64-bit, non-prefetchable) [size=32K]
    Region 2: Memory at c1000000 (64-bit, non-prefetchable) [size=2M]
    Capabilities: [48] Power Management version 3
        Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-
    Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit+
        Address: 0000000000000000  Data: 0000
    Capabilities: [68] Vendor Specific Information: Len=44 <?>
    Capabilities: [ac] Express (v2) Endpoint, MSI 00
        DevCap:    MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<4us, L1 unlimited
            ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 10W
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+
            MaxPayload 128 bytes, MaxReadReq 512 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
        LnkCap:    Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit
Latency L0s <2us, L1 <32us
            ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
        LnkCtl:    ASPM L0s L1 Enabled; RCB 64 bytes, Disabled- CommClk+
            ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s, Width x1
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Via WAKE#, ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
             FRS- TPHComp- ExtTPHComp-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
10BitTagReq- OBFF Disabled,
             AtomicOpsCtl: ReqEn-
        LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
             Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
             Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
        LnkSta2: Current De-emphasis Level: -3.5dB,
EqualizationComplete- EqualizationPhase1-
             EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UESvrt:    DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
        CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
        CEMsk:    RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
        AERCap:    First Error Pointer: 00, ECRCGenCap+ ECRCGenEn-
ECRCChkCap+ ECRCChkEn-
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
    Capabilities: [13c v0] Device Serial Number ac-d1-00-ff-**-**-**-**
    Capabilities: [150 v1] Power Budgeting <?>
    Capabilities: [160 v1] Virtual Channel
        Caps:    LPEVC=0 RefClk=100ns PATEntryBits=1
        Arb:    Fixed- WRR32- WRR64- WRR128-
        Ctrl:    ArbSelect=Fixed
        Status:    InProgress-
        VC0:    Caps:    PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
            Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
            Ctrl:    Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
            Status:    NegoPending- InProgress-
    Kernel driver in use: bcma-pci-bridge
    Kernel modules: bcma
00: e4 14 b1 43 06 00 10 00 03 00 80 02 10 00 00 00
10: 04 00 20 c1 00 00 00 00 04 00 00 c1 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 23 06
30: 00 00 00 00 48 00 00 00 00 00 00 00 ff 01 00 00
40: 00 00 00 00 00 00 00 00 01 58 03 fe 08 40 00 00
50: 00 00 00 00 00 00 00 00 05 68 80 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 09 ac 44 00 01 01 00 00
70: 00 10 10 18 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 10 00 18 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 40 00 05 00 10 00 02 00
b0: 81 8f 90 05 10 2c 10 00 11 dc 46 00 43 01 11 10
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 1f 00 08 00 00 00 00 00 00 00 00 00 01 00 01 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
100: 01 00 c1 13 00 00 00 00 00 00 00 00 30 20 06 00
110: 00 00 00 00 00 20 00 00 a0 00 00 00 00 00 00 00
120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
130: 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 15

As it says UNSUPPORTED PHY and 43b1 is not supported with no
alternative as can be seen[1], can this device be used? What is the
SPROM issue about?

[1]https://wireless.wiki.kernel.org/en/users/Drivers/b43

^ permalink raw reply	[flat|nested] only message in thread
only message in thread, other threads:[~2022-11-24 19:52 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-11-25 19:51 BCM4352 Broadcom support Ioannis Barkas

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.