* [lm-sensors] Nuvoton NCT6791D support
@ 2013-11-11 5:25 p. stephen w
2013-11-11 14:28 ` Guenter Roeck
` (44 more replies)
0 siblings, 45 replies; 46+ messages in thread
From: p. stephen w @ 2013-11-11 5:25 UTC (permalink / raw)
To: lm-sensors
SGV5IGd1eXMsCkknZCBiZSBoYXBweSB0byBjb250cmlidXRlICQ1MCB0byBnZXQgdGhpcyBjaGlw
IHN1cHBvcnRlZCB2aWEKc2Vuc29ycy1kZXRlY3QuICBUaGUgd2Vla2VuZHMgb3ZlciwgYW5kIEkg
aGF2ZSBub3QgYmVlbiBhYmxlIHRvIGdldCBpdAppbnN0YWxsZWQgYXMgYSBzdGFuZCBhbG9uZSBk
cml2ZXIgZnJvbSB0aGUgR2l0SHViIHJlcG8uICBJIGhhdmUgc29tZSBBcGFjaGUKZXhwZXJpZW5j
ZSwgYnV0IGFtIGNsdWVsZXNzIGFib3V0IExpbnV4OyBJJ20gcnVubmluZyB0aGUgbGF0ZXN0IE1p
bnQKZGlzdHJvLiAgIEknbSBzdXJlIHRoZXJlJ3MgYSB3YXksIGJ1dCBJIGRvbid0IGtub3cgaXQu
CgrigItJZiBpdHMgb2YgaW50ZXJlc3QsIHRoaXMgaXMgZm9yIGFuIEFzdXMgWjg3aS1EZWx1eGUg
Ym9hcmQuICBZZXMsIGl0cyBPQydkLAp3aGljaCBpcyB3aHkgSSBuZWVkIHRoZSBQV00gY29udHJv
bC4KCgoKS2VlcCB1cCB0aGUgZ29vZCB3b3JrLuKAiwoKCl9fX19fX19fX19fX19fX19fX19fX19f
X19fX19fClN0ZXBoZW4gV2lsbGUgfCBwc3RlcGhlbndpbGxlLmNvbQoqbmV3IGFkZHJlc3MgcC5z
dGVwaGVud2lsbGVAZ21haWwuY29tIDxwLnN0ZXBoZW53aWxsZUBnbWFpbC5jb20+KgpfX19fX19f
X19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fXwpsbS1zZW5zb3JzIG1haWxp
bmcgbGlzdApsbS1zZW5zb3JzQGxtLXNlbnNvcnMub3JnCmh0dHA6Ly9saXN0cy5sbS1zZW5zb3Jz
Lm9yZy9tYWlsbWFuL2xpc3RpbmZvL2xtLXNlbnNvcnM
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
@ 2013-11-11 14:28 ` Guenter Roeck
2013-11-11 17:04 ` p. stephen w
` (43 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: Guenter Roeck @ 2013-11-11 14:28 UTC (permalink / raw)
To: lm-sensors
On 11/10/2013 09:25 PM, p. stephen w wrote:
> Hey guys,
> I'd be happy to contribute $50 to get this chip supported via
> sensors-detect. The weekends over, and I have not been able to get it
> installed as a stand alone driver from the GitHub repo. I have some Apache
> experience, but am clueless about Linux; I'm running the latest Mint
> distro. I'm sure there's a way, but I don't know it.
>
Hi Stephen,
Can you provide details ? Both sensors-detect and the upstream kernel (3.12)
support the chip, and the nct6775 driver on github should work as well.
If it doesn't, it might be useful to tell us what exactly doesn't work for you.
Thanks,
Guenter
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
2013-11-11 14:28 ` Guenter Roeck
@ 2013-11-11 17:04 ` p. stephen w
2013-11-11 17:38 ` Guenter Roeck
` (42 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: p. stephen w @ 2013-11-11 17:04 UTC (permalink / raw)
To: lm-sensors
[-- Attachment #1: Type: text/plain, Size: 2019 bytes --]
Please see attached.
______________________________________
If I had to guess, I may be installing the GitHub driver incorrectly.
Here's what I do....
I clone the repo into my home dir, and run 'make -B', or 'make all'. The
output is...
Building modules, stage 2.
MODPOST 1 modules
Looking in the /kernel/drivers/hwmon/, I do not see the nct6791d.ko file,
which I expected. I do have 'nct_thermistor.ko'. The led me to suspect
something went wrong with the install.
Running sensors-detect only finds the Intel CPU sensors.
Running pwmconfig does not detect any sensors. There are two PWM devices;
1 fan and 1 pump on the CPU header. These work fine under Windows 7 and
the Asus AI 3 utility.
I've also manually installed the latest lm-sensors, again by downloading
into my home dir, and running the make commands; make user, and make_detect
(i think). Attached is the output from running sensors-detect.
Uname -a:
Linux Mint 3.8.0-19-generic #29-Ubuntu SMP Wed Apr 17 18:16:28 UTC 2013
x86_64 x86_64 x86_64 GNU/Linux
Hopefully this helps. Let me know if you need more info.
On Mon, Nov 11, 2013 at 6:28 AM, Guenter Roeck <linux@roeck-us.net> wrote:
> On 11/10/2013 09:25 PM, p. stephen w wrote:
>
>> Hey guys,
>> I'd be happy to contribute $50 to get this chip supported via
>> sensors-detect. The weekends over, and I have not been able to get it
>> installed as a stand alone driver from the GitHub repo. I have some
>> Apache
>> experience, but am clueless about Linux; I'm running the latest Mint
>> distro. I'm sure there's a way, but I don't know it.
>>
>>
> Hi Stephen,
>
> Can you provide details ? Both sensors-detect and the upstream kernel
> (3.12)
> support the chip, and the nct6775 driver on github should work as well.
> If it doesn't, it might be useful to tell us what exactly doesn't work for
> you.
>
> Thanks,
> Guenter
>
>
--
_____________________________
Stephen Wille | pstephenwille.com
*new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
[-- Attachment #2: sensorsDetect.txt --]
[-- Type: text/plain, Size: 57545 bytes --]
acpitz-virtual-0
Adapter: Virtual device
temp1: +27.8°C (crit = +105.0°C)
temp2: +29.8°C (crit = +105.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +33.0°C (high = +80.0°C, crit = +100.0°C)
Core 0: +31.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +30.0°C (high = +80.0°C, crit = +100.0°C)
Core 2: +32.0°C (high = +80.0°C, crit = +100.0°C)
Core 3: +30.0°C (high = +80.0°C, crit = +100.0°C)
===========================
# sensors-detect revision 6170 (2013-05-20 21:25:22 +0200)
# System: ASUS All Series
# Board: ASUSTeK COMPUTER INC. Z87I-DELUXE
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): y
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... No
AMD Family 15h power sensors... No
AMD Family 16h power sensors... No
Intel digital thermal sensor... Success!
(driver `coretemp')
Intel AMB FB-DIMM thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): y
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... Yes
Found unknown chip with ID 0xc803
(logical device B has address 0x290, could be sensors)
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no): y
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): y
Using driver `i2c-i801' for device 0000:00:1f.3: Intel Lynx Point (PCH)
Next adapter: i915 gmbus ssc (i2c-0)
Do you want to scan it? (yes/NO/selectively): y
Next adapter: i915 gmbus vga (i2c-1)
Do you want to scan it? (yes/NO/selectively): y
Next adapter: i915 gmbus panel (i2c-2)
Do you want to scan it? (yes/NO/selectively): y
Next adapter: i915 gmbus dpc (i2c-3)
Do you want to scan it? (yes/NO/selectively): y
Next adapter: i915 gmbus dpb (i2c-4)
Do you want to scan it? (yes/NO/selectively): y
Next adapter: i915 gmbus dpd (i2c-5)
Do you want to scan it? (yes/NO/selectively): y
Next adapter: DPDDC-B (i2c-6)
Do you want to scan it? (YES/no/selectively): y
Client found at address 0x18
Probing for `Analog Devices ADM1021'... No
Probing for `Analog Devices ADM1021A/ADM1023'... No
Probing for `Maxim MAX1617'... No
Probing for `Maxim MAX1617A'... No
Probing for `Maxim MAX1668'... No
Probing for `Maxim MAX1805'... No
Probing for `Maxim MAX1989'... No
Probing for `Maxim MAX6655/MAX6656'... No
Probing for `TI THMC10'... No
Probing for `National Semiconductor LM84'... No
Probing for `Genesys Logic GL523SM'... No
Probing for `Onsemi MC1066'... No
Probing for `Maxim MAX1618'... No
Probing for `Maxim MAX1619'... No
Probing for `National Semiconductor LM82/LM83'... No
Probing for `Maxim MAX6654'... No
Probing for `Maxim MAX6690'... No
Probing for `Maxim MAX6680/MAX6681'... No
Probing for `Maxim MAX6695/MAX6696'... No
Probing for `Texas Instruments AMC6821'... No
Probing for `National Semiconductor LM95234'... No
Probing for `National Semiconductor LM95245'... No
Probing for `National Semiconductor LM64'... No
Probing for `SMSC EMC1047'... No
Probing for `SMSC EMC1402'... No
Probing for `SMSC EMC1403'... No
Probing for `SMSC EMC1404'... No
Probing for `ST STTS424'... No
Probing for `ST STTS424E'... No
Probing for `ST STTS2002'... No
Probing for `ST STTS3000'... No
Probing for `NXP SE97/SE97B'... No
Probing for `NXP SE98'... No
Probing for `Analog Devices ADT7408'... No
Probing for `IDT TS3000/TSE2002'... No
Probing for `Maxim MAX6604'... No
Probing for `Microchip MCP9804'... No
Probing for `Microchip MCP98242'... No
Probing for `Microchip MCP98243'... No
Probing for `Microchip MCP98244'... No
Probing for `Microchip MCP9843'... No
Probing for `ON CAT6095/CAT34TS02'... No
Probing for `Atmel AT30TS00'... No
Client found at address 0x19
Probing for `Analog Devices ADM1021'... No
Probing for `Analog Devices ADM1021A/ADM1023'... No
Probing for `Maxim MAX1617'... No
Probing for `Maxim MAX1617A'... No
Probing for `Maxim MAX1668'... No
Probing for `Maxim MAX1805'... No
Probing for `Maxim MAX1989'... No
Probing for `Maxim MAX6655/MAX6656'... No
Probing for `TI THMC10'... No
Probing for `National Semiconductor LM84'... No
Probing for `Genesys Logic GL523SM'... No
Probing for `Onsemi MC1066'... No
Probing for `Maxim MAX1618'... No
Probing for `Maxim MAX1619'... No
Probing for `National Semiconductor LM82/LM83'... No
Probing for `Maxim MAX6654'... No
Probing for `Maxim MAX6690'... No
Probing for `Maxim MAX6680/MAX6681'... No
Probing for `Maxim MAX6695/MAX6696'... No
Probing for `Texas Instruments AMC6821'... No
Probing for `National Semiconductor LM95231'... No
Probing for `National Semiconductor LM95241'... No
Probing for `National Semiconductor LM95245'... No
Probing for `ST STTS424'... No
Probing for `ST STTS424E'... No
Probing for `ST STTS2002'... No
Probing for `ST STTS3000'... No
Probing for `NXP SE97/SE97B'... No
Probing for `NXP SE98'... No
Probing for `Analog Devices ADT7408'... No
Probing for `IDT TS3000/TSE2002'... No
Probing for `Maxim MAX6604'... No
Probing for `Microchip MCP9804'... No
Probing for `Microchip MCP98242'... No
Probing for `Microchip MCP98243'... No
Probing for `Microchip MCP98244'... No
Probing for `Microchip MCP9843'... No
Probing for `ON CAT6095/CAT34TS02'... No
Probing for `Atmel AT30TS00'... No
Client found at address 0x1a
Probing for `Analog Devices ADM1021'... No
Probing for `Analog Devices ADM1021A/ADM1023'... No
Probing for `Maxim MAX1617'... No
Probing for `Maxim MAX1617A'... No
Probing for `Maxim MAX1668'... No
Probing for `Maxim MAX1805'... No
Probing for `Maxim MAX1989'... No
Probing for `Maxim MAX6655/MAX6656'... No
Probing for `TI THMC10'... No
Probing for `National Semiconductor LM84'... No
Probing for `Genesys Logic GL523SM'... No
Probing for `Onsemi MC1066'... No
Probing for `Maxim MAX1618'... No
Probing for `Maxim MAX1619'... No
Probing for `National Semiconductor LM82/LM83'... No
Probing for `Maxim MAX6654'... No
Probing for `Maxim MAX6690'... No
Probing for `Maxim MAX6680/MAX6681'... No
Probing for `Maxim MAX6695/MAX6696'... No
Probing for `Texas Instruments AMC6821'... No
Probing for `ST STTS424'... No
Probing for `ST STTS424E'... No
Probing for `ST STTS2002'... No
Probing for `ST STTS3000'... No
Probing for `NXP SE97/SE97B'... No
Probing for `NXP SE98'... No
Probing for `Analog Devices ADT7408'... No
Probing for `IDT TS3000/TSE2002'... No
Probing for `Maxim MAX6604'... No
Probing for `Microchip MCP9804'... No
Probing for `Microchip MCP98242'... No
Probing for `Microchip MCP98243'... No
Probing for `Microchip MCP98244'... No
Probing for `Microchip MCP9843'... No
Probing for `ON CAT6095/CAT34TS02'... No
Probing for `Atmel AT30TS00'... No
Client found at address 0x1b
Probing for `ST STTS424'... No
Probing for `ST STTS424E'... No
Probing for `ST STTS2002'... No
Probing for `ST STTS3000'... No
Probing for `NXP SE97/SE97B'... No
Probing for `NXP SE98'... No
Probing for `Analog Devices ADT7408'... No
Probing for `IDT TS3000/TSE2002'... No
Probing for `Maxim MAX6604'... No
Probing for `Microchip MCP9804'... No
Probing for `Microchip MCP98242'... No
Probing for `Microchip MCP98243'... No
Probing for `Microchip MCP98244'... No
Probing for `Microchip MCP9843'... No
Probing for `ON CAT6095/CAT34TS02'... No
Probing for `Atmel AT30TS00'... No
Client found at address 0x1c
Probing for `Texas Instruments TMP421'... No
Probing for `SMSC EMC1072'... No
Probing for `SMSC EMC1073'... No
Probing for `SMSC EMC1074'... No
Probing for `ST STTS424'... No
Probing for `ST STTS424E'... No
Probing for `ST STTS2002'... No
Probing for `ST STTS3000'... No
Probing for `NXP SE97/SE97B'... No
Probing for `NXP SE98'... No
Probing for `Analog Devices ADT7408'... No
Probing for `IDT TS3000/TSE2002'... No
Probing for `Maxim MAX6604'... No
Probing for `Microchip MCP9804'... No
Probing for `Microchip MCP98242'... No
Probing for `Microchip MCP98243'... No
Probing for `Microchip MCP98244'... No
Probing for `Microchip MCP9843'... No
Probing for `ON CAT6095/CAT34TS02'... No
Probing for `Atmel AT30TS00'... No
Client found at address 0x1d
Probing for `Texas Instruments TMP421'... No
Probing for `ST STTS424'... No
Probing for `ST STTS424E'... No
Probing for `ST STTS2002'... No
Probing for `ST STTS3000'... No
Probing for `NXP SE97/SE97B'... No
Probing for `NXP SE98'... No
Probing for `Analog Devices ADT7408'... No
Probing for `IDT TS3000/TSE2002'... No
Probing for `Maxim MAX6604'... No
Probing for `Microchip MCP9804'... No
Probing for `Microchip MCP98242'... No
Probing for `Microchip MCP98243'... No
Probing for `Microchip MCP98244'... No
Probing for `Microchip MCP9843'... No
Probing for `ON CAT6095/CAT34TS02'... No
Probing for `Atmel AT30TS00'... No
Client found at address 0x1e
Probing for `Texas Instruments TMP421'... No
Probing for `ST STTS424'... No
Probing for `ST STTS424E'... No
Probing for `ST STTS2002'... No
Probing for `ST STTS3000'... No
Probing for `NXP SE97/SE97B'... No
Probing for `NXP SE98'... No
Probing for `Analog Devices ADT7408'... No
Probing for `IDT TS3000/TSE2002'... No
Probing for `Maxim MAX6604'... No
Probing for `Microchip MCP9804'... No
Probing for `Microchip MCP98242'... No
Probing for `Microchip MCP98243'... No
Probing for `Microchip MCP98244'... No
Probing for `Microchip MCP9843'... No
Probing for `ON CAT6095/CAT34TS02'... No
Probing for `Atmel AT30TS00'... No
Client found at address 0x1f
Probing for `Texas Instruments TMP421'... No
Probing for `ST STTS424'... No
Probing for `ST STTS424E'... No
Probing for `ST STTS2002'... No
Probing for `ST STTS3000'... No
Probing for `NXP SE97/SE97B'... No
Probing for `NXP SE98'... No
Probing for `Analog Devices ADT7408'... No
Probing for `IDT TS3000/TSE2002'... No
Probing for `Maxim MAX6604'... No
Probing for `Microchip MCP9804'... No
Probing for `Microchip MCP98242'... No
Probing for `Microchip MCP98243'... No
Probing for `Microchip MCP98244'... No
Probing for `Microchip MCP9843'... No
Probing for `ON CAT6095/CAT34TS02'... No
Probing for `Atmel AT30TS00'... No
Client found at address 0x28
Probing for `National Semiconductor LM78'... No
Probing for `National Semiconductor LM79'... No
Probing for `National Semiconductor LM80'... No
Probing for `National Semiconductor LM96080'... No
Probing for `Winbond W83781D'... No
Probing for `Winbond W83782D'... No
Probing for `Winbond W83627HF'... No
Probing for `Winbond W83627EHF'... No
Probing for `Winbond W83627DHG/W83667HG/W83677HG'... No
Probing for `Asus AS99127F (rev.1)'... No
Probing for `Asus AS99127F (rev.2)'... No
Probing for `Asus ASB100 Bach'... No
Probing for `Analog Devices ADM1029'... No
Probing for `ITE IT8712F'... No
Client found at address 0x29
Probing for `National Semiconductor LM78'... No
Probing for `National Semiconductor LM79'... No
Probing for `National Semiconductor LM80'... No
Probing for `National Semiconductor LM96080'... No
Probing for `Winbond W83781D'... No
Probing for `Winbond W83782D'... No
Probing for `Winbond W83627HF'... No
Probing for `Winbond W83627EHF'... No
Probing for `Winbond W83627DHG/W83667HG/W83677HG'... No
Probing for `Asus AS99127F (rev.1)'... No
Probing for `Asus AS99127F (rev.2)'... No
Probing for `Asus ASB100 Bach'... No
Probing for `Analog Devices ADM1021'... No
Probing for `Analog Devices ADM1021A/ADM1023'... No
Probing for `Maxim MAX1617'... No
Probing for `Maxim MAX1617A'... No
Probing for `Maxim MAX1668'... No
Probing for `Maxim MAX1805'... No
Probing for `Maxim MAX1989'... No
Probing for `Maxim MAX6655/MAX6656'... No
Probing for `TI THMC10'... No
Probing for `National Semiconductor LM84'... No
Probing for `Genesys Logic GL523SM'... No
Probing for `Onsemi MC1066'... No
Probing for `Maxim MAX1618'... No
Probing for `Maxim MAX1619'... No
Probing for `National Semiconductor LM82/LM83'... No
Probing for `Maxim MAX6654'... No
Probing for `Maxim MAX6690'... No
Probing for `Maxim MAX6680/MAX6681'... No
Probing for `Maxim MAX6695/MAX6696'... No
Probing for `National Semiconductor LM95245'... No
Probing for `Analog Devices ADM1029'... No
Probing for `ITE IT8712F'... No
Probing for `SMSC EMC1402'... No
Probing for `SMSC EMC1403'... No
Probing for `SMSC EMC1404'... No
Client found at address 0x2a
Probing for `National Semiconductor LM78'... No
Probing for `National Semiconductor LM79'... No
Probing for `National Semiconductor LM80'... No
Probing for `National Semiconductor LM96080'... No
Probing for `Winbond W83781D'... No
Probing for `Winbond W83782D'... No
Probing for `Winbond W83627HF'... No
Probing for `Winbond W83627EHF'... No
Probing for `Winbond W83627DHG/W83667HG/W83677HG'... No
Probing for `Asus AS99127F (rev.1)'... No
Probing for `Asus AS99127F (rev.2)'... No
Probing for `Asus ASB100 Bach'... No
Probing for `Analog Devices ADM1021'... No
Probing for `Analog Devices ADM1021A/ADM1023'... No
Probing for `Maxim MAX1617'... No
Probing for `Maxim MAX1617A'... No
Probing for `Maxim MAX1668'... No
Probing for `Maxim MAX1805'... No
Probing for `Maxim MAX1989'... No
Probing for `Maxim MAX6655/MAX6656'... No
Probing for `TI THMC10'... No
Probing for `National Semiconductor LM84'... No
Probing for `Genesys Logic GL523SM'... No
Probing for `Onsemi MC1066'... No
Probing for `Maxim MAX1618'... No
Probing for `Maxim MAX1619'... No
Probing for `National Semiconductor LM82/LM83'... No
Probing for `Maxim MAX6654'... No
Probing for `Maxim MAX6690'... No
Probing for `Maxim MAX6680/MAX6681'... No
Probing for `Maxim MAX6695/MAX6696'... No
Probing for `Texas Instruments TMP421'... No
Probing for `National Semiconductor LM95231'... No
Probing for `National Semiconductor LM95241'... No
Probing for `Analog Devices ADM1029'... No
Probing for `ITE IT8712F'... No
Client found at address 0x2b
Probing for `National Semiconductor LM78'... No
Probing for `National Semiconductor LM79'... No
Probing for `National Semiconductor LM80'... No
Probing for `National Semiconductor LM96080'... No
Probing for `Winbond W83781D'... No
Probing for `Winbond W83782D'... No
Probing for `Winbond W83627HF'... No
Probing for `Winbond W83627EHF'... No
Probing for `Winbond W83627DHG/W83667HG/W83677HG'... No
Probing for `Asus AS99127F (rev.1)'... No
Probing for `Asus AS99127F (rev.2)'... No
Probing for `Asus ASB100 Bach'... No
Probing for `Analog Devices ADM1021'... No
Probing for `Analog Devices ADM1021A/ADM1023'... No
Probing for `Maxim MAX1617'... No
Probing for `Maxim MAX1617A'... No
Probing for `Maxim MAX1668'... No
Probing for `Maxim MAX1805'... No
Probing for `Maxim MAX1989'... No
Probing for `Maxim MAX6655/MAX6656'... No
Probing for `TI THMC10'... No
Probing for `National Semiconductor LM84'... No
Probing for `Genesys Logic GL523SM'... No
Probing for `Onsemi MC1066'... No
Probing for `Maxim MAX1618'... No
Probing for `Maxim MAX1619'... No
Probing for `National Semiconductor LM82/LM83'... No
Probing for `Maxim MAX6654'... No
Probing for `Maxim MAX6690'... No
Probing for `Maxim MAX6680/MAX6681'... No
Probing for `Maxim MAX6695/MAX6696'... No
Probing for `National Semiconductor LM95231'... No
Probing for `National Semiconductor LM95241'... No
Probing for `Analog Devices ADM1029'... No
Probing for `ITE IT8712F'... No
Client found at address 0x2c
Probing for `Myson MTP008'... No
Probing for `National Semiconductor LM78'... No
Probing for `National Semiconductor LM79'... No
Probing for `National Semiconductor LM80'... No
Probing for `National Semiconductor LM96080'... No
Probing for `National Semiconductor LM85'... No
Probing for `National Semiconductor LM96000 or PC8374L'... No
Probing for `Analog Devices ADM1027'... No
Probing for `Analog Devices ADT7460 or ADT7463'... No
Probing for `SMSC EMC6D100 or EMC6D101'... No
Probing for `SMSC EMC6D102'... No
Probing for `SMSC EMC6D103'... No
Probing for `SMSC EMC6D103S or EMC2300'... No
Probing for `SMSC EMC6W201'... No
Probing for `Winbond WPCD377I'... No
Probing for `Analog Devices ADT7470'... No
Probing for `Analog Devices ADT7473'... No
Probing for `Analog Devices ADT7476'... No
Probing for `Analog Devices ADT7490'... No
Probing for `Andigilog aSC7611'... No
Probing for `Andigilog aSC7621'... No
Probing for `National Semiconductor LM87'... No
Probing for `Analog Devices ADM1024'... No
Probing for `National Semiconductor LM93'... No
Probing for `National Semiconductor LM94 or LM96194'... No
Probing for `Winbond W83781D'... No
Probing for `Winbond W83782D'... No
Probing for `Winbond W83791D'... No
Probing for `Winbond W83792D'... No
Probing for `Winbond W83793R/G'... No
Probing for `Nuvoton W83795G/ADG'... No
Probing for `Winbond W83627HF'... No
Probing for `Winbond W83627EHF'... No
Probing for `Winbond W83627DHG/W83667HG/W83677HG'... No
Probing for `Asus AS99127F (rev.1)'... No
Probing for `Asus AS99127F (rev.2)'... No
Probing for `Asus ASB100 Bach'... No
Probing for `Genesys Logic GL518SM'... No
Probing for `Genesys Logic GL520SM'... No
Probing for `Analog Devices ADM9240'... No
Probing for `Dallas Semiconductor DS1780'... No
Probing for `National Semiconductor LM81'... No
Probing for `Analog Devices ADM1026'... No
Probing for `Analog Devices ADM1025'... No
Probing for `Philips NE1619'... No
Probing for `Maxim MAX6639'... No
Probing for `Texas Instruments AMC6821'... No
Probing for `Analog Devices ADM1029'... No
Probing for `Analog Devices ADM1030'... No
Probing for `Analog Devices ADM1031'... No
Probing for `Analog Devices ADM1022'... No
Probing for `Texas Instruments THMC50'... No
Probing for `ITE IT8712F'... No
Probing for `ALi M5879'... No
Probing for `SMSC LPC47M15x/192/292/997'... No
Probing for `SMSC DME1737'... No
Probing for `SMSC SCH5027D-NW'... No
Probing for `Winbond W83791SD'... No
Client found at address 0x2d
Probing for `Myson MTP008'... No
Probing for `National Semiconductor LM78'... No
Probing for `National Semiconductor LM79'... No
Probing for `National Semiconductor LM80'... No
Probing for `National Semiconductor LM96080'... No
Probing for `National Semiconductor LM85'... No
Probing for `National Semiconductor LM96000 or PC8374L'... No
Probing for `Analog Devices ADM1027'... No
Probing for `Analog Devices ADT7460 or ADT7463'... No
Probing for `SMSC EMC6D100 or EMC6D101'... No
Probing for `SMSC EMC6D102'... No
Probing for `SMSC EMC6D103'... No
Probing for `SMSC EMC6D103S or EMC2300'... No
Probing for `SMSC EMC6W201'... No
Probing for `Winbond WPCD377I'... No
Probing for `Analog Devices ADT7473'... No
Probing for `Analog Devices ADT7476'... No
Probing for `Analog Devices ADT7490'... No
Probing for `Andigilog aSC7611'... No
Probing for `Andigilog aSC7621'... No
Probing for `National Semiconductor LM87'... No
Probing for `Analog Devices ADM1024'... No
Probing for `National Semiconductor LM93'... No
Probing for `National Semiconductor LM94 or LM96194'... No
Probing for `Winbond W83781D'... No
Probing for `Winbond W83782D'... No
Probing for `Winbond W83783S'... No
Probing for `Winbond W83791D'... No
Probing for `Winbond W83792D'... No
Probing for `Winbond W83793R/G'... No
Probing for `Nuvoton W83795G/ADG'... No
Probing for `Winbond W83627HF'... No
Probing for `Winbond W83627EHF'... No
Probing for `Winbond W83627DHG/W83667HG/W83677HG'... No
Probing for `Asus AS99127F (rev.1)'... No
Probing for `Asus AS99127F (rev.2)'... No
Probing for `Asus ASB100 Bach'... No
Probing for `Winbond W83L784R/AR/G'... No
Probing for `Winbond W83L785R/G'... No
Probing for `Genesys Logic GL518SM'... No
Probing for `Genesys Logic GL520SM'... No
Probing for `Genesys Logic GL525SM'... No
Probing for `Analog Devices ADM9240'... No
Probing for `Dallas Semiconductor DS1780'... No
Probing for `National Semiconductor LM81'... No
Probing for `Analog Devices ADM1026'... No
Probing for `Analog Devices ADM1025'... No
Probing for `Philips NE1619'... No
Probing for `Texas Instruments AMC6821'... No
Probing for `Analog Devices ADM1029'... No
Probing for `Analog Devices ADM1030'... No
Probing for `Analog Devices ADM1031'... No
Probing for `Analog Devices ADM1022'... No
Probing for `Texas Instruments THMC50'... No
Probing for `VIA VT1211 (I2C)'... No
Probing for `ITE IT8712F'... No
Probing for `ALi M5879'... No
Probing for `SMSC LPC47M15x/192/292/997'... No
Probing for `SMSC DME1737'... No
Probing for `SMSC SCH5027D-NW'... No
Probing for `Fintek F75373S/SG'... No
Probing for `Fintek F75375S/SP'... No
Probing for `Fintek F75387SG/RG'... No
Probing for `Winbond W83791SD'... No
Client found at address 0x2e
Probing for `Myson MTP008'... No
Probing for `National Semiconductor LM78'... No
Probing for `National Semiconductor LM79'... No
Probing for `National Semiconductor LM80'... No
Probing for `National Semiconductor LM96080'... No
Probing for `National Semiconductor LM85'... No
Probing for `National Semiconductor LM96000 or PC8374L'... No
Probing for `Analog Devices ADM1027'... No
Probing for `Analog Devices ADT7460 or ADT7463'... No
Probing for `SMSC EMC6D100 or EMC6D101'... No
Probing for `SMSC EMC6D102'... No
Probing for `SMSC EMC6D103'... No
Probing for `SMSC EMC6D103S or EMC2300'... No
Probing for `SMSC EMC6W201'... No
Probing for `Winbond WPCD377I'... No
Probing for `Analog Devices ADT7467 or ADT7468'... No
Probing for `Analog Devices ADT7470'... No
Probing for `Analog Devices ADT7473'... No
Probing for `Analog Devices ADT7475'... No
Probing for `Analog Devices ADT7476'... No
Probing for `Analog Devices ADT7490'... No
Probing for `Andigilog aSC7611'... No
Probing for `Andigilog aSC7621'... No
Probing for `National Semiconductor LM87'... No
Probing for `Analog Devices ADM1024'... No
Probing for `National Semiconductor LM93'... No
Probing for `National Semiconductor LM94 or LM96194'... No
Probing for `Winbond W83781D'... No
Probing for `Winbond W83782D'... No
Probing for `Winbond W83791D'... No
Probing for `Winbond W83792D'... No
Probing for `Winbond W83793R/G'... No
Probing for `Nuvoton W83795G/ADG'... No
Probing for `Winbond W83627HF'... No
Probing for `Winbond W83627EHF'... No
Probing for `Winbond W83627DHG/W83667HG/W83677HG'... No
Probing for `Asus AS99127F (rev.1)'... No
Probing for `Asus AS99127F (rev.2)'... No
Probing for `Asus ASB100 Bach'... No
Probing for `Winbond W83L786NR/NG/R/G'... No
Probing for `Winbond W83L785TS-S'... No
Probing for `Analog Devices ADM9240'... No
Probing for `Dallas Semiconductor DS1780'... No
Probing for `National Semiconductor LM81'... No
Probing for `Analog Devices ADM1026'... No
Probing for `Analog Devices ADM1025'... No
Probing for `Maxim MAX6639'... No
Probing for `Texas Instruments AMC6821'... No
Probing for `Analog Devices ADM1029'... No
Probing for `Analog Devices ADM1030'... No
Probing for `Analog Devices ADM1031'... No
Probing for `Analog Devices ADM1022'... No
Probing for `Texas Instruments THMC50'... No
Probing for `Analog Devices ADM1028'... No
Probing for `Texas Instruments THMC51'... No
Probing for `ITE IT8712F'... No
Probing for `SMSC DME1737'... No
Probing for `SMSC SCH5027D-NW'... No
Probing for `SMSC EMC2103'... No
Probing for `Fintek F75373S/SG'... No
Probing for `Fintek F75375S/SP'... No
Probing for `Fintek F75387SG/RG'... No
Probing for `Winbond W83791SD'... No
Client found at address 0x2f
Probing for `National Semiconductor LM78'... No
Probing for `National Semiconductor LM79'... No
Probing for `National Semiconductor LM80'... No
Probing for `National Semiconductor LM96080'... No
Probing for `Analog Devices ADT7470'... No
Probing for `Winbond W83781D'... No
Probing for `Winbond W83782D'... No
Probing for `Winbond W83791D'... No
Probing for `Winbond W83792D'... No
Probing for `Winbond W83793R/G'... No
Probing for `Nuvoton W83795G/ADG'... No
Probing for `Winbond W83627HF'... No
Probing for `Winbond W83627EHF'... No
Probing for `Winbond W83627DHG/W83667HG/W83677HG'... No
Probing for `Asus AS99127F (rev.1)'... No
Probing for `Asus AS99127F (rev.2)'... No
Probing for `Asus ASB100 Bach'... No
Probing for `Winbond W83L786NR/NG/R/G'... No
Probing for `Analog Devices ADM9240'... No
Probing for `Dallas Semiconductor DS1780'... No
Probing for `National Semiconductor LM81'... No
Probing for `Maxim MAX6639'... No
Probing for `Analog Devices ADM1029'... No
Probing for `ITE IT8712F'... No
Probing for `Fintek custom power control IC'... No
Probing for `Winbond W83791SD'... No
Client found at address 0x48
Probing for `National Semiconductor LM75'... No
Probing for `National Semiconductor LM75A'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `National Semiconductor LM77'... No
Probing for `Analog Devices ADT7410/ADT7420'... No
Probing for `Analog Devices ADT7411'... No
Probing for `Maxim MAX6642'... No
Probing for `National Semiconductor LM73'... No
Probing for `National Semiconductor LM92'... No
Probing for `National Semiconductor LM76'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Probing for `NXP/Philips SA56004'... No
Probing for `SMSC EMC1023'... No
Probing for `SMSC EMC1043'... No
Probing for `SMSC EMC1053'... No
Probing for `SMSC EMC1063'... No
Client found at address 0x49
Probing for `National Semiconductor LM75'... No
Probing for `National Semiconductor LM75A'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `National Semiconductor LM77'... No
Probing for `Analog Devices ADT7410/ADT7420'... No
Probing for `Maxim MAX6642'... No
Probing for `National Semiconductor LM73'... No
Probing for `National Semiconductor LM92'... No
Probing for `National Semiconductor LM76'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Probing for `NXP/Philips SA56004'... No
Probing for `SMSC EMC1023'... No
Probing for `SMSC EMC1043'... No
Probing for `SMSC EMC1053'... No
Probing for `SMSC EMC1063'... No
Client found at address 0x4a
Probing for `National Semiconductor LM75'... No
Probing for `National Semiconductor LM75A'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `National Semiconductor LM77'... No
Probing for `Analog Devices ADT7410/ADT7420'... No
Probing for `Analog Devices ADT7411'... No
Probing for `Maxim MAX6642'... No
Probing for `National Semiconductor LM73'... No
Probing for `National Semiconductor LM92'... No
Probing for `National Semiconductor LM76'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Probing for `NXP/Philips SA56004'... No
Client found at address 0x4b
Probing for `National Semiconductor LM75'... No
Probing for `National Semiconductor LM75A'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `National Semiconductor LM77'... No
Probing for `Analog Devices ADT7410/ADT7420'... No
Probing for `Analog Devices ADT7411'... No
Probing for `Maxim MAX6642'... No
Probing for `National Semiconductor LM92'... No
Probing for `National Semiconductor LM76'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Probing for `NXP/Philips SA56004'... No
Probing for `Analog Devices ADT7481'... No
Client found at address 0x4c
Probing for `National Semiconductor LM75'... No
Probing for `National Semiconductor LM75A'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `Analog Devices ADT7466'... No
Probing for `Andigilog aSC7511'... No
Probing for `Analog Devices ADM1021'... No
Probing for `Analog Devices ADM1021A/ADM1023'... No
Probing for `Global Mixed-mode Technology G781'... No
Probing for `Maxim MAX1617'... No
Probing for `Maxim MAX1617A'... No
Probing for `Maxim MAX1668'... No
Probing for `Maxim MAX1805'... No
Probing for `Maxim MAX1989'... No
Probing for `Maxim MAX6642'... No
Probing for `Maxim MAX6655/MAX6656'... No
Probing for `TI THMC10'... No
Probing for `National Semiconductor LM84'... No
Probing for `Genesys Logic GL523SM'... No
Probing for `Onsemi MC1066'... No
Probing for `Maxim MAX1618'... No
Probing for `Maxim MAX1619'... No
Probing for `National Semiconductor LM82/LM83'... No
Probing for `National Semiconductor LM90'... No
Probing for `National Semiconductor LM89/LM99'... No
Probing for `National Semiconductor LM86'... No
Probing for `Analog Devices ADM1032'... No
Probing for `Maxim MAX6654'... No
Probing for `Maxim MAX6690'... No
Probing for `Maxim MAX6657/MAX6658/MAX6659'... No
Probing for `Maxim MAX6648/MAX6649/MAX6692'... No
Probing for `Maxim MAX6680/MAX6681'... No
Probing for `Maxim MAX6695/MAX6696'... No
Probing for `Winbond W83L771W/G'... No
Probing for `Winbond W83L771AWG/ASG'... No
Probing for `Texas Instruments TMP401'... No
Probing for `Texas Instruments TMP411'... No
Probing for `Texas Instruments TMP421'... No
Probing for `Texas Instruments TMP422'... No
Probing for `Texas Instruments TMP423'... No
Probing for `Texas Instruments TMP431'... No
Probing for `Texas Instruments TMP432'... No
Probing for `Texas Instruments AMC6821'... No
Probing for `National Semiconductor LM95245'... No
Probing for `National Semiconductor LM63'... No
Probing for `National Semiconductor LM96163'... No
Probing for `Fintek F75363SG'... No
Probing for `National Semiconductor LM73'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Probing for `Analog Devices ADT7461'... No
Probing for `Analog Devices ADT7461A, ON Semiconductor NCT1008'... No
Probing for `NXP/Philips SA56004'... No
Probing for `Analog Devices ADT7481'... No
Probing for `Fintek F75383S/M'... No
Probing for `SMSC EMC1002'... No
Probing for `SMSC EMC1023'... No
Probing for `SMSC EMC1033'... No
Probing for `SMSC EMC1043'... No
Probing for `SMSC EMC1046'... No
Probing for `SMSC EMC1053'... No
Probing for `SMSC EMC1063'... No
Probing for `SMSC EMC1072'... No
Probing for `SMSC EMC1073'... No
Probing for `SMSC EMC1074'... No
Probing for `SMSC EMC1402'... No
Probing for `SMSC EMC1403'... No
Probing for `SMSC EMC1404'... No
Probing for `SMSC EMC1423'... No
Probing for `SMSC EMC1424'... No
Client found at address 0x4d
Probing for `National Semiconductor LM75'... No
Probing for `National Semiconductor LM75A'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `Analog Devices ADM1021'... No
Probing for `Analog Devices ADM1021A/ADM1023'... No
Probing for `Global Mixed-mode Technology G781'... No
Probing for `Maxim MAX1617'... No
Probing for `Maxim MAX1617A'... No
Probing for `Maxim MAX1668'... No
Probing for `Maxim MAX1805'... No
Probing for `Maxim MAX1989'... No
Probing for `Maxim MAX6642'... No
Probing for `Maxim MAX6655/MAX6656'... No
Probing for `TI THMC10'... No
Probing for `National Semiconductor LM84'... No
Probing for `Genesys Logic GL523SM'... No
Probing for `Onsemi MC1066'... No
Probing for `Maxim MAX1618'... No
Probing for `Maxim MAX1619'... No
Probing for `National Semiconductor LM82/LM83'... No
Probing for `National Semiconductor LM89/LM99'... No
Probing for `Analog Devices ADM1032'... No
Probing for `Maxim MAX6654'... No
Probing for `Maxim MAX6690'... No
Probing for `Maxim MAX6659'... No
Probing for `Maxim MAX6646'... No
Probing for `Maxim MAX6680/MAX6681'... No
Probing for `Maxim MAX6695/MAX6696'... No
Probing for `Texas Instruments TMP411'... No
Probing for `Texas Instruments TMP421'... No
Probing for `Texas Instruments TMP422'... No
Probing for `Texas Instruments TMP423'... No
Probing for `Texas Instruments TMP431'... No
Probing for `Texas Instruments TMP432'... No
Probing for `Texas Instruments AMC6821'... No
Probing for `National Semiconductor LM95234'... No
Probing for `National Semiconductor LM95245'... No
Probing for `National Semiconductor LM73'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Probing for `Analog Devices ADT7461'... No
Probing for `Analog Devices ADT7461A, ON Semiconductor NCT1008'... No
Probing for `NXP/Philips SA56004'... No
Probing for `Fintek F75384S/M'... No
Probing for `SMSC EMC1002'... No
Probing for `SMSC EMC1023'... No
Probing for `SMSC EMC1033'... No
Probing for `SMSC EMC1043'... No
Probing for `SMSC EMC1046'... No
Probing for `SMSC EMC1053'... No
Probing for `SMSC EMC1063'... No
Probing for `SMSC EMC1402'... No
Probing for `SMSC EMC1403'... No
Probing for `SMSC EMC1404'... No
Client found at address 0x4e
Probing for `National Semiconductor LM75'... No
Probing for `National Semiconductor LM75A'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `Analog Devices ADM1021'... No
Probing for `Analog Devices ADM1021A/ADM1023'... No
Probing for `Maxim MAX1617'... No
Probing for `Maxim MAX1617A'... No
Probing for `Maxim MAX1668'... No
Probing for `Maxim MAX1805'... No
Probing for `Maxim MAX1989'... No
Probing for `Maxim MAX6642'... No
Probing for `Maxim MAX6655/MAX6656'... No
Probing for `TI THMC10'... No
Probing for `National Semiconductor LM84'... No
Probing for `Genesys Logic GL523SM'... No
Probing for `Onsemi MC1066'... No
Probing for `Maxim MAX1618'... No
Probing for `Maxim MAX1619'... No
Probing for `National Semiconductor LM82/LM83'... No
Probing for `Maxim MAX6654'... No
Probing for `Maxim MAX6690'... No
Probing for `Maxim MAX6659'... No
Probing for `Maxim MAX6647'... No
Probing for `Maxim MAX6680/MAX6681'... No
Probing for `Maxim MAX6695/MAX6696'... No
Probing for `Texas Instruments TMP411'... No
Probing for `Texas Instruments TMP421'... No
Probing for `Texas Instruments TMP422'... No
Probing for `Texas Instruments AMC6821'... No
Probing for `National Semiconductor LM95234'... No
Probing for `National Semiconductor LM64'... No
Probing for `National Semiconductor LM73'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Probing for `NXP/Philips SA56004'... No
Probing for `Fintek F75121R/F75122R/RG (VID+GPIO)'... No
Probing for `Fintek F75111R/RG/N (GPIO)'... No
Probing for `ITE IT8201R/IT8203R/IT8206R/IT8266R'... No
Client found at address 0x4f
Probing for `National Semiconductor LM75'... No
Probing for `National Semiconductor LM75A'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `Maxim MAX6642'... No
Probing for `Texas Instruments TMP421'... No
Probing for `Texas Instruments TMP422'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Probing for `NXP/Philips SA56004'... No
Client found at address 0x50
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Probing for `EDID EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Client found at address 0x51
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Client found at address 0x52
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Client found at address 0x53
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Client found at address 0x58
Probing for `Analog Devices ADT7462'... No
Probing for `Andigilog aSC7512'... No
Client found at address 0x5c
Probing for `Analog Devices ADT7462'... No
Probing for `SMSC EMC1072'... No
Probing for `SMSC EMC1073'... No
Probing for `SMSC EMC1074'... No
Client found at address 0x73
Probing for `FSC Poseidon I'... No
Probing for `FSC Poseidon II'... No
Probing for `FSC Scylla'... No
Probing for `FSC Hermes'... No
Probing for `FSC Heimdal'... No
Probing for `FSC Heracles'... No
Probing for `FSC Hades'... No
Probing for `FSC Syleus'... No
Client found at address 0x77
Probing for `Asus Mozart-2'... No
Next adapter: DPDDC-C (i2c-7)
Do you want to scan it? (YES/no/selectively): y
Next adapter: DPDDC-D (i2c-8)
Do you want to scan it? (YES/no/selectively): y
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `coretemp':
* Chip `Intel digital thermal sensor' (confidence: 9)
Do you want to overwrite /etc/sysconfig/lm_sensors? (YES/no): y
Copy prog/init/lm_sensors.init to /etc/init.d/lm_sensors
for initialization at boot time.
You should now start the lm_sensors service to load the required
kernel modules.
Unloading i2c-dev... OK
Unloading i2c-i801... OK
Unloading cpuid... OK
=======================================
# pwmconfig revision 6166 (2013-05-01)
This program will search your sensors for pulse width modulation (pwm)
controls, and test each one to see if it controls a fan on
your motherboard. Note that many motherboards do not have pwm
circuitry installed, even if your sensor chip supports pwm.
We will attempt to briefly stop each fan using the pwm controls.
The program will attempt to restore each fan to full speed
after testing. However, it is ** very important ** that you
physically verify that the fans have been to full speed
after the program has completed.
/usr/local/sbin/pwmconfig: There are no pwm-capable sensor modules installed
[-- Attachment #3: Type: text/plain, Size: 153 bytes --]
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
2013-11-11 14:28 ` Guenter Roeck
2013-11-11 17:04 ` p. stephen w
@ 2013-11-11 17:38 ` Guenter Roeck
2013-11-11 18:17 ` p. stephen w
` (41 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: Guenter Roeck @ 2013-11-11 17:38 UTC (permalink / raw)
To: lm-sensors
On Mon, Nov 11, 2013 at 09:04:13AM -0800, p. stephen w wrote:
> Please see attached.
> ______________________________________
> If I had to guess, I may be installing the GitHub driver incorrectly.
> Here's what I do....
>
> I clone the repo into my home dir, and run 'make -B', or 'make all'. The
> output is...
> Building modules, stage 2.
> MODPOST 1 modules
>
Did you run "sudo make install" ?
> Looking in the /kernel/drivers/hwmon/, I do not see the nct6791d.ko file,
> which I expected. I do have 'nct_thermistor.ko'. The led me to suspect
You would only see nct6775.ko, unless you are not using my driver from github.
In that case, can you point me to the driver on github you are using ?
> something went wrong with the install.
>
> Running sensors-detect only finds the Intel CPU sensors.
>
Old version, most likely.
> Running pwmconfig does not detect any sensors. There are two PWM devices;
> 1 fan and 1 pump on the CPU header. These work fine under Windows 7 and
> the Asus AI 3 utility.
>
>
> I've also manually installed the latest lm-sensors, again by downloading
> into my home dir, and running the make commands; make user, and make_detect
> (i think). Attached is the output from running sensors-detect.
>
Just run sensors_detect from prog/detect/. I am not sure if you actually
installed it. If not, you just keep running the installed version.
Thanks,
Guenter
> Uname -a:
> Linux Mint 3.8.0-19-generic #29-Ubuntu SMP Wed Apr 17 18:16:28 UTC 2013
> x86_64 x86_64 x86_64 GNU/Linux
>
>
>
> Hopefully this helps. Let me know if you need more info.
>
>
>
> On Mon, Nov 11, 2013 at 6:28 AM, Guenter Roeck <linux@roeck-us.net> wrote:
>
> > On 11/10/2013 09:25 PM, p. stephen w wrote:
> >
> >> Hey guys,
> >> I'd be happy to contribute $50 to get this chip supported via
> >> sensors-detect. The weekends over, and I have not been able to get it
> >> installed as a stand alone driver from the GitHub repo. I have some
> >> Apache
> >> experience, but am clueless about Linux; I'm running the latest Mint
> >> distro. I'm sure there's a way, but I don't know it.
> >>
> >>
> > Hi Stephen,
> >
> > Can you provide details ? Both sensors-detect and the upstream kernel
> > (3.12)
> > support the chip, and the nct6775 driver on github should work as well.
> > If it doesn't, it might be useful to tell us what exactly doesn't work for
> > you.
> >
> > Thanks,
> > Guenter
> >
> >
>
>
> --
>
>
> _____________________________
> Stephen Wille | pstephenwille.com
> *new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
> acpitz-virtual-0
> Adapter: Virtual device
> temp1: +27.8°C (crit = +105.0°C)
> temp2: +29.8°C (crit = +105.0°C)
>
> coretemp-isa-0000
> Adapter: ISA adapter
> Physical id 0: +33.0°C (high = +80.0°C, crit = +100.0°C)
> Core 0: +31.0°C (high = +80.0°C, crit = +100.0°C)
> Core 1: +30.0°C (high = +80.0°C, crit = +100.0°C)
> Core 2: +32.0°C (high = +80.0°C, crit = +100.0°C)
> Core 3: +30.0°C (high = +80.0°C, crit = +100.0°C)
>
>
> ===========================
> # sensors-detect revision 6170 (2013-05-20 21:25:22 +0200)
> # System: ASUS All Series
> # Board: ASUSTeK COMPUTER INC. Z87I-DELUXE
>
> This program will help you determine which kernel modules you need
> to load to use lm_sensors most effectively. It is generally safe
> and recommended to accept the default answers to all questions,
> unless you know what you're doing.
>
> Some south bridges, CPUs or memory controllers contain embedded sensors.
> Do you want to scan for them? This is totally safe. (YES/no): y
> Silicon Integrated Systems SIS5595... No
> VIA VT82C686 Integrated Sensors... No
> VIA VT8231 Integrated Sensors... No
> AMD K8 thermal sensors... No
> AMD Family 10h thermal sensors... No
> AMD Family 11h thermal sensors... No
> AMD Family 12h and 14h thermal sensors... No
> AMD Family 15h thermal sensors... No
> AMD Family 15h power sensors... No
> AMD Family 16h power sensors... No
> Intel digital thermal sensor... Success!
> (driver `coretemp')
> Intel AMB FB-DIMM thermal sensor... No
> VIA C7 thermal sensor... No
> VIA Nano thermal sensor... No
>
> Some Super I/O chips contain embedded sensors. We have to write to
> standard I/O ports to probe them. This is usually safe.
> Do you want to scan for Super I/O sensors? (YES/no): y
> Probing for Super-I/O at 0x2e/0x2f
> Trying family `National Semiconductor/ITE'... No
> Trying family `SMSC'... No
> Trying family `VIA/Winbond/Nuvoton/Fintek'... Yes
> Found unknown chip with ID 0xc803
> (logical device B has address 0x290, could be sensors)
> Probing for Super-I/O at 0x4e/0x4f
> Trying family `National Semiconductor/ITE'... No
> Trying family `SMSC'... No
> Trying family `VIA/Winbond/Nuvoton/Fintek'... No
> Trying family `ITE'... No
>
> Some systems (mainly servers) implement IPMI, a set of common interfaces
> through which system health data may be retrieved, amongst other things.
> We first try to get the information from SMBIOS. If we don't find it
> there, we have to read from arbitrary I/O ports to probe for such
> interfaces. This is normally safe. Do you want to scan for IPMI
> interfaces? (YES/no): y
> Probing for `IPMI BMC KCS' at 0xca0... No
> Probing for `IPMI BMC SMIC' at 0xca8... No
>
>
>
> Some hardware monitoring chips are accessible through the ISA I/O ports.
> We have to write to arbitrary I/O ports to probe them. This is usually
> safe though. Yes, you do have ISA I/O ports even if you do not have any
> ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y
> Probing for `National Semiconductor LM78' at 0x290... No
> Probing for `National Semiconductor LM79' at 0x290... No
> Probing for `Winbond W83781D' at 0x290... No
> Probing for `Winbond W83782D' at 0x290... No
>
> Lastly, we can probe the I2C/SMBus adapters for connected hardware
> monitoring devices. This is the most risky part, and while it works
> reasonably well on most systems, it has been reported to cause trouble
> on some systems.
> Do you want to probe the I2C/SMBus adapters now? (YES/no): y
> Using driver `i2c-i801' for device 0000:00:1f.3: Intel Lynx Point (PCH)
>
> Next adapter: i915 gmbus ssc (i2c-0)
> Do you want to scan it? (yes/NO/selectively): y
>
> Next adapter: i915 gmbus vga (i2c-1)
> Do you want to scan it? (yes/NO/selectively): y
>
> Next adapter: i915 gmbus panel (i2c-2)
> Do you want to scan it? (yes/NO/selectively): y
>
> Next adapter: i915 gmbus dpc (i2c-3)
> Do you want to scan it? (yes/NO/selectively): y
>
> Next adapter: i915 gmbus dpb (i2c-4)
> Do you want to scan it? (yes/NO/selectively): y
>
> Next adapter: i915 gmbus dpd (i2c-5)
> Do you want to scan it? (yes/NO/selectively): y
>
> Next adapter: DPDDC-B (i2c-6)
> Do you want to scan it? (YES/no/selectively): y
> Client found at address 0x18
> Probing for `Analog Devices ADM1021'... No
> Probing for `Analog Devices ADM1021A/ADM1023'... No
> Probing for `Maxim MAX1617'... No
> Probing for `Maxim MAX1617A'... No
> Probing for `Maxim MAX1668'... No
> Probing for `Maxim MAX1805'... No
> Probing for `Maxim MAX1989'... No
> Probing for `Maxim MAX6655/MAX6656'... No
> Probing for `TI THMC10'... No
> Probing for `National Semiconductor LM84'... No
> Probing for `Genesys Logic GL523SM'... No
> Probing for `Onsemi MC1066'... No
> Probing for `Maxim MAX1618'... No
> Probing for `Maxim MAX1619'... No
> Probing for `National Semiconductor LM82/LM83'... No
> Probing for `Maxim MAX6654'... No
> Probing for `Maxim MAX6690'... No
> Probing for `Maxim MAX6680/MAX6681'... No
> Probing for `Maxim MAX6695/MAX6696'... No
> Probing for `Texas Instruments AMC6821'... No
> Probing for `National Semiconductor LM95234'... No
> Probing for `National Semiconductor LM95245'... No
> Probing for `National Semiconductor LM64'... No
> Probing for `SMSC EMC1047'... No
> Probing for `SMSC EMC1402'... No
> Probing for `SMSC EMC1403'... No
> Probing for `SMSC EMC1404'... No
> Probing for `ST STTS424'... No
> Probing for `ST STTS424E'... No
> Probing for `ST STTS2002'... No
> Probing for `ST STTS3000'... No
> Probing for `NXP SE97/SE97B'... No
> Probing for `NXP SE98'... No
> Probing for `Analog Devices ADT7408'... No
> Probing for `IDT TS3000/TSE2002'... No
> Probing for `Maxim MAX6604'... No
> Probing for `Microchip MCP9804'... No
> Probing for `Microchip MCP98242'... No
> Probing for `Microchip MCP98243'... No
> Probing for `Microchip MCP98244'... No
> Probing for `Microchip MCP9843'... No
> Probing for `ON CAT6095/CAT34TS02'... No
> Probing for `Atmel AT30TS00'... No
> Client found at address 0x19
> Probing for `Analog Devices ADM1021'... No
> Probing for `Analog Devices ADM1021A/ADM1023'... No
> Probing for `Maxim MAX1617'... No
> Probing for `Maxim MAX1617A'... No
> Probing for `Maxim MAX1668'... No
> Probing for `Maxim MAX1805'... No
> Probing for `Maxim MAX1989'... No
> Probing for `Maxim MAX6655/MAX6656'... No
> Probing for `TI THMC10'... No
> Probing for `National Semiconductor LM84'... No
> Probing for `Genesys Logic GL523SM'... No
> Probing for `Onsemi MC1066'... No
> Probing for `Maxim MAX1618'... No
> Probing for `Maxim MAX1619'... No
> Probing for `National Semiconductor LM82/LM83'... No
> Probing for `Maxim MAX6654'... No
> Probing for `Maxim MAX6690'... No
> Probing for `Maxim MAX6680/MAX6681'... No
> Probing for `Maxim MAX6695/MAX6696'... No
> Probing for `Texas Instruments AMC6821'... No
> Probing for `National Semiconductor LM95231'... No
> Probing for `National Semiconductor LM95241'... No
> Probing for `National Semiconductor LM95245'... No
> Probing for `ST STTS424'... No
> Probing for `ST STTS424E'... No
> Probing for `ST STTS2002'... No
> Probing for `ST STTS3000'... No
> Probing for `NXP SE97/SE97B'... No
> Probing for `NXP SE98'... No
> Probing for `Analog Devices ADT7408'... No
> Probing for `IDT TS3000/TSE2002'... No
> Probing for `Maxim MAX6604'... No
> Probing for `Microchip MCP9804'... No
> Probing for `Microchip MCP98242'... No
> Probing for `Microchip MCP98243'... No
> Probing for `Microchip MCP98244'... No
> Probing for `Microchip MCP9843'... No
> Probing for `ON CAT6095/CAT34TS02'... No
> Probing for `Atmel AT30TS00'... No
> Client found at address 0x1a
> Probing for `Analog Devices ADM1021'... No
> Probing for `Analog Devices ADM1021A/ADM1023'... No
> Probing for `Maxim MAX1617'... No
> Probing for `Maxim MAX1617A'... No
> Probing for `Maxim MAX1668'... No
> Probing for `Maxim MAX1805'... No
> Probing for `Maxim MAX1989'... No
> Probing for `Maxim MAX6655/MAX6656'... No
> Probing for `TI THMC10'... No
> Probing for `National Semiconductor LM84'... No
> Probing for `Genesys Logic GL523SM'... No
> Probing for `Onsemi MC1066'... No
> Probing for `Maxim MAX1618'... No
> Probing for `Maxim MAX1619'... No
> Probing for `National Semiconductor LM82/LM83'... No
> Probing for `Maxim MAX6654'... No
> Probing for `Maxim MAX6690'... No
> Probing for `Maxim MAX6680/MAX6681'... No
> Probing for `Maxim MAX6695/MAX6696'... No
> Probing for `Texas Instruments AMC6821'... No
> Probing for `ST STTS424'... No
> Probing for `ST STTS424E'... No
> Probing for `ST STTS2002'... No
> Probing for `ST STTS3000'... No
> Probing for `NXP SE97/SE97B'... No
> Probing for `NXP SE98'... No
> Probing for `Analog Devices ADT7408'... No
> Probing for `IDT TS3000/TSE2002'... No
> Probing for `Maxim MAX6604'... No
> Probing for `Microchip MCP9804'... No
> Probing for `Microchip MCP98242'... No
> Probing for `Microchip MCP98243'... No
> Probing for `Microchip MCP98244'... No
> Probing for `Microchip MCP9843'... No
> Probing for `ON CAT6095/CAT34TS02'... No
> Probing for `Atmel AT30TS00'... No
> Client found at address 0x1b
> Probing for `ST STTS424'... No
> Probing for `ST STTS424E'... No
> Probing for `ST STTS2002'... No
> Probing for `ST STTS3000'... No
> Probing for `NXP SE97/SE97B'... No
> Probing for `NXP SE98'... No
> Probing for `Analog Devices ADT7408'... No
> Probing for `IDT TS3000/TSE2002'... No
> Probing for `Maxim MAX6604'... No
> Probing for `Microchip MCP9804'... No
> Probing for `Microchip MCP98242'... No
> Probing for `Microchip MCP98243'... No
> Probing for `Microchip MCP98244'... No
> Probing for `Microchip MCP9843'... No
> Probing for `ON CAT6095/CAT34TS02'... No
> Probing for `Atmel AT30TS00'... No
> Client found at address 0x1c
> Probing for `Texas Instruments TMP421'... No
> Probing for `SMSC EMC1072'... No
> Probing for `SMSC EMC1073'... No
> Probing for `SMSC EMC1074'... No
> Probing for `ST STTS424'... No
> Probing for `ST STTS424E'... No
> Probing for `ST STTS2002'... No
> Probing for `ST STTS3000'... No
> Probing for `NXP SE97/SE97B'... No
> Probing for `NXP SE98'... No
> Probing for `Analog Devices ADT7408'... No
> Probing for `IDT TS3000/TSE2002'... No
> Probing for `Maxim MAX6604'... No
> Probing for `Microchip MCP9804'... No
> Probing for `Microchip MCP98242'... No
> Probing for `Microchip MCP98243'... No
> Probing for `Microchip MCP98244'... No
> Probing for `Microchip MCP9843'... No
> Probing for `ON CAT6095/CAT34TS02'... No
> Probing for `Atmel AT30TS00'... No
> Client found at address 0x1d
> Probing for `Texas Instruments TMP421'... No
> Probing for `ST STTS424'... No
> Probing for `ST STTS424E'... No
> Probing for `ST STTS2002'... No
> Probing for `ST STTS3000'... No
> Probing for `NXP SE97/SE97B'... No
> Probing for `NXP SE98'... No
> Probing for `Analog Devices ADT7408'... No
> Probing for `IDT TS3000/TSE2002'... No
> Probing for `Maxim MAX6604'... No
> Probing for `Microchip MCP9804'... No
> Probing for `Microchip MCP98242'... No
> Probing for `Microchip MCP98243'... No
> Probing for `Microchip MCP98244'... No
> Probing for `Microchip MCP9843'... No
> Probing for `ON CAT6095/CAT34TS02'... No
> Probing for `Atmel AT30TS00'... No
> Client found at address 0x1e
> Probing for `Texas Instruments TMP421'... No
> Probing for `ST STTS424'... No
> Probing for `ST STTS424E'... No
> Probing for `ST STTS2002'... No
> Probing for `ST STTS3000'... No
> Probing for `NXP SE97/SE97B'... No
> Probing for `NXP SE98'... No
> Probing for `Analog Devices ADT7408'... No
> Probing for `IDT TS3000/TSE2002'... No
> Probing for `Maxim MAX6604'... No
> Probing for `Microchip MCP9804'... No
> Probing for `Microchip MCP98242'... No
> Probing for `Microchip MCP98243'... No
> Probing for `Microchip MCP98244'... No
> Probing for `Microchip MCP9843'... No
> Probing for `ON CAT6095/CAT34TS02'... No
> Probing for `Atmel AT30TS00'... No
> Client found at address 0x1f
> Probing for `Texas Instruments TMP421'... No
> Probing for `ST STTS424'... No
> Probing for `ST STTS424E'... No
> Probing for `ST STTS2002'... No
> Probing for `ST STTS3000'... No
> Probing for `NXP SE97/SE97B'... No
> Probing for `NXP SE98'... No
> Probing for `Analog Devices ADT7408'... No
> Probing for `IDT TS3000/TSE2002'... No
> Probing for `Maxim MAX6604'... No
> Probing for `Microchip MCP9804'... No
> Probing for `Microchip MCP98242'... No
> Probing for `Microchip MCP98243'... No
> Probing for `Microchip MCP98244'... No
> Probing for `Microchip MCP9843'... No
> Probing for `ON CAT6095/CAT34TS02'... No
> Probing for `Atmel AT30TS00'... No
> Client found at address 0x28
> Probing for `National Semiconductor LM78'... No
> Probing for `National Semiconductor LM79'... No
> Probing for `National Semiconductor LM80'... No
> Probing for `National Semiconductor LM96080'... No
> Probing for `Winbond W83781D'... No
> Probing for `Winbond W83782D'... No
> Probing for `Winbond W83627HF'... No
> Probing for `Winbond W83627EHF'... No
> Probing for `Winbond W83627DHG/W83667HG/W83677HG'... No
> Probing for `Asus AS99127F (rev.1)'... No
> Probing for `Asus AS99127F (rev.2)'... No
> Probing for `Asus ASB100 Bach'... No
> Probing for `Analog Devices ADM1029'... No
> Probing for `ITE IT8712F'... No
> Client found at address 0x29
> Probing for `National Semiconductor LM78'... No
> Probing for `National Semiconductor LM79'... No
> Probing for `National Semiconductor LM80'... No
> Probing for `National Semiconductor LM96080'... No
> Probing for `Winbond W83781D'... No
> Probing for `Winbond W83782D'... No
> Probing for `Winbond W83627HF'... No
> Probing for `Winbond W83627EHF'... No
> Probing for `Winbond W83627DHG/W83667HG/W83677HG'... No
> Probing for `Asus AS99127F (rev.1)'... No
> Probing for `Asus AS99127F (rev.2)'... No
> Probing for `Asus ASB100 Bach'... No
> Probing for `Analog Devices ADM1021'... No
> Probing for `Analog Devices ADM1021A/ADM1023'... No
> Probing for `Maxim MAX1617'... No
> Probing for `Maxim MAX1617A'... No
> Probing for `Maxim MAX1668'... No
> Probing for `Maxim MAX1805'... No
> Probing for `Maxim MAX1989'... No
> Probing for `Maxim MAX6655/MAX6656'... No
> Probing for `TI THMC10'... No
> Probing for `National Semiconductor LM84'... No
> Probing for `Genesys Logic GL523SM'... No
> Probing for `Onsemi MC1066'... No
> Probing for `Maxim MAX1618'... No
> Probing for `Maxim MAX1619'... No
> Probing for `National Semiconductor LM82/LM83'... No
> Probing for `Maxim MAX6654'... No
> Probing for `Maxim MAX6690'... No
> Probing for `Maxim MAX6680/MAX6681'... No
> Probing for `Maxim MAX6695/MAX6696'... No
> Probing for `National Semiconductor LM95245'... No
> Probing for `Analog Devices ADM1029'... No
> Probing for `ITE IT8712F'... No
> Probing for `SMSC EMC1402'... No
> Probing for `SMSC EMC1403'... No
> Probing for `SMSC EMC1404'... No
> Client found at address 0x2a
> Probing for `National Semiconductor LM78'... No
> Probing for `National Semiconductor LM79'... No
> Probing for `National Semiconductor LM80'... No
> Probing for `National Semiconductor LM96080'... No
> Probing for `Winbond W83781D'... No
> Probing for `Winbond W83782D'... No
> Probing for `Winbond W83627HF'... No
> Probing for `Winbond W83627EHF'... No
> Probing for `Winbond W83627DHG/W83667HG/W83677HG'... No
> Probing for `Asus AS99127F (rev.1)'... No
> Probing for `Asus AS99127F (rev.2)'... No
> Probing for `Asus ASB100 Bach'... No
> Probing for `Analog Devices ADM1021'... No
> Probing for `Analog Devices ADM1021A/ADM1023'... No
> Probing for `Maxim MAX1617'... No
> Probing for `Maxim MAX1617A'... No
> Probing for `Maxim MAX1668'... No
> Probing for `Maxim MAX1805'... No
> Probing for `Maxim MAX1989'... No
> Probing for `Maxim MAX6655/MAX6656'... No
> Probing for `TI THMC10'... No
> Probing for `National Semiconductor LM84'... No
> Probing for `Genesys Logic GL523SM'... No
> Probing for `Onsemi MC1066'... No
> Probing for `Maxim MAX1618'... No
> Probing for `Maxim MAX1619'... No
> Probing for `National Semiconductor LM82/LM83'... No
> Probing for `Maxim MAX6654'... No
> Probing for `Maxim MAX6690'... No
> Probing for `Maxim MAX6680/MAX6681'... No
> Probing for `Maxim MAX6695/MAX6696'... No
> Probing for `Texas Instruments TMP421'... No
> Probing for `National Semiconductor LM95231'... No
> Probing for `National Semiconductor LM95241'... No
> Probing for `Analog Devices ADM1029'... No
> Probing for `ITE IT8712F'... No
> Client found at address 0x2b
> Probing for `National Semiconductor LM78'... No
> Probing for `National Semiconductor LM79'... No
> Probing for `National Semiconductor LM80'... No
> Probing for `National Semiconductor LM96080'... No
> Probing for `Winbond W83781D'... No
> Probing for `Winbond W83782D'... No
> Probing for `Winbond W83627HF'... No
> Probing for `Winbond W83627EHF'... No
> Probing for `Winbond W83627DHG/W83667HG/W83677HG'... No
> Probing for `Asus AS99127F (rev.1)'... No
> Probing for `Asus AS99127F (rev.2)'... No
> Probing for `Asus ASB100 Bach'... No
> Probing for `Analog Devices ADM1021'... No
> Probing for `Analog Devices ADM1021A/ADM1023'... No
> Probing for `Maxim MAX1617'... No
> Probing for `Maxim MAX1617A'... No
> Probing for `Maxim MAX1668'... No
> Probing for `Maxim MAX1805'... No
> Probing for `Maxim MAX1989'... No
> Probing for `Maxim MAX6655/MAX6656'... No
> Probing for `TI THMC10'... No
> Probing for `National Semiconductor LM84'... No
> Probing for `Genesys Logic GL523SM'... No
> Probing for `Onsemi MC1066'... No
> Probing for `Maxim MAX1618'... No
> Probing for `Maxim MAX1619'... No
> Probing for `National Semiconductor LM82/LM83'... No
> Probing for `Maxim MAX6654'... No
> Probing for `Maxim MAX6690'... No
> Probing for `Maxim MAX6680/MAX6681'... No
> Probing for `Maxim MAX6695/MAX6696'... No
> Probing for `National Semiconductor LM95231'... No
> Probing for `National Semiconductor LM95241'... No
> Probing for `Analog Devices ADM1029'... No
> Probing for `ITE IT8712F'... No
> Client found at address 0x2c
> Probing for `Myson MTP008'... No
> Probing for `National Semiconductor LM78'... No
> Probing for `National Semiconductor LM79'... No
> Probing for `National Semiconductor LM80'... No
> Probing for `National Semiconductor LM96080'... No
> Probing for `National Semiconductor LM85'... No
> Probing for `National Semiconductor LM96000 or PC8374L'... No
> Probing for `Analog Devices ADM1027'... No
> Probing for `Analog Devices ADT7460 or ADT7463'... No
> Probing for `SMSC EMC6D100 or EMC6D101'... No
> Probing for `SMSC EMC6D102'... No
> Probing for `SMSC EMC6D103'... No
> Probing for `SMSC EMC6D103S or EMC2300'... No
> Probing for `SMSC EMC6W201'... No
> Probing for `Winbond WPCD377I'... No
> Probing for `Analog Devices ADT7470'... No
> Probing for `Analog Devices ADT7473'... No
> Probing for `Analog Devices ADT7476'... No
> Probing for `Analog Devices ADT7490'... No
> Probing for `Andigilog aSC7611'... No
> Probing for `Andigilog aSC7621'... No
> Probing for `National Semiconductor LM87'... No
> Probing for `Analog Devices ADM1024'... No
> Probing for `National Semiconductor LM93'... No
> Probing for `National Semiconductor LM94 or LM96194'... No
> Probing for `Winbond W83781D'... No
> Probing for `Winbond W83782D'... No
> Probing for `Winbond W83791D'... No
> Probing for `Winbond W83792D'... No
> Probing for `Winbond W83793R/G'... No
> Probing for `Nuvoton W83795G/ADG'... No
> Probing for `Winbond W83627HF'... No
> Probing for `Winbond W83627EHF'... No
> Probing for `Winbond W83627DHG/W83667HG/W83677HG'... No
> Probing for `Asus AS99127F (rev.1)'... No
> Probing for `Asus AS99127F (rev.2)'... No
> Probing for `Asus ASB100 Bach'... No
> Probing for `Genesys Logic GL518SM'... No
> Probing for `Genesys Logic GL520SM'... No
> Probing for `Analog Devices ADM9240'... No
> Probing for `Dallas Semiconductor DS1780'... No
> Probing for `National Semiconductor LM81'... No
> Probing for `Analog Devices ADM1026'... No
> Probing for `Analog Devices ADM1025'... No
> Probing for `Philips NE1619'... No
> Probing for `Maxim MAX6639'... No
> Probing for `Texas Instruments AMC6821'... No
> Probing for `Analog Devices ADM1029'... No
> Probing for `Analog Devices ADM1030'... No
> Probing for `Analog Devices ADM1031'... No
> Probing for `Analog Devices ADM1022'... No
> Probing for `Texas Instruments THMC50'... No
> Probing for `ITE IT8712F'... No
> Probing for `ALi M5879'... No
> Probing for `SMSC LPC47M15x/192/292/997'... No
> Probing for `SMSC DME1737'... No
> Probing for `SMSC SCH5027D-NW'... No
> Probing for `Winbond W83791SD'... No
> Client found at address 0x2d
> Probing for `Myson MTP008'... No
> Probing for `National Semiconductor LM78'... No
> Probing for `National Semiconductor LM79'... No
> Probing for `National Semiconductor LM80'... No
> Probing for `National Semiconductor LM96080'... No
> Probing for `National Semiconductor LM85'... No
> Probing for `National Semiconductor LM96000 or PC8374L'... No
> Probing for `Analog Devices ADM1027'... No
> Probing for `Analog Devices ADT7460 or ADT7463'... No
> Probing for `SMSC EMC6D100 or EMC6D101'... No
> Probing for `SMSC EMC6D102'... No
> Probing for `SMSC EMC6D103'... No
> Probing for `SMSC EMC6D103S or EMC2300'... No
> Probing for `SMSC EMC6W201'... No
> Probing for `Winbond WPCD377I'... No
> Probing for `Analog Devices ADT7473'... No
> Probing for `Analog Devices ADT7476'... No
> Probing for `Analog Devices ADT7490'... No
> Probing for `Andigilog aSC7611'... No
> Probing for `Andigilog aSC7621'... No
> Probing for `National Semiconductor LM87'... No
> Probing for `Analog Devices ADM1024'... No
> Probing for `National Semiconductor LM93'... No
> Probing for `National Semiconductor LM94 or LM96194'... No
> Probing for `Winbond W83781D'... No
> Probing for `Winbond W83782D'... No
> Probing for `Winbond W83783S'... No
> Probing for `Winbond W83791D'... No
> Probing for `Winbond W83792D'... No
> Probing for `Winbond W83793R/G'... No
> Probing for `Nuvoton W83795G/ADG'... No
> Probing for `Winbond W83627HF'... No
> Probing for `Winbond W83627EHF'... No
> Probing for `Winbond W83627DHG/W83667HG/W83677HG'... No
> Probing for `Asus AS99127F (rev.1)'... No
> Probing for `Asus AS99127F (rev.2)'... No
> Probing for `Asus ASB100 Bach'... No
> Probing for `Winbond W83L784R/AR/G'... No
> Probing for `Winbond W83L785R/G'... No
> Probing for `Genesys Logic GL518SM'... No
> Probing for `Genesys Logic GL520SM'... No
> Probing for `Genesys Logic GL525SM'... No
> Probing for `Analog Devices ADM9240'... No
> Probing for `Dallas Semiconductor DS1780'... No
> Probing for `National Semiconductor LM81'... No
> Probing for `Analog Devices ADM1026'... No
> Probing for `Analog Devices ADM1025'... No
> Probing for `Philips NE1619'... No
> Probing for `Texas Instruments AMC6821'... No
> Probing for `Analog Devices ADM1029'... No
> Probing for `Analog Devices ADM1030'... No
> Probing for `Analog Devices ADM1031'... No
> Probing for `Analog Devices ADM1022'... No
> Probing for `Texas Instruments THMC50'... No
> Probing for `VIA VT1211 (I2C)'... No
> Probing for `ITE IT8712F'... No
> Probing for `ALi M5879'... No
> Probing for `SMSC LPC47M15x/192/292/997'... No
> Probing for `SMSC DME1737'... No
> Probing for `SMSC SCH5027D-NW'... No
> Probing for `Fintek F75373S/SG'... No
> Probing for `Fintek F75375S/SP'... No
> Probing for `Fintek F75387SG/RG'... No
> Probing for `Winbond W83791SD'... No
> Client found at address 0x2e
> Probing for `Myson MTP008'... No
> Probing for `National Semiconductor LM78'... No
> Probing for `National Semiconductor LM79'... No
> Probing for `National Semiconductor LM80'... No
> Probing for `National Semiconductor LM96080'... No
> Probing for `National Semiconductor LM85'... No
> Probing for `National Semiconductor LM96000 or PC8374L'... No
> Probing for `Analog Devices ADM1027'... No
> Probing for `Analog Devices ADT7460 or ADT7463'... No
> Probing for `SMSC EMC6D100 or EMC6D101'... No
> Probing for `SMSC EMC6D102'... No
> Probing for `SMSC EMC6D103'... No
> Probing for `SMSC EMC6D103S or EMC2300'... No
> Probing for `SMSC EMC6W201'... No
> Probing for `Winbond WPCD377I'... No
> Probing for `Analog Devices ADT7467 or ADT7468'... No
> Probing for `Analog Devices ADT7470'... No
> Probing for `Analog Devices ADT7473'... No
> Probing for `Analog Devices ADT7475'... No
> Probing for `Analog Devices ADT7476'... No
> Probing for `Analog Devices ADT7490'... No
> Probing for `Andigilog aSC7611'... No
> Probing for `Andigilog aSC7621'... No
> Probing for `National Semiconductor LM87'... No
> Probing for `Analog Devices ADM1024'... No
> Probing for `National Semiconductor LM93'... No
> Probing for `National Semiconductor LM94 or LM96194'... No
> Probing for `Winbond W83781D'... No
> Probing for `Winbond W83782D'... No
> Probing for `Winbond W83791D'... No
> Probing for `Winbond W83792D'... No
> Probing for `Winbond W83793R/G'... No
> Probing for `Nuvoton W83795G/ADG'... No
> Probing for `Winbond W83627HF'... No
> Probing for `Winbond W83627EHF'... No
> Probing for `Winbond W83627DHG/W83667HG/W83677HG'... No
> Probing for `Asus AS99127F (rev.1)'... No
> Probing for `Asus AS99127F (rev.2)'... No
> Probing for `Asus ASB100 Bach'... No
> Probing for `Winbond W83L786NR/NG/R/G'... No
> Probing for `Winbond W83L785TS-S'... No
> Probing for `Analog Devices ADM9240'... No
> Probing for `Dallas Semiconductor DS1780'... No
> Probing for `National Semiconductor LM81'... No
> Probing for `Analog Devices ADM1026'... No
> Probing for `Analog Devices ADM1025'... No
> Probing for `Maxim MAX6639'... No
> Probing for `Texas Instruments AMC6821'... No
> Probing for `Analog Devices ADM1029'... No
> Probing for `Analog Devices ADM1030'... No
> Probing for `Analog Devices ADM1031'... No
> Probing for `Analog Devices ADM1022'... No
> Probing for `Texas Instruments THMC50'... No
> Probing for `Analog Devices ADM1028'... No
> Probing for `Texas Instruments THMC51'... No
> Probing for `ITE IT8712F'... No
> Probing for `SMSC DME1737'... No
> Probing for `SMSC SCH5027D-NW'... No
> Probing for `SMSC EMC2103'... No
> Probing for `Fintek F75373S/SG'... No
> Probing for `Fintek F75375S/SP'... No
> Probing for `Fintek F75387SG/RG'... No
> Probing for `Winbond W83791SD'... No
> Client found at address 0x2f
> Probing for `National Semiconductor LM78'... No
> Probing for `National Semiconductor LM79'... No
> Probing for `National Semiconductor LM80'... No
> Probing for `National Semiconductor LM96080'... No
> Probing for `Analog Devices ADT7470'... No
> Probing for `Winbond W83781D'... No
> Probing for `Winbond W83782D'... No
> Probing for `Winbond W83791D'... No
> Probing for `Winbond W83792D'... No
> Probing for `Winbond W83793R/G'... No
> Probing for `Nuvoton W83795G/ADG'... No
> Probing for `Winbond W83627HF'... No
> Probing for `Winbond W83627EHF'... No
> Probing for `Winbond W83627DHG/W83667HG/W83677HG'... No
> Probing for `Asus AS99127F (rev.1)'... No
> Probing for `Asus AS99127F (rev.2)'... No
> Probing for `Asus ASB100 Bach'... No
> Probing for `Winbond W83L786NR/NG/R/G'... No
> Probing for `Analog Devices ADM9240'... No
> Probing for `Dallas Semiconductor DS1780'... No
> Probing for `National Semiconductor LM81'... No
> Probing for `Maxim MAX6639'... No
> Probing for `Analog Devices ADM1029'... No
> Probing for `ITE IT8712F'... No
> Probing for `Fintek custom power control IC'... No
> Probing for `Winbond W83791SD'... No
> Client found at address 0x48
> Probing for `National Semiconductor LM75'... No
> Probing for `National Semiconductor LM75A'... No
> Probing for `Dallas Semiconductor DS75'... No
> Probing for `National Semiconductor LM77'... No
> Probing for `Analog Devices ADT7410/ADT7420'... No
> Probing for `Analog Devices ADT7411'... No
> Probing for `Maxim MAX6642'... No
> Probing for `National Semiconductor LM73'... No
> Probing for `National Semiconductor LM92'... No
> Probing for `National Semiconductor LM76'... No
> Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
> Probing for `NXP/Philips SA56004'... No
> Probing for `SMSC EMC1023'... No
> Probing for `SMSC EMC1043'... No
> Probing for `SMSC EMC1053'... No
> Probing for `SMSC EMC1063'... No
> Client found at address 0x49
> Probing for `National Semiconductor LM75'... No
> Probing for `National Semiconductor LM75A'... No
> Probing for `Dallas Semiconductor DS75'... No
> Probing for `National Semiconductor LM77'... No
> Probing for `Analog Devices ADT7410/ADT7420'... No
> Probing for `Maxim MAX6642'... No
> Probing for `National Semiconductor LM73'... No
> Probing for `National Semiconductor LM92'... No
> Probing for `National Semiconductor LM76'... No
> Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
> Probing for `NXP/Philips SA56004'... No
> Probing for `SMSC EMC1023'... No
> Probing for `SMSC EMC1043'... No
> Probing for `SMSC EMC1053'... No
> Probing for `SMSC EMC1063'... No
> Client found at address 0x4a
> Probing for `National Semiconductor LM75'... No
> Probing for `National Semiconductor LM75A'... No
> Probing for `Dallas Semiconductor DS75'... No
> Probing for `National Semiconductor LM77'... No
> Probing for `Analog Devices ADT7410/ADT7420'... No
> Probing for `Analog Devices ADT7411'... No
> Probing for `Maxim MAX6642'... No
> Probing for `National Semiconductor LM73'... No
> Probing for `National Semiconductor LM92'... No
> Probing for `National Semiconductor LM76'... No
> Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
> Probing for `NXP/Philips SA56004'... No
> Client found at address 0x4b
> Probing for `National Semiconductor LM75'... No
> Probing for `National Semiconductor LM75A'... No
> Probing for `Dallas Semiconductor DS75'... No
> Probing for `National Semiconductor LM77'... No
> Probing for `Analog Devices ADT7410/ADT7420'... No
> Probing for `Analog Devices ADT7411'... No
> Probing for `Maxim MAX6642'... No
> Probing for `National Semiconductor LM92'... No
> Probing for `National Semiconductor LM76'... No
> Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
> Probing for `NXP/Philips SA56004'... No
> Probing for `Analog Devices ADT7481'... No
> Client found at address 0x4c
> Probing for `National Semiconductor LM75'... No
> Probing for `National Semiconductor LM75A'... No
> Probing for `Dallas Semiconductor DS75'... No
> Probing for `Analog Devices ADT7466'... No
> Probing for `Andigilog aSC7511'... No
> Probing for `Analog Devices ADM1021'... No
> Probing for `Analog Devices ADM1021A/ADM1023'... No
> Probing for `Global Mixed-mode Technology G781'... No
> Probing for `Maxim MAX1617'... No
> Probing for `Maxim MAX1617A'... No
> Probing for `Maxim MAX1668'... No
> Probing for `Maxim MAX1805'... No
> Probing for `Maxim MAX1989'... No
> Probing for `Maxim MAX6642'... No
> Probing for `Maxim MAX6655/MAX6656'... No
> Probing for `TI THMC10'... No
> Probing for `National Semiconductor LM84'... No
> Probing for `Genesys Logic GL523SM'... No
> Probing for `Onsemi MC1066'... No
> Probing for `Maxim MAX1618'... No
> Probing for `Maxim MAX1619'... No
> Probing for `National Semiconductor LM82/LM83'... No
> Probing for `National Semiconductor LM90'... No
> Probing for `National Semiconductor LM89/LM99'... No
> Probing for `National Semiconductor LM86'... No
> Probing for `Analog Devices ADM1032'... No
> Probing for `Maxim MAX6654'... No
> Probing for `Maxim MAX6690'... No
> Probing for `Maxim MAX6657/MAX6658/MAX6659'... No
> Probing for `Maxim MAX6648/MAX6649/MAX6692'... No
> Probing for `Maxim MAX6680/MAX6681'... No
> Probing for `Maxim MAX6695/MAX6696'... No
> Probing for `Winbond W83L771W/G'... No
> Probing for `Winbond W83L771AWG/ASG'... No
> Probing for `Texas Instruments TMP401'... No
> Probing for `Texas Instruments TMP411'... No
> Probing for `Texas Instruments TMP421'... No
> Probing for `Texas Instruments TMP422'... No
> Probing for `Texas Instruments TMP423'... No
> Probing for `Texas Instruments TMP431'... No
> Probing for `Texas Instruments TMP432'... No
> Probing for `Texas Instruments AMC6821'... No
> Probing for `National Semiconductor LM95245'... No
> Probing for `National Semiconductor LM63'... No
> Probing for `National Semiconductor LM96163'... No
> Probing for `Fintek F75363SG'... No
> Probing for `National Semiconductor LM73'... No
> Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
> Probing for `Analog Devices ADT7461'... No
> Probing for `Analog Devices ADT7461A, ON Semiconductor NCT1008'... No
> Probing for `NXP/Philips SA56004'... No
> Probing for `Analog Devices ADT7481'... No
> Probing for `Fintek F75383S/M'... No
> Probing for `SMSC EMC1002'... No
> Probing for `SMSC EMC1023'... No
> Probing for `SMSC EMC1033'... No
> Probing for `SMSC EMC1043'... No
> Probing for `SMSC EMC1046'... No
> Probing for `SMSC EMC1053'... No
> Probing for `SMSC EMC1063'... No
> Probing for `SMSC EMC1072'... No
> Probing for `SMSC EMC1073'... No
> Probing for `SMSC EMC1074'... No
> Probing for `SMSC EMC1402'... No
> Probing for `SMSC EMC1403'... No
> Probing for `SMSC EMC1404'... No
> Probing for `SMSC EMC1423'... No
> Probing for `SMSC EMC1424'... No
> Client found at address 0x4d
> Probing for `National Semiconductor LM75'... No
> Probing for `National Semiconductor LM75A'... No
> Probing for `Dallas Semiconductor DS75'... No
> Probing for `Analog Devices ADM1021'... No
> Probing for `Analog Devices ADM1021A/ADM1023'... No
> Probing for `Global Mixed-mode Technology G781'... No
> Probing for `Maxim MAX1617'... No
> Probing for `Maxim MAX1617A'... No
> Probing for `Maxim MAX1668'... No
> Probing for `Maxim MAX1805'... No
> Probing for `Maxim MAX1989'... No
> Probing for `Maxim MAX6642'... No
> Probing for `Maxim MAX6655/MAX6656'... No
> Probing for `TI THMC10'... No
> Probing for `National Semiconductor LM84'... No
> Probing for `Genesys Logic GL523SM'... No
> Probing for `Onsemi MC1066'... No
> Probing for `Maxim MAX1618'... No
> Probing for `Maxim MAX1619'... No
> Probing for `National Semiconductor LM82/LM83'... No
> Probing for `National Semiconductor LM89/LM99'... No
> Probing for `Analog Devices ADM1032'... No
> Probing for `Maxim MAX6654'... No
> Probing for `Maxim MAX6690'... No
> Probing for `Maxim MAX6659'... No
> Probing for `Maxim MAX6646'... No
> Probing for `Maxim MAX6680/MAX6681'... No
> Probing for `Maxim MAX6695/MAX6696'... No
> Probing for `Texas Instruments TMP411'... No
> Probing for `Texas Instruments TMP421'... No
> Probing for `Texas Instruments TMP422'... No
> Probing for `Texas Instruments TMP423'... No
> Probing for `Texas Instruments TMP431'... No
> Probing for `Texas Instruments TMP432'... No
> Probing for `Texas Instruments AMC6821'... No
> Probing for `National Semiconductor LM95234'... No
> Probing for `National Semiconductor LM95245'... No
> Probing for `National Semiconductor LM73'... No
> Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
> Probing for `Analog Devices ADT7461'... No
> Probing for `Analog Devices ADT7461A, ON Semiconductor NCT1008'... No
> Probing for `NXP/Philips SA56004'... No
> Probing for `Fintek F75384S/M'... No
> Probing for `SMSC EMC1002'... No
> Probing for `SMSC EMC1023'... No
> Probing for `SMSC EMC1033'... No
> Probing for `SMSC EMC1043'... No
> Probing for `SMSC EMC1046'... No
> Probing for `SMSC EMC1053'... No
> Probing for `SMSC EMC1063'... No
> Probing for `SMSC EMC1402'... No
> Probing for `SMSC EMC1403'... No
> Probing for `SMSC EMC1404'... No
> Client found at address 0x4e
> Probing for `National Semiconductor LM75'... No
> Probing for `National Semiconductor LM75A'... No
> Probing for `Dallas Semiconductor DS75'... No
> Probing for `Analog Devices ADM1021'... No
> Probing for `Analog Devices ADM1021A/ADM1023'... No
> Probing for `Maxim MAX1617'... No
> Probing for `Maxim MAX1617A'... No
> Probing for `Maxim MAX1668'... No
> Probing for `Maxim MAX1805'... No
> Probing for `Maxim MAX1989'... No
> Probing for `Maxim MAX6642'... No
> Probing for `Maxim MAX6655/MAX6656'... No
> Probing for `TI THMC10'... No
> Probing for `National Semiconductor LM84'... No
> Probing for `Genesys Logic GL523SM'... No
> Probing for `Onsemi MC1066'... No
> Probing for `Maxim MAX1618'... No
> Probing for `Maxim MAX1619'... No
> Probing for `National Semiconductor LM82/LM83'... No
> Probing for `Maxim MAX6654'... No
> Probing for `Maxim MAX6690'... No
> Probing for `Maxim MAX6659'... No
> Probing for `Maxim MAX6647'... No
> Probing for `Maxim MAX6680/MAX6681'... No
> Probing for `Maxim MAX6695/MAX6696'... No
> Probing for `Texas Instruments TMP411'... No
> Probing for `Texas Instruments TMP421'... No
> Probing for `Texas Instruments TMP422'... No
> Probing for `Texas Instruments AMC6821'... No
> Probing for `National Semiconductor LM95234'... No
> Probing for `National Semiconductor LM64'... No
> Probing for `National Semiconductor LM73'... No
> Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
> Probing for `NXP/Philips SA56004'... No
> Probing for `Fintek F75121R/F75122R/RG (VID+GPIO)'... No
> Probing for `Fintek F75111R/RG/N (GPIO)'... No
> Probing for `ITE IT8201R/IT8203R/IT8206R/IT8266R'... No
> Client found at address 0x4f
> Probing for `National Semiconductor LM75'... No
> Probing for `National Semiconductor LM75A'... No
> Probing for `Dallas Semiconductor DS75'... No
> Probing for `Maxim MAX6642'... No
> Probing for `Texas Instruments TMP421'... No
> Probing for `Texas Instruments TMP422'... No
> Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
> Probing for `NXP/Philips SA56004'... No
> Client found at address 0x50
> Probing for `Analog Devices ADM1033'... No
> Probing for `Analog Devices ADM1034'... No
> Probing for `SPD EEPROM'... No
> Probing for `EDID EEPROM'... Yes
> (confidence 8, not a hardware monitoring chip)
> Client found at address 0x51
> Probing for `Analog Devices ADM1033'... No
> Probing for `Analog Devices ADM1034'... No
> Probing for `SPD EEPROM'... No
> Client found at address 0x52
> Probing for `Analog Devices ADM1033'... No
> Probing for `Analog Devices ADM1034'... No
> Probing for `SPD EEPROM'... No
> Client found at address 0x53
> Probing for `Analog Devices ADM1033'... No
> Probing for `Analog Devices ADM1034'... No
> Probing for `SPD EEPROM'... No
> Client found at address 0x58
> Probing for `Analog Devices ADT7462'... No
> Probing for `Andigilog aSC7512'... No
> Client found at address 0x5c
> Probing for `Analog Devices ADT7462'... No
> Probing for `SMSC EMC1072'... No
> Probing for `SMSC EMC1073'... No
> Probing for `SMSC EMC1074'... No
> Client found at address 0x73
> Probing for `FSC Poseidon I'... No
> Probing for `FSC Poseidon II'... No
> Probing for `FSC Scylla'... No
> Probing for `FSC Hermes'... No
> Probing for `FSC Heimdal'... No
> Probing for `FSC Heracles'... No
> Probing for `FSC Hades'... No
> Probing for `FSC Syleus'... No
> Client found at address 0x77
> Probing for `Asus Mozart-2'... No
>
>
>
> Next adapter: DPDDC-C (i2c-7)
> Do you want to scan it? (YES/no/selectively): y
>
> Next adapter: DPDDC-D (i2c-8)
> Do you want to scan it? (YES/no/selectively): y
>
> Now follows a summary of the probes I have just done.
> Just press ENTER to continue:
>
> Driver `coretemp':
> * Chip `Intel digital thermal sensor' (confidence: 9)
>
> Do you want to overwrite /etc/sysconfig/lm_sensors? (YES/no): y
> Copy prog/init/lm_sensors.init to /etc/init.d/lm_sensors
> for initialization at boot time.
> You should now start the lm_sensors service to load the required
> kernel modules.
>
> Unloading i2c-dev... OK
> Unloading i2c-i801... OK
> Unloading cpuid... OK
> =======================================
>
> # pwmconfig revision 6166 (2013-05-01)
> This program will search your sensors for pulse width modulation (pwm)
> controls, and test each one to see if it controls a fan on
> your motherboard. Note that many motherboards do not have pwm
> circuitry installed, even if your sensor chip supports pwm.
>
> We will attempt to briefly stop each fan using the pwm controls.
> The program will attempt to restore each fan to full speed
> after testing. However, it is ** very important ** that you
> physically verify that the fans have been to full speed
> after the program has completed.
>
> /usr/local/sbin/pwmconfig: There are no pwm-capable sensor modules installed
>
>
>
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (2 preceding siblings ...)
2013-11-11 17:38 ` Guenter Roeck
@ 2013-11-11 18:17 ` p. stephen w
2013-11-11 18:29 ` Guenter Roeck
` (40 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: p. stephen w @ 2013-11-11 18:17 UTC (permalink / raw)
To: lm-sensors
I just followed the link from the lm-sensors devices page to the GitHub
page (is that yours?), and re-cloned it. This time the output was a little
different, and I have a few .ko files in my personal directory. They are
not in the hwmon dir. I thought I might try moving them there and
re-running sensors-detect.
Githum repo:
https://github.com/groeck/nct6775.git
Make:
Mint nct6775 # make all
CC [M] /home/stephen/nct6775/nct6775.o
Building modules, stage 2.
MODPOST 1 modules
CC /home/stephen/nct6775/nct6775.mod.o
LD [M] /home/stephen/nct6775/nct6775.ko
Contents of home dir after make all:
Mint nct6775 # ls
compat.h Makefile nct6775.c nct6775.mod.o README.ASRock
LICENSE modules.order nct6775.ko nct6775.o
lm75.h Module.symvers nct6775.mod.c README
Sensors -v
Mint nct6775 # sensors -v
sensors version 3.3.4 with libsensors version 3.3.4
I run everything as root.
Should I copy any of the .ko, .o, and .c files from your driver into any
other folders?
I'm using the sensors-detect that came with the manual installation of
lm-sensors, latest version. I don't have a prog/detect, either folder or
command.
Just run sensors_detect from prog/detect/. I am not sure if you actually
installed it. If not, you just keep running the installed version.
--
_____________________________
Stephen Wille | pstephenwille.com
*new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (3 preceding siblings ...)
2013-11-11 18:17 ` p. stephen w
@ 2013-11-11 18:29 ` Guenter Roeck
2013-11-11 18:31 ` p. stephen w
` (39 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: Guenter Roeck @ 2013-11-11 18:29 UTC (permalink / raw)
To: lm-sensors
On Mon, Nov 11, 2013 at 10:17:00AM -0800, p. stephen w wrote:
> I just followed the link from the lm-sensors devices page to the GitHub
> page (is that yours?), and re-cloned it. This time the output was a little
> different, and I have a few .ko files in my personal directory. They are
> not in the hwmon dir. I thought I might try moving them there and
> re-running sensors-detect.
>
> Githum repo:
> https://github.com/groeck/nct6775.git
>
> Make:
> Mint nct6775 # make all
> CC [M] /home/stephen/nct6775/nct6775.o
>
> Building modules, stage 2.
> MODPOST 1 modules
> CC /home/stephen/nct6775/nct6775.mod.o
> LD [M] /home/stephen/nct6775/nct6775.ko
>
>
I asked earlier if you did run "make install". Looks like you didn't.
> Contents of home dir after make all:
> Mint nct6775 # ls
> compat.h Makefile nct6775.c nct6775.mod.o README.ASRock
> LICENSE modules.order nct6775.ko nct6775.o
> lm75.h Module.symvers nct6775.mod.c README
>
>
> Sensors -v
> Mint nct6775 # sensors -v
> sensors version 3.3.4 with libsensors version 3.3.4
>
>
>
> I run everything as root.
> Should I copy any of the .ko, .o, and .c files from your driver into any
> other folders?
>
Run "make install" followed by "modprobe nct6775".
> I'm using the sensors-detect that came with the manual installation of
> lm-sensors, latest version. I don't have a prog/detect, either folder or
> command.
The prog/detect directory is in the lm-sensors source, so if you
cloned lm-sensors from github or svn you should have it.
Thanks,
Guenter
> Just run sensors_detect from prog/detect/. I am not sure if you actually
> installed it. If not, you just keep running the installed version.
>
> --
>
>
> _____________________________
> Stephen Wille | pstephenwille.com
> *new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
> _______________________________________________
> lm-sensors mailing list
> lm-sensors@lm-sensors.org
> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
>
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (4 preceding siblings ...)
2013-11-11 18:29 ` Guenter Roeck
@ 2013-11-11 18:31 ` p. stephen w
2013-11-11 19:11 ` Guenter Roeck
` (38 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: p. stephen w @ 2013-11-11 18:31 UTC (permalink / raw)
To: lm-sensors
woot-woot, that was it. Running Make install did the trick. Like I said,
I'm a Linux noob.
Where can I send you $50?
On Mon, Nov 11, 2013 at 10:29 AM, Guenter Roeck <linux@roeck-us.net> wrote:
> On Mon, Nov 11, 2013 at 10:17:00AM -0800, p. stephen w wrote:
> > I just followed the link from the lm-sensors devices page to the GitHub
> > page (is that yours?), and re-cloned it. This time the output was a
> little
> > different, and I have a few .ko files in my personal directory. They are
> > not in the hwmon dir. I thought I might try moving them there and
> > re-running sensors-detect.
> >
> > Githum repo:
> > https://github.com/groeck/nct6775.git
> >
> > Make:
> > Mint nct6775 # make all
> > CC [M] /home/stephen/nct6775/nct6775.o
> >
> > Building modules, stage 2.
> > MODPOST 1 modules
> > CC /home/stephen/nct6775/nct6775.mod.o
> > LD [M] /home/stephen/nct6775/nct6775.ko
> >
> >
> I asked earlier if you did run "make install". Looks like you didn't.
>
>
> > Contents of home dir after make all:
> > Mint nct6775 # ls
> > compat.h Makefile nct6775.c nct6775.mod.o README.ASRock
> > LICENSE modules.order nct6775.ko nct6775.o
> > lm75.h Module.symvers nct6775.mod.c README
> >
> >
> > Sensors -v
> > Mint nct6775 # sensors -v
> > sensors version 3.3.4 with libsensors version 3.3.4
> >
> >
> >
> > I run everything as root.
> > Should I copy any of the .ko, .o, and .c files from your driver into any
> > other folders?
> >
> Run "make install" followed by "modprobe nct6775".
>
> > I'm using the sensors-detect that came with the manual installation of
> > lm-sensors, latest version. I don't have a prog/detect, either folder or
> > command.
>
> The prog/detect directory is in the lm-sensors source, so if you
> cloned lm-sensors from github or svn you should have it.
>
> Thanks,
> Guenter
>
> > Just run sensors_detect from prog/detect/. I am not sure if you
> actually
> > installed it. If not, you just keep running the installed version.
> >
> > --
> >
> >
> > _____________________________
> > Stephen Wille | pstephenwille.com
> > *new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
> > _______________________________________________
> > lm-sensors mailing list
> > lm-sensors@lm-sensors.org
> > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
> >
>
--
_____________________________
Stephen Wille | pstephenwille.com
*new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (5 preceding siblings ...)
2013-11-11 18:31 ` p. stephen w
@ 2013-11-11 19:11 ` Guenter Roeck
2013-11-11 19:17 ` p. stephen w
` (37 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: Guenter Roeck @ 2013-11-11 19:11 UTC (permalink / raw)
To: lm-sensors
On Mon, Nov 11, 2013 at 10:31:40AM -0800, p. stephen w wrote:
> woot-woot, that was it. Running Make install did the trick. Like I said,
> I'm a Linux noob.
>
> Where can I send you $50?
>
That was free of charge ...
Guenter
>
> On Mon, Nov 11, 2013 at 10:29 AM, Guenter Roeck <linux@roeck-us.net> wrote:
>
> > On Mon, Nov 11, 2013 at 10:17:00AM -0800, p. stephen w wrote:
> > > I just followed the link from the lm-sensors devices page to the GitHub
> > > page (is that yours?), and re-cloned it. This time the output was a
> > little
> > > different, and I have a few .ko files in my personal directory. They are
> > > not in the hwmon dir. I thought I might try moving them there and
> > > re-running sensors-detect.
> > >
> > > Githum repo:
> > > https://github.com/groeck/nct6775.git
> > >
> > > Make:
> > > Mint nct6775 # make all
> > > CC [M] /home/stephen/nct6775/nct6775.o
> > >
> > > Building modules, stage 2.
> > > MODPOST 1 modules
> > > CC /home/stephen/nct6775/nct6775.mod.o
> > > LD [M] /home/stephen/nct6775/nct6775.ko
> > >
> > >
> > I asked earlier if you did run "make install". Looks like you didn't.
> >
> >
> > > Contents of home dir after make all:
> > > Mint nct6775 # ls
> > > compat.h Makefile nct6775.c nct6775.mod.o README.ASRock
> > > LICENSE modules.order nct6775.ko nct6775.o
> > > lm75.h Module.symvers nct6775.mod.c README
> > >
> > >
> > > Sensors -v
> > > Mint nct6775 # sensors -v
> > > sensors version 3.3.4 with libsensors version 3.3.4
> > >
> > >
> > >
> > > I run everything as root.
> > > Should I copy any of the .ko, .o, and .c files from your driver into any
> > > other folders?
> > >
> > Run "make install" followed by "modprobe nct6775".
> >
> > > I'm using the sensors-detect that came with the manual installation of
> > > lm-sensors, latest version. I don't have a prog/detect, either folder or
> > > command.
> >
> > The prog/detect directory is in the lm-sensors source, so if you
> > cloned lm-sensors from github or svn you should have it.
> >
> > Thanks,
> > Guenter
> >
> > > Just run sensors_detect from prog/detect/. I am not sure if you
> > actually
> > > installed it. If not, you just keep running the installed version.
> > >
> > > --
> > >
> > >
> > > _____________________________
> > > Stephen Wille | pstephenwille.com
> > > *new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
> > > _______________________________________________
> > > lm-sensors mailing list
> > > lm-sensors@lm-sensors.org
> > > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
> > >
> >
>
>
>
> --
>
>
> _____________________________
> Stephen Wille | pstephenwille.com
> *new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (6 preceding siblings ...)
2013-11-11 19:11 ` Guenter Roeck
@ 2013-11-11 19:17 ` p. stephen w
2013-11-11 19:46 ` p. stephen w
` (36 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: p. stephen w @ 2013-11-11 19:17 UTC (permalink / raw)
To: lm-sensors
Thanks, but I'd still like to contribute. I know this stuff takes time and
energy.
On Mon, Nov 11, 2013 at 11:11 AM, Guenter Roeck <linux@roeck-us.net> wrote:
> On Mon, Nov 11, 2013 at 10:31:40AM -0800, p. stephen w wrote:
> > woot-woot, that was it. Running Make install did the trick. Like I
> said,
> > I'm a Linux noob.
> >
> > Where can I send you $50?
> >
> That was free of charge ...
>
> Guenter
>
> >
> > On Mon, Nov 11, 2013 at 10:29 AM, Guenter Roeck <linux@roeck-us.net>
> wrote:
> >
> > > On Mon, Nov 11, 2013 at 10:17:00AM -0800, p. stephen w wrote:
> > > > I just followed the link from the lm-sensors devices page to the
> GitHub
> > > > page (is that yours?), and re-cloned it. This time the output was a
> > > little
> > > > different, and I have a few .ko files in my personal directory.
> They are
> > > > not in the hwmon dir. I thought I might try moving them there and
> > > > re-running sensors-detect.
> > > >
> > > > Githum repo:
> > > > https://github.com/groeck/nct6775.git
> > > >
> > > > Make:
> > > > Mint nct6775 # make all
> > > > CC [M] /home/stephen/nct6775/nct6775.o
> > > >
> > > > Building modules, stage 2.
> > > > MODPOST 1 modules
> > > > CC /home/stephen/nct6775/nct6775.mod.o
> > > > LD [M] /home/stephen/nct6775/nct6775.ko
> > > >
> > > >
> > > I asked earlier if you did run "make install". Looks like you didn't.
> > >
> > >
> > > > Contents of home dir after make all:
> > > > Mint nct6775 # ls
> > > > compat.h Makefile nct6775.c nct6775.mod.o README.ASRock
> > > > LICENSE modules.order nct6775.ko nct6775.o
> > > > lm75.h Module.symvers nct6775.mod.c README
> > > >
> > > >
> > > > Sensors -v
> > > > Mint nct6775 # sensors -v
> > > > sensors version 3.3.4 with libsensors version 3.3.4
> > > >
> > > >
> > > >
> > > > I run everything as root.
> > > > Should I copy any of the .ko, .o, and .c files from your driver into
> any
> > > > other folders?
> > > >
> > > Run "make install" followed by "modprobe nct6775".
> > >
> > > > I'm using the sensors-detect that came with the manual installation
> of
> > > > lm-sensors, latest version. I don't have a prog/detect, either
> folder or
> > > > command.
> > >
> > > The prog/detect directory is in the lm-sensors source, so if you
> > > cloned lm-sensors from github or svn you should have it.
> > >
> > > Thanks,
> > > Guenter
> > >
> > > > Just run sensors_detect from prog/detect/. I am not sure if you
> > > actually
> > > > installed it. If not, you just keep running the installed version.
> > > >
> > > > --
> > > >
> > > >
> > > > _____________________________
> > > > Stephen Wille | pstephenwille.com
> > > > *new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
> > > > _______________________________________________
> > > > lm-sensors mailing list
> > > > lm-sensors@lm-sensors.org
> > > > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
> > > >
> > >
> >
> >
> >
> > --
> >
> >
> > _____________________________
> > Stephen Wille | pstephenwille.com
> > *new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
>
--
_____________________________
Stephen Wille | pstephenwille.com
*new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (7 preceding siblings ...)
2013-11-11 19:17 ` p. stephen w
@ 2013-11-11 19:46 ` p. stephen w
2013-11-11 19:50 ` Guenter Roeck
` (35 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: p. stephen w @ 2013-11-11 19:46 UTC (permalink / raw)
To: lm-sensors
it seems after reboot, I've lost the sensors. To get them back I have to
run modprobe again.
On Mon, Nov 11, 2013 at 11:17 AM, p. stephen w <p.stephenwille@gmail.com>wrote:
> Thanks, but I'd still like to contribute. I know this stuff takes time
> and energy.
>
>
> On Mon, Nov 11, 2013 at 11:11 AM, Guenter Roeck <linux@roeck-us.net>wrote:
>
>> On Mon, Nov 11, 2013 at 10:31:40AM -0800, p. stephen w wrote:
>> > woot-woot, that was it. Running Make install did the trick. Like I
>> said,
>> > I'm a Linux noob.
>> >
>> > Where can I send you $50?
>> >
>> That was free of charge ...
>>
>> Guenter
>>
>> >
>> > On Mon, Nov 11, 2013 at 10:29 AM, Guenter Roeck <linux@roeck-us.net>
>> wrote:
>> >
>> > > On Mon, Nov 11, 2013 at 10:17:00AM -0800, p. stephen w wrote:
>> > > > I just followed the link from the lm-sensors devices page to the
>> GitHub
>> > > > page (is that yours?), and re-cloned it. This time the output was a
>> > > little
>> > > > different, and I have a few .ko files in my personal directory.
>> They are
>> > > > not in the hwmon dir. I thought I might try moving them there and
>> > > > re-running sensors-detect.
>> > > >
>> > > > Githum repo:
>> > > > https://github.com/groeck/nct6775.git
>> > > >
>> > > > Make:
>> > > > Mint nct6775 # make all
>> > > > CC [M] /home/stephen/nct6775/nct6775.o
>> > > >
>> > > > Building modules, stage 2.
>> > > > MODPOST 1 modules
>> > > > CC /home/stephen/nct6775/nct6775.mod.o
>> > > > LD [M] /home/stephen/nct6775/nct6775.ko
>> > > >
>> > > >
>> > > I asked earlier if you did run "make install". Looks like you didn't.
>> > >
>> > >
>> > > > Contents of home dir after make all:
>> > > > Mint nct6775 # ls
>> > > > compat.h Makefile nct6775.c nct6775.mod.o
>> README.ASRock
>> > > > LICENSE modules.order nct6775.ko nct6775.o
>> > > > lm75.h Module.symvers nct6775.mod.c README
>> > > >
>> > > >
>> > > > Sensors -v
>> > > > Mint nct6775 # sensors -v
>> > > > sensors version 3.3.4 with libsensors version 3.3.4
>> > > >
>> > > >
>> > > >
>> > > > I run everything as root.
>> > > > Should I copy any of the .ko, .o, and .c files from your driver
>> into any
>> > > > other folders?
>> > > >
>> > > Run "make install" followed by "modprobe nct6775".
>> > >
>> > > > I'm using the sensors-detect that came with the manual installation
>> of
>> > > > lm-sensors, latest version. I don't have a prog/detect, either
>> folder or
>> > > > command.
>> > >
>> > > The prog/detect directory is in the lm-sensors source, so if you
>> > > cloned lm-sensors from github or svn you should have it.
>> > >
>> > > Thanks,
>> > > Guenter
>> > >
>> > > > Just run sensors_detect from prog/detect/. I am not sure if you
>> > > actually
>> > > > installed it. If not, you just keep running the installed version.
>> > > >
>> > > > --
>> > > >
>> > > >
>> > > > _____________________________
>> > > > Stephen Wille | pstephenwille.com
>> > > > *new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
>> > > > _______________________________________________
>> > > > lm-sensors mailing list
>> > > > lm-sensors@lm-sensors.org
>> > > > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
>> > > >
>> > >
>> >
>> >
>> >
>> > --
>> >
>> >
>> > _____________________________
>> > Stephen Wille | pstephenwille.com
>> > *new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
>>
>
>
>
> --
>
>
> _____________________________
> Stephen Wille | pstephenwille.com
> *new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
>
--
_____________________________
Stephen Wille | pstephenwille.com
*new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (8 preceding siblings ...)
2013-11-11 19:46 ` p. stephen w
@ 2013-11-11 19:50 ` Guenter Roeck
2013-11-11 20:32 ` p. stephen w
` (34 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: Guenter Roeck @ 2013-11-11 19:50 UTC (permalink / raw)
To: lm-sensors
On Mon, Nov 11, 2013 at 11:46:21AM -0800, p. stephen w wrote:
> it seems after reboot, I've lost the sensors. To get them back I have to
> run modprobe again.
>
The driver doesn't auto-load. Just add nct6775 to /etc/modules.
Guenter
>
> On Mon, Nov 11, 2013 at 11:17 AM, p. stephen w <p.stephenwille@gmail.com>wrote:
>
> > Thanks, but I'd still like to contribute. I know this stuff takes time
> > and energy.
> >
> >
> > On Mon, Nov 11, 2013 at 11:11 AM, Guenter Roeck <linux@roeck-us.net>wrote:
> >
> >> On Mon, Nov 11, 2013 at 10:31:40AM -0800, p. stephen w wrote:
> >> > woot-woot, that was it. Running Make install did the trick. Like I
> >> said,
> >> > I'm a Linux noob.
> >> >
> >> > Where can I send you $50?
> >> >
> >> That was free of charge ...
> >>
> >> Guenter
> >>
> >> >
> >> > On Mon, Nov 11, 2013 at 10:29 AM, Guenter Roeck <linux@roeck-us.net>
> >> wrote:
> >> >
> >> > > On Mon, Nov 11, 2013 at 10:17:00AM -0800, p. stephen w wrote:
> >> > > > I just followed the link from the lm-sensors devices page to the
> >> GitHub
> >> > > > page (is that yours?), and re-cloned it. This time the output was a
> >> > > little
> >> > > > different, and I have a few .ko files in my personal directory.
> >> They are
> >> > > > not in the hwmon dir. I thought I might try moving them there and
> >> > > > re-running sensors-detect.
> >> > > >
> >> > > > Githum repo:
> >> > > > https://github.com/groeck/nct6775.git
> >> > > >
> >> > > > Make:
> >> > > > Mint nct6775 # make all
> >> > > > CC [M] /home/stephen/nct6775/nct6775.o
> >> > > >
> >> > > > Building modules, stage 2.
> >> > > > MODPOST 1 modules
> >> > > > CC /home/stephen/nct6775/nct6775.mod.o
> >> > > > LD [M] /home/stephen/nct6775/nct6775.ko
> >> > > >
> >> > > >
> >> > > I asked earlier if you did run "make install". Looks like you didn't.
> >> > >
> >> > >
> >> > > > Contents of home dir after make all:
> >> > > > Mint nct6775 # ls
> >> > > > compat.h Makefile nct6775.c nct6775.mod.o
> >> README.ASRock
> >> > > > LICENSE modules.order nct6775.ko nct6775.o
> >> > > > lm75.h Module.symvers nct6775.mod.c README
> >> > > >
> >> > > >
> >> > > > Sensors -v
> >> > > > Mint nct6775 # sensors -v
> >> > > > sensors version 3.3.4 with libsensors version 3.3.4
> >> > > >
> >> > > >
> >> > > >
> >> > > > I run everything as root.
> >> > > > Should I copy any of the .ko, .o, and .c files from your driver
> >> into any
> >> > > > other folders?
> >> > > >
> >> > > Run "make install" followed by "modprobe nct6775".
> >> > >
> >> > > > I'm using the sensors-detect that came with the manual installation
> >> of
> >> > > > lm-sensors, latest version. I don't have a prog/detect, either
> >> folder or
> >> > > > command.
> >> > >
> >> > > The prog/detect directory is in the lm-sensors source, so if you
> >> > > cloned lm-sensors from github or svn you should have it.
> >> > >
> >> > > Thanks,
> >> > > Guenter
> >> > >
> >> > > > Just run sensors_detect from prog/detect/. I am not sure if you
> >> > > actually
> >> > > > installed it. If not, you just keep running the installed version.
> >> > > >
> >> > > > --
> >> > > >
> >> > > >
> >> > > > _____________________________
> >> > > > Stephen Wille | pstephenwille.com
> >> > > > *new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
> >> > > > _______________________________________________
> >> > > > lm-sensors mailing list
> >> > > > lm-sensors@lm-sensors.org
> >> > > > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
> >> > > >
> >> > >
> >> >
> >> >
> >> >
> >> > --
> >> >
> >> >
> >> > _____________________________
> >> > Stephen Wille | pstephenwille.com
> >> > *new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
> >>
> >
> >
> >
> > --
> >
> >
> > _____________________________
> > Stephen Wille | pstephenwille.com
> > *new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
> >
>
>
>
> --
>
>
> _____________________________
> Stephen Wille | pstephenwille.com
> *new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (9 preceding siblings ...)
2013-11-11 19:50 ` Guenter Roeck
@ 2013-11-11 20:32 ` p. stephen w
2013-11-11 21:22 ` Jean Delvare
` (33 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: p. stephen w @ 2013-11-11 20:32 UTC (permalink / raw)
To: lm-sensors
that worked.
I have configured the pwmconfig file, but its not affecting the fans. I
have it in /etc/fancontrol. Do I need to reference it from somewhere else?
Here's the file.
# Configuration file generated by pwmconfig, changes will be lost
INTERVAL=1
DEVPATH=hwmon1Þvices/platform/coretemp.0
hwmon3Þvices/platform/nct6775.656
DEVNAME=hwmon1=coretemp hwmon3=nct6791
FCTEMPS=hwmon3/device/pwm2=hwmon1/device/temp1_input
hwmon3/device/pwm1=hwmon1/device/temp1_input
FCFANS=hwmon3/device/pwm2=hwmon3/device/fan2_input
hwmon3/device/pwm1=hwmon3/device/fan1_input
MINTEMP=hwmon3/device/pwm2` hwmon3/device/pwm1`
MAXTEMP=hwmon3/device/pwm2` hwmon3/device/pwm1`
MINSTART=hwmon3/device/pwm2E hwmon3/device/pwm1\x150
MINSTOP=hwmon3/device/pwm2@ hwmon3/device/pwm1\x140
MINPWM=hwmon3/device/pwm2E hwmon3/device/pwm1\x150
MAXPWM=hwmon3/device/pwm2%5 hwmon3/device/pwm1%5
On Mon, Nov 11, 2013 at 11:50 AM, Guenter Roeck <linux@roeck-us.net> wrote:
> On Mon, Nov 11, 2013 at 11:46:21AM -0800, p. stephen w wrote:
> > it seems after reboot, I've lost the sensors. To get them back I have to
> > run modprobe again.
> >
> The driver doesn't auto-load. Just add nct6775 to /etc/modules.
>
> Guenter
>
> >
> > On Mon, Nov 11, 2013 at 11:17 AM, p. stephen w <p.stephenwille@gmail.com
> >wrote:
> >
> > > Thanks, but I'd still like to contribute. I know this stuff takes time
> > > and energy.
> > >
> > >
> > > On Mon, Nov 11, 2013 at 11:11 AM, Guenter Roeck <linux@roeck-us.net
> >wrote:
> > >
> > >> On Mon, Nov 11, 2013 at 10:31:40AM -0800, p. stephen w wrote:
> > >> > woot-woot, that was it. Running Make install did the trick. Like I
> > >> said,
> > >> > I'm a Linux noob.
> > >> >
> > >> > Where can I send you $50?
> > >> >
> > >> That was free of charge ...
> > >>
> > >> Guenter
> > >>
> > >> >
> > >> > On Mon, Nov 11, 2013 at 10:29 AM, Guenter Roeck <linux@roeck-us.net
> >
> > >> wrote:
> > >> >
> > >> > > On Mon, Nov 11, 2013 at 10:17:00AM -0800, p. stephen w wrote:
> > >> > > > I just followed the link from the lm-sensors devices page to
> the
> > >> GitHub
> > >> > > > page (is that yours?), and re-cloned it. This time the output
> was a
> > >> > > little
> > >> > > > different, and I have a few .ko files in my personal directory.
> > >> They are
> > >> > > > not in the hwmon dir. I thought I might try moving them there
> and
> > >> > > > re-running sensors-detect.
> > >> > > >
> > >> > > > Githum repo:
> > >> > > > https://github.com/groeck/nct6775.git
> > >> > > >
> > >> > > > Make:
> > >> > > > Mint nct6775 # make all
> > >> > > > CC [M] /home/stephen/nct6775/nct6775.o
> > >> > > >
> > >> > > > Building modules, stage 2.
> > >> > > > MODPOST 1 modules
> > >> > > > CC /home/stephen/nct6775/nct6775.mod.o
> > >> > > > LD [M] /home/stephen/nct6775/nct6775.ko
> > >> > > >
> > >> > > >
> > >> > > I asked earlier if you did run "make install". Looks like you
> didn't.
> > >> > >
> > >> > >
> > >> > > > Contents of home dir after make all:
> > >> > > > Mint nct6775 # ls
> > >> > > > compat.h Makefile nct6775.c nct6775.mod.o
> > >> README.ASRock
> > >> > > > LICENSE modules.order nct6775.ko nct6775.o
> > >> > > > lm75.h Module.symvers nct6775.mod.c README
> > >> > > >
> > >> > > >
> > >> > > > Sensors -v
> > >> > > > Mint nct6775 # sensors -v
> > >> > > > sensors version 3.3.4 with libsensors version 3.3.4
> > >> > > >
> > >> > > >
> > >> > > >
> > >> > > > I run everything as root.
> > >> > > > Should I copy any of the .ko, .o, and .c files from your driver
> > >> into any
> > >> > > > other folders?
> > >> > > >
> > >> > > Run "make install" followed by "modprobe nct6775".
> > >> > >
> > >> > > > I'm using the sensors-detect that came with the manual
> installation
> > >> of
> > >> > > > lm-sensors, latest version. I don't have a prog/detect, either
> > >> folder or
> > >> > > > command.
> > >> > >
> > >> > > The prog/detect directory is in the lm-sensors source, so if you
> > >> > > cloned lm-sensors from github or svn you should have it.
> > >> > >
> > >> > > Thanks,
> > >> > > Guenter
> > >> > >
> > >> > > > Just run sensors_detect from prog/detect/. I am not sure if
> you
> > >> > > actually
> > >> > > > installed it. If not, you just keep running the installed
> version.
> > >> > > >
> > >> > > > --
> > >> > > >
> > >> > > >
> > >> > > > _____________________________
> > >> > > > Stephen Wille | pstephenwille.com
> > >> > > > *new address p.stephenwille@gmail.com <p.stephenwille@gmail.com
> >*
> > >> > > > _______________________________________________
> > >> > > > lm-sensors mailing list
> > >> > > > lm-sensors@lm-sensors.org
> > >> > > > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
> > >> > > >
> > >> > >
> > >> >
> > >> >
> > >> >
> > >> > --
> > >> >
> > >> >
> > >> > _____________________________
> > >> > Stephen Wille | pstephenwille.com
> > >> > *new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
> > >>
> > >
> > >
> > >
> > > --
> > >
> > >
> > > _____________________________
> > > Stephen Wille | pstephenwille.com
> > > *new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
> > >
> >
> >
> >
> > --
> >
> >
> > _____________________________
> > Stephen Wille | pstephenwille.com
> > *new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
>
--
_____________________________
Stephen Wille | pstephenwille.com
*new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (10 preceding siblings ...)
2013-11-11 20:32 ` p. stephen w
@ 2013-11-11 21:22 ` Jean Delvare
2013-11-11 22:00 ` Guenter Roeck
` (32 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: Jean Delvare @ 2013-11-11 21:22 UTC (permalink / raw)
To: lm-sensors
On Mon, 11 Nov 2013 12:32:24 -0800, p. stephen w wrote:
> that worked.
>
> I have configured the pwmconfig file, but its not affecting the fans. I
> have it in /etc/fancontrol. Do I need to reference it from somewhere else?
> Here's the file.
>
>
> # Configuration file generated by pwmconfig, changes will be lost
> INTERVAL=1
> DEVPATH=hwmon1Þvices/platform/coretemp.0
> hwmon3Þvices/platform/nct6775.656
> DEVNAME=hwmon1=coretemp hwmon3=nct6791
> FCTEMPS=hwmon3/device/pwm2=hwmon1/device/temp1_input
> hwmon3/device/pwm1=hwmon1/device/temp1_input
> FCFANS=hwmon3/device/pwm2=hwmon3/device/fan2_input
> hwmon3/device/pwm1=hwmon3/device/fan1_input
> MINTEMP=hwmon3/device/pwm2` hwmon3/device/pwm1`
> MAXTEMP=hwmon3/device/pwm2` hwmon3/device/pwm1`
> MINSTART=hwmon3/device/pwm2E hwmon3/device/pwm1\x150
> MINSTOP=hwmon3/device/pwm2@ hwmon3/device/pwm1\x140
> MINPWM=hwmon3/device/pwm2E hwmon3/device/pwm1\x150
> MAXPWM=hwmon3/device/pwm2%5 hwmon3/device/pwm1%5
Do you have the fancontrol daemon running?
# ps -ef | grep fancontrol
I don't know how your distribution integrates is, you may have to
enable some service for it to start at boot time.
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (11 preceding siblings ...)
2013-11-11 21:22 ` Jean Delvare
@ 2013-11-11 22:00 ` Guenter Roeck
2013-11-11 22:45 ` p. stephen w
` (31 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: Guenter Roeck @ 2013-11-11 22:00 UTC (permalink / raw)
To: lm-sensors
On Mon, Nov 11, 2013 at 12:32:24PM -0800, p. stephen w wrote:
> that worked.
>
> I have configured the pwmconfig file, but its not affecting the fans. I
> have it in /etc/fancontrol. Do I need to reference it from somewhere else?
> Here's the file.
>
>
> # Configuration file generated by pwmconfig, changes will be lost
> INTERVAL=1
> DEVPATH=hwmon1Þvices/platform/coretemp.0
> hwmon3Þvices/platform/nct6775.656
> DEVNAME=hwmon1=coretemp hwmon3=nct6791
> FCTEMPS=hwmon3/device/pwm2=hwmon1/device/temp1_input
> hwmon3/device/pwm1=hwmon1/device/temp1_input
> FCFANS=hwmon3/device/pwm2=hwmon3/device/fan2_input
> hwmon3/device/pwm1=hwmon3/device/fan1_input
> MINTEMP=hwmon3/device/pwm2` hwmon3/device/pwm1`
> MAXTEMP=hwmon3/device/pwm2` hwmon3/device/pwm1`
> MINSTART=hwmon3/device/pwm2E hwmon3/device/pwm1\x150
> MINSTOP=hwmon3/device/pwm2@ hwmon3/device/pwm1\x140
> MINPWM=hwmon3/device/pwm2E hwmon3/device/pwm1\x150
> MAXPWM=hwmon3/device/pwm2%5 hwmon3/device/pwm1%5
>
Can you send the output of "grep . /sys/class/hwmon/hwmon3/device/*" ?
Reason for asking is that the NCT chips are pretty good with automatic fan
control. It should not be necessary to run manual (or script based) fan control
at all, unless you need to use a temperature which is not available to the chip.
The CPU temperature is usually available.
Thanks,
Guenter
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (12 preceding siblings ...)
2013-11-11 22:00 ` Guenter Roeck
@ 2013-11-11 22:45 ` p. stephen w
2013-11-11 23:18 ` Guenter Roeck
` (30 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: p. stephen w @ 2013-11-11 22:45 UTC (permalink / raw)
To: lm-sensors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^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (13 preceding siblings ...)
2013-11-11 22:45 ` p. stephen w
@ 2013-11-11 23:18 ` Guenter Roeck
2013-11-12 0:47 ` p. stephen w
` (29 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: Guenter Roeck @ 2013-11-11 23:18 UTC (permalink / raw)
To: lm-sensors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^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (14 preceding siblings ...)
2013-11-11 23:18 ` Guenter Roeck
@ 2013-11-12 0:47 ` p. stephen w
2013-11-12 0:57 ` p. stephen w
` (28 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: p. stephen w @ 2013-11-12 0:47 UTC (permalink / raw)
To: lm-sensors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^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (15 preceding siblings ...)
2013-11-12 0:47 ` p. stephen w
@ 2013-11-12 0:57 ` p. stephen w
2013-11-12 2:37 ` Guenter Roeck
` (27 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: p. stephen w @ 2013-11-12 0:57 UTC (permalink / raw)
To: lm-sensors
[-- Attachment #1: Type: text/plain, Size: 1677 bytes --]
Please see attached.
_____________________________________________________________________________________________
I noticed the fancontrol file is using hwmon2, instead of hwmon3, so I ran
that command using hwmon2 and it has a lot more output. I've attached it
in case its of interest.
Can I set INTERVAL to less than a minute; 0.25, or 0.5?
etc/fantcontrol
INTERVAL=1
DEVICEPATH=hwmon1=devices/platform/coretemp.0
hwmon2=devices/platform/nct6775.656
DEVNAME=hwmon1=coretemp hwmon2=nct6791
FCTEMPS=hwmon2/device/pwm2=hwmon1/device/temp1_input
FCFANS= hwmon2/device/pwm2=hwmon2/device/fan2_input
MINTEMP=hwmon2/device/pwm2=60
MAXTEMP=hwmon2/device/pwm2=61
MINSTART=hwmon2/device/pwm2=150
MINSTOP=hwmon2/device/pwm2=0
MAXPWM=hwmon2/device/pwm2=255
On Sun, Nov 10, 2013 at 9:25 PM, p. stephen w <p.stephenwille@gmail.com>wrote:
> Hey guys,
> I'd be happy to contribute $50 to get this chip supported via
> sensors-detect. The weekends over, and I have not been able to get it
> installed as a stand alone driver from the GitHub repo. I have some Apache
> experience, but am clueless about Linux; I'm running the latest Mint
> distro. I'm sure there's a way, but I don't know it.
>
> If its of interest, this is for an Asus Z87i-Deluxe board. Yes, its
> OC'd, which is why I need the PWM control.
>
>
>
> Keep up the good work.
>
>
> _____________________________
> Stephen Wille | pstephenwille.com
> *new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
>
--
_____________________________
Stephen Wille | pstephenwille.com
*new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
[-- Attachment #2: hwmon2.txt --]
[-- Type: text/plain, Size: 14827 bytes --]
/sys/class/hwmon/hwmon2/device/beep_enable:0
/sys/class/hwmon/hwmon2/device/fan1_alarm:0
/sys/class/hwmon/hwmon2/device/fan1_beep:0
/sys/class/hwmon/hwmon2/device/fan1_input:897
/sys/class/hwmon/hwmon2/device/fan1_min:0
/sys/class/hwmon/hwmon2/device/fan1_pulses:2
/sys/class/hwmon/hwmon2/device/fan1_target:0
/sys/class/hwmon/hwmon2/device/fan1_tolerance:0
/sys/class/hwmon/hwmon2/device/fan2_alarm:0
/sys/class/hwmon/hwmon2/device/fan2_beep:0
/sys/class/hwmon/hwmon2/device/fan2_input:1221
/sys/class/hwmon/hwmon2/device/fan2_min:0
/sys/class/hwmon/hwmon2/device/fan2_pulses:2
/sys/class/hwmon/hwmon2/device/fan2_target:27000
/sys/class/hwmon/hwmon2/device/fan2_tolerance:0
/sys/class/hwmon/hwmon2/device/fan3_alarm:0
/sys/class/hwmon/hwmon2/device/fan3_beep:0
/sys/class/hwmon/hwmon2/device/fan3_input:0
/sys/class/hwmon/hwmon2/device/fan3_min:0
/sys/class/hwmon/hwmon2/device/fan3_pulses:2
/sys/class/hwmon/hwmon2/device/fan3_target:0
/sys/class/hwmon/hwmon2/device/fan3_tolerance:0
/sys/class/hwmon/hwmon2/device/fan4_alarm:0
/sys/class/hwmon/hwmon2/device/fan4_beep:0
/sys/class/hwmon/hwmon2/device/fan4_input:0
/sys/class/hwmon/hwmon2/device/fan4_min:0
/sys/class/hwmon/hwmon2/device/fan4_pulses:2
/sys/class/hwmon/hwmon2/device/fan4_target:0
/sys/class/hwmon/hwmon2/device/fan4_tolerance:0
/sys/class/hwmon/hwmon2/device/fan5_alarm:0
/sys/class/hwmon/hwmon2/device/fan5_beep:0
/sys/class/hwmon/hwmon2/device/fan5_input:0
/sys/class/hwmon/hwmon2/device/fan5_min:0
/sys/class/hwmon/hwmon2/device/fan5_pulses:2
/sys/class/hwmon/hwmon2/device/fan5_target:0
/sys/class/hwmon/hwmon2/device/fan5_tolerance:0
/sys/class/hwmon/hwmon2/device/in0_alarm:0
/sys/class/hwmon/hwmon2/device/in0_beep:0
/sys/class/hwmon/hwmon2/device/in0_input:928
/sys/class/hwmon/hwmon2/device/in0_max:1744
/sys/class/hwmon/hwmon2/device/in0_min:0
/sys/class/hwmon/hwmon2/device/in10_alarm:1
/sys/class/hwmon/hwmon2/device/in10_beep:0
/sys/class/hwmon/hwmon2/device/in10_input:184
/sys/class/hwmon/hwmon2/device/in10_max:0
/sys/class/hwmon/hwmon2/device/in10_min:0
/sys/class/hwmon/hwmon2/device/in11_alarm:1
/sys/class/hwmon/hwmon2/device/in11_beep:0
/sys/class/hwmon/hwmon2/device/in11_input:168
/sys/class/hwmon/hwmon2/device/in11_max:0
/sys/class/hwmon/hwmon2/device/in11_min:0
/sys/class/hwmon/hwmon2/device/in12_alarm:1
/sys/class/hwmon/hwmon2/device/in12_beep:0
/sys/class/hwmon/hwmon2/device/in12_input:152
/sys/class/hwmon/hwmon2/device/in12_max:0
/sys/class/hwmon/hwmon2/device/in12_min:0
/sys/class/hwmon/hwmon2/device/in13_alarm:1
/sys/class/hwmon/hwmon2/device/in13_beep:0
/sys/class/hwmon/hwmon2/device/in13_input:152
/sys/class/hwmon/hwmon2/device/in13_max:0
/sys/class/hwmon/hwmon2/device/in13_min:0
/sys/class/hwmon/hwmon2/device/in14_alarm:1
/sys/class/hwmon/hwmon2/device/in14_beep:0
/sys/class/hwmon/hwmon2/device/in14_input:160
/sys/class/hwmon/hwmon2/device/in14_max:0
/sys/class/hwmon/hwmon2/device/in14_min:0
/sys/class/hwmon/hwmon2/device/in1_alarm:1
/sys/class/hwmon/hwmon2/device/in1_beep:0
/sys/class/hwmon/hwmon2/device/in1_input:984
/sys/class/hwmon/hwmon2/device/in1_max:0
/sys/class/hwmon/hwmon2/device/in1_min:0
/sys/class/hwmon/hwmon2/device/in2_alarm:1
/sys/class/hwmon/hwmon2/device/in2_beep:0
/sys/class/hwmon/hwmon2/device/in2_input:3312
/sys/class/hwmon/hwmon2/device/in2_max:0
/sys/class/hwmon/hwmon2/device/in2_min:0
/sys/class/hwmon/hwmon2/device/in3_alarm:1
/sys/class/hwmon/hwmon2/device/in3_beep:0
/sys/class/hwmon/hwmon2/device/in3_input:3312
/sys/class/hwmon/hwmon2/device/in3_max:0
/sys/class/hwmon/hwmon2/device/in3_min:0
/sys/class/hwmon/hwmon2/device/in4_alarm:1
/sys/class/hwmon/hwmon2/device/in4_beep:0
/sys/class/hwmon/hwmon2/device/in4_input:1008
/sys/class/hwmon/hwmon2/device/in4_max:0
/sys/class/hwmon/hwmon2/device/in4_min:0
/sys/class/hwmon/hwmon2/device/in5_alarm:1
/sys/class/hwmon/hwmon2/device/in5_beep:0
/sys/class/hwmon/hwmon2/device/in5_input:184
/sys/class/hwmon/hwmon2/device/in5_max:0
/sys/class/hwmon/hwmon2/device/in5_min:0
/sys/class/hwmon/hwmon2/device/in6_alarm:1
/sys/class/hwmon/hwmon2/device/in6_beep:0
/sys/class/hwmon/hwmon2/device/in6_input:936
/sys/class/hwmon/hwmon2/device/in6_max:0
/sys/class/hwmon/hwmon2/device/in6_min:0
/sys/class/hwmon/hwmon2/device/in7_alarm:1
/sys/class/hwmon/hwmon2/device/in7_beep:0
/sys/class/hwmon/hwmon2/device/in7_input:3232
/sys/class/hwmon/hwmon2/device/in7_max:0
/sys/class/hwmon/hwmon2/device/in7_min:0
/sys/class/hwmon/hwmon2/device/in8_alarm:1
/sys/class/hwmon/hwmon2/device/in8_beep:0
/sys/class/hwmon/hwmon2/device/in8_input:3264
/sys/class/hwmon/hwmon2/device/in8_max:0
/sys/class/hwmon/hwmon2/device/in8_min:0
/sys/class/hwmon/hwmon2/device/in9_alarm:1
/sys/class/hwmon/hwmon2/device/in9_beep:0
/sys/class/hwmon/hwmon2/device/in9_input:1104
/sys/class/hwmon/hwmon2/device/in9_max:0
/sys/class/hwmon/hwmon2/device/in9_min:0
/sys/class/hwmon/hwmon2/device/intrusion0_alarm:1
/sys/class/hwmon/hwmon2/device/intrusion0_beep:0
/sys/class/hwmon/hwmon2/device/intrusion1_alarm:1
/sys/class/hwmon/hwmon2/device/intrusion1_beep:0
/sys/class/hwmon/hwmon2/device/modalias:platform:nct6775
/sys/class/hwmon/hwmon2/device/name:nct6791
/sys/class/hwmon/hwmon2/device/pwm1:157
/sys/class/hwmon/hwmon2/device/pwm1_auto_point1_pwm:153
/sys/class/hwmon/hwmon2/device/pwm1_auto_point1_temp:30000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point2_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point2_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm1_enable:5
/sys/class/hwmon/hwmon2/device/pwm1_floor:1
/sys/class/hwmon/hwmon2/device/pwm1_mode:1
/sys/class/hwmon/hwmon2/device/pwm1_start:1
/sys/class/hwmon/hwmon2/device/pwm1_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm1_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm1_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm1_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm1_temp_sel:0
/sys/class/hwmon/hwmon2/device/pwm1_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm1_weight_duty_base:255
/sys/class/hwmon/hwmon2/device/pwm1_weight_duty_step:255
/sys/class/hwmon/hwmon2/device/pwm1_weight_temp_sel:0
/sys/class/hwmon/hwmon2/device/pwm1_weight_temp_step:255000
/sys/class/hwmon/hwmon2/device/pwm1_weight_temp_step_base:255000
/sys/class/hwmon/hwmon2/device/pwm1_weight_temp_step_tol:255000
/sys/class/hwmon/hwmon2/device/pwm2:0
/sys/class/hwmon/hwmon2/device/pwm2_auto_point1_pwm:51
/sys/class/hwmon/hwmon2/device/pwm2_auto_point1_temp:20000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point2_pwm:178
/sys/class/hwmon/hwmon2/device/pwm2_auto_point2_temp:70000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm2_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm2_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm2_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm2_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm2_enable:1
/sys/class/hwmon/hwmon2/device/pwm2_floor:1
/sys/class/hwmon/hwmon2/device/pwm2_mode:1
/sys/class/hwmon/hwmon2/device/pwm2_start:1
/sys/class/hwmon/hwmon2/device/pwm2_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm2_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm2_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm2_target_temp:50000
/sys/class/hwmon/hwmon2/device/pwm2_temp_sel:0
/sys/class/hwmon/hwmon2/device/pwm2_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_duty_base:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_duty_step:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_sel:1
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_step:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_step_base:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_step_tol:0
/sys/class/hwmon/hwmon2/device/pwm3:157
/sys/class/hwmon/hwmon2/device/pwm3_auto_point1_pwm:153
/sys/class/hwmon/hwmon2/device/pwm3_auto_point1_temp:30000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point2_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point2_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm3_enable:5
/sys/class/hwmon/hwmon2/device/pwm3_floor:1
/sys/class/hwmon/hwmon2/device/pwm3_mode:1
/sys/class/hwmon/hwmon2/device/pwm3_start:1
/sys/class/hwmon/hwmon2/device/pwm3_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm3_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm3_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm3_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm3_temp_sel:0
/sys/class/hwmon/hwmon2/device/pwm3_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm3_weight_duty_base:255
/sys/class/hwmon/hwmon2/device/pwm3_weight_duty_step:255
/sys/class/hwmon/hwmon2/device/pwm3_weight_temp_sel:0
/sys/class/hwmon/hwmon2/device/pwm3_weight_temp_step:255000
/sys/class/hwmon/hwmon2/device/pwm3_weight_temp_step_base:255000
/sys/class/hwmon/hwmon2/device/pwm3_weight_temp_step_tol:255000
/sys/class/hwmon/hwmon2/device/pwm4:157
/sys/class/hwmon/hwmon2/device/pwm4_auto_point1_pwm:153
/sys/class/hwmon/hwmon2/device/pwm4_auto_point1_temp:30000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point2_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point2_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm4_enable:5
/sys/class/hwmon/hwmon2/device/pwm4_floor:1
/sys/class/hwmon/hwmon2/device/pwm4_mode:1
/sys/class/hwmon/hwmon2/device/pwm4_start:1
/sys/class/hwmon/hwmon2/device/pwm4_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm4_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm4_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm4_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm4_temp_sel:0
/sys/class/hwmon/hwmon2/device/pwm4_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm4_weight_duty_base:255
/sys/class/hwmon/hwmon2/device/pwm4_weight_duty_step:255
/sys/class/hwmon/hwmon2/device/pwm4_weight_temp_sel:0
/sys/class/hwmon/hwmon2/device/pwm4_weight_temp_step:255000
/sys/class/hwmon/hwmon2/device/pwm4_weight_temp_step_base:255000
/sys/class/hwmon/hwmon2/device/pwm4_weight_temp_step_tol:255000
/sys/class/hwmon/hwmon2/device/pwm5:255
/sys/class/hwmon/hwmon2/device/pwm5_auto_point1_pwm:140
/sys/class/hwmon/hwmon2/device/pwm5_auto_point1_temp:25000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point2_pwm:170
/sys/class/hwmon/hwmon2/device/pwm5_auto_point2_temp:35000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point3_pwm:200
/sys/class/hwmon/hwmon2/device/pwm5_auto_point3_temp:45000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point4_pwm:230
/sys/class/hwmon/hwmon2/device/pwm5_auto_point4_temp:55000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm5_auto_point5_temp:60000
/sys/class/hwmon/hwmon2/device/pwm5_crit_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm5_enable:0
/sys/class/hwmon/hwmon2/device/pwm5_floor:1
/sys/class/hwmon/hwmon2/device/pwm5_mode:1
/sys/class/hwmon/hwmon2/device/pwm5_start:1
/sys/class/hwmon/hwmon2/device/pwm5_step_down_time:1000
/sys/class/hwmon/hwmon2/device/pwm5_step_up_time:1000
/sys/class/hwmon/hwmon2/device/pwm5_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm5_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm5_temp_sel:3
/sys/class/hwmon/hwmon2/device/pwm5_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm5_weight_duty_base:255
/sys/class/hwmon/hwmon2/device/pwm5_weight_duty_step:255
/sys/class/hwmon/hwmon2/device/pwm5_weight_temp_sel:0
/sys/class/hwmon/hwmon2/device/pwm5_weight_temp_step:255000
/sys/class/hwmon/hwmon2/device/pwm5_weight_temp_step_base:255000
/sys/class/hwmon/hwmon2/device/pwm5_weight_temp_step_tol:255000
/sys/class/hwmon/hwmon2/device/temp10_input:0
/sys/class/hwmon/hwmon2/device/temp10_label:PCH_MCH_TEMP
/sys/class/hwmon/hwmon2/device/temp1_input:109000
/sys/class/hwmon/hwmon2/device/temp1_label:SYSTIN
/sys/class/hwmon/hwmon2/device/temp1_max:0
/sys/class/hwmon/hwmon2/device/temp1_max_hyst:0
/sys/class/hwmon/hwmon2/device/temp1_offset:0
/sys/class/hwmon/hwmon2/device/temp1_type:4
/sys/class/hwmon/hwmon2/device/temp2_alarm:0
/sys/class/hwmon/hwmon2/device/temp2_beep:0
/sys/class/hwmon/hwmon2/device/temp2_input:31000
/sys/class/hwmon/hwmon2/device/temp2_label:CPUTIN
/sys/class/hwmon/hwmon2/device/temp2_max:80000
/sys/class/hwmon/hwmon2/device/temp2_max_hyst:75000
/sys/class/hwmon/hwmon2/device/temp2_offset:0
/sys/class/hwmon/hwmon2/device/temp2_type:4
/sys/class/hwmon/hwmon2/device/temp3_alarm:1
/sys/class/hwmon/hwmon2/device/temp3_beep:0
/sys/class/hwmon/hwmon2/device/temp3_input:29000
/sys/class/hwmon/hwmon2/device/temp3_label:AUXTIN0
/sys/class/hwmon/hwmon2/device/temp3_max:0
/sys/class/hwmon/hwmon2/device/temp3_max_hyst:0
/sys/class/hwmon/hwmon2/device/temp3_offset:0
/sys/class/hwmon/hwmon2/device/temp3_type:4
/sys/class/hwmon/hwmon2/device/temp4_input:101000
/sys/class/hwmon/hwmon2/device/temp4_label:AUXTIN1
/sys/class/hwmon/hwmon2/device/temp4_offset:0
/sys/class/hwmon/hwmon2/device/temp4_type:4
/sys/class/hwmon/hwmon2/device/temp5_input:101000
/sys/class/hwmon/hwmon2/device/temp5_label:AUXTIN2
/sys/class/hwmon/hwmon2/device/temp5_offset:0
/sys/class/hwmon/hwmon2/device/temp5_type:4
/sys/class/hwmon/hwmon2/device/temp6_input:100000
/sys/class/hwmon/hwmon2/device/temp6_label:AUXTIN3
/sys/class/hwmon/hwmon2/device/temp6_offset:0
/sys/class/hwmon/hwmon2/device/temp6_type:4
/sys/class/hwmon/hwmon2/device/temp7_input:0
/sys/class/hwmon/hwmon2/device/temp7_label:PCH_CHIP_CPU_MAX_TEMP
/sys/class/hwmon/hwmon2/device/temp8_input:0
/sys/class/hwmon/hwmon2/device/temp8_label:PCH_CHIP_TEMP
/sys/class/hwmon/hwmon2/device/temp9_input:0
/sys/class/hwmon/hwmon2/device/temp9_label:PCH_CPU_TEMP
/sys/class/hwmon/hwmon2/device/uevent:DRIVER=nct6775
/sys/class/hwmon/hwmon2/device/uevent:MODALIAS=platform:nct6775
[-- Attachment #3: Type: text/plain, Size: 153 bytes --]
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (16 preceding siblings ...)
2013-11-12 0:57 ` p. stephen w
@ 2013-11-12 2:37 ` Guenter Roeck
2013-11-12 3:24 ` p. stephen w
` (26 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: Guenter Roeck @ 2013-11-12 2:37 UTC (permalink / raw)
To: lm-sensors
On 11/11/2013 04:57 PM, p. stephen w wrote:
> Please see attached.
> _____________________________________________________________________________________________
> I noticed the fancontrol file is using hwmon2, instead of hwmon3, so I ran
> that command using hwmon2 and it has a lot more output. I've attached it
> in case its of interest.
> Can I set INTERVAL to less than a minute; 0.25, or 0.5?
>
No idea.
> etc/fantcontrol
> INTERVAL=1
> DEVICEPATH=hwmon1Þvices/platform/coretemp.0
> hwmon2Þvices/platform/nct6775.656
> DEVNAME=hwmon1=coretemp hwmon2=nct6791
> FCTEMPS=hwmon2/device/pwm2=hwmon1/device/temp1_input
> FCFANS= hwmon2/device/pwm2=hwmon2/device/fan2_input
> MINTEMP=hwmon2/device/pwm2`
> MAXTEMP=hwmon2/device/pwm2a
> MINSTART=hwmon2/device/pwm2\x150
> MINSTOP=hwmon2/device/pwm2=0
> MAXPWM=hwmon2/device/pwm2%5
>
Yes, obviously the nct6775 driver is hwmon2. No idea why the eee driver (hwmon3)
is instantiated.
Can we take a step back on why you think you need to run fancontrol ...
you mentioned earlier that the board was "OC'd". I assume that means overclocked.
Why can't you use the automatic fan control provided by the NCT chip ?
That would provide much better reaction time to temperature changes.
Also, I think something may be wrong in the driver when it comes to associating
temperature sources with pwm controls. Specifically, the pwmX_temp_sel values
should not return 0. I'll have to look into that.
Thanks,
Guenter
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (17 preceding siblings ...)
2013-11-12 2:37 ` Guenter Roeck
@ 2013-11-12 3:24 ` p. stephen w
2013-11-12 4:05 ` Guenter Roeck
` (25 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: p. stephen w @ 2013-11-12 3:24 UTC (permalink / raw)
To: lm-sensors
The control provided by the NCT chip would be the BIOS control?
My main concern is noise and the BIOS PWM control was still too noisy.
Plus it seemed to respond to CPU load rather then temp. The slightest load
ramped up the audible level, then back down as it went to idle. The result
was a noisy computer that sounded like it was breathing. My thinking was
that I needed some kind of PWM control with greater range like I got from
Asus AI 3 utility. This meant controlling it from the OS, and that's how I
got to lm-sensors and fancontrol. It is overclocked (OC'd), but spends
most of its time idling as it only runs as a web server. The benefit of
the OC is seen when running windows because then it becomes my development
machine, when on the job. When its running Linux I'm not concerned about
temps.
Re: temp sources being associated, I did notice what looked like an error.
Sometimes running PWMCONFIG, the file would show an assignment of
fan1_input to pwm2, which is incorrect. I would confirm the association
from the pwmconfig output, and correct the file, which was fan1_input
controlled by pwm1, and fan2_input controlled by pwm2. One last item, and
this is likely due to trying to use pwmconfig on the 4pin voltage
controlled fan (thanks Asus), but sometimes the config file would be
incomplete when assigning two sources. Sometimes after running through the
pwmcofig it would produce this:
FCTEMPS=hwmon3/device/pwm2=hwmon1/device/temp1_input hwmon3/device/pwm1
OR....
FCFANS=hwmon3/device/pwm2=hwmon3/device/fan2_input hwmon3/device/pwm1
What's missing is the last assignment, either temp1_input, or fan1_input.
I'd be happy to re-run the pwmconfig to reproduce this, if it would help.
On Mon, Nov 11, 2013 at 6:37 PM, Guenter Roeck <linux@roeck-us.net> wrote:
> On 11/11/2013 04:57 PM, p. stephen w wrote:
>
>> Please see attached.
>> ____________________________________________________________
>> _________________________________
>> I noticed the fancontrol file is using hwmon2, instead of hwmon3, so I ran
>> that command using hwmon2 and it has a lot more output. I've attached it
>> in case its of interest.
>> Can I set INTERVAL to less than a minute; 0.25, or 0.5?
>>
>> No idea.
>
>
> etc/fantcontrol
>> INTERVAL=1
>> DEVICEPATH=hwmon1Þvices/platform/coretemp.0
>> hwmon2Þvices/platform/nct6775.656
>> DEVNAME=hwmon1=coretemp hwmon2=nct6791
>> FCTEMPS=hwmon2/device/pwm2=hwmon1/device/temp1_input
>> FCFANS= hwmon2/device/pwm2=hwmon2/device/fan2_input
>> MINTEMP=hwmon2/device/pwm2`
>> MAXTEMP=hwmon2/device/pwm2a
>> MINSTART=hwmon2/device/pwm2\x150
>> MINSTOP=hwmon2/device/pwm2=0
>> MAXPWM=hwmon2/device/pwm2%5
>>
>>
> Yes, obviously the nct6775 driver is hwmon2. No idea why the eee driver
> (hwmon3)
> is instantiated.
>
> Can we take a step back on why you think you need to run fancontrol ...
> you mentioned earlier that the board was "OC'd". I assume that means
> overclocked.
> Why can't you use the automatic fan control provided by the NCT chip ?
> That would provide much better reaction time to temperature changes.
>
> Also, I think something may be wrong in the driver when it comes to
> associating
> temperature sources with pwm controls. Specifically, the pwmX_temp_sel
> values
> should not return 0. I'll have to look into that.
>
> Thanks,
> Guenter
>
>
--
_____________________________
Stephen Wille | pstephenwille.com
*new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (18 preceding siblings ...)
2013-11-12 3:24 ` p. stephen w
@ 2013-11-12 4:05 ` Guenter Roeck
2013-11-12 5:22 ` Guenter Roeck
` (24 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: Guenter Roeck @ 2013-11-12 4:05 UTC (permalink / raw)
To: lm-sensors
On 11/11/2013 07:24 PM, p. stephen w wrote:
> The control provided by the NCT chip would be the BIOS control?
No, that is handled by the NCT chip internally. The BIOS just sets the values
in the chip.
> My main concern is noise and the BIOS PWM control was still too noisy. Plus it seemed to respond to CPU load rather then temp. The slightest load ramped up the audible level, then back down as it went to idle. The result was a noisy computer that sounded like it was breathing. My thinking was that I needed some kind of PWM control with greater range like I got from Asus AI 3 utility. This meant controlling it from the OS, and that's how I got to lm-sensors and fancontrol. It is overclocked (OC'd), but spends most of its time idling as it only runs as a web server. The benefit of the OC is seen when running windows because then it becomes my development machine, when on the job. When its running Linux I'm not concerned about temps.
>
No, it is the CPU temperature which can increase substantially within a few seconds.
You can select the ramp with
/sys/class/hwmon/hwmon2/device/pwm2_auto_point1_pwm:51
/sys/class/hwmon/hwmon2/device/pwm2_auto_point1_temp:20000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point2_pwm:178
/sys/class/hwmon/hwmon2/device/pwm2_auto_point2_temp:70000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm2_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm2_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm2_auto_point5_temp:75000
The above reall defines the ramp. pwmQ at 20 degrees C, then 178 at 70 degrees C
and 255 (full speed) at 75 degrees C.
In one of my systems with nct6776, the configuration looks as follows:
pwm2_auto_point1_pwm:51
pwm2_auto_point1_temp:70000
pwm2_auto_point2_pwm:102
pwm2_auto_point2_temp:79000
pwm2_auto_point3_pwm:154
pwm2_auto_point3_temp:82000
pwm2_auto_point4_pwm:255
pwm2_auto_point4_temp:85000
pwm2_auto_point5_pwm:255
pwm2_auto_point5_temp:90000
This results in a much more gradual increase. The CPU's high temperature in this case
is 85 degrees C (this is the 'high' temperature you see from coretemp), and the critical
temperature is 105 degrees C (i7-3770K).
Another example from another system (with nct6775):
pwm2_auto_point1_pwm:51
pwm2_auto_point1_temp:1000
pwm2_auto_point2_pwm:51
pwm2_auto_point2_temp:70000
pwm2_auto_point3_pwm:51
pwm2_auto_point3_temp:70000
pwm2_auto_point4_pwm:102
pwm2_auto_point4_temp:79000
pwm2_auto_point5_pwm:154
pwm2_auto_point5_temp:82000
pwm2_auto_point6_pwm:255
pwm2_auto_point6_temp:85000
pwm2_auto_point7_pwm:255
pwm2_auto_point7_temp:93000
This is with a high temp of 80 degrees C and critical temp of 98 degrees C (i7-2600).
As you can see, the increase is much more gradual in both cases.
In your case, the high temperature is 80 degrees C, so you'll want full speed at 85 degrees
or less. If you want to run your system at low noise, the second set of parameters
(which sets the max fan speed at 85 degrees C) might make sense. Obviously you'd have
to shift auto_pointX down by two as you only have five data points in your system.
You could start with something like
pwm2_auto_point1_pwm:51
pwm2_auto_point1_temp:70000
pwm2_auto_point2_pwm:102
pwm2_auto_point2_temp:79000
pwm2_auto_point3_pwm:154
pwm2_auto_point3_temp:82000
pwm2_auto_point4_pwm:255
pwm2_auto_point4_temp:85000
pwm2_auto_point5_pwm:255
pwm2_auto_point5_temp:93000
You would have to set pwm2_enable to 5 to activate automatic fan control with those settings
(after writing the above values).
> Re: temp sources being associated, I did notice what looked like an error. Sometimes running PWMCONFIG, the file would show an assignment of fan1_input to pwm2, which is incorrect. I would confirm the association from the pwmconfig output, and correct the file, which was fan1_input controlled by pwm1, and fan2_input controlled by pwm2. One last item, and this is likely due to trying to use pwmconfig on the 4pin voltage controlled fan (thanks Asus), but sometimes the config file would be incomplete when assigning two sources. Sometimes after running through the pwmcofig it would produce this:
>
>
> FCTEMPS=hwmon3/device/pwm2=hwmon1/device/temp1_input hwmon3/device/pwm1>
> OR....
> FCFANS=hwmon3/device/pwm2=hwmon3/device/fan2_input hwmon3/device/pwm1>
> What's missing is the last assignment, either temp1_input, or fan1_input.
>
That looks more like a bug in the script generating the file.
What I referred to is pwmX_temp_sel which should not be 0.
>
> I'd be happy to re-run the pwmconfig to reproduce this, if it would help.
>
No, it won't. I'll dig out other commands for you to run to give me some chip
register output.
Guenter
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (19 preceding siblings ...)
2013-11-12 4:05 ` Guenter Roeck
@ 2013-11-12 5:22 ` Guenter Roeck
2013-11-12 6:25 ` p. stephen w
` (23 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: Guenter Roeck @ 2013-11-12 5:22 UTC (permalink / raw)
To: lm-sensors
On Mon, Nov 11, 2013 at 08:05:46PM -0800, Guenter Roeck wrote:
[ ... ]
> No, it won't. I'll dig out other commands for you to run to give me some chip
> register output.
>
Following up on this. It would be great if you can do the following.
When executing the the sensors command, you see something like
nct6791-isa-0a00
for the NCT chip. Take the hex number at the end; based on it, run the
following sequence of commands:
sudo isadump -k 0x55,0x55 0xa05 0xa06
sudo isadump -k 0x55,0x55 0xa05 0xa06 1
sudo isadump -k 0x55,0x55 0xa05 0xa06 2
sudo isadump -k 0x55,0x55 0xa05 0xa06 3
sudo isadump -k 0x55,0x55 0xa05 0xa06 4
sudo isadump -k 0x55,0x55 0xa05 0xa06 5
sudo isadump -k 0x55,0x55 0xa05 0xa06 6
sudo isadump -k 0x55,0x55 0xa05 0xa06 7
sudo isadump -k 0x55,0x55 0xa05 0xa06 8
In other words, add 5 and 6 to the hex number and pass it as parameter to the
isadump commands.
This should create a dump of chip registers, which would hopefully help me track
down the problem with pwmX_temp_sel.
Thanks,
Guenter
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (20 preceding siblings ...)
2013-11-12 5:22 ` Guenter Roeck
@ 2013-11-12 6:25 ` p. stephen w
2013-11-12 7:04 ` Jean Delvare
` (22 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: p. stephen w @ 2013-11-12 6:25 UTC (permalink / raw)
To: lm-sensors
Running sensors gives:
nct6791-isa-0290
Based on that the command becomes:
Mint stephen # isadump -k 0x55,0x55 0x905 0x906
Which outputs:
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
If that's correct, I'll go a head and run the rest of them.
On Mon, Nov 11, 2013 at 9:22 PM, Guenter Roeck <linux@roeck-us.net> wrote:
> On Mon, Nov 11, 2013 at 08:05:46PM -0800, Guenter Roeck wrote:
>
> [ ... ]
>
> > No, it won't. I'll dig out other commands for you to run to give me some
> chip
> > register output.
> >
> Following up on this. It would be great if you can do the following.
>
> When executing the the sensors command, you see something like
>
> nct6791-isa-0a00
>
> for the NCT chip. Take the hex number at the end; based on it, run the
> following sequence of commands:
>
> sudo isadump -k 0x55,0x55 0xa05 0xa06
> sudo isadump -k 0x55,0x55 0xa05 0xa06 1
> sudo isadump -k 0x55,0x55 0xa05 0xa06 2
> sudo isadump -k 0x55,0x55 0xa05 0xa06 3
> sudo isadump -k 0x55,0x55 0xa05 0xa06 4
> sudo isadump -k 0x55,0x55 0xa05 0xa06 5
> sudo isadump -k 0x55,0x55 0xa05 0xa06 6
> sudo isadump -k 0x55,0x55 0xa05 0xa06 7
> sudo isadump -k 0x55,0x55 0xa05 0xa06 8
>
> In other words, add 5 and 6 to the hex number and pass it as parameter to
> the
> isadump commands.
>
> This should create a dump of chip registers, which would hopefully help me
> track
> down the problem with pwmX_temp_sel.
>
> Thanks,
> Guenter
>
--
_____________________________
Stephen Wille | pstephenwille.com
*new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (21 preceding siblings ...)
2013-11-12 6:25 ` p. stephen w
@ 2013-11-12 7:04 ` Jean Delvare
2013-11-12 7:14 ` Jean Delvare
` (21 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: Jean Delvare @ 2013-11-12 7:04 UTC (permalink / raw)
To: lm-sensors
On Mon, 11 Nov 2013 18:37:37 -0800, Guenter Roeck wrote:
> On 11/11/2013 04:57 PM, p. stephen w wrote:
> > Please see attached.
> > _____________________________________________________________________________________________
> > I noticed the fancontrol file is using hwmon2, instead of hwmon3, so I ran
> > that command using hwmon2 and it has a lot more output. I've attached it
> > in case its of interest.
> > Can I set INTERVAL to less than a minute; 0.25, or 0.5?
>
> No idea.
Interval is expressed in seconds, not minutes. The default is 10
seconds, which some may find too much if the low fan speeds are very
low and temperatures can raise quickly. Lowering it is OK, but there's
no point in going below 1 second because most hwmon drivers won't
refresh their values faster than every second anyway.
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (22 preceding siblings ...)
2013-11-12 7:04 ` Jean Delvare
@ 2013-11-12 7:14 ` Jean Delvare
2013-11-12 7:27 ` p. stephen w
` (20 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: Jean Delvare @ 2013-11-12 7:14 UTC (permalink / raw)
To: lm-sensors
On Mon, 11 Nov 2013 22:25:04 -0800, p. stephen w wrote:
> Running sensors gives:
> nct6791-isa-0290
>
> Based on that the command becomes:
> Mint stephen # isadump -k 0x55,0x55 0x905 0x906
>
> Which outputs:
> 0 1 2 3 4 5 6 7 8 9 a b c d e f
> 00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>
>
>
> If that's correct, I'll go a head and run the rest of them.
No it's not correct, base address 0x290 leads to the following command:
# isadump -k 0x55,0x55 0x295 0x296
As a side note, Guenter, I'd be very surprised if you actually need the
-k here, all Super-I/O chips I saw so far needed a key to access the
configuration space only, not the logical device I/O areas.
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (23 preceding siblings ...)
2013-11-12 7:14 ` Jean Delvare
@ 2013-11-12 7:27 ` p. stephen w
2013-11-12 14:20 ` Guenter Roeck
` (19 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: p. stephen w @ 2013-11-12 7:27 UTC (permalink / raw)
To: lm-sensors
[-- Attachment #1: Type: text/plain, Size: 1538 bytes --]
Please see attached.
___________________________________________________-
The output is attached and matches the order...
isadump -k 0x55,0x55 0x295 0x296
isadump -k 0x55,0x55 0x295 0x296 1
....
isadump -k 0x55,0x55 0x295 0x296 8
On Mon, Nov 11, 2013 at 9:22 PM, Guenter Roeck <linux@roeck-us.net> wrote:
> On Mon, Nov 11, 2013 at 08:05:46PM -0800, Guenter Roeck wrote:
>
> [ ... ]
>
> > No, it won't. I'll dig out other commands for you to run to give me some
> chip
> > register output.
> >
> Following up on this. It would be great if you can do the following.
>
> When executing the the sensors command, you see something like
>
> nct6791-isa-0a00
>
> for the NCT chip. Take the hex number at the end; based on it, run the
> following sequence of commands:
>
> sudo isadump -k 0x55,0x55 0xa05 0xa06
> sudo isadump -k 0x55,0x55 0xa05 0xa06 1
> sudo isadump -k 0x55,0x55 0xa05 0xa06 2
> sudo isadump -k 0x55,0x55 0xa05 0xa06 3
> sudo isadump -k 0x55,0x55 0xa05 0xa06 4
> sudo isadump -k 0x55,0x55 0xa05 0xa06 5
> sudo isadump -k 0x55,0x55 0xa05 0xa06 6
> sudo isadump -k 0x55,0x55 0xa05 0xa06 7
> sudo isadump -k 0x55,0x55 0xa05 0xa06 8
>
> In other words, add 5 and 6 to the hex number and pass it as parameter to
> the
> isadump commands.
>
> This should create a dump of chip registers, which would hopefully help me
> track
> down the problem with pwmX_temp_sel.
>
> Thanks,
> Guenter
>
--
_____________________________
Stephen Wille | pstephenwille.com
*new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
[-- Attachment #2: isadump.txt --]
[-- Type: text/plain, Size: 8100 bytes --]
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 10 32 02 01 01 01 01 3c 00 00 00 49 00 ff ff ff
10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
20: ff 14 46 4b 4b ff ff 33 b2 ff ff ff ff ff ff ff
30: ff 00 ff ff 00 4b 00 cc 02 01 00 00 00 00 00 00
40: ff ff ff ff ff 00 00 ff ff ff ff ff ff ff 02 ff
50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
60: ff ff ff ff ff ff 11 00 ff ff ff ff ff ff ff ff
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 10 00 40 01 01 01 01 3c 00 a6 ff a6 00 ff ff ff
10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
20: ff 1e 4b 4b 4b ff ff 99 ff ff ff ff ff ff ff ff
30: ff 00 ff ff 00 4b 00 cc 02 ff ff ff ff ff ff 00
40: ff ff ff ff ff 00 00 ff ff ff ff ff ff ff 01 ff
50: 24 00 00 4b 00 50 00 ff ff ff ff ff ff ff ff ff
60: ff ff ff ff ff ff 11 00 ff ff ff ff ff ff ff ff
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 10 32 02 01 01 01 01 3c 00 00 00 49 00 ff ff ff
10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
20: ff 14 46 4b 4b ff ff 33 b2 ff ff ff ff ff ff ff
30: ff 00 ff ff 00 4b 00 cc 02 01 00 00 00 00 00 00
40: ff ff ff ff ff 00 00 ff ff ff ff ff ff ff 02 ff
50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
60: ff ff ff ff ff ff 11 00 ff ff ff ff ff ff ff ff
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 10 00 40 01 01 01 01 3c 00 a4 ff a4 00 ff ff ff
10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
20: ff 1e 4b 4b 4b ff ff 99 ff ff ff ff ff ff ff ff
30: ff 00 ff ff 00 4b 00 cc 02 ff ff ff ff ff ff 00
40: ff ff ff ff ff 00 00 ff ff ff ff ff ff ff 03 ff
50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
60: ff ff ff ff ff ff 11 00 ff ff ff ff ff ff ff ff
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff ff
20: ff ff ff 96 64 96 64 e1 96 00 ff ff ff ff ff ff
30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
40: ff ff 00 00 ff ff ff ff ff ff 00 00 00 00 04 ff
50: 03 73 ff ff 00 00 00 ff ff 1e 13 33 09 00 ff ff
60: ff 01 00 00 00 00 00 00 ff ff ff ff ff ff ff ff
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
80: 74 7b d0 cf 7e 1b 76 ca cc 8a 1b 19 18 18 19 00
90: 65 24 1d 5d 5c 5c 00 47 80 23 24 23 23 1d 0f 1d
a0: ff 65 ff ff ff ff a4 49 a4 a4 00 00 00 00 00 00
b0: 2b 1c 23 0a ff 1f ff 1f ff 1f ff 1f 00 00 ff ff
c0: 03 c1 04 aa 00 00 00 00 00 00 00 00 ff ff ff ff
d0: 00 00 00 00 00 00 ff ff ff ff ff ff ff ff ff ff
e0: a4 00 a4 a4 ff ff ff ff ff ff ff ff ff ff ff ff
f0: 23 80 00 00 24 00 01 00 50 00 51 00 00 00 00 ff
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: ff ff 00 00 00 06 00 ff 0f ff ff ff ff 00 00 ff
10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 05 ff
50: ca cc c0 ff 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 7f 3f 3f ff ff ff ff ff ff ff
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 00 00 00 00 00 00 00 ff ff ff ff ff ff ff ff ff
10: 00 00 00 00 00 00 ff ff ff ff ff ff ff ff ff ff
20: ff 03 02 00 ff ff ff ff ff ff ff ff ff ff ff 1f
30: 2b 18 23 08 ff 1f ff 1f ff 1f ff 1f ff 1f ff 1f
40: ff 1f ff 1f 02 02 02 02 02 02 ff ff ff ff 06 ff
50: 7f 7f 7f 7f 00 00 03 c4 04 ac 00 00 00 00 00 00
60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: ff 95 02 10 00 00 00 00 00 64 00 00 00 00 00 00
10: 00 00 00 00 00 00 00 ef e5 f8 80 f8 80 f8 80 01
20: 23 02 08 00 00 00 ef 81 00 ef 00 00 00 00 00 00
30: 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff
40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 07 ff
50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 10 00 40 01 01 01 01 3c 00 a6 ff a6 00 ff ff ff
10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
20: ff 1e 4b 4b 4b ff ff 99 ff ff ff ff ff ff ff ff
30: ff 00 ff ff 00 4b 00 cc 02 ff ff ff ff ff ff 00
40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 08 ff
50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
60: ff ff ff ff ff ff 11 00 ff ff ff ff ff ff ff ff
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[-- Attachment #3: Type: text/plain, Size: 153 bytes --]
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (24 preceding siblings ...)
2013-11-12 7:27 ` p. stephen w
@ 2013-11-12 14:20 ` Guenter Roeck
2013-11-12 14:23 ` Guenter Roeck
` (18 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: Guenter Roeck @ 2013-11-12 14:20 UTC (permalink / raw)
To: lm-sensors
On 11/11/2013 10:25 PM, p. stephen w wrote:
> Running sensors gives:
> nct6791-isa-0290
>
> Based on that the command becomes:
> Mint stephen # isadump -k 0x55,0x55 0x905 0x906
>
No, that should have been
isadump -k 0x55,0x55 0x295 0x296
0x290 -> 0x295, 0x296
Thanks,
Guenter
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (25 preceding siblings ...)
2013-11-12 14:20 ` Guenter Roeck
@ 2013-11-12 14:23 ` Guenter Roeck
2013-11-12 17:23 ` Guenter Roeck
` (17 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: Guenter Roeck @ 2013-11-12 14:23 UTC (permalink / raw)
To: lm-sensors
On 11/11/2013 11:14 PM, Jean Delvare wrote:
> On Mon, 11 Nov 2013 22:25:04 -0800, p. stephen w wrote:
>> Running sensors gives:
>> nct6791-isa-0290
>>
>> Based on that the command becomes:
>> Mint stephen # isadump -k 0x55,0x55 0x905 0x906
>>
>> Which outputs:
>> 0 1 2 3 4 5 6 7 8 9 a b c d e f
>> 00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>> f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>>
>>
>>
>> If that's correct, I'll go a head and run the rest of them.
>
> No it's not correct, base address 0x290 leads to the following command:
>
> # isadump -k 0x55,0x55 0x295 0x296
>
> As a side note, Guenter, I'd be very surprised if you actually need the
> -k here, all Super-I/O chips I saw so far needed a key to access the
> configuration space only, not the logical device I/O areas.
>
You are right - I copied the command from somewhere else and didn't try without,
nor really think about it. "isadump 0x295 0x296" should work as well.
Thanks,
Guenter
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (26 preceding siblings ...)
2013-11-12 14:23 ` Guenter Roeck
@ 2013-11-12 17:23 ` Guenter Roeck
2013-11-12 17:24 ` p. stephen w
` (16 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: Guenter Roeck @ 2013-11-12 17:23 UTC (permalink / raw)
To: lm-sensors
On Mon, Nov 11, 2013 at 11:27:03PM -0800, p. stephen w wrote:
> Please see attached.
Excellent - that helped a lot. I know what is wrong (it is actually a general
driver problem, not just related to the nct6791). I'll have to think about how
to fix it. I'll let you know once I have a fix.
Thanks,
Guenter
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (27 preceding siblings ...)
2013-11-12 17:23 ` Guenter Roeck
@ 2013-11-12 17:24 ` p. stephen w
2013-11-12 17:30 ` Guenter Roeck
` (15 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: p. stephen w @ 2013-11-12 17:24 UTC (permalink / raw)
To: lm-sensors
nice. let me know if I can do anything else.
On Tue, Nov 12, 2013 at 9:23 AM, Guenter Roeck <linux@roeck-us.net> wrote:
> On Mon, Nov 11, 2013 at 11:27:03PM -0800, p. stephen w wrote:
> > Please see attached.
>
> Excellent - that helped a lot. I know what is wrong (it is actually a
> general
> driver problem, not just related to the nct6791). I'll have to think about
> how
> to fix it. I'll let you know once I have a fix.
>
> Thanks,
> Guenter
>
--
_____________________________
Stephen Wille | pstephenwille.com
*new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (28 preceding siblings ...)
2013-11-12 17:24 ` p. stephen w
@ 2013-11-12 17:30 ` Guenter Roeck
2013-11-13 3:40 ` Guenter Roeck
` (14 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: Guenter Roeck @ 2013-11-12 17:30 UTC (permalink / raw)
To: lm-sensors
On Tue, Nov 12, 2013 at 09:24:54AM -0800, p. stephen w wrote:
> nice. let me know if I can do anything else.
>
Sure, you could try to use automatic fan control ;-).
Side note - top posting is discouraged on the lm-sensors mailing list.
Sorry, should have mentioned earlier.
Thanks,
Guenter
>
> On Tue, Nov 12, 2013 at 9:23 AM, Guenter Roeck <linux@roeck-us.net> wrote:
>
> > On Mon, Nov 11, 2013 at 11:27:03PM -0800, p. stephen w wrote:
> > > Please see attached.
> >
> > Excellent - that helped a lot. I know what is wrong (it is actually a
> > general
> > driver problem, not just related to the nct6791). I'll have to think about
> > how
> > to fix it. I'll let you know once I have a fix.
> >
> > Thanks,
> > Guenter
> >
>
>
>
> --
>
>
> _____________________________
> Stephen Wille | pstephenwille.com
> *new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (29 preceding siblings ...)
2013-11-12 17:30 ` Guenter Roeck
@ 2013-11-13 3:40 ` Guenter Roeck
2013-11-13 4:07 ` p. stephen w
` (13 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: Guenter Roeck @ 2013-11-13 3:40 UTC (permalink / raw)
To: lm-sensors
On Mon, Nov 11, 2013 at 11:27:03PM -0800, p. stephen w wrote:
> Please see attached.
> ___________________________________________________-
> The output is attached and matches the order...
>
> isadump -k 0x55,0x55 0x295 0x296
> isadump -k 0x55,0x55 0x295 0x296 1
> ....
> isadump -k 0x55,0x55 0x295 0x296 8
>
>
>
>
> On Mon, Nov 11, 2013 at 9:22 PM, Guenter Roeck <linux@roeck-us.net> wrote:
>
> > On Mon, Nov 11, 2013 at 08:05:46PM -0800, Guenter Roeck wrote:
> >
> > [ ... ]
> >
> > > No, it won't. I'll dig out other commands for you to run to give me some
> > chip
> > > register output.
> > >
> > Following up on this. It would be great if you can do the following.
> >
> > When executing the the sensors command, you see something like
> >
> > nct6791-isa-0a00
> >
> > for the NCT chip. Take the hex number at the end; based on it, run the
> > following sequence of commands:
> >
> > sudo isadump -k 0x55,0x55 0xa05 0xa06
> > sudo isadump -k 0x55,0x55 0xa05 0xa06 1
> > sudo isadump -k 0x55,0x55 0xa05 0xa06 2
> > sudo isadump -k 0x55,0x55 0xa05 0xa06 3
> > sudo isadump -k 0x55,0x55 0xa05 0xa06 4
> > sudo isadump -k 0x55,0x55 0xa05 0xa06 5
> > sudo isadump -k 0x55,0x55 0xa05 0xa06 6
> > sudo isadump -k 0x55,0x55 0xa05 0xa06 7
> > sudo isadump -k 0x55,0x55 0xa05 0xa06 8
> >
> > In other words, add 5 and 6 to the hex number and pass it as parameter to
> > the
> > isadump commands.
> >
> > This should create a dump of chip registers, which would hopefully help me
> > track
> > down the problem with pwmX_temp_sel.
> >
Hi,
I think I fixed the problem. It would be great if you can update the repository
from github and try again.
Please provide output from the sensors command as well as from
"grep . /sys/class/hwmon/hwmon2/device/*".
Thanks,
Guenter
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (30 preceding siblings ...)
2013-11-13 3:40 ` Guenter Roeck
@ 2013-11-13 4:07 ` p. stephen w
2013-11-13 4:29 ` Guenter Roeck
` (12 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: p. stephen w @ 2013-11-13 4:07 UTC (permalink / raw)
To: lm-sensors
[-- Attachment #1: Type: text/plain, Size: 2312 bytes --]
Please see attached.
_______________________________________
The attached shows all the commands and their output as I ran through them.
Let me know if I missed something, or more info is needed.
On Tue, Nov 12, 2013 at 7:40 PM, Guenter Roeck <linux@roeck-us.net> wrote:
> On Mon, Nov 11, 2013 at 11:27:03PM -0800, p. stephen w wrote:
> > Please see attached.
> > ___________________________________________________-
> > The output is attached and matches the order...
> >
> > isadump -k 0x55,0x55 0x295 0x296
> > isadump -k 0x55,0x55 0x295 0x296 1
> > ....
> > isadump -k 0x55,0x55 0x295 0x296 8
> >
> >
> >
> >
> > On Mon, Nov 11, 2013 at 9:22 PM, Guenter Roeck <linux@roeck-us.net>
> wrote:
> >
> > > On Mon, Nov 11, 2013 at 08:05:46PM -0800, Guenter Roeck wrote:
> > >
> > > [ ... ]
> > >
> > > > No, it won't. I'll dig out other commands for you to run to give me
> some
> > > chip
> > > > register output.
> > > >
> > > Following up on this. It would be great if you can do the following.
> > >
> > > When executing the the sensors command, you see something like
> > >
> > > nct6791-isa-0a00
> > >
> > > for the NCT chip. Take the hex number at the end; based on it, run the
> > > following sequence of commands:
> > >
> > > sudo isadump -k 0x55,0x55 0xa05 0xa06
> > > sudo isadump -k 0x55,0x55 0xa05 0xa06 1
> > > sudo isadump -k 0x55,0x55 0xa05 0xa06 2
> > > sudo isadump -k 0x55,0x55 0xa05 0xa06 3
> > > sudo isadump -k 0x55,0x55 0xa05 0xa06 4
> > > sudo isadump -k 0x55,0x55 0xa05 0xa06 5
> > > sudo isadump -k 0x55,0x55 0xa05 0xa06 6
> > > sudo isadump -k 0x55,0x55 0xa05 0xa06 7
> > > sudo isadump -k 0x55,0x55 0xa05 0xa06 8
> > >
> > > In other words, add 5 and 6 to the hex number and pass it as parameter
> to
> > > the
> > > isadump commands.
> > >
> > > This should create a dump of chip registers, which would hopefully
> help me
> > > track
> > > down the problem with pwmX_temp_sel.
> > >
>
> Hi,
>
> I think I fixed the problem. It would be great if you can update the
> repository
> from github and try again.
>
> Please provide output from the sensors command as well as from
> "grep . /sys/class/hwmon/hwmon2/device/*".
>
> Thanks,
> Guenter
>
--
_____________________________
Stephen Wille | pstephenwille.com
*new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: newNCT6775readings.txt --]
[-- Type: text/plain; charset=US-ASCII; name="newNCT6775readings.txt", Size: 18620 bytes --]
NEW INSTALL
================
git clone https://github.com/groeck/nct6775.git
Cloning into 'nct6775'...
remote: Counting objects: 296, done.
remote: Compressing objects: 100% (144/144), done.
remote: Total 296 (delta 172), reused 267 (delta 152)
Receiving objects: 100% (296/296), 151.58 KiB, done.
Resolving deltas: 100% (172/172), done.
===================
Mint nct6775 # make all
CC [M] /home/stephen/Downloads/nct6775/nct6775.o
Building modules, stage 2.
MODPOST 1 modules
CC /home/stephen/Downloads/nct6775/nct6775.mod.o
LD [M] /home/stephen/Downloads/nct6775/nct6775.ko
Mint nct6775 # make install
cp nct6775.ko /lib/modules/3.8.0-19-generic/kernel/drivers/hwmon
depmod -a -F /boot/System.map-3.8.0-19-generic 3.8.0-19-generic
Mint nct6775 # modprobe nct6775
==================
Mint nct6775 # sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +27.8°C (crit = +105.0°C)
temp2: +29.8°C (crit = +105.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +34.0°C (high = +80.0°C, crit = +100.0°C)
Core 0: +31.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +30.0°C (high = +80.0°C, crit = +100.0°C)
Core 2: +33.0°C (high = +80.0°C, crit = +100.0°C)
Core 3: +29.0°C (high = +80.0°C, crit = +100.0°C)
nct6791-isa-0290
Adapter: ISA adapter
in0: +0.93 V (min = +0.00 V, max = +1.74 V)
in1: +0.98 V (min = +0.00 V, max = +0.00 V) ALARM
in2: +3.33 V (min = +0.00 V, max = +0.00 V) ALARM
in3: +3.31 V (min = +0.00 V, max = +0.00 V) ALARM
in4: +1.01 V (min = +0.00 V, max = +0.00 V) ALARM
in5: +0.20 V (min = +0.00 V, max = +0.00 V) ALARM
in6: +0.94 V (min = +0.00 V, max = +0.00 V) ALARM
in7: +3.23 V (min = +0.00 V, max = +0.00 V) ALARM
in8: +3.26 V (min = +0.00 V, max = +0.00 V) ALARM
in9: +1.10 V (min = +0.00 V, max = +0.00 V) ALARM
in10: +0.20 V (min = +0.00 V, max = +0.00 V) ALARM
in11: +0.18 V (min = +0.00 V, max = +0.00 V) ALARM
in12: +0.17 V (min = +0.00 V, max = +0.00 V) ALARM
in13: +0.17 V (min = +0.00 V, max = +0.00 V) ALARM
in14: +0.18 V (min = +0.00 V, max = +0.00 V) ALARM
fan1: 948 RPM (min = 0 RPM)
fan2: 1221 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
SYSTIN: +105.0°C (high = +0.0°C, hyst = +0.0°C) sensor = thermistor
CPUTIN: +34.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
AUXTIN0: +29.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = thermistor
AUXTIN1: +98.0°C sensor = thermistor
AUXTIN2: +97.0°C sensor = thermistor
AUXTIN3: +97.0°C sensor = thermistor
PCH_CHIP_CPU_MAX_TEMP: +0.0°C
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
PCH_MCH_TEMP: +0.0°C
intrusion0: ALARM
intrusion1: ALARM
beep_enable: disabled
===============================
grep . /sys/class/hwmon/hwmon2/device/*
/sys/class/hwmon/hwmon2/device/beep_enable:0
/sys/class/hwmon/hwmon2/device/fan1_alarm:0
/sys/class/hwmon/hwmon2/device/fan1_beep:0
/sys/class/hwmon/hwmon2/device/fan1_input:947
/sys/class/hwmon/hwmon2/device/fan1_min:0
/sys/class/hwmon/hwmon2/device/fan1_pulses:2
/sys/class/hwmon/hwmon2/device/fan1_target:0
/sys/class/hwmon/hwmon2/device/fan1_tolerance:0
/sys/class/hwmon/hwmon2/device/fan2_alarm:0
/sys/class/hwmon/hwmon2/device/fan2_beep:0
/sys/class/hwmon/hwmon2/device/fan2_input:1218
/sys/class/hwmon/hwmon2/device/fan2_min:0
/sys/class/hwmon/hwmon2/device/fan2_pulses:2
/sys/class/hwmon/hwmon2/device/fan2_target:27000
/sys/class/hwmon/hwmon2/device/fan2_tolerance:0
/sys/class/hwmon/hwmon2/device/fan3_alarm:0
/sys/class/hwmon/hwmon2/device/fan3_beep:0
/sys/class/hwmon/hwmon2/device/fan3_input:0
/sys/class/hwmon/hwmon2/device/fan3_min:0
/sys/class/hwmon/hwmon2/device/fan3_pulses:2
/sys/class/hwmon/hwmon2/device/fan3_target:0
/sys/class/hwmon/hwmon2/device/fan3_tolerance:0
/sys/class/hwmon/hwmon2/device/fan4_alarm:0
/sys/class/hwmon/hwmon2/device/fan4_beep:0
/sys/class/hwmon/hwmon2/device/fan4_input:0
/sys/class/hwmon/hwmon2/device/fan4_min:0
/sys/class/hwmon/hwmon2/device/fan4_pulses:2
/sys/class/hwmon/hwmon2/device/fan4_target:0
/sys/class/hwmon/hwmon2/device/fan4_tolerance:0
/sys/class/hwmon/hwmon2/device/fan5_alarm:0
/sys/class/hwmon/hwmon2/device/fan5_beep:0
/sys/class/hwmon/hwmon2/device/fan5_input:0
/sys/class/hwmon/hwmon2/device/fan5_min:0
/sys/class/hwmon/hwmon2/device/fan5_pulses:2
/sys/class/hwmon/hwmon2/device/fan5_target:0
/sys/class/hwmon/hwmon2/device/fan5_tolerance:0
/sys/class/hwmon/hwmon2/device/in0_alarm:0
/sys/class/hwmon/hwmon2/device/in0_beep:0
/sys/class/hwmon/hwmon2/device/in0_input:928
/sys/class/hwmon/hwmon2/device/in0_max:1744
/sys/class/hwmon/hwmon2/device/in0_min:0
/sys/class/hwmon/hwmon2/device/in10_alarm:1
/sys/class/hwmon/hwmon2/device/in10_beep:0
/sys/class/hwmon/hwmon2/device/in10_input:208
/sys/class/hwmon/hwmon2/device/in10_max:0
/sys/class/hwmon/hwmon2/device/in10_min:0
/sys/class/hwmon/hwmon2/device/in11_alarm:1
/sys/class/hwmon/hwmon2/device/in11_beep:0
/sys/class/hwmon/hwmon2/device/in11_input:184
/sys/class/hwmon/hwmon2/device/in11_max:0
/sys/class/hwmon/hwmon2/device/in11_min:0
/sys/class/hwmon/hwmon2/device/in12_alarm:1
/sys/class/hwmon/hwmon2/device/in12_beep:0
/sys/class/hwmon/hwmon2/device/in12_input:176
/sys/class/hwmon/hwmon2/device/in12_max:0
/sys/class/hwmon/hwmon2/device/in12_min:0
/sys/class/hwmon/hwmon2/device/in13_alarm:1
/sys/class/hwmon/hwmon2/device/in13_beep:0
/sys/class/hwmon/hwmon2/device/in13_input:176
/sys/class/hwmon/hwmon2/device/in13_max:0
/sys/class/hwmon/hwmon2/device/in13_min:0
/sys/class/hwmon/hwmon2/device/in14_alarm:1
/sys/class/hwmon/hwmon2/device/in14_beep:0
/sys/class/hwmon/hwmon2/device/in14_input:184
/sys/class/hwmon/hwmon2/device/in14_max:0
/sys/class/hwmon/hwmon2/device/in14_min:0
/sys/class/hwmon/hwmon2/device/in1_alarm:1
/sys/class/hwmon/hwmon2/device/in1_beep:0
/sys/class/hwmon/hwmon2/device/in1_input:984
/sys/class/hwmon/hwmon2/device/in1_max:0
/sys/class/hwmon/hwmon2/device/in1_min:0
/sys/class/hwmon/hwmon2/device/in2_alarm:1
/sys/class/hwmon/hwmon2/device/in2_beep:0
/sys/class/hwmon/hwmon2/device/in2_input:3328
/sys/class/hwmon/hwmon2/device/in2_max:0
/sys/class/hwmon/hwmon2/device/in2_min:0
/sys/class/hwmon/hwmon2/device/in3_alarm:1
/sys/class/hwmon/hwmon2/device/in3_beep:0
/sys/class/hwmon/hwmon2/device/in3_input:3312
/sys/class/hwmon/hwmon2/device/in3_max:0
/sys/class/hwmon/hwmon2/device/in3_min:0
/sys/class/hwmon/hwmon2/device/in4_alarm:1
/sys/class/hwmon/hwmon2/device/in4_beep:0
/sys/class/hwmon/hwmon2/device/in4_input:1008
/sys/class/hwmon/hwmon2/device/in4_max:0
/sys/class/hwmon/hwmon2/device/in4_min:0
/sys/class/hwmon/hwmon2/device/in5_alarm:1
/sys/class/hwmon/hwmon2/device/in5_beep:0
/sys/class/hwmon/hwmon2/device/in5_input:208
/sys/class/hwmon/hwmon2/device/in5_max:0
/sys/class/hwmon/hwmon2/device/in5_min:0
/sys/class/hwmon/hwmon2/device/in6_alarm:1
/sys/class/hwmon/hwmon2/device/in6_beep:0
/sys/class/hwmon/hwmon2/device/in6_input:936
/sys/class/hwmon/hwmon2/device/in6_max:0
/sys/class/hwmon/hwmon2/device/in6_min:0
/sys/class/hwmon/hwmon2/device/in7_alarm:1
/sys/class/hwmon/hwmon2/device/in7_beep:0
/sys/class/hwmon/hwmon2/device/in7_input:3232
/sys/class/hwmon/hwmon2/device/in7_max:0
/sys/class/hwmon/hwmon2/device/in7_min:0
/sys/class/hwmon/hwmon2/device/in8_alarm:1
/sys/class/hwmon/hwmon2/device/in8_beep:0
/sys/class/hwmon/hwmon2/device/in8_input:3264
/sys/class/hwmon/hwmon2/device/in8_max:0
/sys/class/hwmon/hwmon2/device/in8_min:0
/sys/class/hwmon/hwmon2/device/in9_alarm:1
/sys/class/hwmon/hwmon2/device/in9_beep:0
/sys/class/hwmon/hwmon2/device/in9_input:1104
/sys/class/hwmon/hwmon2/device/in9_max:0
/sys/class/hwmon/hwmon2/device/in9_min:0
/sys/class/hwmon/hwmon2/device/intrusion0_alarm:1
/sys/class/hwmon/hwmon2/device/intrusion0_beep:0
/sys/class/hwmon/hwmon2/device/intrusion1_alarm:1
/sys/class/hwmon/hwmon2/device/intrusion1_beep:0
/sys/class/hwmon/hwmon2/device/modalias:platform:nct6775
/sys/class/hwmon/hwmon2/device/name:nct6791
/sys/class/hwmon/hwmon2/device/pwm1:162
/sys/class/hwmon/hwmon2/device/pwm1_auto_point1_pwm:153
/sys/class/hwmon/hwmon2/device/pwm1_auto_point1_temp:30000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point2_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point2_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm1_enable:5
/sys/class/hwmon/hwmon2/device/pwm1_floor:1
/sys/class/hwmon/hwmon2/device/pwm1_mode:1
/sys/class/hwmon/hwmon2/device/pwm1_start:1
/sys/class/hwmon/hwmon2/device/pwm1_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm1_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm1_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm1_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm1_temp_sel:0
/sys/class/hwmon/hwmon2/device/pwm1_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm1_weight_duty_base:255
/sys/class/hwmon/hwmon2/device/pwm1_weight_duty_step:255
/sys/class/hwmon/hwmon2/device/pwm1_weight_temp_sel:0
/sys/class/hwmon/hwmon2/device/pwm1_weight_temp_step:255000
/sys/class/hwmon/hwmon2/device/pwm1_weight_temp_step_base:255000
/sys/class/hwmon/hwmon2/device/pwm1_weight_temp_step_tol:255000
/sys/class/hwmon/hwmon2/device/pwm2:0
/sys/class/hwmon/hwmon2/device/pwm2_auto_point1_pwm:51
/sys/class/hwmon/hwmon2/device/pwm2_auto_point1_temp:20000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point2_pwm:178
/sys/class/hwmon/hwmon2/device/pwm2_auto_point2_temp:70000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm2_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm2_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm2_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm2_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm2_enable:1
/sys/class/hwmon/hwmon2/device/pwm2_floor:1
/sys/class/hwmon/hwmon2/device/pwm2_mode:1
/sys/class/hwmon/hwmon2/device/pwm2_start:1
/sys/class/hwmon/hwmon2/device/pwm2_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm2_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm2_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm2_target_temp:50000
/sys/class/hwmon/hwmon2/device/pwm2_temp_sel:0
/sys/class/hwmon/hwmon2/device/pwm2_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_duty_base:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_duty_step:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_sel:1
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_step:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_step_base:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_step_tol:0
/sys/class/hwmon/hwmon2/device/pwm3:162
/sys/class/hwmon/hwmon2/device/pwm3_auto_point1_pwm:153
/sys/class/hwmon/hwmon2/device/pwm3_auto_point1_temp:30000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point2_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point2_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm3_enable:5
/sys/class/hwmon/hwmon2/device/pwm3_floor:1
/sys/class/hwmon/hwmon2/device/pwm3_mode:1
/sys/class/hwmon/hwmon2/device/pwm3_start:1
/sys/class/hwmon/hwmon2/device/pwm3_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm3_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm3_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm3_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm3_temp_sel:0
/sys/class/hwmon/hwmon2/device/pwm3_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm3_weight_duty_base:255
/sys/class/hwmon/hwmon2/device/pwm3_weight_duty_step:255
/sys/class/hwmon/hwmon2/device/pwm3_weight_temp_sel:0
/sys/class/hwmon/hwmon2/device/pwm3_weight_temp_step:255000
/sys/class/hwmon/hwmon2/device/pwm3_weight_temp_step_base:255000
/sys/class/hwmon/hwmon2/device/pwm3_weight_temp_step_tol:255000
/sys/class/hwmon/hwmon2/device/pwm4:162
/sys/class/hwmon/hwmon2/device/pwm4_auto_point1_pwm:153
/sys/class/hwmon/hwmon2/device/pwm4_auto_point1_temp:30000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point2_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point2_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm4_enable:5
/sys/class/hwmon/hwmon2/device/pwm4_floor:1
/sys/class/hwmon/hwmon2/device/pwm4_mode:1
/sys/class/hwmon/hwmon2/device/pwm4_start:1
/sys/class/hwmon/hwmon2/device/pwm4_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm4_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm4_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm4_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm4_temp_sel:0
/sys/class/hwmon/hwmon2/device/pwm4_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm4_weight_duty_base:255
/sys/class/hwmon/hwmon2/device/pwm4_weight_duty_step:255
/sys/class/hwmon/hwmon2/device/pwm4_weight_temp_sel:0
/sys/class/hwmon/hwmon2/device/pwm4_weight_temp_step:255000
/sys/class/hwmon/hwmon2/device/pwm4_weight_temp_step_base:255000
/sys/class/hwmon/hwmon2/device/pwm4_weight_temp_step_tol:255000
/sys/class/hwmon/hwmon2/device/pwm5:255
/sys/class/hwmon/hwmon2/device/pwm5_auto_point1_pwm:140
/sys/class/hwmon/hwmon2/device/pwm5_auto_point1_temp:25000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point2_pwm:170
/sys/class/hwmon/hwmon2/device/pwm5_auto_point2_temp:35000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point3_pwm:200
/sys/class/hwmon/hwmon2/device/pwm5_auto_point3_temp:45000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point4_pwm:230
/sys/class/hwmon/hwmon2/device/pwm5_auto_point4_temp:55000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm5_auto_point5_temp:60000
/sys/class/hwmon/hwmon2/device/pwm5_crit_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm5_enable:0
/sys/class/hwmon/hwmon2/device/pwm5_floor:1
/sys/class/hwmon/hwmon2/device/pwm5_mode:1
/sys/class/hwmon/hwmon2/device/pwm5_start:1
/sys/class/hwmon/hwmon2/device/pwm5_step_down_time:1000
/sys/class/hwmon/hwmon2/device/pwm5_step_up_time:1000
/sys/class/hwmon/hwmon2/device/pwm5_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm5_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm5_temp_sel:3
/sys/class/hwmon/hwmon2/device/pwm5_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm5_weight_duty_base:255
/sys/class/hwmon/hwmon2/device/pwm5_weight_duty_step:255
/sys/class/hwmon/hwmon2/device/pwm5_weight_temp_sel:0
/sys/class/hwmon/hwmon2/device/pwm5_weight_temp_step:255000
/sys/class/hwmon/hwmon2/device/pwm5_weight_temp_step_base:255000
/sys/class/hwmon/hwmon2/device/pwm5_weight_temp_step_tol:255000
/sys/class/hwmon/hwmon2/device/temp10_input:0
/sys/class/hwmon/hwmon2/device/temp10_label:PCH_MCH_TEMP
/sys/class/hwmon/hwmon2/device/temp1_input:104000
/sys/class/hwmon/hwmon2/device/temp1_label:SYSTIN
/sys/class/hwmon/hwmon2/device/temp1_max:0
/sys/class/hwmon/hwmon2/device/temp1_max_hyst:0
/sys/class/hwmon/hwmon2/device/temp1_offset:0
/sys/class/hwmon/hwmon2/device/temp1_type:4
/sys/class/hwmon/hwmon2/device/temp2_alarm:0
/sys/class/hwmon/hwmon2/device/temp2_beep:0
/sys/class/hwmon/hwmon2/device/temp2_input:35000
/sys/class/hwmon/hwmon2/device/temp2_label:CPUTIN
/sys/class/hwmon/hwmon2/device/temp2_max:80000
/sys/class/hwmon/hwmon2/device/temp2_max_hyst:75000
/sys/class/hwmon/hwmon2/device/temp2_offset:0
/sys/class/hwmon/hwmon2/device/temp2_type:4
/sys/class/hwmon/hwmon2/device/temp3_alarm:1
/sys/class/hwmon/hwmon2/device/temp3_beep:0
/sys/class/hwmon/hwmon2/device/temp3_input:29000
/sys/class/hwmon/hwmon2/device/temp3_label:AUXTIN0
/sys/class/hwmon/hwmon2/device/temp3_max:0
/sys/class/hwmon/hwmon2/device/temp3_max_hyst:0
/sys/class/hwmon/hwmon2/device/temp3_offset:0
/sys/class/hwmon/hwmon2/device/temp3_type:4
/sys/class/hwmon/hwmon2/device/temp4_input:97000
/sys/class/hwmon/hwmon2/device/temp4_label:AUXTIN1
/sys/class/hwmon/hwmon2/device/temp4_offset:0
/sys/class/hwmon/hwmon2/device/temp4_type:4
/sys/class/hwmon/hwmon2/device/temp5_input:96000
/sys/class/hwmon/hwmon2/device/temp5_label:AUXTIN2
/sys/class/hwmon/hwmon2/device/temp5_offset:0
/sys/class/hwmon/hwmon2/device/temp5_type:4
/sys/class/hwmon/hwmon2/device/temp6_input:96000
/sys/class/hwmon/hwmon2/device/temp6_label:AUXTIN3
/sys/class/hwmon/hwmon2/device/temp6_offset:0
/sys/class/hwmon/hwmon2/device/temp6_type:4
/sys/class/hwmon/hwmon2/device/temp7_input:0
/sys/class/hwmon/hwmon2/device/temp7_label:PCH_CHIP_CPU_MAX_TEMP
/sys/class/hwmon/hwmon2/device/temp8_input:0
/sys/class/hwmon/hwmon2/device/temp8_label:PCH_CHIP_TEMP
/sys/class/hwmon/hwmon2/device/temp9_input:0
/sys/class/hwmon/hwmon2/device/temp9_label:PCH_CPU_TEMP
/sys/class/hwmon/hwmon2/device/uevent:DRIVER=nct6775
/sys/class/hwmon/hwmon2/device/uevent:MODALIAS=platform:nct6775
[-- Attachment #3: Type: text/plain, Size: 153 bytes --]
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (31 preceding siblings ...)
2013-11-13 4:07 ` p. stephen w
@ 2013-11-13 4:29 ` Guenter Roeck
2013-11-13 4:38 ` p. stephen w
` (11 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: Guenter Roeck @ 2013-11-13 4:29 UTC (permalink / raw)
To: lm-sensors
On Tue, Nov 12, 2013 at 08:07:09PM -0800, p. stephen w wrote:
> Please see attached.
> _______________________________________
> The attached shows all the commands and their output as I ran through them.
>
> Let me know if I missed something, or more info is needed.
>
Puzzled. Did you unload the old driver with "modprobe -r nct6775" before reloading it ?
Thanks,
Guenter
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (32 preceding siblings ...)
2013-11-13 4:29 ` Guenter Roeck
@ 2013-11-13 4:38 ` p. stephen w
2013-11-13 5:10 ` Guenter Roeck
` (10 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: p. stephen w @ 2013-11-13 4:38 UTC (permalink / raw)
To: lm-sensors
no, I only deleted the nct6775 folder I used to clone the repo into.
I can remove it, and run through the install again.
On Tue, Nov 12, 2013 at 8:29 PM, Guenter Roeck <linux@roeck-us.net> wrote:
> On Tue, Nov 12, 2013 at 08:07:09PM -0800, p. stephen w wrote:
> > Please see attached.
> > _______________________________________
> > The attached shows all the commands and their output as I ran through
> them.
> >
> > Let me know if I missed something, or more info is needed.
> >
> Puzzled. Did you unload the old driver with "modprobe -r nct6775" before
> reloading it ?
>
> Thanks,
> Guenter
>
--
_____________________________
Stephen Wille | pstephenwille.com
*new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (33 preceding siblings ...)
2013-11-13 4:38 ` p. stephen w
@ 2013-11-13 5:10 ` Guenter Roeck
2013-11-13 5:17 ` p. stephen w
` (9 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: Guenter Roeck @ 2013-11-13 5:10 UTC (permalink / raw)
To: lm-sensors
On 11/12/2013 08:38 PM, p. stephen w wrote:
> no, I only deleted the nct6775 folder I used to clone the repo into.
> I can remove it, and run through the install again.
>
>
Hi,
That is not what I meant. To load the new version of the module, you need to unload the old version first,
using "modprobe -r". Just installing the new version of a module doesn't unload the old one.
Thanks,
Guenter
> On Tue, Nov 12, 2013 at 8:29 PM, Guenter Roeck <linux@roeck-us.net <mailto:linux@roeck-us.net>> wrote:
>
> On Tue, Nov 12, 2013 at 08:07:09PM -0800, p. stephen w wrote:
> > Please see attached.
> > _______________________________________
> > The attached shows all the commands and their output as I ran through them.
> >
> > Let me know if I missed something, or more info is needed.
> >
> Puzzled. Did you unload the old driver with "modprobe -r nct6775" before reloading it ?
>
> Thanks,
> Guenter
>
>
>
>
> --
>
>
> _____________________________
> Stephen Wille | pstephenwille.com <http://pstephenwille.com>
> /new address p.stephenwille@gmail.com <mailto:p.stephenwille@gmail.com>/
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (34 preceding siblings ...)
2013-11-13 5:10 ` Guenter Roeck
@ 2013-11-13 5:17 ` p. stephen w
2013-11-13 6:16 ` Guenter Roeck
` (8 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: p. stephen w @ 2013-11-13 5:17 UTC (permalink / raw)
To: lm-sensors
[-- Attachment #1: Type: text/plain, Size: 1453 bytes --]
Good to know.
Please see the attached.
On Tue, Nov 12, 2013 at 9:10 PM, Guenter Roeck <linux@roeck-us.net> wrote:
> On 11/12/2013 08:38 PM, p. stephen w wrote:
>
>> no, I only deleted the nct6775 folder I used to clone the repo into.
>> I can remove it, and run through the install again.
>>
>>
>> Hi,
>
> That is not what I meant. To load the new version of the module, you need
> to unload the old version first,
> using "modprobe -r". Just installing the new version of a module doesn't
> unload the old one.
>
> Thanks,
> Guenter
>
> On Tue, Nov 12, 2013 at 8:29 PM, Guenter Roeck <linux@roeck-us.net<mailto:
>> linux@roeck-us.net>> wrote:
>>
>> On Tue, Nov 12, 2013 at 08:07:09PM -0800, p. stephen w wrote:
>> > Please see attached.
>> > _______________________________________
>> > The attached shows all the commands and their output as I ran
>> through them.
>> >
>> > Let me know if I missed something, or more info is needed.
>> >
>> Puzzled. Did you unload the old driver with "modprobe -r nct6775"
>> before reloading it ?
>>
>> Thanks,
>> Guenter
>>
>>
>>
>>
>> --
>>
>>
>> _____________________________
>> Stephen Wille | pstephenwille.com <http://pstephenwille.com>
>> /new address p.stephenwille@gmail.com <mailto:p.stephenwille@gmail.com>/
>>
>
>
--
_____________________________
Stephen Wille | pstephenwille.com
*new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: newNCT6775readings.a.txt --]
[-- Type: text/plain; charset=US-ASCII; name="newNCT6775readings.a.txt", Size: 18856 bytes --]
Mint Downloads # modprobe -r nct6775
Mint Downloads # ls
lm_sensors-3.3.4 lm_sensors-3.3.4.tar.bz2 nct6775
Mint Downloads # rm -rf nct6775/
Mint Downloads # ls
lm_sensors-3.3.4 lm_sensors-3.3.4.tar.bz2
Mint Downloads # git clone https://github.com/groeck/nct6775.git
Cloning into 'nct6775'...
remote: Counting objects: 296, done.
remote: Compressing objects: 100% (144/144), done.
remote: Total 296 (delta 172), reused 267 (delta 152)
Receiving objects: 100% (296/296), 151.58 KiB, done.
Resolving deltas: 100% (172/172), done.
Mint Downloads #
=============
Mint nct6775 # ls
compat.h LICENSE lm75.h Makefile nct6775.c README README.ASRock
Mint nct6775 # make all
CC [M] /home/stephen/Downloads/nct6775/nct6775.o
Building modules, stage 2.
MODPOST 1 modules
CC /home/stephen/Downloads/nct6775/nct6775.mod.o
LD [M] /home/stephen/Downloads/nct6775/nct6775.ko
Mint nct6775 # make install
cp nct6775.ko /lib/modules/3.8.0-19-generic/kernel/drivers/hwmon
depmod -a -F /boot/System.map-3.8.0-19-generic 3.8.0-19-generic
Mint nct6775 #
================
acpitz-virtual-0
Adapter: Virtual device
temp1: +27.8°C (crit = +105.0°C)
temp2: +29.8°C (crit = +105.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +36.0°C (high = +80.0°C, crit = +100.0°C)
Core 0: +34.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +31.0°C (high = +80.0°C, crit = +100.0°C)
Core 2: +34.0°C (high = +80.0°C, crit = +100.0°C)
Core 3: +32.0°C (high = +80.0°C, crit = +100.0°C)
nct6791-isa-0290
Adapter: ISA adapter
in0: +0.93 V (min = +0.00 V, max = +1.74 V)
in1: +0.98 V (min = +0.00 V, max = +0.00 V) ALARM
in2: +3.33 V (min = +0.00 V, max = +0.00 V) ALARM
in3: +3.31 V (min = +0.00 V, max = +0.00 V) ALARM
in4: +1.01 V (min = +0.00 V, max = +0.00 V) ALARM
in5: +0.22 V (min = +0.00 V, max = +0.00 V) ALARM
in6: +0.94 V (min = +0.00 V, max = +0.00 V) ALARM
in7: +3.23 V (min = +0.00 V, max = +0.00 V) ALARM
in8: +3.26 V (min = +0.00 V, max = +0.00 V) ALARM
in9: +1.10 V (min = +0.00 V, max = +0.00 V) ALARM
in10: +0.22 V (min = +0.00 V, max = +0.00 V) ALARM
in11: +0.20 V (min = +0.00 V, max = +0.00 V) ALARM
in12: +0.19 V (min = +0.00 V, max = +0.00 V) ALARM
in13: +0.20 V (min = +0.00 V, max = +0.00 V) ALARM
in14: +0.21 V (min = +0.00 V, max = +0.00 V) ALARM
fan1: 974 RPM (min = 0 RPM)
fan2: 1205 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
SYSTIN: +99.0°C (high = +0.0°C, hyst = +0.0°C) sensor = thermistor
CPUTIN: +37.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
AUXTIN0: +29.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = thermistor
AUXTIN1: +92.0°C sensor = thermistor
AUXTIN2: +91.0°C sensor = thermistor
AUXTIN3: +91.0°C sensor = thermistor
PECI Agent 0: +36.0°C
PCH_CHIP_CPU_MAX_TEMP: +0.0°C
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
intrusion0: ALARM
intrusion1: ALARM
beep_enable: disabled
===================
grep . /sys/class/hwmon/hwmon2/device/*
/sys/class/hwmon/hwmon2/device/beep_enable:0
/sys/class/hwmon/hwmon2/device/fan1_alarm:0
/sys/class/hwmon/hwmon2/device/fan1_beep:0
/sys/class/hwmon/hwmon2/device/fan1_input:962
/sys/class/hwmon/hwmon2/device/fan1_min:0
/sys/class/hwmon/hwmon2/device/fan1_pulses:2
/sys/class/hwmon/hwmon2/device/fan1_target:0
/sys/class/hwmon/hwmon2/device/fan1_tolerance:0
/sys/class/hwmon/hwmon2/device/fan2_alarm:0
/sys/class/hwmon/hwmon2/device/fan2_beep:0
/sys/class/hwmon/hwmon2/device/fan2_input:1201
/sys/class/hwmon/hwmon2/device/fan2_min:0
/sys/class/hwmon/hwmon2/device/fan2_pulses:2
/sys/class/hwmon/hwmon2/device/fan2_target:27000
/sys/class/hwmon/hwmon2/device/fan2_tolerance:0
/sys/class/hwmon/hwmon2/device/fan3_alarm:0
/sys/class/hwmon/hwmon2/device/fan3_beep:0
/sys/class/hwmon/hwmon2/device/fan3_input:0
/sys/class/hwmon/hwmon2/device/fan3_min:0
/sys/class/hwmon/hwmon2/device/fan3_pulses:2
/sys/class/hwmon/hwmon2/device/fan3_target:0
/sys/class/hwmon/hwmon2/device/fan3_tolerance:0
/sys/class/hwmon/hwmon2/device/fan4_alarm:0
/sys/class/hwmon/hwmon2/device/fan4_beep:0
/sys/class/hwmon/hwmon2/device/fan4_input:0
/sys/class/hwmon/hwmon2/device/fan4_min:0
/sys/class/hwmon/hwmon2/device/fan4_pulses:2
/sys/class/hwmon/hwmon2/device/fan4_target:0
/sys/class/hwmon/hwmon2/device/fan4_tolerance:0
/sys/class/hwmon/hwmon2/device/fan5_alarm:0
/sys/class/hwmon/hwmon2/device/fan5_beep:0
/sys/class/hwmon/hwmon2/device/fan5_input:0
/sys/class/hwmon/hwmon2/device/fan5_min:0
/sys/class/hwmon/hwmon2/device/fan5_pulses:2
/sys/class/hwmon/hwmon2/device/fan5_target:0
/sys/class/hwmon/hwmon2/device/fan5_tolerance:0
/sys/class/hwmon/hwmon2/device/in0_alarm:0
/sys/class/hwmon/hwmon2/device/in0_beep:0
/sys/class/hwmon/hwmon2/device/in0_input:928
/sys/class/hwmon/hwmon2/device/in0_max:1744
/sys/class/hwmon/hwmon2/device/in0_min:0
/sys/class/hwmon/hwmon2/device/in10_alarm:1
/sys/class/hwmon/hwmon2/device/in10_beep:0
/sys/class/hwmon/hwmon2/device/in10_input:224
/sys/class/hwmon/hwmon2/device/in10_max:0
/sys/class/hwmon/hwmon2/device/in10_min:0
/sys/class/hwmon/hwmon2/device/in11_alarm:1
/sys/class/hwmon/hwmon2/device/in11_beep:0
/sys/class/hwmon/hwmon2/device/in11_input:200
/sys/class/hwmon/hwmon2/device/in11_max:0
/sys/class/hwmon/hwmon2/device/in11_min:0
/sys/class/hwmon/hwmon2/device/in12_alarm:1
/sys/class/hwmon/hwmon2/device/in12_beep:0
/sys/class/hwmon/hwmon2/device/in12_input:192
/sys/class/hwmon/hwmon2/device/in12_max:0
/sys/class/hwmon/hwmon2/device/in12_min:0
/sys/class/hwmon/hwmon2/device/in13_alarm:1
/sys/class/hwmon/hwmon2/device/in13_beep:0
/sys/class/hwmon/hwmon2/device/in13_input:200
/sys/class/hwmon/hwmon2/device/in13_max:0
/sys/class/hwmon/hwmon2/device/in13_min:0
/sys/class/hwmon/hwmon2/device/in14_alarm:1
/sys/class/hwmon/hwmon2/device/in14_beep:0
/sys/class/hwmon/hwmon2/device/in14_input:208
/sys/class/hwmon/hwmon2/device/in14_max:0
/sys/class/hwmon/hwmon2/device/in14_min:0
/sys/class/hwmon/hwmon2/device/in1_alarm:1
/sys/class/hwmon/hwmon2/device/in1_beep:0
/sys/class/hwmon/hwmon2/device/in1_input:984
/sys/class/hwmon/hwmon2/device/in1_max:0
/sys/class/hwmon/hwmon2/device/in1_min:0
/sys/class/hwmon/hwmon2/device/in2_alarm:1
/sys/class/hwmon/hwmon2/device/in2_beep:0
/sys/class/hwmon/hwmon2/device/in2_input:3328
/sys/class/hwmon/hwmon2/device/in2_max:0
/sys/class/hwmon/hwmon2/device/in2_min:0
/sys/class/hwmon/hwmon2/device/in3_alarm:1
/sys/class/hwmon/hwmon2/device/in3_beep:0
/sys/class/hwmon/hwmon2/device/in3_input:3312
/sys/class/hwmon/hwmon2/device/in3_max:0
/sys/class/hwmon/hwmon2/device/in3_min:0
/sys/class/hwmon/hwmon2/device/in4_alarm:1
/sys/class/hwmon/hwmon2/device/in4_beep:0
/sys/class/hwmon/hwmon2/device/in4_input:1008
/sys/class/hwmon/hwmon2/device/in4_max:0
/sys/class/hwmon/hwmon2/device/in4_min:0
/sys/class/hwmon/hwmon2/device/in5_alarm:1
/sys/class/hwmon/hwmon2/device/in5_beep:0
/sys/class/hwmon/hwmon2/device/in5_input:224
/sys/class/hwmon/hwmon2/device/in5_max:0
/sys/class/hwmon/hwmon2/device/in5_min:0
/sys/class/hwmon/hwmon2/device/in6_alarm:1
/sys/class/hwmon/hwmon2/device/in6_beep:0
/sys/class/hwmon/hwmon2/device/in6_input:944
/sys/class/hwmon/hwmon2/device/in6_max:0
/sys/class/hwmon/hwmon2/device/in6_min:0
/sys/class/hwmon/hwmon2/device/in7_alarm:1
/sys/class/hwmon/hwmon2/device/in7_beep:0
/sys/class/hwmon/hwmon2/device/in7_input:3232
/sys/class/hwmon/hwmon2/device/in7_max:0
/sys/class/hwmon/hwmon2/device/in7_min:0
/sys/class/hwmon/hwmon2/device/in8_alarm:1
/sys/class/hwmon/hwmon2/device/in8_beep:0
/sys/class/hwmon/hwmon2/device/in8_input:3264
/sys/class/hwmon/hwmon2/device/in8_max:0
/sys/class/hwmon/hwmon2/device/in8_min:0
/sys/class/hwmon/hwmon2/device/in9_alarm:1
/sys/class/hwmon/hwmon2/device/in9_beep:0
/sys/class/hwmon/hwmon2/device/in9_input:1104
/sys/class/hwmon/hwmon2/device/in9_max:0
/sys/class/hwmon/hwmon2/device/in9_min:0
/sys/class/hwmon/hwmon2/device/intrusion0_alarm:1
/sys/class/hwmon/hwmon2/device/intrusion0_beep:0
/sys/class/hwmon/hwmon2/device/intrusion1_alarm:1
/sys/class/hwmon/hwmon2/device/intrusion1_beep:0
/sys/class/hwmon/hwmon2/device/modalias:platform:nct6775
/sys/class/hwmon/hwmon2/device/name:nct6791
/sys/class/hwmon/hwmon2/device/pwm1:166
/sys/class/hwmon/hwmon2/device/pwm1_auto_point1_pwm:153
/sys/class/hwmon/hwmon2/device/pwm1_auto_point1_temp:30000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point2_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point2_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm1_enable:5
/sys/class/hwmon/hwmon2/device/pwm1_floor:1
/sys/class/hwmon/hwmon2/device/pwm1_mode:1
/sys/class/hwmon/hwmon2/device/pwm1_start:1
/sys/class/hwmon/hwmon2/device/pwm1_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm1_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm1_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm1_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm1_temp_sel:7
/sys/class/hwmon/hwmon2/device/pwm1_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm1_weight_duty_base:255
/sys/class/hwmon/hwmon2/device/pwm1_weight_duty_step:255
/sys/class/hwmon/hwmon2/device/pwm1_weight_temp_sel:0
/sys/class/hwmon/hwmon2/device/pwm1_weight_temp_step:255000
/sys/class/hwmon/hwmon2/device/pwm1_weight_temp_step_base:255000
/sys/class/hwmon/hwmon2/device/pwm1_weight_temp_step_tol:255000
/sys/class/hwmon/hwmon2/device/pwm2:0
/sys/class/hwmon/hwmon2/device/pwm2_auto_point1_pwm:51
/sys/class/hwmon/hwmon2/device/pwm2_auto_point1_temp:20000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point2_pwm:178
/sys/class/hwmon/hwmon2/device/pwm2_auto_point2_temp:70000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm2_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm2_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm2_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm2_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm2_enable:1
/sys/class/hwmon/hwmon2/device/pwm2_floor:1
/sys/class/hwmon/hwmon2/device/pwm2_mode:1
/sys/class/hwmon/hwmon2/device/pwm2_start:1
/sys/class/hwmon/hwmon2/device/pwm2_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm2_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm2_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm2_target_temp:50000
/sys/class/hwmon/hwmon2/device/pwm2_temp_sel:7
/sys/class/hwmon/hwmon2/device/pwm2_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_duty_base:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_duty_step:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_sel:1
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_step:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_step_base:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_step_tol:0
/sys/class/hwmon/hwmon2/device/pwm3:166
/sys/class/hwmon/hwmon2/device/pwm3_auto_point1_pwm:153
/sys/class/hwmon/hwmon2/device/pwm3_auto_point1_temp:30000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point2_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point2_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm3_enable:5
/sys/class/hwmon/hwmon2/device/pwm3_floor:1
/sys/class/hwmon/hwmon2/device/pwm3_mode:1
/sys/class/hwmon/hwmon2/device/pwm3_start:1
/sys/class/hwmon/hwmon2/device/pwm3_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm3_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm3_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm3_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm3_temp_sel:7
/sys/class/hwmon/hwmon2/device/pwm3_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm3_weight_duty_base:255
/sys/class/hwmon/hwmon2/device/pwm3_weight_duty_step:255
/sys/class/hwmon/hwmon2/device/pwm3_weight_temp_sel:0
/sys/class/hwmon/hwmon2/device/pwm3_weight_temp_step:255000
/sys/class/hwmon/hwmon2/device/pwm3_weight_temp_step_base:255000
/sys/class/hwmon/hwmon2/device/pwm3_weight_temp_step_tol:255000
/sys/class/hwmon/hwmon2/device/pwm4:166
/sys/class/hwmon/hwmon2/device/pwm4_auto_point1_pwm:153
/sys/class/hwmon/hwmon2/device/pwm4_auto_point1_temp:30000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point2_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point2_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm4_enable:5
/sys/class/hwmon/hwmon2/device/pwm4_floor:1
/sys/class/hwmon/hwmon2/device/pwm4_mode:1
/sys/class/hwmon/hwmon2/device/pwm4_start:1
/sys/class/hwmon/hwmon2/device/pwm4_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm4_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm4_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm4_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm4_temp_sel:7
/sys/class/hwmon/hwmon2/device/pwm4_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm4_weight_duty_base:255
/sys/class/hwmon/hwmon2/device/pwm4_weight_duty_step:255
/sys/class/hwmon/hwmon2/device/pwm4_weight_temp_sel:0
/sys/class/hwmon/hwmon2/device/pwm4_weight_temp_step:255000
/sys/class/hwmon/hwmon2/device/pwm4_weight_temp_step_base:255000
/sys/class/hwmon/hwmon2/device/pwm4_weight_temp_step_tol:255000
/sys/class/hwmon/hwmon2/device/pwm5:255
/sys/class/hwmon/hwmon2/device/pwm5_auto_point1_pwm:140
/sys/class/hwmon/hwmon2/device/pwm5_auto_point1_temp:25000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point2_pwm:170
/sys/class/hwmon/hwmon2/device/pwm5_auto_point2_temp:35000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point3_pwm:200
/sys/class/hwmon/hwmon2/device/pwm5_auto_point3_temp:45000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point4_pwm:230
/sys/class/hwmon/hwmon2/device/pwm5_auto_point4_temp:55000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm5_auto_point5_temp:60000
/sys/class/hwmon/hwmon2/device/pwm5_crit_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm5_enable:0
/sys/class/hwmon/hwmon2/device/pwm5_floor:1
/sys/class/hwmon/hwmon2/device/pwm5_mode:1
/sys/class/hwmon/hwmon2/device/pwm5_start:1
/sys/class/hwmon/hwmon2/device/pwm5_step_down_time:1000
/sys/class/hwmon/hwmon2/device/pwm5_step_up_time:1000
/sys/class/hwmon/hwmon2/device/pwm5_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm5_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm5_temp_sel:3
/sys/class/hwmon/hwmon2/device/pwm5_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm5_weight_duty_base:255
/sys/class/hwmon/hwmon2/device/pwm5_weight_duty_step:255
/sys/class/hwmon/hwmon2/device/pwm5_weight_temp_sel:0
/sys/class/hwmon/hwmon2/device/pwm5_weight_temp_step:255000
/sys/class/hwmon/hwmon2/device/pwm5_weight_temp_step_base:255000
/sys/class/hwmon/hwmon2/device/pwm5_weight_temp_step_tol:255000
/sys/class/hwmon/hwmon2/device/temp10_input:0
/sys/class/hwmon/hwmon2/device/temp10_label:PCH_CPU_TEMP
/sys/class/hwmon/hwmon2/device/temp1_input:100000
/sys/class/hwmon/hwmon2/device/temp1_label:SYSTIN
/sys/class/hwmon/hwmon2/device/temp1_max:0
/sys/class/hwmon/hwmon2/device/temp1_max_hyst:0
/sys/class/hwmon/hwmon2/device/temp1_offset:0
/sys/class/hwmon/hwmon2/device/temp1_type:4
/sys/class/hwmon/hwmon2/device/temp2_alarm:0
/sys/class/hwmon/hwmon2/device/temp2_beep:0
/sys/class/hwmon/hwmon2/device/temp2_input:37000
/sys/class/hwmon/hwmon2/device/temp2_label:CPUTIN
/sys/class/hwmon/hwmon2/device/temp2_max:80000
/sys/class/hwmon/hwmon2/device/temp2_max_hyst:75000
/sys/class/hwmon/hwmon2/device/temp2_offset:0
/sys/class/hwmon/hwmon2/device/temp2_type:4
/sys/class/hwmon/hwmon2/device/temp3_alarm:1
/sys/class/hwmon/hwmon2/device/temp3_beep:0
/sys/class/hwmon/hwmon2/device/temp3_input:29000
/sys/class/hwmon/hwmon2/device/temp3_label:AUXTIN0
/sys/class/hwmon/hwmon2/device/temp3_max:0
/sys/class/hwmon/hwmon2/device/temp3_max_hyst:0
/sys/class/hwmon/hwmon2/device/temp3_offset:0
/sys/class/hwmon/hwmon2/device/temp3_type:4
/sys/class/hwmon/hwmon2/device/temp4_input:93000
/sys/class/hwmon/hwmon2/device/temp4_label:AUXTIN1
/sys/class/hwmon/hwmon2/device/temp4_offset:0
/sys/class/hwmon/hwmon2/device/temp4_type:4
/sys/class/hwmon/hwmon2/device/temp5_input:91000
/sys/class/hwmon/hwmon2/device/temp5_label:AUXTIN2
/sys/class/hwmon/hwmon2/device/temp5_offset:0
/sys/class/hwmon/hwmon2/device/temp5_type:4
/sys/class/hwmon/hwmon2/device/temp6_input:91000
/sys/class/hwmon/hwmon2/device/temp6_label:AUXTIN3
/sys/class/hwmon/hwmon2/device/temp6_offset:0
/sys/class/hwmon/hwmon2/device/temp6_type:4
/sys/class/hwmon/hwmon2/device/temp7_input:36000
/sys/class/hwmon/hwmon2/device/temp7_label:PECI Agent 0
/sys/class/hwmon/hwmon2/device/temp8_input:0
/sys/class/hwmon/hwmon2/device/temp8_label:PCH_CHIP_CPU_MAX_TEMP
/sys/class/hwmon/hwmon2/device/temp9_input:0
/sys/class/hwmon/hwmon2/device/temp9_label:PCH_CHIP_TEMP
/sys/class/hwmon/hwmon2/device/uevent:DRIVER=nct6775
/sys/class/hwmon/hwmon2/device/uevent:MODALIAS=platform:nct6775
[-- Attachment #3: Type: text/plain, Size: 153 bytes --]
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (35 preceding siblings ...)
2013-11-13 5:17 ` p. stephen w
@ 2013-11-13 6:16 ` Guenter Roeck
2013-11-13 7:01 ` p. stephen w
` (7 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: Guenter Roeck @ 2013-11-13 6:16 UTC (permalink / raw)
To: lm-sensors
On 11/12/2013 09:17 PM, p. stephen w wrote:
> Good to know.
> Please see the attached.
>
>
Much better.
Can you try again ? I added another fix (hope I got it right ;-).
Thanks,
Guenter
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (36 preceding siblings ...)
2013-11-13 6:16 ` Guenter Roeck
@ 2013-11-13 7:01 ` p. stephen w
2013-11-13 14:26 ` Guenter Roeck
` (6 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: p. stephen w @ 2013-11-13 7:01 UTC (permalink / raw)
To: lm-sensors
[-- Attachment #1: Type: text/plain, Size: 453 bytes --]
No prob. See attached.
On Tue, Nov 12, 2013 at 10:16 PM, Guenter Roeck <linux@roeck-us.net> wrote:
> On 11/12/2013 09:17 PM, p. stephen w wrote:
>
>> Good to know.
>> Please see the attached.
>>
>>
>> Much better.
>
> Can you try again ? I added another fix (hope I got it right ;-).
>
> Thanks,
> Guenter
>
>
--
_____________________________
Stephen Wille | pstephenwille.com
*new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: newNCT6775readings.b.txt --]
[-- Type: text/plain; charset=US-ASCII; name="newNCT6775readings.b.txt", Size: 17699 bytes --]
acpitz-virtual-0
Adapter: Virtual device
temp1: +27.8°C (crit = +105.0°C)
temp2: +29.8°C (crit = +105.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +34.0°C (high = +80.0°C, crit = +100.0°C)
Core 0: +31.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +30.0°C (high = +80.0°C, crit = +100.0°C)
Core 2: +34.0°C (high = +80.0°C, crit = +100.0°C)
Core 3: +29.0°C (high = +80.0°C, crit = +100.0°C)
nct6791-isa-0290
Adapter: ISA adapter
in0: +0.93 V (min = +0.00 V, max = +1.74 V)
in1: +0.98 V (min = +0.00 V, max = +0.00 V) ALARM
in2: +3.33 V (min = +0.00 V, max = +0.00 V) ALARM
in3: +3.31 V (min = +0.00 V, max = +0.00 V) ALARM
in4: +1.01 V (min = +0.00 V, max = +0.00 V) ALARM
in5: +0.21 V (min = +0.00 V, max = +0.00 V) ALARM
in6: +0.94 V (min = +0.00 V, max = +0.00 V) ALARM
in7: +3.23 V (min = +0.00 V, max = +0.00 V) ALARM
in8: +3.26 V (min = +0.00 V, max = +0.00 V) ALARM
in9: +1.10 V (min = +0.00 V, max = +0.00 V) ALARM
in10: +0.21 V (min = +0.00 V, max = +0.00 V) ALARM
in11: +0.18 V (min = +0.00 V, max = +0.00 V) ALARM
in12: +0.18 V (min = +0.00 V, max = +0.00 V) ALARM
in13: +0.18 V (min = +0.00 V, max = +0.00 V) ALARM
in14: +0.18 V (min = +0.00 V, max = +0.00 V) ALARM
fan1: 917 RPM (min = 0 RPM)
fan2: 1193 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
SYSTIN: +104.0°C (high = +0.0°C, hyst = +0.0°C) sensor = thermistor
CPUTIN: +34.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
AUXTIN0: +29.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = thermistor
AUXTIN1: +96.0°C sensor = thermistor
AUXTIN2: +96.0°C sensor = thermistor
AUXTIN3: +95.0°C sensor = thermistor
PECI Agent 0: +33.0°C
PCH_CHIP_CPU_MAX_TEMP: +0.0°C
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
intrusion0: ALARM
intrusion1: ALARM
beep_enable: disabled
================
/sys/class/hwmon/hwmon2/device/beep_enable:0
/sys/class/hwmon/hwmon2/device/fan1_alarm:0
/sys/class/hwmon/hwmon2/device/fan1_beep:0
/sys/class/hwmon/hwmon2/device/fan1_input:924
/sys/class/hwmon/hwmon2/device/fan1_min:0
/sys/class/hwmon/hwmon2/device/fan1_pulses:2
/sys/class/hwmon/hwmon2/device/fan1_target:0
/sys/class/hwmon/hwmon2/device/fan1_tolerance:0
/sys/class/hwmon/hwmon2/device/fan2_alarm:0
/sys/class/hwmon/hwmon2/device/fan2_beep:0
/sys/class/hwmon/hwmon2/device/fan2_input:1207
/sys/class/hwmon/hwmon2/device/fan2_min:0
/sys/class/hwmon/hwmon2/device/fan2_pulses:2
/sys/class/hwmon/hwmon2/device/fan2_target:27000
/sys/class/hwmon/hwmon2/device/fan2_tolerance:0
/sys/class/hwmon/hwmon2/device/fan3_alarm:0
/sys/class/hwmon/hwmon2/device/fan3_beep:0
/sys/class/hwmon/hwmon2/device/fan3_input:0
/sys/class/hwmon/hwmon2/device/fan3_min:0
/sys/class/hwmon/hwmon2/device/fan3_pulses:2
/sys/class/hwmon/hwmon2/device/fan3_target:0
/sys/class/hwmon/hwmon2/device/fan3_tolerance:0
/sys/class/hwmon/hwmon2/device/fan4_alarm:0
/sys/class/hwmon/hwmon2/device/fan4_beep:0
/sys/class/hwmon/hwmon2/device/fan4_input:0
/sys/class/hwmon/hwmon2/device/fan4_min:0
/sys/class/hwmon/hwmon2/device/fan4_pulses:2
/sys/class/hwmon/hwmon2/device/fan4_target:0
/sys/class/hwmon/hwmon2/device/fan4_tolerance:0
/sys/class/hwmon/hwmon2/device/fan5_alarm:0
/sys/class/hwmon/hwmon2/device/fan5_beep:0
/sys/class/hwmon/hwmon2/device/fan5_input:0
/sys/class/hwmon/hwmon2/device/fan5_min:0
/sys/class/hwmon/hwmon2/device/fan5_pulses:2
/sys/class/hwmon/hwmon2/device/fan5_target:0
/sys/class/hwmon/hwmon2/device/fan5_tolerance:0
/sys/class/hwmon/hwmon2/device/in0_alarm:0
/sys/class/hwmon/hwmon2/device/in0_beep:0
/sys/class/hwmon/hwmon2/device/in0_input:928
/sys/class/hwmon/hwmon2/device/in0_max:1744
/sys/class/hwmon/hwmon2/device/in0_min:0
/sys/class/hwmon/hwmon2/device/in10_alarm:1
/sys/class/hwmon/hwmon2/device/in10_beep:0
/sys/class/hwmon/hwmon2/device/in10_input:208
/sys/class/hwmon/hwmon2/device/in10_max:0
/sys/class/hwmon/hwmon2/device/in10_min:0
/sys/class/hwmon/hwmon2/device/in11_alarm:1
/sys/class/hwmon/hwmon2/device/in11_beep:0
/sys/class/hwmon/hwmon2/device/in11_input:184
/sys/class/hwmon/hwmon2/device/in11_max:0
/sys/class/hwmon/hwmon2/device/in11_min:0
/sys/class/hwmon/hwmon2/device/in12_alarm:1
/sys/class/hwmon/hwmon2/device/in12_beep:0
/sys/class/hwmon/hwmon2/device/in12_input:176
/sys/class/hwmon/hwmon2/device/in12_max:0
/sys/class/hwmon/hwmon2/device/in12_min:0
/sys/class/hwmon/hwmon2/device/in13_alarm:1
/sys/class/hwmon/hwmon2/device/in13_beep:0
/sys/class/hwmon/hwmon2/device/in13_input:176
/sys/class/hwmon/hwmon2/device/in13_max:0
/sys/class/hwmon/hwmon2/device/in13_min:0
/sys/class/hwmon/hwmon2/device/in14_alarm:1
/sys/class/hwmon/hwmon2/device/in14_beep:0
/sys/class/hwmon/hwmon2/device/in14_input:184
/sys/class/hwmon/hwmon2/device/in14_max:0
/sys/class/hwmon/hwmon2/device/in14_min:0
/sys/class/hwmon/hwmon2/device/in1_alarm:1
/sys/class/hwmon/hwmon2/device/in1_beep:0
/sys/class/hwmon/hwmon2/device/in1_input:984
/sys/class/hwmon/hwmon2/device/in1_max:0
/sys/class/hwmon/hwmon2/device/in1_min:0
/sys/class/hwmon/hwmon2/device/in2_alarm:1
/sys/class/hwmon/hwmon2/device/in2_beep:0
/sys/class/hwmon/hwmon2/device/in2_input:3312
/sys/class/hwmon/hwmon2/device/in2_max:0
/sys/class/hwmon/hwmon2/device/in2_min:0
/sys/class/hwmon/hwmon2/device/in3_alarm:1
/sys/class/hwmon/hwmon2/device/in3_beep:0
/sys/class/hwmon/hwmon2/device/in3_input:3312
/sys/class/hwmon/hwmon2/device/in3_max:0
/sys/class/hwmon/hwmon2/device/in3_min:0
/sys/class/hwmon/hwmon2/device/in4_alarm:1
/sys/class/hwmon/hwmon2/device/in4_beep:0
/sys/class/hwmon/hwmon2/device/in4_input:1008
/sys/class/hwmon/hwmon2/device/in4_max:0
/sys/class/hwmon/hwmon2/device/in4_min:0
/sys/class/hwmon/hwmon2/device/in5_alarm:1
/sys/class/hwmon/hwmon2/device/in5_beep:0
/sys/class/hwmon/hwmon2/device/in5_input:208
/sys/class/hwmon/hwmon2/device/in5_max:0
/sys/class/hwmon/hwmon2/device/in5_min:0
/sys/class/hwmon/hwmon2/device/in6_alarm:1
/sys/class/hwmon/hwmon2/device/in6_beep:0
/sys/class/hwmon/hwmon2/device/in6_input:944
/sys/class/hwmon/hwmon2/device/in6_max:0
/sys/class/hwmon/hwmon2/device/in6_min:0
/sys/class/hwmon/hwmon2/device/in7_alarm:1
/sys/class/hwmon/hwmon2/device/in7_beep:0
/sys/class/hwmon/hwmon2/device/in7_input:3232
/sys/class/hwmon/hwmon2/device/in7_max:0
/sys/class/hwmon/hwmon2/device/in7_min:0
/sys/class/hwmon/hwmon2/device/in8_alarm:1
/sys/class/hwmon/hwmon2/device/in8_beep:0
/sys/class/hwmon/hwmon2/device/in8_input:3264
/sys/class/hwmon/hwmon2/device/in8_max:0
/sys/class/hwmon/hwmon2/device/in8_min:0
/sys/class/hwmon/hwmon2/device/in9_alarm:1
/sys/class/hwmon/hwmon2/device/in9_beep:0
/sys/class/hwmon/hwmon2/device/in9_input:1104
/sys/class/hwmon/hwmon2/device/in9_max:0
/sys/class/hwmon/hwmon2/device/in9_min:0
/sys/class/hwmon/hwmon2/device/intrusion0_alarm:1
/sys/class/hwmon/hwmon2/device/intrusion0_beep:0
/sys/class/hwmon/hwmon2/device/intrusion1_alarm:1
/sys/class/hwmon/hwmon2/device/intrusion1_beep:0
/sys/class/hwmon/hwmon2/device/modalias:platform:nct6775
/sys/class/hwmon/hwmon2/device/name:nct6791
/sys/class/hwmon/hwmon2/device/pwm1:159
/sys/class/hwmon/hwmon2/device/pwm1_auto_point1_pwm:153
/sys/class/hwmon/hwmon2/device/pwm1_auto_point1_temp:30000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point2_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point2_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm1_enable:5
/sys/class/hwmon/hwmon2/device/pwm1_floor:1
/sys/class/hwmon/hwmon2/device/pwm1_mode:1
/sys/class/hwmon/hwmon2/device/pwm1_start:1
/sys/class/hwmon/hwmon2/device/pwm1_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm1_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm1_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm1_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm1_temp_sel:7
/sys/class/hwmon/hwmon2/device/pwm1_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm1_weight_duty_base:255
/sys/class/hwmon/hwmon2/device/pwm1_weight_duty_step:255
/sys/class/hwmon/hwmon2/device/pwm1_weight_temp_sel:0
/sys/class/hwmon/hwmon2/device/pwm1_weight_temp_step:255000
/sys/class/hwmon/hwmon2/device/pwm1_weight_temp_step_base:255000
/sys/class/hwmon/hwmon2/device/pwm1_weight_temp_step_tol:255000
/sys/class/hwmon/hwmon2/device/pwm2:0
/sys/class/hwmon/hwmon2/device/pwm2_auto_point1_pwm:51
/sys/class/hwmon/hwmon2/device/pwm2_auto_point1_temp:20000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point2_pwm:178
/sys/class/hwmon/hwmon2/device/pwm2_auto_point2_temp:70000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm2_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm2_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm2_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm2_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm2_enable:1
/sys/class/hwmon/hwmon2/device/pwm2_floor:1
/sys/class/hwmon/hwmon2/device/pwm2_mode:1
/sys/class/hwmon/hwmon2/device/pwm2_start:1
/sys/class/hwmon/hwmon2/device/pwm2_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm2_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm2_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm2_target_temp:50000
/sys/class/hwmon/hwmon2/device/pwm2_temp_sel:7
/sys/class/hwmon/hwmon2/device/pwm2_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_duty_base:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_duty_step:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_sel:1
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_step:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_step_base:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_step_tol:0
/sys/class/hwmon/hwmon2/device/pwm3:159
/sys/class/hwmon/hwmon2/device/pwm3_auto_point1_pwm:153
/sys/class/hwmon/hwmon2/device/pwm3_auto_point1_temp:30000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point2_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point2_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm3_enable:5
/sys/class/hwmon/hwmon2/device/pwm3_floor:1
/sys/class/hwmon/hwmon2/device/pwm3_mode:1
/sys/class/hwmon/hwmon2/device/pwm3_start:1
/sys/class/hwmon/hwmon2/device/pwm3_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm3_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm3_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm3_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm3_temp_sel:7
/sys/class/hwmon/hwmon2/device/pwm3_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm3_weight_duty_base:255
/sys/class/hwmon/hwmon2/device/pwm3_weight_duty_step:255
/sys/class/hwmon/hwmon2/device/pwm3_weight_temp_sel:0
/sys/class/hwmon/hwmon2/device/pwm3_weight_temp_step:255000
/sys/class/hwmon/hwmon2/device/pwm3_weight_temp_step_base:255000
/sys/class/hwmon/hwmon2/device/pwm3_weight_temp_step_tol:255000
/sys/class/hwmon/hwmon2/device/pwm4:159
/sys/class/hwmon/hwmon2/device/pwm4_auto_point1_pwm:153
/sys/class/hwmon/hwmon2/device/pwm4_auto_point1_temp:30000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point2_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point2_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm4_enable:5
/sys/class/hwmon/hwmon2/device/pwm4_floor:1
/sys/class/hwmon/hwmon2/device/pwm4_mode:1
/sys/class/hwmon/hwmon2/device/pwm4_start:1
/sys/class/hwmon/hwmon2/device/pwm4_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm4_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm4_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm4_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm4_temp_sel:7
/sys/class/hwmon/hwmon2/device/pwm4_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm4_weight_duty_base:255
/sys/class/hwmon/hwmon2/device/pwm4_weight_duty_step:255
/sys/class/hwmon/hwmon2/device/pwm4_weight_temp_sel:0
/sys/class/hwmon/hwmon2/device/pwm4_weight_temp_step:255000
/sys/class/hwmon/hwmon2/device/pwm4_weight_temp_step_base:255000
/sys/class/hwmon/hwmon2/device/pwm4_weight_temp_step_tol:255000
/sys/class/hwmon/hwmon2/device/pwm5:255
/sys/class/hwmon/hwmon2/device/pwm5_auto_point1_pwm:140
/sys/class/hwmon/hwmon2/device/pwm5_auto_point1_temp:25000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point2_pwm:170
/sys/class/hwmon/hwmon2/device/pwm5_auto_point2_temp:35000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point3_pwm:200
/sys/class/hwmon/hwmon2/device/pwm5_auto_point3_temp:45000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point4_pwm:230
/sys/class/hwmon/hwmon2/device/pwm5_auto_point4_temp:55000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm5_auto_point5_temp:60000
/sys/class/hwmon/hwmon2/device/pwm5_crit_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm5_enable:0
/sys/class/hwmon/hwmon2/device/pwm5_floor:1
/sys/class/hwmon/hwmon2/device/pwm5_mode:1
/sys/class/hwmon/hwmon2/device/pwm5_start:1
/sys/class/hwmon/hwmon2/device/pwm5_step_down_time:1000
/sys/class/hwmon/hwmon2/device/pwm5_step_up_time:1000
/sys/class/hwmon/hwmon2/device/pwm5_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm5_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm5_temp_sel:3
/sys/class/hwmon/hwmon2/device/pwm5_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm5_weight_duty_base:255
/sys/class/hwmon/hwmon2/device/pwm5_weight_duty_step:255
/sys/class/hwmon/hwmon2/device/pwm5_weight_temp_sel:0
/sys/class/hwmon/hwmon2/device/pwm5_weight_temp_step:255000
/sys/class/hwmon/hwmon2/device/pwm5_weight_temp_step_base:255000
/sys/class/hwmon/hwmon2/device/pwm5_weight_temp_step_tol:255000
/sys/class/hwmon/hwmon2/device/temp10_input:0
/sys/class/hwmon/hwmon2/device/temp10_label:PCH_CPU_TEMP
/sys/class/hwmon/hwmon2/device/temp1_input:103000
/sys/class/hwmon/hwmon2/device/temp1_label:SYSTIN
/sys/class/hwmon/hwmon2/device/temp1_max:0
/sys/class/hwmon/hwmon2/device/temp1_max_hyst:0
/sys/class/hwmon/hwmon2/device/temp1_offset:0
/sys/class/hwmon/hwmon2/device/temp1_type:4
/sys/class/hwmon/hwmon2/device/temp2_alarm:0
/sys/class/hwmon/hwmon2/device/temp2_beep:0
/sys/class/hwmon/hwmon2/device/temp2_input:34500
/sys/class/hwmon/hwmon2/device/temp2_label:CPUTIN
/sys/class/hwmon/hwmon2/device/temp2_max:80000
/sys/class/hwmon/hwmon2/device/temp2_max_hyst:75000
/sys/class/hwmon/hwmon2/device/temp2_offset:0
/sys/class/hwmon/hwmon2/device/temp2_type:4
/sys/class/hwmon/hwmon2/device/temp3_alarm:1
/sys/class/hwmon/hwmon2/device/temp3_beep:0
/sys/class/hwmon/hwmon2/device/temp3_input:29000
/sys/class/hwmon/hwmon2/device/temp3_label:AUXTIN0
/sys/class/hwmon/hwmon2/device/temp3_max:0
/sys/class/hwmon/hwmon2/device/temp3_max_hyst:0
/sys/class/hwmon/hwmon2/device/temp3_offset:0
/sys/class/hwmon/hwmon2/device/temp3_type:4
/sys/class/hwmon/hwmon2/device/temp4_input:96000
/sys/class/hwmon/hwmon2/device/temp4_label:AUXTIN1
/sys/class/hwmon/hwmon2/device/temp4_offset:0
/sys/class/hwmon/hwmon2/device/temp4_type:4
/sys/class/hwmon/hwmon2/device/temp5_input:96000
/sys/class/hwmon/hwmon2/device/temp5_label:AUXTIN2
/sys/class/hwmon/hwmon2/device/temp5_offset:0
/sys/class/hwmon/hwmon2/device/temp5_type:4
/sys/class/hwmon/hwmon2/device/temp6_input:95000
/sys/class/hwmon/hwmon2/device/temp6_label:AUXTIN3
/sys/class/hwmon/hwmon2/device/temp6_offset:0
/sys/class/hwmon/hwmon2/device/temp6_type:4
/sys/class/hwmon/hwmon2/device/temp7_input:33500
/sys/class/hwmon/hwmon2/device/temp7_label:PECI Agent 0
/sys/class/hwmon/hwmon2/device/temp8_input:0
/sys/class/hwmon/hwmon2/device/temp8_label:PCH_CHIP_CPU_MAX_TEMP
/sys/class/hwmon/hwmon2/device/temp9_input:0
/sys/class/hwmon/hwmon2/device/temp9_label:PCH_CHIP_TEMP
/sys/class/hwmon/hwmon2/device/uevent:DRIVER=nct6775
/sys/class/hwmon/hwmon2/device/uevent:MODALIAS=platform:nct6775
[-- Attachment #3: Type: text/plain, Size: 153 bytes --]
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (37 preceding siblings ...)
2013-11-13 7:01 ` p. stephen w
@ 2013-11-13 14:26 ` Guenter Roeck
2013-11-13 17:33 ` Guenter Roeck
` (5 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: Guenter Roeck @ 2013-11-13 14:26 UTC (permalink / raw)
To: lm-sensors
On 11/12/2013 11:01 PM, p. stephen w wrote:
> No prob. See attached.
>
>
> On Tue, Nov 12, 2013 at 10:16 PM, Guenter Roeck <linux@roeck-us.net <mailto:linux@roeck-us.net>> wrote:
>
> On 11/12/2013 09:17 PM, p. stephen w wrote:
>
> Good to know.
> Please see the attached.
>
>
> Much better.
>
> Can you try again ? I added another fix (hope I got it right ;-).
>
Are you sure you ran 'modprobe -r' ?
Thanks,
Guenter
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (38 preceding siblings ...)
2013-11-13 14:26 ` Guenter Roeck
@ 2013-11-13 17:33 ` Guenter Roeck
2013-11-13 17:37 ` p. stephen w
` (4 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: Guenter Roeck @ 2013-11-13 17:33 UTC (permalink / raw)
To: lm-sensors
On Tue, Nov 12, 2013 at 11:01:44PM -0800, p. stephen w wrote:
> No prob. See attached.
>
Hi,
[ not sure if I actually sent my prevous response. Too early in the morning ;-). ]
First of all, thanks a lot for testing. For some reason, the output is the same
as before. Yet, the latest driver version should only create the "pwm*weight"
attributes for pwm2. So I wonder - is it possible that you did not unload the
old driver version with "modprobe -r" before loading the new version ?
Thanks,
Guenter
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (39 preceding siblings ...)
2013-11-13 17:33 ` Guenter Roeck
@ 2013-11-13 17:37 ` p. stephen w
2013-11-13 17:40 ` p. stephen w
` (3 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: p. stephen w @ 2013-11-13 17:37 UTC (permalink / raw)
To: lm-sensors
[-- Attachment #1: Type: text/plain, Size: 924 bytes --]
I'm pretty sure I did, but just in case I re-ran the install. The attached
includes the commands as I ran them, plus pre and post boot sensor/hwmon
info.
Let me know.
On Wed, Nov 13, 2013 at 9:33 AM, Guenter Roeck <linux@roeck-us.net> wrote:
> On Tue, Nov 12, 2013 at 11:01:44PM -0800, p. stephen w wrote:
> > No prob. See attached.
> >
> Hi,
>
> [ not sure if I actually sent my prevous response. Too early in the
> morning ;-). ]
>
> First of all, thanks a lot for testing. For some reason, the output is the
> same
> as before. Yet, the latest driver version should only create the
> "pwm*weight"
> attributes for pwm2. So I wonder - is it possible that you did not unload
> the
> old driver version with "modprobe -r" before loading the new version ?
>
> Thanks,
> Guenter
>
--
_____________________________
Stephen Wille | pstephenwille.com
*new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
[-- Attachment #2: newNCT6775readings.c.txt --]
[-- Type: text/plain, Size: 33448 bytes --]
git clone https://github.com/groeck/nct6775.git
grep . /sys/class/hwmon/hwmon2/device/*
Mint Downloads # modprobe -r nct6775
Mint Downloads # rm -rf nct6775
Mint Downloads # git clone https://github.com/groeck/nct6775.git
Cloning into 'nct6775'...
remote: Counting objects: 299, done.
remote: Compressing objects: 100% (147/147), done.
remote: Total 299 (delta 174), reused 268 (delta 152)
Receiving objects: 100% (299/299), 152.25 KiB, done.
Resolving deltas: 100% (174/174), done.
Mint nct6775 # make all
CC [M] /home/stephen/Downloads/nct6775/nct6775.o
Building modules, stage 2.
MODPOST 1 modules
CC /home/stephen/Downloads/nct6775/nct6775.mod.o
LD [M] /home/stephen/Downloads/nct6775/nct6775.ko
Mint nct6775 # make install
cp nct6775.ko /lib/modules/3.8.0-19-generic/kernel/drivers/hwmon
depmod -a -F /boot/System.map-3.8.0-19-generic 3.8.0-19-generic
==============
PRE BOOT
acpitz-virtual-0
Adapter: Virtual device
temp1: +27.8°C (crit = +105.0°C)
temp2: +29.8°C (crit = +105.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +47.0°C (high = +80.0°C, crit = +100.0°C)
Core 0: +47.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +34.0°C (high = +80.0°C, crit = +100.0°C)
Core 2: +34.0°C (high = +80.0°C, crit = +100.0°C)
Core 3: +28.0°C (high = +80.0°C, crit = +100.0°C)
nct6791-isa-0290
Adapter: ISA adapter
in0: +0.93 V (min = +0.00 V, max = +1.74 V)
in1: +0.98 V (min = +0.00 V, max = +0.00 V) ALARM
in2: +3.33 V (min = +0.00 V, max = +0.00 V) ALARM
in3: +3.31 V (min = +0.00 V, max = +0.00 V) ALARM
in4: +1.01 V (min = +0.00 V, max = +0.00 V) ALARM
in5: +0.19 V (min = +0.00 V, max = +0.00 V) ALARM
in6: +0.99 V (min = +0.00 V, max = +0.00 V) ALARM
in7: +3.23 V (min = +0.00 V, max = +0.00 V) ALARM
in8: +3.26 V (min = +0.00 V, max = +0.00 V) ALARM
in9: +1.11 V (min = +0.00 V, max = +0.00 V) ALARM
in10: +0.19 V (min = +0.00 V, max = +0.00 V) ALARM
in11: +0.17 V (min = +0.00 V, max = +0.00 V) ALARM
in12: +0.16 V (min = +0.00 V, max = +0.00 V) ALARM
in13: +0.16 V (min = +0.00 V, max = +0.00 V) ALARM
in14: +0.17 V (min = +0.00 V, max = +0.00 V) ALARM
fan1: 1122 RPM (min = 0 RPM)
fan2: 1214 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
SYSTIN: +107.0°C (high = +0.0°C, hyst = +0.0°C) sensor = thermistor
CPUTIN: +31.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
AUXTIN0: +27.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = thermistor
AUXTIN1: +100.0°C sensor = thermistor
AUXTIN2: +99.0°C sensor = thermistor
AUXTIN3: +99.0°C sensor = thermistor
PECI Agent 0: +47.0°C
PCH_CHIP_CPU_MAX_TEMP: +0.0°C
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
intrusion0: ALARM
intrusion1: ALARM
beep_enable: disabled
/sys/class/hwmon/hwmon2/device/beep_enable:0
/sys/class/hwmon/hwmon2/device/fan1_alarm:0
/sys/class/hwmon/hwmon2/device/fan1_beep:0
/sys/class/hwmon/hwmon2/device/fan1_input:903
/sys/class/hwmon/hwmon2/device/fan1_min:0
/sys/class/hwmon/hwmon2/device/fan1_pulses:2
/sys/class/hwmon/hwmon2/device/fan1_target:0
/sys/class/hwmon/hwmon2/device/fan1_tolerance:0
/sys/class/hwmon/hwmon2/device/fan2_alarm:0
/sys/class/hwmon/hwmon2/device/fan2_beep:0
/sys/class/hwmon/hwmon2/device/fan2_input:1214
/sys/class/hwmon/hwmon2/device/fan2_min:0
/sys/class/hwmon/hwmon2/device/fan2_pulses:2
/sys/class/hwmon/hwmon2/device/fan2_target:27000
/sys/class/hwmon/hwmon2/device/fan2_tolerance:0
/sys/class/hwmon/hwmon2/device/fan3_alarm:0
/sys/class/hwmon/hwmon2/device/fan3_beep:0
/sys/class/hwmon/hwmon2/device/fan3_input:0
/sys/class/hwmon/hwmon2/device/fan3_min:0
/sys/class/hwmon/hwmon2/device/fan3_pulses:2
/sys/class/hwmon/hwmon2/device/fan3_target:0
/sys/class/hwmon/hwmon2/device/fan3_tolerance:0
/sys/class/hwmon/hwmon2/device/fan4_alarm:0
/sys/class/hwmon/hwmon2/device/fan4_beep:0
/sys/class/hwmon/hwmon2/device/fan4_input:0
/sys/class/hwmon/hwmon2/device/fan4_min:0
/sys/class/hwmon/hwmon2/device/fan4_pulses:2
/sys/class/hwmon/hwmon2/device/fan4_target:0
/sys/class/hwmon/hwmon2/device/fan4_tolerance:0
/sys/class/hwmon/hwmon2/device/fan5_alarm:0
/sys/class/hwmon/hwmon2/device/fan5_beep:0
/sys/class/hwmon/hwmon2/device/fan5_input:0
/sys/class/hwmon/hwmon2/device/fan5_min:0
/sys/class/hwmon/hwmon2/device/fan5_pulses:2
/sys/class/hwmon/hwmon2/device/fan5_target:0
/sys/class/hwmon/hwmon2/device/fan5_tolerance:0
/sys/class/hwmon/hwmon2/device/in0_alarm:0
/sys/class/hwmon/hwmon2/device/in0_beep:0
/sys/class/hwmon/hwmon2/device/in0_input:928
/sys/class/hwmon/hwmon2/device/in0_max:1744
/sys/class/hwmon/hwmon2/device/in0_min:0
/sys/class/hwmon/hwmon2/device/in10_alarm:1
/sys/class/hwmon/hwmon2/device/in10_beep:0
/sys/class/hwmon/hwmon2/device/in10_input:192
/sys/class/hwmon/hwmon2/device/in10_max:0
/sys/class/hwmon/hwmon2/device/in10_min:0
/sys/class/hwmon/hwmon2/device/in11_alarm:1
/sys/class/hwmon/hwmon2/device/in11_beep:0
/sys/class/hwmon/hwmon2/device/in11_input:168
/sys/class/hwmon/hwmon2/device/in11_max:0
/sys/class/hwmon/hwmon2/device/in11_min:0
/sys/class/hwmon/hwmon2/device/in12_alarm:1
/sys/class/hwmon/hwmon2/device/in12_beep:0
/sys/class/hwmon/hwmon2/device/in12_input:160
/sys/class/hwmon/hwmon2/device/in12_max:0
/sys/class/hwmon/hwmon2/device/in12_min:0
/sys/class/hwmon/hwmon2/device/in13_alarm:1
/sys/class/hwmon/hwmon2/device/in13_beep:0
/sys/class/hwmon/hwmon2/device/in13_input:160
/sys/class/hwmon/hwmon2/device/in13_max:0
/sys/class/hwmon/hwmon2/device/in13_min:0
/sys/class/hwmon/hwmon2/device/in14_alarm:1
/sys/class/hwmon/hwmon2/device/in14_beep:0
/sys/class/hwmon/hwmon2/device/in14_input:168
/sys/class/hwmon/hwmon2/device/in14_max:0
/sys/class/hwmon/hwmon2/device/in14_min:0
/sys/class/hwmon/hwmon2/device/in1_alarm:1
/sys/class/hwmon/hwmon2/device/in1_beep:0
/sys/class/hwmon/hwmon2/device/in1_input:984
/sys/class/hwmon/hwmon2/device/in1_max:0
/sys/class/hwmon/hwmon2/device/in1_min:0
/sys/class/hwmon/hwmon2/device/in2_alarm:1
/sys/class/hwmon/hwmon2/device/in2_beep:0
/sys/class/hwmon/hwmon2/device/in2_input:3328
/sys/class/hwmon/hwmon2/device/in2_max:0
/sys/class/hwmon/hwmon2/device/in2_min:0
/sys/class/hwmon/hwmon2/device/in3_alarm:1
/sys/class/hwmon/hwmon2/device/in3_beep:0
/sys/class/hwmon/hwmon2/device/in3_input:3312
/sys/class/hwmon/hwmon2/device/in3_max:0
/sys/class/hwmon/hwmon2/device/in3_min:0
/sys/class/hwmon/hwmon2/device/in4_alarm:1
/sys/class/hwmon/hwmon2/device/in4_beep:0
/sys/class/hwmon/hwmon2/device/in4_input:1008
/sys/class/hwmon/hwmon2/device/in4_max:0
/sys/class/hwmon/hwmon2/device/in4_min:0
/sys/class/hwmon/hwmon2/device/in5_alarm:1
/sys/class/hwmon/hwmon2/device/in5_beep:0
/sys/class/hwmon/hwmon2/device/in5_input:192
/sys/class/hwmon/hwmon2/device/in5_max:0
/sys/class/hwmon/hwmon2/device/in5_min:0
/sys/class/hwmon/hwmon2/device/in6_alarm:1
/sys/class/hwmon/hwmon2/device/in6_beep:0
/sys/class/hwmon/hwmon2/device/in6_input:952
/sys/class/hwmon/hwmon2/device/in6_max:0
/sys/class/hwmon/hwmon2/device/in6_min:0
/sys/class/hwmon/hwmon2/device/in7_alarm:1
/sys/class/hwmon/hwmon2/device/in7_beep:0
/sys/class/hwmon/hwmon2/device/in7_input:3232
/sys/class/hwmon/hwmon2/device/in7_max:0
/sys/class/hwmon/hwmon2/device/in7_min:0
/sys/class/hwmon/hwmon2/device/in8_alarm:1
/sys/class/hwmon/hwmon2/device/in8_beep:0
/sys/class/hwmon/hwmon2/device/in8_input:3264
/sys/class/hwmon/hwmon2/device/in8_max:0
/sys/class/hwmon/hwmon2/device/in8_min:0
/sys/class/hwmon/hwmon2/device/in9_alarm:1
/sys/class/hwmon/hwmon2/device/in9_beep:0
/sys/class/hwmon/hwmon2/device/in9_input:1104
/sys/class/hwmon/hwmon2/device/in9_max:0
/sys/class/hwmon/hwmon2/device/in9_min:0
/sys/class/hwmon/hwmon2/device/intrusion0_alarm:1
/sys/class/hwmon/hwmon2/device/intrusion0_beep:0
/sys/class/hwmon/hwmon2/device/intrusion1_alarm:1
/sys/class/hwmon/hwmon2/device/intrusion1_beep:0
/sys/class/hwmon/hwmon2/device/modalias:platform:nct6775
/sys/class/hwmon/hwmon2/device/name:nct6791
/sys/class/hwmon/hwmon2/device/pwm1:157
/sys/class/hwmon/hwmon2/device/pwm1_auto_point1_pwm:153
/sys/class/hwmon/hwmon2/device/pwm1_auto_point1_temp:30000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point2_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point2_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm1_enable:5
/sys/class/hwmon/hwmon2/device/pwm1_floor:1
/sys/class/hwmon/hwmon2/device/pwm1_mode:1
/sys/class/hwmon/hwmon2/device/pwm1_start:1
/sys/class/hwmon/hwmon2/device/pwm1_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm1_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm1_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm1_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm1_temp_sel:7
/sys/class/hwmon/hwmon2/device/pwm1_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm2:0
/sys/class/hwmon/hwmon2/device/pwm2_auto_point1_pwm:51
/sys/class/hwmon/hwmon2/device/pwm2_auto_point1_temp:20000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point2_pwm:178
/sys/class/hwmon/hwmon2/device/pwm2_auto_point2_temp:70000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm2_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm2_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm2_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm2_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm2_enable:1
/sys/class/hwmon/hwmon2/device/pwm2_floor:1
/sys/class/hwmon/hwmon2/device/pwm2_mode:1
/sys/class/hwmon/hwmon2/device/pwm2_start:1
/sys/class/hwmon/hwmon2/device/pwm2_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm2_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm2_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm2_target_temp:50000
/sys/class/hwmon/hwmon2/device/pwm2_temp_sel:7
/sys/class/hwmon/hwmon2/device/pwm2_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_duty_base:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_duty_step:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_sel:1
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_step:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_step_base:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_step_tol:0
/sys/class/hwmon/hwmon2/device/pwm3:157
/sys/class/hwmon/hwmon2/device/pwm3_auto_point1_pwm:153
/sys/class/hwmon/hwmon2/device/pwm3_auto_point1_temp:30000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point2_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point2_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm3_enable:5
/sys/class/hwmon/hwmon2/device/pwm3_floor:1
/sys/class/hwmon/hwmon2/device/pwm3_mode:1
/sys/class/hwmon/hwmon2/device/pwm3_start:1
/sys/class/hwmon/hwmon2/device/pwm3_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm3_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm3_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm3_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm3_temp_sel:7
/sys/class/hwmon/hwmon2/device/pwm3_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm4:157
/sys/class/hwmon/hwmon2/device/pwm4_auto_point1_pwm:153
/sys/class/hwmon/hwmon2/device/pwm4_auto_point1_temp:30000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point2_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point2_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm4_enable:5
/sys/class/hwmon/hwmon2/device/pwm4_floor:1
/sys/class/hwmon/hwmon2/device/pwm4_mode:1
/sys/class/hwmon/hwmon2/device/pwm4_start:1
/sys/class/hwmon/hwmon2/device/pwm4_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm4_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm4_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm4_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm4_temp_sel:7
/sys/class/hwmon/hwmon2/device/pwm4_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm5:255
/sys/class/hwmon/hwmon2/device/pwm5_auto_point1_pwm:140
/sys/class/hwmon/hwmon2/device/pwm5_auto_point1_temp:25000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point2_pwm:170
/sys/class/hwmon/hwmon2/device/pwm5_auto_point2_temp:35000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point3_pwm:200
/sys/class/hwmon/hwmon2/device/pwm5_auto_point3_temp:45000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point4_pwm:230
/sys/class/hwmon/hwmon2/device/pwm5_auto_point4_temp:55000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm5_auto_point5_temp:60000
/sys/class/hwmon/hwmon2/device/pwm5_crit_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm5_enable:0
/sys/class/hwmon/hwmon2/device/pwm5_floor:1
/sys/class/hwmon/hwmon2/device/pwm5_mode:1
/sys/class/hwmon/hwmon2/device/pwm5_start:1
/sys/class/hwmon/hwmon2/device/pwm5_step_down_time:1000
/sys/class/hwmon/hwmon2/device/pwm5_step_up_time:1000
/sys/class/hwmon/hwmon2/device/pwm5_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm5_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm5_temp_sel:3
/sys/class/hwmon/hwmon2/device/pwm5_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/temp10_input:0
/sys/class/hwmon/hwmon2/device/temp10_label:PCH_CPU_TEMP
/sys/class/hwmon/hwmon2/device/temp1_input:107000
/sys/class/hwmon/hwmon2/device/temp1_label:SYSTIN
/sys/class/hwmon/hwmon2/device/temp1_max:0
/sys/class/hwmon/hwmon2/device/temp1_max_hyst:0
/sys/class/hwmon/hwmon2/device/temp1_offset:0
/sys/class/hwmon/hwmon2/device/temp1_type:4
/sys/class/hwmon/hwmon2/device/temp2_alarm:0
/sys/class/hwmon/hwmon2/device/temp2_beep:0
/sys/class/hwmon/hwmon2/device/temp2_input:32000
/sys/class/hwmon/hwmon2/device/temp2_label:CPUTIN
/sys/class/hwmon/hwmon2/device/temp2_max:80000
/sys/class/hwmon/hwmon2/device/temp2_max_hyst:75000
/sys/class/hwmon/hwmon2/device/temp2_offset:0
/sys/class/hwmon/hwmon2/device/temp2_type:4
/sys/class/hwmon/hwmon2/device/temp3_alarm:1
/sys/class/hwmon/hwmon2/device/temp3_beep:0
/sys/class/hwmon/hwmon2/device/temp3_input:29000
/sys/class/hwmon/hwmon2/device/temp3_label:AUXTIN0
/sys/class/hwmon/hwmon2/device/temp3_max:0
/sys/class/hwmon/hwmon2/device/temp3_max_hyst:0
/sys/class/hwmon/hwmon2/device/temp3_offset:0
/sys/class/hwmon/hwmon2/device/temp3_type:4
/sys/class/hwmon/hwmon2/device/temp4_input:100000
/sys/class/hwmon/hwmon2/device/temp4_label:AUXTIN1
/sys/class/hwmon/hwmon2/device/temp4_offset:0
/sys/class/hwmon/hwmon2/device/temp4_type:4
/sys/class/hwmon/hwmon2/device/temp5_input:99000
/sys/class/hwmon/hwmon2/device/temp5_label:AUXTIN2
/sys/class/hwmon/hwmon2/device/temp5_offset:0
/sys/class/hwmon/hwmon2/device/temp5_type:4
/sys/class/hwmon/hwmon2/device/temp6_input:99000
/sys/class/hwmon/hwmon2/device/temp6_label:AUXTIN3
/sys/class/hwmon/hwmon2/device/temp6_offset:0
/sys/class/hwmon/hwmon2/device/temp6_type:4
/sys/class/hwmon/hwmon2/device/temp7_input:32000
/sys/class/hwmon/hwmon2/device/temp7_label:PECI Agent 0
/sys/class/hwmon/hwmon2/device/temp8_input:0
/sys/class/hwmon/hwmon2/device/temp8_label:PCH_CHIP_CPU_MAX_TEMP
/sys/class/hwmon/hwmon2/device/temp9_input:0
/sys/class/hwmon/hwmon2/device/temp9_label:PCH_CHIP_TEMP
/sys/class/hwmon/hwmon2/device/uevent:DRIVER=nct6775
/sys/class/hwmon/hwmon2/device/uevent:MODALIAS=platform:nct6775
==============
POST BOOT
acpitz-virtual-0
Adapter: Virtual device
temp1: +27.8°C (crit = +105.0°C)
temp2: +29.8°C (crit = +105.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +33.0°C (high = +80.0°C, crit = +100.0°C)
Core 0: +30.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +30.0°C (high = +80.0°C, crit = +100.0°C)
Core 2: +32.0°C (high = +80.0°C, crit = +100.0°C)
Core 3: +28.0°C (high = +80.0°C, crit = +100.0°C)
nct6791-isa-0290
Adapter: ISA adapter
in0: +0.93 V (min = +0.00 V, max = +1.74 V)
in1: +0.98 V (min = +0.00 V, max = +0.00 V) ALARM
in2: +3.33 V (min = +0.00 V, max = +0.00 V) ALARM
in3: +3.31 V (min = +0.00 V, max = +0.00 V) ALARM
in4: +1.01 V (min = +0.00 V, max = +0.00 V) ALARM
in5: +0.20 V (min = +0.00 V, max = +0.00 V) ALARM
in6: +0.94 V (min = +0.00 V, max = +0.00 V) ALARM
in7: +3.23 V (min = +0.00 V, max = +0.00 V) ALARM
in8: +3.26 V (min = +0.00 V, max = +0.00 V) ALARM
in9: +1.10 V (min = +0.00 V, max = +0.00 V) ALARM
in10: +0.20 V (min = +0.00 V, max = +0.00 V) ALARM
in11: +0.18 V (min = +0.00 V, max = +0.00 V) ALARM
in12: +0.17 V (min = +0.00 V, max = +0.00 V) ALARM
in13: +0.17 V (min = +0.00 V, max = +0.00 V) ALARM
in14: +0.18 V (min = +0.00 V, max = +0.00 V) ALARM
fan1: 905 RPM (min = 0 RPM)
fan2: 1238 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
SYSTIN: +106.0°C (high = +0.0°C, hyst = +0.0°C) sensor = thermistor
CPUTIN: +33.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
AUXTIN0: +29.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = thermistor
AUXTIN1: +98.0°C sensor = thermistor
AUXTIN2: +98.0°C sensor = thermistor
AUXTIN3: +97.0°C sensor = thermistor
PECI Agent 0: +33.0°C
PCH_CHIP_CPU_MAX_TEMP: +0.0°C
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
intrusion0: ALARM
intrusion1: ALARM
beep_enable: disabled
/sys/class/hwmon/hwmon2/device/beep_enable:0
/sys/class/hwmon/hwmon2/device/fan1_alarm:0
/sys/class/hwmon/hwmon2/device/fan1_beep:0
/sys/class/hwmon/hwmon2/device/fan1_input:908
/sys/class/hwmon/hwmon2/device/fan1_min:0
/sys/class/hwmon/hwmon2/device/fan1_pulses:2
/sys/class/hwmon/hwmon2/device/fan1_target:0
/sys/class/hwmon/hwmon2/device/fan1_tolerance:0
/sys/class/hwmon/hwmon2/device/fan2_alarm:0
/sys/class/hwmon/hwmon2/device/fan2_beep:0
/sys/class/hwmon/hwmon2/device/fan2_input:1230
/sys/class/hwmon/hwmon2/device/fan2_min:0
/sys/class/hwmon/hwmon2/device/fan2_pulses:2
/sys/class/hwmon/hwmon2/device/fan2_target:27000
/sys/class/hwmon/hwmon2/device/fan2_tolerance:0
/sys/class/hwmon/hwmon2/device/fan3_alarm:0
/sys/class/hwmon/hwmon2/device/fan3_beep:0
/sys/class/hwmon/hwmon2/device/fan3_input:0
/sys/class/hwmon/hwmon2/device/fan3_min:0
/sys/class/hwmon/hwmon2/device/fan3_pulses:2
/sys/class/hwmon/hwmon2/device/fan3_target:0
/sys/class/hwmon/hwmon2/device/fan3_tolerance:0
/sys/class/hwmon/hwmon2/device/fan4_alarm:0
/sys/class/hwmon/hwmon2/device/fan4_beep:0
/sys/class/hwmon/hwmon2/device/fan4_input:0
/sys/class/hwmon/hwmon2/device/fan4_min:0
/sys/class/hwmon/hwmon2/device/fan4_pulses:2
/sys/class/hwmon/hwmon2/device/fan4_target:0
/sys/class/hwmon/hwmon2/device/fan4_tolerance:0
/sys/class/hwmon/hwmon2/device/fan5_alarm:0
/sys/class/hwmon/hwmon2/device/fan5_beep:0
/sys/class/hwmon/hwmon2/device/fan5_input:0
/sys/class/hwmon/hwmon2/device/fan5_min:0
/sys/class/hwmon/hwmon2/device/fan5_pulses:2
/sys/class/hwmon/hwmon2/device/fan5_target:0
/sys/class/hwmon/hwmon2/device/fan5_tolerance:0
/sys/class/hwmon/hwmon2/device/in0_alarm:0
/sys/class/hwmon/hwmon2/device/in0_beep:0
/sys/class/hwmon/hwmon2/device/in0_input:928
/sys/class/hwmon/hwmon2/device/in0_max:1744
/sys/class/hwmon/hwmon2/device/in0_min:0
/sys/class/hwmon/hwmon2/device/in10_alarm:1
/sys/class/hwmon/hwmon2/device/in10_beep:0
/sys/class/hwmon/hwmon2/device/in10_input:200
/sys/class/hwmon/hwmon2/device/in10_max:0
/sys/class/hwmon/hwmon2/device/in10_min:0
/sys/class/hwmon/hwmon2/device/in11_alarm:1
/sys/class/hwmon/hwmon2/device/in11_beep:0
/sys/class/hwmon/hwmon2/device/in11_input:176
/sys/class/hwmon/hwmon2/device/in11_max:0
/sys/class/hwmon/hwmon2/device/in11_min:0
/sys/class/hwmon/hwmon2/device/in12_alarm:1
/sys/class/hwmon/hwmon2/device/in12_beep:0
/sys/class/hwmon/hwmon2/device/in12_input:168
/sys/class/hwmon/hwmon2/device/in12_max:0
/sys/class/hwmon/hwmon2/device/in12_min:0
/sys/class/hwmon/hwmon2/device/in13_alarm:1
/sys/class/hwmon/hwmon2/device/in13_beep:0
/sys/class/hwmon/hwmon2/device/in13_input:168
/sys/class/hwmon/hwmon2/device/in13_max:0
/sys/class/hwmon/hwmon2/device/in13_min:0
/sys/class/hwmon/hwmon2/device/in14_alarm:1
/sys/class/hwmon/hwmon2/device/in14_beep:0
/sys/class/hwmon/hwmon2/device/in14_input:176
/sys/class/hwmon/hwmon2/device/in14_max:0
/sys/class/hwmon/hwmon2/device/in14_min:0
/sys/class/hwmon/hwmon2/device/in1_alarm:1
/sys/class/hwmon/hwmon2/device/in1_beep:0
/sys/class/hwmon/hwmon2/device/in1_input:984
/sys/class/hwmon/hwmon2/device/in1_max:0
/sys/class/hwmon/hwmon2/device/in1_min:0
/sys/class/hwmon/hwmon2/device/in2_alarm:1
/sys/class/hwmon/hwmon2/device/in2_beep:0
/sys/class/hwmon/hwmon2/device/in2_input:3328
/sys/class/hwmon/hwmon2/device/in2_max:0
/sys/class/hwmon/hwmon2/device/in2_min:0
/sys/class/hwmon/hwmon2/device/in3_alarm:1
/sys/class/hwmon/hwmon2/device/in3_beep:0
/sys/class/hwmon/hwmon2/device/in3_input:3312
/sys/class/hwmon/hwmon2/device/in3_max:0
/sys/class/hwmon/hwmon2/device/in3_min:0
/sys/class/hwmon/hwmon2/device/in4_alarm:1
/sys/class/hwmon/hwmon2/device/in4_beep:0
/sys/class/hwmon/hwmon2/device/in4_input:1008
/sys/class/hwmon/hwmon2/device/in4_max:0
/sys/class/hwmon/hwmon2/device/in4_min:0
/sys/class/hwmon/hwmon2/device/in5_alarm:1
/sys/class/hwmon/hwmon2/device/in5_beep:0
/sys/class/hwmon/hwmon2/device/in5_input:200
/sys/class/hwmon/hwmon2/device/in5_max:0
/sys/class/hwmon/hwmon2/device/in5_min:0
/sys/class/hwmon/hwmon2/device/in6_alarm:1
/sys/class/hwmon/hwmon2/device/in6_beep:0
/sys/class/hwmon/hwmon2/device/in6_input:936
/sys/class/hwmon/hwmon2/device/in6_max:0
/sys/class/hwmon/hwmon2/device/in6_min:0
/sys/class/hwmon/hwmon2/device/in7_alarm:1
/sys/class/hwmon/hwmon2/device/in7_beep:0
/sys/class/hwmon/hwmon2/device/in7_input:3232
/sys/class/hwmon/hwmon2/device/in7_max:0
/sys/class/hwmon/hwmon2/device/in7_min:0
/sys/class/hwmon/hwmon2/device/in8_alarm:1
/sys/class/hwmon/hwmon2/device/in8_beep:0
/sys/class/hwmon/hwmon2/device/in8_input:3264
/sys/class/hwmon/hwmon2/device/in8_max:0
/sys/class/hwmon/hwmon2/device/in8_min:0
/sys/class/hwmon/hwmon2/device/in9_alarm:1
/sys/class/hwmon/hwmon2/device/in9_beep:0
/sys/class/hwmon/hwmon2/device/in9_input:1104
/sys/class/hwmon/hwmon2/device/in9_max:0
/sys/class/hwmon/hwmon2/device/in9_min:0
/sys/class/hwmon/hwmon2/device/intrusion0_alarm:1
/sys/class/hwmon/hwmon2/device/intrusion0_beep:0
/sys/class/hwmon/hwmon2/device/intrusion1_alarm:1
/sys/class/hwmon/hwmon2/device/intrusion1_beep:0
/sys/class/hwmon/hwmon2/device/modalias:platform:nct6775
/sys/class/hwmon/hwmon2/device/name:nct6791
/sys/class/hwmon/hwmon2/device/pwm1:157
/sys/class/hwmon/hwmon2/device/pwm1_auto_point1_pwm:153
/sys/class/hwmon/hwmon2/device/pwm1_auto_point1_temp:30000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point2_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point2_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm1_enable:5
/sys/class/hwmon/hwmon2/device/pwm1_floor:1
/sys/class/hwmon/hwmon2/device/pwm1_mode:1
/sys/class/hwmon/hwmon2/device/pwm1_start:1
/sys/class/hwmon/hwmon2/device/pwm1_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm1_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm1_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm1_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm1_temp_sel:7
/sys/class/hwmon/hwmon2/device/pwm1_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm2:0
/sys/class/hwmon/hwmon2/device/pwm2_auto_point1_pwm:51
/sys/class/hwmon/hwmon2/device/pwm2_auto_point1_temp:20000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point2_pwm:178
/sys/class/hwmon/hwmon2/device/pwm2_auto_point2_temp:70000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm2_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm2_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm2_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm2_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm2_enable:1
/sys/class/hwmon/hwmon2/device/pwm2_floor:1
/sys/class/hwmon/hwmon2/device/pwm2_mode:1
/sys/class/hwmon/hwmon2/device/pwm2_start:1
/sys/class/hwmon/hwmon2/device/pwm2_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm2_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm2_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm2_target_temp:50000
/sys/class/hwmon/hwmon2/device/pwm2_temp_sel:7
/sys/class/hwmon/hwmon2/device/pwm2_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_duty_base:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_duty_step:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_sel:1
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_step:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_step_base:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_step_tol:0
/sys/class/hwmon/hwmon2/device/pwm3:157
/sys/class/hwmon/hwmon2/device/pwm3_auto_point1_pwm:153
/sys/class/hwmon/hwmon2/device/pwm3_auto_point1_temp:30000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point2_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point2_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm3_enable:5
/sys/class/hwmon/hwmon2/device/pwm3_floor:1
/sys/class/hwmon/hwmon2/device/pwm3_mode:1
/sys/class/hwmon/hwmon2/device/pwm3_start:1
/sys/class/hwmon/hwmon2/device/pwm3_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm3_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm3_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm3_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm3_temp_sel:7
/sys/class/hwmon/hwmon2/device/pwm3_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm4:157
/sys/class/hwmon/hwmon2/device/pwm4_auto_point1_pwm:153
/sys/class/hwmon/hwmon2/device/pwm4_auto_point1_temp:30000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point2_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point2_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm4_enable:5
/sys/class/hwmon/hwmon2/device/pwm4_floor:1
/sys/class/hwmon/hwmon2/device/pwm4_mode:1
/sys/class/hwmon/hwmon2/device/pwm4_start:1
/sys/class/hwmon/hwmon2/device/pwm4_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm4_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm4_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm4_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm4_temp_sel:7
/sys/class/hwmon/hwmon2/device/pwm4_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm5:255
/sys/class/hwmon/hwmon2/device/pwm5_auto_point1_pwm:140
/sys/class/hwmon/hwmon2/device/pwm5_auto_point1_temp:25000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point2_pwm:170
/sys/class/hwmon/hwmon2/device/pwm5_auto_point2_temp:35000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point3_pwm:200
/sys/class/hwmon/hwmon2/device/pwm5_auto_point3_temp:45000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point4_pwm:230
/sys/class/hwmon/hwmon2/device/pwm5_auto_point4_temp:55000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm5_auto_point5_temp:60000
/sys/class/hwmon/hwmon2/device/pwm5_crit_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm5_enable:0
/sys/class/hwmon/hwmon2/device/pwm5_floor:1
/sys/class/hwmon/hwmon2/device/pwm5_mode:1
/sys/class/hwmon/hwmon2/device/pwm5_start:1
/sys/class/hwmon/hwmon2/device/pwm5_step_down_time:1000
/sys/class/hwmon/hwmon2/device/pwm5_step_up_time:1000
/sys/class/hwmon/hwmon2/device/pwm5_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm5_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm5_temp_sel:3
/sys/class/hwmon/hwmon2/device/pwm5_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/temp10_input:0
/sys/class/hwmon/hwmon2/device/temp10_label:PCH_CPU_TEMP
/sys/class/hwmon/hwmon2/device/temp1_input:106000
/sys/class/hwmon/hwmon2/device/temp1_label:SYSTIN
/sys/class/hwmon/hwmon2/device/temp1_max:0
/sys/class/hwmon/hwmon2/device/temp1_max_hyst:0
/sys/class/hwmon/hwmon2/device/temp1_offset:0
/sys/class/hwmon/hwmon2/device/temp1_type:4
/sys/class/hwmon/hwmon2/device/temp2_alarm:0
/sys/class/hwmon/hwmon2/device/temp2_beep:0
/sys/class/hwmon/hwmon2/device/temp2_input:33000
/sys/class/hwmon/hwmon2/device/temp2_label:CPUTIN
/sys/class/hwmon/hwmon2/device/temp2_max:80000
/sys/class/hwmon/hwmon2/device/temp2_max_hyst:75000
/sys/class/hwmon/hwmon2/device/temp2_offset:0
/sys/class/hwmon/hwmon2/device/temp2_type:4
/sys/class/hwmon/hwmon2/device/temp3_alarm:1
/sys/class/hwmon/hwmon2/device/temp3_beep:0
/sys/class/hwmon/hwmon2/device/temp3_input:29000
/sys/class/hwmon/hwmon2/device/temp3_label:AUXTIN0
/sys/class/hwmon/hwmon2/device/temp3_max:0
/sys/class/hwmon/hwmon2/device/temp3_max_hyst:0
/sys/class/hwmon/hwmon2/device/temp3_offset:0
/sys/class/hwmon/hwmon2/device/temp3_type:4
/sys/class/hwmon/hwmon2/device/temp4_input:99000
/sys/class/hwmon/hwmon2/device/temp4_label:AUXTIN1
/sys/class/hwmon/hwmon2/device/temp4_offset:0
/sys/class/hwmon/hwmon2/device/temp4_type:4
/sys/class/hwmon/hwmon2/device/temp5_input:98000
/sys/class/hwmon/hwmon2/device/temp5_label:AUXTIN2
/sys/class/hwmon/hwmon2/device/temp5_offset:0
/sys/class/hwmon/hwmon2/device/temp5_type:4
/sys/class/hwmon/hwmon2/device/temp6_input:97000
/sys/class/hwmon/hwmon2/device/temp6_label:AUXTIN3
/sys/class/hwmon/hwmon2/device/temp6_offset:0
/sys/class/hwmon/hwmon2/device/temp6_type:4
/sys/class/hwmon/hwmon2/device/temp7_input:32500
/sys/class/hwmon/hwmon2/device/temp7_label:PECI Agent 0
/sys/class/hwmon/hwmon2/device/temp8_input:0
/sys/class/hwmon/hwmon2/device/temp8_label:PCH_CHIP_CPU_MAX_TEMP
/sys/class/hwmon/hwmon2/device/temp9_input:0
/sys/class/hwmon/hwmon2/device/temp9_label:PCH_CHIP_TEMP
/sys/class/hwmon/hwmon2/device/uevent:DRIVER=nct6775
/sys/class/hwmon/hwmon2/device/uevent:MODALIAS=platform:nct6775
[-- Attachment #3: Type: text/plain, Size: 153 bytes --]
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (40 preceding siblings ...)
2013-11-13 17:37 ` p. stephen w
@ 2013-11-13 17:40 ` p. stephen w
2013-11-13 18:00 ` p. stephen w
` (2 subsequent siblings)
44 siblings, 0 replies; 46+ messages in thread
From: p. stephen w @ 2013-11-13 17:40 UTC (permalink / raw)
To: lm-sensors
mm...this may be a factor. I had two NCT6775 folders. One in Downloads,
and one in the 'stephen' dir. I'm guessing running modprobe install from
the wrong dir could install the wrong driver. I've removed the older
NCT6775 dir. Let me know if you need this ran again.
On Wed, Nov 13, 2013 at 9:37 AM, p. stephen w <p.stephenwille@gmail.com>wrote:
> I'm pretty sure I did, but just in case I re-ran the install. The
> attached includes the commands as I ran them, plus pre and post boot
> sensor/hwmon info.
>
> Let me know.
>
>
> On Wed, Nov 13, 2013 at 9:33 AM, Guenter Roeck <linux@roeck-us.net> wrote:
>
>> On Tue, Nov 12, 2013 at 11:01:44PM -0800, p. stephen w wrote:
>> > No prob. See attached.
>> >
>> Hi,
>>
>> [ not sure if I actually sent my prevous response. Too early in the
>> morning ;-). ]
>>
>> First of all, thanks a lot for testing. For some reason, the output is
>> the same
>> as before. Yet, the latest driver version should only create the
>> "pwm*weight"
>> attributes for pwm2. So I wonder - is it possible that you did not unload
>> the
>> old driver version with "modprobe -r" before loading the new version ?
>>
>> Thanks,
>> Guenter
>>
>
>
>
> --
>
>
> _____________________________
> Stephen Wille | pstephenwille.com
> *new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
>
--
_____________________________
Stephen Wille | pstephenwille.com
*new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (41 preceding siblings ...)
2013-11-13 17:40 ` p. stephen w
@ 2013-11-13 18:00 ` p. stephen w
2013-11-13 20:42 ` Guenter Roeck
2013-11-13 20:54 ` p. stephen w
44 siblings, 0 replies; 46+ messages in thread
From: p. stephen w @ 2013-11-13 18:00 UTC (permalink / raw)
To: lm-sensors
[-- Attachment #1: Type: text/plain, Size: 1851 bytes --]
Just in case, I re-ran the commands making sure only the latest driver was
being used. See attached.
On Wed, Nov 13, 2013 at 9:40 AM, p. stephen w <p.stephenwille@gmail.com>wrote:
> mm...this may be a factor. I had two NCT6775 folders. One in Downloads,
> and one in the 'stephen' dir. I'm guessing running modprobe install from
> the wrong dir could install the wrong driver. I've removed the older
> NCT6775 dir. Let me know if you need this ran again.
>
>
> On Wed, Nov 13, 2013 at 9:37 AM, p. stephen w <p.stephenwille@gmail.com>wrote:
>
>> I'm pretty sure I did, but just in case I re-ran the install. The
>> attached includes the commands as I ran them, plus pre and post boot
>> sensor/hwmon info.
>>
>> Let me know.
>>
>>
>> On Wed, Nov 13, 2013 at 9:33 AM, Guenter Roeck <linux@roeck-us.net>wrote:
>>
>>> On Tue, Nov 12, 2013 at 11:01:44PM -0800, p. stephen w wrote:
>>> > No prob. See attached.
>>> >
>>> Hi,
>>>
>>> [ not sure if I actually sent my prevous response. Too early in the
>>> morning ;-). ]
>>>
>>> First of all, thanks a lot for testing. For some reason, the output is
>>> the same
>>> as before. Yet, the latest driver version should only create the
>>> "pwm*weight"
>>> attributes for pwm2. So I wonder - is it possible that you did not
>>> unload the
>>> old driver version with "modprobe -r" before loading the new version ?
>>>
>>> Thanks,
>>> Guenter
>>>
>>
>>
>>
>> --
>>
>>
>> _____________________________
>> Stephen Wille | pstephenwille.com
>> *new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
>>
>
>
>
> --
>
>
> _____________________________
> Stephen Wille | pstephenwille.com
> *new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
>
--
_____________________________
Stephen Wille | pstephenwille.com
*new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: newNCT6775readings.d.txt --]
[-- Type: text/plain; charset=US-ASCII; name="newNCT6775readings.d.txt", Size: 34066 bytes --]
Mint Downloads # modprobe -r nct6775
Mint Downloads # sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +27.8°C (crit = +105.0°C)
temp2: +29.8°C (crit = +105.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +36.0°C (high = +80.0°C, crit = +100.0°C)
Core 0: +34.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +31.0°C (high = +80.0°C, crit = +100.0°C)
Core 2: +35.0°C (high = +80.0°C, crit = +100.0°C)
Core 3: +31.0°C (high = +80.0°C, crit = +100.0°C)
Mint Downloads # ls
lm_sensors-3.3.4 lm_sensors-3.3.4.tar.bz2 nct6775
Mint Downloads # rm -rf nct6775/
Mint Downloads # ls
lm_sensors-3.3.4 lm_sensors-3.3.4.tar.bz2
Mint Downloads # git clone https://github.com/groeck/nct6775.git
Cloning into 'nct6775'...
remote: Counting objects: 299, done.
remote: Compressing objects: 100% (147/147), done.
remote: Total 299 (delta 174), reused 268 (delta 152)
Receiving objects: 100% (299/299), 152.25 KiB, done.
Resolving deltas: 100% (174/174), done.
Mint Downloads # cd nct6775/
Mint nct6775 # make all
CC [M] /home/stephen/Downloads/nct6775/nct6775.o
Building modules, stage 2.
MODPOST 1 modules
CC /home/stephen/Downloads/nct6775/nct6775.mod.o
LD [M] /home/stephen/Downloads/nct6775/nct6775.ko
Mint nct6775 # make install
cp nct6775.ko /lib/modules/3.8.0-19-generic/kernel/drivers/hwmon
depmod -a -F /boot/System.map-3.8.0-19-generic 3.8.0-19-generic
Mint nct6775 # modprobe nct6775
==================
PRE BOOT
acpitz-virtual-0
Adapter: Virtual device
temp1: +27.8°C (crit = +105.0°C)
temp2: +29.8°C (crit = +105.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +36.0°C (high = +80.0°C, crit = +100.0°C)
Core 0: +33.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +31.0°C (high = +80.0°C, crit = +100.0°C)
Core 2: +37.0°C (high = +80.0°C, crit = +100.0°C)
Core 3: +31.0°C (high = +80.0°C, crit = +100.0°C)
nct6791-isa-0290
Adapter: ISA adapter
in0: +0.93 V (min = +0.00 V, max = +1.74 V)
in1: +0.98 V (min = +0.00 V, max = +0.00 V) ALARM
in2: +3.33 V (min = +0.00 V, max = +0.00 V) ALARM
in3: +3.31 V (min = +0.00 V, max = +0.00 V) ALARM
in4: +1.01 V (min = +0.00 V, max = +0.00 V) ALARM
in5: +0.22 V (min = +0.00 V, max = +0.00 V) ALARM
in6: +0.94 V (min = +0.00 V, max = +0.00 V) ALARM
in7: +3.23 V (min = +0.00 V, max = +0.00 V) ALARM
in8: +3.26 V (min = +0.00 V, max = +0.00 V) ALARM
in9: +1.10 V (min = +0.00 V, max = +0.00 V) ALARM
in10: +0.22 V (min = +0.00 V, max = +0.00 V) ALARM
in11: +0.20 V (min = +0.00 V, max = +0.00 V) ALARM
in12: +0.19 V (min = +0.00 V, max = +0.00 V) ALARM
in13: +0.19 V (min = +0.00 V, max = +0.00 V) ALARM
in14: +0.20 V (min = +0.00 V, max = +0.00 V) ALARM
fan1: 961 RPM (min = 0 RPM)
fan2: 1226 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
SYSTIN: +100.0°C (high = +0.0°C, hyst = +0.0°C) sensor = thermistor
CPUTIN: +36.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
AUXTIN0: +29.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = thermistor
AUXTIN1: +93.0°C sensor = thermistor
AUXTIN2: +92.0°C sensor = thermistor
AUXTIN3: +92.0°C sensor = thermistor
PECI Agent 0: +35.5°C
PCH_CHIP_CPU_MAX_TEMP: +0.0°C
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
intrusion0: ALARM
intrusion1: ALARM
beep_enable: disabled
/sys/class/hwmon/hwmon2/device/beep_enable:0
/sys/class/hwmon/hwmon2/device/fan1_alarm:0
/sys/class/hwmon/hwmon2/device/fan1_beep:0
/sys/class/hwmon/hwmon2/device/fan1_input:963
/sys/class/hwmon/hwmon2/device/fan1_min:0
/sys/class/hwmon/hwmon2/device/fan1_pulses:2
/sys/class/hwmon/hwmon2/device/fan1_target:0
/sys/class/hwmon/hwmon2/device/fan1_tolerance:0
/sys/class/hwmon/hwmon2/device/fan2_alarm:0
/sys/class/hwmon/hwmon2/device/fan2_beep:0
/sys/class/hwmon/hwmon2/device/fan2_input:1226
/sys/class/hwmon/hwmon2/device/fan2_min:0
/sys/class/hwmon/hwmon2/device/fan2_pulses:2
/sys/class/hwmon/hwmon2/device/fan2_target:27000
/sys/class/hwmon/hwmon2/device/fan2_tolerance:0
/sys/class/hwmon/hwmon2/device/fan3_alarm:0
/sys/class/hwmon/hwmon2/device/fan3_beep:0
/sys/class/hwmon/hwmon2/device/fan3_input:0
/sys/class/hwmon/hwmon2/device/fan3_min:0
/sys/class/hwmon/hwmon2/device/fan3_pulses:2
/sys/class/hwmon/hwmon2/device/fan3_target:0
/sys/class/hwmon/hwmon2/device/fan3_tolerance:0
/sys/class/hwmon/hwmon2/device/fan4_alarm:0
/sys/class/hwmon/hwmon2/device/fan4_beep:0
/sys/class/hwmon/hwmon2/device/fan4_input:0
/sys/class/hwmon/hwmon2/device/fan4_min:0
/sys/class/hwmon/hwmon2/device/fan4_pulses:2
/sys/class/hwmon/hwmon2/device/fan4_target:0
/sys/class/hwmon/hwmon2/device/fan4_tolerance:0
/sys/class/hwmon/hwmon2/device/fan5_alarm:0
/sys/class/hwmon/hwmon2/device/fan5_beep:0
/sys/class/hwmon/hwmon2/device/fan5_input:0
/sys/class/hwmon/hwmon2/device/fan5_min:0
/sys/class/hwmon/hwmon2/device/fan5_pulses:2
/sys/class/hwmon/hwmon2/device/fan5_target:0
/sys/class/hwmon/hwmon2/device/fan5_tolerance:0
/sys/class/hwmon/hwmon2/device/in0_alarm:0
/sys/class/hwmon/hwmon2/device/in0_beep:0
/sys/class/hwmon/hwmon2/device/in0_input:928
/sys/class/hwmon/hwmon2/device/in0_max:1744
/sys/class/hwmon/hwmon2/device/in0_min:0
/sys/class/hwmon/hwmon2/device/in10_alarm:1
/sys/class/hwmon/hwmon2/device/in10_beep:0
/sys/class/hwmon/hwmon2/device/in10_input:224
/sys/class/hwmon/hwmon2/device/in10_max:0
/sys/class/hwmon/hwmon2/device/in10_min:0
/sys/class/hwmon/hwmon2/device/in11_alarm:1
/sys/class/hwmon/hwmon2/device/in11_beep:0
/sys/class/hwmon/hwmon2/device/in11_input:200
/sys/class/hwmon/hwmon2/device/in11_max:0
/sys/class/hwmon/hwmon2/device/in11_min:0
/sys/class/hwmon/hwmon2/device/in12_alarm:1
/sys/class/hwmon/hwmon2/device/in12_beep:0
/sys/class/hwmon/hwmon2/device/in12_input:192
/sys/class/hwmon/hwmon2/device/in12_max:0
/sys/class/hwmon/hwmon2/device/in12_min:0
/sys/class/hwmon/hwmon2/device/in13_alarm:1
/sys/class/hwmon/hwmon2/device/in13_beep:0
/sys/class/hwmon/hwmon2/device/in13_input:192
/sys/class/hwmon/hwmon2/device/in13_max:0
/sys/class/hwmon/hwmon2/device/in13_min:0
/sys/class/hwmon/hwmon2/device/in14_alarm:1
/sys/class/hwmon/hwmon2/device/in14_beep:0
/sys/class/hwmon/hwmon2/device/in14_input:200
/sys/class/hwmon/hwmon2/device/in14_max:0
/sys/class/hwmon/hwmon2/device/in14_min:0
/sys/class/hwmon/hwmon2/device/in1_alarm:1
/sys/class/hwmon/hwmon2/device/in1_beep:0
/sys/class/hwmon/hwmon2/device/in1_input:984
/sys/class/hwmon/hwmon2/device/in1_max:0
/sys/class/hwmon/hwmon2/device/in1_min:0
/sys/class/hwmon/hwmon2/device/in2_alarm:1
/sys/class/hwmon/hwmon2/device/in2_beep:0
/sys/class/hwmon/hwmon2/device/in2_input:3328
/sys/class/hwmon/hwmon2/device/in2_max:0
/sys/class/hwmon/hwmon2/device/in2_min:0
/sys/class/hwmon/hwmon2/device/in3_alarm:1
/sys/class/hwmon/hwmon2/device/in3_beep:0
/sys/class/hwmon/hwmon2/device/in3_input:3312
/sys/class/hwmon/hwmon2/device/in3_max:0
/sys/class/hwmon/hwmon2/device/in3_min:0
/sys/class/hwmon/hwmon2/device/in4_alarm:1
/sys/class/hwmon/hwmon2/device/in4_beep:0
/sys/class/hwmon/hwmon2/device/in4_input:1008
/sys/class/hwmon/hwmon2/device/in4_max:0
/sys/class/hwmon/hwmon2/device/in4_min:0
/sys/class/hwmon/hwmon2/device/in5_alarm:1
/sys/class/hwmon/hwmon2/device/in5_beep:0
/sys/class/hwmon/hwmon2/device/in5_input:224
/sys/class/hwmon/hwmon2/device/in5_max:0
/sys/class/hwmon/hwmon2/device/in5_min:0
/sys/class/hwmon/hwmon2/device/in6_alarm:1
/sys/class/hwmon/hwmon2/device/in6_beep:0
/sys/class/hwmon/hwmon2/device/in6_input:944
/sys/class/hwmon/hwmon2/device/in6_max:0
/sys/class/hwmon/hwmon2/device/in6_min:0
/sys/class/hwmon/hwmon2/device/in7_alarm:1
/sys/class/hwmon/hwmon2/device/in7_beep:0
/sys/class/hwmon/hwmon2/device/in7_input:3232
/sys/class/hwmon/hwmon2/device/in7_max:0
/sys/class/hwmon/hwmon2/device/in7_min:0
/sys/class/hwmon/hwmon2/device/in8_alarm:1
/sys/class/hwmon/hwmon2/device/in8_beep:0
/sys/class/hwmon/hwmon2/device/in8_input:3264
/sys/class/hwmon/hwmon2/device/in8_max:0
/sys/class/hwmon/hwmon2/device/in8_min:0
/sys/class/hwmon/hwmon2/device/in9_alarm:1
/sys/class/hwmon/hwmon2/device/in9_beep:0
/sys/class/hwmon/hwmon2/device/in9_input:1104
/sys/class/hwmon/hwmon2/device/in9_max:0
/sys/class/hwmon/hwmon2/device/in9_min:0
/sys/class/hwmon/hwmon2/device/intrusion0_alarm:1
/sys/class/hwmon/hwmon2/device/intrusion0_beep:0
/sys/class/hwmon/hwmon2/device/intrusion1_alarm:1
/sys/class/hwmon/hwmon2/device/intrusion1_beep:0
/sys/class/hwmon/hwmon2/device/modalias:platform:nct6775
/sys/class/hwmon/hwmon2/device/name:nct6791
/sys/class/hwmon/hwmon2/device/pwm1:164
/sys/class/hwmon/hwmon2/device/pwm1_auto_point1_pwm:153
/sys/class/hwmon/hwmon2/device/pwm1_auto_point1_temp:30000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point2_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point2_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm1_enable:5
/sys/class/hwmon/hwmon2/device/pwm1_floor:1
/sys/class/hwmon/hwmon2/device/pwm1_mode:1
/sys/class/hwmon/hwmon2/device/pwm1_start:1
/sys/class/hwmon/hwmon2/device/pwm1_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm1_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm1_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm1_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm1_temp_sel:7
/sys/class/hwmon/hwmon2/device/pwm1_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm2:0
/sys/class/hwmon/hwmon2/device/pwm2_auto_point1_pwm:51
/sys/class/hwmon/hwmon2/device/pwm2_auto_point1_temp:20000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point2_pwm:178
/sys/class/hwmon/hwmon2/device/pwm2_auto_point2_temp:70000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm2_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm2_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm2_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm2_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm2_enable:1
/sys/class/hwmon/hwmon2/device/pwm2_floor:1
/sys/class/hwmon/hwmon2/device/pwm2_mode:1
/sys/class/hwmon/hwmon2/device/pwm2_start:1
/sys/class/hwmon/hwmon2/device/pwm2_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm2_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm2_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm2_target_temp:50000
/sys/class/hwmon/hwmon2/device/pwm2_temp_sel:7
/sys/class/hwmon/hwmon2/device/pwm2_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_duty_base:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_duty_step:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_sel:1
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_step:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_step_base:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_step_tol:0
/sys/class/hwmon/hwmon2/device/pwm3:164
/sys/class/hwmon/hwmon2/device/pwm3_auto_point1_pwm:153
/sys/class/hwmon/hwmon2/device/pwm3_auto_point1_temp:30000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point2_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point2_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm3_enable:5
/sys/class/hwmon/hwmon2/device/pwm3_floor:1
/sys/class/hwmon/hwmon2/device/pwm3_mode:1
/sys/class/hwmon/hwmon2/device/pwm3_start:1
/sys/class/hwmon/hwmon2/device/pwm3_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm3_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm3_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm3_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm3_temp_sel:7
/sys/class/hwmon/hwmon2/device/pwm3_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm4:164
/sys/class/hwmon/hwmon2/device/pwm4_auto_point1_pwm:153
/sys/class/hwmon/hwmon2/device/pwm4_auto_point1_temp:30000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point2_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point2_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm4_enable:5
/sys/class/hwmon/hwmon2/device/pwm4_floor:1
/sys/class/hwmon/hwmon2/device/pwm4_mode:1
/sys/class/hwmon/hwmon2/device/pwm4_start:1
/sys/class/hwmon/hwmon2/device/pwm4_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm4_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm4_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm4_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm4_temp_sel:7
/sys/class/hwmon/hwmon2/device/pwm4_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm5:255
/sys/class/hwmon/hwmon2/device/pwm5_auto_point1_pwm:140
/sys/class/hwmon/hwmon2/device/pwm5_auto_point1_temp:25000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point2_pwm:170
/sys/class/hwmon/hwmon2/device/pwm5_auto_point2_temp:35000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point3_pwm:200
/sys/class/hwmon/hwmon2/device/pwm5_auto_point3_temp:45000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point4_pwm:230
/sys/class/hwmon/hwmon2/device/pwm5_auto_point4_temp:55000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm5_auto_point5_temp:60000
/sys/class/hwmon/hwmon2/device/pwm5_crit_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm5_enable:0
/sys/class/hwmon/hwmon2/device/pwm5_floor:1
/sys/class/hwmon/hwmon2/device/pwm5_mode:1
/sys/class/hwmon/hwmon2/device/pwm5_start:1
/sys/class/hwmon/hwmon2/device/pwm5_step_down_time:1000
/sys/class/hwmon/hwmon2/device/pwm5_step_up_time:1000
/sys/class/hwmon/hwmon2/device/pwm5_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm5_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm5_temp_sel:3
/sys/class/hwmon/hwmon2/device/pwm5_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/temp10_input:0
/sys/class/hwmon/hwmon2/device/temp10_label:PCH_CPU_TEMP
/sys/class/hwmon/hwmon2/device/temp1_input:100000
/sys/class/hwmon/hwmon2/device/temp1_label:SYSTIN
/sys/class/hwmon/hwmon2/device/temp1_max:0
/sys/class/hwmon/hwmon2/device/temp1_max_hyst:0
/sys/class/hwmon/hwmon2/device/temp1_offset:0
/sys/class/hwmon/hwmon2/device/temp1_type:4
/sys/class/hwmon/hwmon2/device/temp2_alarm:0
/sys/class/hwmon/hwmon2/device/temp2_beep:0
/sys/class/hwmon/hwmon2/device/temp2_input:37000
/sys/class/hwmon/hwmon2/device/temp2_label:CPUTIN
/sys/class/hwmon/hwmon2/device/temp2_max:80000
/sys/class/hwmon/hwmon2/device/temp2_max_hyst:75000
/sys/class/hwmon/hwmon2/device/temp2_offset:0
/sys/class/hwmon/hwmon2/device/temp2_type:4
/sys/class/hwmon/hwmon2/device/temp3_alarm:1
/sys/class/hwmon/hwmon2/device/temp3_beep:0
/sys/class/hwmon/hwmon2/device/temp3_input:29000
/sys/class/hwmon/hwmon2/device/temp3_label:AUXTIN0
/sys/class/hwmon/hwmon2/device/temp3_max:0
/sys/class/hwmon/hwmon2/device/temp3_max_hyst:0
/sys/class/hwmon/hwmon2/device/temp3_offset:0
/sys/class/hwmon/hwmon2/device/temp3_type:4
/sys/class/hwmon/hwmon2/device/temp4_input:93000
/sys/class/hwmon/hwmon2/device/temp4_label:AUXTIN1
/sys/class/hwmon/hwmon2/device/temp4_offset:0
/sys/class/hwmon/hwmon2/device/temp4_type:4
/sys/class/hwmon/hwmon2/device/temp5_input:92000
/sys/class/hwmon/hwmon2/device/temp5_label:AUXTIN2
/sys/class/hwmon/hwmon2/device/temp5_offset:0
/sys/class/hwmon/hwmon2/device/temp5_type:4
/sys/class/hwmon/hwmon2/device/temp6_input:92000
/sys/class/hwmon/hwmon2/device/temp6_label:AUXTIN3
/sys/class/hwmon/hwmon2/device/temp6_offset:0
/sys/class/hwmon/hwmon2/device/temp6_type:4
/sys/class/hwmon/hwmon2/device/temp7_input:35000
/sys/class/hwmon/hwmon2/device/temp7_label:PECI Agent 0
/sys/class/hwmon/hwmon2/device/temp8_input:0
/sys/class/hwmon/hwmon2/device/temp8_label:PCH_CHIP_CPU_MAX_TEMP
/sys/class/hwmon/hwmon2/device/temp9_input:0
/sys/class/hwmon/hwmon2/device/temp9_label:PCH_CHIP_TEMP
/sys/class/hwmon/hwmon2/device/uevent:DRIVER=nct6775
/sys/class/hwmon/hwmon2/device/uevent:MODALIAS=platform:nct6775
==============
POST BOOT
acpitz-virtual-0
Adapter: Virtual device
temp1: +27.8°C (crit = +105.0°C)
temp2: +29.8°C (crit = +105.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +36.0°C (high = +80.0°C, crit = +100.0°C)
Core 0: +34.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +33.0°C (high = +80.0°C, crit = +100.0°C)
Core 2: +36.0°C (high = +80.0°C, crit = +100.0°C)
Core 3: +31.0°C (high = +80.0°C, crit = +100.0°C)
nct6791-isa-0290
Adapter: ISA adapter
in0: +0.93 V (min = +0.00 V, max = +1.74 V)
in1: +0.98 V (min = +0.00 V, max = +0.00 V) ALARM
in2: +3.33 V (min = +0.00 V, max = +0.00 V) ALARM
in3: +3.31 V (min = +0.00 V, max = +0.00 V) ALARM
in4: +1.01 V (min = +0.00 V, max = +0.00 V) ALARM
in5: +0.22 V (min = +0.00 V, max = +0.00 V) ALARM
in6: +0.93 V (min = +0.00 V, max = +0.00 V) ALARM
in7: +3.23 V (min = +0.00 V, max = +0.00 V) ALARM
in8: +3.26 V (min = +0.00 V, max = +0.00 V) ALARM
in9: +1.10 V (min = +0.00 V, max = +0.00 V) ALARM
in10: +0.22 V (min = +0.00 V, max = +0.00 V) ALARM
in11: +0.19 V (min = +0.00 V, max = +0.00 V) ALARM
in12: +0.18 V (min = +0.00 V, max = +0.00 V) ALARM
in13: +0.19 V (min = +0.00 V, max = +0.00 V) ALARM
in14: +0.19 V (min = +0.00 V, max = +0.00 V) ALARM
fan1: 963 RPM (min = 0 RPM)
fan2: 1151 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
SYSTIN: +102.0°C (high = +0.0°C, hyst = +0.0°C) sensor = thermistor
CPUTIN: +37.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
AUXTIN0: +30.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = thermistor
AUXTIN1: +95.0°C sensor = thermistor
AUXTIN2: +93.0°C sensor = thermistor
AUXTIN3: +93.0°C sensor = thermistor
PECI Agent 0: +35.5°C
PCH_CHIP_CPU_MAX_TEMP: +0.0°C
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
intrusion0: ALARM
intrusion1: ALARM
beep_enable: disabled
/sys/class/hwmon/hwmon2/device/beep_enable:0
/sys/class/hwmon/hwmon2/device/fan1_alarm:0
/sys/class/hwmon/hwmon2/device/fan1_beep:0
/sys/class/hwmon/hwmon2/device/fan1_input:960
/sys/class/hwmon/hwmon2/device/fan1_min:0
/sys/class/hwmon/hwmon2/device/fan1_pulses:2
/sys/class/hwmon/hwmon2/device/fan1_target:0
/sys/class/hwmon/hwmon2/device/fan1_tolerance:0
/sys/class/hwmon/hwmon2/device/fan2_alarm:0
/sys/class/hwmon/hwmon2/device/fan2_beep:0
/sys/class/hwmon/hwmon2/device/fan2_input:1137
/sys/class/hwmon/hwmon2/device/fan2_min:0
/sys/class/hwmon/hwmon2/device/fan2_pulses:2
/sys/class/hwmon/hwmon2/device/fan2_target:27000
/sys/class/hwmon/hwmon2/device/fan2_tolerance:0
/sys/class/hwmon/hwmon2/device/fan3_alarm:0
/sys/class/hwmon/hwmon2/device/fan3_beep:0
/sys/class/hwmon/hwmon2/device/fan3_input:0
/sys/class/hwmon/hwmon2/device/fan3_min:0
/sys/class/hwmon/hwmon2/device/fan3_pulses:2
/sys/class/hwmon/hwmon2/device/fan3_target:0
/sys/class/hwmon/hwmon2/device/fan3_tolerance:0
/sys/class/hwmon/hwmon2/device/fan4_alarm:0
/sys/class/hwmon/hwmon2/device/fan4_beep:0
/sys/class/hwmon/hwmon2/device/fan4_input:0
/sys/class/hwmon/hwmon2/device/fan4_min:0
/sys/class/hwmon/hwmon2/device/fan4_pulses:2
/sys/class/hwmon/hwmon2/device/fan4_target:0
/sys/class/hwmon/hwmon2/device/fan4_tolerance:0
/sys/class/hwmon/hwmon2/device/fan5_alarm:0
/sys/class/hwmon/hwmon2/device/fan5_beep:0
/sys/class/hwmon/hwmon2/device/fan5_input:0
/sys/class/hwmon/hwmon2/device/fan5_min:0
/sys/class/hwmon/hwmon2/device/fan5_pulses:2
/sys/class/hwmon/hwmon2/device/fan5_target:0
/sys/class/hwmon/hwmon2/device/fan5_tolerance:0
/sys/class/hwmon/hwmon2/device/in0_alarm:0
/sys/class/hwmon/hwmon2/device/in0_beep:0
/sys/class/hwmon/hwmon2/device/in0_input:928
/sys/class/hwmon/hwmon2/device/in0_max:1744
/sys/class/hwmon/hwmon2/device/in0_min:0
/sys/class/hwmon/hwmon2/device/in10_alarm:1
/sys/class/hwmon/hwmon2/device/in10_beep:0
/sys/class/hwmon/hwmon2/device/in10_input:216
/sys/class/hwmon/hwmon2/device/in10_max:0
/sys/class/hwmon/hwmon2/device/in10_min:0
/sys/class/hwmon/hwmon2/device/in11_alarm:1
/sys/class/hwmon/hwmon2/device/in11_beep:0
/sys/class/hwmon/hwmon2/device/in11_input:192
/sys/class/hwmon/hwmon2/device/in11_max:0
/sys/class/hwmon/hwmon2/device/in11_min:0
/sys/class/hwmon/hwmon2/device/in12_alarm:1
/sys/class/hwmon/hwmon2/device/in12_beep:0
/sys/class/hwmon/hwmon2/device/in12_input:184
/sys/class/hwmon/hwmon2/device/in12_max:0
/sys/class/hwmon/hwmon2/device/in12_min:0
/sys/class/hwmon/hwmon2/device/in13_alarm:1
/sys/class/hwmon/hwmon2/device/in13_beep:0
/sys/class/hwmon/hwmon2/device/in13_input:192
/sys/class/hwmon/hwmon2/device/in13_max:0
/sys/class/hwmon/hwmon2/device/in13_min:0
/sys/class/hwmon/hwmon2/device/in14_alarm:1
/sys/class/hwmon/hwmon2/device/in14_beep:0
/sys/class/hwmon/hwmon2/device/in14_input:192
/sys/class/hwmon/hwmon2/device/in14_max:0
/sys/class/hwmon/hwmon2/device/in14_min:0
/sys/class/hwmon/hwmon2/device/in1_alarm:1
/sys/class/hwmon/hwmon2/device/in1_beep:0
/sys/class/hwmon/hwmon2/device/in1_input:984
/sys/class/hwmon/hwmon2/device/in1_max:0
/sys/class/hwmon/hwmon2/device/in1_min:0
/sys/class/hwmon/hwmon2/device/in2_alarm:1
/sys/class/hwmon/hwmon2/device/in2_beep:0
/sys/class/hwmon/hwmon2/device/in2_input:3328
/sys/class/hwmon/hwmon2/device/in2_max:0
/sys/class/hwmon/hwmon2/device/in2_min:0
/sys/class/hwmon/hwmon2/device/in3_alarm:1
/sys/class/hwmon/hwmon2/device/in3_beep:0
/sys/class/hwmon/hwmon2/device/in3_input:3312
/sys/class/hwmon/hwmon2/device/in3_max:0
/sys/class/hwmon/hwmon2/device/in3_min:0
/sys/class/hwmon/hwmon2/device/in4_alarm:1
/sys/class/hwmon/hwmon2/device/in4_beep:0
/sys/class/hwmon/hwmon2/device/in4_input:1008
/sys/class/hwmon/hwmon2/device/in4_max:0
/sys/class/hwmon/hwmon2/device/in4_min:0
/sys/class/hwmon/hwmon2/device/in5_alarm:1
/sys/class/hwmon/hwmon2/device/in5_beep:0
/sys/class/hwmon/hwmon2/device/in5_input:216
/sys/class/hwmon/hwmon2/device/in5_max:0
/sys/class/hwmon/hwmon2/device/in5_min:0
/sys/class/hwmon/hwmon2/device/in6_alarm:1
/sys/class/hwmon/hwmon2/device/in6_beep:0
/sys/class/hwmon/hwmon2/device/in6_input:936
/sys/class/hwmon/hwmon2/device/in6_max:0
/sys/class/hwmon/hwmon2/device/in6_min:0
/sys/class/hwmon/hwmon2/device/in7_alarm:1
/sys/class/hwmon/hwmon2/device/in7_beep:0
/sys/class/hwmon/hwmon2/device/in7_input:3232
/sys/class/hwmon/hwmon2/device/in7_max:0
/sys/class/hwmon/hwmon2/device/in7_min:0
/sys/class/hwmon/hwmon2/device/in8_alarm:1
/sys/class/hwmon/hwmon2/device/in8_beep:0
/sys/class/hwmon/hwmon2/device/in8_input:3264
/sys/class/hwmon/hwmon2/device/in8_max:0
/sys/class/hwmon/hwmon2/device/in8_min:0
/sys/class/hwmon/hwmon2/device/in9_alarm:1
/sys/class/hwmon/hwmon2/device/in9_beep:0
/sys/class/hwmon/hwmon2/device/in9_input:1104
/sys/class/hwmon/hwmon2/device/in9_max:0
/sys/class/hwmon/hwmon2/device/in9_min:0
/sys/class/hwmon/hwmon2/device/intrusion0_alarm:1
/sys/class/hwmon/hwmon2/device/intrusion0_beep:0
/sys/class/hwmon/hwmon2/device/intrusion1_alarm:1
/sys/class/hwmon/hwmon2/device/intrusion1_beep:0
/sys/class/hwmon/hwmon2/device/modalias:platform:nct6775
/sys/class/hwmon/hwmon2/device/name:nct6791
/sys/class/hwmon/hwmon2/device/pwm1:164
/sys/class/hwmon/hwmon2/device/pwm1_auto_point1_pwm:153
/sys/class/hwmon/hwmon2/device/pwm1_auto_point1_temp:30000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point2_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point2_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm1_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm1_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm1_enable:5
/sys/class/hwmon/hwmon2/device/pwm1_floor:1
/sys/class/hwmon/hwmon2/device/pwm1_mode:1
/sys/class/hwmon/hwmon2/device/pwm1_start:1
/sys/class/hwmon/hwmon2/device/pwm1_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm1_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm1_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm1_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm1_temp_sel:7
/sys/class/hwmon/hwmon2/device/pwm1_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm2:0
/sys/class/hwmon/hwmon2/device/pwm2_auto_point1_pwm:51
/sys/class/hwmon/hwmon2/device/pwm2_auto_point1_temp:20000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point2_pwm:178
/sys/class/hwmon/hwmon2/device/pwm2_auto_point2_temp:70000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm2_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm2_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm2_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm2_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm2_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm2_enable:1
/sys/class/hwmon/hwmon2/device/pwm2_floor:1
/sys/class/hwmon/hwmon2/device/pwm2_mode:1
/sys/class/hwmon/hwmon2/device/pwm2_start:1
/sys/class/hwmon/hwmon2/device/pwm2_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm2_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm2_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm2_target_temp:50000
/sys/class/hwmon/hwmon2/device/pwm2_temp_sel:7
/sys/class/hwmon/hwmon2/device/pwm2_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_duty_base:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_duty_step:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_sel:1
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_step:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_step_base:0
/sys/class/hwmon/hwmon2/device/pwm2_weight_temp_step_tol:0
/sys/class/hwmon/hwmon2/device/pwm3:164
/sys/class/hwmon/hwmon2/device/pwm3_auto_point1_pwm:153
/sys/class/hwmon/hwmon2/device/pwm3_auto_point1_temp:30000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point2_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point2_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm3_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm3_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm3_enable:5
/sys/class/hwmon/hwmon2/device/pwm3_floor:1
/sys/class/hwmon/hwmon2/device/pwm3_mode:1
/sys/class/hwmon/hwmon2/device/pwm3_start:1
/sys/class/hwmon/hwmon2/device/pwm3_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm3_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm3_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm3_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm3_temp_sel:7
/sys/class/hwmon/hwmon2/device/pwm3_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm4:164
/sys/class/hwmon/hwmon2/device/pwm4_auto_point1_pwm:153
/sys/class/hwmon/hwmon2/device/pwm4_auto_point1_temp:30000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point2_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point2_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point3_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point3_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point4_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point4_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm4_auto_point5_temp:75000
/sys/class/hwmon/hwmon2/device/pwm4_crit_temp_tolerance:2000
/sys/class/hwmon/hwmon2/device/pwm4_enable:5
/sys/class/hwmon/hwmon2/device/pwm4_floor:1
/sys/class/hwmon/hwmon2/device/pwm4_mode:1
/sys/class/hwmon/hwmon2/device/pwm4_start:1
/sys/class/hwmon/hwmon2/device/pwm4_step_down_time:100
/sys/class/hwmon/hwmon2/device/pwm4_step_up_time:100
/sys/class/hwmon/hwmon2/device/pwm4_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm4_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm4_temp_sel:7
/sys/class/hwmon/hwmon2/device/pwm4_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm5:255
/sys/class/hwmon/hwmon2/device/pwm5_auto_point1_pwm:140
/sys/class/hwmon/hwmon2/device/pwm5_auto_point1_temp:25000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point2_pwm:170
/sys/class/hwmon/hwmon2/device/pwm5_auto_point2_temp:35000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point3_pwm:200
/sys/class/hwmon/hwmon2/device/pwm5_auto_point3_temp:45000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point4_pwm:230
/sys/class/hwmon/hwmon2/device/pwm5_auto_point4_temp:55000
/sys/class/hwmon/hwmon2/device/pwm5_auto_point5_pwm:255
/sys/class/hwmon/hwmon2/device/pwm5_auto_point5_temp:60000
/sys/class/hwmon/hwmon2/device/pwm5_crit_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/pwm5_enable:0
/sys/class/hwmon/hwmon2/device/pwm5_floor:1
/sys/class/hwmon/hwmon2/device/pwm5_mode:1
/sys/class/hwmon/hwmon2/device/pwm5_start:1
/sys/class/hwmon/hwmon2/device/pwm5_step_down_time:1000
/sys/class/hwmon/hwmon2/device/pwm5_step_up_time:1000
/sys/class/hwmon/hwmon2/device/pwm5_stop_time:6000
/sys/class/hwmon/hwmon2/device/pwm5_target_temp:0
/sys/class/hwmon/hwmon2/device/pwm5_temp_sel:3
/sys/class/hwmon/hwmon2/device/pwm5_temp_tolerance:0
/sys/class/hwmon/hwmon2/device/temp10_input:0
/sys/class/hwmon/hwmon2/device/temp10_label:PCH_CPU_TEMP
/sys/class/hwmon/hwmon2/device/temp1_input:102000
/sys/class/hwmon/hwmon2/device/temp1_label:SYSTIN
/sys/class/hwmon/hwmon2/device/temp1_max:0
/sys/class/hwmon/hwmon2/device/temp1_max_hyst:0
/sys/class/hwmon/hwmon2/device/temp1_offset:0
/sys/class/hwmon/hwmon2/device/temp1_type:4
/sys/class/hwmon/hwmon2/device/temp2_alarm:0
/sys/class/hwmon/hwmon2/device/temp2_beep:0
/sys/class/hwmon/hwmon2/device/temp2_input:37000
/sys/class/hwmon/hwmon2/device/temp2_label:CPUTIN
/sys/class/hwmon/hwmon2/device/temp2_max:80000
/sys/class/hwmon/hwmon2/device/temp2_max_hyst:75000
/sys/class/hwmon/hwmon2/device/temp2_offset:0
/sys/class/hwmon/hwmon2/device/temp2_type:4
/sys/class/hwmon/hwmon2/device/temp3_alarm:1
/sys/class/hwmon/hwmon2/device/temp3_beep:0
/sys/class/hwmon/hwmon2/device/temp3_input:29000
/sys/class/hwmon/hwmon2/device/temp3_label:AUXTIN0
/sys/class/hwmon/hwmon2/device/temp3_max:0
/sys/class/hwmon/hwmon2/device/temp3_max_hyst:0
/sys/class/hwmon/hwmon2/device/temp3_offset:0
/sys/class/hwmon/hwmon2/device/temp3_type:4
/sys/class/hwmon/hwmon2/device/temp4_input:94000
/sys/class/hwmon/hwmon2/device/temp4_label:AUXTIN1
/sys/class/hwmon/hwmon2/device/temp4_offset:0
/sys/class/hwmon/hwmon2/device/temp4_type:4
/sys/class/hwmon/hwmon2/device/temp5_input:93000
/sys/class/hwmon/hwmon2/device/temp5_label:AUXTIN2
/sys/class/hwmon/hwmon2/device/temp5_offset:0
/sys/class/hwmon/hwmon2/device/temp5_type:4
/sys/class/hwmon/hwmon2/device/temp6_input:93000
/sys/class/hwmon/hwmon2/device/temp6_label:AUXTIN3
/sys/class/hwmon/hwmon2/device/temp6_offset:0
/sys/class/hwmon/hwmon2/device/temp6_type:4
/sys/class/hwmon/hwmon2/device/temp7_input:35500
/sys/class/hwmon/hwmon2/device/temp7_label:PECI Agent 0
/sys/class/hwmon/hwmon2/device/temp8_input:0
/sys/class/hwmon/hwmon2/device/temp8_label:PCH_CHIP_CPU_MAX_TEMP
/sys/class/hwmon/hwmon2/device/temp9_input:0
/sys/class/hwmon/hwmon2/device/temp9_label:PCH_CHIP_TEMP
/sys/class/hwmon/hwmon2/device/uevent:DRIVER=nct6775
/sys/class/hwmon/hwmon2/device/uevent:MODALIAS=platform:nct6775
[-- Attachment #3: Type: text/plain, Size: 153 bytes --]
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (42 preceding siblings ...)
2013-11-13 18:00 ` p. stephen w
@ 2013-11-13 20:42 ` Guenter Roeck
2013-11-13 20:54 ` p. stephen w
44 siblings, 0 replies; 46+ messages in thread
From: Guenter Roeck @ 2013-11-13 20:42 UTC (permalink / raw)
To: lm-sensors
On Wed, Nov 13, 2013 at 10:00:10AM -0800, p. stephen w wrote:
> Just in case, I re-ran the commands making sure only the latest driver was
> being used. See attached.
>
Excellent. Looks like all is as expected now.
Thanks a lot for testing!
Guenter
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] Nuvoton NCT6791D support
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
` (43 preceding siblings ...)
2013-11-13 20:42 ` Guenter Roeck
@ 2013-11-13 20:54 ` p. stephen w
44 siblings, 0 replies; 46+ messages in thread
From: p. stephen w @ 2013-11-13 20:54 UTC (permalink / raw)
To: lm-sensors
glad to help. Hit me up anytime.
On Wed, Nov 13, 2013 at 12:42 PM, Guenter Roeck <linux@roeck-us.net> wrote:
> On Wed, Nov 13, 2013 at 10:00:10AM -0800, p. stephen w wrote:
> > Just in case, I re-ran the commands making sure only the latest driver
> was
> > being used. See attached.
> >
> Excellent. Looks like all is as expected now.
>
> Thanks a lot for testing!
>
> Guenter
>
--
_____________________________
Stephen Wille | pstephenwille.com
*new address p.stephenwille@gmail.com <p.stephenwille@gmail.com>*
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 46+ messages in thread
end of thread, other threads:[~2013-11-13 20:54 UTC | newest]
Thread overview: 46+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-11-11 5:25 [lm-sensors] Nuvoton NCT6791D support p. stephen w
2013-11-11 14:28 ` Guenter Roeck
2013-11-11 17:04 ` p. stephen w
2013-11-11 17:38 ` Guenter Roeck
2013-11-11 18:17 ` p. stephen w
2013-11-11 18:29 ` Guenter Roeck
2013-11-11 18:31 ` p. stephen w
2013-11-11 19:11 ` Guenter Roeck
2013-11-11 19:17 ` p. stephen w
2013-11-11 19:46 ` p. stephen w
2013-11-11 19:50 ` Guenter Roeck
2013-11-11 20:32 ` p. stephen w
2013-11-11 21:22 ` Jean Delvare
2013-11-11 22:00 ` Guenter Roeck
2013-11-11 22:45 ` p. stephen w
2013-11-11 23:18 ` Guenter Roeck
2013-11-12 0:47 ` p. stephen w
2013-11-12 0:57 ` p. stephen w
2013-11-12 2:37 ` Guenter Roeck
2013-11-12 3:24 ` p. stephen w
2013-11-12 4:05 ` Guenter Roeck
2013-11-12 5:22 ` Guenter Roeck
2013-11-12 6:25 ` p. stephen w
2013-11-12 7:04 ` Jean Delvare
2013-11-12 7:14 ` Jean Delvare
2013-11-12 7:27 ` p. stephen w
2013-11-12 14:20 ` Guenter Roeck
2013-11-12 14:23 ` Guenter Roeck
2013-11-12 17:23 ` Guenter Roeck
2013-11-12 17:24 ` p. stephen w
2013-11-12 17:30 ` Guenter Roeck
2013-11-13 3:40 ` Guenter Roeck
2013-11-13 4:07 ` p. stephen w
2013-11-13 4:29 ` Guenter Roeck
2013-11-13 4:38 ` p. stephen w
2013-11-13 5:10 ` Guenter Roeck
2013-11-13 5:17 ` p. stephen w
2013-11-13 6:16 ` Guenter Roeck
2013-11-13 7:01 ` p. stephen w
2013-11-13 14:26 ` Guenter Roeck
2013-11-13 17:33 ` Guenter Roeck
2013-11-13 17:37 ` p. stephen w
2013-11-13 17:40 ` p. stephen w
2013-11-13 18:00 ` p. stephen w
2013-11-13 20:42 ` Guenter Roeck
2013-11-13 20:54 ` p. stephen w
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.