* [PATCH 1/5] arm64: dts: qcom: msm8996: Drop flags for mdss irqs
@ 2022-03-02 0:52 ` Dmitry Baryshkov
0 siblings, 0 replies; 20+ messages in thread
From: Dmitry Baryshkov @ 2022-03-02 0:52 UTC (permalink / raw)
To: Bjorn Andersson, Rob Clark, Sean Paul, Abhinav Kumar,
Rob Herring, Krzysztof Kozlowski
Cc: Stephen Boyd, David Airlie, Daniel Vetter, linux-arm-msm,
devicetree, dri-devel, freedreno
The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two.
Drop the second cell containing (unused) irq flags.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index f0f81c23c16f..0597d865a4a6 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -788,7 +788,7 @@ mdp: mdp@901000 {
reg-names = "mdp_phys";
interrupt-parent = <&mdss>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <0>;
clocks = <&mmcc MDSS_AHB_CLK>,
<&mmcc MDSS_AXI_CLK>,
@@ -834,7 +834,7 @@ dsi0: dsi@994000 {
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
- interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <4>;
clocks = <&mmcc MDSS_MDP_CLK>,
<&mmcc MDSS_BYTE0_CLK>,
@@ -904,7 +904,7 @@ hdmi: hdmi-tx@9a0000 {
"hdcp_physical";
interrupt-parent = <&mdss>;
- interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <8>;
clocks = <&mmcc MDSS_MDP_CLK>,
<&mmcc MDSS_AHB_CLK>,
--
2.34.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 1/5] arm64: dts: qcom: msm8996: Drop flags for mdss irqs
@ 2022-03-02 0:52 ` Dmitry Baryshkov
0 siblings, 0 replies; 20+ messages in thread
From: Dmitry Baryshkov @ 2022-03-02 0:52 UTC (permalink / raw)
To: Bjorn Andersson, Rob Clark, Sean Paul, Abhinav Kumar,
Rob Herring, Krzysztof Kozlowski
Cc: devicetree, David Airlie, linux-arm-msm, dri-devel, Stephen Boyd,
freedreno
The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two.
Drop the second cell containing (unused) irq flags.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index f0f81c23c16f..0597d865a4a6 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -788,7 +788,7 @@ mdp: mdp@901000 {
reg-names = "mdp_phys";
interrupt-parent = <&mdss>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <0>;
clocks = <&mmcc MDSS_AHB_CLK>,
<&mmcc MDSS_AXI_CLK>,
@@ -834,7 +834,7 @@ dsi0: dsi@994000 {
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
- interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <4>;
clocks = <&mmcc MDSS_MDP_CLK>,
<&mmcc MDSS_BYTE0_CLK>,
@@ -904,7 +904,7 @@ hdmi: hdmi-tx@9a0000 {
"hdcp_physical";
interrupt-parent = <&mdss>;
- interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <8>;
clocks = <&mmcc MDSS_MDP_CLK>,
<&mmcc MDSS_AHB_CLK>,
--
2.34.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 2/5] arm64: dts: qcom: sdm630: Drop flags for mdss irqs
2022-03-02 0:52 ` Dmitry Baryshkov
@ 2022-03-02 0:52 ` Dmitry Baryshkov
-1 siblings, 0 replies; 20+ messages in thread
From: Dmitry Baryshkov @ 2022-03-02 0:52 UTC (permalink / raw)
To: Bjorn Andersson, Rob Clark, Sean Paul, Abhinav Kumar,
Rob Herring, Krzysztof Kozlowski
Cc: Stephen Boyd, David Airlie, Daniel Vetter, linux-arm-msm,
devicetree, dri-devel, freedreno
The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two.
Drop the second cell containing (unused) irq flags.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sdm630.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 240293592ef9..7f875bf9390a 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -1453,7 +1453,7 @@ mdp: mdp@c901000 {
reg-names = "mdp_phys";
interrupt-parent = <&mdss>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <0>;
assigned-clocks = <&mmcc MDSS_MDP_CLK>,
<&mmcc MDSS_VSYNC_CLK>;
@@ -1530,7 +1530,7 @@ dsi0: dsi@c994000 {
power-domains = <&rpmpd SDM660_VDDCX>;
interrupt-parent = <&mdss>;
- interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <4>;
assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
<&mmcc PCLK0_CLK_SRC>;
--
2.34.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 2/5] arm64: dts: qcom: sdm630: Drop flags for mdss irqs
@ 2022-03-02 0:52 ` Dmitry Baryshkov
0 siblings, 0 replies; 20+ messages in thread
From: Dmitry Baryshkov @ 2022-03-02 0:52 UTC (permalink / raw)
To: Bjorn Andersson, Rob Clark, Sean Paul, Abhinav Kumar,
Rob Herring, Krzysztof Kozlowski
Cc: devicetree, David Airlie, linux-arm-msm, dri-devel, Stephen Boyd,
freedreno
The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two.
Drop the second cell containing (unused) irq flags.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sdm630.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 240293592ef9..7f875bf9390a 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -1453,7 +1453,7 @@ mdp: mdp@c901000 {
reg-names = "mdp_phys";
interrupt-parent = <&mdss>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <0>;
assigned-clocks = <&mmcc MDSS_MDP_CLK>,
<&mmcc MDSS_VSYNC_CLK>;
@@ -1530,7 +1530,7 @@ dsi0: dsi@c994000 {
power-domains = <&rpmpd SDM660_VDDCX>;
interrupt-parent = <&mdss>;
- interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <4>;
assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
<&mmcc PCLK0_CLK_SRC>;
--
2.34.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 3/5] arm64: dts: qcom: sdm660: Drop flags for mdss irqs
2022-03-02 0:52 ` Dmitry Baryshkov
@ 2022-03-02 0:52 ` Dmitry Baryshkov
-1 siblings, 0 replies; 20+ messages in thread
From: Dmitry Baryshkov @ 2022-03-02 0:52 UTC (permalink / raw)
To: Bjorn Andersson, Rob Clark, Sean Paul, Abhinav Kumar,
Rob Herring, Krzysztof Kozlowski
Cc: Stephen Boyd, David Airlie, Daniel Vetter, linux-arm-msm,
devicetree, dri-devel, freedreno
The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two.
Drop the second cell containing (unused) irq flags.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sdm660.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm660.dtsi b/arch/arm64/boot/dts/qcom/sdm660.dtsi
index eccf6fde16b4..1d748c5305f4 100644
--- a/arch/arm64/boot/dts/qcom/sdm660.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm660.dtsi
@@ -163,7 +163,7 @@ dsi1: dsi@c996000 {
power-domains = <&rpmpd SDM660_VDDCX>;
interrupt-parent = <&mdss>;
- interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <5>;
assigned-clocks = <&mmcc BYTE1_CLK_SRC>,
<&mmcc PCLK1_CLK_SRC>;
--
2.34.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 3/5] arm64: dts: qcom: sdm660: Drop flags for mdss irqs
@ 2022-03-02 0:52 ` Dmitry Baryshkov
0 siblings, 0 replies; 20+ messages in thread
From: Dmitry Baryshkov @ 2022-03-02 0:52 UTC (permalink / raw)
To: Bjorn Andersson, Rob Clark, Sean Paul, Abhinav Kumar,
Rob Herring, Krzysztof Kozlowski
Cc: devicetree, David Airlie, linux-arm-msm, dri-devel, Stephen Boyd,
freedreno
The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two.
Drop the second cell containing (unused) irq flags.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sdm660.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm660.dtsi b/arch/arm64/boot/dts/qcom/sdm660.dtsi
index eccf6fde16b4..1d748c5305f4 100644
--- a/arch/arm64/boot/dts/qcom/sdm660.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm660.dtsi
@@ -163,7 +163,7 @@ dsi1: dsi@c996000 {
power-domains = <&rpmpd SDM660_VDDCX>;
interrupt-parent = <&mdss>;
- interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <5>;
assigned-clocks = <&mmcc BYTE1_CLK_SRC>,
<&mmcc PCLK1_CLK_SRC>;
--
2.34.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 4/5] arm64: dts: qcom: sdm845: Drop flags for mdss irqs
2022-03-02 0:52 ` Dmitry Baryshkov
@ 2022-03-02 0:52 ` Dmitry Baryshkov
-1 siblings, 0 replies; 20+ messages in thread
From: Dmitry Baryshkov @ 2022-03-02 0:52 UTC (permalink / raw)
To: Bjorn Andersson, Rob Clark, Sean Paul, Abhinav Kumar,
Rob Herring, Krzysztof Kozlowski
Cc: Stephen Boyd, David Airlie, Daniel Vetter, linux-arm-msm,
devicetree, dri-devel, freedreno
The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two.
Drop the second cell containing (unused) irq flags.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 41f4e46e1f85..95e6a97c2170 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -4281,7 +4281,7 @@ mdss_mdp: mdp@ae01000 {
power-domains = <&rpmhpd SDM845_CX>;
interrupt-parent = <&mdss>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <0>;
ports {
#address-cells = <1>;
@@ -4333,7 +4333,7 @@ dsi0: dsi@ae94000 {
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
- interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <4>;
clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
<&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
@@ -4405,7 +4405,7 @@ dsi1: dsi@ae96000 {
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
- interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <5>;
clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
<&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
--
2.34.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 4/5] arm64: dts: qcom: sdm845: Drop flags for mdss irqs
@ 2022-03-02 0:52 ` Dmitry Baryshkov
0 siblings, 0 replies; 20+ messages in thread
From: Dmitry Baryshkov @ 2022-03-02 0:52 UTC (permalink / raw)
To: Bjorn Andersson, Rob Clark, Sean Paul, Abhinav Kumar,
Rob Herring, Krzysztof Kozlowski
Cc: devicetree, David Airlie, linux-arm-msm, dri-devel, Stephen Boyd,
freedreno
The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two.
Drop the second cell containing (unused) irq flags.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 41f4e46e1f85..95e6a97c2170 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -4281,7 +4281,7 @@ mdss_mdp: mdp@ae01000 {
power-domains = <&rpmhpd SDM845_CX>;
interrupt-parent = <&mdss>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <0>;
ports {
#address-cells = <1>;
@@ -4333,7 +4333,7 @@ dsi0: dsi@ae94000 {
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
- interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <4>;
clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
<&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
@@ -4405,7 +4405,7 @@ dsi1: dsi@ae96000 {
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
- interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <5>;
clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
<&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
--
2.34.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 5/5] arm64: dts: qcom: sm8250: Drop flags for mdss irqs
2022-03-02 0:52 ` Dmitry Baryshkov
@ 2022-03-02 0:52 ` Dmitry Baryshkov
-1 siblings, 0 replies; 20+ messages in thread
From: Dmitry Baryshkov @ 2022-03-02 0:52 UTC (permalink / raw)
To: Bjorn Andersson, Rob Clark, Sean Paul, Abhinav Kumar,
Rob Herring, Krzysztof Kozlowski
Cc: Stephen Boyd, David Airlie, Daniel Vetter, linux-arm-msm,
devicetree, dri-devel, freedreno
The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two.
Drop the second cell containing (unused) irq flags.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index fdaf303ba047..956848068871 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -3200,7 +3200,7 @@ mdss_mdp: mdp@ae01000 {
power-domains = <&rpmhpd SM8250_MMCX>;
interrupt-parent = <&mdss>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <0>;
ports {
#address-cells = <1>;
@@ -3252,7 +3252,7 @@ dsi0: dsi@ae94000 {
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
- interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <4>;
clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
<&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
@@ -3325,7 +3325,7 @@ dsi1: dsi@ae96000 {
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
- interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <5>;
clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
<&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
--
2.34.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH 5/5] arm64: dts: qcom: sm8250: Drop flags for mdss irqs
@ 2022-03-02 0:52 ` Dmitry Baryshkov
0 siblings, 0 replies; 20+ messages in thread
From: Dmitry Baryshkov @ 2022-03-02 0:52 UTC (permalink / raw)
To: Bjorn Andersson, Rob Clark, Sean Paul, Abhinav Kumar,
Rob Herring, Krzysztof Kozlowski
Cc: devicetree, David Airlie, linux-arm-msm, dri-devel, Stephen Boyd,
freedreno
The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two.
Drop the second cell containing (unused) irq flags.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index fdaf303ba047..956848068871 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -3200,7 +3200,7 @@ mdss_mdp: mdp@ae01000 {
power-domains = <&rpmhpd SM8250_MMCX>;
interrupt-parent = <&mdss>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <0>;
ports {
#address-cells = <1>;
@@ -3252,7 +3252,7 @@ dsi0: dsi@ae94000 {
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
- interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <4>;
clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
<&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
@@ -3325,7 +3325,7 @@ dsi1: dsi@ae96000 {
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
- interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <5>;
clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
<&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
--
2.34.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [PATCH 1/5] arm64: dts: qcom: msm8996: Drop flags for mdss irqs
2022-03-02 0:52 ` Dmitry Baryshkov
@ 2022-03-02 1:38 ` Stephen Boyd
-1 siblings, 0 replies; 20+ messages in thread
From: Stephen Boyd @ 2022-03-02 1:38 UTC (permalink / raw)
To: Abhinav Kumar, Bjorn Andersson, Dmitry Baryshkov,
Krzysztof Kozlowski, Rob Clark, Rob Herring, Sean Paul
Cc: David Airlie, Daniel Vetter, linux-arm-msm, devicetree,
dri-devel, freedreno
Quoting Dmitry Baryshkov (2022-03-01 16:52:06)
> The number of interrupt cells for the mdss interrupt controller is 1,
> meaning there should only be one cell for the interrupt number, not two.
> Drop the second cell containing (unused) irq flags.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 1/5] arm64: dts: qcom: msm8996: Drop flags for mdss irqs
@ 2022-03-02 1:38 ` Stephen Boyd
0 siblings, 0 replies; 20+ messages in thread
From: Stephen Boyd @ 2022-03-02 1:38 UTC (permalink / raw)
To: Abhinav Kumar, Bjorn Andersson, Dmitry Baryshkov,
Krzysztof Kozlowski, Rob Clark, Rob Herring, Sean Paul
Cc: devicetree, David Airlie, linux-arm-msm, dri-devel, freedreno
Quoting Dmitry Baryshkov (2022-03-01 16:52:06)
> The number of interrupt cells for the mdss interrupt controller is 1,
> meaning there should only be one cell for the interrupt number, not two.
> Drop the second cell containing (unused) irq flags.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 2/5] arm64: dts: qcom: sdm630: Drop flags for mdss irqs
2022-03-02 0:52 ` Dmitry Baryshkov
@ 2022-03-02 1:39 ` Stephen Boyd
-1 siblings, 0 replies; 20+ messages in thread
From: Stephen Boyd @ 2022-03-02 1:39 UTC (permalink / raw)
To: Abhinav Kumar, Bjorn Andersson, Dmitry Baryshkov,
Krzysztof Kozlowski, Rob Clark, Rob Herring, Sean Paul
Cc: David Airlie, Daniel Vetter, linux-arm-msm, devicetree,
dri-devel, freedreno
Quoting Dmitry Baryshkov (2022-03-01 16:52:07)
> The number of interrupt cells for the mdss interrupt controller is 1,
> meaning there should only be one cell for the interrupt number, not two.
> Drop the second cell containing (unused) irq flags.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 2/5] arm64: dts: qcom: sdm630: Drop flags for mdss irqs
@ 2022-03-02 1:39 ` Stephen Boyd
0 siblings, 0 replies; 20+ messages in thread
From: Stephen Boyd @ 2022-03-02 1:39 UTC (permalink / raw)
To: Abhinav Kumar, Bjorn Andersson, Dmitry Baryshkov,
Krzysztof Kozlowski, Rob Clark, Rob Herring, Sean Paul
Cc: devicetree, David Airlie, linux-arm-msm, dri-devel, freedreno
Quoting Dmitry Baryshkov (2022-03-01 16:52:07)
> The number of interrupt cells for the mdss interrupt controller is 1,
> meaning there should only be one cell for the interrupt number, not two.
> Drop the second cell containing (unused) irq flags.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 3/5] arm64: dts: qcom: sdm660: Drop flags for mdss irqs
2022-03-02 0:52 ` Dmitry Baryshkov
@ 2022-03-02 1:39 ` Stephen Boyd
-1 siblings, 0 replies; 20+ messages in thread
From: Stephen Boyd @ 2022-03-02 1:39 UTC (permalink / raw)
To: Abhinav Kumar, Bjorn Andersson, Dmitry Baryshkov,
Krzysztof Kozlowski, Rob Clark, Rob Herring, Sean Paul
Cc: David Airlie, Daniel Vetter, linux-arm-msm, devicetree,
dri-devel, freedreno
Quoting Dmitry Baryshkov (2022-03-01 16:52:08)
> The number of interrupt cells for the mdss interrupt controller is 1,
> meaning there should only be one cell for the interrupt number, not two.
> Drop the second cell containing (unused) irq flags.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 3/5] arm64: dts: qcom: sdm660: Drop flags for mdss irqs
@ 2022-03-02 1:39 ` Stephen Boyd
0 siblings, 0 replies; 20+ messages in thread
From: Stephen Boyd @ 2022-03-02 1:39 UTC (permalink / raw)
To: Abhinav Kumar, Bjorn Andersson, Dmitry Baryshkov,
Krzysztof Kozlowski, Rob Clark, Rob Herring, Sean Paul
Cc: devicetree, David Airlie, linux-arm-msm, dri-devel, freedreno
Quoting Dmitry Baryshkov (2022-03-01 16:52:08)
> The number of interrupt cells for the mdss interrupt controller is 1,
> meaning there should only be one cell for the interrupt number, not two.
> Drop the second cell containing (unused) irq flags.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 4/5] arm64: dts: qcom: sdm845: Drop flags for mdss irqs
2022-03-02 0:52 ` Dmitry Baryshkov
@ 2022-03-02 1:39 ` Stephen Boyd
-1 siblings, 0 replies; 20+ messages in thread
From: Stephen Boyd @ 2022-03-02 1:39 UTC (permalink / raw)
To: Abhinav Kumar, Bjorn Andersson, Dmitry Baryshkov,
Krzysztof Kozlowski, Rob Clark, Rob Herring, Sean Paul
Cc: David Airlie, Daniel Vetter, linux-arm-msm, devicetree,
dri-devel, freedreno
Quoting Dmitry Baryshkov (2022-03-01 16:52:09)
> The number of interrupt cells for the mdss interrupt controller is 1,
> meaning there should only be one cell for the interrupt number, not two.
> Drop the second cell containing (unused) irq flags.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 4/5] arm64: dts: qcom: sdm845: Drop flags for mdss irqs
@ 2022-03-02 1:39 ` Stephen Boyd
0 siblings, 0 replies; 20+ messages in thread
From: Stephen Boyd @ 2022-03-02 1:39 UTC (permalink / raw)
To: Abhinav Kumar, Bjorn Andersson, Dmitry Baryshkov,
Krzysztof Kozlowski, Rob Clark, Rob Herring, Sean Paul
Cc: devicetree, David Airlie, linux-arm-msm, dri-devel, freedreno
Quoting Dmitry Baryshkov (2022-03-01 16:52:09)
> The number of interrupt cells for the mdss interrupt controller is 1,
> meaning there should only be one cell for the interrupt number, not two.
> Drop the second cell containing (unused) irq flags.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 5/5] arm64: dts: qcom: sm8250: Drop flags for mdss irqs
2022-03-02 0:52 ` Dmitry Baryshkov
@ 2022-03-02 1:39 ` Stephen Boyd
-1 siblings, 0 replies; 20+ messages in thread
From: Stephen Boyd @ 2022-03-02 1:39 UTC (permalink / raw)
To: Abhinav Kumar, Bjorn Andersson, Dmitry Baryshkov,
Krzysztof Kozlowski, Rob Clark, Rob Herring, Sean Paul
Cc: David Airlie, Daniel Vetter, linux-arm-msm, devicetree,
dri-devel, freedreno
Quoting Dmitry Baryshkov (2022-03-01 16:52:10)
> The number of interrupt cells for the mdss interrupt controller is 1,
> meaning there should only be one cell for the interrupt number, not two.
> Drop the second cell containing (unused) irq flags.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH 5/5] arm64: dts: qcom: sm8250: Drop flags for mdss irqs
@ 2022-03-02 1:39 ` Stephen Boyd
0 siblings, 0 replies; 20+ messages in thread
From: Stephen Boyd @ 2022-03-02 1:39 UTC (permalink / raw)
To: Abhinav Kumar, Bjorn Andersson, Dmitry Baryshkov,
Krzysztof Kozlowski, Rob Clark, Rob Herring, Sean Paul
Cc: devicetree, David Airlie, linux-arm-msm, dri-devel, freedreno
Quoting Dmitry Baryshkov (2022-03-01 16:52:10)
> The number of interrupt cells for the mdss interrupt controller is 1,
> meaning there should only be one cell for the interrupt number, not two.
> Drop the second cell containing (unused) irq flags.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2022-03-02 1:39 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-03-02 0:52 [PATCH 1/5] arm64: dts: qcom: msm8996: Drop flags for mdss irqs Dmitry Baryshkov
2022-03-02 0:52 ` Dmitry Baryshkov
2022-03-02 0:52 ` [PATCH 2/5] arm64: dts: qcom: sdm630: " Dmitry Baryshkov
2022-03-02 0:52 ` Dmitry Baryshkov
2022-03-02 1:39 ` Stephen Boyd
2022-03-02 1:39 ` Stephen Boyd
2022-03-02 0:52 ` [PATCH 3/5] arm64: dts: qcom: sdm660: " Dmitry Baryshkov
2022-03-02 0:52 ` Dmitry Baryshkov
2022-03-02 1:39 ` Stephen Boyd
2022-03-02 1:39 ` Stephen Boyd
2022-03-02 0:52 ` [PATCH 4/5] arm64: dts: qcom: sdm845: " Dmitry Baryshkov
2022-03-02 0:52 ` Dmitry Baryshkov
2022-03-02 1:39 ` Stephen Boyd
2022-03-02 1:39 ` Stephen Boyd
2022-03-02 0:52 ` [PATCH 5/5] arm64: dts: qcom: sm8250: " Dmitry Baryshkov
2022-03-02 0:52 ` Dmitry Baryshkov
2022-03-02 1:39 ` Stephen Boyd
2022-03-02 1:39 ` Stephen Boyd
2022-03-02 1:38 ` [PATCH 1/5] arm64: dts: qcom: msm8996: " Stephen Boyd
2022-03-02 1:38 ` Stephen Boyd
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.